Samsung LN32C450 Le manuel du propriétaire

LCD TV

user manual

imagine the possibilities

Thank you for purchasing this Samsung product.

To receive more complete service, please register

your product at

www.samsung.com/register

Model Serial No.

Contact SAMSUNG WORLDWIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.

Comuníquese con SAMSUNG WORLDWIDE

Si desea formular alguna pregunta o comentario en relación con los productos de Samsung, comuníquese con el centro de

atención al cliente de SAMSUNG.

Country Customer Care Center

Web Site Address

CANADA 1-800-SAMSUNG(726-7864) www.samsung.com

Samsung Electronics Canada Inc., Customer

Service 55 Standish Court Mississauga,

Ontario L5R 4B2 Canada

Samsung Electronique Canada Inc.,

Service à la Clientèle 55 Standish Court

Mississauga, Ontario L5R 4B2 Canada

U.S.A 1-800-SAMSUNG(726-7864) www.samsung.com

Samsung Electronics America, Inc.

105 Challenger Road

Ridgefield Park, NJ 07660-0511

BN68-02663B-03

BN68-02663B_Eng.indb 1 2010-03-04 �� 2:56:37

2

English

Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance.

Product design and speciﬁcations may be changed without notice.

Important Warranty Information Regarding Television Format Viewing

See the warranty card for more information on warranty terms.

✎

Wide screen format LCD Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-

motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to ﬁll the screen if your model

offers this feature and the images are constantly moving. Displaying stationary graphics and images on screen, such as the dark sidebars on

nonexpanded standard format television video and programming, should be limited to no more than 5% of the total television viewing per week.

Additionally, viewing other stationary images and text such as stock market reports, video game displays, station logos, web sites or computer

graphics and patterns, should be limited as described above for all televisions. Displaying stationary images that exceed the above guidelines

can cause uneven aging of LCD Displays that leave subtle, but permanent burned-in ghost images in the LCD picture. To avoid this, vary the

programming and images, and primarily display full screen moving images, not stationary patterns or dark bars. On LCD models that offer picture

sizing features, use these controls to view different formats as a full screen picture.

Be careful in the selection and duration of television formats used for viewing. Uneven LCD aging as a result of format selection and use, as well as

burned-in images, are not covered by your Samsung limited warranty.

SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED WARRANTY STATEMENT•

Subject to the requirements, conditions, exclusions and limitations of the original Limited Warranty supplied with Samsung Electronics

(SAMSUNG) products, and the requirements, conditions, exclusions and limitations contained herein, SAMSUNG will additionally provide

Warranty Repair Service in the United States on SAMSUNG products purchased in Canada, and in Canada on SAMSUNG products

purchased in the United States, for the warranty period originally speciﬁed, and to the Original Purchaser only.

The above described warranty repairs must be performed by a SAMSUNG Authorized Service Center. Along with this Statement, the Original

Limited Warranty Statement and a dated Bill of Sale as Proof of Purchase must be presented to the Service Center. Transportation to and

from the Service Center is the responsibility of the purchaser. Conditions covered are limited only to manufacturing defects in material or

workmanship, and only those encountered in normal use of the product.

Excluded, but not limited to, are any originally speciﬁed provisions for, in-home or on-site services, minimum or maximum repair times,

exchanges or replacements, accessories, options, upgrades, or consumables.

For the location of a SAMSUNG Authorized Service Center, please call toll-free:

In the United States : 1-800-SAMSUNG (1-800-726-7864) –

In Canada : 1-800-SAMSUNG –

Still image warning

Avoid displaying still images (such as jpeg picture ﬁles) or still image elements (such as TV channel logos, panorama or 4:3 image format, stock

or news bars at screen bottom etc.) on the screen. Constant displaying of still pictures can cause ghosting of LCD screen, which will affect image

quality. To reduce risk of this effect, please follow below recommendations:

Avoid displaying the same TV channel for long periods.•

Always try to display any image on full screen, use TV set picture format menu for best possible match.•

Reduce brightness and contrast values to minimum required to achieve desired picture quality, exceeded values may speed up the burnout •

process.

Frequently use all TV features designed to reduce image retention and screen burnout, refer to proper user manual section for details.•

Securing the Installation Space

Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation.

Failing to do so may result in ﬁre or a problem with the product due to an increase in the internal temperature of the product.

When using a stand or wall-mount, use parts provided by Samsung Electronics only.

✎

If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product falling.

x

The appearance may differ depending on the product.

✎

Installation with a stand. Installation with a wall-mount.

4inches

BN68-02663B_Eng.indb 2 2010-03-04 �� 2:56:37

3

Contents

English

ENGLISH

Getting Started

List of Features y ......................................................... 4

Accessories y .............................................................. 4

Installing the LCD TV Stand y ...................................... 4

Viewing the Control Panel y ......................................... 5

Viewing the Remote Control y ...................................... 6

Connecting to an Antenna y ........................................ 7

Plug & Play (Initial Setup) y ........................................... 7

Connections

Connecting to an AV Device y ...................................... 8

Connecting to an Audio Device y ................................. 9

Connecting to a PC y .................................................. 9

Changing the Input source y ...................................... 10

Basic Features

How to Navigate Menus y .......................................... 11

Channel Menu y ........................................................ 11

Seeing Channels 11

Using Favorite Channels 12

Memorizing channels 12

Editing channels 12

Other Features 12

Picture Menu y .......................................................... 13

Changing the Preset Picture Mode 13

Adjusting picture settings 13

Economical Solutions 14

Setting up the TV with your PC 14

Changing the Picture Options 14

Sound Menu y ........................................................... 16

Changing the Preset Sound Mode 16

Adjusting sound settings 16

Sound Settings 16

Setup Menu y ............................................................ 17

Setting the Time 17

Using the Sleep Timer 17

Setting the On/Off Time 17

Locking Programs 18

Other Features 19

Picture In Picture (PIP) 20

Support Menu y ......................................................... 21

Advanced Features

Media Play y .............................................................. 22

Connecting a USB Device 22

Screen Display 23

Playing Multiple Files 26

Media Play - Additional Functions 26

Anynet+ y ................................................................. 28

Setting Up Anynet+ 29

Switching between Anynet+ Devices 29

Recording 29

Listening through a Receiver 30

Troubleshooting for Anynet+ 30

Other Information

Installing the Wall Mount y ......................................... 31

Securing the TV to the Wall (LN32C450 Only) y ......... 32

Securing the TV to the Wall y ..................................... 33

Anti-theft Kensington Lock y ...................................... 33

Troubleshooting y ...................................................... 34

Speciﬁcations y ......................................................... 37

License 37

Dimensions y ............................................................. 38

Index y ...................................................................... 39

Check the Symbol!

t

✎

O

This function can be used by pressing the

TOOLS button on the remote control.

Note :

Important information

Step by step guide :

Informs you how to access

the menu.

