SportsArt T645-15 Le manuel du propriétaire

T645 15” TFT LCD

Treadmill

Owner’s Manual

Sports Art Industrial Co., Ltd. ISO 9001/14001 Certied 2014.08

No. 11, Gong Huan Rd. Tainan City, Taiwan R.O.C. www.gosportsart.com

T645-15 OWNER’S MANUAL CONTENTS

1. INTRODUCTION ................................................................................ 2

2. SAFETY PRECAUTIONS .................................................................. 3

3. LIST OF PARTS ................................................................................. 7

4. ASSEMBLE THE PRODUCT ............................................................. 9

STEP 0 Preparation: Inspect the Walk Belt Placement ......................... 10

STEP 1 Install the Pedestals and Handlebar Assembly ........................ 11

STEP 2 Install the Display ..................................................................... 18

STEP 3 Move the Treadmill into Place for Use ...................................... 22

STEP 4 Level the Treadmill ................................................................... 23

STEP 5 Align the Walk Belt ................................................................... 24

STEP 6 Adjust the Walk Belt Tension .................................................... 25

STEP 7 Install the Power Cord .............................................................. 26

STEP 8 TV Terminal and Network ......................................................... 27

STEP 9 Install the TV Cable .................................................................. 28

5. UNDERSTAND THE T645-15 DISPLAY ............................................ 29

DISPLAY Overview ................................................................................ 29

DISPLAY Safety Key ............................................................................. 29

DISPLAY Keys ...................................................................................... 30

DISPLAY Windows ................................................................................ 30

DISPLAY Home Page ........................................................................... 31

6. OPERATE THE T645-15 TREADMILL .............................................. 32

OPERATION Quick Start ....................................................................... 32

OPERATION Program Selection ........................................................... 34

OPERATION Workout Programs ........................................................... 34

OPERATION Heart Rate Programs ....................................................... 38

OPERATION Fit Test Programs ............................................................. 41

OPERATION Media Selection ............................................................... 45

OPERATION User Prole ..................................................................... 46

OPERATION Default Setting ................................................................. 47

OPERATION Switching Program .......................................................... 48

OPERATION Idle Mode ........................................................................ 48

OPERATION Energy Smart Function ................................................... 48

OPERATION Error Messages ................................................................ 49

7. ABOUT HEART RATE DETECTION .................................................. 50

HEART RATE Telemetry ........................................................................ 50

HEART RATE Contact ........................................................................... 50

8. GUIDELINES FOR EXERCISE ......................................................... 51

9. ACCESSORIES .............................................................................. 52

ACCESSORIES Entertainment Cap .................................................... 53

10. MAINTENANCE .............................................................................. 54

MAINTENANCE How to Replace a Fuse .............................................. 54

MAINTENANCE Lubrication System ..................................................... 55

MAINTENANCE Schedule ..................................................................... 58

MAINTENANCE Task List ..................................................................... 59

MAINTENANCE One-Year Maintenance Log ........................................ 60

MAINTENANCE Electronics Block Diagram .......................................... 61

2

1. INTRODUCTION

Congratulations on the purchase of a high quality SportsArt product, the T645 15”

touch screen treadmill. Constructed of high quality materials and designed for years

of reliable performance, this product was made for full commercial use.

Before this product is assembled or operated, we recommend that you familiarize

yourself with this manual. Understanding the correct assembly and operation of

this product will help ensure that exercisers obtain their tness goals safely and

successfully.

3

2. SAFETY PRECAUTIONS

This product was designed and built for optimum safety. However certain precau-

tions apply during the use of this product. Please note the following safety

precautions:

• Please read the entire manual before assembly and operation. Make

sure the product is installed and operated as instructed in this manual.

• Assemble and operate the product on a solid, level surface. Do not use

outdoors or near water, including pools and saunas.

• Check the product before every use. Make sure all parts are assem-

bled, and all fasteners are tightened. Do not use the product if it is disas-

sembled in any way.

• Wear proper workout clothing. Do not wear loose clothing. Do not wear

shoes with leather soles or high heels. Tie all long hair back. Do not go

barefoot on this product.

• Keep away from moving parts. Moving parts may or may not stop imme-

diately if an object becomes caught or impedes normal motion.

• Use this product only for its intended purpose as described in this

manual.

• Be careful when mounting and dismounting the unit.

• Never operate this product if it has been damaged in any way. If it is

not working properly, or has been dropped or damaged, contact a service

technician for repairs.

