HP Pavilion TouchSmart 23-f400 All-in-One Desktop PC series Le manuel du propriétaire

Taper
Le manuel du propriétaire
12” (30cm)
12” (30cm)
http://www.hp.com/go/contactHP
http://welcome.hp.com/country/us/en/wwcontact_us.html
Copyright and License
© Copyright 2012 Hewlett-Packard
Development Company, L.P.
The information contained herein is subject to
change without notice. The only warranties for
HP products and services are set forth in the
express warranty statements accompanying
such products and services. Nothing herein
should be construed as constituting an
additional warranty. HP shall not be liable for
technical or editorial errors or omissions
contained herein.
This product incorporates copyright protection
technology that is protected by U.S. patents and
other intellectual property rights. Use of this
copyright protection technology must be
authorized by Macrovision, and is intended for
home and other limited viewing uses only
unless otherwise authorized by Macrovision.
Reverse engineering or disassembly is
prohibited.
Microsoft and Windows are trademarks of
Microsoft Corporation in the U.S. and other
countries.
HP supports lawful use of technology and does
not endorse or encourage the use of our
products for purposes other than those
permitted by copyright law.
Product notice
This guide describes features that are common
to most models. Some features may not be
available on your computer.
Warranty Print on Demand Statement
You can find the expressly provided HP Limited
Warranty applicable to your product located with
the user guides on your computer and/or on the
CD/DVD provided in the box. In some countries/
regions, HP may provide a printed HP Limited
Warranty in the box. For some countries/regions
where the warranty is not provided in printed
format, you may request a printed copy from
hp.com/go/orderdocuments or write to:
North America: Hewlett-Packard, MS POD,
11311 Chinden Blvd., Boise, ID 83714, USA
Europe, Middle East, Africa: Hewlett-Packard,
POD, Via G. Di Vittorio, 9, 20063 Cernusco s/
Naviglio (MI), Italy
Asia Pacific: Hewlett-Packard, POD, P.O. Box
200, Alexandra Post Office, Singapore 911507
When you request a printed copy of your
warranty, please include your product number,
warranty period (found on your service label),
name, and postal address.
IMPORTANT!Do NOT return your HP product
to the addresses above. For U.S. products, go
to
http://www.hp.com/go/contactHP. For
worldwide support, go to
http://welcome.hp.com/country/us/en/
wwcontact_us.html.
1 Getting information
Type of information Where to find
Set up your computer. Quick Setup (this Guide)
Use the computer.
Connect to the Internet.
Quick Setup (this Guide)
Recover factory settings. Troubleshooting and Maintenance Guide on your computer. Select the HP
Support Assistant app on the Start screen, select My computer, and
then select User guides.
See how-to videos about
using the features of your
computer.
Visit
http://www.hp.com/supportvideos (English only)
Learn how to use the
Microsoft Windows operating
system.
Find Windows password
information.
Find links to driver updates.
Read frequently asked
questions.
Help and Support
From the Start screen, type h, and then select Help and Support. For
U.S. support, go to
http://www.hp.com/go/contactHP. For worldwide
support, go to
http://welcome.hp.com/country/us/en/wwcontact_us.html.
Windows troubleshooting tools
1. From the Start screen, type c, and then select Control Panel.
2. Select System and Security, and then under Action Center, select
Troubleshoot common computer problems.
Troubleshoot the most
common computer hardware
and software issues.
Troubleshooting and Maintenance Guide on your computer. Select the HP
Support Assistant app on the Start screen, select My computer, and
then select User guides.
Find electronic user guides
and specifications for your
computer model.
Order parts and find
additional troubleshooting
help.
HP Support website:
http://www.hp.com/go/contactHP
Upgrade or replace
components of your
computer.
Upgrading and Servicing Guide
HP Support website:
http://www.hp.com/go/contactHP
Find computer warranty
information.
HP Worldwide Limited Warranty and Technical Support included with your
computer.
Select the HP Support Assistant app on the Start screen, select My
computer, and then select User guides.
Get up-to-date information
and help from the Windows
community.
http://www.hp.com/support/consumer-forum
1
Type of information Where to find
Connect to a TV. Watching and Recording TV
Select the HP Support Assistant app on the Start screen, select My
computer, and then select User guides.
