Dorel Home 9930931COM Assembly Manual

Taper
Assembly Manual
9930931COM
68" Media console -Walnut
WARNING
Date of Purchase ___ / ___ / ___
Lot Number:
Do Not Return This Product!
Contact our customer service team for help first.
Call: 1-800-489-3351 (toll free)
Visit: www.ameriwoodhome.com
Assembly Difficulty Meter
Easy Tough
Contact Us!
PEOPLE NEEDED FOR ASSEMBLY: 2
ESTIMATED ASSEMBLY TIME: 1-2 HOUR
Helpful Hints
ameriwoodhome.com
Read through each step carefully and follow the proper order
Separate and count all your parts and hardware
Give yourself enough room for the assembly process
Have the following tools: Flat Head Screwdriver, #2 Phillips Head
Screwdriver and Hammer
Caution: If using a power drill or power screwdriver for screwing,
please be aware to slow down and stop when screw is tight.
Failure to do so may result in stripping the screw.
Before You Start
Cam Lock Fastening System
ameriwoodhome.com
ameriwoodhome.com
Board Identification
Not Actual Size
Top panel
T9930931010HSY Bottom panel
T9930931020HSY
C
Left side panel
T9930931030HSY
D
Right side panel
T9930931040HSY
E
Left partition
T9930931050HSY
F
Right partition
T9930931060HSY
G
Adjustable shelf
T9930931070HSY
QTY:2PCS
H
Adjustable shelf
T9930931080HSY
ameriwoodhome.com
Board Identification
Not Actual Size
I
L
Left door
T9930931090HSY
J
Right door
T9930931100HSY
QTY:2PCS
M
Back panel
T9930931120HSY
QTY:2PCS
Back rail
T9930931130HSY
K
Center back panel
T9930931110HSY
N
Front rail
T9930931140HSY
ameriwoodhome.com
Board Identification
Not Actual Size
I
Part List
Hardware Bag Reference Number:
29930931COM0HSY
Actual Size
ameriwoodhome.com
1
Ø8X30 mm
Screw
THSY2006
2
Ø4X32 mm
× 36
Screw
THSY2007
Ø4X14mm
3
× 14
Screw
THSY2009
× 32
M8X30mm
Cam bolt
THSY3007
× 6
Ø3X10mm
4
Screw
THSY2008
5
× 28 × 12
Ø3.5X12mm
6
Not Actual Size
Ø15X12 mm
Cam lock
THSY3008
× 32
Rebound device
THSY4033
× 7 × 3
Shelf support
THSY4030
× 1
Warning label
THSY4034
9× 1
Glue
THSY4001
11
Euro hinge
THSY4031
Ø35 mm
× 6
12
10 × 12
Wire clip
THSY4032
13 14 15
× 4
Ø21mm
Cam cover
THSY4028
7× 4
Cam cover
THSY4035
8
Ø21mm
Wood dowel
THSY0001
ameriwoodhome.com
STEP 1
1.1 Attach (6) to (A) as illustrated. Do NOT over-tighten.
1.2 Attach (1) to (M) & (N) as illustrated.
1
Ø8X30 mm
× 22
M8X30mm
× 8
1
1
1
1
1
1
6 11
6
6
6
6
6
6
ameriwoodhome.com
STEP 2
2.1 Attach (6) to (C), (D) & (K) as illustrated. Do NOT over-tighten.
2.2 Attach (1) to (C), (D) & (K) as illustrated.
D
K
1
Ø8X30 mm
× 10
M8X30mm
× 12 6 11
6
6
1
11
1
1
1
1
1
6
6
6
6
1
1
1
1
ameriwoodhome.com
STEP 3
1
Ø8X30 mm
× 8
3.1 Attach (14) to (E) & (F) with (4) as illustrated.
3.2 Attach (1) to (E) & (F) as illustrated.
× 6
4
Ø3.5X12mm
× 3
14
11
1
1
1
1
1
14
14
4
14
0.5in
0.33in
0.5in
0.33in
0.5in
0.33in
ameriwoodhome.com
STEP 4
× 14
Ø3X10mm
5× 7
13
4.1 Attach (O) to (B) with (13) and (5) as illustrated.
