Samsung LN32C350 Le manuel du propriétaire

Catégorie
Téléviseurs LCD
Taper
Le manuel du propriétaire

Ce manuel convient également à

LCD TV
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at
www.samsung.com/register
Model Serial No.
Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.
Comuníquese con SAMSUNG WORLDWIDE
Si desea formular alguna pregunta o comentario en relación con los productos de Samsung, comuníquese con el centro de
atención al cliente de SAMSUNG.
Country Customer Care Center
Web Site Address
CANADA 1-800-SAMSUNG(726-7864) www.samsung.com
Samsung Electronics Canada Inc., Customer
Service 55 Standish Court Mississauga,
Ontario L5R 4B2 Canada
Samsung Electronique Canada Inc.,
Service à la Clientèle 55 Standish Court
Mississauga, Ontario L5R 4B2 Canada
U.S.A 1-800-SAMSUNG(726-7864) www.samsung.com
Samsung Electronics America, Inc.
105 Challenger Road
Ridgefield Park, NJ 07660-0511
BN68-02620B-04
BN68-02620B_NA_cover_New.indd 1 2010-03-24 �� 3:18:33
2
English
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance.
Product design and specifications may be changed without notice.
Important Warranty Information Regarding Television Format Viewing
See the warranty card for more information on warranty terms.
Wide screen format LCD Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-
motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to fill the screen if your model
offers this feature and the images are constantly moving. Displaying stationary graphics and images on screen, such as the dark sidebars on
nonexpanded standard format television video and programming, should be limited to no more than 5% of the total television viewing per week.
Additionally, viewing other stationary images and text such as stock market reports, video game displays, station logos, web sites or computer
graphics and patterns, should be limited as described above for all televisions. Displaying stationary images that exceed the above guidelines
can cause uneven aging of LCD Displays that leave subtle, but permanent burned-in ghost images in the LCD picture. To avoid this, vary the
programming and images, and primarily display full screen moving images, not stationary patterns or dark bars. On LCD models that offer picture
sizing features, use these controls to view different formats as a full screen picture.
Be careful in the selection and duration of television formats used for viewing. Uneven LCD aging as a result of format selection and use, as well as
burned-in images, are not covered by your Samsung limited warranty.
SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED WARRANTY STATEMENT•
Subject to the requirements, conditions, exclusions and limitations of the original Limited Warranty supplied with Samsung Electronics
(SAMSUNG) products, and the requirements, conditions, exclusions and limitations contained herein, SAMSUNG will additionally provide
Warranty Repair Service in the United States on SAMSUNG products purchased in Canada, and in Canada on SAMSUNG products
purchased in the United States, for the warranty period originally specified, and to the Original Purchaser only.
The above described warranty repairs must be performed by a SAMSUNG Authorized Service Center. Along with this Statement, the Original
Limited Warranty Statement and a dated Bill of Sale as Proof of Purchase must be presented to the Service Center. Transportation to and
from the Service Center is the responsibility of the purchaser. Conditions covered are limited only to manufacturing defects in material or
workmanship, and only those encountered in normal use of the product.
Excluded, but not limited to, are any originally specified provisions for, in-home or on-site services, minimum or maximum repair times,
exchanges or replacements, accessories, options, upgrades, or consumables.
For the location of a SAMSUNG Authorized Service Center, please call toll-free:
In the United States : 1-800-SAMSUNG (1-800-726-7864)
In Canada : 1-800-SAMSUNG
Still image warning
Avoid displaying still images (such as jpeg picture files) or still image elements (such as TV channel logos, panorama or 4:3 image format, stock
or news bars at screen bottom etc.) on the screen. Constant displaying of still pictures can cause ghosting of LCD screen, which will affect image
quality. To reduce risk of this effect, please follow below recommendations:
Avoid displaying the same TV channel for long periods.•
Always try to display any image on full screen, use TV set picture format menu for best possible match.•
Reduce brightness and contrast values to minimum required to achieve desired picture quality, exceeded values may speed up the burnout •
process.
Frequently use all TV features designed to reduce image retention and screen burnout, refer to proper user manual section for details.•
Securing the Installation Space
Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation.
Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product.
When using a stand or wall-mount, use parts provided by Samsung Electronics only.
If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product falling.
x
The appearance may differ depending on the product.
Installation with a stand. Installation with a wall-mount.
4inches
4inches
4inches
4inches
4inches
4inches
4inches
© 2010 Samsung Electronics Co., Ltd. All rights reserved.
BN68-02620B_Eng.indb 2 2010-03-24 �� 11:34:24
3
Contents
English
Getting Started
List of Features y ......................................................... 4
Accessories y .............................................................. 4
Installing the LCD TV Stand y ...................................... 4
Viewing the Control Panel y ......................................... 5
Viewing the Remote Control y ...................................... 6
Connecting to an Antenna y ........................................ 7
Plug & Play (Initial Setup) y ........................................... 7
Connections
Connecting to an AV Device y ...................................... 8
Connecting to an Audio Device y ................................. 9
Connecting to a PC y .................................................. 9
Changing the Input source y ...................................... 10
Basic Features
How to Navigate Menus y .......................................... 11
Channel Menu y ........................................................ 11
Seeing Channels 11
Memorizing channels 12
Channel Setup 12
Editing channels 12
Other Features 12
Picture Menu y .......................................................... 13
Changing the Preset Picture Mode 13
Adjusting picture settings 13
Setting up the TV with your PC 14
Changing the Picture Options 14
Sound Menu y ........................................................... 16
Changing the Preset Sound Mode 16
Adjusting sound settings 16
Sound Settings 16
Setup Menu y ............................................................ 17
Setting the Time 17
Using the Sleep Timer 17
Setting the On/Off Timer 17
Locking Programs 18
Other Features 19
Support Menu y ......................................................... 20
Advanced Features
Media Play y .............................................................. 21
Connecting a USB Device 21
Other Information
Installing the Wall Mount y ......................................... 25
Securing the TV to the Wall (LN32C350 Only) y ......... 26
Securing the TV to the Wall y ..................................... 27
Anti-theft Kensington Lock y ...................................... 27
Troubleshooting y ...................................................... 28
Specifications y ......................................................... 31
License 31
Dimensions y ............................................................. 32
Index y ...................................................................... 33
Check the Symbol!
t
O
This function can be used by pressing the
TOOLS button on the remote control.