If the guide is not available there, visit
http://www.hp.com/go/contactHP.
Maintain your computer. HP Support Assistant — Maintains your computer performance and
resolves problems faster by using automated updates, on-board
diagnostics, and guided assistance.
Select the HP Support Assistant app on the Start screen.
Troubleshooting and Maintenance Guide
Select the HP Support Assistant app on the Start screen, select My
computer, and then select User guides.
Maintaining Your Computer (this Guide)
Find safety and regulatory
notices.
Regulatory, Safety and Environmental Notices
Select the HP Support Assistant app on the Start screen, select My
computer, and then select User guides or visit
http://www.hp.com/go/
contactHP.
Find ergonomic information. Safety & Comfort Guide
Select the HP Support Assistant app on the Start screen, select My
computer, and then select User guides or visit
http://www.hp.com/ergo.
2 Chapter 1 Getting information
2 Setting up your computer
WARNING!
To reduce the risk of electrical shock or damage to your
equipment:
• Place the computer in a location away from water, dust, moisture, and
soot. These can increase the inside temperature, or can cause fire or
electrocution.
• Do not disable the power cord grounding plug. The grounding plug is an
important safety feature.
• Plug the power cord in a grounded (earthed) outlet that is easily
accessible at all times.
• Disconnect power from the equipment by unplugging the power cord
from the electrical outlet. To prevent direct exposure to laser beam, do
not try to open the enclosure of the CD or DVD drives.
• The power supply is preset for the country/region in which you
purchased your computer. If you move, check the voltage requirements
for your new location before plugging the computer into an AC power
outlet.
The computer may be heavy; be sure to use ergonomically correct lifting
procedures when moving the computer.
To reduce the risk of serious injury read the Safety & Comfort Guide. The
guide is located on the web at
http://www.hp.com/ergo.
1. Place the computer so that all ventilation openings are unobstructed
and cabling is not in a walkway or where it can be stepped on or
damaged by placing furniture on it.
2. Connect all power cords from the monitor, computer, and
accessories to a power surge protection device that is specifically
labeled as having surge protection, an uninterruptible power supply
(UPS), or a similar device. If the computer has a television tuner, or
a modem or telephone connection, protect the computer by using
surge protection with these signal inputs as well. Connect the
television cable or the telephone line cord to the surge protection
device, and then connect the device to the computer.
3. Download and install operating system updates.
3
a. Find out what operating system and version your computer is
currently running.
(From the Start screen, type c, select Control Panel, select
System and Security, and then select System. The operating
system and version are shown under Specifications.)
b. Open your internet browser and go to
http://www.hp.com/go/
contactHP.
c. Select your country and language, if necessary, and click
Support & Drivers.
d. Select Download drivers and software (and firmware), type
your computer model name and number in the product field,
and press Enter.
e. If necessary, select your computer model from Product search
results.
f. Select your computer operating system.
g. Click Download next to each update you wish to download.
h. Follow the on-screen instructions to install each downloaded
update.
4. Look in the computer box for additional printed details or updates.
5. Read the Regulatory, Safety and Environmental Notices included
with your computer. Select the HP Support Assistant app on the
Start screen, select My computer, and then select User guides.
6. Read the Safety & Comfort Guide for proper workstation setup,
posture, health and work habits, and electrical and mechanical
safety information. Select the HP Support Assistant app on the
Start screen, select My computer, and then select User guides or
visit
http://www.hp.com/ergo.
After you complete the initial computer setup, you might want to install
additional software programs or hardware devices. Check the operating
system, memory, and other requirements listed before purchasing new
software or hardware for your computer. Follow the software
manufacturer's directions to install the new software.
4 Chapter 2 Setting up your computer
NOTE:
Use only licensed original software. Installing copied software
could result in an unstable installation, infect the computer with a virus, or
be illegal.
Security solutions can deter theft, mishandling, and software attacks, but
cannot prevent them.
Connecting to the Internet
Steps to connect to the Internet:
1. Connect the hardware as shown on the setup view.
2. Get Internet service.
Sign up with an Internet Service Provider (ISP). If you already have
an account with an ISP, skip this step and follow the instructions
provided by the ISP.