5
13
ameriwoodhome.com
STEP 5
5.1 Attach (E ) & (F) to (K) with (9) as illustrated.
Proper orientation of CAM LOCK
Ø15X12 mm
× 4
9
E
F
9
ameriwoodhome.com
STEP 6
6.1 Attach (M), (N) to (C) & (D) with (9) as illustrated.
Proper orientation of CAM LOCK
Ø15X12 mm
× 6
N
9
11
9
ameriwoodhome.com
STEP 7
7.1 Attach (A) to (C), (D) ,(M) & (N) with (9) as illustrated.
7.2 Use (8) to cover cam lock holes as illustrated.
Proper orientation of CAM LOCK
Ø15X12 mm
×16 11
9
9
9
× 4
8
8
Ø21mm
ameriwoodhome.com
STEP 8
8.1 Attach (E), (F), (K) to (A) with (9) as illustrated.
8.2 Use (7) to cover cam lock holes as illustrated.
Proper orientation of CAM LOCK
Ø15X12 mm
×6 11
9× 4
7
K
9
9
7
Ø21mm
ameriwoodhome.com
9.1 Attach (B) to sample from previous step with (2) as illustrated.
11
2
Ø4X32 mm
× 12
2
ameriwoodhome.com
STEP 9
ameriwoodhome.com
STEP 10
10.1 Attach (L) to sample as illustrated.
ameriwoodhome.com
STEP 11
11.1 Attach (12) to (I) & (J) with (3) as illustrated.
× 12
Ø4X14mm
3
Ø35 mm
× 6
12
12
3
3
12
I
J× 2
ameriwoodhome.com
STEP 12
× 24
Ø4X14mm
3
12.1 Attach (I) to (C) with (3) as illustrated.
12.2 Attach (J) to (D) & (F) with (3) as illustrated.
I
JJ
3
12
F
ameriwoodhome.com
STEP 13
A
A
B
C
Cabinet
Door
Cabinet
Door
Cabinet
Door
To adjust the vertical height.
Loosen the four screws "A" on bolt hinges. Two of them are usually in slotted
holes which allows you to adjust up of down by a few mm. then tighten back up.
Para ajustar la altura vertical
Afloje los cuatro tornillos "A" en ambas bisagras. Dos de esos están usualmente
en los agujeros llanos. Lo que significa que usted puede regular de arriba hacia
abajo. Por unos pocos milimetros. Luego apriete hacia arriba.
Pour régler la hauteur verticale.
Desserrez les quatre vis "A" sur les deux charnières. Deux d'entre elles sont
habituellement dans des fentes afin de vous permettre de les vis après
l'ajustement.
To adjust side ways.
Turning the screw "C" on BOTH hinges on each door.
Para ajustar los lados marcados
Gire los tornillos "C" de ambas bisagras en cada puerta
Pour régler latéralement.
Tournez la vis "C" sur les DEUX charnières de chaque porte.
To adjust the horizontal depth.
Loosen screw "B" and adjust door, if the door can not be adjusted, please
loosen screw "C", then try again. Tighten screw "B" and "C".
Para ajustar profundo.
Afloje los tornillos y ajuste la puerta, si la puerta no puede ser ajustada. Por
favor afloje los tornillos "C" y luego trate otra vez.
Apriete los tornillos "B" y "C"
Pour régler la profondeur.
Desserrez la vis "B" et ajustez la porte. Si la porte ne peut pas s'ajuster,
desserrez la vis "C", pui essayez de nouveau.
Serrez les vis "B" et "C".
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35

Dorel Home 9930931COM Assembly Manual

Taper
Assembly Manual

dans d''autres langues