Eaton PWHR1234W2FR Instructions Manual

Eaton
Marque
Eaton
Modèle
PWHR1234W2FR
Catégorie
Batteries UPS
Taper
Instructions Manual

Ce manuel convient également à

p/n: 164201628
Revision C0
For use with the Eaton 9155 (8/15 kVA) UPS,
Eaton 9355 (10/15 kVA) UPS
or Eaton Extended Battery Module (EBM)
Eaton
®®
Internal Battery Instructions
Eaton reserves the right to change specifications without prior notice. Modbus is a registered trademark of Schneider Automation, Inc.
MOXA is a registered trademark and MGate is a trademark of MOXA, Inc. Spiralock is a registered trademark of Spiralock Corporation.
KIRK is a registered trademark of Kirk Key Interlock company, LLC, a subsidiary of Halma plc. National Electrical Code and NEC are
registered trademarks of National Fire Protection Association, Inc. ERIFLEX and FLEXIBAR are registered trademark of Erico International
Corporation. All other trademarks are property of their respective companies.
©Copyright 2006-2019 Eaton, Raleigh, NC, USA. All rights reserved. No part of this document may be reproduced in any way without the
express written approval of Eaton.
!
IMPORTANT
To ensure you have the most up-to-date content and information for this product, please review the
latest manual revision on our website, www.eaton.com/9155 or www.eaton.com/9355.
Internal Battery Instructions for the Eaton 9155 or 9355 (10/15 kVA) 164201628—Rev C0 iii
TTaabbllee ooff CCoonntteennttss
SSaaffeettyy WWaarrnniinnggss aanndd SSyymmbboollss,, CCoonnttrroollss,, aanndd IInnddiiccaattoorrss............................................................................................................................................................................11
Safety Warnings..............................................................................................................................................1
Consignes de Sécurité......................................................................................................................................2
Advertencias de Seguridad ................................................................................................................................3
Symbols, Controls, and Indicators .......................................................................................................................4
IInnssttaallllaattiioonn............................................................................................................................................................................................................................................................................................................55
Battery Type...................................................................................................................................................5
Installing the Internal Batteries ...........................................................................................................................5
iv Internal Battery Instructions for the Eaton 9155 or 9355 (10/15 kVA) 164201628—Rev C0
Table of Contents
Internal Battery Instructions for the Eaton 9155 or 9355 (10/15 kVA) 164201628—Rev C0 1
SSaaffeettyy WWaarrnniinnggss aanndd SSyymmbboollss,, CCoonnttrroollss,, aanndd IInnddiiccaattoorrss
SSaaffeettyy WWaarrnniinnggss
IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS
This manual contains important instructions that you should follow during installation and maintenance of the
UPS and batteries. Please read all instructions before operating the equipment and save this manual for future
reference.
DANGER
This UPS contains LETHAL VOLTAGES. All repairs and service should be performed by AUTHORIZED SERVICE
PERSONNEL ONLY. There are NO USER SERVICEABLE PARTS inside the UPS.
WARNING
The UPS is intended to be operated only with batteries installed. When batteries are not installed a tip hazard
exists that could result in bodily injury.
CAUTION
• Servicing should be performed by qualified service personnel knowledgeable of batteries and required
precautions. Keep unauthorized personnel away from batteries.
• Batteries can present a risk of electrical shock or burn from high short circuit current. The following
precautions should be observed: 1) Remove watches, rings, or other metal objects; 2) Use tools with
insulated handles; 3) Do not lay tools or metal parts on top of batteries; 4) Disconnect charging source prior
to connecting or disconnecting battery terminals; 5) Wear voltage rated gloves and electrical hazard
footwear.
• When replacing batteries, replace with the same type and number of batteries or battery packs. Contact
your service representative to order new batteries.
• Proper disposal of batteries is required. Refer to your local codes for disposal requirements.
• Never dispose of batteries in a fire. Batteries may explode when exposed to flame.
• Do not open or mutilate the battery or batteries. Released electrolyte is harmful to the skin and eyes and
may be extremely toxic.
• Determine if the battery is inadvertently grounded. If inadvertently grounded, remove source of ground.
Contact with any part of a grounded battery can result in electrical shock. The likelihood of such shock will
be reduced if such grounds are removed during installation and maintenance (applicable to equipment and
remote battery supplies not having a grounded supply circuit).
