Rockford Fosgate fanaticP FNP1514 Operation and Installation Manual

Marque: Rockford Fosgate

Modèle: fanaticP FNP1514

Catégorie: Haut-parleurs de voiture

Taper: Operation and Installation Manual

Ce manuel convient également à

operation & installation

FNP1414

FNP1514

FNP1614F

FNP1614

Dear Customer,

Congratulations on your purchase of the world's finest brand of car audio

speakers. At Rockford Fosgate we are fanatics about musical reproduction at

its best, and we are pleased you chose our product. Through years of engi-

neering expertise, hand craftsmanship and critical testing procedures, we

have created a wide range of products that reproduce music with all the

clarity and richness you deserve.

For maximum performance we recommend you have your new Rockford

Fosgate product installed by an Authorized Rockford Fosgate Dealer, as we

provide specialized training through Rockford Technical Training Institute

(RTTI). Please read your warranty and retain your receipt and original car-

ton for possible future use.

Great product and competent installations are only a piece of the puzzle

when it comes to your system. Make sure that your installer is using 100%

authentic installation accessories from Connecting Punch in your installa-

tion. Connecting Punch has everything from RCA cables and speaker wire

to Power line and battery connectors. Insist on it! After all, your new system

deserves nothing but the best.

To add the finishing touch to your new Rockford Fosgate image order your

Rockford wearables, which include everything from T-shirts and jackets to

hats and sunglasses.

To get a free brochure on Rockford Fosgate products and Rockford acces-

sories, in the U.S. call 480-967-3565 or FAX 480-967-8132. For all other

countries, call +001-480-967-3565 or FAX +001-480-967-8132.

If, after reading your manual, you still have questions regarding this prod-

uct, we recommend that you see your Rockford Fosgate dealer. If you need

further assistance, you can call us direct at 1-800-669-9899. Be sure to have

your serial number, model number and date of purchase available when

you call.

The serial number can be found on the outside of the box. Please record it

in the space provided below as your permanent record. This will serve as

verification of your factory warranty and may become useful in recovering

your product if it is ever stolen.

Serial Number:__________________________________

Model Number: ________________________________

PRACTICE SAFE SOUND™

CONTINUOUS EXPOSURE TO SOUND PRESSURE LEVELS

OVER

100dB MAY CAUSE PERMANENT HEARING LOSS.

HIGH POWERED AUTOSOUND SYSTEMS MAY PRODUCE

SOUND PRESSURE LEVELS WELL OVER

130dB. USE

COMMON SENSE AND PRACTICE SAFE SOUND

– 1 –

TABLE OF CONTENTS

Introduction ................................................................................................1

Package Contents........................................................................................2

Installation Considerations............................................................................3

Mounting Location ......................................................................................4

Installation..................................................................................................5

Troubleshooting ..........................................................................................8

Specifications..............................................................................................9

Warranty Information ................................................................................10

International Information ............................................................................11

INTRODUCTION

This manual provides information on the features and installation of the

fanaticP System. We suggest you save this manual for future reference. We

strongly recommend you have your Authorized Rockford Fosgate Dealer

install the fanaticP System. If you do choose to install the system yourself,

please be sure to read the entire manual before beginning.

– 2 –

PACKAGE CONTENTS

(2) FNP2401 Tweeters

Includes 3/4" [20mm] mylar dome

tweeter, flush mount housing, sur-

face mount housing, wedge mount

housing

(2) Tweeter Mounting Brackets

(4) #8-32 x .500 Screws

(8) #8 x .75 Phillips Screws

(2) .110 Female Fast-on Connectors

(2) .110 Male Fast-on Connectors

(2) FNP1404 4" Midrange Speakers

(2) 4" Speaker Grilles

(2) 4" Speaker Grille Rings

(2) FNP242x 2-Way Crossovers

(8) #8 x 1.25 Phillips Screws

(20') 18 Gauge Speaker Wire

(2) FNP2401 Tweeters

Includes 3/4" [20mm] mylar dome

tweeter, flush mount housing, sur-

face mount housing, wedge mount

housing

(2) Tweeter Mounting Brackets

(4) #8-32 x .500 Screws

(8) #8 x .75 Phillips Screws

(2) .110 Female Fast-on Connectors

(2) .110 Male Fast-on Connectors

(2) FNP1406F 6" Midrange Speakers

(2) 6" Speaker Grilles

(2) 6" Speaker Grille Rings

(2) FNP242x 2-Way Crossovers

(8) #8 x 1.25 Phillips Screws

(20') 18 Gauge Speaker Wire

(2) FNP2401 Tweeters

Includes 3/4" [20mm]

