Midas MR12 Guide de démarrage rapide

MR12
Midas
Marque
Midas
Modèle
MR12
Catégorie
Contrôleurs DJ
Taper
Guide de démarrage rapide
MR12
12-Input Digital Mixer for iPad/Android Tablets with
4 MIDAS PRO Preamps, 8 Line Inputs,
Integrated Wi Module and USB Stereo Recorder
A54-00000-00000
2 3Quick Start GuideMR12
LEGAL DISCLAIMER
LIMITED WARRANTY
Important Safety
Instructions
Terminals marked with
this symbol carry
electrical current of
su cient magnitude to constitute risk
of electric shock. Use only high-quality
professional speaker cables with ¼" TS
or twist-locking plugs pre-installed.
Allother installation or modi cation
should be performed only by
quali edpersonnel.
This symbol, wherever it
appears, alerts you to the
presence of uninsulated
dangerous voltage inside the enclosure
- voltage that may be su cient to
constitute a risk ofshock.
This symbol, wherever it
appears, alerts you to
important operating and
maintenance instructions in the
accompanying literature. Please read
themanual.
Caution
To reduce the risk of
electric shock, do not
remove the top cover (or the rear
section). No user serviceable parts inside.
Refer servicing to quali edpersonnel.
Caution
To reduce the risk of
re or electric shock, do
not expose this appliance to rain and
moisture. Theapparatus shall not
be exposed to dripping or splashing
liquids and no objects  lled with
liquids, such as vases, shall be placed
on the apparatus.
Caution
These service instructions
are for use by quali ed
service personnel only. Toreduce
the risk of electric shock do not
perform any servicing other than that
contained in the operation instructions.
Repairshave to be performed by
quali ed servicepersonnel.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus
near water.
6. Clean only with dry cloth.
7. Do not block any ventilation
openings. Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat
sources such as radiators, heat registers,
stoves, or other apparatus (including
ampli ers) that produce heat.
9. Do not defeat the safety purpose
of the polarized or grounding-type
plug. A polarized plug has two blades
with one wider than the other.
A grounding-type plug has two blades
and a third grounding prong. The wide
blade or the third prong are provided
for your safety. Ifthe provided plug
does not  t into your outlet, consult
an electrician for replacement of the
obsolete outlet.
10. Protect the power cord from being
walked on or pinched particularly
at plugs, convenience receptacles,
and the point where they exit from
the apparatus.
11. Use only attachments/accessories
speci ed by themanufacturer.
12. Use only with
the cart, stand,
tripod, bracket, or
table speci ed by
the manufacturer,
orsold with
the apparatus. When a cart is used,
use caution when moving the cart/
apparatus combination to avoid injury
from tip-over.
13. Unplug this apparatus during
lightning storms or when unused for
long periods of time.
14. Refer all servicing to quali ed
service personnel. Servicing is required
when the apparatus has been damaged
in any way, such as power supply cord
or plug is damaged, liquid has been
spilled or objects have fallen into the
apparatus, the apparatus has been
exposed to rain or moisture, does not
operate normally, or has beendropped.
15. The apparatus shall be connected
to a MAINS socket outlet with a
protective earthing connection.
16. Where the MAINS plug or an
appliance coupler is used as the
disconnect device, the disconnect
device shall remain readily operable.
17. Correct disposal of
this product: This
symbol indicates that
this product must not
be disposed of with
household waste, according to the
WEEE Directive (2012/19/EU) and your
national law. This product should be
taken to a collection center licensed for
the recycling of waste electrical and
electronic equipment (EEE).
The mishandling of this type of waste
could have a possible negative impact
on the environment and human health
due to potentially hazardous
substances that are generally
associated with EEE. At the same time,
your cooperation in the correct disposal
of this product will contribute to the
e cient use of natural resources. For
more information about where you can
take your waste equipment for
recycling, please contact your local city
o ce, or your household waste
collection service.
18. Do not install in a con ned space,
such as a book case or similar unit.
19. Do not place naked  ame
sources, such as lighted candles,
on the apparatus.
20. Please keep the environmental
aspects of battery disposal in mind.
Batteries must be disposed-of at a
battery collection point.
21. Use this apparatus in tropical
and/or moderate climates.
MUSIC Group accepts no liability for
any loss which may be su ered by
any person who relies either wholly
or in part upon any description,
photograph, or statement contained
herein. Technical speci cations,
appearances and other information
are subject to change without notice.
All trademarks are the property of
their respective owners. MIDAS,
KLARK TEKNIK, LAB GRUPPEN,
LAKE, TANNOY, TURBOSOUND,
TC ELECTRONIC, TC HELICON,
BEHRINGER, BUGERA and DDA are
trademarks or registered trademarks of
MUSIC Group IP Ltd. © MUSIC Group IP
Ltd. 2016 All rights reserved.
For the applicable warranty terms and
conditions and additional information
regarding MUSIC Group’s Limited
Warranty, please see complete details
online at music-group.com/warranty.
Las terminales marcadas
con este símbolo
transportan corriente
eléctrica de magnitud su ciente como
para constituir un riesgo de descarga
eléctrica. Utilicesolo cables de altavoz
profesionales y de alta calidad con
conectores TS de 6,3 mm o de bayoneta
pre jados. Cualquier otra instalación o
modi cación debe ser realizada
únicamente por un técnicocuali cado.
Este símbolo, siempre que
aparece, leadvierte de la
presencia de voltaje
peligroso sin aislar dentro de la caja;
estevoltaje puede ser su ciente para
constituir un riesgo dedescarga.
Este símbolo, siempre que
aparece, leadvierte sobre
instrucciones operativas y
de mantenimiento que aparecen en la
documentación adjunta. Por favor,
leaelmanual.
Atención
Para reducir el riesgo de
descarga eléctrica, no
quite la tapa (olaparte posterior).
Nohay piezas en el interior del equipo
que puedan ser reparadas por el
usuario. Sies necesario, póngase en
contacto con personal cuali cado.
Atención
Para reducir el riesgo
de incendio o descarga
eléctrica, no exponga este aparato a la
lluvia, humedad o alguna otra fuente
que pueda salpicar o derramar algún
líquido sobre el aparato. Nocoloque
ningún tipo de recipiente para líquidos
sobre elaparato.
Atención
Las instrucciones
de servicio deben
llevarlas a cabo exclusivamente
personal cuali cado. Paraevitar el
riesgo de una descarga eléctrica,
no realice reparaciones que no se
encuentren descritas en el manual de
operaciones. Lasreparaciones deben
ser realizadas exclusivamente por
personalcuali cado.
1. Lea las instrucciones.
2. Conserve estas instrucciones.
3. Preste atención a todas
las advertencias.
4. Siga todas las instrucciones.
5. No use este aparato cerca
del agua.
6. Limpie este aparato con un
paño seco.
7. No bloquee las aberturas
de ventilación. Instale el equipo
de acuerdo con las instrucciones
del fabricante.
8. No instale este equipo cerca de
fuentes de calor tales como radiadores,
acumuladores de calor, estufas u otros
aparatos (incluyendo ampli cadores)
que puedan producir calor.
9. No elimine o deshabilite nunca
la conexión a tierra del aparato o del
cable de alimentación de corriente.