MEDIA.P

P

POWER

P. M O D E

S . M O D E

SL E E P

BN68-02663B_Eng.indb 3 2010-03-04 �� 2:56:38

4

List of Features

Excellent Digital Interface & Networking: With a built-in HD digital tuner, nonsubscription HD broadcasts can be viewed y

without a cable box / STB (Set-Top-Box) satellite receiver.

Media Play y : Allows you to play music ﬁles, pictures, and movies saved on a USB device. (P. 22)

Self Diagnosis y : You can check picture and sound operation. (P. 21)

Accessories

Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer.

✎

The items' colors and shapes may vary depending on the models.

✎

Remote Control (BN59-00997A) & Batteries (AAA x 2) y

Owner’s Instructions y

Warranty Card / Safety Guide / Quick Setup Guide y

Cleaning Cloth (BN63-01798B) y

Power Cord y

TV-Holder& Screw (M6: BN96-10788C) ( y LN32C450 Only)

Installing the LCD TV Stand

Components

When installing the stand, use the provided components and parts.

Stand y Screws y

Make sure to distinguish between the front and back of the Stand and Guide Stand when assembling them.

✎

Make sure that at least two persons lift and move the LCD TV.

✎

Lay the product down, with the screen facing up and fasten the screws.

✎

Getting Started

English

1 EA

3EA (M4 X L16)

A B

2

1

B

A

(M6 X 16)

BN68-02663B_Eng.indb 4 2010-03-04 �� 2:56:39

5

01 Getting Started

English

Viewing the Control Panel

The product color and shape may vary depending on the model.

✎

P

(Power)

Turns the TV on or off.

Remote control sensor Aim the remote control towards this spot on the TV.

SOURCE

E

Toggles between all the available input sources. In the on-screen menu, use this

button as you would use the ENTER

E

button on the remote control.

MENU Displays an on-screen menu, the OSD (on screen display), of your TV’s features.

y

Adjusts the volume. In the OSD, use the

y

buttons as you would use the

◄ and ► buttons on the remote control.

z

Changes the channels. In the OSD, use the

z

buttons as you would use the

▼ and ▲ buttons on the remote control.

Power Indicator Blinks and turns off when the power is on and lights up in standby mode.

Standby mode

Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example). A small amount

of electric power is still consumed even when the power button is turned off. It is best to unplug the power cord.

Speakers

Power IndicatorRemote control sensor

BN68-02663B_Eng.indb 5 2010-03-04 �� 2:56:40

6

Getting Started

English

Viewing the Remote Control

This is a special remote control for the visually impaired persons and has Braille points on the Power, Channel,

✎

Volume buttons.

Installing batteries (Battery size: AAA)

NOTE

✎

Use the remote control within 23 feet from the TV.

x

Bright light may affect the performance of the remote

x

control. Avoid use when nearby fluorescent lights or neon

signs.

The color and shape may vary depending on the model.

x

P . MOD E

MEDIA.P

A BCD

S.M ODE

P.SIZE

SLE EP

CC

MTS

Return to the previous channel.

Display and select the available video

sources. (P. 10)

S.MODE: Selects the sound mode.

(P. 16)

SLEEP: Automatically shuts off the TV at

a preset time. (P. 17)

MTS: Press to choose stereo, mono or

Separate Audio Program (SAP

broadcast). (P. 16)

P.MODE: Selects picture mode. (P. 13)

P.SIZE: Choose the picture size. (P. 15)

CC: Controls the caption decoder. (P. 19)

Cut off the sound temporarily.

Displays Favorite Channel Lists on the

screen. (P. 12)

Press to display information on the TV

screen.

Exit the menu.

Change channels.

Displays the main on-screen menu.

Press to select additional channels

(digital) being broadcast by the same

station. For example, to select channel

‘54-3’, press ‘54’, then press '-' and ‘3’.

Press to directly access to channels.

Turns the TV on and off.

Displays the channel list on the screen.

(P. 11)

Quickly select frequently used functions.

Select on-screen menu items and

change menu values.

Return to the previous menu.

View the Media Play. (P. 22)

Buttons used in the Channel list, Media

Play menu, etc.

Adjusts the volume.

Use these buttons in the Media Play and

Anynet+ modes.

(: Controls recording on Samsung

recorders with the Anynet+ feature)

BN68-02663B_Eng.indb 6 2010-03-04 �� 2:56:40

7

01 Getting Started

English

Connecting to an Antenna

When the TV is initially powered on, basic settings proceed automatically.

Connecting the power cord and antenna.

✎

Plug & Play (Initial Setup)

When the TV is initially powered on, a sequence of on-screen prompts will assist in conﬁguring basic settings. Press the

POWER

P

button. Plug & Play is available only when the Input source is set to TV.

To return to the previous step, press the red button.

✎

1

Selecting a language

Press the ▲ or ▼ button, then press the ENTER

E

button.

Select the desired OSD (On Screen Display) language.

2

Selecting Store Demo

or Home Use

Press the ◄ or ► button, then press the ENTER

E

button.

Select the y Home Use mode. Store Demo Mode is for retail

environments.

To return the unit’s settings from y Store Demo to Home Use

(standard): Press the volume button on the TV. When you see the

volume in the OSD, press and hold MENU for 5 sec.

3

Selecting an antenna

Press the ▲ or ▼ button, then press the ENTER

E

button. Select Air, Cable or Auto.

In

✎

Cable mode, you can select the correct signal source among STD, HRC, and IRC

by pressing the ▲, ▼, ◄ or ► button, then press the ENTER

E

button.

4

Selecting a channel The channel search will start automatically.

For more information, refer to Channel → Auto Program. (P.12)

Press the

✎

ENTER

E

button at any time to interrupt the memorization process.

5

Setting the Clock

Mode

Set the Clock Mode automatically or manually.

If you select the

✎

Auto, set the daylight saving time.

Select the time zone where you live.

6

Viewing the HD

Connection Guide.

The connection method for the best HD screen quality is displayed.

7

Enjoy your TV.

Press the ENTER

E

button.

If You Want to Reset This Feature...

MENU

O m

→ Setup → Plug & Play → ENTER

E

.

VHF/UHF Antenna

or

Cable

R-AUDIO-L

P

R PB Y

ANT OUT

Power Input

MEDIA.P

P

POWER

P.MODE

S.MODE

SLEEP

Plug & Play

Time

Menu Language : English

Caption : On

Security

General

PIP : Off

Setup

BN68-02663B_Eng.indb 7 2010-03-04 �� 2:56:41

8

English

Connections

Connecting to an AV Device

Using an HDMI / DVI Cable: HD connection (up to 1080p)

We recommend using the HDMI connection for the best quality HD picture. Available devices: DVD, Blu-ray player, HD cable

box, HD satellite receiver (STB).

HDMI IN 1(DVI)

✎

, 2, 3 / PC/DVI AUDIO IN

When using an HDMI/DVI cable connection, you must use the

x

HDMI IN 1(DVI) jack for video. A DVD, Blu-ray

player, HD cable box, HD STB satellite receiver, cable box, or STB satellite receiver may require a DVI-HDMI (DVI

to HDMI) cable or DVI-HDMI (DVI to HDMI) adapter. The PC/DVI AUDIO IN jack is required for audio.