Note :
Important information
Step by step guide :
Informs you how to access
the menu.
MEDIA.P
P
POWER
ENGLISH
BN68-02620B_Eng.indb 3 2010-03-24 �� 11:34:24
4
Getting Started
English
List of Features
Excellent Digital Interface & Networking: With a built-in HD digital tuner, nonsubscription HD broadcasts can be viewed y
without a cable box / STB (Set-Top-Box) satellite receiver.
Media Play y : Allows you to play music files, and pictures saved on a USB device. (P. 21)
Self Diagnosis y : You can check picture and sound operation. (P. 20)
Accessories
Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer.
The items' colors and shapes may vary depending on the models.
Remote Control (BN59-01006A) & Batteries (AAA x 2) y
Owner’s Instructions y
Warranty Card / Safety Guide / Quick Setup Guide y
Cleaning Cloth (BN63-01798B) y
TV-Holder& Screw (M6: BN96-10788C) (LN32C350 Only) y
Installing the LCD TV Stand
Components
When installing the stand, use the provided components and parts.
Stand y Screws y
Make sure to distinguish between the front and back of the Stand and Guide Stand when assembling them.
Make sure that at least two persons lift and move the LCD TV.
Lay the product down, with the screen facing up and fasten the screws.
A B
3EA (M4 X L16)
1 EA
2
1
B
A
Front
(M6 X 16)
Rear
BN68-02620B_Eng.indb 4 2010-03-24 �� 11:34:26
5
01 Getting Started
English
Viewing the Control Panel
The product color and shape may vary depending on the model.
P
(Power)
Turns the TV on or off.
Remote control sensor Aim the remote control towards this spot on the TV.
SOURCE
E
Toggles between all the available input sources. In the on-screen menu, use this
button as you would use the ENTER
E
button on the remote control.
MENU
Displays an on-screen menu, the OSD (on screen display), of your TV’s features.
y
Adjusts the volume. In the OSD, use the
y
buttons as you would use the
and buttons on the remote control.
z
Changes the channels. In the OSD, use the
z
buttons as you would use the
and buttons on the remote control.
Power Indicator Blinks and turns off when the power is on and lights up in standby mode.
Standby mode
Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example). A small amount
of electric power is still consumed even when the power button is turned off. It is best to unplug the power cord.
Power IndicatorRemote control sensor
Speakers
BN68-02620B_Eng.indb 5 2010-03-24 �� 11:34:26
6
Getting Started
English
Viewing the Remote Control
MEDIA.P
A BCD
Return to the previous channel.
Display and select the available video
sources. (P. 10)
MTS: Press to choose stereo, mono
or Separate Audio Program
(SAP broadcast). (P. 16)
P.SIZE: Picture size selection. (P. 15)
CC: Controls the caption decoder.
(P. 19)
Cut off the sound temporarily.
Displays Favorite Channel Lists on
the screen. (P. 12)
Press to display information on the TV
screen. (P. 17)
Exit the menu.
Change channels.
Displays the main on-screen menu.
Press to select additional channels
(digital) being broadcast by the same
station. For example, to select channel
‘54-3’, press ‘54’, then press ‘-’ and ‘3’.
Press to directly access to channels.
Turns the TV on and off.
Displays the channel list on the screen.
(P. 11)
Quickly select frequently used functions.
Select on-screen menu items and
change menu values.
Return to the previous menu.
View the Media Play. (P. 21)
Buttons used in the Channel list, Media
Play menu, etc.
Adjusts the volume.
Installing batteries (Battery size: AAA)
NOTE
Use the remote control within 23 feet from the TV.
x
Bright light may affect the performance of the remote
x
control. Avoid use when nearby fluorescent lights or neon
signs.
The color and shape may vary depending on the model.
x
BN68-02620B_Eng.indb 6 2010-03-24 �� 11:34:26
7
01 Getting Started
English
Connecting to an Antenna
When the TV is initially powered on, basic settings proceed automatically.
Connecting the power cord and antenna.
Plug & Play (Initial Setup)
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWER
P
button. Plug & Play is available only when the Input source is set to TV.
To return to the previous step, press the red button.
1
Selecting a language
Press the or button, then press the ENTER
E
button.
Select the desired OSD (On Screen Display) language.
P
POWER
FAV . CH
CHLIST
MEDIA.P
P . MODE
S.MODE
P . SIZE
CC
MTS
INFO
SLEEP
2
Selecting Store Demo
or Home Use
Press the or button, then press the ENTER
E
button.
Select the y Home Use mode. Store Demo Mode is for retail
environments.
To return the unit’s settings from y Store Demo to Home Use
(standard): Press the volume button on the TV. When you see the
volume in the OSD, press and hold MENU for 5 sec.
3
Selecting an antenna
Press the or button, then press the ENTER
E
button. Select Air, Cable or Auto.
In Cable mode, you can select the correct signal source among
STD, HRC, and IRC
by pressing the , , or button, then press the ENTER
E
button.
4
Selecting a channel The channel search will start automatically.
For more information, refer to Channel Auto Program. (P. 12)
Press the
ENTER
E
button at any time to interrupt the memorization process.
5
Setting the Clock
Mode
Set the Clock Mode automatically or manually.
If you select the
Auto, set the daylight saving time.
Select the time zone where you live.
6
Viewing the HD
Connection Guide.
The connection method for the best HD screen quality is displayed.
7
Enjoy your TV.
Press the ENTER
E
button.
If You Want to Reset This Feature...
MENU
O m
Setup Plug & Play ENTER
E
AB
CABLE
BOX
RF (A/B) Switch
Splitter
OUTIN
ANT IN
Cable
R-AUDIO-L
P
R PB Y
ANT OUT
VHF/UHF Antenna
Power Input
or
Plug & Play
Language : English
Time
Game Mode : Off
V-Chip
Caption
Melody : Medium
Setup
BN68-02620B_Eng.indb 7 2010-03-24 �� 11:34:28
8
English
Connections
Connecting to an AV Device
Using an HDMI / DVI Cable: HD connection (up to 1080p)
We recommend using the HDMI connection for the best quality HD picture.
Available devices: DVD, Blu-ray player, HD cable box, HD satellite receiver (STB).
