Sony CDX-CA850X Manuel utilisateur

00US+00COV-U.fm masterpage:Right

Operating Instructions

Mode d’emploi

Manual de instrucciones

Owner’s Record

The model and serial numbers are located on the bottom of the unit.

Record these numbers in the space provided below.

Refer to these numbers whenever you call upon your Sony dealer regarding this product.

Model No. CDX-CA860X/CA850X Serial No.

CDX-CA860X

CDX-CA850X

For installation and connections, see the supplied installation/connections manual.

En ce qui concerne l’installation et les connexions, consulter le manuel

d’installation/raccordement fourni.

Para obtener información sobre la instalación y las conexiones, consulte el manual

de instalación/conexiones suministrado.

3-229-198-11 (1)

US

FR

ES

CDX-CA860X/CA850X

3-229-198-11 (1)

FM

/

AM

Compact Disc mpact Disc sc

Player

2

01US01INT-U.fm masterpage:Right

CDX-CA860X/CA850X

3-229-198-11(1)

Warning

This equipment has been tested and found to

comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable

protection against harmful interference in a

residential installation. This equipment

generates, uses, and can radiate radio frequency

energy and, if not installed and used in

accordance with the instructions, may cause

harmful interference to radio communications.

However, there is no guarantee that interference

will not occur in a particular installation. If this

equipment does cause harmful interference to

radio or television reception, which can be

determined by turning the equipment off and on,

the user is encouraged to try to correct the

interference by one or more of the following

measures:

–Reorient or relocate the receiving antenna.

–Increase the separation between the equipment

and receiver.

–Connect the equipment into an outlet on a

circuit different from that to which the receiver

is connected.

–Consult the dealer or an experienced radio/TV

technician for help.

You are cautioned that any changes or

modifications not expressly approved in this

manual could void your authority to operate this

equipment.

THIS DEVICE COMPLIES WITH PART 15

OF THE FCC RULES. OPERATION IS

SUBJECT TO THE FOLLOWING TWO

CONDITIONS;

(1) THIS DEVICE MAY NOT CAUSE

HARMFUL INTERFERENCE, AND

(2) THIS DEVICE MUST ACCEPT ANY

INTERFERENCE RECEIVED, INCLUDING

INTERFERENCE THAT MAY CAUSE

UNDESIRED OPERATION.

CAUTION

The use of optical instruments with this product

will increase eye hazard.

Welcome !

Thank you for purchasing this Sony Compact

Disc Player. You can enjoy its various features

even more with:

• Display language*

1

choice from English,

French, or Spanish.

• Optional CD/MD units (both changers and

players)*

2

.

• CD TEXT information (displayed when a CD

TEXT disc*

3

is played).

• Supplied controller accessories

Rotary commander RM-X5S

Card remote commander RM-X112

*1 Some display indications do not appear in the

language you select.

*2 This unit works with Sony products only.

*3 A CD TEXT disc is an audio CD that includes

information such as the disc name, artist name,

and track names. This information is recorded on

the disc.

3

00US+00COV-UTOC.fm masterpage:Right

CDX-CA860X/CA850X

3-229-198-11(1)

Table of Contents

Location of controls. . . . . . . . . . . . . . . . . . . . 4

Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Notes on discs . . . . . . . . . . . . . . . . . . . . . . . . 6

Getting Started

Resetting the unit. . . . . . . . . . . . . . . . . . . . . . 7

Detaching the front panel . . . . . . . . . . . . . . . 8

Setting the clock . . . . . . . . . . . . . . . . . . . . . . 9

CD Player

CD/MD Unit (optional)

Playing a disc. . . . . . . . . . . . . . . . . . . . . . . . . 9

Display items. . . . . . . . . . . . . . . . . . . . . . . . 10

Playing tracks repeatedly

— Repeat Play . . . . . . . . . . . . . . . . . . . . 10

Playing tracks in random order

— Shuffle Play . . . . . . . . . . . . . . . . . . . . 10

Labeling a CD

— Disc Memo*. . . . . . . . . . . . . . . . . . . . 11

Locating a disc by name

— List-up* . . . . . . . . . . . . . . . . . . . . . . . 12

Selecting specific tracks for playback

— Bank*. . . . . . . . . . . . . . . . . . . . . . . . . 12

* Functions available with optional CD/MD unit

Radio

Storing stations automatically

— Best Tuning Memory (BTM). . . . . . . 13

Receiving the stored stations. . . . . . . . . . . . 14

Storing only the desired stations . . . . . . . . . 14

Storing station names

— Station Memo. . . . . . . . . . . . . . . . . . . 15

Tuning in a station through a list

— List-up . . . . . . . . . . . . . . . . . . . . . . . . 16

Other Functions

Using the rotary commander. . . . . . . . . . . . 16

Adjusting the sound characteristics . . . . . . 18

Quickly attenuating the sound . . . . . . . . . . 18

Changing the sound and display settings

— Menu . . . . . . . . . . . . . . . . . . . . . . . . . 19

Setting the equalizer . . . . . . . . . . . . . . . . . . 20

Setting the Dynamic Soundstage Organizer

(DSO). . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Selecting the spectrum analyzer . . . . . . . . . 21