If an external device such as a DVD / Blu-ray player / cable box / satellite receiver (Set-Top Box) supporting

x

HDMI versions older than 1.3 is connected, the TV may operate abnormally (e.g. no screen display / no sound /

annoying ﬂicker / abnormal Color).

If there is no sound after connecting an HDMI cable, check the HDMI version of the external device. If you

x

suspect the version is older than 1.3, contact the provider of the device to conﬁrm the HDMI version and request

an upgrade.

It is recommended you purchase an HDMI-certiﬁed cable. Otherwise, the screen may appear blank or a connection

x

error may occur.

Using a Component Cable: (up to 1080p), Using an Audio/Video Cable: (480i only)

Available devices: DVD, Blu-ray player, cable box, STB satellite receiver, VCR

Device

R-AUDIO-L

P

R PB Y

DVI OUT

BD/DVD player/

HD cable/sat box

R-AUDIO-L

P

R PB Y

HDMI OUT

R-AUDIO-L

P

R PB Y

AUDIO OUT

When connecting to

✎

AV IN, the color

of the AV IN [Y/VIDEO] jack (Green)

does not match the color of the

video cable (Yellow).

For better picture quality, the

✎

Component connection is

recommended over the A/V

connection.

W W

B

G

RR

W

Y

Yellow Red White Red Blue Green

W

R

WY

W Y

B

G

R

W

B

G

R

Red White

W W

B

G

RR

W

Y

R-AUDIO-L

P

R PB Y

COMPONENT OUT

R-AUDIO-L

P

R PB Y

AUDIO OUT

Blu-ray player

R-AUDIO-L

P

R PB Y

VIDEO OUT

VCR

R-AUDIO-L

P

R PB Y

AUDIO OUT

BN68-02663B_Eng.indb 8 2010-03-04 �� 2:56:43

9

English

02 Connections

Connecting to an Audio Device

Using an Optical (Digital) or Audio (Analog) Cable Connection

Available devices: Digital Audio System, Ampliﬁer, Home Theater

DIGITAL AUDIO OUT (OPTICAL)

✎

When a Digital Audio System is connected to the

x

DIGITAL AUDIO OUT (OPTICAL) jack, decrease the volume

of both the TV and the system.

5.1 CH (channel) audio is available when the TV is connected to an external device supporting 5.1 CH.

x

When the receiver (home theater) is set to on, you can hear sound output from the TV’s optical jack. When the

x

TV is receiving a DTV signal, the TV will send 5.1 CH sound to the home theater receiver. When the source is

a digital component such as a DVD / Blu-ray player / cable box / STB (Set-Top-Box) satellite receiver and is

connected to the TV via HDMI, only 2 CH audio will be heard from the home theater receiver. If you want to

hear 5.1 CH audio, connect the digital audio out jack from your DVD / Blu-ray player / cable box / STB satellite

receiver directly to an amplifier or home theater.

AUDIO OUT

✎

: Connects to the audio input jacks on your amplifier/home theater.

When connecting, use the appropriate connector (sold separately).

x

When an audio amplifier is connected to the

x

AUDIO OUT jacks: Decrease the volume of the TV and adjust the

volume level with the amplifier’s volume control.

Connecting to a PC

Using an HDMI/DVI Cable / a D-sub Cable

Red White

W W

B

G

RR

W

Y

R-AUDIO-L

P

R

P

B

Y

AUDIO OUT

R-AUDIO-L

P

R

P

B

Y

DVI OUT

R-AUDIO-L

P

R

P

B

Y

PC OUT

R-AUDIO-L

P

R

P

B

Y

AUDIO OUT

R-AUDIO-L

P

R PB Y

AUDIO IN

R-AUDIO-L

P

R PB Y

OPTICAL

DVD

Home Theater

Digital audio system

BN68-02663B_Eng.indb 9 2010-03-04 �� 2:56:45

10

English

Connections

Changing the Input source

Source List

MENU

O m

→ Input → Source List → ENTER

E

Use to select TV or an external input sources

such as a DVD / Blu-ray player / cable box /

STB satellite receiver.

TV / AV / Component1 / Component2 ■

/ PC / HDMI1/DVI / HDMI2 / HDMI3

/ USB

You can only choose external

✎

devices that are connected to the TV. In the

Source List, connected inputs will be highlighted.

PC always stay activated.

✎

Edit Name

MENU

O m

→ Input → Edit Name → ENTER

E

VCR / DVD / Cable STB / Satellite STB / PVR STB / ■

AV Receiver / Game / Camcorder / PC / DVI PC / DVI

Devices / TV / IPTV / Blu-ray / HD DVD / DMA: Name

the device connected to the input jacks to make your

input source selection easier.

When connecting an HDMI/DVI cable to the

✎

HDMI IN 1(DVI) port, you should set to DVI PC or

DVI Devices mode under Edit Name.

Display Modes (D-Sub and HDMI/DVI Input)

Optimal resolution is 1360x768@60Hz.

Mode Resolution

Horizontal Frequency

(kHz)

Vertical Frequency (Hz)

Pixel Clock Frequency

(MHz)

Sync Polarity

(H/V)

IBM

640 x 350 31.469 70.086 25.175 + / -

720 x 400 31.469 70.087 28.322 - / +

MAC

640 x 480 35.000 66.667 30.240 - / -

832 x 624 49.726 74.551 57.284 - / -

VESA DMT

640 x 480

31.469 59.940 25.175 - / -

37.861 72.809 31.500 - / -

37.500 75.000 31.500 - / -

800 x 600

37.879 60.317 40.000 + / +

48.077 72.188 50.000 + / +

46.875 75.000 49.500 + / +

1024 x 768

48.363 60.004 65.000 - / -

56.476 70.069 75.000 - / -

60.023 75.029 78.750 + / +

1280 x 720 45.000 60.000 74.250 + / +

1360 x 768 47.712 60.015 85.500 + / +

VESA CVT

720 x 576 35.910 59.950 32.750 - / +

1280 x 720 56.456 74.777 95.750 - / +

VESA GTF 1280 x 720 52.500 70.000 89.040 - / +

NOTE

✎✎

For HDMI/DVI cable connection

x

, you must use the HDMI IN 1(DVI) jack.

The interlace mode is not supported.

x

The set might operate abnormally if a non-standard video format is selected.

x

Separate and Composite modes

x

are supported. SOG(Sync On Green) is not supported.

EX-LINK

Connector for service only.

Input Cables (Sold Separately)

HDMI HDMI-DVI Component Composite (AV) Coaxial (RF) VGA

MEDIA.P

P

POWER

P.MODE

S.MODE

SLEEP

BN68-02663B_Eng.indb 10 2010-03-04 �� 2:56:47

11

English

03 Basic Features

How to Navigate Menus

Before using the TV, follow the steps below to learn how

to navigate the menu in order to select and adjust different

functions.

