Nameplate Camera
User Manual
Please scan the below QR codes to get the initiatives on the use of video
products, safety instructions, and communication matrix.
Initiatives
Safety Instructions
Communication
Matrix
©2022 Hangzhou Hikvision Digital Technology Co., Ltd. All rights
reserved.
About this Manual
The Manual includes instructions for using and managing the Product.
Pictures, charts, images and all other information hereinafter are for
description and explanation only. The information contained in the
Manual is subject to change, without notice, due to firmware updates or
other reasons. Please find the latest version of this Manual at the
Hikvision website (https://www.hikvision.com/).
Please use this Manual with the guidance and assistance of professionals
trained in supporting the Product.
Trademarks
and other Hikvision’s trademarks and logos are the
properties of Hikvision in various jurisdictions.
Other trademarks and logos mentioned are the properties of their
respective owners.
Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS
MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE,
SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS” AND “WITH ALL
FAULTS AND ERRORS”. HIKVISION MAKES NO WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY,
SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE
USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL
HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL,
INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS,
DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION,
OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF
DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT
(INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN
CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES
FOR INHERENT SECURITY RISKS, AND HIKVISION SHALL NOT TAKE ANY
RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR
OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK,
VIRUS INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER,
HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL
APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING
THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU
ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES
NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT
LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR
DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE
THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE
DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION,
THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL
WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR
EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF
HUMAN RIGHTS ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE
APPLICABLE LAW, THE LATTER PREVAILS.
Regulatory Information
FCC Information
Please take attention that changes or modification not expressly
approved by the party responsible for compliance could void the user's
authority to operate the equipment.
FCC compliance: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
● Reorient or relocate the receiving antenna.
● Increase the separation between the equipment and receiver.
● Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
● Consult the dealer or an experienced radio/TV technician for help.
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including
interference that may cause undesired operation.
EU Conformity Statement
This product and - if applicable - the supplied accessories too are
marked with "CE" and comply therefore with the applicable
harmonized European standards listed under the RE Directive
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
2014/53/EU, the EMC Directive 2014/30/EU, the LVD Directive
2014/35/EU, the RoHS Directive 2011/65/EU.
2012/19/EU (WEEE directive): Products marked with this symbol
cannot be disposed of as unsorted municipal waste in the
European Union. For proper recycling, return this product to your local
supplier upon the purchase of equivalent new equipment, or dispose of it
at designated collection points. For more information see:
www.recyclethis.info
2006/66/EC (battery directive): This product contains a battery that
cannot be disposed of as unsorted municipal waste in the European
Union. See the product documentation for specific battery information.
The battery is marked with this symbol, which may include lettering to
indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling,
return the battery to your supplier or to a designated collection point.
For more information see: www.recyclethis.info
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements.
This device complies with Industry Canada license-exempt RSS
standard(s). Operation is subject to the following two conditions:
1. this device may not cause interference, and
2. this device must accept any interference, including interference that
may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables
aux appareils radioexempts de licence. L'exploitation est autorisée aux
deux conditions suivantes:
1. l'appareil ne doit pas produire de brouillage, et
2. l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d'en compromettre le
fonctionnement.
Under Industry Canada regulations, this radio transmitter may only
operate using an antenna of a type and maximum (or lesser) gain
approved for the transmitter by Industry Canada. To reduce potential
radio interference to other users, the antenna type and its gain should be
so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not
more than that necessary for successful communication.
Conformément à la réglementation d'Industrie Canada, le présent
émetteur radio peut fonctionner avec une antenne d'un type et d'un gain
maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada.
Dans le but de réduire les risques de brouillage radioélectrique à
l'intention des autres utilisateurs, il faut choisir le type d'antenne et son
gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne
dépasse pas l'intensité nécessaire à l'établissement d'une communication
satisfaisante.
1 Product Introduction
Nameplate camera (hereinafter referred to as “device”) is a wearable
intelligent digital nameplate with audio and video recording functions. It
offers two types: with screen or without screen. The device with screen
adopts the electronic ink screen that enables flexible settings of digital
nameplate information.
Note
The device without screen has no screen. The actual device prevails.
Button
Description
Indicator
Description
On/Off
button
● When the device is off,
hold it until the power
indicator changes to red,
and the device starts up.
● When the device is on,
hold it until the power
indicator is off, and the
device shuts down.
● When the device is on,
press it to start recording,
and the power indicator
will be flashing green
(slowly). Then press it
again to stop recording,
and the power indicator
will be solid green.
Power
indicator
● Flashing red (fast):
Device exception (low
battery, storage
exception, storage full,
etc.).
● Flashing red (slowly):
The device is being
charged.
● Solid red: The device is
fully charged.
● Flashing green (slowly):
The device is recording.
● Solid green: The device
is on standby.
Wi-Fi
button
When the device is on,
hold it to enable the Wi-Fi
AP. Then press it again to
disable the Wi-Fi AP.
Wi-Fi
indicator
● Flashing blue (slowly):
The Wi-Fi AP is on, and
the mobile terminal is
connected.
● Flashing blue (fast): The
Wi-Fi AP is on, but the
mobile terminal is not
connected.
2 Device Wearing
Danger
The device adopts magnetic design. DO NOT use the device if you had
surgery before (for example, installed metal or pacemaker in the body).
The device supports to wear with the magnet or pin. When wearing light
clothing, you can put the device on your clothing and fix it with the
magnetic plate. When wearing thick clothing, you can use the pin on the
back plate to clip the device on your clothing, and use the magnetic plate
to fix the device.
Keep your clothing flat when wearing the device to avoid affecting the
recording effect.
3 Device Operation via Mini AI Assistant
3.1 Add Device
You can scan the below QR codes to get and install the Mini AI Assistant
application, and then add a device to set.
Android
iOS
Steps
1. When the device is on, hold the Wi-Fi button to enable the Wi-Fi AP.
2. Enable the WLAN of the mobile terminal, find the device Wi-Fi AP on
the available list, and enter the password to connect.
Note
● The device Wi-Fi AP naming method: miniAI-serial No.
● The initial password of device Wi-Fi AP is “abcd1234”. Please
change the password via the Mini AI Assistant (see the Mini AI
Assistant for details).
● If the mobile terminal is not connected to the Wi-Fi AP after 3
minutes, the Wi-Fi AP will automatically turn off. If you want to
connect to the Wi-Fi AP, you can hold the Wi-Fi button again to
enable the Wi-Fi AP.
3. Open the Mini AI Assistant. The connected device will display on the
device list, and its status will be “Online”.
What to do next
You can select the connected device to view, operate, and set. See the
Mini AI Assistant for details.
3.2 Set Digital Nameplate
For the device with screen, you can set the nameplate information
displayed on the screen.
Steps
1. Tap on the upper right corner of the APP live view page and tap
Nameplate Template Settings.
2. Select Nameplate Template and tap OK.
3. Set the two-line text content.
Note
1 to 14 characters allowed.
4. Tap Confirm.
UD26665B
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
dans d''autres langues
- English: Hikvision MCC206W User manual
Documents connexes
Autres documents
-
EZVIZ Indoor Security Camera 1080p Motion Alert Night Vision Baby/Pet/Elder Monitoring 135° Wide Angle 2.4G Wi-Fi 2-Way Audio Smart Home System Works Manuel utilisateur
-
EZVIZ Outdoor 1080p Security Camera Surveillance Strobe Light & Siren IP66 Weatherproof 100ft Night Vision 2.4G Wi-Fi/Wired Two-Way Audio Works Manuel utilisateur
-
-