Whirlpool WFC8090GX Manuel utilisateur

Catégorie
Machines à laver
Taper
Manuel utilisateur
W11114293A
W11132621A–SP
If you have any problems or questions, visit us at www.whirlpool.com.
Pour tout problème ou toute question, consulter www.whirlpool.ca.
Connect your Smart All-In-One Washer and Dryer with your mobile device
at www.whirlpool.com/connect (in Canada, www.whirlpool.ca/en_ca.html)
Connecter votre laveuse et sécheuse intelligente combinées avec votre appareil mobile
à www.whirlpool.ca/fr_ca.html)
Designed to use only HE
High Efciency detergents.
Conçue pour l’utilisation
d’un détergent haute
efcacité seulement.
Use and Care Guide and Installation Instructions
Guide d’utilisation et d’entretien
et Instructions d’installation
Para obtener acceso
al Manual de uso y
cuidado en español, o para
obtener información adicional
acerca de su producto, visite:
www.whirlpool.com
Smart All-In-One Washer and Dryer
Laveuse et sécheuse intelligente combinées
2
Table of Contents
ALL-IN-ONE WASHER/DRYER SAFETY .............................. 2
ACCESSORIES ....................................................................... 4
OPERATING INSTRUCTIONS ............................................... 5
Control Panel and Features ............................................. 5
Cycle Guides ................................................................... 6
Choosing the Right Detergent .......................................... 9
Using the Load & Go
Bulk Dispenser .............................9
Using the All-In-One Washer/Dryer ................................10
All-In-One Washer/Dryer Maintenance ...........................15
INSTALLATION INSTRUCTIONS ......................................... 19
Installation Requirements .............................................. 19
Location Requirements ................................................. 20
Drain System ................................................................. 22
Unpacking Washer/Dryer ...............................................23
Electrical Requirements – U.S.A Only. ...........................24
Electrical Requirements – Canada Only .........................25
Electrical Installation – U.S.A. Only ................................25
Route Drain Hose ...........................................................29
Connect Inlet Hose .........................................................29
Level Washer/Dryer.........................................................30
Plug in Washer/Dryer ......................................................31
Complete Installation Checklist. .....................................32
Internet Connectivity Guide. ...........................................32
TROUBLESHOOTING ...........................................................33
Manually Unlocking the Door. ........................................44
CONNECTED APPLIANCE REGULATORY NOTICES ........45
WARRANTY ........................................................................... 47
ASSISTANCE OR SERVICE .................................. Back Cover
Table des matières
SÉCURITÉ DE LA LAVEUSE/SÉCHEUSE .......................... 48
ACCESSOIRES ..................................................................... 50
INSTRUCTIONS D'UTILISATION ........................................ 51
Tableau de commande et caractéristiques ................... 51
Guide des programmes ................................................. 52
Choix du détergent approprié ........................................55
Utilisation du distributeur Load & Go
...........................55
Utilisation de la laveuse/sécheuse combinée ................56
Entretien de la laveuse/sécheuse combinée ..................61
INSTRUCTIONS D’INSTALLATION ..................................... 65
Exigences d’installation ................................................. 65
Exigences d’emplacement ............................................ 66
Système de vidange ...................................................... 68
Déballage de la laveuse/sécheuse ................................ 69
Spécications électriques ..............................................70
Acheminer le tuyau de vidange ......................................71
Raccorder le tuyau d’arrivée ..........................................71
Réglage de l’aplomb de la laveuse/sécheuse. ............... 72
Brancher la laveuse/sécheuse. ......................................73
Liste de vérication pour installation terminée ............... 74
Guide de connexion Internet .......................................... 74
DÉPANNAGE .........................................................................75
Déverrouillage manuel de la porte ..................................87
AVIS D’APPLICATION DE LA RÉGLEMENTATION
DE LA CONNEXION DES ÉLECTROMÉNAGERS ............... 88
GARANTIE .............................................................................90
ASSISTANCE OU SERVICE ...................... Couverture arrière
ALL-IN-ONE WASHER/DRYER SAFETY
3
4
Customize your new washer/dryer with the following
genuine Whirlpool accessory. For more information on
options and ordering, call 1-866-698-2538 or visit us at:
www.whirlpool.com. In Canada, call 1-800-688-2002
or visit us at www.whirlpool.ca.
INSTALLATION & MAINTENANCE
ACCESSORIES
FACTORY CERTIFIED PARTS – these three
words represent quality parts and accessories
designed specically for your appliance.
Time tested engineering that meets
our strict quality specications.
FACTORY CERTIFIED PARTS
Accessories designed for your appliance:
12" Pedestal
Color-matched pedestal raises the
washer/dryer to a more comfortable
working height.
ACCESSORIES
5
OPERATING INSTRUCTIONS
Control Panel and Features
POWER BUTTON
Touch to power up the washer/dryer.
HOME BUTTON
Touch this button and the LCD screen will show the
home screen, where you can select your cycle, settings,
and options.
FAVORITES BUTTON
Stores and accesses your favorite cycles.
LCD SCREEN
Use this screen to select cycle, settings, options, etc.
REMOTE ENABLE BUTTON
Touch this button to be able to use the Whirlpool
app
to control the washer/dryer. Download the Whirlpool
app
and follow the instructions to connect your washer/dryer
to your home Wi-Fi network. You may also visit
www.whirlpool.com/connect. In Canada, visit
www.whirlpool.ca/en_ca.html and click on the
Whirlpool
®
Connected Appliances link.