HDMI IN 1(DVI), 2
/ PC/DVI AUDIO IN
When using an HDMI/DVI cable connection, you must use the
x
HDMI IN 1(DVI) jack for video. A DVD, Blu-ray player,
HD cable box, HD STB satellite receiver, cable box, or STB satellite receiver may require a DVI-HDMI (DVI to HDMI)
cable or DVI-HDMI (DVI to HDMI) adapter. The PC/DVI AUDIO IN jack is required for audio.
If an external device such as a DVD / Blu-ray player / cable box / satellite receiver (Set-Top Box) supporting an HDMI
x
versions older than 1.3 is connected, the TV may operate abnormally (e.g. no screen display / no sound / annoying
flicker / abnormal Color).
If there is no sound after connecting an HDMI cable, check the HDMI version of the external device. If the version is
x
older than 1.3, contact the provider of the corresponding device to confirm the HDMI version and request an upgrade.
It is recommended you purchase an HDMI-certifi ed cable. Otherwise, the screen may appear blank or a connection
x
error may occur.
Using a Component Cable: (up to 1080p), Using an Audio/Video Cable: (480i only)
Available devices: DVD, Blu-ray player, cable box, STB satellite receiver, VCR
Connections
W W
B
G
RR
W
Y
Yellow Red White Red Blue Green
Red White
W
R
BD/DVD player/
HD cable/sat box
R-AUDIO-L
P
R PB Y
HDMI OUT
Device
R-AUDIO-L
P
R PB Y
DVI OUT
R-AUDIO-L
P
R PB Y
AUDIO OUT
R-AUDIO-L
P
R PB Y
COMPONENT OUT
R-AUDIO-L
P
R PB Y
AUDIO OUT
Blu-ray player
R-AUDIO-L
P
R PB Y
VIDEO OUT
R-AUDIO-L
P
R PB Y
AUDIO OUT
When connecting to
AV IN, the color
of the AV IN [Y/VIDEO] jack (Green)
does not match the color of the
video cable (Yellow).
For better picture quality, the
Component connection is
recommended over the A/V
connection.
VCR
WY
W Y
B
G
R
W
W
B
G
R
R
R
R
R
BN68-02620B_Eng.indb 8 2010-03-24 �� 11:34:30
9
English
02 Connections
Connecting to an Audio Device
Using an Optical (Digital) or Audio (Analog) Cable Connection
Available devices: Digital Audio System, Amplifier, Home Theater
DIGITAL AUDIO OUT (OPTICAL)
When a Digital Audio System is connected to the
x
DIGITAL AUDIO OUT (OPTICAL) jack, decrease the volume
of both the TV and the system.
5.1 CH (channel) audio is available when the TV is connected to an external device supporting 5.1 CH.
x
When the receiver (home theater) is set to on, you can hear sound output from the TV’s optical jack. When the
x
TV is receiving a DTV signal, the TV will send 5.1 CH sound to the home theater receiver. When the source is
a digital component such as a DVD / Blu-ray player / cable box / STB (Set-Top-Box) satellite receiver and is
connected to the TV via HDMI, only 2 CH audio will be heard from the home theater receiver. If you want to
hear 5.1 CH audio, connect the digital audio out jack from your DVD / Blu-ray player / cable box / STB satellite
receiver directly to an amplifier or home theater.
AUDIO OUT
: Connects to the audio input jacks on your amplifier/home theater.
When connecting, use the appropriate connector (sold separately).
x
When an audio amplifier is connected to the
x
AUDIO OUT jacks: Decrease the volume of the TV and adjust the
volume level with the amplifier’s volume control.
Connecting to a PC
Using an HDMI/DVI Cable / a D-sub Cable
R-AUDIO-L
P
R PB Y
AUDIO OUT
R-AUDIO-L
P
R PB Y
AUDIO OUT
W
R
DVD
Home Theater
R-AUDIO-L
P
R PB Y
OPTICAL
R-AUDIO-L
P
R PB Y
AUDIO IN
Red White
W W
B
G
RR
W
Y
Digital audio system
R-AUDIO-L
P
R PB Y
DVI OUT
R-AUDIO-L
P
R PB Y
PC OUT
BN68-02620B_Eng.indb 9 2010-03-24 �� 11:34:32
10
English
Basic Features
Changing the Input source
Source List
MENU
O m
Input Source List ENTER
E
Use to select TV or an external input sources
such as a DVD / Blu-ray player / cable box /
STB satellite receiver.
TV / AV / Component / PC /
HDMI1/DVI / HDMI2
You can only choose external
devices that are connected to the
TV. In the Source List, connected
inputs will be highlighted.
PC
always stay activated.
Edit Name
MENU
O m
Input Edit Name ENTER
E
VCR / DVD / Cable STB / Satellite STB / PVR STB
/ AV Receiver / Game / Camcorder / PC / DVI PC /
DVI / TV / IPTV / Blu-ray / HD DVD / DMA: Name the
device connected to the input jacks to make your input
source selection easier.
When connecting an HDMI/DVI cable to the
HDMI IN
1(DVI) port, you should set to DVI PC or DVI mode
under Edit Name.
Display Modes (D-Sub and HDMI/DVI Input)
Optimal resolution is 1360x768@60Hz.
Mode Resolution
Horizontal Frequency
(KHz)
Vertical Frequency
(Hz)
Pixel Clock Frequency
(MHz)
Sync Polarity
(H / V)
IBM
640 x 350 31.469 70.086 25.175 + / -
720 x 400 31.469 70.087 28.322 - / +
MAC
640 x 480 35.000 66.667 30.240 - / -
832 x 624 49.726 74.551 57.284 - / -
VESA DMT
640 x 480
31.469 59.940 25.175 - / -
37.861 72.809 31.500 - / -
37.500 75.000 31.500 - / -
800 x 600
37.879 60.317 40.000 + / +
48.077 72.188 50.000 + / +
46.875 75.000 49.500 + / +
1024 x 768
48.363 60.004 65.000 - / -
56.476 70.069 75.000 - / -
60.023 75.029 78.750 + / +
1280 x 720
45.000 60.000 74.250 + / +
1360 x 768 47.712 60.015 85.500 + / +
VESA CVT
720 x 576 35.910 59.950 32.750 - / +
1280 x 720 56.456 74.777 95.750 - / +
VESA GTF 1280 x 720 52.500 70.000 89.040 - / +
NOTE
For HDMI/DVI cable connection, you must use the
x
HDMI IN 1(DVI) jack.