Labeling a Motion Display . . . . . . . . . . . . . 21

TV/Video (optional)

Watching the TV. . . . . . . . . . . . . . . . . . . . . 22

Watching a video . . . . . . . . . . . . . . . . . . . . 22

Storing TV channels automatically. . . . . . . 22

Storing only the desired TV channels. . . . . 23

Storing the TV channel names . . . . . . . . . . 23

Displaying the information stored on

a disc. . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Watching the TV or video while listening

to a CD or MD

— Simultaneous Play. . . . . . . . . . . . . . . 24

Additional Information

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . 25

Removing the unit. . . . . . . . . . . . . . . . . . . . 26

Specifications . . . . . . . . . . . . . . . . . . . . . . . 27

Troubleshooting . . . . . . . . . . . . . . . . . . . . . 28

Error displays/Messages . . . . . . . . . . . . . . . 29

4

01US02CD-U.fm masterpage:Right

CDX-CA860X/CA850X

3-229-198-11(1)

Location of controls

Refer to the pages listed for details.

: During Playback : During radio reception : During TV reception

: During menu mode

a SCRL button 10

b DSPL (display mode change) button

10, 11, 21

c Number buttons

(1) REP 10

(2) SHUF 10

14

23

d DSO button 20

e MENU button 9, 11, 12, 13, 15, 19, 20,

21, 22, 24

f SOURCE (Power on/Radio/CD/MD/TV)

button 9, 10, 11, 13, 14, 20, 21, 22, 24

g SEEK buttons (–/+) 18

9

14

23

9, 11, 12, 13, 15, 19, 20, 21, 24

h SOUND button 18

i OFF (Stop/Power off) button 8, 9, 21,

25

j VOL buttons (+/–)

k MODE button

10, 11

13, 14

22

l EQ7 button 20

m LIST button

11, 12

15, 16

23, 24

n DISC buttons (+/–)

10, 12

14, 16

22, 24

9, 11, 12, 13, 15, 19, 20, 21

o ENTER button

12

16

9, 11, 12, 13, 15, 19, 20, 21, 22,

24

p ATT button 18

Card remote commander RM-X112

CD/MD

RADIO

TV

MENU

DISC

–

ATTOFF

SCRL

DSPL

1

4

MODE

2

5

3

6

SOURCE

DISC

+

SEEK

+

SEEK

–

SOUND

ENTER

MENU

LIST

VOL

+

–

REP SHUF

EQ7DSO

Tip

Refer to “Replacing the lithium battery” for details on how

to replace the batteries (page 26).

DISC

–

SOURCE

DISC

+

SEEK

+

SEEK

–

(SEEK)

(–): to select

leftwards/

.

(SEEK)

(+): to select

rightwards/

>

(DISC)

(+): to select upwards

In menu mode, the currently selectable button (s) of

these four are indicated with a “ v” in the display.

(DISC)

(–): to select downwards

CD/MD

RADIO

TV

CD/MD

RADIO

TV

MENU

CD/MD

RADIO

TV

CD/MD

RADIO

TV

CD/MD

RADIO

TV

MENU

CD/MD

RADIO

MENU

5

01US02CD-U.fm masterpage:Right

CDX-CA860X/CA850X

3-229-198-11(1)

a Power on/off button*

b Z (eject) button (located on the front side

of the unit, behind the front panel) 9, 25

c Display window

d OPEN button 8, 9

e Receptor for the card remote

commander and rotary commander

f RESET button (located on the front side of

the unit, behind the front panel) 7

* Warning when installing in a car without

an ACC (accessory) position on the

ignition switch

After turning off the ignition, be sure to press

the power on/off button on the unit (or (OFF)

on the card remote commander or the rotary

commander) for 2 seconds to turn off the

clock display.

Otherwise, the clock display does not turn off

and this causes battery drain.

To turn the unit on, press the power on/off

button (1) on the unit.