• ELECTRIC ENERGY HAZARD. Do not attempt to alter any battery wiring or connectors. Attempting to alter
wiring can cause injury.
2 Internal Battery Instructions for the Eaton 9155 or 9355 (10/15 kVA) 164201628—Rev C0
CCoonnssiiggnneess ddee SSééccuurriittéé
CONSIGNES DE SÉCURITÉ IMPORTANTES — CONSERVER CES INSTRUCTIONS
Ce manuel comporte des instructions importantes que vous êtes invité à suivre lors de toute procédure
d'installation et de maintenance des batteries et de l'ASI. Veuillez consulter entièrement ces instructions avant
de faire fonctionner l'équipement et conserver ce manuel afin de pouvoir vous y reporter ultérieurement.
DANGER!
Cet onduleur contient des TENSIONS MORTELLES. Toute opération d'entretien et de réparation doit être
EXCLUSIVEMENT CONFIÉE A UN PERSONNEL QUALIFIÉ AGRÉÉ. AUCUNE PIÈCE RÉPARABLE PAR
L'UTILISATEUR ne se trouve dans l'onduleur.
AVERTISSEMENT!
L'ASI est conçue pour fonctionner seulement avec les batteries installées. Lorsque les batteries ne sont pas
installées, il existe un risque de chute pouvant engendrer des dommages corporels.
ATTENTION!
• L'entretien doit être réalisé par du personnel qualifié connaissant bien les batteries et les précautions
nécessaires. N'autorisez aucun personnel non qualifié à manipuler les batteries.
• Les batteries peuvent présenter un risque de choc électrique ou de brûlure provenant d'un courant de
court-circuit haute intensité. Les précautions suivantes doivent être observées : 1) Retirez montre, bagues
ou autres objets métalliques ; 2) Utilisez des outils aux poignées isolantes ; 3) Ne déposez pas d'outils ou
de pièces métalliques sur les batteries ; 4) Déconnectez la source de chargement avant de connecter ou
de déconnecter les bornes de batterie.
• Remplacez uniquement les batteries par des batteries ou blocs de batteries présentant les mêmes type et
numéro.
• Une mise au rebut réglementaire des batteries est obligatoire. Consulter les règlements en vigueur dans
votre localité.
• Ne jamais jeter les batteries au feu. L'exposition aux flammes risque de les faire exploser.
• Vous ne devez en aucun cas ni ouvrir ni détruire la ou les batteries. L'électrolyte qui s'en échappe est
nuisible à la peau et aux yeux et peut s'avérer extrêmement toxique.
• Déterminez si la batterie est mise à la terre par inadvertance. Si celle-ci est mise à la terre par inadvertance,
retirez la source de terre. Tout contact avec une partie d'une batterie mise à la terre peut engendrer un
choc électrique. La probabilité d'un tel choc sera réduite si de telles masses sont retirées durant
l'installation et la maintenance.
Safety Warnings and Symbols, Controls, and Indicators
Internal Battery Instructions for the Eaton 9155 or 9355 (10/15 kVA) 164201628—Rev C0 3
AAddvveerrtteenncciiaass ddee SSeegguurriiddaadd
INSTRUCCIONES DE SEGURIDAD IMPORTANTES — GUARDE ESTAS INSTRUCCIONES
Este manual contiene instrucciones importantes que debe seguir durante la instalación y el mantenimiento del
SIE y de las baterías. Por favor, lea todas las instrucciones antes de poner en funcionamiento el equipo y
guarde este manual para referencia en el futuro.
PELIGRO
Este SIE contiene VOLTAJES MORTALES. Todas las reparaciones y el servicio técnico deben ser efectuados
SOLAMENTE POR PERSONAL DE SERVICIO TÉCNICO AUTORIZADO. No hay NINGUNA PARTE QUE EL
USUARIO PUEDA REPARAR dentro del SIE.
ADVERTENCIA
El SIE está diseñada para hacerla funcionar solamente con las baterías instaladas. Cuando no están instaladas
las baterías, existe un riesgo de inclinación que podría derivar en lesiones corporales.
PRECAUCIÓN
• Personal calificado de servicio que conozca de baterías y esté al tanto de las precauciones requeridas debe
darle servicio al equipo. Mantenga al personal no autorizado alejado de las baterías.