TOOLS BUTTON
Touch this button to access the tools screen. For more
information, see page 13.
START/PAUSE BUTTON
Touch to start, or touch to pause a cycle. When you start a
cycle, the door will lock, the washer/dryer will sense the load
size, and the wash or dry cycle will begin.
1
2
3
5
7
6
7
7
1
3
2
6
5
74
4
Temperature
WARM
Spin Speed
EXTRA FAST
Auto Dry
Dry
What to Wash
REGULAR
How to Wash
NORMAL
4:28
3:15
Dispenser 1
This dispenser holds 33.8 oz (1000 mL) of liquid HE
detergent for your main wash cycle, and automatically
dispenses liquid detergent at the optimum time in the cycle.
Dispenser 2
This dispenser holds 16.9 oz (500 mL) of liquid fabric
softener. It automatically dispenses liquid fabric softener
at the optimum time in the cycle. This dispenser may
instead be used as a second liquid HE detergent dispenser.
See Step 11 on page 13 for information.
IMPORTANT: Do not use chlorine bleach in this washer/dryer,
and do not use powdered detergent in the Load & Go
bulk
dispenser. Powdered detergent must be added to the drum prior
to adding laundry. See “Using the All-In-One Washer/Dryer.
A
B
B
A
Load & Go
Bulk Dispenser
The Load & Go
bulk dispenser holds up to 33.8 oz. (1000 mL)
of liquid HE detergent (Dispenser 1) and 16.9 oz. (500 mL) of
liquid fabric softener or liquid HE detergent (Dispenser 2), enough
for multiple loads of laundry. It adds the appropriate quantity of
HE detergent and liquid fabric softener to the wash load at the
proper time. See “Using the Load & Go
Bulk Dispenser” for
information on using the dispenser.
6
Cycle Guides
You can use this washer/dryer to wash only, dry only, or wash and dry. This washer/dryer has a unique user interface to help you
select the best wash cycle for your load. The “What to Wash/How to Wash” layout guides you to the optimal cycle in two easy steps:
First determine what items are in the load that you are trying to wash. Use that to guide your “What to Wash” selection. Then determine
how you want the washer to wash them and select the appropriate “How to Wash” selection. Selecting “What to Wash” will
automatically select a default “How to Wash selection,” so selecting a “How to Wash” is optional. See chart below for more details.
Settings and options shown in bold are default settings for that wash cycle. For best fabric care, choose the cycle, options, and
settings that best t the load being washed. Always read and follow fabric care labels and laundry product instructions. Avoid tightly
packing the washer/dryer. The washer/dryer will not rinse well or spin correctly if tightly packed. Loading the drum half full or less will
improve washing and drying performance and cycle time. Not all settings are available with each cycle, and some options cannot be
used together.
What Items Do You Want to Wash?
“What to Wash”
Cycle Selection:
Cottons, linens, and mixed garment loads Regular
Bright or darkly colored cottons, linens, and mixed loads Colors
No-iron fabrics, dress shirts/pants, synthetics, sheer/lacy garments Delicates
White fabrics/garments Whites
Sturdy towels and washcloths Towels
Large items such as small comforters, sleeping bags, jackets, and washable rugs Bulky Items
How Do You Want to Wash Them?
“How to Wash”
Cycle Selection:
Regular/normal Normal
Fast Quick
Gentle cleaning with cold water Cold Wash
Powerful cleaning Heavy Duty
Kill 99% of three common household bacteria Sanitize
What
How
Basic Settings Additional Options
Temperature Spin Speed Dry Mode Set Soil Level Rinses Pre-Soak
Tumble Fresh
Wrinkle Shield
Regular Normal Extra Hot
Hot
Warm
Cool
Cold
Extra Fast
Fast
Medium
Auto
Timed
Light
Normal
Heavy
2
3
4
5
X X X
Quick Extra Hot
Hot
Warm
Cool
Cold
Extra Fast
Fast
Medium
Slow
Off
Auto
Timed
Light
Normal
Heavy
2
3
X X X
Cold Wash Cool
Cold
Extra Fast
Fast
Medium
Slow
Off
Auto
Timed
Light
Normal
Heavy
2
3
4
5
X X X
Heavy Duty Extra Hot
Hot
Warm
Cool
Cold
Extra Fast
Fast
Medium
Slow
Off
Auto
Timed
Light
Normal
Heavy
2
3
4
5
X X X
Sanitize Extra Hot Extra Fast
Fast
Medium
Auto
Timed
Light
Normal
Heavy
2
3
4
5
X X
7
What
How
Basic Settings Additional Options
Temperature Spin Speed Dry Mode Set Soil Level Rinses Pre-Soak
Tumble Fresh
Wrinkle Shield
Colors Normal Warm
Cool
Cold
Extra Fast
Fast
Medium
Slow
Off
Auto
Timed
Light
Normal