Note

If the unit is turned off by pressing the power on/

off button on the unit (or (OFF) on the card

remote commander or the rotary commander) for

2 seconds, the unit cannot be operated with the

card remote commander or the rotary

commander unless the power on/off button on the

unit is pressed or a disc is inserted to activate the

unit.

Main unit

CDX-CA860X/CA850X

OPEN

6

01US02CD-U.fm masterpage:Right

CDX-CA860X/CA850X

3-229-198-11(1)

Precautions

• If your car was parked in direct sunlight, allow

the unit to cool off before operating it.

• Power antennas will extend automatically

while the unit is operating.

• Do not use the CUSTOM FILE feature while

driving, or perform any other function which

could divert your attention from the road.

If you have any questions or problems

concerning your unit that are not covered in this

manual, please consult your nearest Sony dealer.

Moisture condensation

On a rainy day or in a very damp area, moisture

condensation may occur inside the lenses and

display of the unit. Should this occur, the unit

will not operate properly. In such a case, remove

the disc and wait for about an hour until the

moisture has evaporated.

To maintain high sound quality

Be careful not to splash juice or other soft drinks

onto the unit or discs.

Notes on discs

• To keep the disc clean, do not touch the surface.

Handle the disc by its edge.

• Keep your discs in their cases or disc

magazines when not in use.

Do not subject the discs to heat/high

temperature. Avoid leaving them in parked cars

or on dashboards/rear trays.

• Do not attach labels, or use discs with sticky

ink/residue. Such discs may stop spinning

when used, causing a malfunction, or may ruin

the disc.

• Discs with non-standard shapes (e.g., heart,

square, star) cannot be played on this unit.

Attempting to do so may damage the unit. Do

not use such discs.

• You cannot play 8 cm (3 in.) CDs.

• Before playing, clean the discs with a

commercially available cleaning cloth. Wipe

each disc from the center out. Do not use

solvents such as benzine, thinner, commercially

available cleaners, or antistatic spray intended

for analog discs.

7

01US02CD-U.fm masterpage:Right

CDX-CA860X/CA850X

3-229-198-11(1)

Notes on CD-R/CD-RW discs

• You can play CD-Rs (recordable CDs)

designed for audio use on this unit.

Look for this mark to distinguish CD-Rs for

audio use.

This mark denotes that a disc is not for audio use.

• Some CD-Rs (depending on the equipment

used for its recording or the condition of the

disc) may not play on this unit.

• You cannot play a CD-R that is not finalized*.

* A process necessary for a recorded CD-R disc to

be played on the audio CD player.

• You cannot play CD-RWs (rewritable CDs) on

this unit.

Getting Started

Resetting the unit

Before operating the unit for the first time, or

after replacing the car battery or changing the

connections, you must reset the unit.

Remove the front panel and press the RESET

button with a pointed object, such as a ball-point

pen.

Note

Pressing the RESET button will erase the clock setting

and some stored contents.

RESET button

8

01US02CD-U.fm masterpage:Right

CDX-CA860X/CA850X

3-229-198-11(1)

Detaching the front panel

You can detach the front panel of this unit to

protect the unit from being stolen.

Caution alarm

If you turn the ignition switch to the OFF

position without removing the front panel, the

caution alarm will beep for a few seconds.

If you connect an optional amplifier and do not

use the built-in amplifier, the beep sound will be

deactivated.

1 Press the power on/off button on the

unit (or (OFF) on the card remote

commander or the rotary

commander)*.

CD/MD playback or radio reception stops

(the display remains on).

* If your car has no ACC position on the ignition

switch, be sure to turn the unit off by pressing the

power on/off button on the unit (or (OFF) on the

card remote commander or the rotary

commander) for 2 seconds to avoid car battery

drain.

2 Press (OPEN), then slide the front

panel to the right, and gently pull out

the left end of the front panel.

Notes

• If you detach the panel while the unit is still turned

on, the power will turn off automatically to prevent

the speakers from being damaged.

• Do not drop or put excessive pressure on the front

panel and its display window.

• Do not subject the front panel to heat/high

temperature or moisture. Avoid leaving it in parked

cars or on dashboards/rear trays.

Tip

When carrying the front panel with you, use the

supplied front panel case.

Attaching the front panel

Place hole A of the front panel onto the spindle

B on the unit, then lightly push the left side in.

Note

Do not put anything on the inner surface of the front

panel.

1

2

A

B

9

01US02CD-U.fm masterpage:Right

CDX-CA860X/CA850X

3-229-198-11(1)

Setting the clock

The clock uses a 12-hour digital indication.