• Las baterías pueden constituir un riesgo de descarga eléctrica o quemaduras por corriente alta de corto
circuito. Debe tomar las siguientes precauciones: 1) Quítese el reloj, los anillos u otros objetos de metal; 2)
Utilice herramientas con manijas aisladas; 3) No coloque las herramientas o piezas de metal en la parte
superior de las baterías; 4) Desconecte la fuente de carga antes de conectar o desconectar las terminales
de las baterías.
• Cuando se reemplacen las baterías, cámbielas con el mismo tipo y número de baterías o paquetes de
baterías.
• Es necesario desechar las baterías de un modo adecuado. Consulte las normas locales para conocer los
requisitos pertinentes.
• Nunca deseche las baterías en el fuego. Las baterías pueden explotar si se las expone a la llama.
• No abra ni corte las baterías. El electrolito liberado es peligroso para la piel y los ojos, y puede ser
extremadamente tóxico.
• Determine si la batería está accidentalmente conectada a tierra. Si está conectada accidentalmente a
tierra, retire la fuente de conexión a tierra. El contacto con cualquier parte de la batería conectada a tierra
puede derivar en descarga eléctrica. La probabilidad de una descarga de este tipo se reducirá si se eliminan
dichas conexiones a tierra durante la instalación y el mantenimiento.
Safety Warnings and Symbols, Controls, and Indicators
4 Internal Battery Instructions for the Eaton 9155 or 9355 (10/15 kVA) 164201628—Rev C0
SSyymmbboollss,, CCoonnttrroollss,, aanndd IInnddiiccaattoorrss
The following are examples of symbols used on the UPS or accessories to alert you to important information:
Special Symbols
The following are examples of symbols used on the UPS or accessories to alert you to important
information:
RISK OF ELECTRIC SHOCK - Observe the warning associated with the risk of
electric shock symbol.
CAUTION: REFER TO OPERATOR'S MANUAL - Refer to your operator's manual for
additional information, such as important operating and maintenance
instructions.
This symbol indicates that you should not discard the UPS or the UPS batteries
in the trash. This product contains sealed, lead‐acid batteries and must be
disposed of properly. For more information, contact your local recycling/reuse or
hazardous waste center.
This symbol indicates that you should not discard waste electrical or electronic
equipment (WEEE) in the trash. For proper disposal, contact your local
recycling/reuse or hazardous waste center.
Eaton, Powerware, and BladeUPS are registered trademarks of Eaton Corporation or its subsidiaries and affiliates.
Phillips and Pozidriv are registered trademarks of Phillips Screw Company.
ECopyright 2008–2010 Eaton Corporation, Raleigh, NC, USA. All rights reserved. No part of this document may be
reproduced in any way without the express written approval of Eaton Corporation.
RISK OF ELECTRIC SHOCK - Observe the warning associated with the risk of electric shock symbol.
Special Symbols
The following are examples of symbols used on the UPS or accessories to alert you to important
information:
RISK OF ELECTRIC SHOCK - Observe the warning associated with the risk of
electric shock symbol.
CAUTION: REFER TO OPERATOR'S MANUAL - Refer to your operator's manual for
additional information, such as important operating and maintenance
instructions.
This symbol indicates that you should not discard the UPS or the UPS batteries
in the trash. This product contains sealed, lead‐acid batteries and must be
disposed of properly. For more information, contact your local recycling/reuse or
hazardous waste center.
This symbol indicates that you should not discard waste electrical or electronic
equipment (WEEE) in the trash. For proper disposal, contact your local
recycling/reuse or hazardous waste center.
Eaton, Powerware, and BladeUPS are registered trademarks of Eaton Corporation or its subsidiaries and affiliates.
Phillips and Pozidriv are registered trademarks of Phillips Screw Company.
ECopyright 2008–2010 Eaton Corporation, Raleigh, NC, USA. All rights reserved. No part of this document may be
reproduced in any way without the express written approval of Eaton Corporation.
CAUTION: REFER TO OPERATOR'S MANUAL - Refer to your operator's manual for additional
information, such as important operating and maintenance instructions.
Special Symbols
The following are examples of symbols used on the UPS or accessories to alert you to important
information:
RISK OF ELECTRIC SHOCK - Observe the warning associated with the risk of
electric shock symbol.
CAUTION: REFER TO OPERATOR'S MANUAL - Refer to your operator's manual for
additional information, such as important operating and maintenance
instructions.