• Do not use accessories that are not specically recommended by the

manufacturer. Such parts might cause injuries or cause the unit to fail.

• Keep all air ventilation areas free of blockage. Never drop or insert any

object into any opening.

• Do not operate where aerosol (spray) products are being used or where

oxygen is being administered.

• This product is not intended for use by persons (including children) with

reduced physical, sensory, or mental capabilities, or by people who are

otherwise decient in product knowledge or experience. If such people use

this product, they should be given training and be supervised at all times

by someone responsible for their safety.

• Children should be supervised to ensure that they do not play on or

near the product.

• Treadmills should be positioned away from walls to avoid injury due to

falls. Be sure that the back of the treadmill has at least six to seven feet of

clearance from a ledge, wall or window. The power supply and wiring should

be located away from walking paths or taped to prevent tripping when step-

ping on or off of the running belt.

• The user weight limit for this product is 205 kg, 450 lb. At maximum

speed, this product meets standards for users up to 150 kg, 330 lb.

4

2. SAFETY PRECAUTIONS (CONTINUED)

CAUTION: If you feel any pain or any abnormal sensations, STOP YOUR

WORKOUT and consult your physician immediately. Work within your

recommended exercise level. DO NOT work to exhaustion. Before beginning

any exercise program, you should consult with your doctor. It is recommended that

you undergo a complete physical examination.

WARNING! Heart rate monitoring systems may be inaccurate. Too much exercise

may result in serious injury or death. If you feel faint, stop exercising immediately.

Note: This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential instal-

lation. This equipment generates, uses and can radiate radio frequency energy and,

if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that inter-

ference will not occur in a particular installation. If the user desires to correct the

interference, it is at the user’s own expense.

WARNING! Only qualied technicians should be allowed to contact electrical

components such as circuit boards. Some components carry an electrical charge

even after use has been discontinued or the product has been unplugged. For

products with power cords, turn off unit power, wait ve minutes, then disconnect

the power cord from the power socket. For products without power cords, let the unit

sit without use for ve minutes. Only after taking such precautions should covers be

removed and electrical components are accessed.

• Do not attempt to drag or carry this unit by the power cord. Keep the

power cord away from heated surfaces.

• Improper grounding can increase the risk of electric shock. Check with

a qualied electrician if you are in doubt as to whether the power outlet is

properly grounded.

• Do not attempt to modify the plug provided with this product. Proper pow-

er supply must be provided. If the plug does not t an outlet, contact a quali-

ed electrician to inspect or modify power in the facility.

• Do not stand on the walk belt when starting the treadmill. Straddle the

belt with your feet on the right and left landing strips.

• Always use the safety key when operating the treadmill.

French speakers, please note the following:

• Please place the sticker (provided in the owner’s manual) on the product

as shown.

5

2. CONSIGNES DE SÉCURITÉ IMPORTANTES

Votre tapis de course SportsArt a été conçu et fabriqué afin d’assurer une sécurité

optimale. Cependant certaines précautions s’appliquent chaque fois que vous uti-

lisez votre tapis de course.

• Lisez entièrement le manuel avant l’assemblage et l’utilisation. Veuillez aussi

noter les consignes de sécurité suivantes:

• Veuillez lire attentivement les instructions et installer le tapis de course selon

les instructions.

• Assemblez et faites fonctionner l’elliptique sur une surface solide et plane; NE

PAS l’utiliser à l’extérieur ou près de l’eau.

• En aucun cas, ne laissez des enfants à proximité ou sur le tapis de course.

• Vériez le tapis de course avant chaque utilisation. Assurez-vous que toutes

les pièces sont assemblées et que tous les éléments de xation sont serrés. NE

PAS utiliser le tapis de course si l’appareil est démonté de quelque façon.

• Gardez vos mains loin des pièces mobiles.

• Portez des vêtements d’entraînement appropriés; NE PORTEZ PAS de vête-

ments amples. NE PORTEZ PAS de chaussures à semelles en cuir ou à talons

hauts. Attachez les cheveux longs. Ne marchez pas pieds nus sur l’appareil.

• Soyez prudent lors du montage et démontage de l’appareil.

• Le tapis de marche ne s’arrêtera pas immédiatement si un objet est pris dans

les courroies ou les rouleaux.

• NE PAS utiliser d’accessoire non spéciquement recommandé par le fabri-

cant. Car cela pourraient provoquer des blessures ou entraîner une panne de

l’appareil.

• Débranchez l’appareil de la prise avant l’entretien ou la suppression de toute

pièce.