Example: To set the clock to 10:08

1 Press (MENU), then press either side

of (DISC) repeatedly until “Clock”

appears.

1Press (ENTER).

The hour indication flashes.

2Press either side of (DISC) to set

the hour.

3Press the (+) side of (SEEK).

The minute indication flashes.

4Press either side of (DISC) to set

the minute.

2 Press (ENTER).

The clock starts. After the clock setting is

completed, the display returns to normal play

mode.

Tip

When D.Info mode is set to on, the time is always

displayed (page 19).

CD Player

CD/MD Unit (optional)

In addition to playing a CD with this unit, you

can also control external CD/MD units.

Note

If you connect an optional CD unit with the CD TEXT

function, the CD TEXT information will appear in the

display when you play a CD TEXT disc.

Playing a disc

(With this unit)

1 Press (OPEN) and insert the disc

(labeled side up).

2 Close the front panel.

Playback starts automatically.

If a disc is already inserted, press (SOURCE)

repeatedly until “CD” appears to start playback.

To Press

Stop playback (OFF)

Eject the disc (OPEN) then Z

Skip tracks

–Automatic

Music Sensor

(SEEK) (./>)

[once for each track]

Fast-forward/

reverse

–Manual Search

(SEEK) (m/M)

[hold to desired point]

continue to next page t

10

01US02CD-U.fm masterpage:Right

CDX-CA860X/CA850X

3-229-198-11(1)

Notes

• When the last track on the disc is over, playback

restarts from the first track of the disc.

• With optional unit connected, playback of the same

source will continue on to the optional CD/MD unit.

(With optional unit)

1 Press (SOURCE) repeatedly to select

“CD” or “MD.”

2 Press (MODE) repeatedly until the

desired unit appears.

Playback starts.

Display items

When the disc/track changes, any prerecorded

title*

1

of the new disc/track is automatically

displayed (if the Auto Scroll function is set to

“on,” names exceeding 8 characters will be

scrolled (page 19)).

*1 When pressing (DSPL), “NO D.Name” or “NO

T.Na me ” indicates that there is no Disc Memo

(page 11) or prerecorded name to display.

*2 Only for CD TEXT discs with the artist name.

Notes

• Some characters cannot be displayed.

• For some CD TEXT discs with very many

characters, information may not scroll.

• This unit cannot display the artist name for each

track of a CD TEXT disc.

Tip

When Auto scroll is set to off and the disc/track name

is changed, the disc/track name does not scroll.

Playing tracks repeatedly

— Repeat Play

The disc in the main unit will repeat a track or

the entire disc when it reaches the end. For repeat

play, you can select:

• Repeat 1 — to repeat a track.

• Repeat 2* — to repeat a disc.

* Available only when one or more optional CD/MD

units are connected.

During playback, press (1) (REP)

repeatedly until the desired setting

appears in the display.

Repeat Play starts.

To return to normal play mode, select “Repeat

off.”

Playing tracks in random

order

— Shuffle Play

You can select:

• Shuf 1 — to play the tracks on the current disc

in random order.

• Shuf 2*

1

— to play the tracks in the current

optional CD (MD) unit in random order.

• Shuf All*

2

— to play all the tracks in all the

connected CD (MD) units (including this unit)

in random order.

*1 Available only when one or more optional CD (MD)

units are connected.

*2 Available only when one or more optional CD units,

or two or more optional MD units are connected.

During playback, press (2) (SHUF)

repeatedly until the desired setting

appears in the display.

Shuffle Play starts.

To return to normal play mode, select “Shuf off.”

Note

“Shuf All” will not shuffle tracks between CD units and

MD units.

To Press

Skip discs

–Disc selection

(DISC) (+/–)

To Press

Switch display

item

(DSPL)

Scroll display item (SCRL)

Displayable items

• Disc name*

1

/artist name*

2

• Track title*

1

Track

number

Disc

number

Elapsed

playing time

11

01US02CD-U.fm masterpage:Right

CDX-CA860X/CA850X

3-229-198-11(1)

Labeling a CD

— Disc Memo (For a CD unit with the

CUSTOM FILE function)

You can label each disc with a custom name

(Disc Memo). You can enter up to 8 characters

for a disc. If you label a CD, you can locate the

disc by name (page 12).

Caution

Do not use the CUSTOM FILE feature while

driving, or perform any other function which

could divert your attention from the road.

1 Start playing the disc you want to label

in a CD unit with the CUSTOM FILE

function.