Unenchufe polarizado tiene dos polos,
uno de los cuales tiene un contacto
más ancho que el otro. Una clavija
con puesta a tierra dispone de tres
contactos: dos polos y la puesta a
tierra. El contacto ancho y el tercer
contacto, respectivamente, son los que
garantizan una mayor seguridad. Si el
enchufe suministrado con el equipo
no concuerda con la toma de corriente,
consulte con un electricista para
cambiar la toma de corriente obsoleta.
10. Coloque el cable de suministro de
energía de manera que no pueda ser
pisado y que esté protegido de objetos
a lados. Asegúrese de que el cable de
suministro de energía esté protegido,
especialmente en la zona de la clavija y
en el punto donde sale del aparato.
11. Use únicamente los dispositivos
o accesorios especi cados por
el fabricante.
12. Use
únicamente la
carretilla,
plataforma,
trípode, soporte o
mesa especi cados
por el fabricante o suministrados junto
con el equipo. Altransportar el equipo,
tenga cuidado para evitar daños y
caídas al tropezar con algún obstáculo.
13. Desenchufe el equipo durante
tormentas o si no va a utilizarlo durante
un periodo largo.
14. Confíe las reparaciones
únicamente a servicios técnicos
cuali cados. La unidad requiere
mantenimiento siempre que haya
sufrido algún daño, si el cable de
suministro de energía o el enchufe
presentaran daños, sehubiera
derramado un líquido o hubieran caído
objetos dentro del equipo, si el aparato
hubiera estado expuesto a la humedad
o la lluvia, si ha dejado de funcionar de
manera normal o si ha sufrido algún
golpe o caída.
15. Al conectar la unidad a la toma de
corriente eléctrica asegúrese de que
la conexión disponga de una unión
atierra.
16. Si el enchufe o conector
de red sirve como único medio
de desconexión, éste debe ser
accesiblefácilmente.
Instrucciones de
seguridad
4 5Quick Start GuideMR12
NEGACIÓN LEGAL
GARANTÍA LIMITADA
17. Cómo debe
deshacerse de este
aparato: Este símbolo
indica que este aparato
no debe ser tratado
como basura orgánica, según lo
indicado en la Directiva WEEE (2012/19/
EU) y a las normativas aplicables en su
país. En lugar de ello deberá llevarlo al
punto limpio más cercano para el
reciclaje de sus elementos eléctricos/
electrónicos (EEE). Al hacer esto estará
ayudando a prevenir las posibles
consecuencias negativas para el medio
ambiente y la salud que podrían ser
provocadas por una gestión inadecuada
de este tipo de aparatos. Además,
el reciclaje de materiales ayudará a
conservar los recursos naturales. Para
más información acerca del reciclaje de
este aparato, póngase en contacto con
el Ayuntamiento de su ciudad o con el
punto limpio local.
18. No instale esta unidad en un
espacio muy reducido, tal como
encastrada en una librería o similar.
19. No coloque objetos con
llama, como una vela encendida,
sobre este aparato.
20. Tenga presentes todas las
advertencias relativas al reciclaje
y correcta eliminación de las pilas.
Las pilas deben ser siempre eliminadas
en un punto limpio y nunca con el resto
de la basura orgánica.
21. Use este aparato en rangos de
temperatura moderados y/o tropicales.
MUSIC Group no admite ningún tipo
de responsabilidad por cualquier
daño o pérdida que pudiera sufrir
cualquier persona por con ar total
o parcialmente en la descripciones,
fotografías o a rmaciones
contenidas en este documento.
Las especi caciones técnicas,
imágenes y otras informaciones
contenidas en este documento están
sujetas a modi caciones sin previo
aviso. Todas las marcas comerciales
que aparecen aquí son propiedad
de sus respectivos dueños. MIDAS,
KLARK TEKNIK, LAB GRUPPEN,
LAKE, TANNOY, TURBOSOUND, TC
ELECTRONIC, TC HELICON, BEHRINGER,
BUGERA y DDA son marcas comerciales
o marcas registradas de MUSIC Group
IP Ltd. © MUSIC Group IP Ltd. 2016
Reservados todos los derechos.
Si quiere conocer los detalles y
condiciones aplicables de la garantía
así como información adicional sobre
la Garantía limitada de MUSIC Group,
consulte online toda la información en
la web music-group.com/warranty.
Les points repérés par ce
symbole portent une
tension électrique
su sante pour constituer un risque
d’électrocution. Utilisez uniquement
des câbles d’enceintes professionnels
de haute qualité avec  ches Jack mono
6,35 mm ou  ches à verrouillages déjà
installées. Touteautre installation ou
modi cation doit être e ectuée
uniquement par un personnel quali é.
Ce symbole avertit de la
présence d’une tension
dangereuse et non isolée à
l’intérieur de l’appareil - elle peut
provoquer des chocs électriques.
Attention
Ce symbol signale les
consignes d’utilisation
et d’entre ! Tienimportantes dans
la documentation fournie. Lisez les
consignes de sécurité du manuel
d’utilisation del’appareil.
Attention
Pour éviter tout risque
de choc électrique,
ne pas ouvrir le capot de l’appareil
ni démonter le panneau arrière.
L’intérieur de l’appareil ne possède
aucun élément réparable par
l’utilisateur. Laissertoute réparation à
un professionnelquali é.
Attention
Pour réduire les risques
de feu et de choc
électrique, n’exposez pas cet appareil
à la pluie, à la moisissure, auxgouttes
ou aux éclaboussures. Ne posez pas
de récipient contenant un liquide sur
l’appareil (unvase par exemple).
Attention
Ces consignes de
sécurité et d’entretien
sont destinées à un personnel
quali é. Pour éviter tout risque de
choc électrique, n’e ectuez aucune
réparation sur l’appareil qui ne soit
décrite par le manuel d’utilisation.
Les éventuelles réparations doivent
être e ectuées uniquement par un
technicienspécialisé.
1. Lisez ces consignes.
2. Conservez ces consignes.
3. Respectez tous les avertissements.
4. Respectez toutes les
consignes d’utilisation.
5. N’utilisez jamais l’appareil à
proximité d’un liquide.
6. Nettoyez l’appareil avec un
chi on sec.
7. Veillez à ne pas empêcher la
bonne ventilation de l’appareil via ses
ouïes de ventilation. Respectezles
consignes du fabricant concernant
l’installation del’appareil.
8. Ne placez pas l’appareil à
proximité d’une source de chaleur telle
qu’un chau age, une cuisinière ou tout
appareil dégageant de la chaleur (y
compris un ampli depuissance).
9. Ne supprimez jamais la sécurité
des prises bipolaires ou des prises
terre. Les prises bipolaires possèdent
deux contacts de largeur di érente.
Leplus large est le contact de sécurité.
Les prises terre possèdent deux
contacts plus une mise à la terre
servant de sécurité. Si la prise du bloc
d’alimentation ou du cordon d’ali-
mentation fourni ne correspond pas à
celles de votre installation électrique,
faites appel à un électricien pour
e ectuer le changement de prise.
10. Installez le cordon d’alimentation
de telle façon que personne ne puisse
marcher dessus et qu’il soit protégé
d’arêtes coupantes. Assurez-vous
que le cordon d’alimentation est
suffisamment protégé, notamment
au niveau de sa prise électrique et
de l’endroit où il est relié à l’appareil;
cela est également valable pour une
éventuelle rallonge électrique.
11. Utilisez exclusivement
des accessoires et des appareils
supplémentaires recommandés par
lefabricant.
