Samsung LE46A550P1R Manuel utilisateur

Catégorie
Téléviseurs LCD
Taper
Manuel utilisateur

Ce manuel convient également à

Country
Customer Care Centre
Web Site
AUSTRIA 0800-SAMSUNG (726-7864) www.samsung.com/at
BELGIUM 0032 (0)2 201 24 18 www.samsung.com/be
CZECH REPUBLIC
844 000 844 www.samsung.com/cz
Distributor pro Českou republiku:
Samsung Zrt., česka organizační složka Vyskočilova 4, 14000 Praha 4
DENMARK 70 70 19 70 www.samsung.com/dk
EIRE 0818 717 100 www.samsung.com/ie
FINLAND 030-6227 515 www.samsung.com/fi
FRANCE
3260 SAMSUNG (€ 0,15/Min)
08 25 08 65 65 (€ 0,15/Min)
www.samsung.com
GERMANY 01805 - SAMSUNG (726-7864) (€ 0,14/Min) www.samsung.com
HUNGARY 06-80-SAMSUNG (726-7864) www.samsung.com
ITALIA 800-SAMSUNG (726-7864) www.samsung.com
LUXEMBURG 0035 (0)2 261 03 710 www.samsung.com/be
NETHERLANDS 0900-SAMSUNG (726-7864) (€ 0,10/Min) www.samsung.com/nl
NORWAY 815-56 480 www.samsung.com/no
POLAND
0 801 801 881
022-607-93-33
www.samsung.com/pl
PORTUGAL 80820-SAMSUNG (726-7864) www.samsung.com/pt
SLOVAKIA 0800-SAMSUNG (726-7864) www.samsung.com/sk
SPAIN 902 10 11 30 www.samsung.com
SWEDEN 0771-400 200 www.samsung.com/se
SWITZERLAND 0800-SAMSUNG (726-7864) www.samsung.com/ch
U.K 0845 SAMSUNG (7267864) www.samsung.com
TURKEY 444 77 11 www.samsung.com
ESTONIA 800-7267 www.samsung.ee
LATVIA 800-7267 www.samsung.com/lv
LITHUANIA 8-800-77777 www.samsung.lt
KAZAHSTAN 8-10-800-500-55-500 www.samsung.kz
KYRGYZSTAN 00-800-500-55-500 -
RUSSIA 8-800-555-55-55 www.samsung.ru
TADJIKISTAN 8-10-800-500-55-500 -
UKRAINE 8-800-502-0000 www.samsung.com
UZBEKISTAN 8-10-800-500-55-500 www.samsung.uz
LCD TV
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at
www.samsung.com/global/register
Model Serial No.
BN68-01410F-01
Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products,
please contact the SAMSUNG customer care centre.
BN68-01410F-01-Cover.indd 1 2008-06-02 ¿ÀÀü 2:20:02
© 2008 Samsung Electronics Co., Ltd. All rights reserved.
Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG
customer care centre. (See back cover for more informations.)
Precautions When Displaying a Still Image
A still image may cause permanent damage to the TV screen.
Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image
retention. This image retention is also known as "screen burn". To avoid such image retention, reduce the
degree of brightness and contrast of the screen when displaying a still image.
W
atching the LCD TV in 4:3 format for a long period of time may leave traces of borders
displayed on the left, right and center of the screen caused by the difference of light emission on
the screen. Playing a DVD or a game console may cause a similar effect to the screen. Damages
caused by the above effect are not covered by the Warranty.
Displaying still images from Video games and PC for longer than a certain period of time may produce
partial after-images.
To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.
BN68-01410F-01Eng-0529.indd 1 2008-05-30 ¿ÀÀü 9:22:48
Contents
CONNECTING AND PREPARING YOUR TV
List of Parts ........................................................ 2
Installing the Stand ............................................. 2
Installing the Wall Mount Kit ............................... 2
Viewing the Control Panel .................................. 3
Viewing the Connection Panel ........................... 4
Viewing the Remote Control ............................... 6
Installing Batteries in the Remote Control .......... 7
Switching On and Off ......................................... 7
Placing Your Television in Standby Mode........... 7
Viewing the Menus ............................................. 8
Using the TOOLS Button .................................... 8
Plug & Play ......................................................... 9
SETTING THE CHANNELS
Storing Channels Automatically ....................... 10
Storing Channels Manually ...............................11
Adding / Locking Channels .............................. 12
Sorting the Stored Channels ............................ 13
Assigning Channels Names ............................. 13
Fine Tuning Channel Reception ....................... 14
LNA (Low Noise Amplier) ............................... 14
SETTING THE PICTURE
Changing the Picture Standard ........................ 15
Adjusting the Custom Picture ........................... 16
Conguring Detailed Settings on the Picture ... 16
Resetting the Picture Settings to the Factory
Defaults ............................................................ 17
Conguring Picture Option ............................... 18
Viewing the Picture In Picture (PIP) ................. 20
SETTING THE SOUND
Sound Features ................................................ 21
Selecting the Sound Mode ............................... 22
Connecting Headphones (Sold separately) ..... 22
SETTING THE TIME
Setting and Displaying the Current Time .......... 23
Setting the Sleep Timer .................................... 23
Switching the Television On and Off
Automatically .................................................... 24
FUNCTION DESCRIPTION
Choosing Your Language ................................. 24
Setting the Light Effect
(depending on the model) ................................ 25
Melody / Entertainment / Energy Saving ......... 25
Selecting the Source ........................................ 27
Editing the Input Source Names ...................... 27
SETTING THE PC
Setting up Your PC Software
(Based on Windows XP) .................................. 28
Display Modes .................................................. 28
Setting up the TV with your PC ........................ 29
WISELINK
Using the WISELINK Function ......................... 30
Using the WISELINK Menu .............................. 31
Using the PHOTO (JPEG) List ......................... 32
Using the MP3 List ........................................... 35
Using the Setup Menu ...................................... 36
ABOUT ANYNET
+
What is Anynet+? ............................................ 37
Connecting Anynet+ Devices ........................... 37
Setting Up Anynet+ .......................................... 38
Scanning and Switching between Anynet+
Devices ............................................................ 39
Recording ......................................................... 41
Listening through a Receiver ........................... 41
Check Points before Requesting Service ......... 42
RECOMMENDATIONS FOR USE
Teletext Feature ............................................... 43
Auto Wall-Mount (Sold separately) ................... 45
Using the Anti-Theft Kensington Lock
(depending on the model) ................................ 46
Troubleshooting: Before Contacting Service
Personnel ......................................................... 47
Technical and Environmental Specications ... 48
English - 1
Symbol Press Note One-Touch
Button
English
BN68-01410F-01Eng-0529.indd 1 2008-05-30 ¿ÀÀü 9:22:49
English - 2
List of Parts
Please make sure the following items are included with your LCD TV.