The interlace mode is not supported.
x
The set might operate abnormally if a non-standard video format is selected.
x
Separate and Composite modes are supported. SOG(Sync On Green) is not supported.
x
Input Cables (Sold Separately)
HDMI HDMI-DVI Component Composite (AV) Coaxial (RF) VGA
MEDIA.P
P
POWER
BN68-02620B_Eng.indb 10 2010-03-24 �� 11:34:33
11
English
03 Basic Features
How to Navigate Menus
Before using the TV, follow the steps below to learn how to
navigate the menu and select and adjust different functions.
1 MENU button: Displays the main on-screen menu.
2 ENTER
E
/ Direction button: Move the cursor and
select an item. Confirm the setting.
3 RETURN button: Returns to the previous menu.
4 EXIT button: Exits the on-screen menu.
How to Operate the OSD (On Screen Display)
The access step may differ depending on the selected menu.
1
MENU
m
The main menu options appear on
the screen:
Picture, Sound, Channel, Setup,
Input, Application, Support.
2
▲ / ▼ Select an icon with the or
button.
3
ENTER
E
Press ENTER
E
to access the
sub-menu.
4
▲ / ▼
Select the desired submenu with
the or button.
5
◄ / ►
Adjust the value of an item with the
or button. The adjustment in
the OSD may differ depending on
the selected menu.
6
ENTER
E
Press ENTER
E
to confirm the
selection.
7
EXIT
e
Press EXIT.
Channel Menu
Seeing Channels ¦
Channel List
MENU
O m
Channel Channel List ENTER
E
Add, delete or set Favorite channels and use
the program guide for digital broadcasts.
Select a channel in the All Channels, Added
Channels, Favorite or Programmed screen
by pressing the / buttons, and pressing
the ENTER
E
button. Then you can watch
the selected channel.
All Channels: Shows all currently available
channels.
Added Channels: Shows all added channels.
*
Favorite: Shows all favorite channels.
Programmed: Shows all currently reserved
programs.
Using the color buttons with the
Channel List
ABCD
x
Green (Zoom): Enlarges or shrinks a channel
number.
ABCD
x
Yellow (Select): Selects multiple channel lists.
You can perform the add/delete or add to Favorite/
delete from Favorite function for multiple channels at
the same time. Select desired channels and press
the Yellow button to set all the selected channels at
the same time. The
c
mark appears to the left of
the selected channels.
T
x
(Tools): Displays the Channel List option menu.
(The Options menus may differ depending on the
situation.)
Channel Status Display Icons
Icons Operations
c
A channel selected.
*
A channel set as a Favorite.
)
A reserved Program.
(
A program currently being broadcast.
Basic Features
MEDIA.P
P
POWER
MEDIA
.
P
A
B
C
D
1
2
3
4
Added Channels
6 Air
6-1 ♥ TV #6
7-1 ♥ TV #7
8 Air
9 Air
9-1 ♥ TV #9
10 Air
10-1 ♥ TV #10
11-1 ♥ TV #11
Air
B
Zoom
C
Select T Tools ► Next Program
BN68-02620B_Eng.indb 11 2010-03-24 �� 11:34:34
12
English
Basic Features
Using Favorite Channels ¦
MENU
O m
Channel Channel List ENTER
E
*
Add to Favorite / Delete from Favorite
t
Set channels you watch frequently as
Favorites.
1. Select a channel and press the TOOLS
button.
2. Add or delete a channel using the Add to
Favorite or Delete from Favorite menu
respectively.
Memorizing channels ¦
MENU
O m
Channel ENTER
E
Antenna (Air / Cable)
t
Before your television can begin memorizing the available
channels, you must specify the type of signal source that is
connected to the TV (i.e. an Air or a Cable system).
Auto Program
Air : Air antenna signal.
Cable : Cable antenna signal.
Auto : Air and Cable antenna.
NOTE
When selecting the Cable TV system: Selects the
x
cable system. STD, HRC and IRC identify various
types of cable TV systems. Contact your local cable
company to identify the type of cable system that
exists in your particular area. At this point, the signal
source has been selected.
After all the available channels are stored, it starts
x
to remove scrambled channels. The Auto program
menu then reappears.
How to Stop Auto Programming
1. Press the ENTER
E
button.
2. A message will ask Stop Auto Program? Select Yes by
pressing the or button.
3. Press the ENTER
E
button.
Editing channels ¦
MENU
O m
Channel Channel List ENTER
E
Channel Name Edit
t
1. Select a channel and press the TOOLS button.
2. Edit the channel name using the Channel Name Edit
menu.
Channel Name Edit (analog channels only): Assign your
own channel name.
Other Features ¦
MENU
O m
Channel ENTER
E
Clear Scrambled Channel
This function is used to filter out scrambled channels after
Auto Program is completed. This process may take up to
20~30 minutes.
How to Stop Searching Scrambled Channels
1. Press the ENTER
E
button to select Stop.
2. Press the button to select Yes.
3. Press the ENTER
E
button.
This function is only available in
Cable mode.
Channel List
MENU
O m
Channel Channel List ENTER
E
Channel List Option Menu
t
Set each channel using the Channel List menu options (Add/
Delete, Timer Viewing, Select All/ Deselect All). Option
menu items may differ depending on the channel status.
1. Select a channel and press the TOOLS button.
2. Select a function and change its settings.
Add / Delete : Delete or add a channel to display the
channels you want.
NOTE
All deleted channels will be shown on the
x
All
Channels menu.
A gray-colored channel indicates the channel
x
has been deleted.
The
x
Add menu only appears for deleted
channels.
Delete a channel from the
x
Added Channels or
Favorite menu in the same manner.
MEDIA.P
P
POWER
Added Channels
6 Air
6-1 ♥ TV #6
7-1 ♥ TV #7
8 Air
9 Air
9-1 ♥ TV #9
10 Air
10-1 ♥ TV #10
11-1 ♥ TV #11
Air
B
Zoom
C
Select T Tools ► Next Program
Delete
Add to Favorite
Timer Viewing
Select All
Auto Program
BN68-02620B_Eng.indb 12 2010-03-24 �� 11:34:35
13
English
03 Basic Features
Timer Viewing : You can set a desired channel to be
displayed automatically at the set time; even when you
are watching another channel. Set the current time first
to use this function.(P. 17)
1. Press the / / / buttons to select the
desired channel in Channel List.