3. Using your Internet connection through your ISP, open a web
browser and browse the Internet.
NOTE:
If you have issues connecting to the Internet, see Internet
access on page 15.
Connecting to the Internet
5
3 Setting up additional features
Using Beats Audio™ (select models only)
Your HP TouchSmart PC features audio connectors (headphone and
Audio Out ) that are optimized for Beats Audio™ headphones and
external audio systems (purchased separately). Select HP TouchSmart
PC models also include four Beats-optimized internal speakers and a
Beats toggle button
on the keyboard.
Your computer comes ready for you to experience music with Beats
enabled. To disable Beats, press the Beats toggle button; the Beats off
icon appears on the screen. To turn Beats on, press the Beats toggle
button again. If your keyboard does not contain the Beats toggle button,
press Fn+B to enable and disable Beats. To view the Beats user
interface, from the Start screen, type b, and then select HP Beats Audio.
All you need to do is plug the Beats Audio headphones into the side
headphone connector to experience crisp and clear sound separation. To
experience the full capability of BEATS audio using the internal
speakers, HP recommends connecting a matching HP subwoofer to the
Sub connector on the back panel. If you are using an external audio
system, plug it into the Audio Out connector on the back panel.
6 Chapter 3 Setting up additional features
Using the HDMI port controls (select models only)
The right side of your computer may contain an HDMI port and volume
control buttons. Unless a device is plugged into the HDMI port, the
volume controls have no functionality. The HDMI controls are only
intended to control the settings of the device plugged into that port, and
do not control any other media devices on the system.
To use the HDMI port controls, plug a device into the HDMI port. Press
the menu button (the top button displayed). A new on-screen menu
displays. Using the +/- buttons, select brightness, volume, contrast, or
color balance.
When a device is plugged into the HDMI port, the volume on the
computer is muted. Pressing the +/- buttons on the side panel does not
change the volume of the computer.
Using the HDMI port controls (select models only)
7
4 Maintaining your computer
Cleaning procedures
Keeping your computer system free of dust, dirt, and heat will prolong its life.
Dust, pet hair, and other particles can build up, creating a blanket effect; as a result, components can
overheat or, in the case of the keyboard and mouse, not work smoothly and effectively.
Check your system once a month for visible signs of dust and debris, and clean it about once every three
months.
Visit
www.hp.com/go/contactHP for additional cleaning instructions.
Cleaning the computer
vents
Air vents keep the computer cool. Keep these vents clean by using a small,
battery-powered vacuum cleaner. (A battery-powered vacuum cleaner eliminates
the risk of electric shock.)
1. Vacuum the vents on the computer case.
2. Remove any debris that has accumulated in and around the computer
connectors (for example, the Ethernet and USB connectors).
8 Chapter 4 Maintaining your computer
Cleaning the keyboard and
mouse
When cleaning the keyboard keys, use a low setting on a battery-powered vacuum
cleaner, to avoid removing key caps and springs.
1. Vacuum between the keys of the keyboard and along the grooves.
2. Use a clean, dry cloth and isopropyl (rubbing) alcohol to clean buildup on the
keyboard keys and along its edges.
3. Wipe the body of the mouse and the mouse cord by using cleaning wipes.
If you have a roller-ball mouse, clean the ball and rollers inside:
1. Turn the mouse upside down, and rotate the ball-cover ring counterclockwise
to remove the ring and release the roller ball.
2. Rinse the roller ball with soap and warm water.
3. Clean the rollers inside the mouse with a cotton swab dampened with
isopropyl (rubbing) alcohol.
4. After the roller ball and rollers are completely dry, replace the ball and ball-
cover ring.
Cleaning the screen (AiO
models only)
Follow these steps to clean the screen:
1. Turn off the computer. From the Start screen, move your cursor to the lower-
right corner of the screen to display the charms toolbar, and then select
Settings. Select the Power icon, and then select Shut down.
2. Disconnect the power cord from the wall.
3. Spray a small amount of mild glass cleaner on a soft cloth to clean the
screen.
4. Wipe the surface and left and right side of the screen to remove any dirt,
fingerprints, or other debris.