• Une surveillance étroite est nécessaire quand ce tapis de course est utilisé par

ou à proximité d’enfants, de malades ou de personnes handicapées.

• Utilisez ce tapis de course uniquement pour l’usage prévu dans ce manuel.

• N’utilisez jamais ce tapis de course s’il a été endommagé de quelque façon

que ce soit. S’il ne fonctionne pas correctement, ou s’il est tombé ou endom-

magé, contactez votre vendeur.

• NE PAS transporter ce tapis de course par le cordon d’alimentation et

n’utilisez pas le cordon comme poignée.

• Maintenez le cordon éloigné de toute surface chaude.

• Veillez à ce qu’aucun orice de ventilation ne soit obstrué.

• Ne faites jamais tomber ou n’insérez jamais d’objet dans les orices.

• NE PAS l’utiliser là où des produits aérosols (vaporisés) sont utilisés ou

lorsque de l’oxygène est administré.

• La limite de poids de l’utilisateur pour ce tapis de course est de 205 kg, 450 lb.

Remarquez que la vitesse de 12 mph (20 km/h) convient jusqu’à 150 kg, 330 lb.

• Les performances du produit dépendent d’une alimentation adéquate.

• Ce tapis de course n’est pas destiné à être utilisé par des personnes (y com-

pris des enfants) dont les capacités physiques, sensorielles ou mentales sont

réduites ou qui ne disposent pas de l’expérience ou du savoir nécessaires, sauf

si celles-ci ont au préalable été formées eu égard à l’utilisation de ce tapis de

course par une personne responsable de leur sécurité.

• Les enfants doivent être encadrés an d’empêcher qu’ils ne jouent avec le

tapis de course.

• Les tapis de course doivent de préférence être situés loin des murs, pour éviter

de se blesser en cas de chute. Vérifiez si l’extrémité arrière du tapis est au moins à

2 mètres d’un rebord, d’un mur ou d’une fenêtre. Veillez également à positionner le

cordon d’alimentation loin de tout passage ou à le protéger avec du ruban adhésif

pour ne pas s’y prendre les pieds en montant et descendant du tapis.

• Utilisez toujours le clip de sûreté pendant le fonctionnement du tapis de

course.

• NE PAS rester sur le tapis de marche lors du démarrage du tapis de course.

Enjambez le tapis et placez vos pieds sur les bandes de repos droite et gauche.

6

• Pour éviter de vous blesser, restez sur les bandes de repos (barres latérales)

avant de démarrer le tapis de course.

• Ce tapis de course n’est pas destiné à être utilisé par des personnes (y com-

pris des enfants) dont les capacités physiques, sensorielles ou mentales sont

réduites ou qui ne disposent pas de l’expérience ou du savoir nécessaires, sauf

si celles-ci ont au préalable été formées eu égard à l’utilisation de ce tapis de

course par une personne responsable de leur sécurité.

• Les enfants doivent être encadrés an d’empêcher qu’ils ne jouent avec le

tapis de course.

• Utilisez toujours le clip de sûreté pendant le fonctionnement du tapis de

course.

• NE PAS rester sur le tapis de marche lors du démarrage du tapis de course.

Enjambez le tapis et placez vos pieds sur les bandes de repos droite et gauche.

• Pour éviter de vous blesser, restez sur les bandes de repos (barres latérales)

avant de démarrer le tapis de course.

ATTENTION

Si vous ressentez une douleur ou si vous avez une sensation anormale, AR-

RÊTEZ VOTRE ENTRAÎNEMENT et consultez immédiatement votre médecin.

Entraînez-vous à votre niveau d’exercice recommandé. NE PAS s’entraîner jusqu’à

l’épuisement.

• Avant de commencer un programme d’exercice, vous devriez consulter votre

médecin. Il est recommandé de faire un examen physique complet.

• NE PAS monter sur l’étape plus haute. En maintenant sur les supports de

stabilité, monter sur l’ étape plus bas.

• Pour diminuer le risque de choc électrique, débranchez toujours ce tapis de

course de la prise de courant, immédiatement après utilisation et avant le nettoy-

age.

• Un branchement incorrect du connecteur de mise à la terre de l'équipement

risque d'entraîner un choc électrique. En cas de doute sur la mise à la terre cor-

recte de l’elliptique, faites appel à un technicien ou un électricien qualié. NE

PAS modier la che fournie avec l’elliptique, si elle ne correspond pas à la prise,

faites installer une prise adéquate par un technicien qualié.