P

.MO D

E

M

EDIA.

P

A

B

C

D

S

.M

O

DE

P

.SI Z

E

S

R

S

CC

M

T

S

1

2

3

4

1 MENU button: Display the main on-screen menu.

2 ENTERE / Direction button: Move the cursor and

select an item. Conﬁrm the setting.

3 RETURN button: Return to the previous menu.

4 EXIT button: Exit the on-screen menu.

How to operate the OSD (On Screen Display)

The access step may differ depending on the selected menu.

1

MENU m

The main menu options appear the

screen.

Picture, Sound, Channel, Setup,

Input, Application, Support.

2

▲ / ▼

Select an icon with the ▲ or ▼

button.

3

ENTER E

Press ENTERE to access the

sub-menu.

4

▲ / ▼

Select the desired submenu with the

▲ or ▼ button.

5

◄ / ►

Adjust the value of a particular

item with the ◄ or ► button.

The adjustment OSD may differ

depending on the selected menu.

6

ENTER E

Press ENTERE to conﬁrm the

selection.

7

EXIT e

Press EXIT to exit.

Channel Menu

Seeing Channels ¦

Channel List

MENU

O m

→ Channel → Channel List → ENTER

E

Add, delete or set Favorite channels and use

the program guide for digital broadcasts.

Select a channel in the All Channels, Added

Channels, Favorite or Programmed screen

by pressing the ▲ / ▼ buttons, and pressing

the ENTER

E

button. Then you can watch

the selected channel.

■ All Channels: Shows all currently available

channels.

■ Added Channels: Shows all added channels.

*

■ Favorite: Shows all favorite channels.

■ Programmed: Shows all currently reserved

programs.

Using the color buttons with the

✎

Channel List

ABCD

x

Red (Antenna): Switches to Air or Cable.

ABCD

x

Green (Zoom): Enlarges or shrinks a channel

number.

ABCD

x

Yellow (Select): Selects multiple channel lists.

Select desired channels and press the Yellow button

to set all the selected channels at the same time. The

c

mark appears to the left of the selected channels.

x

(Page): Move to next or previous page.

T

x

(Tools): Displays the Channel List option menu.

(The Options menus may differ depending on the

situation.)

Channel Status Display Icons

Icons Operations

c

A channel selected.

*

A channel set as a Favorite.

)

A reserved Program.

(

A program currently being broadcast.

Basic Features

MEDIA.P

P

POWER

P.MO DE

S. MODE

SLEE P

Added Channels

6 Air

6-1 ♥ TV #6

7 Air

8 Air

9 Air

9-1 ♥ TV #9

10 Air

10-1 ♥ TV #10

11-1 ♥ TV #11

Air

A

Antenna

B

Zoom

C

Select Page T Tools

BN68-02663B_Eng.indb 11 2010-03-04 �� 2:56:48

12

English

Basic Features

Using Favorite Channels ¦

MENU

O m

→ Channel → Channel List → ENTER

E

*

Add to Favorite / Delete from Favorite

t

Set channels you watch frequently as

Favorites.

1. Select a channel and press the TOOLS

button.

2. Add or delete a channel using the Add to

Favorite or Delete from Favorite menu

respectively.

Memorizing channels ¦

MENU

O m

→ Channel → ENTER

E

Antenna (Air / Cable)

t

Before your television can begin memorizing the available

channels, you must specify the type of signal source that is

connected to the TV (i.e. an Air or a Cable system).

Auto Program

Air ■ : Air antenna signal.

Cable ■ : Cable antenna signal.

Auto ■ : Air and Cable antenna.

NOTE

✎

When selecting the Cable TV system: Selects the

x

cable system. STD, HRC and IRC identify various

types of cable TV systems. Contact your local cable

company to identify the type of cable system that

exists in your particular area. At this point, the signal

source has been selected.

After all the available channels are stored, it starts

x

to remove scrambled channels. The Auto program

menu then reappears.

How to Stop Auto Programming

1. Press the ENTER

E

button.

2. A message will ask Stop Auto Program? Select Yes by

pressing the ◄ or ► button.

3. Press the ENTER

E

button.

Editing channels ¦

MENU

O m

→ Channel → Channel List → ENTER

E

Channel Name Edit

t

1. Select a channel and press the TOOLS button.

2. Edit the channel name using the Channel Name Edit

menu.

Channel Name Edit ■ (analog channels only): Assign your

own channel name.

Other Features ¦

MENU

O m

→ Channel → ENTER

E

Clear Scrambled Channel

This function is used to ﬁlter out scrambled channels after

Auto Program is completed. This process may take up to

20~30 minutes.

How to Stop Searching Scrambled Channels

1. Press the ENTER

E

button to select Stop.

2. Press the ◄ button to select Yes.

3. Press the ENTER

E

button.

This function is only available in

✎

Cable mode.

Channel List

MENU

O m

→ Channel → Channel List → ENTER

E

Channel List Option Menu

t

Set each channel using the Channel List menu options (Add/

Delete, Timer Viewing, Select All/ Deselect All). Option

menu items may differ depending on the channel status.

1. Select a channel and press the TOOLS button.

2. Select a function and change its settings.

Add / Delete ■ : Delete or add a channel to display the

channels you want.

NOTE

✎

All deleted channels will be shown on the

x

All

Channels menu.

A gray-colored channel indicates the channel

x

has been deleted.

The

x

Add menu only appears for deleted

channels.

Delete a channel from the

x

Added Channels or

Favorite menu in the same manner.

Added Channels

6 Air

6-1 ♥ TV #6

7 Air

8 Air

9 Air

9-1 ♥ TV #9

10 Air

10-1 ♥ TV #10

11-1 ♥ TV #11

Air

A

Antenna

B

Zoom

C

Select Page T Tools

Delete

Add to Favorite

Timer Viewing

Channel Name Edit

Select All

MEDIA.P

P

POWER

P.MODE

S.MODE

SLEEP

BN68-02663B_Eng.indb 12 2010-03-04 �� 2:56:48

13

English

03 Basic Features

Timer Viewing ■ : You can set a desired channel to be

displayed automatically at the set time; even when you

are watching another channel. Set the current time ﬁrst

to use this function. (P. 17)

1. Press the ◄ / ► /▲ / ▼ buttons to select the

desired channel in Channel List.

2. Press the TOOLS button, then select Timer Viewing.

3. Scroll up or down to adjust the settings in the box,

or use the numeric buttons on your remote for

entering the date and time.

If you selected

✎

Once, Every Week or Every Day

in Repeat, you can enter the date you want.

4.

Select OK, then press the ENTERE button when done.

NOTE

✎

Only memorized channels can be reserved.

x

Reserved programs will be displayed in the

x

Programmed menu.

When a digital channel is selected, press the

x

►

button to view the digital program.

Select All ■ : Select all the channels in the channel list.

Deselect All ■ : Deselect all the selected channels.