12. Utilisez
exclusivement des
chariots, des
diables,
desprésentoirs,
despieds et des
surfaces de travail recommandés par le
fabricant ou livrés avec le produit.
Déplacezprécautionneusement tout
chariot ou diable chargé pour éviter
d’éventuelles blessures en cas dechute.
13. Débranchez l’appareil de la
tension secteur en cas d’orage ou si
l’appareil reste inutilisé pendant une
longue période de temps.
14. Les travaux d’entretien de
l’appareil doivent être e ectués
uniquement par du personnel qualifié.
Aucunentretien n’est nécessaire sauf si
l’appareil est endommagé de quelque
façon que ce soit (dommagessur le
cordon d’alimentation ou la prise par
exemple), siun liquide ou un objet
a pénétré à l’intérieur du châssis, si
l’appareil a été exposé à la pluie ou
à l’humidité, s’il ne fonctionne pas
correctement ou à la suite d’une chute.
15. L’appareil doit être connecté à une
prise secteur dotée d’une protection
par mise à la terre.
16. La prise électrique ou la prise
IEC de tout appareil dénué de bouton
marche/arrêt doit rester accessible
enpermanence.
17. Mise au rebut
appropriée de ce
produit: Ce symbole
indique qu’en accord
avec la directive DEEE
(2012/19/EU) et les lois en vigueur dans
votre pays, ce produit ne doit pas être
jeté avec les déchets ménagers.
Ce produit doit être déposé dans un
point de collecte agréé pour le
recyclage des déchets d’équipements
électriques et électroniques (EEE).
Une mauvaise manipulation de ce type
de déchets pourrait avoir un impact
négatif sur l’environnement et la santé
à cause des substances potentiellement
dangereuses généralement associées à
ces équipements. En même temps,
votre coopération dans la mise au rebut
de ce produit contribuera à l’utilisation
e cace des ressources naturelles.
Pour plus d’informations sur l’endroit
où vous pouvez déposer vos déchets
d’équipements pour le recyclage,
veuillez contacter votre mairie ou votre
centre local de collecte des déchets.
18. N’installez pas l’appareil dans un
espace con né tel qu’une bibliothèque
ou meuble similaire.
19. Ne placez jamais d’objets
en ammés, tels que des bougies
allumées, sur l’appareil.
20. Gardez à l’esprit l’impact
environnemental lorsque vous mettez
des piles au rebus. Les piles usées
doivent être déposées dans un point de
collecte adapté.
21. Utilisez l’appareil dans un climat
tropical et/ou modéré.
MUSIC Group ne peut être tenu
pour responsable pour toute perte
pouvant être subie par toute personne
se  ant en partie ou en totalité à
toute description, photographie
ou a rmation contenue dans ce
document. Les caractéristiques,
l’apparence et d’autres informations
peuvent faire l’objet de modi cations
sans noti cation. Toutes les marques
appartiennent à leurs propriétaires
respectifs. MIDAS, KLARK TEKNIK,
LAB GRUPPEN, LAKE, TANNOY,
TURBOSOUND, TC ELECTRONIC,
TC HELICON, BEHRINGER, BUGERA
et DDA sont des marques ou
marques déposées de MUSIC Group
IP Ltd. © MUSIC Group IP Ltd.
2016 Tous droits réservés.
Pour connaître les termes et conditions
de garantie applicables, ainsi que
les informations supplémentaires et
détaillées sur la Garantie Limitée de
MUSIC Group, consultez le site Internet
music-group.com/warranty.
Vorsicht
Die mit dem Symbol
markierten Anschlüsse
führen so viel Spannung, dassdie
Gefahr eines Stromschlags besteht.
Verwenden Sie nur hochwertige,
professionelle Lautsprecherkabel
mit vorinstallierten 6,35 mm
MONO-Klinkensteckern oder
Lautsprecherstecker mit
Drehverriegelung. Alle anderen
Installationen oder Modi kationen
sollten nur von quali ziertem
Fachpersonal ausgeführt werden.
Achtung
Um eine Gefährdung
durch Stromschlag
auszuschließen, darf die
Geräteabdeckung bzw.
Geräterückwandnicht abgenommen
werden. ImInnern des Geräts be nden
sich keine vom Benutzer reparierbaren
Teile. Reparaturarbeiten dürfen
nur von quali ziertem Personal
ausgeführtwerden.
Consignes de sécurité
DÉNI LÉGAL
GARANTIE LIMITÉE
Wichtige
Sicherheitshinweise
6 7Quick Start GuideMR12
Achtung
Um eine Gefährdung
durch Feuer bzw.
Stromschlag auszuschließen, darf
dieses Gerät weder Regen oder
Feuchtigkeit ausgesetzt werden
noch sollten Spritzwasser oder
tropfende Flüssigkeiten in das Gerät
gelangen können. Stellen Sie keine
mit Flüssigkeit gefüllten Gegenstände,
wie z. B. Vasen, aufdasGerät.
Achtung
Die Service-Hinweise sind
nur durch quali ziertes
Personal zu befolgen. Umeine
Gefährdung durch Stromschlag zu
vermeiden, führen Sie bitte keinerlei
Reparaturen an dem Gerät durch,
dienicht in der Bedienungsanleitung
beschrieben sind. Reparaturen
sind nur von quali ziertem
Fachpersonaldurchzuführen.
1. Lesen Sie diese Hinweise.
2. Bewahren Sie diese Hinweise auf.
3. Beachten Sie alle Warnhinweise.
4. Befolgen Sie alle
Bedienungshinweise.
5. Betreiben Sie das Gerät nicht in
der Nähe vonWasser.
6. Reinigen Sie das Gerät mit einem
trockenen Tuch.
7. Blockieren Sie nicht die
Belüftungsschlitze. Beachten
Sie beim Einbau des Gerätes die
Herstellerhinweise.
8. Stellen Sie das Gerät nicht in der
Nähe von Wärmequellen auf. Solche
Wärmequellen sind z. B. Heizkörper,
Herde oder andere Wärme erzeugende
Geräte (auch Verstärker).
9. Entfernen Sie in keinem Fall
die Sicherheitsvorrichtung von
Zweipol- oder geerdeten Steckern. Ein
Zweipolstecker hat zwei unterschiedlich
breite Steckkontakte. Ein geerdeter
Stecker hat zwei Steckkontakte
und einen dritten Erdungskontakt.
Derbreitere Steckkontakt oder der
zusätzliche Erdungskontakt dient
Ihrer Sicherheit. Falls das mitgelieferte
Steckerformat nicht zu Ihrer Steckdose
passt, wenden Sie sich bitte an
einen Elektriker, damit die Steckdose
entsprechend ausgetauscht wird.
10. Verlegen Sie das Netzkabel so,
dass es vor Tritten und scharfen Kanten
geschützt ist und nicht beschädigt
werden kann. Achten Sie bitte
insbesondere im Bereich der Stecker,
Verlängerungskabel und an der Stelle,
an der das Netzkabel das Gerät verlässt,
aufausreichendenSchutz.
11. Das Gerät muss jederzeit mit
intaktem Schutzleiter an das Stromnetz
angeschlossen sein.
12. Sollte der Hauptnetzstecker
oder eine Gerätesteckdose die
Funktionseinheit zum Abschalten sein,
muss diese immer zugänglich sein.
