Sony CDP-CX450 Le manuel du propriétaire

Catégorie
Lecteur CD
Taper
Le manuel du propriétaire
4-229-367-23 (1)
2000 Sony Corporation
CDP-CX450
Compact Disc
Player
Operating Instructions
Mode d’emploi
GB
FR
2
GB
WARNING
To prevent fire or shock
hazard, do not expose
the unit to rain or
moisture.
To avoid electrical shock,
do not open the cabinet.
Refer servicing to
qualified personnel only.
for the customers in North America
Welcome!
Thank you for purchasing this Sony
Compact Disc Player. Before operating
the unit, please read this manual
thoroughly and retain it for future
reference.
ENERGY STAR
®
is a U.S.
registered mark.
As
ENERGY STAR
®
Partner,
Sony Corporation has
determined that this product
meets the
ENERGY STAR
®
guidelines for energy
efficiency.
TO PREVENT ELECTRIC SHOCK, DO NOT
USE THIS POLARIZED AC PLUG WITH AN
EXTENSION CORD, RECEPTACLE OR
OTHER OUTLET UNLESS THE BLADES
CAN BE FULLY INSERTED TO PREVENT
BLADE EXPOSURE.
For the customers in Canada
This appliance is classified as a CLASS 1
LASER product.
The CLASS 1 LASER PRODUCT
MARKING is located on the rear
exterior.
About This Manual
The instructions in this manual are for
model CDP-CX450.
Conventions
Instructions in this manual describe
the controls on the player.
You can also use the controls on the
remote if they have the same or
similar names as those on the player.
The following icons are used in this
manual:
Z
Indicates that you can do the
task using the remote.
z
Indicates hints and tips for
making the task easier.
Don’t throw a battery,
dispose it as the
injurious wastes.
3
GB
TABLE OF CONTENTS
Getting Started
Unpacking............................................................................................................................. 4
Hooking Up the System ...................................................................................................... 4
Connecting Another CD Player ......................................................................................... 6
Setting Up the Remote ........................................................................................................ 7
Inserting CDs ...................................................................................................................... 10
Playing CDs
Playing a CD ....................................................................................................................... 13
Using the Display .............................................................................................................. 14
Locating a Specific Disc .................................................................................................... 16
Specifying the Next Disc to Play ..................................................................................... 18
Playing the Disc Just Inserted (Easy Play) ..................................................................... 19
Playing Discs in Various Modes (Repeat/Shuffle Play) .............................................. 19
Creating Your Own Program (Program Play) ............................................................... 21
Using the Timer ................................................................................................................. 26
Fading In or Out................................................................................................................. 26
Storing Information About CDs (Custom Files)
What You Can Do With the Custom Files ..................................................................... 27
Labeling Discs (Disc Name) ............................................................................................. 27
Loading the Custom Files into the Remote .................................................................... 30
Storing Custom File Information Using a Keyboard.................................................... 32
Storing Specific Tracks (Delete Bank) ........................................................................... 32
Grouping Discs (Group File)............................................................................................ 33
Classifying Discs According to Artist Name (Artist File)............................................ 36
Storing Your Favorite Tracks (Hit List) .......................................................................... 39
Using the Player with Another Component
Controlling Another CD Player (Advanced Mega Control) ....................................... 41
Playing Alternately (No-Delay Play/X-Fade Play) ...................................................... 42
Controlling the Player by Another Unit ......................................................................... 43
Additional Information
Precautions ......................................................................................................................... 44
Notes on CDs ...................................................................................................................... 44
Troubleshooting ................................................................................................................. 45
Specifications ...................................................................................................................... 45
Index
Index .................................................................................................................................... 46
GB
Getting Started
4
GB
Unpacking
Check that you received the following items:
Audio cord (1)
Video cord (1)
Monaural (2P) mini-plug cord (1) (Connecting cord
for CONTROL A1
) (supplied for Canadian models
only)
Remote commander (remote) (1)
Size AA (LR6) batteries (3)
Inserting batteries into the remote
You can control the player using the supplied remote.
Insert three size AA (LR6) batteries (supplied) by
matching the + and ends on the batteries to the
diagram inside the battery compartment.
Insert the negative () end first, then push in and down
until the positive (+) end clicks into position.
When using the remote, point it at the remote sensor
on the player.
Hooking Up the System
Overview
This section describes how to hook up the CD player to
an amplifier. Be sure to turn off the power of each
component before making the connections.
White
(L)
Red
(R)
White
(L)
Red
(R)
What cords will I need?
Audio cord (supplied) (1)
z When to replace batteries
If E flashes in the remotes display, replace all the
batteries with new alkaline batteries. Use of battery types
other than alkaline batteries, such as manganese
batteries, may not last longer than the alkaline batteries.
The loaded memory in the remote will be retained for a
few minutes while you replace the batteries.
Notes
Do not leave the remote near an extremely hot or humid
place.
Do not drop any foreign object into the remote casing,
particularly when replacing the batteries.