2 Press (MENU), then press either side

of (DISC) repeatedly until “Name Edit”

appears.

3 Press (ENTER).

The unit will repeat the disc during the

labeling procedure.

4 Enter the characters.

1Press the (+)*

1

side of (DISC)

repeatedly to select the desired

character.

A t B t C ... t 0 t 1 t 2 ... t +

t – t

*

... t *

2

t A

*1 For reverse order, press the (–) side of

(DISC).

*2 (blank space)

2Press the (+) side of (SEEK) after

locating the desired character.

If you press the (–) side of (SEEK), you

can move back to the left.

3Repeat steps 1 and 2 to enter the

entire name.

5 To return to normal CD play mode,

press (ENTER).

Tips

• Simply overwrite or enter “” to correct or erase a

name.

• There is another way to start labeling a CD: Press

(LIST) for 2 seconds instead of performing steps 2

and 3. You can also complete the operation by

pressing (LIST) for 2 seconds instead of step 5.

• You can label CDs on a unit without the CUSTOM

FILE function if that unit is connected along with a

CD unit that has the function. The Disc Memo will be

stored in the memory of the CD unit with the

CUSTOM FILE function.

Note

Repeat/shuffle play is suspended until the Name Edit

is complete.

Viewing the Disc Memo

As a display item, the Disc Memo always takes

priority over any original CD TEXT information.

Tip

To find out about other items that can be displayed,

see page 10.

Erasing the Disc Memo

1 Press (SOURCE) repeatedly to select

“CD.”

2 Press (MODE) repeatedly to select the

CD unit storing the Disc Memo.

3 Press (MENU), then press either side

of (DISC) repeatedly until “Name Del”

appears.

4 Press (ENTER).

The stored names will appear.

5 Press either side of (DISC) repeatedly

to select the disc name you want to

erase.

The stored names will appear.

6 Press (ENTER) for 2 seconds.

The name is erased.

Repeat steps 5 and 6 if you want to erase

other names.

7 Press (MENU) twice.

The unit returns to normal CD play mode.

Notes

• When the Disc Memo for a CD TEXT disc is erased,

the original CD TEXT information is displayed.

• If you cannot find the Disc Memo you want to erase,

try selecting a different CD unit in step 2.

To Press

View (DSPL) during CD/CD

TEXT disc playback

12

01US02CD-U.fm masterpage:Right

CDX-CA860X/CA850X

3-229-198-11(1)

Locating a disc by name

— List-up (For a CD unit with the CD TEXT/

CUSTOM FILE function, or an MD unit)

You can use this function for discs that have been

assigned custom names*

1

or for CD TEXT

discs*

2

.

*1 Locating a disc by its custom name: when you

assign a name for a CD (page 11) or an MD.

*2 Locating discs by the CD TEXT information: when

you play a CD TEXT disc on a CD unit with the CD

TEXT function.

1 Press (LIST).

The name assigned to the current disc appears

in the display.

2 Press either side of (DISC) repeatedly

until you find the desired disc.

3 Press (ENTER) to play the disc.

Notes

• Some letters cannot be displayed (exception: Disc

Memo).

• If the TV tuner XT-40V is connected, the list appears

on the TV monitor instead of the display on the unit.

Selecting specific tracks for

playback

— Bank (For a CD unit with the CUSTOM FILE

function)

If you label the disc, you can set the unit to skip

or play the tracks of your choice.

1 Start playing the disc you want to

label.

2 Press (MENU), then press either side

of (DISC) repeatedly until “Bank Sel”

appears.

3 Press (ENTER).

4 Label the tracks.

1Press either side of (SEEK)

repeatedly to select the track you

want to label.

2Press (ENTER) repeatedly to select

“Play” or “Skip.”

5 Repeat step 4 to set “Play” or “Skip”

for all the tracks.

6 Press (MENU) twice.

The unit returns to normal CD play mode.

Notes

• You can set “Play” and “Skip” for up to 24 tracks.

• You cannot set “Skip” for all the tracks on a CD.

13

01US02CD-U.fm masterpage:Right

CDX-CA860X/CA850X

3-229-198-11(1)

Playing specific tracks only

You can select:

• Bank on — to play the tracks with the “Play”

setting.

• Bank inv (Inverse) — to play the tracks with

the “Skip” setting.

1 During playback, press (MENU), then

press either side of (DISC) repeatedly

until “Bank on,” “Bank inv,” or “Bank

off” appears.

2 Press the (+) side of (SEEK) repeatedly

until the desired setting appears.

3 Press (ENTER).

Playback starts from the track following the

current one.