CAUTION:
Do not spray or place the cleaner directly on the screen; spray the
cleaner into the cloth, and then wipe the sides and surface of the screen.
Do not use an abrasive cleaner or cloth when cleaning the sides or the surface of
the screen, because this could cause damage to the screen.
Cleaning procedures
9
5 Troubleshooting
Refer to the documentation provided by the product manufacturer for
information about peripheral-specific problems, such as issues with a
monitor or a printer. The following tables present some issues you might
encounter while installing, starting up, or using your computer and
possible solutions.
For more information or for additional troubleshooting options, see
Getting information on page 1.
Computer does not start
Symptom Possible solution
Error message:
Hard disk drive
error.
Restart the computer.
1. Press the Ctrl+Alt+Delete keys on the keyboard simultaneously.
2. Select the Power icon, and then select Restart.
Or, press and hold the Power button on the computer for 5 or more seconds to turn off
the computer, and then press the Power button to restart the computer.
3. If Windows opens, immediately back up all important data to a backup hard disk drive.
4. Contact Support, whether it was possible or not to start up Windows.
Either the hard disk drive or the system board may need to be replaced.
Computer will
not turn on or
start.
Ensure that the cables connecting the computer to the external power source are plugged in
properly. When the cables connecting the computer to the external power source are plugged
in properly, and the wall outlet is functioning, the green power supply light on the back of the
computer should be on; if it is not, contact Support.
Test the wall outlet by connecting a different electrical device to it.
10 Chapter 5 Troubleshooting
Symptom Possible solution
Computer
seems to be
locked up and is
not responding.
Use the Task Manager to close any programs not responding, or restart the computer:
1. Press the Ctrl+Alt+Delete keys on the keyboard simultaneously.
2. Select Task Manager.
3. Select the program that is not responding, and then select End task.
If closing programs does not work, restart the computer:
1. Press the Ctrl+Alt+Delete keys on the keyboard simultaneously.
2. Select the Power icon, and then select Restart.
Or, press and hold the Power button on the computer for 5 or more seconds to turn off
the computer, and then press the Power button to restart the computer.
Error message:
Invalid system
disk or Non-
System disk or
Disk error.
When drive activity stops, remove the disc and press the spacebar on the keyboard. The
computer should start up.
Computer does not start
11
Power
Symptom Possible solution
Computer does
not turn off
when the Power
button is
pressed.
Press and hold the Power button until the computer turns off. Check Power Settings.
Computer shuts
down
automatically.
The computer might be in an exceedingly hot environment. Let it cool down.
Ensure that computer air vents are not blocked and that the internal fan is running —
see
Cleaning procedures on page 8. (Your computer might not have an internal fan.)
Display (monitor)
Symptom Possible solution
Screen is blank. Press the space bar on the keyboard or move the mouse to make the screen display
visible again.
Press the Sleep button (select models only), or Esc on the keyboard, to resume from
Sleep mode.
Press the Power button to turn on the computer.
12 Chapter 5 Troubleshooting
Keyboard and mouse (general)
Symptom Possible solution
Keyboard
commands and
typing are not
recognized by the
computer.
Use the mouse to turn off the computer, unplug and reconnect the keyboard to the back
of your computer, and then restart your computer.
Mouse (with cable)
does not work or is
not detected.
Unplug and reconnect the mouse cable to your computer.
If the mouse is still not detected, turn off the computer, unplug and reconnect the mouse
cable, and then restart the computer.
Cursor does not
move using the
arrow keys on the
number keypad.
Press Num Lock on the keyboard to turn off Num Lock, so that the arrow keys on the
number keypad can be used.
Cursor does not
respond to mouse
movement.
Use the keyboard to save changes in all open programs, and then restart your computer:
1. Press the Alt+Tab keys simultaneously to navigate to an open program.
2. Press Ctrl+S simultaneously to save your changes in the selected program (Ctrl+S
is the keyboard shortcut for Save on most—not all—programs).
3. Repeat step 1 and step 2 to save changes in all open programs.
4. After saving changes in all open programs, press the Power button to turn off the
computer.
5. After the shutdown is complete, unplug and reconnect the mouse connector to the
back of your computer, and then restart your computer.