13. Verwenden Sie nur Zusatzgeräte/
Zubehörteile, dielaut Hersteller
geeignet sind.
14. Verwenden
Sie nur Wagen,
Standvorrich-
tungen, Stative,
Halter oder Tische,
die vom Hersteller
benannt oder im Lieferumfang des
Geräts enthalten sind. Falls Sie einen
Wagen benutzen, seien Sie vorsichtig
beim Bewegen der
Wagen- Gerätkombination,
umVerletzungen durch Stolpern
zuvermeiden.
15. Ziehen Sie den Netzstecker bei
Gewitter oder wenn Sie das Gerät
längere Zeit nicht benutzen.
16. Lassen Sie alle Wartungsarbeiten
nur von quali ziertem Service-
Personal ausführen. EineWartung
ist notwendig, wenn das Gerät in
irgendeiner Weise beschädigt wurde
(z. B. Beschädigung des Netzkabels
oder Steckers), Gegenstände oder
Flüssigkeit in das Geräteinnere gelangt
sind, das Gerät Regen oder Feuchtigkeit
ausgesetzt wurde, das Gerät nicht
ordnungsgemäß funktioniert oder auf
den Boden gefallen ist.
17. Korrekte
Entsorgung dieses
Produkts: Dieses Symbol
weist darauf hin, das
Produkt entsprechend
der WEEE Direktive (2012/19/EU) und
der jeweiligen nationalen Gesetze nicht
zusammen mit Ihren Haushaltsabfällen
zu entsorgen. DiesesProdukt sollte bei
einer autorisierten Sammelstelle für
Recycling elektrischer und
elektronischer Geräte (EEE) abgegeben
werden. Wegen bedenklicher
Substanzen, diegenerell mit
elektrischen und elektronischen
Geräten in Verbindung stehen, könnte
eine unsachgemäße Behandlung dieser
Abfallart eine negative Auswirkung auf
Umwelt und Gesundheit haben.
Gleichzeitig gewährleistet Ihr Beitrag
zur richtigen Entsorgung dieses
Produkts die e ektive Nutzung
natürlicher Ressourcen. Fürweitere
Informationen zur Entsorgung Ihrer
Geräte bei einer Recycling-Stelle
nehmen Sie bitte Kontakt zum
zuständigen städtischen Büro,
Entsorgungsamt oder zu Ihrem
Haushaltsabfallentsorgerauf.
18. Installieren Sie das Gerät nicht
in einer beengten Umgebung, zum
Beispiel Bücherregal oder ähnliches.
19. Stellen Sie keine Gegenstände mit
o enen Flammen, etwa brennende
Kerzen, auf das Gerät.
20. Beachten Sie bei der Entsorgung
von Batterien den Umweltschutz-
Aspekt. Batterien müssen bei einer
Batterie-Sammelstelle entsorgt
werden.
21. Verwenden Sie das Gerät in
tropischen und/oder gemäßigten
Klimazonen.
MUSIC Group übernimmt keine
Haftung für Verluste, die Personen
entstanden sind, die sich ganz
oder teilweise auf hier enthaltene
Beschreibungen, Fotos oder Aussagen
verlassen haben. Technische Daten,
Erscheinungsbild und andere
Informationen können ohne vorherige
Ankündigung geändert werden.
Alle Warenzeichen sind Eigentum
der jeweiligen Inhaber. MIDAS,
KLARK TEKNIK, LAB GRUPPEN,
LAKE, TANNOY, TURBOSOUND,
TC ELECTRONIC, TC HELICON,
BEHRINGER, BUGERA und DDA sind
Warenzeichen oder eingetragene
Warenzeichen der MUSIC Group
IP Ltd. © MUSIC Group IP Ltd.
2016 Alle Rechte vorbehalten.
Die geltenden Garantiebedingungen
und zusätzliche Informationen
bezüglich der von MUSIC Group
gewährten beschränkten Garantie
nden Sie online unter music-group.
com/warranty.
Aviso!
Terminais marcados
com o símbolo carregam
corrente elétrica de magnitude
su ciente para constituir um risco de
choque elétrico. Use apenas cabos
de alto-falantes de alta qualidade
com plugues TS de ¼" ou plugues
com trava de torção pré-instalados.
Todas as outras instalações e
modi cações devem ser efetuadas por
pessoasquali cadas.
Este símbolo, onde quer
que o encontre, alerta-o
para a leitura das
instruções de manuseamento que
acompanham o equipamento. Por favor
leia o manual deinstruções.
Atenção
De forma a diminuir
o risco de choque
eléctrico, nãoremover a cobertura
(ouasecção de trás). Não existem peças
substituíveis por parte do utilizador no
seu interior. Para esse efeito recorrer a
um técnicoquali cado.
Atenção
Para reduzir o risco de
incêndios ou choques
eléctricos o aparelho não deve ser
exposto à chuva nem à humidade.
Alémdisso, não deve ser sujeito a
salpicos, nem devem ser colocados em
cima do aparelho objectos contendo
líquidos, taiscomojarras.
Atenção
Estas instruções de
operação devem ser
utilizadas, emexclusivo, por técnicos
de assistência quali cados. Para evitar
choques eléctricos não proceda a
reparações ou intervenções, que
não as indicadas nas instruções
de operação, salvo se possuir as
quali -cações necessárias. Para evitar
choques eléctricos não proceda a
reparações ou intervenções, que
não as indicadas nas instruções de
operação. Só o deverá fazer se possuir
as quali caçõesnecessárias.
1. Leia estas instruções.
2. Guarde estas instruções.
3. Preste atenção a todos os avisos.
4. Siga todas as instruções.
5. Não utilize este dispositivo perto
de água.
6. Limpe apenas com um pano seco.
7. Não obstrua as entradas de
ventilação. Instale de acordo com as
instruções do fabricante.
8. Não instale perto de quaisquer
fontes de calor tais como radiadores,
bocas de ar quente, fogões de sala
ou outros aparelhos (incluindo
ampli cadores) que produzam calor.
9. Não anule o objectivo de
segurança das  chas polarizadas ou
do tipo de ligação à terra. Uma  cha
polarizada dispõe de duas palhetas
sendo uma mais larga do que a outra.
Uma  cha do tipo ligação à terra dispõe
de duas palhetas e um terceiro dente
de ligação à terra. A palheta larga ou
o terceiro dente são fornecidos para
sua segurança. Se a  cha fornecida
não encaixar na sua tomada, consulte
um electricista para a substituição da
tomada obsoleta.
10. Proteja o cabo de alimentação de
pisadelas ou apertos, especialmente
nas  chas, extensões, e no local de
saída da unidade. Certi que-se de
que o cabo eléctrico está protegido.
Veri que particularmente nas  chas,
nos receptáculos e no ponto em que o
cabo sai doaparelho.
11. O aparelho tem de estar sempre
conectado à rede eléctrica com o
condutor de protecção intacto.
12. Se utilizar uma  cha de
rede principal ou uma tomada de
aparelhos para desligar a unidade
de funcionamento, esta deve estar
sempre acessível.
13. Utilize apenas ligações/acessórios
especi cados pelofabricante.
14. Utilize apenas
com o carrinho,
estrutura, tripé,
suporte, ou mesa
especi cados pelo
fabricante ou
vendidos com o dispositivo.
Quandoutilizar um carrinho, tenha
cuidado ao mover o conjunto carrinho/
dispositivo para evitar danos provocados
pela terpidação.