Do not expose the remote sensor to direct sunlight or leave
too near lighting apparatuses. Doing so may cause a
malfunction.
If you do not use the remote for an extended period of time,
remove the batteries to avoid possible damage from battery
leakage and corrosion.
Getting Started
CD player
DIGITAL OUT
(OPTICAL)
Amplifier
To line output (L)
To line output (R)
To an AC outlet
: Signal flow
To audio input
To an AC outlet
CONTROL A1
MONITOR OUT
Getting StartedGetting Started
5
GB
Hookups
When connecting an audio cord, be sure to match the
color-coded cord to the appropriate jacks on the
components: Red (right) to Red and White (left) to
White. Be sure to connect firmly to avoid hum and
noise.
If you have a digital component such as a digital
amplifier, D/A converter, DAT, or MD
Connect the component via the DIGITAL OUT (OPTICAL)
connector using an optical cable (not supplied). Take off the
cap and plug in the optical cable.
Note that you cannot use fading in or out (page 26) and
Time Fade (page 26) functions when making this
connection.
z If you have a Sony component with the CONTROL A1
(or CONTROL A1) jack
Connect the component via the CONTROL A1 (or
CONTROL A1) jack. You can simplify the operations of
audio systems composed of separate Sony components.
For details, refer to the supplementary CONTROL A1
Control System instructions.
Amplifier
CD player
Optical cable (not supplied)
Note
When you connect via the DIGITAL OUT (OPTICAL)
connector, noise may occur when you play CD software other
than music, such as a CD-ROM.
z You can check the disc information by observing the
TV screen when you connect the player and your TV
with the video cable.
CD player Digital component
Connecting the AC power cord
Connect the AC power cord to a wall outlet.
Note on placement of the player
Be sure to place the player in a flat, horizontal place.
If the player is left in a slanted position, it may cause a
malfunction or damage the player.
INPUT
CD
L
R
IN OUT
L
R
L
R
2ND CD ANALOG
DIGITAL
INPUT
OPTICAL
DIGITAL
OPTICAL
OUT
Video cord (supplied)
INPUT
VIDEO
OUT
MONITOR
CD player
TV
Getting Started
6
GB
What cords will I need?
Audio cord (1) (Use the cord supplied with the player to be
connected.)
Monaural (2P) mini-plug cord (1) (supplied for Canadian
models only)
1 Connect the players with an audio cord (see also
Hookups on page 5).
2 Connect the players with a monaural (2P) mini-
plug cord.
Connecting Another CD Player
If you have a Sony CD player in which 5, 50, 200, 300,
or 400 discs can be inserted and which is equipped
with the CONTROL A1
(or CONTROL A1) jack and
the command mode of that player can be set to CD 3,
you can control that player as the second player with
this player. After connecting this player and an
amplifier, follow the procedure below.
Be sure to turn off the power of each player before
making this connection.
CDP-CX235, etc.
CDP-CX450
To 2ND CD IN
CDP-CX235, etc.
To an AC outlet
To an AC outlet
: Signal flow
To audio input
To audio output
To ANALOG OUT
Amplifier
CDP-CX450
For details on this connection, refer to the
supplementary CONTROL A1
Control System
instructions.
3 Set the command mode of this player to CD1
(factory setting) or CD2, and set that of the second
player to CD3.
Check the display for the current command mode
of this player, if the mode is CD3, change the mode
as described on the next page.
For details on how to operate the second player,
see Controlling Another CD Player on page 41
and Playing Alternately on page 42.
4 Connect the AC power cord of both players to an
AC outlet.
5 Perform Player check by following the steps in
Storing player data in the remote on page 9.
To an AC outlet
To
CONTROL A1
Current command mode
LINE
OUT
L
R
IN OUT
L
R
L
R
2ND CD ANALOG
CONTROL A1
CONTROL A1
CDP-CX235, etc.CDP-CX450
1
SECSTEPMINART.
GROUPTRACK
HITART.NEXT2nd
CD2 CD3
1
GROUP
NO DELAY
TEXTCDMULTI
PROGRAM 1 2 3 X-FADE DELETE
REPEATSHUFFLE
DISC
*DISC-1 *** ***
CD1
ALL DISCS
Getting StartedGetting Started
7
GB
Notes
Do not connect any player other than the one used as the
second player to the 2ND CD IN jacks of this player.
When connecting a second CD player, do not connect the
DIGITAL OUT (OPTICAL) connector of this player to the
amplifier.
Changing the command mode of the player
1 Press MENU/NO.
2 Turn the JOG dial until Command Mode?
appears in the display.
3 Push the JOG dial.
The current command mode appears.
4 Turn the JOG dial to select CD1 or CD2, then push
the JOG dial again.
MENU/NO
SECSTEPMINART.