To return to normal play mode, select “Bank off”

in step 2.

Radio

The unit can store up to 6 stations per band

(FM1, FM2, FM3, AM1, and AM2).

Caution

When tuning in stations while driving, use Best

Tuning Memory to prevent accidents.

Storing stations

automatically

— Best Tuning Memory (BTM)

The unit selects the stations with the strongest

signals within the selected band, and stores them

in the order of their frequency.

1 Press (SOURCE) repeatedly to select

the radio.

2 Press (MODE) repeatedly to select the

band.

3 Press (MENU), then press either side

of (DISC) repeatedly until “BTM”

appears.

4 Press (ENTER).

A beep sounds when the setting is stored.

Notes

• If only a few stations can be received due to weak

signals, some number buttons will retain their former

settings.

• When a number is indicated in the display, the unit

starts storing stations from the one currently

displayed.

14

01US02CD-U.fm masterpage:Right

CDX-CA860X/CA850X

3-229-198-11(1)

Receiving the stored stations

1 Press (SOURCE) repeatedly to select

the radio.

2 Press (MODE) repeatedly to select the

band.

3 Press the number button ((1) to (6))

on which the desired station is stored.

Tip

Press either side of (DISC) to receive the stations in

the order they are stored in the memory (Preset

Search function).

If preset tuning does not work

Press either side of (SEEK) to search

for the station (automatic tuning).

Scanning stops when the unit receives a

station. Repeat until the desired station is

received.

Tips

• If automatic tuning stops too frequently, turn on the

Local Seek to limit seek to stations with stronger

signals (see “Changing the sound and display

settings” on page 19).

• If you know the frequency of the station you want to

listen to, press and hold either side of (SEEK) to

locate the approximate frequency, then press

(SEEK) repeatedly to fine adjust to the desired

frequency (manual tuning).

If FM stereo reception is poor

Select monaural reception mode

(see “Changing the sound and display

settings” on page 19).

The sound improves, but becomes monaural

(“ST” disappears).

Note

If interference occurs, this unit will automatically

narrow the reception frequency to eliminate noise (IF

Auto function). In such cases, some FM stereo

broadcasts may become monaural while in the stereo

reception mode.

Tip

To always hear FM stereo broadcasts in stereo, you

can change the IF Auto setting and widen the

frequency signal reception (see “Changing the sound

and display settings” on page 19). Note that some

interference may occur in this setting.

Storing only the desired

stations

You can manually preset the desired stations on

any chosen number button.

1 Press (SOURCE) repeatedly to select

the radio.

2 Press (MODE) repeatedly to select the

band.

3 Press either side of (SEEK) to tune in

the station that you want to store.

4 Press the desired number button ((1)

to (6)) for 2 seconds until “MEM”

appears.

The number button indication appears in the

display.

Note

If you try to store another station on the same number

button, the previously stored station will be erased.

15

01US02CD-U.fm masterpage:Right

CDX-CA860X/CA850X

3-229-198-11(1)

Storing station names

— Station Memo

You can assign a name to each radio station and

store it in memory. The name of the station

currently tuned in appears in the display. You can

assign a name using up to 8 characters for a

station.

Storing the station names

1 Tune in a station whose name you

want to store.

2 Press (MENU), then press either side

of (DISC) repeatedly until “Name Edit”

appears.

3 Press (ENTER).

4 Enter the characters.

1Press the (+)*

1

side of

(DISC) repeatedly to select the

desired character.

A t B t C ... t 0 t 1 t 2 ... t +

t – t

*

... t *

2

t A

*1 For reverse order, press the (–) side of

(DISC).

*2 (blank space)

2Press the (+) side of (SEEK) after

locating the desired character.

If you press the (–) side of (SEEK), you can

move back to the left.

3Repeat steps 1 and 2 to enter the

entire name.

5 Press (ENTER).

Tips

• Simply overwrite or enter “” to correct or erase a

name.

• There is another way to start storing station names:

Press (LIST) for 2 seconds instead of performing

steps 2 and 3. You can also complete the operation

by pressing (LIST) for 2 seconds instead of step 5.

Erasing the station name

1 During radio reception, press (MENU),

then press either side of

(DISC) repeatedly until “Name Del”

appears.

2 Press (ENTER).

3 Press either side of (DISC) repeatedly

to select the station whose name you

want to erase.

4 Press (ENTER) for 2 seconds.

The name is erased.

Repeat steps 3 to 4 if you want to erase other

names.

5 Press (MENU) twice.

The unit returns to normal radio reception

mode.