Keyboard and mouse (general)
13
Keyboard and mouse (wireless)
Symptom Possible solution
Wireless keyboard
or mouse does not
work or is not
detected.
Ensure that you are using the wireless keyboard or wireless mouse within range of
the receiver, approximately 3 meters (10 feet) for normal use, and within 30 cm (12
inches) during initial setup or for re-synchronization.
Ensure that the mouse is not in Suspend mode, which occurs after 20 minutes of
inactivity. Click the left mouse button to reactivate it.
Replace the batteries in the keyboard and mouse.
Re-synchronize the keyboard and mouse to the receiver using the following steps.
The receiver, wireless keyboard, and wireless mouse shown in the following illustrations
are examples; your models might vary. IMPORTANT: During these steps, place the
wireless keyboard and wireless mouse on the same level as the receiver, within 30 cm
(12 inches) of the receiver, and away from interference from other devices.
1. Unplug the receiver from a USB connector on the computer, and then reconnect it.
Your computer model might have a connector dedicated to the receiver. If you have
a choice, use a USB connector on the front of the computer.
2. Check that the mouse is on (A), and push and hold the Connect button (B) on the
underside of the mouse for 5 to 10 seconds until the LED on the receiver lights or
stops flashing. The receiver connection session times out after 60 seconds. To
ensure that the connection was established, and that the receiver did not time out
instead, move the mouse and check for response on the screen.
Off
On
Connect
A
B
3. After the mouse connection is established, continue by using the steps that follow to
repeat the procedure for the keyboard.
4. Push and hold the Connect button (C) on the underside of the keyboard for 5 to 10
seconds until the LED on the receiver lights or stops flashing.
C
14 Chapter 5 Troubleshooting
Speakers and sound
Symptom Possible solution
No sound is
produced.
1. From the Start screen, type c, select Control Panel, and then select System and
Security.
2. Under Action Center, select Troubleshoot common computer problems, and
then select Troubleshoot audio playback.
If you are using built-in monitor speakers, use the monitor front-panel Volume button to
adjust volume. Use the front-panel buttons to enter the on-screen display (OSD) and
ensure that audio is enabled and that the volume is set appropriately.
Ensure that you connected powered (active) speakers and that they are turned on.
Turn off your computer, and then unplug and reconnect the speakers. Ensure that the
speakers are connected to an audio connector, not a Line In or headphone connector.
To resume from Sleep mode, press the Sleep button (select models only), or press Esc.
Unplug headphones if they are connected to your computer (or speaker system).
Volume is very low
or unsatisfactory.
Ensure that you connected the speakers to the Audio Out (lime green) connector on the
back of the computer. (Additional audio connectors are used for multiple-channel
speakers.) Detached non-powered speakers (speakers without a separate power source,
such as batteries or a power cord) do not produce satisfactory sound. Replace the non-
powered speakers with powered speakers.
Internet access
Symptom Possible solution
Internet programs
do not start
automatically.
Log in to your ISP, and start the desired program.
Speakers and sound
15
Symptom Possible solution
I cannot connect to
the Internet.
1. From the Start screen, type c, and then select Control Panel.
2. Under Network and Internet, select Connect to the Internet.
Verify that you are using the proper cables for your Internet connection type. Your
computer might have a dial-up modem and an Ethernet network adapter (also called a
network interface card, or NIC). A modem uses a standard telephone cable, whereas the
network adapter uses a network cable, to connect to a local area network (LAN). Do not
connect a telephone cable to the network adapter, and do not plug a network cable into a
telephone service line; doing so might damage the network adapter.
Run the wireless setup wizard:
1. From the Start screen, type c, select Control Panel, select Network and Internet,
and then select Network and Sharing Center.
2. In the Network and Sharing Center window, select Set up a new connection or
network to open the wizard, and then follow the on-screen instructions.
If your system has an external antenna, try to move the antenna to a better position. If the
antenna is internal, try to move the computer.
Try to connect again later, or contact your Internet service provider (ISP) for assistance.
16 Chapter 5 Troubleshooting
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52

HP Pavilion TouchSmart 23-f400 All-in-One Desktop PC series Le manuel du propriétaire

Taper
Le manuel du propriétaire