GROUPTRACK
HITART.NEXT2nd DISC
1
GROUP
NO DELAY
TEXTCDMULTI
PROGRAM 1 2 3 X-FADE DELETE
CD3
REPEATSHUFFLE1
CD1 CD2
ALL SDISC
* CD1[CD ]C2D3*
Current command mode
I / 1
JOG
Setting Up the Remote
Understanding the 2-way remote system
The supplied remote operates under a 2-way remote
system. While you use the remote and the remotes
display is on, the component responds to signals sent
from the remote by sending signals back to the remote.
During remote operations, point the remote toward the
player at all times.
To avoid unintentional operations, turn off the 2-way
remote system of this or connected player when:
you connect via CONTROL A1/CONTROL A1
two
or more components supplied with a remote with the
mark (for example, when you connect this
player to another set of this player or certain
receiver/amplifier). In this case, you need to turn off
the 2-way remote system of the components except
the one you want to use as a main unit for the
system. When you use the remote, make sure to turn
on the main unit.
you connect this player to a receiver/amplifier
supplied with the RM-TP501, RM-TP501E, or RM-
LJ301 remote control. In this case, you need to turn
off this players 2-way remote system.
To turn off this players 2-way remote system, see To
turn off the 2-way remote system on page 8.
Component
Getting Started
8
GB
To turn off the 2-way remote system
You may need to turn off the players 2-way remote
system depending on which components you connect
to this player. See Understanding the 2-way remote
system on page 7 to see if you need to do so.
Even though you turn off the players 2-way remote
system, you can use the remote supplied with the
player by pointing the remote toward the unit such as
a receiver that the 2-way remote system is turned on.
In this case, position the player in the proximity of the
unit that the 2-way remote system is turned on.
1 Press MENU/NO.
2 Turning the JOG dial until 2WAY OFF ? appears
in the display window.
3 Press YES.
To return to normal setting
After following steps 1 and 2, and 2WAY ON ? is
displayed, then press YES.
If you connect to the Sony CD player CDP-CX260 or
CDP-CX88ES, press OPERATE on the transmitter/
receiver to turn it off, and set the 2-way remote system
of the player to on.
Note
If you use this player with a receiver/amplifier, turn the
receiver/amplifier on when using this player.
MENU/NO
YES
How to use the remote
Press ?/1 on the player to turn on the player.
If the following message appears in the remotes
display while setting up the remote, point the remote
at the main player.
an' t receive
elPaseturn
to a main unit
hi
C
tsREMOTE
You can select an item shown in the remotes display
by moving the cursor (B). To move the cursor down,
push the Easy scroll key downward. To move the
cursor up, push the Easy scroll key upward.
30°
?/1
CONTINUE
PROGRAM
NAME SCAN
MENU
PUSH ENTER
TRACK
PLAYER SELECT
BACK
DISC
SKIP
SHUFFLE
REPEAT
SCROLL
MENU
Easy scroll
key
Note that the displayed message disappears
automatically if you dont proceed for more than a few
moments.
JOG
I / 1
BACK
When you press BACK, the remotes display returns to
the previous display.
Getting StartedGetting Started
9
GB
Storing player data in the remote
The remote checks and stores the player data such as
the command mode sent from the player(s) so that you
can use the remote to control the player(s).
Turn on the player before operation.
1 Press MENU.
Note the V mark indicates that the menu
continues.
Press the Easy scroll key downward to see the next
items.
2 Move the cursor (B) to Set up by using the Easy
scroll key, then press the Easy scroll key.
3 Move the cursor to Player check, then press the
Easy scroll key.
The display shows the disc data in the player after
Now player checking... appears.
When you connect another CD player, the disc
data in the second CD player also appears.
Note
When you change the command mode of the player or
connect a 2nd player, be sure to perform Player check.
Name sea r ch
Program play
Program input
Artis selectt
CD1
Player check
Back l ight mode
Memo r y c l ea r
Contrast adjust
CD1
aster player
=CD1/400discs
M
CD1
Adjusting the display contrast of the
remote
1
Press MENU.
2 Move the cursor (B) to Set up by using the Easy
scroll key, then press the Easy scroll key.
3 Move the cursor to Contrast adjust, then press
the Easy scroll key.
4 Adjust the contrast by pressing the Easy scroll key
up or down and holding until the desired level of
contrast is attained.
5 Press the Easy scroll key.
aster player
= CD1/400discs
= CD3/ 51discs
nd
M
2 player
CD1
Name sea r ch
Program play
Program input
Artis selectt
CD1
Player check
Back l ight mode
Memo r y c l ea r
Contrast adjust
CD1
ONTRAST
ADJUST
adjus
on
C
ctrast
t
CD1
Getting Started
10
GB
Inserting CDs
You can insert up to 400 discs into this player.
1 Press ?/1 to turn on the player.
2 Open the front cover by pressing OPEN/CLOSE.
3 Turn the JOG dial until you find the disc slot
where you want to insert a disc, while checking the
disc number (written beside every slot and also
indicated in the small display).
I / 1
Rotary table
Loading position
Playing position
OPEN/CLOSE
JOG
?/1
Top view of the disc slot
I / 1
Disc slot at the loading position
Disc number
Turning off the LCD back light
You can conserve the remotes batteries by turning off
the LCD (Liquid Crystal Display) backlight.