If any items are missing, contact your dealer.
Remote Control
& Batteries
(AAA x 2)
Power Cord Cover-Bottom
Stand Screw
X 4
Stand Cleaning Cloth
Warranty card / Safety Guide / Registration Cards (Not available in all locations)
The stand and stand screw may not be included depending on the model.
M4 X L16
Owners Instructions
Warranty card
Safety Guide
Registration Cards
Installing the Wall Mount Kit
Wall mount items (sold separately) allow you to mount
the TV on the wall.
For detailed information on installing the wall mount,
see the instructions provided with the Wall Mount items.
Contact a technician for assistance when installing the
wall mounted bracket.
Samsung Electronics is not responsible for any damage
to the product or injury to yourself or others if you elect to
install the TV on your own.
Do not install your Wall Mount Kit while your TV is
turned on. It may result in personal injury due to
electric shock.
Remove the stand and cover the bottom hole with a
cap and fasten with two screws.
Installing the Stand
1. Connect your LCD TV and the stand.
Two or more people should carry the TV.
Make sure to distinguish between the front and back of the stand when assembling them.
2
. Fasten two screws at position 1 and then fasten two screw at position 2.
Stand the product up and fasten the screws. If you fasten the screws with the LCD TV placed
down, it may lean to one side.
The stand is installed for models with the screen size of 37 inch and above.
1
2
BN68-01410F-01Eng-0529.indd 2 2008-05-30 ¿ÀÀü 9:22:50
English - 3
Viewing the Control Panel
The product colour and shape may vary depending on the model.
1
SOURCE
Toggles between all the available input sources
(TV, Ext.1, Ext.2, AV, S-Video, Component, PC,
HDMI1, HDMI2, HDMI3). In the on-screen menu,
use this button as you use the
ENTER
button
on the remote control.
5
Power Indicator
Blinks and turns off when the power is on and
lights up in stand-by mode.
6
(Power)
Press to turn the TV on and off.
7
Remote Control Sensor
Aim the remote control towards this spot on
the TV.
8
Speakers
2
MENU
Press to see an on-screen menu of your
TV’s
features.
3
Press to decrease or increase the volume. In the
on-screen menu, use the buttons as you
use the ◄ and ► buttons on the remote control.
4
Press to change channels.
In the on-screen menu, use the
buttons as you use the
and
buttons on
the remote control.
(Without the Remote Control, you can turn on
the TV by using the Channel buttons.)
Front Panel buttons
Touch each button to
operate.
Side Panel buttons
8 8
4
1
2
3
5
6
7
1
2
3
4
6
7
58
8
BN68-01410F-01Eng-0529.indd 3 2008-05-30 ¿ÀÀü 9:22:51
English - 4
Viewing the Connection Panel
Whenever you connect an external device to your TV, make sure that power on the unit is turned off
When connecting an external device, match the colour of the connection terminal to the cable.
1 PC IN [PC] / [AUDIO]
Connect to the video and audio output jack on your PC.
2 COMPONEN
T IN
Connect component video cables (optional) to component connector ("P
R", "PB", "Y") on the rear of
your set and the other ends to corresponding component video out connectors on the DVD.
If you wish to connect both the Set-Top Box and DVD, you should connect the Set-Top Box to the
DVD and connect the DVD to component connector ("P
R", "PB", "Y") on your set.
The P
R, PB and Y connectors on your component devices (DVD) are sometimes labeled Y, B-Y and
R-Y or Y, Cb and Cr.
Connect RCA audio cables (optional) to "R - AUDIO - L" on the rear of your set and the other ends to
corresponding audio out connectors on the DVD.
3
HDMI IN 1, HDMI IN 2, HDMI IN 3
Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD players)
No additional Audio connection is needed for an HDMI to HDMI connection.