Remarque: Ce matériel a été testé et déclaré conforme aux normes des appareils

digitaux de Classe B, conformément à la partie 15 du Règlement de la FCC. Ces

limites sont conçues pour offrir une protection raisonnable contre les interférences

nuisibles dans une installation résidentielle. Cet appareil génère, utilise, et peut dif-

fuser des signaux radioélectriques, et, s’il n’est pas installé et utilisé conformément

aux instructions, peut provoquer des interférences nuisibles aux communications

radio. Cependant, il n’y a aucune garantie que des interférences ne se produiront

pas dans une installation particulière. Si l'utilisateur désire corriger les interférenc-

es, ces corrections seront à la charge de l’utilisateur

Dans ce manuel, les mots “gauche” et “droit” sont utilisés en référence aux pièces

et au produit. Comme tels, les mots “gauche” et “droit” font respectivement ré-

férence aux côtés gauche et droit de l’exerciseur. De même pour plus de conci-

sion, le mot «vis» est utilisé dans certains cas où des rondelles, des vis et autres

matériels sont associés.

2. CONSIGNES DE SÉCURITÉ (SUITE)

7

3. LIST OF PARTS

Assembly Parts

No. Name Qty. No. Name Qty.

A1 Display 1 A6a Motor right cover 1

A2 Handlebar assembly 1 A6b Motor left cover 1

A3 Right pedestal 1 A7 Left pedestal 1

A4 Feeder cord 2 A8 Owner’s manual 1

A5 Waterproof ring 2 A9 Hardware kit 1

A6 Main frame 1 A10 Power cord 1

8

Components in the Hardware Kit

No. Name Qty. Specication Notes

30 NTSC To PAL Adapter 1

31 Screw cover (curved) 2

32 Screw cover (at) 2

33

Mushroom top self tapping

screw

6 M4*L16

Screw socket 4

Spring clip 4

Fuse (Europe, etc.) 1 10A-200V-220V

Fuse (N. America) 1 15A-100V-110V

L-shaped Allen wrench 1 M4

L-shaped Allen wrench 1 M5

L-shaped Allen wrench 1 M6

T-shaped Allen wrench 1 M6

Double open-end wrench 1 22*24

Cable wrench 1

Screwdriver handle 1 green

Screwdriver shank 1 Phillips and at

Components on the Product

No. Name Specication Notes

41

Inner hex screw M8*L20

Spring washer M8

Serrated washer D18*d8.5*t2

42

Mushroom top inner hex screw M8*L20

Serrated washer (curved) D18*d8.5*t2

43

Mushroom top inner hex screw M8*L20

Serrated washer D18*d8.5*t2

44 Mushroom top inner hex screw M5*L12

45 Phillips screw M4*L8

9

4. ASSEMBLE THE PRODUCT

Follow instructions below to assemble this product. Note that in this manual

the words “left” and “right” are used to refer to the product and its parts. As

such, these designations correspond to the “left” and “right” sides of a person

in position to exercise on this product. Also, for brevity, the word “screws” is

used where screws, washers, and other hardware may be involved. And, for

clarity, names of keys are capitalized.

STEP 0 Preparation: Separate product from the Package

Follow the A, B, C sequence and lay the main frame flat on the cardboard.

(a) Remove treadmill parts. Set them aside in a safe place. Cut the corners

of the box and flatten the cardboard.

(b) Starting from the rear end, raise the main frame and remove the rear and

middle section Styrofoam.

(c) Then move to the front end, raise the main frame and remove the front

section Styrofoam.

10

STEP 0 Preparation: Inspect Walk Belt Placement

Inspect the position of the walk belt in relation to the guide rollers. The walk

belt should be in the groove of the guide rollers (image √). Make sure that the

walk belt is not outside of the groove of the guide rollers (image X).

If the walk belt is in the wrong position, press the walk belt into the groove

of the guide rollers. After making sure the walk belt is in the correct position,

adjust walk belt tension as shown in step 6.

11

STEP 1 Install the Pedestals and Handlebar assembly

Follow instructions below to install the pedestals and handlebar assembly.

The illustration below provides an overview of this step.

(a) First, remove screws (41) from pedestal mounts.

(b) Next, inspect the spring clip (A) and screw socket (B) to see if they are

in place still. If not, get them from the hardware kit and inset them in place.

12

STEP 1 Install the Pedestals and Handlebar Assy (Cont.)

Follow instructions (a through d) below to thread the data cable through the

right pedestal. Before assembly, make sure the left & right pedestals are

align with left and right sides on the main frame.