1 Press MENU.
2 Move the cursor (B) to Set up by using the Easy
scroll key, then press the Easy scroll key.
3 Move the cursor (B) to Back light mode by using
the Easy scroll key, then press the Easy scroll key.
4 Move the cursor to OFF, then press the Easy
scroll key.
Note
If you erase all the data stored in the remote (page 31), follow
the procedure above to turn the backlight off again.
Name sea r ch
Program play
Program input
Artis selectt
CD1
CD Bac k l i gh t
OFF
ON
L
CD1
Player check
Back l ight mode
Memo r y c l ea r
Contrast adjust
CD1
Small
display
Getting StartedGetting Started
11
GB
The disc number at the loading position appears in
the display. If the disc has a Disc Name (see page
27), the Disc Name appears instead of the disc
number. As you turn the JOG dial, the disc number
or the Disc Name changes.
You can classify discs by using the Group File
function or Artist Name function. This feature lets
you easily find the disc you want to play. For
details, see Grouping discs (Group File) on page
33 and Classifying discs according to Artist Name
(Artist File) on page 36.
4 Insert a disc with the label side facing right.
After inserting the disc, you can enter the original
disc title to replace the disc numbers (see
Labeling discs (Disc Name) on page 27) so you
can locate it easily whenever you want to play it.
5 Repeat steps 3 and 4 to insert more discs.
6 Close the front cover by pressing OPEN/CLOSE.
The rotary table turns and the disc slot at the
loading position is set to the playing position.
Always keep the front cover closed except when
inserting or removing discs.
1
CD2
GROUP
NO DELAY
TEXTCDMULTI
PROGRAM 1 2 3 X-FADE DELETE
CD3
REPEATSHUFFLE 1
SECSTEPMINART.
GROUPTRACK
HITART.NEXT2nd
ALL SDISC
DISC
*DISC-2 **0 ***
CD1
Disc number or the Disc Name
With the label side
facing right
CAUTION
Do not insert an 8 cm (3-inch) CD adaptor.
The player cannot play an 8 cm CD. Do not insert an
8 cm (3-inch) CD or an 8 cm (3-inch) CD adaptor
(CSA-8). It may damage the player and disc.
Do not move the player after inserting discs.
Be sure to place the player in a flat, horizontal
position. Do not place the player in a slanted
position.
Do not move the player and avoid any physical
shock after inserting discs.
When transporting the player, remove all discs
from the player.
Make sure to insert the disc at a right angle to the
rotary table.
If the disc is not inserted into the slot completely (ex.
when you press A), reinsert the disc at a right angle
to the rotary table.
Do not attach seals or stickers, etc. to CDs.
If seals or stickers, etc. are attached to a CD, the
player may not operate properly and the player or
the disc may be damaged.
Notes
If you drop a disc into the player and/or the CD does
not go into the slot correctly, consult your nearest Sony
dealer.
Make sure the rotary table comes to a complete stop
before inserting or removing discs.
The front panel closes automatically when you press
H. Be careful not to put your hand into the player
after pressing H, otherwise your hand may be caught
in the front panel.
Disc that is not fully inserted
CDTEXT
1
CD2
GROUP
NO DELAY
MULTI
PROGRAM 1 2 3 X-FADE DELETE
CD3
REPEATSHUFFLE 1
SECSTEPMINART.
GROUPTRACK
HITART.NEXT2nd
ALL SDISC
DISC
SONYHIT **S ***
CD1
Getting Started
12
GB
Removing CDs
After following steps 1 to 3 of Inserting CDs on page
10, remove the discs. Then close the front cover.
z To remove discs easily
After following steps 1 to 3 of Inserting CDs on page
10, press A (DISC EJECT). The disc in the selected slot
moves up and you can remove the disc easily. When you
press A again, the disc returns to the loaded position. If
the disc does not return to the loaded position, reinsert
the disc.
Playing CDs
13
GB
Playing CDs
Playing CDs
Playing a CD
You can play all the tracks on a disc in the original
order (Continuous Play). You can also play up to 400
discs consecutively. Make sure you have inserted the
discs correctly as indicated on pages 10 and 11.
1 Turn on the amplifier and select the CD playing
position.
2 Press ?/1 to turn on the player.
3 Press CONTINUE to select ALL DISCS or 1 DISC
Continuous Play mode.
Each time you press CONTINUE, ALL DISCS or
1 DISC appears alternately in the display.
4 Turn the JOG dial until the desired disc number or
Disc Name (see page 27) appears in the display to
select the first disc (ALL DISCS) or the disc you
want (1 DISC).
5 Push the JOG dial to start playing and adjust the
volume on the amplifier.
The selected disc is set to the playing position, and
the player plays all the discs from the selected one
(ALL DISCS) or all the tracks once (1 DISC).