Heavy
2
3
4
5
X X X
Quick Warm
Cool
Cold
Extra Fast
Fast
Medium
Slow
Off
Auto
Timed
Light
Normal
Heavy
2
3
X X X
Cold Wash Cool
Cold
Extra Fast
Fast
Medium
Slow
Off
Auto
Timed
Light
Normal
Heavy
2
3
4
5
X X X
Delicates Normal Warm
Cool
Cold
Medium
Slow
Off
Auto
Timed
Light
Normal
Heavy
2
3
4
5
X X X
Quick Warm
Cool
Cold
Medium
Slow
Off
Auto
Timed
Light
Normal
Heavy
2
3
X X X
Cold Wash Cool
Cold
Medium
Slow
Off
Auto
Timed
Light
Normal
Heavy
2
3
4
5
X X X
Whites Normal Extra Hot
Hot
Warm
Cool
Cold
Extra Fast
Fast
Medium
Slow
Off
Auto
Timed
Light
Normal
Heavy
2
3
4
5
X X X
Quick Extra Hot
Hot
Warm
Cool
Cold
Extra Fast
Fast
Medium
Slow
Off
Auto
Timed
Light
Normal
Heavy
2
3
X X X
Heavy Duty Extra Hot
Hot
Warm
Cool
Cold
Extra Fast
Fast
Medium
Slow
Off
Auto
Timed
Light
Normal
Heavy
2
3
4
5
X X X
Sanitize Extra Hot Extra Fast
Fast
Medium
Auto
Timed
Light
Normal
Heavy
2
3
4
5
X X
Towels Normal Extra Hot
Hot
Warm
Cool
Cold
Extra Fast
Fast
Medium
Slow
Off
Auto
Timed
Light
Normal
Heavy
2
3
4
5
X X X
Quick Extra Hot
Hot
Warm
Cool
Cold
Extra Fast
Fast
Medium
Slow
Off
Auto
Timed
Light
Normal
Heavy
2
3
X X X
Heavy Duty Extra Hot
Hot
Warm
Cool
Cold
Extra Fast
Fast
Medium
Slow
Off
Auto
Timed
Light
Normal
Heavy
2
3
4
5
X X X
Sanitize Extra Hot Extra Fast
Fast
Medium
Auto
Timed
Light
Normal
Heavy
2
3
4
5
X X
8
What
How
Basic Settings Additional Options
Temperature Spin Speed Dry Mode Set Soil Level Rinses Pre-Soak
Tumble Fresh
Wrinkle Shield
Bulky Items Normal Extra Hot
Hot
Warm
Cool
Cold
Medium
Slow
Off
Auto
Timed
Light
Normal
Heavy
2
3
4
5
X X X
Quick Extra Hot
Hot
Warm
Cool
Cold
Medium
Slow
Off
Auto
Timed
Light
Normal
Heavy
2
3
X X X
Heavy Duty Extra Hot
Hot
Warm
Cool
Cold
Medium
Slow
Off
Auto
Timed
Light
Normal
Heavy
2
3
4
5
X X X
Government energy certications for this model were based on the REGULAR (WHAT TO WASH), NORMAL (HOW TO WASH),
DRYING MODE – AUTO DRYING OFF, TIMED DRYING 4 HOURS, DRYING ONLY ON CYCLE WITH THE MAXIMUM DRYING
TEMPERATURE SETTING. The as-shipped defaults of REGULAR (WHAT TO WASH), NORMAL (HOW TO WASH), WARM TEMP,
SPIN SPEED EXTRA FAST, DRYING MODE – AUTO DRYING OFF, TIMED DRYING OFF, DRYING ONLY OFF were not used.
9
Using the Load & Go
Bulk Dispenser
Follow the steps below to ll the Load & Go
bulk dispenser
when using the washer for the rst time, or when the low detergent
icon or low fabric softener icon on the display indicate that
the detergent or fabric softener level is running low.
1. Open the bulk container lid on the top of the washer/dryer.
2. Lift the ll door on the
Liquid Detergent dispenser
(Dispenser 1). Add liquid HE
detergent up to the “MAX”
line. Do not overll. Close the
ll door. It will click into place.
NOTE: If Dispenser 1 is empty,
you may choose to add only
enough liquid HE detergent
for one load.
3. Lift the ll door on the Liquid
Fabric Softener dispenser
(Dispenser 2). Add liquid fabric
softener up to the “MAX” line.
Do not overll. Close the ll
door. It will click into place.
NOTE: If Dispenser 2 is empty,
you may choose to add only
enough liquid fabric softener
for one load.
4. Slowly close the bulk
container lid. Make sure
it is completely closed.
5. Make sure that the bulk
dispenser is active. Use
the Tools button to make sure that
both Dispenser 1 and Dispenser 2
are active and that the detergent
concentration is correct. See
Step 11 on page 13.
NOTES:
n Dispenser 2 may be used as a second Liquid HE Detergent
dispenser. Use the Tools button (go to “Load & Go
Dispenser
2”) to change the content in Dispenser 2 and set the detergent
concentration. Make sure that the other dispenser is disabled.
n The entire Load & Go
bulk container can be easily removed
for ease of cleaning.
n Thoroughly clean the Liquid Detergent dispenser (Dispenser 1)
before switching to a different brand of detergent.
n Thoroughly clean the Liquid Fabric Softener dispenser
(Dispenser 2) before switching from liquid fabric softener
to liquid detergent, before switching back from liquid
detergent to liquid fabric softener, or before switching
to a different brand of detergent.
IMPORTANT:
n Do not use chlorine bleach in this
washer/dryer. Chlorine bleach will
damage it.
n Do not add a single-dose laundry packet to the bulk dispenser.
n Do not use powdered HE detergent in the bulk dispenser.