Note

If you have already erased all of the station names,

“NO Data” appears in step 4.

16

01US02CD-U.fm masterpage:Right

CDX-CA860X/CA850X

3-229-198-11(1)

Tuning in a station through a

list

— List-up

1 During radio reception, press (LIST)

momentarily.

The frequency or the name assigned to the

current station appears in the display.

2 Press either side of (DISC) repeatedly

until you find the desired station.

If no name is assigned to the selected station,

the frequency appears in the display.

3 Press (ENTER) to tune in the desired

station.

Note

If the TV tuner XT-40V is connected, the list appears

on the TV monitor instead of the display on the unit.

Other Functions

You can also control the unit (and optional CD/

MD units) with a rotary commander.

Using the rotary commander

First, attach the appropriate label depending on

how you want to mount the rotary commander.

The rotary commander works by pressing

buttons and/or rotating controls.

Inserting the supplied lithium battery

Tip

For information on lithium battery, refer to “Notes on

lithium battery” (page 26).

SOUND

DSPL

MODE

SOUND

DSPL

MODE

+ side up

x

17

01US02CD-U.fm masterpage:Right

CDX-CA860X/CA850X

3-229-198-11(1)

By pressing buttons

*1 Only if the corresponding optional equipment is

connected.

*2 If your car has no ACC (accessory) position on the

ignition key switch, be sure to press (OFF) for

2 seconds to turn off the clock indication after

turning off the ignition.

To turn the unit on, press the power on/off button

on the unit.

By rotating the control

Rotate and release to:

– Skip tracks.

– Tune in stations automatically.

Rotate, hold, and release to:

– Fast-forward/reverse a track.

– Find a station manually.

By pushing in and rotating the control

Push in and rotate the control to:

– Receive preset stations.

– Change the disc*.

* When an optional CD/MD unit is connected.

Press To

(SOURCE) Change source

(radio/CD/MD*

1

/TV*

1

)

(MODE) Change operation

(radio band/CD unit/MD*

1

unit/TV band*

1

)

(ATT) Attenuate sound

(OFF)*

2

Stop playback or radio

reception

(SOUND) Adjust the sound menu

(DSPL) Change the display item

OFF

Rotate the VOL control

to adjust the volume.

(SOURCE)

(SOUND)

(ATT)

(DSPL)

(OFF)

(MODE)

Turn the dial to change the

direction of infrared rays.

continue to next page t

SEEK/AMS

control

S

O

U

R

C

E

PRESET/DISC

control

18

01US02CD-U.fm masterpage:Right

CDX-CA860X/CA850X

3-229-198-11(1)

Changing the operative direction

The operative direction of controls is factory-set

as shown below.

If you need to mount the rotary commander on

the right hand side of the steering column, you

can reverse the operative direction.

Set the Rev/Nor-select switch to “Rev.”

Adjusting the sound

characteristics

You can adjust the bass, treble, balance, fader,

and subwoofer volume.

The bass and treble levels and subwoofer volume

can be stored independently for each source.

1 Select the item you want to adjust by

pressing (SOUND) repeatedly.

Each time you press (SOUND), the item

changes as follows:

BAS (bass) t TRE (treble) t

BAL (left-right) t FAD (front-rear) t

SUB (subwoofer volume)

2 Adjust the selected item by pressing

either side of (SEEK).

When adjusting with the rotary commander,

press (SOUND) and rotate the VOL control.

Note

Adjust within 3 seconds after selecting the item.

Quickly attenuating the

sound

Press (ATT).

“ATT on” appears in the display momentarily.

To restore the previous volume level, press

(ATT) again.

Tip

When the interface cable of a car telephone is

connected to the ATT lead, the unit decreases the

volume automatically when a telephone call comes in

(Telephone ATT function).

To increase

To decrease

Rev Nor

19

01US02CD-U.fm masterpage:Right

CDX-CA860X/CA850X

3-229-198-11(1)

Changing the sound and

display settings

— Menu

The following items can be set:

Set Up

• Clock (page 9)

• Beep — to turn the beeps on or off.

• Multi language (language selection) — to

change the display language to English,

French, or Spanish.

• P.Out 4.0V/5.5V— to change the pre-out of the

power amplifier to 4.0V or 5.5V. Selectable

only when the unit is turned off. (CDX-

CA860X only)

Note

If the volume is turned up very high when connected

to a power amplifier, the sound may be distorted. In

this case, set P.Out to “4.0V.”

Display

• D.Info (Dual Information) — to display the

clock and the play mode at the same time (on).