I / 1
CONTINUE
JOG
?/1
H
1
CD2
GROUP
NO DELAY
TEXTCDMULTI
PROGRAM 1 2 3 X-FADE DELETE
CD3
REPEATSHUFFLE 1
SECSTEPMINART.
GROUPTRACK
HITART.NEXT2nd
ALL SDISC
DISC
*DISC-2 **0 ***
CD1
When you select
ALL DISCS
1 DISC
The player plays
All discs in the player consecutively
in the order of disc number. Empty
disc slots are skipped.
Only the one disc you have selected.
To
Stop playback
Pause
Resume playing after
pause
Go to the next disc Z
Go back to the
preceding disc Z
Go to a specific track
directly Z
Go to a point in a
track while monitoring
the sound Z
Go to a point in a track
by observing
the display Z
Go to the next track
Go back to the
preceding track
Stop playing and
remove the disc
Do this
Press x.
Press X.
Press X or H.
Press DISC SKIP + once.
Hold down the button to skip other
discs.
Press DISC SKIP once.
Hold down the button to skip other
discs.
Press the number button of the track
on the remote. When you directly
locate a track numbered over 10,
press >10 first, then the
corresponding number buttons.
Press m (backward)/M
(forward) on the remote and hold
down until you find the point.
Press m (backward)/M
(forward) on the remote and hold
down until you find the point
during pause. You will not hear the
sound during the operation.
Turn the . AMS > dial
clockwise by one click.
Turn the . AMS > dial
counterclockwise by one click.
Press OPEN/CLOSE.
Operations you way want to do during play
z When you turn off the player
The player remembers the last playing disc and the play
mode: Continuous (on page 13), Shuffle (on page 20), or
Program (on page 21). When you turn on the player
again, the player plays the same disc in the same play
mode.
Note
If appears in the large display, the disc has reached the
end while you were pressing M. Turn the . AMS >
dial counterclockwise or press m to go back.
Playing CDs
14
GB
Using the Display
You can check stored disc information, such as the Disc
Names (see page 27) or Artist Names (see page 36), by
using the display.
Unlike a normal CD, a CD TEXT disc includes
information such as the disc title or artist name. The
display shows the CD TEXT information so that you
can check the current disc title, artist name, and track
title. When the player detects a CD TEXT disc, CD
TEXT appears in the display. If your CD TEXT disc
has multi-language capacity, MULTI CD TEXT
appears in the display. If you want to check the
information in another language, refer to Selecting the
language of the CD TEXT information on page 15.
Display information of the normal discs
Display information in stop mode
The display shows the current disc number, total
number of tracks, and total playing time of the disc.
Locating a specific track or a point in a
track while observing the remote display
CONTINUE
PROGRAM
NAME SCAN
MENU
PUSH ENTER
TRACK
PLAYER SELECT
BACK
DISC
SKIP
SHUFFLE
REPEAT
SCROLL
./>
m/M
Easy scroll
key
TRACK
H
1 During stop mode, press TRACK.
2 Move the cursor (B) to the desired track by using
the Easy scroll key.
3 Press the Easy scroll key.
To return to the previous display, press BACK.
Note
When you select a CD TEXT disc, track titles appear in step 2
instead of the track numbers.
Disc123
* DISC-123*
2 . ( TRACK2 )
1 . ( TRACK1 )
CD1
3 . ( TRACK3 )
4 . ( TRACK4 )
6 . ( TRACK6 )
5 . ( TRACK5 )
CD1
JOGSCROLL
MENU/NO
I / 1
1
CD2
GROUP
NO DELAY
TEXTCDMULTI
PROGRAM 1 2 3 X-FADE DELETE
CD3
REPEATSHUFFLE 1
SECSTEPMINART.
GROUPTRACK
HITART.NEXT2nd
ALL SDISC
DISC
*DISC-2 **0 ***
CD1
NEXT DISC
2nd PLAYER
DISC
Total playing time
Current disc number or Disc Name etc.
Total number of tracks
Current disc number
BACK
Playing CDs
15
GB
Playing CDs
The information is displayed as follows (in stop mode):
When the Artist Name is assigned to the current
disc
Disc title of CD TEXT/
Assigned Artist Name
When no Artist Name is assigned to the current
disc
Disc title of CD TEXT/Artist name of CD TEXT
Selecting the language of the CD TEXT
information
You can select the language used to display the CD
TEXT information when you select a CD TEXT disc
with multi-language information.
Once you select the language, the display shows the
information in the selected language until you turn off
the player. If the player cannot read the language
memorized in a CD TEXT disc, “other lang.” appears.
1 Press MENU/NO in stop mode.
“Select lang.?” flashes.
2 Push the JOG dial.
The current operating language flashes.
3 Turn the JOG dial until the language you want
appears in the display.
4 Push the JOG dial to select the language.
“Reading text” appears momentarily, then the
display shows the information in the selected
language.
z You can check the current language
1 Press MENU/NO while playing a CD TEXT disc.
“Show lang.?” flashes.
2 Push the JOG dial.
The current language appears momentarily.