This symbol indicates that you should not discard the UPS or the UPS batteries
in the trash. This product contains sealed, lead‐acid batteries and must be
disposed of properly. For more information, contact your local recycling/reuse or
hazardous waste center.
This symbol indicates that you should not discard waste electrical or electronic
equipment (WEEE) in the trash. For proper disposal, contact your local
recycling/reuse or hazardous waste center.
Eaton, Powerware, and BladeUPS are registered trademarks of Eaton Corporation or its subsidiaries and affiliates.
Phillips and Pozidriv are registered trademarks of Phillips Screw Company.
ECopyright 2008–2010 Eaton Corporation, Raleigh, NC, USA. All rights reserved. No part of this document may be
reproduced in any way without the express written approval of Eaton Corporation.
This symbol indicates that you should not discard the UPS or the UPS batteries in the trash. This
product contains sealed, lead-acid batteries and must be disposed of properly. For more information,
contact your local recycling/reuse or hazardous waste center.
Special Symbols
The following are examples of symbols used on the UPS or accessories to alert you to important
information:
RISK OF ELECTRIC SHOCK - Observe the warning associated with the risk of
electric shock symbol.
CAUTION: REFER TO OPERATOR'S MANUAL - Refer to your operator's manual for
additional information, such as important operating and maintenance
instructions.
This symbol indicates that you should not discard the UPS or the UPS batteries
in the trash. This product contains sealed, lead‐acid batteries and must be
disposed of properly. For more information, contact your local recycling/reuse or
hazardous waste center.
This symbol indicates that you should not discard waste electrical or electronic
equipment (WEEE) in the trash. For proper disposal, contact your local
recycling/reuse or hazardous waste center.
Eaton, Powerware, and BladeUPS are registered trademarks of Eaton Corporation or its subsidiaries and affiliates.
Phillips and Pozidriv are registered trademarks of Phillips Screw Company.
ECopyright 2008–2010 Eaton Corporation, Raleigh, NC, USA. All rights reserved. No part of this document may be
reproduced in any way without the express written approval of Eaton Corporation.
This symbol indicates that you should not discard waste electrical or electronic equipment (WEEE) in
the trash. For proper disposal, contact your local recycling/reuse or hazardous waste center.
Safety Warnings and Symbols, Controls, and Indicators
Internal Battery Instructions for the Eaton 9155 or 9355 (10/15 kVA) 164201628—Rev C0 5
IInnssttaallllaattiioonn
BBaatttteerryy TTyyppee
When purchasing UPS cabinets or extended battery modules without batteries, only the following types are
recommended. Use of any other battery type inside Eaton cabinets will void the product warranty.
CAUTION
When replacing batteries, use the same manufacturer and part number originally supplied with the cabinet to
ensure correct harness fit and terminal landing.
Table 1. Battery Manufactures, Types and Quantity
Battery
Manufacturer
Eaton CSB
®
Battery Co.,
Ltd.
EnerSys
®
, Inc.
GS Yuasa
®
Corporation (Japan
Storage)
Battery Type
PWHR12120W3FR
or
PWHR1234W2FR
HRL1234WFR
NP7-12 and NP7-
12FR or
NPX-35 and NPX-
35FR
PX12090 and
PE12V7.2
Battery Quantity 16 per string 16 per string 16 per string 16 per string
IInnssttaalllliinngg tthhee IInntteerrnnaall BBaatttteerriieess
To install the internal batteries:
1. Remove the UPS front covers that have the
Eaton BladeUPS
®
EBM User's Guide S 164201650 Rev 3 Draft 13-APR-2010
23
Chapter 3 Maintenance
This section explains how to
S Care for the UPS and batteries
S Replace the Extended Battery Modules (EBMs)
S Recycle used batteries or UPS
UPS and Battery Care
For the best preventive maintenance, keep the area around the UPS
clean and dust‐free. If the atmosphere is very dusty, clean the outside of
the system with a vacuum cleaner.
For full battery life, keep the UPS at an ambient temperature of
25°C (77°F).
NOTE The batteries in the UPS are rated for a 3–5 year service life. The length of service
life varies, depending on the frequency of usage and ambient temperature. Batteries used
beyond expected service life will often have severely reduced runtimes. Replace batteries at
least every 5 years to keep units running at peak efficiency.
Storing the UPS and Batteries
If you store the UPS for a long period, recharge the battery every
6 months by connecting the UPS to utility power. The batteries charge
to 80% capacity in less than 5 hours. However, it is recommended that
the batteries charge for 48 hours after long-term storage.