mylar dome tweeter, flush mount

housing, surface mount housing,

wedge mount housing

(2) Tweeter Mounting Brackets

(4) #8-32 x .500 Screws

(8) #8 x .75 Phillips Screws

(2) .110 Female Fast-on Connectors

(2) .110 Male Fast-on Connectors

(2) FNP1405 5-1⁄4" Midrange Speakers

(2) 5-1⁄4" Speaker Grilles

(2) 5-1⁄4" Speaker Grille Rings

(2) FNP242x 2-Way Crossovers

(8) #8 x 1.25 Phillips Screws

(20') 18 Gauge Speaker Wire

FNP1414 4" fanaticP Component System

FNP1614F 6" fanaticP Component System

FNP1514 5-1/4" fanaticP Component System

(2) FNP2401 Tweeters

Includes 3/4" [20mm] mylar dome

tweeter, flush mount housing, sur-

face mount housing, wedge mount

housing

(2) Tweeter Mounting Brackets

(4) #8-32 x .500 Screws

(8) #8 x .75 Phillips Screws

(2) .110 Female Fast-on Connectors

(2) .110 Male Fast-on Connectors

(2) FNP1406 6-1⁄2" Midrange Speakers

(2) 6-1⁄2" Speaker Grilles

(2) 6-1⁄2" Speaker Grille Rings

(2) FNP242x 2-Way Crossovers

(8) #8 x 1.25 Phillips Screws

(20') 18 Gauge Speaker Wire

FNP1614 6-1/2" fanaticP Component System

– 3 –

INSTALLATION CONSIDERATIONS

Tools Needed

The following is a list of some of the tools necessary for the installation of

your speakers.

Power Drill with assorted bits #2 Phillips Screwdriver

Tape Measure Voltmeter

General

1. For safety, disconnect the negative lead from the battery prior to begin-

ning the installation.

2. Never run wires underneath the vehicle. Running the wires inside the

vehicle provides the best protection.

3. Avoid running wires over or through sharp edges. Use rubber or plastic

grommets to protect any wires routed through metal.

4. Mount the speakers/crossovers away from electrical sources (other than

the amplifier) i.e., power cables, electronic fuel pumps, vehicle com-

puters, and other potential noise sources.

5. Mount the speakers/crossovers away from areas of extreme heat or

moisture.

Speakers

1. Make sure there is an area large enough of the speaker to mount.

Warning! Failure to do this can cause damage to the speaker if the

speaker frame is bent during installation.

2. Check to see that the location is deep enough for the speaker(s) and the

location does not interfere with the normal operation of the vehicle.

3. When mounting the speaker(s) in the door of a vehicle, make sure the

speaker(s) do not interfere with either the door or window operation.

4. When mounting the speaker(s) on the rear deck of the vehicle, check

the operation of the rear hatch or trunk lid. Make sure the torsion bars

and other moving parts are not obstructed by the speaker(s) installation.

• Please refer to the Specifications section of this manual for proper

mounting diameter and depth of the speaker(s).

Crossovers

1. Make sure there is a flat area large enough for the crossover to mount.

2. For best results, mount the crossover(s) next to the amplifier for a deco-

rative finish to the installation and provide an easy upgrade (no new

wires to run) for a bi-amp Rockford Fosgate system in the future.

– 4 –

MOUNTING LOCATION

A solid front stage with a good image is one of the most difficult tasks to

achieve in a vehicle. No car has the optimum listening environment. This

makes proper sound staging very difficult to accomplish. Most speakers

tend to be placed where they will fit easily, as opposed to where they can

perform the best. The mounting location of your speakers will have a great

effect on the sound quality of your stereo system. The special care taken to

place the speakers will yield many hours of listening enjoyment in return.

Several important recommendations should be followed.

• Place the speakers where they have a direct path to the listening area.