You can also check the current language while selecting a
CD TEXT disc without multi-language information.
Note
If you select a CD TEXT disc that does not contain the
information of the selected language, the display shows the
information in another language according to the disc’s
priority.
Display information of the playing disc
While playing a disc, the display shows the current
disc number, track number, playing time of the track,
and the next disc number.
The large display shows up to 13 characters of the
information. When you press SCROLL, all the
information scrolls in the display.
The information is displayed as follows (in stop mode):
When the Artist Name is assigned to the current
disc
Disc Name/
Assigned Artist Name
When no Artist Name is assigned to the current
disc
Disc Name
Display information of CD TEXT discs
Display information in stop mode
The display shows the disc title. When you press
SCROLL, the disc title scrolls in the display. When you
assign the artist Name (see page 36), the artist name
also appears and scrolls in the display.
Display information while playing a disc
The display shows the disc and track title alternately.
When you press SCROLL, the disc title and track title
scroll in the display.
The display shows up to 13 characters of the
information. When you press SCROLL, all the
information scrolls in the display.
DISC
1
CD2
GROUP
NO DELAY
PROGRAM 1 2 3 X-FADE DELETE
CD3
REPEATSHUFFLE 1
SECSTEPMINART.
GROUPTRACK
HITART.NEXT2nd
ALL SDISC
Select* anlg.?
CD1
TEXTCDMULTI
DISC
1
CD2
GROUP
NO DELAY
PROGRAM 1 2 3 X-FADE DELETE
CD3
REPEATSHUFFLE 1
SECSTEPMINART.
GROUPTRACK
HITART.NEXT2nd
ALL SDISC
***Engl shi **?
CD1
TEXTCDMULTI
1
CD2
GROUP
NO DELAY
MULTI
PROGRAM 1 2 3 X-FADE DELETE
CD3
REPEATSHUFFLE 1
SECSTEPMINART.
GROUPTRACK
HITART.NEXT2nd
ALL SDISC
DISC
SONYHIT /HSite
CD1
CDTEXT
Playing time of the
track
Current disc number or Disc Name etc.
Current track number
Current disc number
1
CD2
GROUP
NO DELAY
TEXTCDMULTI
PROGRAM 1 2 3 X-FADE DELETE
CD3
REPEATSHUFFLE 1
SECSTEPMINART.
GROUPTRACK
HITART.NEXT2nd
ALL SDISC
DISC
*DISC-2 **0 ***
CD1
2nd PLAYER
NEXT
DISC
DISC
Next disc number
Playing CDs
16
GB
Notes
When searching for input characters, blanks and
symbols before the first character in the Disc Name are
ignored.
When searching for input characters, upper and lower
cases cannot be differentiated.
3 Push the JOG dial to select the disc.
In Program Play mode, the disc will be added to
the end of the program.
To cancel Name Search
Press NAME SEARCH again.
Note
The Name Search function on the player does not work
during ALL DISCS shuffle play.
Locating a disc while observing the TV
screen
When you connect the player and your TV (see page 5),
you can select the disc while observing the TV screen.
GROUP
SPACE
ENTER
X-FADE
CUSOR
ENTER
NAME INPUT
NO DELAY
ARTIST
MODE
HIT
LIST
CHECK
–– MEGA ––
CLEAR
DISC
DEL
SCROLL
CAPS
3
DEF
6
MNO
9
WXYZ
2
ABC&!?
5
JKL
8
TUV
10/0
10
1
4
GHI
7
PQRS
CURSOR
M/m/</,
1 Set your TV to the connected input of the player.
The disc information display appears on the TV
screen.
331 America
ARTIST NAME
Europe
Orchest
Poland
Italy o
David
Richard
Steve
Michael
Mike
Beethoven:Symphony N
DISC NAME
ALL DISCS CONTINUE
EMOTIONS
REPEAT GROUP 1 TRACK 1
Mozart:Piano concert
SONYHITS
Chopin:The piano wor
Vivaldy:Four seasons
World jazz hits 2000
World dance music No
Greatest popular hit
Greatest jazz titles
Super mega hits 2000
No.
332
333
334
335
336
337
338
339
340
CURSOR
ENTER
Disc number
Disc Name*
Assigned Artist Name*
Track title (appears when the current disc is
CD-TEXT disc)
* Each time you press SCROLL, the Disc Name and
Artist Name interchange.
Locating a Specific Disc
Locating a disc on the player
Turn the JOG dial until the desired disc number or
Disc Name (see page 27) appears in the display. Push
the JOG dial to start play.
To skip discs quickly
Press +100. Each time you press +100, the player skips
100 discs.
Locating a disc by searching for a specific
Disc Name (Name Search)
You can search for and locate a desired disc by the first
character of the Disc Name (see page 27). The Name
Search function can display the Disc Name in
alphabetical order.
1 Press NAME SEARCH.
NAME SEARCH appears in the display.
2 Turn the JOG dial to find the desired disc.
As you turn the JOG dial, the Disc Names starting
with the input character appear in the display.
The following characters are displayed as the first
character.
A B C D E F G H I J K L M N O P Q R S T U V W X
Y Z 0 1 2 3 4 5 6 7 8 9
If NOT FOUND appears in the display while
inputting the first character with the JOG dial, no
disc has been labeled using the input character.
I / 1
JOGNAME SEARCH
+100
DISC
CDTEXT
1
CD2
GROUP
NO DELAY
MULTI
PROGRAM 1 2 3 X-FADE DELETE
CD3
REPEATSHUFFLE 1
SECSTEPMINART.
GROUPTRACK
HITART.NEXT2nd
ALL SDISC
SONYHIT **S ***
CD1
First character
Playing CDs
17
GB
Playing CDs
GROUP
SPACE
ENTER
X-FADE
CUSOR
ENTER
NAME INPUT
NO DELAY
ARTIST
MODE
HIT
LIST
CHECK
–– MEGA ––
CLEAR
DISC
DEL
SCROLL
CAPS
3
DEF
6
MNO
9
WXYZ
2
ABC&!?
5
JKL
8
TUV
10/0
10
1
4
GHI
7
PQRS
CONTINUE
PROGRAM
NAME SCAN
MENU
PUSH ENTER
TRACK
PLAYER SELECT
BACK
DISC
SKIP
SHUFFLE
REPEAT
SCROLL
TRACK
H
Easy scroll
key
NAME SCAN
Number
buttons
DISC
ENTER
To locate a disc directly Z
1 Press DISC.
2 Press the number button of the disc.
Example: To enter number 35
Press 3, then 5.
05:* DISC-5*
06:* DISC-6*
07:* DISC-7*
08:* DISC-8*
CD1
2 Move the cursor to a desired disc by using
CURSOR M/m/</,.
When you press CURSOR M/m, the cursor moves
by one.
When you press CURSOR </,, the cursor
moves by ten.
3 Press CURSOR ENTER.
Note
Artist names of CD TEXT disc are not displayed. Only the
assigned Artist Names are displayed.
Locating a disc using the remote
You can locate a disc using the remote. If you have
stored the Disc Names (see page 27), you can use them
to locate a disc.
Before following the procedure below, be sure to load
the Disc Name data into the remotes memory by
following the procedure in Loading the Custom Files
into the remote on page 30.
3 Press ENTER to start play.
To locate a disc directly while observing the remotes
display Z
1 Move the cursor (B) to the desired disc by using
the Easy scroll key.
2 Press the Easy scroll key.
If the player has no disc in the slot you selected,
NO DISC!!! appears.
z When you operate the 2nd player
Follow the procedure on page 41 so that 2nd player
appears in the remotes display, then operate from the
step 1.
Notes
The Shuffle (on page 20) and Program (on page 21) Play
modes are canceled when you locate a disc using the
remote.
If the MEGA CONTROL button or the HIT LIST button is
lit, you cannot locate a disc by observing the remotes
display.
To locate a disc by scanning each Disc Name
(Name Scan) Z
You can locate a desired disc quickly by scanning the
Disc Names (see page 27) in the display.
Note that you cannot use this function in the ALL
DISCS Shuffle Play mode.
1 Press NAME SCAN.
NAME SCAN appears in the display, and the
Disc Names scroll in the display.
2 Press H when the Disc Name of the desired disc
appears.
The disc is set to the playing position, and the
player starts playing.
In Program Play mode, the disc is added to the end
of the program if you press ENTER instead of H.
Note
If NO ENTRY appears in the display, no disc has been
labeled with the Disc Name. Try the Name Scan function
again after labeling the discs.
Playing CDs
18
GB
Specifying the Next Disc to
Play
You can specify the next disc to play while playing a
disc in Continuous or 1 DISC Shuffle Play mode.
While playing a disc, turn the JOG dial. NEXT DISC
flashes in the display and the disc number or Disc
Name (see page 27) changes as you turn the JOG dial.
When the desired disc number or Disc Name appears
in the display, stop turning the JOG dial.
After the current disc is played, the next disc you have
specified starts playing.
If you want to skip to the next disc right away, push
the JOG dial while playing the current disc.
To cancel the disc you have specified
Press CONTINUE twice.
2nd PLAYER
NEXT
DISC
DISC
CDTEXT
1
CD2
GROUP
NO DELAY
MULTI
PROGRAM 1 2 3 X-FADE DELETE
CD3
REPEATSHUFFLE 1
SECSTEPMINART.
GROUPTRACK
HITART.2nd
ALL SDISC
DISC
*DISC-3 **8 ***
CD1
NEXT
Next disc number or the Disc Name
Current disc number
To locate a disc using the Disc Name data on
the remote Z
You can search for and locate a desired disc by using
the Disc Name data on the remote.
Before following the procedure below, be sure to load
the Disc Name data into the remotes memory (see
page 30).
1 Press MENU.
2 Move the cursor (B) to Name search by using
the Easy scroll key, then press the Easy scroll key.
3 Push the Easy scroll key up or down until the first
character in the Disc Name of the CD you want
appears.
Each time you push the Easy scroll key up or
down, the characters appear in the following
order.
A B C D E F G H I J K L M N O P Q R S T U V W X
Y Z 0 1 2 3 4 5 6 7 8 9
4 Press the Easy scroll key to input the character you
want.
The display shows the Disc Names starting with
the input character. The second CD players disc
numbers are displayed in reverse contrast.
If not found appears after inputting the first
character, no disc has been labeled using the input
character.
5 Move the cursor to the disc number you want to
play, then press the Easy scroll key.
Notes
Shuffle Play (on page 20) and Program Play (on page 21)
are canceled when you use this function on the remote.
The Disc Names of the 2nd player do not appear when the
player is in Artist Play (on page 36) or Group Play (on page
33) mode.
earch let ter
A
S
CD1
13:Hi techBlues
-end-
06:Hel lo
CD1
Playing CDs
19
GB
Playing CDs
Playing the Disc Just Inserted
(Easy Play)
You can play the disc that was just inserted in slot 1 by
pressing only one button.
1 Open the front cover by pressing OPEN/CLOSE.
2 Press EASY PLAY.
Slot 1 moves into loading position.
3 Insert the disc in slot 1.
4 Press EASY PLAY.
The EASY PLAY button is lit and the player starts
playing the disc in slot 1.
Note
The Easy Play function can play only the disc in slot 1.
To cancel the Easy Play function
Press x.
I / 1
OPEN/CLOSE
EASY PLAY
Playing Discs in Various Modes
(Repeat/Shuffle Play)
You can play discs or tracks repeatedly (Repeat Play)
in any play mode.
You can also have the player shuffle the tracks and
play in random order (Shuffle Play). The player
shuffles all the tracks on all discs or on the disc you
specify.
REPEAT
I / 1
SHUFFLE JOGH
GROUP
SPACE
ENTER
X-FADE
CUSOR
ENTER
NAME INPUT
NO DELAY
ARTIST
MODE
HIT
LIST
CHECK
–– MEGA ––
CLEAR
DISC
DEL
SCROLL
CAPS
3
DEF
6
MNO
9
WXYZ
2
ABC&!?
5
JKL
8
TUV
10/0
10
1
4
GHI
7
PQRS
MENU
PUSH ENTER
TRACK
PLAYER SELECT
BACK
Number
buttons
DISC
ENTER
Playing CDs
20
GB
Playing all tracks on a specified disc in
random order
1
Press SHUFFLE repeatedly until 1 DISC and
SHUFFLE appear in the display.
2 Turn the JOG dial until the desired disc number
appears in the display.
When using the remote, first press DISC, then
press the number button of the disc.
3 Press H.
1 DISC Shuffle Play starts.
appears in the display while the player is
shuffling the tracks.
To cancel Shuffle Play
Press CONTINUE.
z You can start Shuffle Play while playing
Press SHUFFLE, and Shuffle Play starts from the current
track.
z You can go to the next disc during 1 DISC Shuffle
Play Z
Press DISC SKIP +.
z You can specify the next disc to play during 1 DISC
Shuffle Play
Turn the JOG dial to specify the next disc. After all the
tracks on the current disc are played in random order,
the next disc starts playing. If you want to skip to the
next disc right away, push the JOG dial while playing the
current disc.
Notes
You cannot specify the next disc to play during ALL DISCS
Shuffle Play.
Even if you press x or turn off the player during ALL
DISCS Shuffle Play, the player remembers which discs or
tracks were played and which were not. Therefore, if you
want to start ALL DISCS Shuffle Play again from the
beginning, be sure to repeat the procedure from step 1.
To cancel Repeat Play
Press REPEAT twice.
To repeat the current track
While the track you want is being played, press
REPEAT one or more times until REPEAT 1 appears
in the display.
To cancel Repeat 1 Play
Press REPEAT.
Playing all tracks on all discs in random
order
1 Press SHUFFLE repeatedly until ALL DISCS and
SHUFFLE appear in the display.
2 Press H.
ALL DISCS Shuffle Play starts.
appears in the display while the player is
shuffling the discs or the tracks.
Note
Before you start ALL DISCS Shuffle Play, press REPEAT
repeatedly until REPEAT appears in the display.
Playing repeatedly (Repeat Play)
Press REPEAT while playing a disc.
REPEAT appears in the display. The player repeats
the discs/tracks as follows:
When the disc is played in
ALL DISCS Continuous
Play (page 13)
1 DISC Continuous Play
(page 13)
ALL DISCS Shuffle Play
(page 20)
1 DISC Shuffle Play
(page 20)
Program Play (page 21)
The player repeats
All tracks on all discs
All tracks on the current disc
All tracks on all discs in
random order
All tracks on the current disc
in random order
The same program
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92

Sony CDP-CX450 Le manuel du propriétaire

Catégorie
Lecteur CD
Taper
Le manuel du propriétaire

dans d''autres langues