You can only select

✎

Deselect All when one or

more channels are selected.

Programmed

(in Channel List)

You can view, modify or delete a show you have reserved to

watch.

1. Press the

ENTERE

button to select Channel List.

2. Press the ◄ and ▼ button move to the Programmed

menu.

Change Info ■ : Change a show you have reserved to watch.

Cancel Schedules ■ : Cancel a show you have reserved to

watch.

Information ■ : Display a show you have reserved

to watch. (You can also change the reservation

Information.)

Select All / Deselect All: ■ You can select or deselect all

channels in the channel list.

Fine Tune

(analog channels only)

If the reception is clear, you do not have to ﬁne tune the

channel, as this is done automatically during the search and

store operation. If the signal is weak or distorted, ﬁne tune

the channel manually.

Select y Fine Tune in the Channel menu.

Fine tuned channels that have been saved are marked

✎

with an asterisk “*” on the right-hand side of the

channel number in the channel banner.

To reset the fine-tuning, select

✎

Reset.

Picture Menu

Changing the Preset Picture Mode ¦

MENU

O m

→ Picture → Mode → ENTER

E

Mode

t

Select your preferred picture type by

pressing the P.MODE button.

Dynamic ■ : Suitable for a bright room.

Standard ■ : Suitable for a normal

environment.

Movie ■ : Suitable for watching movies in

a dark room.

Adjusting picture settings ¦

MENU

O m

→ Picture → Backlight → ENTER

E

Backlight / Contrast / Brightness /

Sharpness / Color / Tint (G/R)

Your television has several setting options for picture quality

control.

NOTE

✎

When you make changes to

x

Backlight, Contrast,

Brightness, Sharpness, Color or Tint (G/R), the

OSD will be adjusted accordingly.

In PC mode, you can only make changes to

x

Backlight, Contrast and Brightness.

Settings can be adjusted and stored for each

x

external device connected to the TV.

Lowering picture brightness reduces power

x

consumption.

MEDIA.P

P

POWER

P.MODE

S.MODE

SLEEP

BN68-02663B_Eng.indb 13 2010-03-04 �� 2:56:49

14

English

Basic Features

Economical Solutions ¦

ECO Solution

MENU

O m

→ Picture → ECO Solution → ENTER

E

Energy Saving (Off / Low / Medium / High / ■

Picture Off / Auto): This adjust the brightness of the

TV in order to reduce power consumption. If you select

Picture Off, the screen is turned off , but the sound

remains on. Press any button to turn on the screen

again.

No Signal Power Off (Off / 15 min. / 30 min. / 60 min.) ■

Sets how quickly the TV switches to standby mode, if no

picture is being received.

Disabled when the PC is in power saving mode.

✎

Setting up the TV with your PC ¦

Set the input source to PC.

Auto Adjustment

t

MENU

O m

→ Picture → Auto Adjustment →

ENTER

E

Adjust frequency values/positions and ﬁne tune the settings

automatically.

Not available when connecting through HDMI/DVI

✎

cable.

Screen

Coarse / Fine: ■ Removes or reduces picture noise. If the

noise is not removed by Fine-tuning alone, then adjust

the frequency as best as possible (Coarse) and Fine-

tune again. After the noise has been reduced, readjust

the picture so that it is aligned to the center of screen.

Position: ■ Adjust the PC’s screen positioning if it does

not ﬁt the TV screen. Press the ▲ or ▼ button to adjust

the Vertical-Position. Press the ◄ or ► button to adjust

the Horizontal-Position.

Image Reset: ■ Resets the image to default settings.

Using Your TV as a Computer (PC) Display

Setting Up Your PC Software (Based on Windows XP)

Depending on the version of Windows and the video card,

the actual screens on your PC will probably look different, but

the same basic set-up information will apply in most cases.

(If not, contact your computer manufacturer or Samsung

Dealer.)

1. Click on “Control Panel” on the Windows start menu.

2. Click on “Appearance and Themes” in the “Control

Panel” window and a display dialog-box will appear.

3. Click on “Display” and a display dialog box will appear.

4. Navigate to the “Settings” tab on the display dialog-box.

The correct size setting (resolution) y

[Optimum: 1360x768 pixels]

If a vertical-frequency option exists on your display y

yysettings dialog box, the correct value is ‘60’ or ‘60 Hz’.

Otherwise, just click ‘OK’ and exit the dialog box.

Changing the Picture Options ¦

Advanced Settings

MENU

O m

→ Picture → Advanced Settings →

ENTER

E

(available in Standard / Movie mode)

Compared to previous models, new Samsung TVs have a

more precise picture.

In PC mode, you can only make changes to

✎

Dynamic

Contrast, Gamma and White Balance.

Black Tone (Off / Dark / Darker / Darkest) ■ : Select the

black level to adjust the screen depth.

Dynamic Contrast (Off / Low / Medium / High) ■ :

Adjust the screen contrast.

Shadow Detail ■ : Increase the brightness of dark images.

Disabled under PC mode.

✎

Gamma ■ : Adjust the primary color intensity.

RGB Only Mode (Off / Red / Green / Blue) ■ :

Displays the Red, Green and Blue color for making ﬁne

adjustments to the hue and saturation.

Color Space (Auto / Native) ■ : Adjust the range of colors

available to create the image.

White Balance ■ : Adjust the color temperature for a more

natural picture.

R-Offset / G-Offset / B-Offset: Adjust each color's

(red, green, blue) darkness.

R-Gain / G-Gain / B-Gain : Adjust each color's (red,

green, blue) brightness.

Reset: Resets the White Balance to it's default

settings.

Flesh Tone ■ : Emphasize pink "flesh tone".

Edge Enhancement (Off / On) ■ : Emphasize object

boundaries.

Advanced Settings

Black Tone : Off ►

Dynamic Contrast : Medium

Shadow Detail : 0

Gamma : 0

RGB Only Mode : Off

Color Space : Native

White Balance

▼

U Move E Enter R Return

BN68-02663B_Eng.indb 14 2010-03-04 �� 2:56:49

15

English

03 Basic Features

Picture Options

MENU

O m

→ Picture → Picture Options →

ENTER

E

In PC mode, you can only make changes to the

✎

Color

Tone, Size and Auto Protection Time.

Color Tone (Cool / Normal / Warm1 / Warm2) ■

Warm1

✎

or Warm2 will be deactivated when the

picture mode is Dynamic.

Settings can be adjusted and stored for each

✎

external device connected to an input on the TV.

Size ■ : Your cable box/satellite receiver

may have its own set of screen sizes as

well. However, we highly recommend

you use 16:9 mode most of the time.

16:9: Sets the picture to 16:9 wide

mode.

Zoom1: Use for moderate magniﬁcation.

Zoom2: Use for a stronger magniﬁcation.

Wide Fit: Enlarges the aspect ratio of the picture to ﬁt

the entire screen.

4:3: Sets the picture to basic (4:3) mode.