Choosing the Right Detergent
Use only High Efciency detergents. The package will be marked
“HE” or “High Efciency.” Low-water washing creates excessive
sudsing with a non-HE detergent. Using non-HE detergent
will likely result in longer cycle times and reduced rinsing
performance. It may also result in component malfunction and,
over time, buildup of mold or mildew. HE detergents should be
low-sudsing and quick-dispersing to produce the right amount
of suds for the best performance. They should hold soil in
suspension so it is not redeposited onto clean clothes. Not all
detergents labeled as High Efciency are identical in formulation
and their ability to reduce suds. For example, natural, organic,
or homemade HE detergents may generate a high level of suds.
Always follow the detergent manufacturer’s instructions to
determine the amount of detergent to use.
Use only High Efciency
(HE) detergent.
About Detergent Concentration
Today’s liquid HE detergents are concentrated. Most brands of
concentrated HE detergent will show the level of concentration
on the bottle.
However, if the detergent bottle does not give the concentration,
it can be easily calculated. Just divide the package size in uid
ounces by the number of loads. Then refer to the chart below
to nd the concentration.
Set the concentration level setting on the washer by using
the Tools button (see Step 11 on page 13). If you do not get
your desired cleaning results, set the concentration level to a
lower concentration number. If you have excess suds, set the
concentration level to a higher concentration number.
Concentration Number of ounces ÷ number of loads
2X 1.5–2.49 (44.4 ml–73.6 ml)
3X 0.9–1.49 (26.6 ml–44.1 ml)
4X 0.7–0.89 (20.7 ml–26.3 ml)
5X 0.5–0.69 (14.8 ml–20.4 ml)
6X 0.3–0.49 (8.9 ml–14.5 ml)
Use only High Efciency
(HE) detergent.
Chlorine
Bleach
10
Powdered HE detergent, single-dose laundry packets, Oxi-type
boosters, or scented crystals can be added to the drum prior to
adding laundry. Make sure that the Load & Go
bulk dispenser
is disabled or off (see Step 11 on page 13), and skip Step 4 when
using powdered HE detergent or single-dose laundry packets.
NOTES:
n Always follow manufacturer’s instructions.
n Do not use chlorine bleach.
Using the All-In-One Washer/Dryer
Sort items by recommended cycle, water temperature,
and colorfastness. Separate heavily soiled items from lightly
soiled. Separate delicate items from sturdy fabrics. Treat
stains promptly and check for colorfastness by testing stain
remover products on an inside seam.
IMPORTANT:
n Empty pockets. Loose change, buttons, or any small
object can plug pumps and may require a service call.
n Close zippers, fasten hooks, tie strings and sashes,
and remove non-washable trim and ornaments.
n Mend rips and tears to avoid further damage to items
during washing.
n Turn knits inside out to prevent pilling. Separate lint-takers
from lint-givers. Synthetics, knits, and corduroy fabrics will
pick up lint from towels, rugs, and chenille fabrics.
n Do not dry garments if stains remain after washing,
because heat can set stains into fabric.
n Always read and follow fabric care labels and laundry
product instructions. Improper usage may cause damage
to your garments.
1. Sort and prepare your laundry
First wash cycle without laundry
Before washing clothes for the rst time, set up the Load & Go
bulk dispenser (see page 9). Choose the Regular (What to Wash)
and Quick (How to Wash) cycle and run it without clothes. Use
only HE detergent. This initial cycle serves to ensure the interior
is clean and the bulk dispenser is primed and ready for use
before washing clothes.
If using liquid HE detergent in both Dispenser 1 and Dispenser 2,
you will need to run a second cycle without laundry as indicated
above to prime Dispenser 2 and clean the interior. Using the
Tools button, make sure that Dispenser 1 is disabled when
priming Dispenser 2 for detergent.
2. If desired, instead of liquid detergent,
add powdered HE detergent and/or
laundry products
Place a load of sorted items loosely in the washer/dryer.
Items need to move freely for best cleaning and to reduce
wrinkling and tangling. If using the drying option, loading
the drum half full or less and not interrupting the drying cycle
by opening the door will improve drying performance and
cycle time. Close the washer/dryer door by pushing it rmly
until the latch clicks.
n Mix large and small items and avoid washing single items.
Load evenly.
n Wash small items in mesh garment bags. For multiple
items, use more than one bag and ll bags equally.
3. Load laundry into washer/dryer
11
4. Add liquid HE detergent to Load & Go
bulk dispenser (if bulk dispenser is
not already loaded or if low detergent
icon on display is lit), if desired
See page 9 for instructions on how to ll the liquid detergent
bulk dispenser (Dispenser 1). Press the TOOLS button and make
sure that the bulk dispenser is active. See Step 11 on page 13.
NOTE: Do not add powdered HE detergent, single-dose
laundry packets, Oxi-type boosters, or scented crystals
to the bulk dispenser. They will not dispense correctly.
See page 9 for instructions on how to ll the fabric softener
bulk dispenser (Dispenser 2). Press the TOOLS button and
make sure that the bulk dispenser is active. See Step 11
on page 13.
IMPORTANT:
n
Do not overll or dilute fabric softener.
n
Do not spill or drip any fabric softener onto the clothes.
n
Do not use scented crystals in the bulk dispenser.
They will not dispense correctly.
n
Do not mix fabric softener and detergent in Dispenser 2
at the same time.