15. Desligue este dispositivo durante
as trovoadas ou quando não for
utilizado durante longos períodos
detempo.
16. Qualquer tipo de reparação
deve ser sempre efectuado por
pessoal quali cado. É necessária uma
reparação sempre que a unidade tiver
sido de alguma forma dani cada,
como por exemplo: no caso do cabo de
alimentação ou  cha se encontrarem
dani cados; naeventualidade de
líquido ter sido derramado ou objectos
terem caído para dentro do dispositivo;
no caso da unidade ter estado exposta
à chuva ou à humidade; seesta
não funcionar normalmente, ou se
tiver caído.
17. Correcta eliminação
deste produto: este
símbolo indica que o
produto não deve ser
eliminado juntamente
com os resíduos domésticos, segundo a
Directiva REEE (2012/19/EU) e a legislação
nacional. Este produto deverá ser levado
para um centro de recolha licenciado para
a reciclagem de resíduos de
equipamentos eléctricos e electrónicos
(EEE). O tratamento incorrecto deste tipo
de resíduos pode ter um eventual
impacto negativo no ambiente e na
BESCHRÄNKTE GARANTIE
HAFTUNGSAUSSCHLUSS
Instruções de
Segurança Importantes
8 9Quick Start GuideMR12
saúde humana devido a substâncias
potencialmente perigosas que estão
geralmente associadas aos EEE. Ao
mesmo tempo, a sua colaboração para a
eliminação correcta deste produto irá
contribuir para a utilização e ciente dos
recursos naturais. Paramais informação
acerca dos locais onde poderá deixar o
seu equipamento usado para reciclagem,
é favor contactar os serviços municipais
locais, a entidade de gestão de resíduos
ou os serviços de recolha de
resíduosdomésticos.
18. Não instale em lugares
con nados, tais como estantes ou
unidades similares.
19. Não coloque fontes de
chama, tais como velas acesas,
sobre o aparelho.
20. Favor, obedecer os aspectos
ambientais de descarte de bateria.
Baterias devem ser descartadas em um
ponto de coletas de baterias.
21. Use este aparelho em climas
tropicais e/ou moderados.
O MUSIC Group não se responsabiliza
por perda alguma que possa ser
sofrida por qualquer pessoa que
dependa, seja de maneira completa
ou parcial, de qualquer descrição,
fotogra a, ou declaração aqui
contidas. Dados técnicos, aparências
e outras informações estão sujeitas
a modi cações sem aviso prévio.
Todas as marcas são propriedade
de seus respectivos donos. MIDAS,
KLARK TEKNIK, LAB GRUPPEN,
LAKE, TANNOY, TURBOSOUND,
TC ELECTRONIC, TC HELICON,
BEHRINGER, BUGERA e DDA são
marcas ou marcas registradas do
MUSIC Group IP Ltd. © MUSIC Group IP
Ltd. 2016 Todos direitos reservados.
Para obter os termos de garantia
aplicáveis e condições e informações
adicionais a respeito da garantia
limitada do MUSIC Group, favor
veri car detalhes na íntegra através do
website music-group.com/warranty.
GARANTIA LIMITADA
LEGAL RENUNCIANTE
10 11Quick Start GuideMR12
Step 1: Hook-Up
MR12 live performance
with optional sub mixer
*iPad is a trademark of Apple Inc. iPad is not included.
Active loudspeakers
USB
Flash
Drive
iPad* for remote control
Sub mixer (optional)
Insert sends from mixer
Active monitors
Headphones
Wireless router (optional)
DIGITAL iPAD/TABLET MIXER MR12 Hook-up
12 13Quick Start GuideMR12
Step 1: Hook-Up
DIGITAL iPAD/TABLET MIXER MR12 Hook-up
*Mac is a trademark of Apple, Inc. Linux is the registered trademark of Linus Torvalds in the U.S.
and other countries. Android is a trademark of Google, Inc.
MIC/LINE IN
STEREO REC
(VARIOUS SOURCES)
STEREO PLAY
(SPECIFIC “USB”
STEREO
INPUT CHANNEL)
MAIN OUT L-R
AUX SEND 1-2
ETHERNET
Hi-Z
LINE IN
PHONES STEREO
AUDIO INPUTS
USB RECORDER
AUDIO I/OMIXER CONTROL
DSP ENGINE
MIDI I/O
WIRED CONTROL
ACCESS
POINT*
WIFI
CLIENT*
WIRELESS
CONTROL
AUDIO OUTPUTS
LEVEL
DSP
ACCESS POINT
WIFI CLIENT
ETHERNET
Router
Router
WIFI CLIENT mode (Mobile Devices with Wi)
ETHERNET mode
Computer with Ethernet port
Mobile Devices with Wi
CAT-5
cable
CAT-5 cable
ACCESS POINT mode (Mobile Devices with Wi)
iOS/Android*
X-TOUCH
or any other MIDI /
Mackie Control
compatible Controller
*ACCESS POINT mode:
- available channels: 1-11
- max. 4 Wi clients
- bandwidth limited by Wi adapter
*WIFI CLIENT mode:
- available channels: 1-11
*Ch. 13-16 fed by any IN 1-12
(Signal Split, e.g. for
monitoring with dierent EQ)
*PRE-DEFINED BUSES
Also used for monitoring
4 STEREO FX SLOTS
DSP-MIXER CH.
MONO IN 1-16
USB/AUX IN (STEREO)
FX RETURN 1-4 (STEREO)
DSP-MIXER BUSES
PRE-DEFINED AS SUBGROUPS*
XR12: BUSES 3/4/5/6
XR16: BUSES 5/6
Win/Mac*/Linux*
Win/Mac/Linux
iOS/Android
iOS/Android Android
Win/Mac/Linux
or
DACs
DACs
4 STEREO FX SLOTS
DSP-MIXER CH.
MONO IN 1-16*
USB/AUX IN (STEREO)
FX RETURN 1-4 (STEREO)
DSP-MIXER BUSES
PRE-DEFINED AS SUBGROUPS*
MR12: BUSES 3/4/5/6
ADCs
RTA METER
DACs
ADCs
14 15Quick Start GuideMR12
Step 2: Controls
DIGITAL iPAD/TABLET MIXER MR12 Controls
(1)
ETHERNET port allows the mixer
to be controlled via LAN or
connected Wi router.
(2)
REMOTE switch selects
between Ethernet, Wi client,
or Access Point. See the Network
Connection chapter for details.
(3)
RESET button resets the console
to default network parameters
when held for 2 seconds. When
held for 10 seconds, all console
functions are reset to factory
default status.
(4)
MIDI IN/OUT jacks send
and receive MIDI signals to and
from external equipment. See
the MIDI Implementation chart
for details.
(5)
USB port (type A) accepts a
ash drive for  le storage, stereo
recordings and playback. The red
LED next to it indicates  le access.
Do not remove the USB  ash drive
while it is lit!
(6)
XLR COMBO jacks accept balanced
and unbalanced XLR and ¼" plugs.
(7)
¼" inputs accept balanced or
unbalanced ¼" plugs. Channel
11 and 12 accept high impedance
sources for direct connection of
guitars and basses.
(8)
AUX SEND jacks send your
monitor mixes to stage monitors
or headphone mixers.
(9)
MAIN L/R jacks send the main mix
signal to PA or monitor speakers
via XLR cables.