2. Press the TOOLS button, then select Timer Viewing.
3. Scroll up or down to adjust the settings in the box,
or use the numeric buttons on your remote for
entering the date and time.
If you selected
Once, Every Week or Every Day
in Repeat, you can enter the date you want.
4.
Select OK, then press the ENTERE button when done.
NOTE
Only memorized channels can be reserved.
x
Reserved programs will be displayed in the
x
Programmed menu.
When a digital channel is selected, press the
x
button to view the digital program.
Select All : Select all the channels in the channel list.
Deselect All : Deselect all the selected channels.
You can only select
Deselect All when one or
more channels are selected.
Programmed
(in Channel List)
You can view, modify or delete a show you have reserved to
watch.
1. Press the
ENTERE
button to select Channel List.
2. Press the and button move to the Programmed
menu.
Change Info : Change a show you have reserved to watch.
Cancel Schedules : Cancel a show you have reserved
to watch.
Information : Display a show you have reserved
to watch. (You can also change the reservation
Information.)
Select All / Deselect All : You can select or deselect all
channels in the channel list.
Fine Tune
(analog channels only)
If the reception is clear, you do not have to fine tune the
channel, as this is done automatically during the search and
store operation. If the signal is weak or distorted, fine tune
the channel manually.
Select y Fine Tune in the Channel menu.
Fine tuned channels that have been saved are marked
with an asterisk “*” on the right-hand side of the
channel number in the channel banner.
To reset the fine-tuning, select
Reset.
Picture Menu
Changing the Preset Picture Mode ¦
MENU
O m
Picture Mode ENTER
E
Mode
t
Select your preferred picture type.
Dynamic : Suitable for a bright room.
Standard : Suitable for a normal environment.
Movie : Suitable for watching movies in a dark room.
Adjusting picture settings ¦
MENU
O m
Picture Backlight ENTER
E
Backlight / Contrast / Brightness /
Sharpness / Color / Tint (G/R)
Your television has several setting options for picture quality
control.
NOTE
When you make changes to
x
Backlight, Contrast,
Brightness, Sharpness, Color or Tint (G/R) the
OSD will be adjusted accordingly.
In PC mode, you can only make changes to
x
Backlight, Contrast and Brightness.
Settings can be adjusted and stored for each
x
external device connected to the TV.
Lowering picture brightness reduces power
x
consumption.
BN68-02620B_Eng.indb 13 2010-03-24 �� 11:34:35
14
English
Basic Features
Setting up the TV with your PC ¦
Set the input source to PC.
Auto Adjustment
t
MENU
O m
Picture Auto Adjustment
ENTER
E
Adjust frequency values/positions and fine tune the settings
automatically.
Not available when connecting through HDMI/DVI
cable.
Screen
Coarse / Fine : Removes or reduces picture noise. If the
noise is not removed by Fine-tuning alone, then adjust
the frequency as best as possible (Coarse) and Fine-
tune again. After the noise has been reduced, readjust
the picture so that it is aligned to the center of screen.
Position : Adjust the PC’s screen positioning if it does
not fit the TV screen. Press the or button to adjust
the Vertical-Position. Press the or button to adjust
the Horizontal-Position.
Image Reset : Resets the image to default settings.
Using Your TV as a Computer (PC) Display
Setting Up Your PC Software (Based on Windows XP)
Depending on the version of Windows and the video card,
the actual screens on your PC will probably look different, but
the same basic set-up information will apply in most cases.
(If not, contact your computer manufacturer or Samsung
Dealer.)
1. Click on “Control Panel” on the Windows start menu.
2. Click on “Appearance and Themes” in the “Control
Panel” window and a display dialog-box will appear.
3. Click on “Display” and a display dialog box will appear.
4. Navigate to the “Settings” tab on the display dialog-box.
The correct size setting (resolution) y
[Optimum: 1360X768 pixels]
If a vertical-frequency option exists on your display y
settings dialog box, the correct value is ‘60’ or ‘60 Hz’.
Otherwise, just click ‘OK’ and exit the dialog box.
Changing the Picture Options ¦
Advanced Settings
MENU
O m
Picture Advanced Settings
ENTER
E
(available in Standard / Movie mode)
Compared to previous models, new Samsung TVs have a
more precise picture.
In PC mode, you can only make changes to
Gamma
and White Balance.
Black Tone (Off / Dark / Darker / Darkest) : Select the
black level to adjust the screen depth.
Dynamic Contrast (Off / Low / Medium / High) :
Adjust the screen contrast.
Gamma : Adjust the primary color intensity.
Color Space (Auto / Native) : Adjust the range of colors
available to create the image.
White Balance : Adjust the color temperature for a more
natural picture.
R-Offset / G-Offset / B-Offset: Adjust each color's
(red, green, blue) darkness.
R-Gain / G-Gain / B-Gain : Adjust each color's (red,
green, blue) brightness.
Reset: Resets the White Balance to it's default
settings.
Flesh Tone : Emphasize pink "flesh tone".
Edge Enhancement (Off / On) : Emphasize object
boundaries.
Advanced Settings
Black Tone : Off
Dynamic Contrast : Medium
Gamma : 0
Color Space : Native
White Balance
Flesh Tone : 0
Edge Enhancement : On
U Move E Enter R Return
BN68-02620B_Eng.indb 14 2010-03-24 �� 11:34:35
15
English
03 Basic Features
Picture Options
MENU
O m
Picture Picture Options
ENTER
E
In PC mode, you can only make changes to the
Color
Tone and Size.
Color Tone (Cool / Normal / Warm1 / Warm2)
Warm1
or Warm2 will be deactivated when the picture
mode is Dynamic.
Settings can be adjusted and stored for each external
device connected to an input on the TV.
Size : Your cable box/satellite receiver
may have its own set of screen sizes as
well. However, we highly recommend
you use 16:9 mode most of the time.
16:9: Sets the picture to 16:9 wide
mode.
Zoom1: Use for moderate magnification.
Zoom2: Use for a stronger magnification.
Wide Fit: Enlarges the aspect ratio of the picture to fit
the entire screen.
4:3: Sets the picture to basic (4:3) mode.
Do not watch in 4:3 format for a long time. Traces
of borders displayed on the left, right and center
of the screen may cause image retention (screen
burn) which are not covered by the warranty.