Check the battery recharge date on the shipping carton label. If the date
has expired and the batteries were never recharged, do not use the
UPS. Contact your service representative.
When to Replace Batteries
When the indicator flashes slowly and the audible alarm beeps
intermittently, the batteries may need replacing. Contact your service
representative to order new batteries.
symbol. For Extended Battery Modules (EBMs), remove
all of the front covers.
Press and release the handle latch at the bottom of each cover and then lift the cover up and off the
cabinet (see Figure 1).
6 Internal Battery Instructions for the Eaton 9155 or 9355 (10/15 kVA) 164201628—Rev C0
Figure 1. Removing the Front Cover
2. Remove the 10 M4 screws from the battery cover panel and remove the panel on each battery cabinet
(see Figure 2).
Figure 2. Removing the Battery Cover Panel
3. Remove the battery trays and the bag containing the jumper wires and battery tray wiring harnesses.
4. Insert the batteries into the battery trays.
5. Connect seven jumper wires between the batteries in each tray (see Figure 3).
Installation
Internal Battery Instructions for the Eaton 9155 or 9355 (10/15 kVA) 164201628—Rev C0 7
Figure 3. Connecting the Battery Jumper Wires
Jumper Wires
(
+)
)
( )
6. Connect the negative end (black wire) of the battery tray wiring harness to the negative terminal at the
back end of the battery tray. Route the excess wire in the tray slots to the front of the tray (see Figure 4).
Figure 4. Connecting the Battery Tray Wiring Harness
Battery Tray Wiring Harness
Black Wire
Red Wire
(
+)
( )
Back End
of Tray
Front End of Tray
Tray Slots
Installation
8 Internal Battery Instructions for the Eaton 9155 or 9355 (10/15 kVA) 164201628—Rev C0
7. Connect the positive end (red wire) of the battery tray wiring harness to the positive terminal at the front of
the battery tray.
8. Repeat Step 4 through Step 7 for each battery tray.
9. Load the each battery tray into the UPS, beginning with the top cabinet, as described below (see Figure 5):
All trays are installed with the positive marker toward the front.
WARNING
Circuit contains two strings of 16 batteries in parallel. Verify correct polarity prior to making connections.
Figure 5. Sliding the Battery Trays into the Cabinet
Back End
of Tray
(+)
Front End of Tray
-
( )
Top View
of Tray
10. Verify that the UPS battery circuit breaker is in the OFF position (see Figure 6).
Installation
Internal Battery Instructions for the Eaton 9155 or 9355 (10/15 kVA) 164201628—Rev C0 9
Figure 6. UPS Rear View (Eaton 9155 UPS Shown
11. Connect the cabinet wiring harness to the battery tray wiring harnesses, red connector to red connector,
black connector to black connector (see Figure 7 and Figure 8).
Installation
10 Internal Battery Instructions for the Eaton 9155 or 9355 (10/15 kVA) 164201628—Rev C0
Figure 7. Internal Battery Tray Wiring Connections
Red
Connector
Black
Connector
Black
Connector
Red
Connector
White Wire
Red Black
Wire Wire
Black Black
Red Red
White Wire
Red Red
Black Black
Cabinet
Wiring
Harness
Battery Tray
Wiring
Battery Tray
Wiring
Installation
Internal Battery Instructions for the Eaton 9155 or 9355 (10/15 kVA) 164201628—Rev C0 11
Figure 8. Internal Battery Tray Wiring Diagram
Battery Tray
Assembly
Battery Tray
Assembly
Battery Tray
Assembly
Battery Tray
Assembly
DIAGRAM REPRESENTS
EACH TWO-SHELF
CABINET MODULE
RED
BLACK
WHITE
BLACK
RED
RED
BLACK
WHITE
BLACK
RED
RED
BLACK
RED
BLACK
12. Repeat these steps to connect each battery tray to the cabinet wiring harness.
13. Reinstall the battery cover panel(s).
14. Replace the front cover(s).
Installation
164201628C0
164201628 C0
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16

Eaton PWHR1234W2FR Instructions Manual

Eaton
Marque
Eaton
Modèle
PWHR1234W2FR
Catégorie
Batteries UPS
Taper
Instructions Manual
Ce manuel convient également à
Télécharger le PDF
rapport

dans d''autres langues

Documents connexes

Autres documents