(10)
HEADPHONE jack accepts a ¼"
TRS plug for connecting a pair of
headphones.
(11)
PHONES LEVEL knob determines
the output of the headphones jack.
(12)
POWER switch turns the mixer on
and o . The front panel LED will
light when the unit is powered on.
(1) (2) (3) (4) (5)
(7) (8)
(9)
(6)
(10)
(10)
(11)
16 17Quick Start GuideMR12
Step 3: Network
Connection
DIGITAL iPAD/TABLET MIXER MR12 Network Connection
Network Connection
The MR12 eliminates all hassles by
incorporating a wireless network router
that gives access to the mixer in three di
erent ways–via Ethernet LAN, or wirelessly
as a Wi Client or as an Access Point.
Selection is made with the REMOTE switch
[2]. You may view or change the network
preferences for these on any of the remote
control applications on the ‘Setup/
Network’ page.
IP Address and DHCP
Depending on the connection scenario, the
MR12 o ers up to 3 options for connecting
a tablet or PC for software control – DHCP
Client, DHCP Server, and  xed IP operation.
Connection is achieved di erently
depending on which option you choose:
DHCP Client mode is available in Ethernet
LAN or Wi Client operation. The mixer will
automatically request an IP lease from the
DHCP server that owns the IP addresses
in the network to which you are trying
to connect.
DHCP Server (DHCPS) is optionally
available for Ethernet LAN connections
and is standard in Access Point operation.
The mixer will own the IP addresses and
provide IP leases to devices requesting
access to that network. The mixer will
always use IP address 192.168.1.1 and
assign IP addresses 192.168.1.101 –
192.168.1.132 to its clients.
Static IP is available for Ethernet LAN
and Wi Client operation. The mixer will
use the  xed (static) IP address, subnet
mask and gateway that you specify for
registering on the network. Make sure that
the addresses you specify manually are
not con icting with any other addresses
on the same network. We generally
recommend using the DHCP mode, unless
you have a very speci c reason to set it up
manually.
Note: Changing parameters of the
currently selected connection mode will
disconnect the software from the console.
If the console is erroneously con gured for
a  xed IP address that is incompatible with
the network it is connected to, the console
will be inaccessible. In this case, one of the
other two connection modes can be used
to regain access and amend the settings. If
that does not work, hold the Reset button
for 2 seconds to return to default
network settings.
Mixer name and Ethernet setup screen
Ethernet/LAN
This mode supports DHCP Client (default),
DHCP Server, and  xed IP operation.
Note that if the MR12 is connected
to a network where no DHCP server
is present, the mixer will generate an
automatic IP address (range 169.254.1.0
– 169.254.254.255). There are no security
options for LAN connections, so any
device in that network may take control
of connected MR12 consoles. When
connecting via LAN/Ethernet to a Wi
router, make sure the security settings of
that router prevent unauthorized access.
Wi Client setup screen
Wi Client
This mode supports DHCP Client (default)
and  xed IP operation. The MR12 can
support WEP, WPA and WPA2 security
mechanisms in Wi Client mode and works
on Wi channels 1-11.
Correct SSID (network name) and
password need to be supplied to
connect to an existing network. WEP
passwords have to be either 5 characters
or 13 characters long. If the supplied
SSID and password are incorrect, the
mixer cannot be accessed. In this case
the networking parameters have
to be reset and another connection
mode has to be used to regain access.
The Ethernet connection mode may
be used for con guration of the Wi
Client mode. While being connected
in Ethernet mode, the mixer can scan
the available wireless networks and
display their SSID network names,
eld strength and security method. By
selecting the preferred wireless network,
this information can be copied to the
applications’ Wi Client setup page
automatically. You will then be prompted
to  ll in the security password of that
network. After switching from Ethernet
to Wi Client mode, the mixer should
connect to the selected wireless network
automatically, and will be displayed
by remote applications on any device
connected to the same network.
Access Point setup screen
Access Point
This mode only supports DHCP Server
operation with a maximum of 4 clients,
working on Wi channels 1-11. Security
is supported via WEP 40-bit (5 ASCII
characters) or WEP 104-bit (13 ASCII
characters). By default, the mixer will use
a network name consisting of the model
name plus the last bits of the mixer’s
unique MAC address (e.g. MR12-17-BE-C0).
The default IP address is 192.168.1.1 and no
security is engaged.
The control software is available
for Android and iPad tablets as
well as PC/Mac/Linux computers.
Visit midasconsoles.com to download
the PC/Mac/Linux software. The
tablet software can be downloaded
from the app store on your device.
To learn more about operating the
control software, visit the product page
on midasconsoles.com to download the
full manual.
18 19Quick Start GuideMR12
Step 3: Network
Connection
Getting Started
First Wi remote connection to your
MR12 mixer
1. Download and install the remote
control app for your device.
• Android smartphones/tablets:
M-AIR Android from the Google
Play* store
• iPad: M-AIR for iPad from the
App Store
• PC: M-AIR EDIT for
Windows*, Mac or Linux from
midasconsoles.com
2. Set the REMOTE switch on your
mixer to ACCESS POINT mode and
power on the mixer.
3. Reset your mixer’s network
settings to default values by
holding the RESET button for 2
seconds. This is located in the
small hole above the Wi icon and
requires a paper clip or similar tool
to reach.
4. Switch your remote control device
on and open the network settings.
Android smartphones/tablets:
1. Start the Settings/Wireless
& Networks dialog on your
Android system.
2. Switch “Wi ” on.
3. Click on ‘Wi ’ to select a network.
From the list of networks,
select your M-AIR mixer’s name,
e.g. “MR12-19-1B-07”. After a few
seconds, the status should change
to ‘Connected’.
4. Open your M-AIR for Android
app and it will show similar
information:
• Mix Access = All
• IP Address = 192.168.1.1
• Wi Lock = None
• Wi connected to
MR12-19-1B-07
5. You may choose to lock the
connection to this speci c Wi
network if you want to ensure that
your device cannot automatically
connect to another network while
you are controlling your mixer.
6. Click on “Connect” and tap on
the mixer’s name in order to
connect the app with your mixer.
Note - if a warning pops up telling
you that the mixer  rmware is not
supported, it is recommended to
update the  rmware to the latest
version (seethe MR12 pages on
midasconsoles.com for details).
You can, however, choose to
connect anyway.
7. Once the app is connected to
your mixer, allparameters will
be loaded automatically. Enjoy
exploring all mixing functions of
your mixer remotely!
iPad:
1. Start the Settings/Wi dialog on
your iOS.
2. Switch “Wi ” on.
3. Select your mixer’s name
from the list of networks, e.g.
“MR12-19-1B-07”. After a couple of
seconds, the status should change
to “Connected”, indicated by a
checkmark.
4. Open your M-AIR for iPad app
and it will show any mixers
(“Devices”) found in that network,
with their IP address, which in this
case is 192.168.1.1.
5. Tap on the mixer’s icon to connect
the app with your mixer.
Note - if a warning pops up telling
you that the mixer  rmware is not
supported, it is recommended to
update the  rmware to the latest
version (see the MR12 pages on
midasconsoles.com for details).
You can, however, choose to
connect anyway.
6. Once the app is connected to
your mixer, all parameters will
be loaded automatically. Enjoy
exploring all mixing functions of
your mixer remotely!