Screen Fit: Displays the full image without any cut-off
when HDMI (720p / 1080i / 1080p) or Component
(1080i / 1080p) signals are input.
NOTE
After selecting
x
Zoom1, Zoom2 or Wide Fit:
1. Press the button to select Position.
2. Press the ENTER
E
button.
3. Press the or button to move the picture up
or down.
4. Press the ENTER
E
button.
5. Press the button to select Reset.
6. Press the ENTER
E
button to reset the picture
to its default position.
After selecting
x
Screen Fit in HDMI (1080i/1080p) or
Component (1080i/1080p) mode, you may need to
center the picture:
1. Press the or button to select Position.
2. Press the ENTER
E
button.
3. Press the ▲, ▼, ◄ or button to move the
picture.
3. Press the ENTER
E
button.
4. Press the or button to select Reset.
5. Press the ENTER
E
button.
HD (High Definition): 16:9 - 1080i/1080p (1920x1080),
x
720p (1280x720)
Settings can be adjusted and stored for each
x
external device you have connected to an input on
the TV.
Input Source Picture Size
ATV, AV,
Component (480i, 480p)
16:9, Zoom1,
Zoom2, 4:3
DTV(1080i),
Component (1080i, 1080p),
HDMI (720p, 1080i, 1080p)
16:9, 4:3, Wide Fit,
Screen Fit
PC
16:9, 4:3
Digital Noise Filter (Off / Low / Medium / High /
Auto): If the broadcast signal received by your TV is
weak, you can activate the Digital Noise Filter feature
to reduce any static and ghosting that may appear on
the screen.
When the signal is weak, try other options until the
best picture is displayed.
HDMI Black Level (Normal / Low) : Selects the black
level on the screen to adjust the screen depth.
Available only in HDMI mode (RGB signals).
Film Mode (Off / Auto) : Sets the TV to automatically
sense and process film signals from all sources and
adjusts the picture for optimum quality.
Available in TV, AV, COMPONENT (480i / 1080i)
and HDMI (480i / 1080i).
Picture Reset
(Reset Picture Mode / Cancel)
Reset all picture settings to the default values.
Reset Picture Mode : Returns all picture values in the
currently selected mode to the default settings.
Picture Options
Color Tone : Normal
Size : 16:9
Digital Noise Filter : Auto
HDMI Black Level : Normal
Film Mode : Off
U Move E Enter R Return
MEDIA.P
P
POWER
BN68-02620B_Eng.indb 15 2010-03-24 �� 11:34:35
16
English
Basic Features
Sound Menu
Changing the Preset Sound Mode ¦
MENU
O m
Sound Mode ENTER
E
Mode
t
Standard : Selects the normal sound mode.
Music : Emphasizes music over voices.
Movie : Provides the best sound for movies.
Clear Voice : Emphasizes voices over other sounds.
Custom : Recalls your customized sound settings.
Adjusting sound settings ¦
MENU
O m
Sound Equalizer ENTER
E
Equalizer
Adjusts the sound mode.
Mode : Selects the sound mode among the predefined
settings.
Balance L/R : Adjusts the balance between the right and
left speaker.
100Hz / 300Hz / 1KHz / 3KHz / 10KHz (Bandwidth
Adjustment): Adjusts the level of specific bandwidth
frequencies.
Reset : Resets the equalizer to its default settings.
Sound Settings ¦
SRS TruSurround HD (Off / On)
SRS TruSurround HD is a patented SRS technology that
solves the problem of playing 5.1 multichannel content
over two speakers. TruSurround delivers a compelling,
virtual surround sound experience through any two-speaker
playback system, including internal television speakers. It is
fully compatible with all multichannel formats.
Preferred Language
(digital channels only)
Digital-TV broadcasts are capable of
simultaneous transmission of many
audio tracks (for example, simultaneous
translations of the program into foreign
languages).
You can only select a language among the ones being
broadcasted.
Multi-Track Sound (MTS)
(analog channels only)
Mono : Choose for channels that are
broadcasting in mono or if you are
having difficulty receiving a stereo signal.
Stereo : Choose for channels that are
broadcasting in stereo.
SAP : Choose to listen to the Separate Audio Program,
which is usually a foreign-language translation.
Depending on the particular program being broadcast,
you can listen to Mono, Stereo or SAP.
Auto Volume (On/Off)
Because each broadcasting station has its own signal
conditions, the volume may fluctuate each time channel
is changed. This feature lets you automatically adjust the
volume of the desired channel by lowering the sound output
when the modulation signal is high or by raising the sound
output when the modulation signal is low.
Speaker Select
(External Speaker / TV Speaker)
A sound echo may occur due to a difference in decoding
speed between the main speaker and the audio receiver. In
this case, set the TV to External Speaker.
When
Speaker Select is set to External Speaker, the
volume and MUTE buttons will not operate and the
sound settings will be limited.
When
Speaker Select is set to External Speaker, you
should use these settings.
TV speaker: Off, External speaker: On
x
When
Speaker Select is set to TV Speaker, you
should use these settings.
TV speaker: On, External speaker: On
x
If there is no video signal, both speakers will be mute.
Sound Reset
(Reset All / Reset Sound Mode / Cancel)
Reset All : Resets all sound settings to the factory
defaults.
Reset Sound Mode : Returns all sound values in the
currently selected mode to the default settings.
MEDIA.P
P
POWER
MEDIA.P
P
POWER
BN68-02620B_Eng.indb 16 2010-03-24 �� 11:34:36
17
English
03 Basic Features
Setup Menu
Setting the Time ¦
MENU
O m
Setup Time ENTER
E
Time
The current time will appear every time you press the
INFO button.
Clock : Setting the clock is for using various timer
features of the TV.
If you disconnect the power cord, you have to set
the clock again.
Clock Mode: Set up the current time manually or
automatically.
Auto : Set the current time automatically using the
time from a digital channel.
The antenna must be connected in order to set
the time automatically.
Manual : Set the current time manually.
Depending on the broadcast station and signal,
the auto time set up may not be correct. In this
case, set the time manually.
Clock Set: Set the Month, Day, Year, Hour, Minute
and am/pm.
Available only when
Clock Mode is set to
Manual.
You can set the month, day, year, hour and minute
directly by pressing the number buttons on the
remote control.