5. Add liquid fabric softener to Load & Go
bulk dispenser (if bulk dispenser is not
already loaded or if low fabric softener
icon on display is lit), if desired
6. Touch POWER button
to turn on washer/dryer
7. Select wash program/cycle
From the home screen, touch the “What to Wash” area of the
screen to select the program that best matches the items you
want to wash. You may need to scroll down with your nger to
see all of the selections. Touch the desired program to return
to the home screen.
Touch the “How to Wash” area of the screen to select the
program that best matches the method that you would like
to wash those items. You may need to scroll down with your
nger to see all of the selections. Touch the desired program
to return to the home screen.
Touch until the indicators turn on.
Temperature
WARM
Spin Speed
EXTRA FAST
Auto Dry
Dry
What to Wash
REGULAR
How to Wash
NORMAL
4:28
3:15
12
Not all options and settings are available with all programs/cycles.
See “Cycle Guides” for available options and settings.
8. Select temperature and spin speed
From the home screen, touch the “Temperature” area of
the screen to show the Temperature settings available for
the cycle/program chosen in Step 7. Touch the desired
setting and touch OKAY to conrm that setting.
The recommended wash temperature is preset for each cycle.
Some preset temperatures can be changed. You may select
a different wash temperature based on the level of soil and
type of fabric being washed. For best results, use the warmest
wash water safe for your fabric, following the garment label
instructions. All wash temperatures feature a cold rinse.
Touch the “Spin Speed” area of the screen to show the
Spin Speed settings available for the cycle/program chosen
in Step 7. Touch the desired setting and touch OKAY to
conrm that setting.
The recommended spin speed is preset for each cycle.
Some preset speeds can be changed.
n Faster spin speeds mean shorter dry times, but may
increase wrinkling in your load.
n Slower spin speeds reduce wrinkling, but will leave
your load more damp.
Temperature
WARM
Spin Speed
EXTRA FAST
Auto Dry
Dry
What to Wash
REGULAR
How to Wash
NORMAL
4:28
3:15
9. Select drying function, if desired
From the home screen, touch the “Drying Mode” area of
the screen to show the available Drying Mode settings.
From the Drying Mode screen, choose between Auto-Drying
and Timed-Drying. For Auto-Drying, touch Auto-Drying and
then touch the screen to choose between Damp Dry, Dry, and
Extra Dry. For Timed-Drying, touch Timed-Drying and then
touch the screen to choose between :30 HR, 1:00 HR, 1:30
HR, 2:00 HR, 3:00 HR, and 4:00 HR. Expect longer drying
times than with traditional vented dryers.
To run a dry cycle only:
Load the drum half full or less for optimal drying performance
and cycle time. From the home screen, touch the “Drying
Mode” area of the screen to show the available Drying Mode
settings, and from the Drying Mode screen, after making the
Auto-Drying or Timed-Drying choices as mentioned above,
touch “DRYING ONLY ON.” Do not open the door during the
drying cycle.
NOTE: If items to dry are highly saturated, run a high speed
Spin cycle prior to running the Dry cycle.
IMPORTANT:
n Do not use dryer sheets.
n Do not dry comforters or large blankets.
Temperature
WARM
Spin Speed
EXTRA FAST
Auto Dry
Dry
What to Wash
REGULAR
How to Wash
NORMAL
4:28
3:15
Drying Function (Step 9)
13
10. Select options, if desired
From the home screen, touch the Options icon (at upper
right of screen) and the Options screen will show Soil Level,
Extra Rinses, Pre-Soak, Tumble Fresh,
and Wrinkle Shield
selections. Previously selected “What to Wash” and “How
to Wash” options will be shown on the screen. Touch the
screen for each option to change its setting.
Soil Level Option
The Soil Level option allows you to select a Light, Normal, or
Heavy soil level setting. The recommended soil level is preset
for each cycle. Some preset soil levels can be changed. For
heavily soiled and sturdy fabrics, select the Heavy soil level
setting. For lightly soiled and delicate fabrics, select the Light
soil level setting. Lower soil level settings will help reduce
tangling and wrinkling.
Extra Rinses Option
The Extra Rinses option provides one or more additional rinses
to the selected cycle. The extra rinses can be canceled at any
time by touching the “X” on the touch screen to the right of
the estimated time remaining.
Pre-Soak Option
The Pre-Soak option can be set either on or off. Pre-Soak may
be ended at any time by touching the “X” on the touch screen
to the right of the estimated time remaining.
Tumble Fresh
Option
The Tumble Fresh
option will periodically tumble the load
after the end of the cycle for up to 12 hours. Touch TUMBLE
FRESH to activate this option. This option is not available
when a drying mode is selected. Tumble Fresh
may be
ended at any time by touching the “X” on the touch screen
to the right of the estimated time remaining.
Wrinkle Shield
Option
The Wrinkle Shield
option is only available when a drying
mode is selected, and will periodically tumble the load after
the end of the cycle for up to 12 hours. Wrinkle Shield
may
be ended at any time by touching the “X” on the touch screen
to the right of the estimated time remaining.
Not all options and settings are available with all programs/cycles.
See “Cycle Guides” for available options and settings.
11. Use Tools button to change
other settings, if desired
The Tools button gives access to many other settings, utility
cycles, preferences, and information. Touch the TOOLS button
to access the Tools screen, which contains the following
(you will need to scroll down with your nger to access
all of the selections).