PC: M-AIR EDIT for Windows,
Mac or Linux
1. Open the Wireless Network
Connections dialog on your
operating system.
2. Make sure the “WLAN” or “Wi ”
adapter is switched on.
3. View the list of wireless networks
and select your mixer’s name,
e.g. “MR12-19-1B-07”. After a
couple of seconds, the status
should change to “Connected”,
indicated by a check mark.
4. Open your M-AIR Editor for Win/
Mac/Linux and click on “Setup”.
The list will show any mixers found
in that network, withtheir name
and IP address, which in this case
is 192.168.1.1.
5. Click on your mixer’s name,
e.g. “MR18-19-1B-07”, and con rm
to synchronize from mixer to PC in
order to connect the app with your
mixer. Ifa warning pops up telling
you that the mixer  rmware is not
supported, it is recommended to
update the  rmware to the latest
version (see the MR12 pages on
midasconsoles.com for details).
You can, however, choose to
connect anyway.
6. Once the app is connected to
your mixer, all parameters will
be transferred automatically.
Enjoy exploring all mixing
functions of your mixer remotely!
* App Store is a service mark of Apple Inc. Google Play is a trademark of Google Inc. Windows is either a
registered trademark or trademark of Microsoft Corporation in the United States and/or other countries.
DIGITAL iPAD/TABLET MIXER MR12 Network Connection
20 21Quick Start GuideMR12
DIGITAL iPAD/TABLET MIXER MR12 USB Recorder Speci cations
Step 4: USB Recorder
The USB port (type A) accepts a  ash
drive for  le storage, stereo recordings
and playback. The operation is remote
controlled via remote apps.
1. Supported  le system: FAT32.
2. Supported audio  le format:
WAV, 16-bit, 44.1 or 48.0 kHz –
depending on mixer sample rate.
3. Maximum recording time: approx.
3 hours for each  le, with a  le size
limit of 2 GB.
MIDI Parameter Implementation
MIDI RX / TX CH CMD No. Value Comment
Snapshots 1 Prg Chg 1-64
Program Changes 1-64 on Channel 1
can be used to recall snapshots 1-64
stored inside mixers.
Fader
CH Faders 1 CC 0-15 0/127 Input Channels 1-16
CH Faders 1 CC 16 0/127 USB Recorder Playback (stereo)
CH Faders 1 CC 17-20 0/127 FX1-4 Return (stereo)
Send Faders 1 CC 21-26 0/127 Aux Sends / Subgroups
Send Faders 1 CC 27-30 0/127 Fx1-4
Main Fader 1 CC 31 0/127 Main LR (stereo)
Mute
CH Mutes 2 CC 0-15 0/127 Input Channels
CH Mutes 2 CC 16 0/127 USB Recorder Playback (stereo)
CH Mutes 2 CC 17-20 0/127 FX1-4 Return (stereo)
Send Mutes 2 CC 21-26 0/127 Aux Sends / Subgroups
Send Mutes 2 CC 27-30 0...127 FX1-4
Main Mute 2 CC 31 0/127 Main LR (stereo)
Panorama/Balance
CH PAN 3 CC 0-15 1...127
Panorama Input Channels; value 64 =
center
CH PAN 3 CC 16 1...127
Balance USB Recorder Playback (stereo);
value 64 = center
CH PAN 3 CC 17-20 1...127
Balance FX 1-4 Return (stereo);
value 64 = center
Aux PAN
(Subgroup)
3 CC 21-26 1...127
Panorama Aux Sends / Subgroups;
value 64 = center
Main Balance 3 CC 31 1...127
Balance Main LR (stereo);
value 64 = stereo
X OSC
Text based OSC SYX
Open Sound Control via
Sysex F0 00 20 32 32 TEXT F7
With ‘TEXT’ being OSC strings in
hex format, up to 39 kB in length
22 23Quick Start GuideMR12
Speci cations
Processing
Number of processing channels
16 input channels, 1 stereo USB return
channel, 4 stereo FX return channels,
6 aux buses, main LR
Internal e ects engines 4 true stereo
Signal processing 40-bit  oating point
A/D-D/A conversion
24-bit @ 44.1 / 48 kHz,
115 dB dynamic range
Analog I/O latency* 0.8 ms
Connectors
Programmable mic preamps, designed by MIDAS PRO 4 XLR/TRS combo jacks, balanced
Line inputs 8 TRS, balanced
Main outputs 2 XLR, balanced
Aux outputs 2 TRS, balanced
Phones outputs 1 TRS
MIDI inputs / outputs 1/1 DIN
Ethernet 1 RJ45
USB port Type A
Mic Input Characteristics
Preamp design MIDAS PRO
THD + noise, unity gain, 0 dBu, 1 kHz 0.005%, unweighted
Phantom power, switchable per input 48 V
EIN noise, at +60 dB gain, 150R source -125 dBu, 22 Hz - 22 kHz unweighted
CMRR, XLR, 1 kHz @ unity gain Typically 65 dB
CMRR, XLR, 1 kHz @ +60 dB gain Typically 90 dB
Input/Output Characteristics
Frequency range, @ 48 kHz sample rate, +/- 0.5 dB dB 20 Hz - 20 kHz
Dynamic range, analog in to analog out 108 db, 22 Hz - 22 kHz unweighted
A/D dynamic range, preamp to converter 110 db, 22 Hz - 22 kHz unweighted
D/A dynamic range, converter and output 111 db, 22 Hz - 22 kHz unweighted
Cross talk rejection @ 1 kHz, adjacent channels 90 dB
Mic/Line 1-4 input impedance XLR jack, unbal. / bal. 10 kΩ
Non clip maximum input level, XLR +23.5 dBu
Hi-Z input impedance TRS jack, unbal. / bal. 1 M / 2 M
Line input 5-10 impedance TRS jack, unbal. / bal. 20 k / 40 k
Non clip maximum input level, TRS +21 dBu
Output Characteristics
Output impedance, XLR 50 Ω
Maximum output level, XLR +21 dBu
Aux 1-2 output impedance, TRS 50 Ω
Aux 1-2 maximum output level, TRS +21 dBu
Phones output impedance 50 
Maximum phones output level +21 dBu
Noise @ unity gain, 1 input assigned, XLR and TRS -87 dBu, 22 Hz - 22 kHz unweighted
Noise when muted, XLR and TRS -90 dBu, 22 Hz - 22 kHz unweighted
WLAN Module
Antenna External, SMA connector, 50 Ω
Access Point, number of clients Max. 4
IEEE 802.11 b/g standard 2.4 GHz
Frequency Range 2412-2462 MHz
WLAN channels (Wi Client, Access Point) 1-11
Max Output Power 19 dBm (802.11 b) / 18 dBm (802.11 g)
Power
Switch-mode power supply Autorange 100-240 V, (50/60 Hz)
Power consumption 30 W
Physical
Standard operating temperature range 5°C – 40°C (41°F – 104°F)
Dimensions
333 (W) x 149 (D) x 95 (H) mm,
(13.1 x 5.9 x 3.7")
Weight 2.9 kg (6.4 lbs)
*including all channel and bus processing, excluding insert e ects
24 25Quick Start GuideMR12
Other important information
1. Register online.
Pleaseregister your new MUSIC Group
equipment right after you purchase
it by visiting midasconsoles.com.