DST (Off / On / Auto): Switches the DST(Daylight
Saving Time) function on or off.
This function is only available when the
Clock
Mode is set to Auto.
Time Zone: Select your time zone.
This function is only available when the
Clock
Mode is set to Auto.
Using the Sleep Timer ¦
MENU
O m
Setup Time Sleep Timer
ENTER
E
Sleep Timer
t
: Automatically shuts off the TV
after a preset period of time. (30, 60, 90, 120, 150 and
180 minutes).
To cancel the
Sleep Timer, select Off.
Setting the On/Off Timer ¦
MENU
O m
Setup Time Timer 1
ENTER
E
Timer 1 / Timer 2 / Timer 3 : Three different on / off
timer settings can be made. You must set the clock first.
On Time / Off Time: Set the hour, minute, am/pm
and activate / inactivate. (To activate the timer with the
setting you have chosen, set to Activate.)
Volume: Set the desired volume level.
Contents: When the On Time is activated, you can turn
on a specific channel or play back contents such as
photo or audio files.
TV/USB : Select TV or USB. (Make sure that an USB
device is connected to your TV.)
Antenna : Select Air or Cable.
Channel : Select the desired channel.
Music : Select the folder containing MP3 files on the
USB device.
Photo : Select the folder containing JPEG files on the
USB device.
Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat,
Sat~Sun or Manual to set at you convenience. If you
select Manual, you can set up the day you want to
activate the timer.
The
c
mark indicates the day is selected.
Auto Power Off (available only when the TV is turned
on by the Timer): The TV will be automatically turned off
after 3 hours of being left idle to prevent overheating.
Timer 1
L Move U Adjust E Enter R Return
On Time
Off Time
Volume Contents
Repeat
Sun Mon Tue Wed Thu Fri Sat
12 00 am Inactivate
12 00 am Inactivate
10 TV Air 3
Once
BN68-02620B_Eng.indb 17 2010-03-24 �� 11:34:36
18
English
Basic Features
Locking Programs ¦
MENU
O m
Setup V-Chip ENTER
E
V-Chip
The V-Chip feature automatically locks out programs that are
deemed inappropriate for children. The user must enter a PIN
(personal ID number) before any of the V-Chip restrictions are
set up or changed.
NOTE
V-Chip
x
function is not available in HDMI,
Component or PC mode.
The default PIN number of a new TV set is "0-0-0-0"
x
Allow all
x
: Press to unlock all TV ratings.
Block all
x
: Press to lock all TV ratings.
Change PIN : The Change PIN screen will appear.
Choose any 4 digits for your PIN and enter them. As
soon as the 4 digits are entered, the Confirm New
PIN screen appears. Re-enter the same 4 digits. When
the Confirm screen disappears, your PIN has been
memorized.
If you forget the PIN, press the remote-control
buttons in the following sequence, which resets
the pin to "0-0-0-0" : POWER (off) MUTE 8
2 4 POWER (on).
V-Chip Lock (Off / On) : You can block rated TV
Programs.
TV Parental Guidelines : You can block TV programs
depending on their rating. This function allows you to
control what your children are watching.
TV-Y: Young children / TV-Y7: Children 7 and over /
TV-G: General audience / TV-PG: Parental guidance /
TV-14: Viewers 14 and over / TV-MA: Mature audience
ALL: Lock all TV ratings. / FV: Fantasy violence /
V: Violence / S: Sexual situation / L: Adult Language /
D: Sexually Suggestive Dialog
The V-Chip will automatically block certain
categories dealing with more sensitive material.
For example, if you block TV-Y category, then
TV-Y7 will automatically be blocked. Similarly, if you
block the TV-G category, then all the categories
in the young adult group will be blocked (TV-G,
TV-PG, TV-14 and TV-MA). The sub-ratings (D, L,
S, V) work together similarly. So, if you block L sub-
rating in TV-PG, then the L sub-ratings in TV-14
and TV-MA will automatically be blocked.
MPAA Rating : You can block movies depending on
their MPAA rating. The Motion Picture Association of
America(MPAA) has implemented a rating system that
provides parents or guardians with advance information
on which films are appropriate for children.
G: General audience (no restrictions). / PG: Parental
guidance suggested. / PG-13: Parents strongly
cautioned. / R: Restricted. Children under 17 should be
accompanied by an adult. / NC-17: No children under
age 17. / X: Adults only. / NR: Not rated.
The V-Chip will automatically block any category
that is ‘More restrictive’. For example, if you block
the PG-13 category, then R, NC-17 and X will
automatically be blocked also.
Canadian English
C: Programming intended for children under age 8. /
C8+: Programming generally considered acceptable for
children 8 years and over to watch on their own. /
G: General programming, suitable for all audiences. /
PG: Parental Guidance. / 14+: Programming contains
themes or content which may not be suitable for viewers
under the age of 14. / 18+: Adult programming.
The
V-Chip will automatically block any category
that is ‘More restrictive’. For example, if you
block G category, then PG, 14+ and 18+ will
automatically be blocked also.
Canadian French
G: General / 8 ans+: Programming generally considered
acceptable for children 8 years and over to watch
on their own. / 13 ans+: Programming may not be
suitable for children under the age of 13. / 16 ans+:
Programming is not suitable for children under the age of
16. / 18 ans+: Programming restricted to adults.
The
V-Chip will automatically block any category
that is ‘More restrictive’. For example, if you block
8 ans+ category, then 13 ans+, 16 ans+ and 18
ans+ will automatically be blocked also.
Downloadable U.S. Rating : Parental restriction
information can be used while watching DTV channels.
NOTE
If information is not downloaded from the
x
broadcasting station, the Downloadable U.S. rating
menu is deactivated.
Parental restriction information is automatically
x
downloaded while watching DTV channels. It may
take several seconds.
The
x
Downloadable U.S. rating menu is available
for use after information is downloaded from the
broadcasting station. However, depending on the
information from the broadcasting station, it may not
be available for use.
Parental restriction levels differ depending on the
x
broadcasting station. The default menu name and
Downloadable US rating changes depending on the
downloaded information.
BN68-02620B_Eng.indb 18 2010-03-24 �� 11:34:36
19
English
03 Basic Features
Even if you set the On-screen display to your desired
x
language, the Downloadable U.S. Rating menu will
appear in English only.
The rating will automatically block certain categories
x
that are more restrictive.