When using an HDMI/DVI cable connection, you must use the HDMI IN 2 jack.
What is HDMI?
“High Denition Multimedia interface” allows the transmission of high denition digital video data
and multiple channels of digital audio.
The HDMI/DVI terminal supports DVI connection to an extended device with the appropriate
cable (not supplied). The difference between HDMI and DVI is that the HDMI device is smaller
in size, has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed, and
supports multi - channel digital audio.
-
-
-
-
-
-
-
-
-
-
3
The product colour and shape may vary depending on the model.
Power Input
[Side Panel Jacks]
1 2 3 4 5
6
7
8
0
!
9
BN68-01410F-01Eng-0529.indd 4 2008-05-30 ¿ÀÀü 9:22:51
English - 5
The TV may not output sound and pictures may be displayed with abnormal colour when DVD
players/Cable Boxes/Satellite receivers supporting HDMI versions older than 1.3 are connected.
When connecting an older HDMI cable and there is no sound, connect the HDMI cable to the
HDMI IN 2 jack and the audio cables to the DVI IN (HDMI2) [R-AUDIO-L] jacks on the back of
the TV. If this happens, contact the company that provided the DVD player/Cable Box/Satellite
receiver to conrm the HDMI version, then request a rmware update. HDMI cables that are not
1.3 may cause annoying icker or no screen display.
DVI IN(HDMI2) [R-AUDIO-L]
DVI audio outputs for external devices.
Supported modes for HDMI/DVI and Component
4 AN
T IN
To view television channels correctly, a signal must be received by the set from one of the following
sources:
An outdoor aerial / A cable television network / A satellite network
5 SER
VICE
Connect this to the jack on the optional wall mount bracket. This will allow you to adjust the TV viewing
angle using your remote control.
6
WISELINK
Connect a USB mass storage device to view photo les (JPEG) and play audio les (MP3)
7 S-VIDEO or VIDEO / R-AUDIO-L
Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or
Camcorder.
Connect RCA audio cables to "R-AUDIO-L" on your set and the other ends to corresponding audio
out connectors on the A/V device.
8
Headphones jack
Headphone may be connected to the headphone output on your set. While the head phone is
connected, the sound from the built-in speakers will be disabled.
9 AUDIO OUT [R-AUDIO-L]
Connect RCA audio cables to AUDIO OUT [R-AUDIO-L] on the rear of your set and the other ends to
corresponding audio in connectors on the Amplier or DVD Home Theatre.
0 EXT 1, EXT 2
Connector
Input Output
Video Audio (L/R) RGB Video + Audio (L/R)
EXT 1 O O O Only TV output is available.
EXT 2 O O Output you can choose.
Inputs or outputs for external devices, such as VCR, DVD, video game device or video disc players.
! Kensington Lock (depending on the model)
The Kensington lock (optional) is a device used to physically x the system when used in a public
place.
If you want to use a locking device, contact the dealer where you purchased the TV.
The location of the kensington lock may be different depending on its model.
-
-
-
-
-
-
-
-
-
-
-
480i 480p 576i 576p 720p 1080i 1080p
HDMI/DVI 50Hz X X X O O O O
HDMI/DVI 60Hz X O X X O O O
Component O O O O O O O
BN68-01410F-01Eng-0529.indd 5 2008-05-30 ¿ÀÀü 9:22:52
English - 6
Viewing the Remote Control
1 Television Standby button
2
Selects the TV mode
directly
3 Number buttons for direct
channel access
4 One/T
wo-digit channel
selection
5
+: Volume increase
-: Volume decrease
6 T
emporary sound switch-
off
7 It display "Channel List"
on the screen.
8 Use to quickly select
frequently used functions.
9 Use to see information on
the current broadcast
0
Colour buttons :
Use these buttons in
the Channel list and
WISELINK, etc.
@ Press to select the optional
display and sound modes
for sports, cinema and
games.
#
Use these buttons in the
DMA, WISELINK, and
Anynet+.
( : This remote can be
used to control recording
on Samsung recorders
with the Anynet
+
feature)
$
Available source selection
% Previous channel
^ P
<: Next channel
P
>: Previous channel
& Displays the main on-
screen menu
*
This function enables you
to view and play photo
and music files from an
external device.
( Returns to the previous
menu
) Control the cursor in the
menu
a Exit the on-screen menu
b Use this when connecting
a SAMSUNG DMA
(Digital Media Adapter)
device through an HDMI
interface and switching
to DMA mode. (The DMA
button is optional.) For
more information on the
operating procedures,
refer to the user manual
of the DMA. This button
is available when
“Anynet
+
(HDMI-CEC)" is
“On” (see page 38)
c Picture size selection
d Selects the HDMI mode
directly.
e Picture effect selection
Teletext Functions
2
Exit from the teletext display
7
Teletext store
8
Teletext size selection
9
Teletext reveal
0
Fastext topic selection
!
Alternately select Teletext,
Double, or Mix.
$ Teletext mode selection
(LIST/FLOF)
%
Teletext sub page
^
P
<: Teletext next page
P
>: Teletext previous page
& Teletext index
(
Teletext hold
a
Teletext cancel
The performance of the remote control may be affected by bright light.
BN68-01410F-01Eng-0529.indd 6 2008-05-30 ¿ÀÀü 9:22:52
English - 7
Installing Batteries in the Remote Control
1. Lift the cover at the back of the remote control upward as shown in the
gure.