Load & Go
Dispenser 1
Press this icon to access:
Load & Go
Status Dispenser 1 and choose between:
n
Active
n
Disabled (1 Cycle)
n
Off (Permanently)
Detergent Concentration Dispenser 1 and choose between:
n
2X
n
4X
n
6X
n
8X
Load & Go
Dispenser 2
Press this icon to access:
Load & Go
Status Dispenser 2 and choose between:
n
Active
n
Disabled (1 Cycle)
n
Off (Permanently)
Load & Go
Content Dispenser 2 and choose between:
n
Softener
n
Detergent
Once set at Detergent:
Set Concentration Dispenser 2 and choose between:
n
2X
n
4X
n
6X
n
8X
Control Lock
Press this icon to lock the controls. Swipe up to unlock.
Mute
Press this icon to mute or unmute sounds.
Utility Cycles
Press this icon to access the following utility cycles: Spin, Drain,
Rinse & Spin, and Clean Washer with affresh
®
cycle. Touch the
utility cycle you wish to use and follow the screen prompts.
Preferences
Press to access Times and Dates, Sound Volume, Display
Settings, and Regional. Follow the screen prompts.
WiFi
Press to access Connect to Network, SAID (Smart
Appliance ID) Codes, Mac Address, and WiFi. Follow the
screen prompts.
Info
Press to access Service & Support, Store Demo Mode,
Restore Factory, WiFi Terms and Conditions, and Software
Terms and Conditions. Follow the screen prompts.
14
12. Touch START/PAUSE button
to begin cycle
Touch the START/PAUSE button to start the cycle.
To pause a cycle in progress, touch the START/PAUSE button
once, then touch again to continue the cycle. To cancel a
cycle, touch the “X” on the touch screen to the right of the
estimated time remaining.
Once you touch the START/PAUSE button, you will hear
the door lock. The washer/dryer door will remain locked
during a wash cycle.
14. Remove garments promptly
after cycle is nished
After a wash-only cycle, promptly remove
garments after cycle has completed to
avoid odor and rusting of metal objects on
garments. When unloading garments, pull
back the door seal and check for small items between the tub
and the washer/dryer drum.
If you will be unable to remove the load promptly after a wash-
only cycle, use the Tumble Fresh
option (see Step 10, page 13).
After a wash and dry cycle or a dry-only cycle, promptly
remove garments after cycle has completed to reduce wrinkling.
If you will be unable to remove a load promptly, use the Wrinkle
Shield
option (see Step 10, page 13).
NOTES:
n
The door will remain locked while the Tumble Fresh
option
is active after a wash-only cycle. To cancel the Tumble Fresh
option and unlock the door, touch the “X” on the touch
screen to the right of the estimated time remaining.
n
This washer/dryer has a tight seal to avoid water leaks.
To avoid odors, leave the door open to allow the washer/dryer
to dry between uses.
n
If a dry cycle is interrupted and the load removed before
the cool-down period at the end of the cycle, the load will
be very hot.
13. Touch POWER button to turn off
washer/dryer after cycle ends
Setting a delayed start
Touch POWER until the indicators turn on. From the home
screen, make sure the washer/dryer is set to the correct time
and date (if it is not, see Step 11 on page 13 for instructions
on how to set the time and date).
Touch the clock icon on the far right portion of the touch
screen. The “Select a start time” screen will show on the
display. Scroll horizontally to select a preferred start time for
your wash or dry cycle. The times will display in 15-minute
increments. Press OKAY to set the start time. The display will
return to the home screen and the clock icon will turn brown.
To delete or modify the delayed start, press the clock icon
again and follow the screen prompts.
Temperature
WARM
Spin Speed
EXTRA FAST
Auto Dry
Dry
What to Wash
REGULAR
How to Wash
NORMAL
4:28
3:15
Touch the POWER button to turn off the washer/dryer at the
end of a cycle. The Power button is also used to turn on the
washer/dryer before use.
15
All-In-One Washer/Dryer Maintenance
WASHER/DRYER CARE
Recommendations to Help Keep Your Washer/Dryer
Clean and Performing at its Best
1. Always use High Efciency (HE) detergents and follow the
HE detergent manufacturer’s instructions regarding the
amount of HE detergent to use. Never use more than the
recommended amount because that may increase the
rate at which detergent and soil residue accumulate inside
your washer, which in turn may result in undesirable odor.
2. Use warm or hot water washes sometimes (not exclusively
cold water washes), because they do a better job of
controlling the rate at which soils and detergent accumulate.
3. Always leave the washer/dryer door slightly ajar
between uses to help dry out the washer/dryer and
avoid the buildup of odor-causing residue.
4. Periodically clean residue from all interior surfaces of the
glass window. For better care, wipe the entire inside of the
glass door with a damp cloth.
Cleaning Your Front-Loading Washer/Dryer
Read these instructions completely before beginning the
routine cleaning processes recommended below. This Washer
Maintenance Procedure should be performed, at a minimum,
once per month or every 30 wash cycles, whichever occurs
sooner, to control the rate at which soils and detergent may
otherwise accumulate in your washer/dryer.
Cleaning the Door Seal
1. Open the washer/dryer door and remove any clothing
or items from the washer/dryer.
2. Inspect the seal between the door opening and the drum
for stained areas or soil buildup. Pull back the seal to
inspect all areas under the seal and to check for foreign
objects.
3. If stained areas or soil buildup are found, wipe down
these areas of the seal using the following procedure:
When the cycle is complete, gently pull back the rubber
door seal and clean the entire surface with the textured
side of an affresh
®
Machine Cleaning Wipe.