Functions only when SA is not set to B-1 – B-5.

• SA (Spectrum Analyzer) (page 21) — to

change the display pattern of the equalizer

display.

• M.Dspl (Motion Display) — to select the

Motion Display mode from “1,” “2,” and “off.”

– Select “1” to show decoration patterns in the

display and activate Demo display.

– Select “2” to show decoration patterns in the

display and deactivate Demo display.

– Select “off” to deactivate the Motion Display.

The Demo display in the M.Dspl 1 mode will

appear about 10 seconds after the unit is turned

off.

• Dimmer — to change the brightness of the

display.

– Select “Auto” to dim the display only when

you turn the lights on.

– Select “on” to dim the display.

– Select “off” to deactivate the Dimmer.

• Contrast — to adjust the contrast if the

indications on the display are not recognizable

because of the unit’s installation position.

• A.Scrl (Auto Scroll)

– Select “on” to scroll all automatically

displayed names exceeding 8 characters.

– When Auto scroll is set to off and the disc/

track name is changed, the disc/track name

does not scroll.

Sound

• HPF (High pass filter) — to select the cut-off

frequency to “off,” “78 Hz,” or “125 Hz.”

• LPF (Low pass filter) — to select the cut-off

frequency to “78 Hz,” “125 Hz,” or “off.”

• Loud (Loudness) — to enjoy bass and treble

even at low volumes. The bass and treble will

be reinforced.

Play Mode

• Local on/off (Local seek mode) (page 14)

– Select “on” to only tune into stations with

stronger signals.

• Mono on/off* (Monaural mode) (page 14)

– Select “on” to hear FM radio/TV stereo

broadcast in monaural. Select “off” to return

to normal mode.

• IF Auto/Wide (page 14)

* This function cannot change the TV sound setting if

the optional TV tuner XT-40V is connected.

1 Press (MENU).

To set A.Scrl, press (MENU) during CD/MD

playback.

2 Press either side of (DISC) repeatedly

until the desired item appears.

3 Press the (+) side of (SEEK) to select

the desired setting (Example: “on” or

“off”).

4 Press (ENTER).

After the mode setting is completed, the

display returns to normal play mode.

Note

The displayed item will differ depending on the source.

Tip

You can easily switch among categories by pressing

either side of (DISC) for 2 seconds.

20

01US02CD-U.fm masterpage:Right

CDX-CA860X/CA850X

3-229-198-11(1)

Setting the equalizer

You can select an equalizer curve for seven

music types (Vocal, Club, Jazz, New Age, Rock,

Custom, and Xplod).

You can store and adjust the equalizer settings

for frequency and level.

Selecting the equalizer curve

1 Press (SOURCE) to select a source

(radio, CD, MD, or TV).

2 Press (EQ7) repeatedly until the

desired equalizer curve.

Each time you press (EQ7), the item

changes.

To cancel the equalizing effect, select “off.”

After 3 seconds, the display returns to the

normal playback mode.

Adjusting the equalizer curve

1 Press (MENU).

2 Press either side of (DISC) repeatedly

until “EQ7 Tune” appears, then press

(ENTER).

3 Press either side of (SEEK) to select

the desired equalizer curve, then

press (ENTER).

Each time you press (SEEK), the item

changes.

4 Select the desired frequency and level.

1Press either side of (SEEK) to select

the desired frequency.

Each time you press (SEEK), the

frequency changes.

62 Hz y 157 Hz y 396 Hz y 1.0 kHz

y 2.5 kHz y 6.3 kHz y 16 kHz

2Press either side of (DISC) to adjust

the desired volume level.

The volume level is adjustable by 1 dB

steps from –10 dB to +10 dB.

To restore the factory-set equalizer curve,

press (ENTER) for 2 seconds.

5 Press (MENU) twice.

When the effect setting is complete, the

normal playback mode appears.

Setting the Dynamic

Soundstage Organizer (DSO)

If your speakers are installed into the lower part

of the doors, the sound will come from below

and may not be clear.

The DSO (Dynamic Soundstage Organizer)

function creates a more ambient sound as if there

were speakers in the dashboard (virtual

speakers).

You can store the DSO setting for each source.

1 Press (SOURCE) to select a source

(radio, CD, MD, or TV).

2 Press (DSO) repeatedly until “DSO

on” appears.

To cancel the DSO function, select “DSO off” in

step 2.

La page est en cours de chargement...

Sony CDX-CA850X Manuel utilisateur

Ce manuel convient également à

Sony CDX-CA850X Manuel utilisateur

dans d''autres langues

Documents connexes