2. Install two AAA size batteries.
Make sure to match the "+" and "–" ends of the batteries with the
diagram inside the compartment.
3
. Replace the cover.
Remove the batteries and store them in a cool, dry place if you won’t be
using the remote control for a long time.
If the remote control doesn’t work, check the following:
1. Is the TV power on?
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power outage, or is the power cord unplugged?
5. Is there a special uorescent light or neon sign nearby?
Switching On and Off
The mains lead is attached to the rear of your set.
1. Plug the mains lead into an appropriate socket.
The standby indicator lights up
on your set.
2. Press the P button
on your set.
You also can press the POWER button or the TV button on the remote control to turn the TV
on.
The programme that you were watching last is reselected automatically.
3
. Press the numeric button (0~9) or channel up/down (
</>) button on the remote control or
button
on your set.
When you switch the set on for the very rst time, you will be asked to choose language in which the
menus are to be displayed.
4. To switch your set off, press the POWER button again.
Placing Your Television in Standby Mode
Your set can be placed in standby mode in order to reduce the power consumption. The standby
mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).
1. Press the POWER
button on the remote control.
The screen is turned off and a red standby indicator appears on your set.
2
. To switch your set back on, simply press the POWER
, numeric buttons (0~9), TV button or channel
up/down (</>) button again.
Do not leave your set in standby mode for long periods of time (when you are away on holiday, for
example).
It is best to unplug the set from the mains and aerial.
BN68-01410F-01Eng-0529.indd 7 2008-05-30 ¿ÀÀü 9:22:53
English - 8
Viewing the Menus
1. With the power on, press the MENU button.
The main menu appears on the screen. The menu’ s left side has
icons: Picture, Sound, Channel, Setup, Input.
2
. Press the ▲ or ▼ button to select one of the icons.
Then press the
ENTER
button to access the icon’s sub-menu.
3. Press the EXIT button to exit.
The on-screen menus disappear from the screen after about
one minute.
Using the TOOLS Button
You can use the TOOLS button to select your frequently
used functions quickly and easily. The “Tools” menu change
depending on which external input mode you are viewing.
1. Press the TOOLS button.
The “Tools” menu will appear.
2
. Press the ▲ or ▼ button to select a menu.
3. Press the ▲/▼/◄/►/
ENTER
buttons to display, change, or
use the selected items. For a more detailed description of each
function, refer to the corresponding page.
Anynet+ (HDMI-CEC), see page 38
Picture Mode, see page 15
Sound Mode, see page 21
Sleep Timer, see page 23
SRS TS XT, see page 21
Energy Saving, see page 26
Dual l-ll, see page 22
PIP, see page 20
Auto Adjustment, see page 29
Tools
Anynet+ (HDMI-CEC)
Picture Mode : Standard
Sound Mode : Custom
Sleep Timer : Off
SRS TS XT : Off
Energy Saving : Off
Dual l-ll : Mono
Move Enter Exit
Picture
Mode : Standard
B
acklight 7
Contrast 95
Brightness 45
Sharpness
50
Colour
50
Tint G50 R50
Detailed Settings
sMore
TV
Move Enter Return
BN68-01410F-01Eng-0529.indd 8 2008-05-30 ¿ÀÀü 9:22:54
English - 9
Plug & Play
When the TV is initially powered on, several basic settings
proceed automatically and subsequently. The following
settings are available.
1. Press the POWER
button on the remote control.
The message "Запуск Plug & Play" is displayed with "OK"
selected.
2. Select the appropriate language by pressing the
or
button.
Press the
ENTER
button to conrm your choice.
3. Press the
or
button to select “Store Demo” or “Home Use”, then the
ENTER
button.
We recommend setting the TV to "Home Use" mode for the best picture in your home
environment.
"Store Demo" mode is only intended for use in retail environments.
If the unit is accidentally set to “Store Demo” mode and you want to return to “Home Use”
(Standard): Press the Volume button on the TV. When the volume OSD is displayed, press and
hold the MENU button on the TV for 5 seconds.
4. The message "Check antenna input." is displayed with "OK" selected.
Press
the
ENTER
button.
Please check that the antenna cable is connected correctly.
5. Select the appropriate country by pressing the
or
button.
Press the
ENTER
button to conrm your choice.
6.
The "Auto Store" menu is displayed with the "Start" selected. Press the
ENTER
button.
The channel search will start and end automatically.
Press the
ENTER
button at any time to interrupt the memorization process.
After all the available channels are stored, the "Clock Set" menu appears.
7. Press the
ENTER
button.
Select the "Month", "Day", "Year", "Hour", or "Minute" by pressing the
or
button.
Set the "Month", "Day", "Year", "Hour", or "Minute" by pressing the
or
button.
You can also set the “Month”, “Day”, “Year”, “Hour” and "Minute" by pressing the number buttons
on the remote control.
8. Press
the
ENTER
button to conrm your setting. The message “Enjoy your viewing” is displayed.
When you have nished, press the
ENTER
button.
Even if the
ENTER
button is not pressed, the message will automatically disappear after
several seconds.
Language: Select your language.
Country: Select your country.
Auto Store: Automatically scans for and stores channels available in the local area.
Clock Set: Sets the current time for the TV clock.