Do not watch in 4:3 format for a long time. Traces

✎

of borders displayed on the left, right and center

of the screen may cause image retention (screen

burn) which are not covered by the warranty.

Screen Fit: Displays the full image without any cut-off

when HDMI (720p / 1080i / 1080p) or Component

(1080i / 1080p) signals are input.

NOTE

✎

After selecting

x

Zoom1, Zoom2 or Wide Fit:

1. Press the ► button to select Position.

2. Press the ENTER

E

button.

3. Press the ▲ or ▼ button to move the picture up

or down.

4. Press the ENTER

E

button.

5. Press the ► button to select Reset.

6. Press the ENTER

E

button to reset the picture

to its default position.

After selecting

x

Screen Fit in HDMI (1080i/1080p) or

Component (1080i/1080p) mode, you may need to

center the picture:

1. Press the ◄ or ► button to select Position.

2. Press the ENTER

E

button.

3. Press the ▲, ▼, ◄ or ► button to move the

picture.

4. Press the ENTER

E

button.

5. Press the ◄ or ► button to select Reset.

6. Press the ENTER

E

button.

HD (High Definition): 16:9 - 1080i/1080p (1920x1080),

x

720p (1280x720)

Settings can be adjusted and stored for each

x

external device you have connected to an input on

the TV.

Input Source Picture Size

ATV, AV,

Component (480i, 480p)

16:9, Zoom1,

Zoom2, 4:3

DTV(1080i),

Component (1080i, 1080p),

HDMI (720p, 1080i, 1080p)

16:9, 4:3, Wide Fit,

Screen Fit

PC 16:9, 4:3

Digital Noise ■

Filter (Off / Low / Medium / High / Auto

/ Auto Visualization):

If the broadcast signal received by

your TV is weak, you can activate the Digital Noise Filter

feature to reduce any static and ghosting that may appear

on the screen.

When the signal is weak, try other options until the

✎

best picture is displayed.

Auto Visualization: When changing analog channels,

displays signal strength.

Only available for analog channels.

✎

When bar is green, you are receiving the best

✎

possible signal.

MPEG Noise Filter (Off / Low / Medium / High / ■

Auto): Reduces MPEG noise to provide an improved

picture quality.

Disabled under PC mode.

✎

HDMI Black Level (Normal / Low) ■ : Selects the black

level on the screen to adjust the screen depth.

Available only in HDMI mode (RGB signals).

✎

MEDIA.P

P

POWER

P.MODE

S.MODE

SLEEP

Picture Options

Color Tone : Normal ►

Size : 16:9

Digital Noise Filter : Auto

MPEG Noise Filter : Auto

HDMI Black Level : Normal

Film Mode : Off

Auto Protection Time : 2 hours

U Move E Enter R Return

BN68-02663B_Eng.indb 15 2010-03-04 �� 2:56:49

16

English

Basic Features

Film Mode (Off / Auto1 / Auto2) ■ : Sets the TV to

automatically sense and process ﬁlm signals from all

sources and adjusts the picture for optimum quality.

Available in TV, AV, COMPONENT (480i / 1080i)

✎

and HDMI (480i / 1080i).

Auto Protection Time (2 hours / 4 hours / 8 hours ■

/ 10 hours / Off): If the screen remains idle with a still

mage for a certain period of time deﬁned by the user,

the screen saver is activated to prevent the formation of

ghost images on the screen.

Picture Reset (OK / Cancel)

Resets your current picture mode to its default settings.

Sound Menu

Changing the Preset Sound Mode ¦

MENU

O m

→ Sound → Mode → ENTER

E

Mode

t

Standard ■ : Selects the normal sound

mode.

Music ■ : Emphasizes music over voices.

Movie ■ : Provides the best sound for

movies.

Clear Voice ■ : Emphasizes voices over

other sounds.

Amplify ■ : Increase the intensity of high-frequency sound

to allow a better listening experience for the hearing

impaired.

Adjusting sound settings ¦

MENU

O m

→ Sound → Equalizer → ENTER

E

Equalizer

Adjusts the sound mode.

Balance L/R ■ : Adjusts the balance between the right and

left speaker.

100Hz / 300Hz / 1KHz / 3KHz / 10KHz ■ (Bandwidth

Adjustment): Adjusts the level of speciﬁc bandwidth

frequencies.

Reset ■ : Resets the equalizer to its default settings.

Sound Settings ¦

Virtual Surround (Off / On)

(standard sound mode only)

This function provides a virtual 5.1 channel surround sound

experience through a pair of speakers or headphones using

HRTF (Head Related Transfer Function) technology.

Dialog Clarity (Off / On)

(standard sound mode only)

Dialog Clarity emphasizes voice while maintaining the

background sound level.

Preferred Language

(digital channels only)

Digital-TV broadcasts are capable of

simultaneous transmission of many

audio tracks (for example, simultaneous

translations of the program into foreign

languages).

You can only select a language among

✎

the ones being broadcasted.

Multi-Track Sound (MTS)

(analog channels only)

Mono ■ : Choose for channels that are

broadcasting in mono or if you are

having difﬁculty receiving a stereo signal.

Stereo ■ : Choose for channels that are

broadcasting in stereo.

SAP ■ : Choose to listen to the Separate

Audio Program, which is usually a foreign-language

translation.

Depending on the particular program being broadcast,

✎

you can listen to Mono, Stereo or SAP.

Auto Volume (Off / Normal / Night)

To equalize the volume level on each channel, set to Normal.

Night ■ : This mode provides an improved sound

experience compared to Normal mode, making almost

no noise. It is useful at night.

MEDIA.P

P

POWER

P.MODE

S.MODE

SLEEP

MEDIA.P

P

POWER

P.MODE

S.MODE

SLEEP

MEDIA.P

P

POWER

P.MODE

S.MODE

SLEEP

BN68-02663B_Eng.indb 16 2010-03-04 �� 2:56:50

17

English

03 Basic Features

Speaker Select

(External Speaker / TV Speaker)

A sound echo may occur due to a difference in decoding

speed between the main speaker and the audio receiver. In

this case, set the TV to External Speaker.

When

✎

Speaker Select is set to External Speaker, the

volume and MUTE buttons will not operate and the

sound settings will be limited.

When

✎

Speaker Select is set to External Speaker, you

should use these settings.

TV Speaker: Off, External Speaker: On

x

When

✎

Speaker Select is set to TV Speaker, you

should use these settings.

TV Speaker: On, External Speaker: On

x

If there is no video signal, both speakers will be mute.

✎

SPDIF Output

SPDIF (Sony Philips Digital Interface) is used to provide digital

sound, reducing interference going to speakers and various

digital devices such as an A/V Receiver/Home theater.

Audio Format: ■ During the reception of a digital TV

broadcast, you can select the Digital Audio output

(SPDIF) format from the options PCM or Dolby Digital.

By connecting to 5.1ch speakers in a dolby

✎

digital setup, maximize your interactive 3D sound

experience.