Registeringyour purchase using our
simple online form helps us to process
your repair claims more quickly and
e ciently. Also, read the terms and
conditions of our warranty, ifapplicable.
2. Malfunction. Should your
MUSICGroup Authorized Reseller not be
located in your vicinity, you may contact
the MUSIC Group Authorized Ful ller for
your country listed under “Support” at
midasconsoles.com. Shouldyour country
not be listed, pleasecheck if your problem
can be dealt with by our “OnlineSupport”
which may also be found under “Support”
at midasconsoles.com. Alternatively,
please submit an online warranty claim
at midasconsoles.com BEFORE returning
theproduct.
3. Power Connections.
Beforeplugging the unit into a power
socket, please make sure you are using the
correct mains voltage for your particular
model. Faulty fuses must be replaced
with fuses of the same type and rating
withoutexception.
1. Registro online.
Lerecomendamos que registre su
nuevo aparato MUSIC Group justo
después de su compra accediendo a
la página web midasconsoles.com.
Elregistro de su compra a través de
nuestro sencillo sistema online nos
ayudará a resolver cualquier incidencia
que se presente a la mayor brevedad
posible. Además,aproveche para leer
los términos y condiciones de nuestra
garantía, siesaplicable en sucaso.
2. Averías. En el caso de que no
exista un distribuidor MUSIC Group en
las inmediaciones, puede ponerse en
contacto con el distribuidor MUSIC Group
de su país, queencontrará dentro del
apartado “Support” de nuestra página
web midasconsoles.com. En caso de
que su país no aparezca en ese listado,
acceda a la sección “Online Support”
(quetambiénencontrará dentro
del apartado “Support” de nuestra
páginaweb) y compruebe si su problema
aparece descrito y solucionado allí.
Deforma alternativa, envíenos a través
de la página web una solicitud online de
soporte en periodo de garantía ANTES de
devolvernoselaparato.
3. Conexiones de corriente.
Antes de enchufar este aparato a una
salida de corriente, asegúrese de que
dicha salida sea del voltaje adecuado
para su modelo concreto. En caso de
que deba sustituir un fusible quemado,
deberáhacerlo por otro de idénticas
especi caciones, sinexcepción.
1. Enregistrez-vous
enligne. Prenezle temps
d’enregistrer votre produit MUSIC Group
aussi vite que possible sur le site Internet
midasconsoles.com. Lefait d’enregistrer
le produit en ligne nous permet de gérer
les réparations plus rapidement et plus
e cacement. Prenezégalement le
temps de lire les termes et conditions de
notregarantie.
2. Dysfonctionnement. Si vous
n’avez pas de revendeur MUSIC Group
près de chez vous, contactez le distributeur
MUSIC Group de votre pays: consultez la
liste des distributeurs de votre pays dans
la page “Support” de notre site Internet
midasconsoles.com. Si votre pays n’est
pas dans la liste, essayez de résoudre votre
problème avec notre “aideen ligne” que
vous trouverez également dans la section
“Support” du site midasconsoles.com.
Vouspouvez également nous faire
parvenir directement votre demande de
réparation sous garantie par Internet sur
le site midasconsoles.com AVANT de nous
renvoyer leproduit.
3. Raccordement au secteur.
Avant de relier cet équipement au secteur,
assurez-vous que la tension secteur
de votre région soit compatible avec
l’appareil. Veillez à remplacer les fusibles
uniquement par des modèles exactement
de même taille et de même valeur
électrique — sans aucuneexception.
Important information
Aspectos importantes
Informations
importantes
1. Online registrieren.
Bitteregistrieren Sie Ihr
neues MUSICGroup-Gerät
direkt nach dem Kauf auf der
Website midasconsoles.com. WennSie
Ihren Kauf mit unserem einfachen online
Formular registrieren, könnenwir Ihre
Reparaturansprüche schneller und
e zienter bearbeiten. Lesen Sie bitte
auch unsere Garantiebedingungen,
fallszutre end.
2. Funktionsfehler. Sollte sich
kein MUSIC Group Händler in Ihrer Nähe
be nden, können Sie den MUSIC Group
Vertrieb Ihres Landes kontaktieren, der
auf midasconsoles.com unter „Support“
aufgeführt ist. Sollte Ihr Land nicht
aufgelistet sein, prüfen Sie bitte, ob Ihr
Problem von unserem „Online Support“
gelöst werden kann, den Sie ebenfalls
auf midasconsoles.com unter „Support“
nden. Alternativ reichen Sie bitte
Ihren Garantieanspruch online auf
midasconsoles.com ein, BEVOR Sie das
Produktzurücksenden.
3. Stromanschluss. Bevor Sie das
Gerät an eine Netzsteckdose anschließen,
prüfen Sie bitte, obSie die korrekte
Netzspannung für Ihr spezielles Modell
verwenden. Fehlerhafte Sicherungen
müssen ausnahmslos durch Sicherungen
des gleichen Typs und Nennwerts
ersetztwerden.
1. Registre-se online. Porfavor,
registreseu novo equipamento
MUSICGroup logo após a compra
visitando o site midasconsoles.com
Registrar sua compra usando nosso
simples formulário online nos ajuda
a processar seus pedidos de reparos
com maior rapidez e e ciência. Além
disso, leia nossos termos e condições de
garantia, caso sejanecessário.
2. Funcionamento
Defeituoso. Casoseufornecedor
MUSIC Group não esteja localizado
nas proximidades, vocêpode contatar
um distribuidor MUSICGroup para o
seu país listado abaixo de “Suporte”
emmidasconsoles.com. Se seu país
não estiver na lista, favor checar se seu
problema pode ser resolvido com o
nosso “SuporteOnline” que também
pode ser achado abaixo de “Suporte”em
midasconsoles.com. Alternativamente,
favorenviar uma solicitação de garantia
online em midasconsoles.com ANTES da
devolução doproduto.
3. Ligações. Antes de ligar a unidade
à tomada, assegure-se de que está a
utilizar a voltagem correcta para o modelo
em questão. Osfusíveis com defeito
terão de ser substituídos, sem qualquer
excepção, porfusíveis do mesmo tipo e
correntenominal.
Weitere wichtige
Informationen
Outras Informações
Importantes
27Quick Start Guide26 MR12
FEDERAL COMMUNICATIONS
COMMISSION COMPLIANCE INFORMATION
Responsible Party Name: Music Group Research
UK Limited
Address: Klark Industrial Park,
Walter Nash Road,
Kidderminster. Worcestershire. DY11 7HJ. England.
Phone Number: +44 1562 741515
MR12
complies with the FCC rules as mentioned in the following paragraph:
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Caution!
The manufacturer is not responsible for any radio or TV interference caused by unauthorized modi cations
to this equipment. Such modi cations could void the user authority to operate the equipment.
FCC RF Radiation Exposure Statement:
1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with a minimum distance of 20 centimeters between the
radiator and your body.
Warning: Operation of this equipment in a residential environment could cause radio interference.
MR12
This product conforms with essential requirements of RED Directive 2014/53/EU,
RoHS Directive 2011/65/EU and WEEE Directive - 2012/19/EU .
midasconsoles.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15

Midas MR12 Guide de démarrage rapide

MR12
Midas
Marque
Midas
Modèle
MR12
Catégorie
Contrôleurs DJ
Taper
Guide de démarrage rapide
Télécharger le PDF
rapport

dans d''autres langues

Documents connexes

Autres documents