• For the best integration between the

midrange and tweeter, the tweeter should

be placed less than 2" from the midrange.

(Figure 1)

• If you cannot place the tweeter less than 2"

from the midrange, then place the tweeter

more than 7" from the midrange. Placing

the tweeter 2"-7" from the midrange can

cause destructive interference (frequency

response problems) which will affect the

speaker's ability to reproduce the frequency

range around the crossover frequency of the

system.

• Whenever possible, place the tweeter directly above or below the

midrange as this maximizes the imaging (point source) capability of the

speakers. (Figure 2)

Figure 1

2" or less

Figure 2-A Figure 2-B

– 5 –

• Sound radiated from a “point source” has the most optimum stereo

imaging because the separation of the acoustical centers between the

midrange and tweeter for each channel is at the optimum. Figure 2-A

describes a horizontal speaker alignment. In a closed environment such

as an automobile, horizontal speaker alignment can cause severe

amplitude and phase differences which will degrade not only the imag-

ing, but also the frequency response. This is due to the path length dif-

ferences between the midrange and tweeter. Figure 2-B displays a verti-

cal alignment between the midrange and tweeter. With a vertical align-

ment, the path length difference between the midrange and tweeter are

reduced to a minimum. The result is a negligible difference in path

lengths between the midrange and tweeter regardless of the proximity

of the listener to the speakers. Mounting the speaker with minimum

path length difference will ensure the best staging and imaging possible

from your audio system.

INSTALLATION

Mounting the Midrange

1. Cut the proper size hole for the midrange/woofer (refer to the specifica-

tions page for mounting diameter dimensions)

2. Place the midrange over the mounting hole and mark the location of

the screw mounting holes.

3. Remove the midrange. Drill the holes for the screws using a 1/8" drill

bit.

4. Route the wire through the hole.

5. Attach the wires and be sure to observe the proper speaker polarity.

6. Place the speaker into the hole and screw the speaker into place. Be

careful not to bend the speaker frame during this step.

7. Press the speaker grille into the mounting ring.

– 6 –

Flush Mount Tweeter

Tweeter

Surface Mount Tweeter

Trim

Ring

Back

Plate

Flush

Housing

Tweeter Trim

Ring

Back

Plate

Surface

Housing

Wedge Mount Tweeter

Tweeter Wedge

Housing

80Hz 500µF

100Hz 400µF

130Hz 300µF

200Hz 200µF

260Hz 150µF

400Hz 100µF

– 7 –

Negative (Black Wire)

Positive (Black/White Stripe Wire)

Midrange Negative

Tweeter Negative

Tweeter Positive

Midrange Positive

–

(One channel of amplifier)

–

(striped wir

Crossover Connections

High-Passing the Midrange

The fanaticP Component Systems are optimized for full range

music reproduction. In cases where a subwoofer is used, the

midrange can be high-passed in order to prevent overlapping

frequncies from the midrange into the subwoofer.

1. Determine the frequency range that the subwoofer will

play (i.e.: 20Hz-80Hz).

2. Use the low-pass crossover frequency of the subwoofer

system (i.e.: 80Hz) as the high-pass crossover frequency for

the midrange.

3. Select the appropriate capacitor value (i.e.: 500µF) ro prop-

erly high-pass the midrange.

4. Place the capacitor in series with the "+" terminal of the

speaker.

Midrange Negative

Midrange Positive

–

Frequency

(Hertz)

Speaker

(4 ohms)

– 8 –

TROUBLESHOOTING

Check wiring and repair or

replace as needed.

Distorted sound

from speakers

Tweeters “burn

up” easily

Engine noise

from one or

more speakers

Check for shorts in the

wiring with a volt/ohm

meter and repair or

replace wires as needed.

Re-route speaker wiring

away from noise sources.

(Refer to the Installation

Considerations section of

this manual.)

Move crossovers away

from noise sources. (Refer

to the Installation

Considerations section of

this manual.)

Speaker wires shorted

to chassis of vehicle.

Speaker wires are rout-

ed near radiated noise

source. (Power cables,

vehicle computers, etc.)

Crossover is mounted

near radiated noise

source. (Power cables,

vehicle computers, etc.)