Plug & Play
Запуск Plug & Play
Вход
OK
BN68-01410F-01Eng-0530.indd 9 2008-05-30 ¿ÀÈÄ 4:51:07
English - 10
If you want to reset this feature...
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the
ENTER
button.
2. Press the
ENTER
button again, to select "Plug & Play".
For further details on setting up options, refer to the page 9.
The “Plug & Play” feature is only available in the TV mode.
Storing Channels Automatically
Storing Channels Manually
-
-
Enter Return
Plug & Play
Start Plug & Play.
Enter
Return
OK
TV
Setup
Plug & Play
Language
: English
Time
Light Effect
:
In Watching TV
Auto Wall-Mount
Melody : Off
Entertainment
: Off
Energy Saving
: Off
PIP
Move Enter Return
TV
Channel
Country
:
United Kingdom
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine
Tune
LNA : Off
Move Enter Return
Storing Channels Automatically
You can scan for the frequency ranges available to you (and availability depends on your country).
Automatically allocated programme numbers may not correspond to actual or desired programme
numbers. However, you can sort numbers manually and clear any channels you do not wish to
watch.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the
ENTER
button.
2. Press the
ENTER
button to select "Country".
3. Select the appropriate country by pressing the ▲ or ▼ button.
Press the
ENTER
button to conrm your choice.
4. Press the ▲ or ▼ button to select "Auto Store", then press the
ENTER
button.
5. Press the
ENTER
button.
The TV will begin memorizing all of the available channels.
Press the
ENTER
button at any time to interrupt the memorization process and return to the
"Channel" menu.
6. After all the available channels are stored, the "Sort" menu appears. (refer to page 13)
BN68-01410F-01Eng-0529.indd 10 2008-05-30 ¿ÀÀü 9:22:56
English - 11
Storing Channels Manually
You can store television channels, including those received via
cable networks.
When storing channels manually, you can choose:
Whether or not to store each of the channels found.
The programme number of each stored channel which you wish
to identify.
1.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the
ENTER
button.
2. Press the ▲ or ▼ button to select "Manual Store", then press
the
ENTER
button.
3. Select the required option by pressing the ▲ or ▼ button, then
press the
ENTER
button.
4. When you are satised with your setting, press the
ENTER
button.
5. Press the EXIT button to exit.
Programme (Programme number to be assigned to a channel)
Press the ▲ or ▼ button until you nd the correct number.
You can also select the channel number directly by pressing the numeric buttons (0~9).
Colour System:
Auto/PAL/SECAM/NTSC4.43
Press the ▲ or ▼ button to select the required colour standard.
Sound System:
BG/DK/I/L
Press the ▲ or ▼ button to select the required sound standard.
Channel (When you know the number of the channel to be stored)
Press the ▲ or ▼ button to select C (Air channel) or S (Cable channel).
Press the ► button, then press the ▲ or ▼ button to select the required number.
You can also select the channel number directly by pressing the numeric buttons (0~9).
If there is abnormal sound or no sound, re-select the sound standard required.
Search (When you do not know the channel numbers)
Press the ▲ or ▼ button to start the search.
The tuner scans the frequency range until the rst channel or the channel that you selected is
received on the screen.
Store (When you store the channel and associated programme number)
Set to "OK" by pressing the
ENTER
button.
Channel mode
P (Programme mode): When completing tuning, the broadcasting stations in your area have been
assigned to position numbers from P00 to P99. You can select a channel by entering the position
number in this mode.
C (Air channel mode): You can select a channel by entering the assigned number to each air
broadcasting station in this mode.
S (Cable channel mode): You can select a channel by entering the assigned number for each cable
channel in this mode.
-
-
-
-
-
-
-
-
-
-
-
Move Enter Return
Manual Store
Programme : P 2
Colour System : Auto
Sound System
: BG
Channel : C 3
Search : 77 MHz
Store : ?
Move Enter Return
TV
Channel
Country :
United Kingdom
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
LNA : Off
T
V
Move Enter Return
BN68-01410F-01Eng-0529.indd 11 2008-05-30 ¿ÀÀü 9:22:56
English - 12
Adding / Locking Channels
Using the Channel Manager, you can conveniently lock or add
channels.
1. Press the MENU button to display the menu.
Press the or button to select "Channel", then press the
ENTER
button.
2. Press the or button to select "Channel Manager", then
press the
ENTER
button.
Adding channels
Using
the Channel List, you can add channels.
3. Select Channel List by pressing the
ENTER
button.
4. Move to the (
) eld by pressing the ▲, ▼, ◄ or ►
button, select a channel to be added, and press the
ENTER
button to add the channel.
If you press the
ENTER
button again, the ( ) symbol
next to the channel disappears and the channel is not
added.
” is active when "Child Lock" is selected to "On".
Locking channels
This feature allows you to prevent unauthorized users, such as
children, from watching unsuitable programmes by muting out
video and audio.
5. Press the ▲ or ▼ button to select "Child Lock", then press the
ENTER
button.
6. Select "On" by pressing the ▲ or ▼ button, then press the
ENTER
button.
7. Press the ▲ or ▼ button to select "Channel List", then press
the
ENTER
button.
8. Move to the (
) eld by pressing the ▲, ▼, ◄ or ► button,
select a channel to be locked, and press the
ENTER
button.
If you press the
ENTER
button again, the ( ) symbol
next to the channel disappears and the channel lock is
cancelled.
A blue screen is displayed when "Child Lock" is activated.
9. Press the EXI
T button to exit.
Select "On" or "Off" in "Child Lock" to easily turn the channels which selected on "
" to be active
or inactive.
You can select these options by simply pressing the CH LIST
button on the remote control
P 1 C3
Channel List
Move
Enter
Page Return
Add Lock
1 / 10
Prog.
0 C--
1 C
3
2 BBC 1
3 C74
4 C75
5 C76
6 S3
7 S4
8 S6
9 S7
Channel
Country :
United Kingdom
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
LNA : Off
Move Enter Return
TV
TV
Channel Manager
Channel List
Child Lock
: Off
Move Enter Return
BN68-01410F-01Eng-0529.indd 12 2008-05-30 ¿ÀÀü 9:22:57
English - 13
Sorting the Stored Channels
This operation allows you to change the programme numbers
of the stored channels.
This operation may be necessary after using the auto store.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the
ENTER
button.
2. Press the ▲ or ▼ button to select "Sort", then press the
ENTER
button.
3. Select the channel number that you wish to change by
pressing the ▲ or ▼ button.
Press the
ENTER
button.
The selected channel number and name are moved to right
side.
4
. Select the number of the programme to which the channel is to
be moved by pressing the ▲ or ▼ button.
5
. Press the
ENTER
button. The channel is moved to its new
position and all other channels are shifted accordingly.
6. Repeat steps 3 to 5 for another channel to be sorted.
7
. Press the EXIT button to exit.
Assigning Channels Names
Channel names will be assigned automatically when channel
information is broadcast. These names can be changed,
allowing you to assign new names.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the
ENTER
button.
2. Press the ▲ or ▼ button to select "Name", then press the
ENTER
button.
3. If necessary, select the channel to be assigned to a new
name by pressing the ▲ or ▼ button. Press the
ENTER
button
The selection bar is displayed around the name box.
4
.
To... Then...
Select a letter, number or symbol Press the ▲ or ▼ button
Move on the next letter Press the ► button
Move back the previous letter Press the ◄ button
Conrm the name
Press the
ENTER
button
The following characters are available: Letters of the alphabet (A~Z) / Numbers (0~9) / Special
characters (+, -, *, /, space)
5
. Repeat steps 3 to 4 for each channel to be assigned to a new name.
6
. Press the EXIT button to exit.
Sort
Prog. Ch. Name
0
C--
1 C23
2 C1
6
3 C3
4 S1
s
TV
Move Enter Return
Channel
Country :
United Kingdom
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine
Tune
LNA : Off
TV
Move Enter Return
Name
Move Enter Return
Prog. Ch. Name
0
C-- -----
1 C
23 -----
2 C1
6 -----
3 C3 -----
4 S1
-----
s
T
V
Channel
Country :
United Kingdom
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
LNA : Off
Move Enter Return
TV
BN68-01410F-01Eng-0529.indd 13 2008-05-30 ¿ÀÀü 9:22:59
English - 14
Channel
Fine Tuning Channel Reception
Use fine tuning to manually adjust a particular channel for
optimal reception.
1. Use the number buttons to directly select the channel that
you want to ne tune.
2. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the
ENTER
button.
3. Press the ▲ or ▼ button to select "Fine
Tune", then press
the
ENTER
button.
4. Press the ◄ or ► button to adjust the ne tuning.
Press the
ENTER
button.
5. Press the EXIT button to exit.
Fine tuned channels that have been saved are marked with
an asterisk "*" on the right-hand side of the channel number
in the channel banner. And the channel number turns red.
To reset the ne-tuning, select "Reset" by pressing the ▲ or ▼
button and then press the
ENTER
button.
LNA (Low Noise Amplier)
If the TV is operating in a weak-signal area, the LNA function
can improve the reception (a low-noise preamplier boosts the
incoming signal).
Not available in DTV or external input mode.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the
ENTER
button.
2. Press the ▲ or ▼ button to select "LNA", then press the
ENTER
button.
3. Press the ▲ or ▼ button to select "Off" or "On". Press the
ENTER
button.
4. Press the EXIT button to exit.
Channel
Country :
United Kingdom
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine
Tune
LNA : Off
TV
Move Enter Return
Fine Tune
P 1
0
Reset
Adjust Save Return
Channel
Country :
United Kingdom
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
LNA : Off
TV
Move Enter Return
Channel
Country :
United Kingdom
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
LNA : Off
TV
Move Enter Return
Off
On
BN68-01410F-01Eng-0529.indd 14 2008-05-30 ¿ÀÀü 9:23:00
English - 15
Changing the Picture Standard
You can select the type of picture which best corresponds to
your viewing requirements.
1. Press the MENU button to display the menu.
Press the
ENTER
button, to select "Picture".
2. Press the
ENTER
button again, to select "Mode".
3. Press the ▲ or ▼ button to select the desired picture effect.
Press the
ENTER
button.
4. Press the EXIT button to exit.
Dynamic: Selects the picture for high-definition in a bright
room.
Standard: Selects the picture for optimum display in a
normal environment.
Movie: Selects the picture for comfortable display in a dark
room.
The Picture mode must be adjusted separately for each
input source.
You can also press the P.MODE button on the remote control to
select one of the picture settings.
Easy Setting
1. Press
the TOOLS button on the remote control.
2. Press the ▲ or ▼ button to select “Picture Mode”.
3. Press the ◄ or ► button to select the desired picture mode.
4. Press the EXIT
or TOOLS button to exit.
Picture
Mode :
Standard
Backlight 7
Contrast
95
Brightness 45
Sharpness
50
Colour
50
Tint G50 R50
Detailed Settings
sMore
T
V
Move Enter Return
Dynamic
Standard
Movie
Picture
Mode : Standard
B
acklight 7
Contrast 95
Brightness 45
Sharpness
50
Colour
50
Tint G50 R50
Detailed Settings
sMore
TV
Move Enter Return
Tools
Anynet+ (HDMI-CEC)
Picture Mode Standard
Sound Mode
: Custom
Sleep Timer : Off
SRS TS XT : Off
Energy Saving : Off
Dual l-ll : Mono
Move Adjust Exit
BN68-01410F-01Eng-0529.indd 15 2008-05-30 ¿ÀÀü 9:23:00
English - 16
Adjusting the Custom Picture
Your set has several settings which allow you to control picture
quality.
1. T
o select the desired picture effect, follow the
"Changing the Picture Standard" instructions number 1 to 3.
2. Press the ▲ or ▼ button to select a particular item. Press the
ENTER
button.
3. Press the ◄ or ► button to decrease or increase the value of a
particular item. Press the
ENTER
button.
4. Press the EXIT button to exit.
Backlight: Adjusts the screen brightness by adjusting the LCD
backlight brightness. (0~10)
Contrast: Adjusts the lightness and darkness between objects
and the background.
B
rightness: Adjusts the brightness of the whole screen.
Sharpness: Adjusts the outline of objects to either sharpen them
or make them more dull.
Colour: Adjusts the colours, making them lighter or darker.
Tint: Adjusts the colour of objects, making them more red or
green for a more natural look.
The adjusted values are stored according to the selected Picture mode.
In PC mode, you can only make changes to "Backlight”, “Contrast" and “Brightness”.
TV, Ext., AV, S-Video modes of the PAL system, you cannot use the "Tint" Function.
You can return to the factory defaults picture settings by selecting the "Reset".
(Refer to "Resetting the Picture Settings to the Factory Defaults" on page 17)
The energy consumed during use can be signicantly reduced if the level of brightness of the picture
is reduced, and that this will reduce the overall running cost.
Conguring Detailed Settings on the Picture
You can set detailed picture settings.
1. Press the MENU button to display the menu.
Press the
ENTER
button, to select "Picture".
2. Press the
ENTER
button to select “Mode”.
Press the ▲ or ▼ button to select “Standard” or “Movie”, then
press the
ENTER
button.
3. Press the ▲ or ▼ button to select "Detailed Settings", then press
the
ENTER
button.
4. Select the required option by pressing the ▲ or ▼ button, then
press the
ENTER
button.
5. When you are satised with your setting, press the
ENTER
button.
6. Press the EXI
T button to exit.
"Detailed Settings" is available in "Standard" or "Movie" mode.
In PC mode, you can only make changes to “Dynamic Contrast”,
“Gamma” and “White Balance” from among the “Detailed
Settings” items.
B
lack Adjust: Off/Low/Medium/High
You can directly select the black level on the screen to adjust the screen depth.
Dynamic Contrast: Off/Low/Medium/
High
You can adjust the screen contrast so that the optimal contrast is provided.
7
Backlight
Move Adjust Return
Picture
Mode : Standard
B
acklight 7
Contrast 95
Brightness 45
Sharpness
50
Colour
50
Tint G50 R50
Detailed Settings
sMore
TV
Move Enter Return
Detailed Settings
Black Adjust : Off
Dynamic Contrast
: Medium
Gamma : 0
Colour Space : Custom
White Balance
Flesh
Tone : 0
Edge Enhancement
: On
xvYCC
: Off
Move Enter Return
TV
Picture
Mode : Standard
B
acklight 7
Contrast 95
Brightness 45
Sharpness
50
Colour
50
Tint G50 R50
Detailed Settings
sMore
TV
Move Enter Return
BN68-01410F-01Eng-0529.indd 16 2008-05-30 ¿ÀÀü 9:23:02
English - 17
Gamma: -3 ~ +3
You can adjust the Primary Colour (Red, Green, Blue) Intensity.
Press the ◄ or ► button until you reach the optimal setting.
Colour Space: Auto/Native/Custom
Colour space is a Colour matrix composed of “Red”, “Green” and “Blue” Colours.
Select your favourite Colour space to experience the most natural Colour.
Auto: Auto Color Space automatically adjusts to the most natural color tone based on program
sources.
Native: Native Color Space offers deep and rich color tone.
Custom: Adjusts the color range to suit your preference.
Customizing the Colour Space
Colour:
Red/Green/Blue/Yellow/Cyan/Magenta
Adjusts the Colour range to suit your preference.
“Colour” is available when “Colour Space” is set to “Custom”.
Press the ▲ or ▼ button to select “Red”, “Green”, “Blue”, “Yellow”, “Cyan” or “Magenta”.
Press the EN
TER button.
Red/Green/Blue: In “Colour”, you can adjust the RGB values for the selected colour.
Press the ▲ or ▼ button to select "Red", "Green" or "Blue" to change it.
Press the EN
TER button.
Press the ◄ or ► button to decrease or increase the value of a particular item. Press the
EN
TER button.
Reset: Resets the colour space to the default values.
White
Balance: R-Offset/G-Offset/B-Offset/R-Gain/G-Gain/B-Gain/Reset
You can adjust the colour temperature for more natural picture colours.
R-Offset/G-Offset/
B-Offset/R-Gain/G-Gain/B-Gain: Changing the adjustment value will refresh the
adjusted screen.
Select the required option by pressing the ▲ or ▼ button, then press the
ENTER
button.
Press the ◄ or ► button until you reach the optimal setting.
Reset: The previously adjusted white balance will be reset to the factory defaults.
Flesh
Tone: -15 ~ +15
You can emphasize the pink 'flesh tone' in the picture.
Press the ◄ or ► button until you reach the optimal setting.
Changing the adjustment value will refresh the adjusted screen.
Edge Enhancement: Off/On
You can emphasize object boundaries in the picture.
xvYCC: Off/On
Setting the xvYCC mode to On increases detail and colour space when watching movies from an
external device (ie. DVD player) connected to the HDMI or Component IN jacks. You must set the
Picture Mode to Movie to enjoy this feature.
Only available in "HDMI" and "Component" on "Movie" mode.
If xvYCC function is active, PIP cannot be selected.
Resetting the Picture Settings to the Factory Defaults
You can return to the factory defaults picture settings.
1. T
o select the desired picture effect, follow the "Changing the
Picture Standard" instructions number 1 to 3 (On page 15).
2. Press the ▲ or ▼ button to select "Reset", then press the
ENTER
button.
3. Press the ▲ or ▼ button to select "OK" or "Cancel".
Press the
ENTER
button.
4. Press the EXIT button to exit.
The "Reset" will be set for each "Picture" mode.
Picture
More
Picture Options
Reset : OK
T
V
Move Enter Return
OK
Cancel
BN68-01410F-01Eng-0529.indd 17 2008-05-30 ¿ÀÀü 9:23:02
English - 18
Conguring Picture Option
1. Press the MENU button to display the menu.
Press the
ENTER
button, to select "Picture".
2. Press the ▲ or ▼ button to select "Picture Options", then press
the
ENTER
button.
3. Select the required option by pressing the ▲ or ▼ button, then
press the
ENTER
button.
4. When you are satised with your setting, press the
ENTER
button.
5. Press the EXI
T button to exit.
In PC mode, you can only make changes to the “Colour
Tone” and “Size” from among the items in “Picture Options”.
Colour
Tone: Cool2/Cool1/Normal/Warm1/Warm2
You can select the most comfortable colour tone to your eyes.
The adjusted values are stored according to the selected
"Picture" mode.
“Warm1” or “Warm2” is only activated when the picture mode is "Movie".
Size:
Auto Wide/16:9/Wide Zoom/Zoom/4:3/Just Scan
You can select the picture size which best corresponds to your viewing requirements.
Auto Wide: Automatically adjusts the picture size to the "16:9" aspect ratio.
16:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.
Wide Zoom: Magnify the size of the picture more than 4:3.
Zoom: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size.
4
:3: This is the default setting for a video movie or normal broadcasting.
Just Scan: Use the function to see the full image without any cutoff when HDMI (720p/1080i/
1080p) or Component (1080i/1080p) signals are input.
"Auto Wide" function is available only in "TV", "Ext.1", "Ext.2", "AV", and "S-Video" mode.
In PC Mode, only "16:9" and "4:3" mode can be adjusted.
Settings can be adjusted and stored for each external device you have connected to an input of
the TV.
Temporary image retention may occur when viewing a static image on the set for more than two
hours.
"Wide Zoom": Move the screen up/down using the ▲ or ▼ button after selecting the
by
pressing the ► or ENTER button.
"Zoom": Select
by pressing the ◄ or ►button. Use the ▲ or ▼ button to move the picture up
and down. After selecting , use the ▲ or ▼ button to magnify or reduce the picture size in the
vertical direction.
When Double (
, ) mode has been set in PIP, the Picture Size cannot be set.
After selecting “Just Scan” in HDMI (1080i/1080p) or Component (1080i/1080p) mode:
Select
by pressing the ◄ or ►button. Use the ▲, ▼, ◄ or ► button to move the picture.
Reset: Press the ◄ or ► button to select “Reset”, then press the ENTER button.
You can initialize the setting.
If you use the “Just Scan” function with HDMI 720p input, 1 line will be cut at the top, bottom, left
and right as in the overscan function.
You can select these options by simply pressing the P.SIZE
button on the remote control.
Picture
More
Picture Options
Reset
: OK
TV
Move Enter Return
Picture Options
Colour Tone : Normal
Size
: Auto Wide
Screen Mode : 16:9
Digital NR
: Auto
DNIe
: Off
HDMI Black Level
: Normal
Movie Plus
: Low
Blue Only Mode
: Off
Move Enter Return
TV
BN68-01410F-01Eng-0529.indd 18 2008-05-30 ¿ÀÀü 9:23:03
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53

Samsung LE46A550P1R Manuel utilisateur

Catégorie
Téléviseurs LCD
Taper
Manuel utilisateur
Ce manuel convient également à

dans d''autres langues