Audio Delay ■ : Correct audio-video sync problems, when

watching TV or video, and when listening to digital audio

output using an external device such as an AV receiver

(0ms ~ 250ms).

Sound Reset

Reset all sound settings to the factory defaults.

Setup Menu

Setting the Time ¦

MENU

O m

→ Setup → Time → ENTER

E

Time

The current time will appear every time you press the

✎

INFO button.

Clock ■ : Setting the clock is for using various timer

features of the TV.

If you disconnect the power cord, you have to set

✎

the clock again.

Clock Mode: Set up the current time manually or

automatically.

Auto – : Set the current time automatically using the

time from a digital channel.

The antenna must be connected in order to set

✎

the time automatically.

Manual – : Set the current time manually.

Depending on the broadcast station and signal,

✎

the auto time set up may not be correct. In this

case, set the time manually.

Clock Set: Set the Month, Day, Year, Hour, Minute

and am/pm.

Available only when

✎

Clock Mode is set to

Manual.

You can set the month, day, year, hour and minute

✎

directly by pressing the number buttons on the

remote control.

DST (Daylight Saving Time) (Off / On): Switches the

Daylight Saving Time function on or off.

This function is only available when the

✎

Clock

Mode is set to Auto.

Time Zone: Select your time zone.

This function is only available when the

✎

Clock

Mode is set to Auto.

Using the Sleep Timer ¦

MENU

O m

→ Setup → Time → Sleep Timer →

ENTER

E

Sleep Timer ■

t

: Automatically

shuts off the TV after a preset period

of time. (30, 60, 90, 120, 150 and 180

minutes).

To cancel the

✎

Sleep Timer, select

Off.

Setting the On/Off Time ¦

MENU

O m

→ Setup → Time → Timer 1 →

ENTER

E

Timer 1 / Timer 2 / Timer 3 ■ : Three different on / off

timer settings can be made. You must set the clock ﬁrst.

MEDIA.P

P

POWER

P.MODE

S.MODE

SLEEP

Timer 1

L Move U Adjust E Enter R Return

On Time

Off Time

Volume Source Antenna Channel

Repeat

Sun Mon Tue Wed Thu Fri Sat

Inactivate 12 00 am

10 TV Air 3

Once

▲

▼

BN68-02663B_Eng.indb 17 2010-03-04 �� 2:56:50

18

English

Basic Features

On Time / Off Time: Set the hour, minute, am/pm

and activate / inactivate. (To activate the timer with the

setting you have chosen, set to Activate.)

Volume: Set the desired volume level.

Source: Select TV or USB content to be played when

the TV is turned on automatically. (USB can be selected

only when a USB device is connected to the TV)

Antenna (when Source is set to TV): Select Air or

Cable.

Channel (when the Source is set to TV): Select the

desired channel.

Contents (when the Source is set to USB): Select a

folder in the USB device containing music or photo ﬁles

to be played when the TV is turned on automatically.

If there is no music file on the USB device or the

✎

folder containing a music file is not selected, the

Timer function does not operate correctly.

When there is only one photo file in the USB, the

✎

Slide Show will not play.

If a folder name is too long, the folder cannot be

✎

selected.

Each USB you use is assigned its own folder.

✎

When using more than one of the same type of

USB, make sure the folders assigned to each USB

have different names.

Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat,

Sat~Sun or Manual to set at you convenience. If you

select Manual, you can set up the day you want to

activate the timer.

The

✎ c

mark indicates the day is selected.

Auto Power Off (available only when the TV is turned

✎

on by the Timer): The TV will be automatically turned off

after 3 hours of being left idle to prevent overheating.

Locking Programs ¦

MENU

O m

→ Setup → Security → ENTER

E

Security

The PIN input screen appears, Enter your 4 digit PIN number.

V-Chip ■ : The V-Chip feature automatically locks out

programs that are deemed inappropriate for children.

The user must enter a PIN (personal identiﬁcation

number) before any of the V-Chip restrictions are set up

or changed.

NOTE

✎

V-Chip

x

is not available in HDMI, Component

or PC mode.

The default PIN number of a new TV set is

x

“0-0-0-0”.

Allow all

x

: Press to unlock all TV ratings.

Block all

x

: Press to lock all TV ratings.

V-Chip Lock (Off / On): You can block rated TV

Programs.

TV Parental Guidelines: You can block TV programs

depending on their rating. This function allows you to

control what your children are watching.

TV-Y – : Young children / TV-Y7: Children 7 and over /

TV-G: General audience / TV-PG: Parental guidance /

TV-14: Viewers 14 and over / TV-MA: Mature

audience

ALL – : Lock all TV ratings. / FV: Fantasy violence /

V: Violence / S: Sexual situation / L: Adult Language /

D: Sexually Suggestive Dialog

The V-Chip will automatically block certain

✎

categories dealing with more sensitive material.

For example, if you block the TV-Y category,

then TV-Y7 will automatically be blocked.

Similarly, if you block the TV-G category, then

all the categories in the young adult group will

be blocked (TV-G, TV-PG, TV-14 and TV-MA).

The sub-ratings (D, L, S, V) work similarly. So,

if you block the L sub-rating in TV-PG, then

the L sub-ratings in TV-14 and TV-MA will

automatically be blocked.

MPAA Rating: You can block movies depending on

their MPAA rating. The Motion Picture Association of

America(MPAA) has implemented a rating system that

provides parents or guardians with advanced information

on which ﬁlms are appropriate for children.

G – : General audience (no restrictions). / PG: Parental

guidance suggested. / PG-13: Parents strongly

cautioned. / R: Restricted. Children under 17 should

be accompanied by an adult. / NC-17: No children

under age 17. / X: Adults only. / NR: Not rated.

The

✎

V-Chip will automatically block any

category that deals with more sensitive material.

For example, if you block the PG-13 category,

then R, NC-17 and X will automatically be

blocked.

Canadian English: You can block TV programs

depending on their Anglophone Canadian.

C – : Programming intended for children under age 8. /

C8+: Programming generally considered acceptable

for children 8 years and over to watch on their own. /

G: General programming, suitable for all audiences. /

PG: Parental Guidance. / 14+: Programming

contains themes or content which may not be

suitable for viewers under the age of 14. / 18+: Adult

programming.

The

✎

V-Chip will automatically block any

category that deals with more sensitive material.

For example, if you block the G category, then

PG, 14+ and 18+ will automatically be blocked.

BN68-02663B_Eng.indb 18 2010-03-04 �� 2:56:50

19

English

03 Basic Features

Canadian French: You can block TV programs

depending on their French Canadian rating.

G – : General / 8 ans+: Programming generally

considered acceptable for children 8 years and over

to watch on their own. / 13 ans+: Programming may

not be suitable for children under the age of 13. /

16 ans+: Programming is not suitable for children

under the age of 16. / 18 ans+: Programming

restricted to adults.

The

✎

V-Chip will automatically block any

category that deals with more sensitive material.