Symptom Diagnosis Remedy

No sound from

speakers

Check and repair or

replace wiring as needed.

Check system with known

working amplifier and re-

pair or replace as needed.

Check for shorts in the wir-

ing with a volt/ohm meter

and repair or replace wires

as needed

Check system with known

working speaker and repair

or replace as needed.

Wires between amplifi-

er, crossover or speak-

ers not connected

properly.

Amplifier has no output.

Speaker wires are

shorted to each other

or to the chassis of the

vehicle.

Speakers are blown.

Excessive power from

amplifier

Equalizer in system (if

available) has exces-

sive boost in the high

frequency range

Check gain settings on

amplifier and readjust as

necessary

Check settings on equalizer

and readjust as necessary

Incorrect wiring be-

tween crossover and

speakers

– 9 –

SPECIFICATIONS

* Power Ratings (PE) is established with recommended filter network

Model FNP2401

Nominal Diameter 3/4" (20mm)

Nominal Impedance 4Ω

Frequency Response 2.8kHz-20kHz

Fs 2.8kHz

Sensitivity 91dB

RMS Power Handling 50 Watts*

Mounting Diameter See drawings

Mounting Depth See drawings

Model FNP242x

Crossover Type 2-Way

Crossover Frequency 6.3kHz @ 4Ω

Crossover Slope 18dB/octave High-Pass

Full-Range Low-Pass

Filter Q 0.707 (Butterworth)

Tweeter Protection Optical Compression

Dimensions See drawings

System Model Number FNP1414 FNP1514 FNP1614F FNP1614

Midrange Model Number FNP1404 FNP1405 FNP1406F FNP1406

Nominal Diameter 4" 5

⁄

6" 6

⁄

Nominal Impedance 4Ω 4Ω 4Ω 4Ω

Frequency Response 100Hz-8kHz 60Hz-6kHz 61Hz-6kHz 55Hz-5kHz

Fs (Hz) 100Hz 60Hz 61Hz 55Hz

Qes .907 .705 .701 .926

Qms 3.372 2.896 2.58 3.558

Qts .715 .567 .551 .733

Vas (ft

/liter) .078/2.2 .29/8.1 .335/9.5 .59/16.7

Xmax (in/mm) .09/2.4 .11/2.9 .11/2.9 .11/2.9

Sensitivity 84.9dB 86.4dB 86.8dB 87.1dB

RMS Power Handling 50 Watts 50 Watts 50 Watts 50 Watts

Mounting Diameter 90.48mm 113.50mm 127mm 139.06mm

⁄

") (4

⁄

") (5") (5

⁄

ounting Depth 48mm (1

⁄

") 60mm (2

⁄

") 61mm (2

⁄

") 63mm (2

⁄

(Specifications are subject to change without notice)

– 10 –

LIMITED WARRANTY INFORMATION

Rockford Corporation offers a limited warranty on Rockford Fosgate products on

the following terms:

• Length of Warranty

1 year on speakers 30 days on speaker B-stock (receipt required)

3 years on electronics 90 days on electronic B-stock (receipt required)

2 years on source units

• What is Covered

This warranty applies only to Rockford Fosgate products sold to consumers by

Authorized Rockford Fosgate Dealers in the United States of America or its pos-

sessions. Product purchased by consumers from an Authorized Rockford Fosgate

Dealer in another country are covered only by that country’s Distributor and not

by Rockford Corporation.

• Who is Covered

This warranty covers only the original purchaser of Rockford product purchased

from an Authorized Rockford Fosgate Dealer in the United States. In order to

receive service, the purchaser must provide Rockford with a copy of the receipt

stating the customer name, dealer name, product purchased and date of pur-

chase.

• Products found to be defective during the warranty period will be repaired or

replaced (with a product deemed to be equivalent) at Rockford's discretion.

• What is Not Covered

1. Damage caused by accident, abuse, improper operations, water, theft

2. Any cost or expense related to the removal or reinstallation of product

3. Service performed by anyone other than Rockford or an Authorized Rockford

Fosgate Service Center

4. Any product which has had the serial number defaced, altered, or removed

5. Subsequent damage to other components

6. Any product purchased outside the U.S.

7. Any product not purchased from an Authorized Rockford Fosgate Dealer

• Limit on Implied Warranties

Any implied warranties including warranties of fitness for use and merchantabil-

ity are limited in duration to the period of the express warranty set forth above.

Some states do not allow limitations on the length of an implied warranty, so this

limitation may not apply. No person is authorized to assume for Rockford Fosgate

any other liability in connection with the sale of the product.

• How to Obtain Service

Please call 1-800-669-9899 for Rockford Customer Service. You must obtain an

RA# (Return Authorization number) to return any product to Rockford Fosgate.

You are responsible for shipment of product to Rockford.

Ship to: Electronics

Rockford Corporation

Warranty Repair Department

2055 E. 5th Street

Tempe, AZ 85281

RA#:_________________

Ship to: Speakers

Rockford Acoustic Design

(Receiving-speakers)

609 Myrtle N.W.

Grand Rapids, MI 49504

RA#:_________________

– 11 –

International

Information

– 12 –

1. Corte el agujero para el medio/woofer.

2. Use los anillos de midrange como plantilla. Marque la posición de los

tornills de anclaje.

3. Quite el anillo y perfore los agujeros con una broca de 1/8".

4. Pase el cable de altavoz a través del agujero.

5. Conecte los cables observando la polaridad. Mantenga los cables aleja-

dos pe partes móviles o cortantes.

6. Asegure el altavoz en la abertura con los tornillos. Tenga la precaución

LEA DETENIDAMENTE LAS SIGUIENTES INSTRUCCIONES DE INSTA-

LACIÓN DEL PRODUCTO.

INTRODUCCIÓN

Este manual contiene información sobre la construcción, installación y fun-

cionamiento de los sistemas Fanatic X. Le recomendamos que conserve el

manual para futuras consultas.

Es preferible que la instalación de sistema Fanatic X sea realizada por un

distribuidor autorizado Rockford Fosgate. Si prefiere realizar la instalación

usted mismo, asegurese de leer el manual en su totalidad antes de comen-

zar.

MONTAJE

• Le mejor interacción entre tweeter y

medio se consigue si no están separados

entre si más de 5 cenimetros. (Figura 1)

INSTALACIÓN

Montaje del altavoz de medios

no superior a 5cm

Figura 1

– 13 –

de no doblar el marco del altavoz en este proceso.

7. Presione la rejilla en el anillo de montaje.

Español

Negativo (cable Negro)

Positivo (cable Negro con

raya Blanca

Negativo de Mediorango

Negativo Tweeter

Positivo de Agudo

Positivo de Mediorango

–

(Un canal del amplificador

–

– 14 –

VEUILLEZ LIRE LES INSTRUCITONS SUIVANTES POUR L'INSTALLATION

DE CES PRODUITS.

INTRODUCTION

Ce manuel contient des informations sur les caractéristiques et l'installation

des systèmes Fanatic X. Nous vous proposons de garder ce manuel pour

toute référence future.

Nous vous recommandons vivement de faire installaer votre système punch

Fanatic Q par un dealer agréé Rockford Fosgate. Si vous choisissez d'in-

staller le système vous même, assurez-vous de lire ce manuel entièrement

avant de commencer.

EMPLACEMENT DE MONTAGE

• Pour bénéficier d'une harmonie maximum

entre le médium et l'aigu l'éloignement

entre ces deux haut-parleurs devrait être

de moins de 5 cm entre les 2 chassis.

(Figure 1)

INSTALLATION

Montage du haut-parleur médium

1. Découper un trou adapté au haut-parleur médium/woofer.

2. Placer médium/woofer sur le trou et repérer l'emplamcement des trous

des vis.

3. Percer les trous des vis en utilisant une mèche de 3mm.

4. Faire passer les fils dans le trou central.

5. Connecter les fils au haut-parleur en respectant les polarités. Eloigner les

fils de toute partie tranchante ou mobile du véhicule.

moins de 5cm

Figure 1

– 15 –

6. Placer le haut-parleur au-dussus du trou central. Visser le haut-parleur

dans son emplacement. Faire attention à ne pas tordre le chassis du haut-

parleur durant cette étape de montage.

7. Mettre la grille dans l'anneau de montage.

Négatif (câble noire)

Positif (câble noire rayé de blanc)

Négatif du médium

Négatif de l’aigu

Positif de l’aigu

Positif du médium

–

(Un canal de l’amplificateur)

–

Français

– 16 –

DIE FOLGENDE BEDIENUNGSANLEITUNG SOLL IHNEN BEIM EINBAU

EINE HILFESTELLUNG GEBEN.

ENLEITUNG

Diese Bedienungsanleitung enthält Informationen für den Gebrauch und

Einbau des Fanatic Q Systems. Wir empfehlen, diese auch für Fragen in der

Zukunft sorgfältig aufzubewahren.

Es ist empfehlenswert, sich das Fanatic Q System von einem Autorisierten

Rockford Fosgate Fachhändler einbauen zu lassen. Sollten Sie den Einbau

jedoch selber vornehmen wollen, so empfehlen wir Ihnen, die

Bedienungsanleitung sorgfälitg zu lesen.

EINBAUORT

• Für das optimale Zusammenspiel von

Mittel- und Hochtöner, sollte der

Hochtöner niemals weiter als 5cm vorn

Mitteltöner entfernt montiert werden.

(Abb. 1)

EINBAU

Montage des Mitteltöners

Abstand max. 5cm

(Abb. 1)

1. Schneiden Sie die richtige Lochgröbe für den Mitteltöner oder Midbab

aus.

2. Setzen Sie den Mitteltöner auf das Loch und markieren Sie die Löcher für

die Schrauben.

3. Nehmen Sie den Mitteltöner wieder ab und bohren Sie dann, mit einem

passenden Bohrer, die Schraubenlöcher vor.

4. Führen Sie das Kabel durch das Loch.

– 17 –

5. Schlieben Sie die Lautsprecherkabel an. Kontrollieren Sie, ob die

Polarität stimmt. Stellen Sie sicher, dab das Lautsprecherkabel an keinen

scharfen oder sich bewegenden Teilen anliegt.

6. Plazieren Sie den Lautsprecher im Loch und befestigen Sie diesen. Seien

Sie dabei sehr vorsichtig, so dab sich der Lautsprecherkorb nicht

verzieht.

7. Drücken Sie das Lautsprechergitter im Montagering fest.

Minus (Schwarzes Kabel))

Plus (Schwarz/Weiβ

gestreiftes Kabel)

Mitteltöner Minus

Hochtöner Minus

Hochtöner Plus

Mitteltöner Plus

–

(Ein Kanal des Verstärkers)

–

Deutsch

– 18 –

LEGGERE LE ISTRUZIONI SEGUENTI PRIMA DELL'INSTALLAZIONE DEL

PRODOTTO.

INTRODUZIONE

Questo manuale fornisce informazioni sulle caratteristiche e sul instal-

lazione dei sistemi Fanatic Q. Vi suggeriamo di conservare questo manuale

come riferimento futuro.

Raccomandiamo fortemente che is sistema sia installato dal vostro rivendi-

tore Rockford Fosgate. Se scegliete di procedere con l'installazione da soli,

leggete attentamente tutto il manuale prima di proseguire.

POSIZIONAMENTO

• Per ottenere la miglior integrazione tra

tweeter e midrange, vi suggeriamo di

posizionare i due componenti a meno di 5

cm tra loro. (Figura 1)

INSTALLAZIONE

Installazione del Midrange

1. Practicate un foro del diametro corretto per il midrange/woofer.

2. Posizionate del midrange sul foro e segnate la posizione delle viti.

3. Togliete midrange e forate il pannello con una puna da 3mm.

4. Passate i cavi attraverso il foro.

5. Collegate i cave assicurandovi di osservare la corretta polarità.

Assicuratevi di mantenere i cavi lontano da parti in movimento o strut-

ture taglienti.

meno di 5 cm

Figura 1

La page charge ...

Rockford Fosgate fanaticP FNP1514 Operation and Installation Manual

Marque: Rockford Fosgate

Modèle: fanaticP FNP1514

Catégorie: Haut-parleurs de voiture

Taper: Operation and Installation Manual

Ce manuel convient également à

Télécharger le PDF

rapport

dans d''autres langues

English: Rockford Fosgate fanaticP FNP1514

Documents connexes

Autres documents

Audio Design T252-S Le manuel du propriétaire