WASHER/DRYER CARE (cont.)
Cleaning the Inside of the Washer/Dryer
This washer/dryer has a special cycle that uses higher
water volumes in combination with affresh
®
Washer Cleaner
to thoroughly clean the inside of the washer/dryer.
NOTE: Read these instructions completely before beginning
the cleaning process.
Begin procedure
Clean Washer with affresh
®
Cycle Procedure
(Recommended for Best Performance):
a. Open the washer/dryer door and remove any clothing
or items.
b. Use an affresh
®
Machine Cleaning Wipe or a soft,
damp cloth or sponge to clean the inside door glass.
c. Add an affresh
®
Washer Cleaner tablet to the
washer drum.
d. Do not add the affresh
®
Washer Cleaner tablet
to the bulk dispenser.
e. Do not add any detergent or other chemical to the
washer/dryer when following this procedure.
f. Close the washer/dryer door.
g. Select the Clean Washer with affresh
®
cycle.
h. Select the Tumble Fresh
option to help dry the
washer/dryer interior after the cycle is complete.
NOTE: The washer/dryer remembers your last option
selection and will use it for future wash cycles until
you deselect that option.
i. Touch the START/PAUSE button to begin the cycle.
The Clean Washer with affresh
®
cycle operation is
described below.
Description of Clean Washer with affresh
®
Cycle Operation:
1. Do not run this cycle with a load. Doing so could damage
the items.
2. After the cycle is complete, leave the door open slightly
to allow for better ventilation and drying of the washer/
dryer interior.
Cleaning the Load & Go
Bulk Dispenser
After a period of using your washer/dryer, you may nd
some residue buildup in the Load & Go
bulk dispenser. To
remove residue from the dispensers, lift the handle on the
dispenser container housing to remove it from the washer/
dryer cabinet, then rinse the two dispensers thoroughly with
running water. Wipe the outside dispenser container surfaces
with an affresh
®
Machine Cleaning Wipe or a damp cloth
and towel dry. Use an all-purpose surface cleaner, if needed.
Replace the dispenser container in the washer/dryer cabinet
and make sure that it is seated.
IMPORTANT: Load & Go
bulk dispenser container is not
dishwasher-safe.
Cleaning the Outside of the Washer/Dryer
Use an affresh
®
Machine Cleaning Wipe or a soft, damp
cloth or sponge to wipe up any spills. Occasionally wipe the
outside of your washer/dryer to help keep it looking new. Use
an affresh
®
Machine Cleaning Wipe or mild soap and water.
IMPORTANT: To avoid damaging the washer/dryer nish,
do not use abrasive products.
CLEANING THE WASHER/DRYER LOCATION
Keep washer/dryer area clear and free from items that would
block the airow for proper dryer operation. This includes
clearing piles of laundry in front of the washer/dryer.
16
Replace inlet hose after 5 years of use to reduce the risk
of hose failure. Periodically inspect and replace inlet hose
if bulges, kinks, cuts, wear, or leaks are found.
When replacing your inlet hose:
n Mark the date of replacement on the label with a
permanent marker.
n Check that the old washer is not stuck on the washer
inlet valve.
n Use a new washer in the new inlet hose to ensure a
proper seal.
WATER INLET HOSE
REMOVING THE LOAD & GO
BULK CONTAINER
To remove:
1. Lift the bulk container lid on the top of the washer/dryer.
2. Lift up on the bulk container handle and pull straight up
and out of the washer/dryer.
To replace:
1. Place the bulk container back into the bulk container
cavity on the top of the washer/dryer and make sure
that it is seated.
2. Close the bulk container lid.
If moving, or not using your washer/dryer for a period
of time, follow these steps:
1. Unplug or disconnect power to washer/dryer.
2. Turn off water supply to washer/dryer to avoid ooding
due to water pressure surges.
HELPFUL TIP: Attach a reminder note to the washer/
dryer to turn the water back on before washer’s next use.
3. Clean the bulk dispenser. See “Cleaning the Load & Go
Bulk Dispenser.
NON-USE AND VACATION CARE
WINTER STORAGE CARE
IMPORTANT: To avoid damage, install and store washer/
dryer where it will not freeze. Because some water may stay
in hoses, freezing can damage washer/dryer. If storing or
moving during freezing weather, winterize your washer/dryer.
To winterize washer/dryer:
1. Shut off water faucet, disconnect and drain water
inlet hose.
HELPFUL TIP: Attach a reminder note to the washer/
dryer to turn the water back on before washer’s next use.
2. Remove drain pump lter.
3. Put 1 qt. (1 L) of R.V.-type antifreeze in drum and run
washer on Normal cycle for about 2 minutes to mix
antifreeze and remaining water.
4. Unplug washer/dryer or disconnect power.
The Clean Washer with affresh
®
message will ash at the end
of a wash cycle when the washer has run 30 wash cycles. This
is a reminder to run the Clean Washer with affresh
®
cycle.
If the Clean Washer with affresh
®
cycle is not run, the message
will stop ashing at the end of a wash cycle after running three
more regular wash cycles. After 30 more wash cycles are
completed, the Clean Washer with affresh
®
message will again
ash at the end of a wash cycle as a reminder.
CLEAN WASHER CYCLE REMINDER
17
3. Lay a cotton cloth beneath the drain pump lter to absorb
any water still in it. Then remove the drain pump lter by
turning it counterclockwise.
4. Remove large clumps of lint by hand from the lter and
place lint in a suitable waste container. Remove remaining
residue from the lter by rinsing with water.
5. Reinsert the drain pump lter by turning it clockwise.
Make sure to turn it in as far as it will go, with the lter
handle left in a vertical position.
CLEANING THE DRAIN PUMP FILTER/
DRAINING RESIDUAL WATER (cont.)
CLEANING THE DRAIN PUMP FILTER/
DRAINING RESIDUAL WATER
1. Open the drain pump lter access door at the bottom right
corner at the front of the washer/dryer.
2. Place a broad, at pan beneath the drain pump lter to
collect the drain water. Pull out the black hose, remove
the plug, and drain the hose into the pan. Empty the pan.
Replace the drain hose plug and put the hose back into
place. Repeat this procedure if necessary until all the
water has drained. Make sure that the black hose is
completely dry.
NOTE: Perform the following procedure every 6 months.
Black hose
18
REINSTALLING/USING
WASHER/DRYER AGAIN
To reinstall washer/dryer after non-use, vacation, winter
storage, or moving:
1.
Refer to “Installation Instructions” to locate, level, and
connect washer/dryer.
2.
Before using again, run washer/dryer through the
following recommended procedure:
To use washer/dryer again:
1.
Flush water pipes and hose. Reconnect water inlet
hose. Turn on water faucet.
2.
Plug in washer/dryer or reconnect power.
3.
Run washer/dryer through Heavy Duty wash cycle
to clean washer/dryer and remove antifreeze, if used.
Use only HE detergent. Use half the manufacturer’s
recommended amount for a medium-size load.
TRANSPORTING YOUR WASHER/DRYER
1. Shut off water faucet. Disconnect and drain water inlet
hose.
2. If washer/dryer will be moved during freezing weather,
follow “Winter Storage Care” directions before moving.
3. Disconnect drain hose from drain system and from back
of washer/dryer.
4. Unplug power cord.
5. Place inlet hose and drain hose inside drum.
6. Bundle power cord with a rubber band or cable tie
to keep it from hanging onto the ground.
IMPORTANT: Call for service to install new transport
bolts. Do not reuse transport bolts. Washer/dryer must
be transported in the upright position. To avoid structural
damage to your washer/dryer, it must be properly set up
for relocation by a certied technician.
19
Alternate parts:
(Not supplied with washer/dryer)
Your installation may require additional parts. To order, please
refer to toll-free numbers on the back page of this manual.
Available accessory:
n An optional matching pedestal is available to raise your
washer/dryer to a more comfortable working height.
To order, see the “Accessories” section on page 4, call the
dealer from whom you purchased your washer/dryer, or refer
to the “Assistance or Service” section.
Optional tools:
Parts supplied:
NOTE: All parts supplied for installation are in the washer/
dryer drum. Inlet hoses and washers are not included.
Adjustable or open-end
wrenches 3/8" (10 mm)
and 1/2" (13 mm)
Ruler or measuring tape
Level
Pliers that open to 1
9
16
"
(39.5 mm)
Flashlight Bucket
Cable tie U-shaped hose form
Tools needed:
Installation Requirements
Tools and Parts
Gather required tools and parts before starting installation.
INSTALLATION INSTRUCTIONS
3/8" (10 mm) socket
wrench
20
Location Requirements
Proper installation is your responsibility. Check code
requirements. Some codes limit, or do not permit, installing
washer/dryer in garages, closets, mobile homes, or sleeping
quarters. Contact your local building inspector.
You will need:
n A separate 30 amp circuit.
n A grounded electrical outlet located within 2 ft. (610 mm)
of either side of washer/dryer. See “Electrical Requirements.”
n Water faucet located within 4 ft (1.2 m) of water ll valve
on washer/dryer, and water pressure of 20–100 psi
(137.9–689.6 kPa).
n A level oor with maximum slope of 1" (25 mm) under entire
washer/dryer. Installing on carpet or surfaces with foam
backing is not recommended.
n Floor must support washer/dryer’s total weight (with water
and load) of 400 lbs (180 kgs).
n For garage installation, place washer/dryer at least 18"
(460 mm) above oor. If using a pedestal, you will need 18"
(460 mm) to bottom of washer/dryer.
IMPORTANT: Do not install, store, or operate washer/dryer where
it will be exposed to weather or in temperatures below 32°F (0°C).
Water remaining in washer/dryer after use may cause damage in
low temperatures. See “All-In-One Washer/Dryer Maintenance”
for winterizing information.
All dimensions show recommended spacing allowed, except for
closet door ventilation openings which are the minimum required.
For each arrangement, consider allowing more space for ease of
installation and servicing, and spacing for companion appliances
and clearances for walls, doors, and oor moldings.
Space must be large enough to allow door to fully open.
Add spacing of 1" (25 mm) on all sides of washer/dryer to
reduce noise transfer. If a closet door or louvered door is
installed, top and bottom air openings in door are required.
48
15
/16"
(1243 mm)
28"
(675 mm)
33
1
/4" Min.
(845 mm)
33
3
/4" Max.
(857 mm)
24"
(610 mm)
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92

Whirlpool WFC8090GX Manuel utilisateur

Catégorie
Machines à laver
Taper
Manuel utilisateur

dans d''autres langues