For example, if you block the 8 ans+ category,

then 13 ans+, 16 ans+ and 18 ans+ will

automatically be blocked also.

Downloadable U.S. Rating: Parental restriction

information can be used while watching DTV channels.

NOTE

✎

If information is not downloaded from the

x

broadcasting station, the Downloadable U.S.

rating menu is deactivated.

Parental restriction information is automatically

x

downloaded while watching DTV channels. It

may take several seconds.

The

x

Downloadable U.S. rating menu

is available for use after information is

downloaded from the broadcasting station.

However, depending on the information from

the broadcasting station, it may not be available

for use.

Parental restriction levels differ depending on

x

the broadcasting station. The default menu

name and Downloadable US rating change

depending on the downloaded information.

Even if you set the on-screen display to another

x

language, the Downloadable U.S. Rating

menu will appear in English only.

The rating will automatically block certain

x

categories that deal with more sensitive

material.

The rating titles (For example: Humor Level..etc)

x

and TV ratings (For example: DH, MH, H..etc)

may differ depending on the broadcasting

station.

Change PIN ■ : The Change PIN screen will appear.

Choose any 4 digits for your PIN and enter them. As

soon as the 4 digits are entered, the Conﬁrm New

PIN screen appears. Re-enter the same 4 digits. When

the Conﬁrm screen disappears, your PIN has been

memorized.

How to watch a restricted channel

If the TV is tuned to a restricted channel, the V-Chip

will block it. The screen will go blank and the following

message will appear:

This channel is blocked by V-Chip. Please enter the

PIN to unblock.

If you forget the PIN, press the remote-control

✎

buttons in the following sequence, which resets

the pin to “0-0-0-0” : POWER (off) → MUTE → 8

→ 2 → 4 → POWER (on).

Other Features ¦

MENU

O m

→ Setup → ENTER

E

Menu Language

Set the menu language.

1. Select Menu Language and press the ENTER

E

button.

2. Choose desired language and press the ENTER

E

button.

Choose between

✎

English, Español and Français.

Caption

(On-Screen Text Messages)

Caption (Off / On) ■ : You can switch the

caption function on or off. If captions are

not available, they will not be displayed

on the screen.

The

✎

Caption feature does not

work in Component, HDMI or PC

modes.

Caption Mode ■ : You can select the desired caption

mode.

The availability of captions depends on the

✎

program being broadcasted.

Default / CC1~CC4 / Text1~Text4: (analog channels

only) The Analog Caption function operates in either

analog TV channel mode or when a signal is supplied

from an external device to the TV. (Depending on the

broadcasting signal, the Analog Caption function may or

may not work with digital channels.)

Default / Service1~Service6 / CC1~CC4 /

Text1~Text4: (digital channels only) The Digital Captions

function works with digital channels.

Service1~6

✎

may not be available in digital caption

mode depending on the broadcast.

MEDIA.P

P

POWER

P.MODE

S.MODE

SLEEP

BN68-02663B_Eng.indb 19 2010-03-04 �� 2:56:50

20

English

Basic Features

Digital Caption Options ■ : (digital channels only)

Size: Options include Default, Small, Standard and

Large. The default is Standard.

Font Style: Options include Default and Styles 0 to 7.

The default is Style 0.

Foreground Color: Options include Default, White,

Black, Red, Green, Blue, Yellow, Magenta and Cyan. You

can change the color of the letter. The default is White.

Background Color: Options include Default, White,

Black, Red, Green, Blue, Yellow, Magenta and Cyan.

You can change the background color of the caption.

The default is Black.

Foreground Opacity: This adjusts the opacity of text.

Options include Default, Transparent, Translucent, Solid

and Flashing.

Background Opacity: This adjusts the opacity of

the caption background. Options include Default,

Transparent, Translucent, Solid and Flashing.

Return to Default: This option sets each Size, Font

Style, Foreground Color, Background Color, Foreground

Opacity and Background Opacity to its default.

NOTE

✎

Digital Caption Options

x

are available only

when Default and Service1 ~ Service6 can be

selected in Caption Mode.

The availability of captions depends on the

x

program being broadcasted.

The

x

Default setting follow the standards set by

the broadcaster.

The Foreground and Background cannot be set

x

to have the same color.

You cannot set both the

x

Foreground Opacity

and the Background Opacity to Transparent.

General

Game Mode (Off / On) ■ : When connecting to a game

console such as PlayStation™ or Xbox™, you can enjoy

a more realistic gaming experience by selecting the

game menu.

NOTE

✎

Precautions and limitations for game mode

x

To disconnect the game console and connect –

another external device, set Game Mode to Off in

the setup menu.

If you display the TV menu in – Game Mode, the

screen shakes slightly.

Game Mode

x

is not available when the input source

is set to TV or PC.

After connecting the game console, set

x

Game Mode

to On. Unfortunately, you may notice reduced picture

quality.

If

x

Game Mode is On:

Picture – mode is set to Standard and Sound mode

is set to Movie.

Equalizer – is not available.

Menu Transparency (Birght / Dark) ■ : Set the

Transparency of the menu.

Melody (Off / Low / Medium / High) ■ : Set so that a

melody plays when the TV is turned on or off.

NOTE

✎

Only available when the Input source is set to TV.

x

To turn the melody off, set Melody to Off.

The Melody does not play.

x

When no sound is output from the TV because the –

MUTE button has been pressed.

When no sound is output from the TV because the –

volume has been reduced to minimum with the

VOL – button.

When the TV is turned off by – Sleep Timer function.

Picture In Picture (PIP) ¦

PIP

t

MENU

O m

→ Setup → PIP → ENTER

E

You can watch the TV tuner and one external video source

simultaneously. PIP (Picture-in-Picture) does not function in

the same mode.

NOTE

✎

For PIP sound, refer to the Sound Select instructions.

x

If you turn the TV off while watching in PIP mode, the

x

PIP window will disappear.

You may notice that the picture in the PIP window

x

becomes slightly unnatural when you use the main

screen to view a game or karaoke.

While

x

V-Chip operation, the PIP function cannot be

used.

PIP Settings

x

Main picture Sub picture

Component1,

Component2, HDMI1/DVI,

HDMI2, HDMI3, PC

TV

PIP (Off / On) ■ : Activate or deactivate the PIP function.

Air/Cable (Air / Cable) ■ : Select either Air or Cable as the

input source for the sub-screen.

Channel ■ : Select the channel for the sub-screen.

Size ( ■

Õ

/

Ã

): Select a size for the sub-picture.

Position ( ■

Ã

/

–

/

—

/

œ

): Select a position for the

sub-picture.

Sound Select (Main / Sub) ■ : You can choose the

desired sound (Main / Sub) in PIP mode.

Available when

✎

PIP is set to On.

BN68-02663B_Eng.indb 20 2010-03-04 �� 2:56:51

La page est en cours de chargement...

Samsung LN32C450 Le manuel du propriétaire

Samsung LN32C450 Le manuel du propriétaire

dans d''autres langues

Documents connexes