(a) Pull the cable from the right side of pedestal mount. Cut the zip tie on the

data cable, and pull the cable straight and away from the pedestal mount as

shown. Note: make sure the cable is fully pull out of the oval opening from

the pedestal mount.

(b) Place the right pedestal (A3) on the floor as shown, with the bottom end

facing the data cable. Detach the feeder cord (A4) from the base of the ped-

estal. Then tie the low end of the feeder cord onto the top of the data cable.

(c) Disconnect the feeder cord (A4) at the top of the right pedestal (A3). From

the top of the pedestal, pull the feeder cord (A4), thus threading the data

cable through the right pedestal (A3).

(d) Once the data cable has been threaded through the pedestal, untie the

feeder cord (A4) from the data cable.

(c)

(d)

(b)

(a)

13

STEP 1 Install the Pedestals and Handlebar Assy (Cont.)

Follow instructions (a through d) below to thread the data cable through the

left pedestal. Before assembly, make sure the left & right pedestals are align

with left and right sides on the main frame.

(a) Pull the cable from the left side of pedestal mount. Cut the zip tie on the

data cable, and pull the cable straight and away from the pedestal mount as

shown. Note: make sure the cable is fully pull out of the oval opening from

the pedestal mount.

(b) Place the left pedestal (A7) on the floor as shown, with the bottom end

facing the data cable. Detach the feeder cord (A4) from the base of the ped-

estal. Then tie the low end of the feeder cord onto the top of the data cable.

(Note: there are 4 data cables inside.)

(c) Disconnect the feeder cord (A4) at the top of the left pedestal (A7). From

the top of the pedestal, pull the feeder cord (A4), thus threading the data

cable through the left pedestal (A7).

(d) Once the data cable has been threaded through the pedestal, untie the

feeder cord (A4) from the data cable.

(c)

(d)

(b)

(a)

14

STEP 1 Install the Pedestals and Handlebar Assy (Cont.)

While holding the data cable to prevent it from slipping into the pedestal,

lift the top of the right pedestal (A3). Then insert the pedestal base onto its

mount. Use screws (41) to loosely secure the right pedestal (A3) into place.

Repeat the process for the left pedestal assembly. Do not fully secure ped-

estal screws yet; the pedestals should be wobbling a bit. Avoid pinching or

crimping the data cable, and prevent it from falling into the pedestal. To make

motor cover assembly easy, slide the water guard upward, above the motor

cover.

15

STEP 1 Install the Pedestals and Handlebar Assy (Cont.)

Follow the instructions (a through f) to finish install handlebar assembly.

(a) Remove screws (42, 43) from the mounting plates on the bottom of the

handlebar assembly (A2).

(b) Securely connect the left and right cables from the handlebar assembly

(A2) to the left and right pedestals (A3, A7) cables. (It is better to have 2 per-

sons doing the installation.) Note: Follow the label instruction when connect

the cable in the B area; CATV to CATV; DTV to DTV and cover the cables

with the black tube. Connect the male plug of Ethernet cable to the female

one.

(c) Place the right side of handlebar assembly (A2) into right pedestal (A3),

then place the left side into left pedestal (A7). Make sure the cable is not

shown or pinched.

16

STEP 1 Install the Pedestals and Handlebar Assy (Cont.)

(d) Put the previously removed screws (42, 43) back into the pedestals.

Tighten the screws (42) at the B area first, then tighten the screws (43) at the

C area next.

(e) Finally, press the screw covers (31, 32) into the screw heads to cover

them up.

17

STEP 1 Install the Pedestals and Handlebar Assy (Cont.)

After securing the handlebar assembly, secure screws onto the base of left

and right pedestals (area A). Put motor right and left side covers (A6a, A6b)

into place, and secure them with screws (33) and then slide the water guard

(A5) downward into place against the motor cover.

18

STEP 2 Install the Display

Follow instructions below to install the display onto the cowling. The illustra-

tion below provides an overview of this step.

19

STEP 2 Install the Display (Continued)

Please follow steps (a through f) to install the display.

(a) First, remove screws (44) from the display mount on the handlebar as-

sembly (A2).

(b) Place the display (A1) onto the handlebar assembly (A2) Note: make sure

the display is aligning with its guiding pieces to avoid damaging the control

board.

(c) Push the display (A1) slightly upward, then insert the display mounting

bottom into the opening on the handlebar assembly. Make sure the display

is place securely.

La page charge ...

SportsArt T645-15 Le manuel du propriétaire

SportsArt T645-15 Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents