Approval and Certication
Product
产品名称 testo 316-1-EX
Mat.-No.
型号 0560 3163
Date
日期 20.09.2022
The use of the wireless module is subject to the regu-
lations and stipulations of the respective country of use, and
the module may only be used in countries for which a coun-
try certication has been granted. The user and every
owner has the obligation to adhere to these regulations and
prerequisites for use, and acknowledges that the re-sale,
export, import etc. in particular in countries without wireless
permits, is his responsibility.
Country Comments
Australia E 1561
Canada IC: 6127B-TESTO316
HVIN: testo 316-1-EX
Compliance Distance: 10 mm
see IC Warnings
Europa + EFTA
The EU Declaration of
Conformity can be found on
the testo homepage www.
testo.com under the product
specic downloads.
EU countries:
Belgium (BE), Bulgaria (BG), Den-
mark (DK), Germany (DE), Estonia
(EE), Finland (FI), France (FR),
Greece (GR), Ireland (IE), Italy (IT),
Latvia (LV), Lithuania (LT), Luxem-
bourg (LU), Malta (MT), Netherlands
(NL), Austria (AT), Poland (PL), Por-
tugal (PT), Romania (RO), Sweden
(SE), Slovakia (SK), Slovenia (SI),
Spain (ES), Czech Republic (CZ),
Hungary (HU), Republic of Cyprus
(CY).
EFTA countries:
Iceland, Liechtenstein, Norway,
Switzerland
WEEE Reg. no.:
DE 75334352
Japan Contains Lierda S37 BLE module
201-200983
See Japan Information
United King-
dom (GB)
The UK Declaration of Con-
formity can be found on the
testo homepage www.testo.
com under the product speci-
c downloads.
USA
FCC ID: WAF-TESTO316
See FCC Warnings
Bluetooth®-
Information
Feature
特征与参数
Values
数值
Bluetooth®
range / 范围
up to 20 m (65 feet)
(free eld /无障碍
场地)
radio type
型号
Bluetooth® Low
Energy (BLE) 4.2
company
制造商 LSD Science &
Technology Co.,
Ltd
Lierda LSD4BT_
S37
RF Band
射频频段
2402 – 2480MHz
power output
输出功率 9.37 dBm
Bluetooth®
SIG Listing
Declaration ID D043360
member company Testo SE & Co.
KGaA
ATEX 1258 ATEX II 2 G Ex ib IIC T1Gb
IC Warnings
CAN ICES-003(B)/NMB-003(B):
This Class B digital apparatus complies with Canadian
ICES-003.
Cet appareil numérique de la classe [B] est conforme à la
norme NMB-003 du Canada.
RSS-Gen & RSS-247 statement:
This device complies with Industry Canada licence-exempt
RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including inter-
ference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d‘Industrie
Canada applicables aux appareils radio exempts de licence.
L‘exploitation est autorisée aux deux conditions suivantes :
(1) l‘appareil ne doit pas produire de brouillage, et
(2) l‘utilisateur de l‘appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible
d‘en compromettre le fonctionnement.
Caution: Radio Frequency Radiation Exposure
This equipment complies with IC radiation exposure limits
set forth for an uncontrolled environment and meets the IC
radio frequency (RF) Exposure Guidelines.
Co-Location:
This transmitter must not be co-located or operated in con-
junction with any other antenna or transmitter.
Attention : exposition au rayonnement de radiofréquences
Cet équipement est conforme aux limites d‘exposition aux
radiofréquences IC xées pour un environnement non con-
trôlé et aux Lignes directrices relatives à l‘exposition aux
radiofréquences (RF).
Co-Location
Ce transmetteur ne peut pas être installé en colocation ou
être utilisé avec une autre antenne ou transmetteur, quel
qu‘en soit le type.
FCC Warnings
Information from the FCC (Federal Communications Com-
mission)
For your own safety
Shielded cables should be used for a composite interface.
This is to ensure continued protection against radio fre-
quency interference.
FCC warning statement
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit diffe-
rent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV techni-
cian for help.
Caution
Changes or modications not expressly approved by the
party responsible for compliance could void the user‘s
authority to operate the equipment. Shielded interface cable
must be used in order to comply with the emission limits.
Warning
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
Caution: Radio Frequency Radiation Exposure
This equipment complies with FCC radiation exposure limits
set forth for an uncontrolled environment and meets the
FCC radio frequency (RF) Exposure Guidelines.
Co-Location:
This transmitter must not be co-located or operated in con-
junction with any other antenna or transmitter.
Japan Information
当該機器には電波法に基づく、技術基準適合証明等を
受けた特定無線設備を装着している。