The rating titles (For example: Humor Level..etc) and
x
TV ratings (For example: DH, MH, H..etc) may differ
depending on the broadcasting station.
How to watch a restricted channel
If the TV is tuned to a restricted channel, the V-Chip will
block it. The screen will go blank and the following message
will appear: This channel is blocked by V-Chip. Please
enter the PIN to unblock.
If you forget the PIN, press the remote-control buttons
in the following sequence, which resets the pin to 0-0-
0-0 : POWER (off) MUTE 8 2 4 POWER
(on)
Other Features ¦
MENU
O m
Setup ENTER
E
Language
Set the menu language.
1. Select Language and press the ENTER
E
button.
2. Choose desired language and press the ENTER
E
button.
Choose between
English, Español and Français.
Caption
(On-Screen Text Messages)
Caption (Off / On) : You can switch the
caption function on or off. If captions are
not available, they will not be displayed
on the screen.
The Caption feature does not
work in Component, HDMI or PC
modes.
Caption Mode : You can select the desired caption
mode.
The availability of captions depends on the
program being broadcasted.
Default / CC1~CC4 / Text1~Text4: (analog channels
only) The Analog Caption function operates in either
analog TV channel mode or when a signal is supplied
from an external device to the TV. (Depending on the
broadcasting signal, the Analog Caption function may or
may not work with digital channels.)
Default / Service1~Service6 / CC1~CC4 /
Text1~Text4: (digital channels only) The Digital Captions
function works with digital channels.
Service1~6
may not be available in digital caption
mode depending on the broadcast.
Digital Caption Options : (digital channels only)
Size: Options include Default, Small, Standard and
Large. The default is Standard.
Font Style: Options include Default and Styles 0 to 7.
The default is Style 0.
Foreground Color: Options include Default, White,
Black, Red, Green, Blue, Yellow, Magenta and Cyan. You
can change the color of the letter. The default is White.
Background Color: Options include Default, White,
Black, Red, Green, Blue, Yellow, Magenta and Cyan.
You can change the background color of the caption.
The default is Black.
Foreground Opacity: This adjusts the opacity of text.
Options include Default, Transparent, Translucent, Solid
and Flashing.
Background Opacity: This adjusts the opacity of
the caption background. Options include Default,
Transparent, Translucent, Solid and Flashing.
Return to Default: This option sets each Size, Font
Style, Foreground Color, Background Color, Foreground
Opacity and Background Opacity to its default.
NOTE
Digital Caption Options
x
are available only
when Default and Service1 ~ Service6 can be
selected in Caption Mode.
The availability of captions depends on the
x
program being broadcasted.
The
x
Default setting follow the standards set by
the broadcaster.
The Foreground and Background cannot be set
x
to have the same color.
You cannot set both the
x
Foreground Opacity
and the Background Opacity to Transparent.
Game Mode (Off / On)
When connecting to a game console such as PlayStation™
or Xbox™, you can enjoy a more realistic gaming experience
by selecting the game menu.
NOTE
Restrictions on game mode (Caution)
x
To disconnect the game console and connect
another external device, set Game Mode to Off in
the setup menu.
If you display the TV menu in Game Mode, the
screen shakes slightly.
Game Mode
x
is not available when the input source
is set to TV or PC.
After connecting the game console, set
x
Game Mode
to On. Unfortunately, you may notice reduced picture
quality.
If
x
Game Mode is On:
Picture mode is set to Standard and Sound mode
is set to Movie.
Equalizer is not available.
MEDIA.P
P
POWER
BN68-02620B_Eng.indb 19 2010-03-24 �� 11:34:37
20
English
Basic Features
Melody (Off / Low / Medium / High)
Set up so that a melody sound comes on when the TV is
powered On or Off.
Only available when the
Input source is set to TV. To
turn the melody off, set Melody to Off.
The
Melody does not play.
When no sound is output from the TV because the
x
MUTE button has been pressed.
When no sound is output from the TV because the
x
volume has been reduced to minimum with the
VOL – button.
When the TV is turned off by
x
Sleep Timer function.
Energy Saving
(Off / Low / Medium / High / Auto)
Adjust the brightness of the TV in order to reduce power
consumption. When watching TV at night, set the Energy
Saving to High to reduce eye fatigue as well as power
consumption.
Support Menu
MENU
O m
Support ENTER
E
Self Diagnosis
Picture Test : Use to check for picture problems. If the
problem continues to occur, check the Color pattern.
Yes: If the test pattern does not appear or there is
noise in the test pattern, select Yes. There may be a
problem with the TV. Contact Samsung’s Call Center for
assistance (1-800-SAMSUNG).
No: If the test pattern is properly displayed, select No.
There may be a problem with your external equipment.
Please check your connections. If the problem persists,
refer to the external device’s user manual.
Sound Test : Use the built-in melody sound to check for
sound problems.
If you hear no sound from the TVs speakers,
before performing the sound test, make sure
Speaker Select is set to TV speaker in the
Sound menu.
The melody will be heard during the test even if
Speaker Select is set to External Speaker or the
sound is muted by pressing the MUTE button.
Yes: If you can hear sound only from one speaker or not
at all during the sound test, select Yes. There may be a
problem with the TV. Contact Samsung’s Call Center for
assistance (1-800-SAMSUNG).
No: If you can hear sound from the speakers, select No.
There may be a problem with your external equipment.
Please check your connections. If the problem persists,
refer to the external device’s user manual.
Signal Strength : (Digital channels only) An HD channel’s
reception quality is either perfect or the channels are
unavailable. Adjust your antenna to increase signal
strength.
Software Upgrade
Upgrades will be possible
by connecting a USB drive
to the USB port. Download
the latest firmware from
samsung.com and save to
the USB drive.
Current Version - the
software already installed in the TV.
Software is represented as ‘Year/Month/Day_Version’.
HD Connection Guide
Refer to this information when connecting external devices
to the TV.
Contact Samsung
View this information when your TV does not work properly
or when you want to upgrade the software. You can find
information regarding our call centers and how to download
products and software.
TV Rear Panel
USB Drive
BN68-02620B_Eng.indb 20 2010-03-24 �� 11:34:37
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68

Samsung LN32C350 Le manuel du propriétaire

Catégorie
Téléviseurs LCD
Taper
Le manuel du propriétaire
Ce manuel convient également à

dans d''autres langues