Samsung LN46B550 Manuel utilisateur

LCD TV

user manual

imagine the possibilities

Thank you for purchasing this Samsung product.

To receive more complete service, please

register your product at

www.samsung.com/register

Model Serial No.

BN68-01883E-00

Contact SAMSUNG WORLDWIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG

customer care center.

Comment contacter Samsung dans le monde

Si vous avez des suggestions ou des questions concernant les produits Samsung, veuillez contacter le Service

Consommateurs Samsung.

Country Customer Care Center

Web Site Address

CANADA 1-800-SAMSUNG(726-7864) www.samsung.com/ca

Samsung Electronics Canada Inc., Customer

Service 55 Standish Court Mississauga,

Ontario L5R 4B2 Canada

Samsung Electronique Canada Inc., Service

à la Clientèle 55 Standish Court Mississauga,

Ontario L5R 4B2 Canada

U.S.A 1-800-SAMSUNG(726-7864) www.samsung.com/us

Samsung Electronics America, Inc.

105 Challenger Road

Ridgefield Park, NJ 07660-0511

BN68-01883E-00L02.indb 1 2009-02-26 �� 7:10:20

Important Warranty Information Regarding Television Format Viewing

See the warranty card for more information on warranty terms.

Wide screen format LCD Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen

format full-motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to

ll the screen if your model offers this feature and the images are constantly moving. Displaying stationary graphics and images

on screen, such as the dark sidebars on nonexpanded standard format television video and programming, should be limited to no

more than 5% of the total television viewing per week.

Additionally, viewing other stationary images and text such as stock market reports, video game displays, station logos, web sites

or computer graphics and patterns, should be limited as described above for all televisions. Displaying stationary images that

exceed the above guidelines can cause uneven aging of LCD Displays that leave subtle, but permanent burned-in ghost images in

the LCD picture. To avoid this, vary the programming and images, and primarily display full screen moving images, not stationary

patterns or dark bars.

On LCD models that offer picture sizing features, use these controls to view different formats as a full screen picture.

Be careful in the selection and duration of television formats used for viewing. Uneven LCD aging as a result of format selection

and use, as well as burned-in images, are not covered by your Samsung limited warranty.

U.S.A Only

The product unit accompanying this user manual is licensed under certain intellectual property rights of certain third parties.

In particular, this product is licensed under the following US patents: 5,991,715, 5,740,317, 4,972,484, 5,214,678, 5,323,396,

5,539,829, 5,606,618, 5,530,655, 5,777,992, 6,289,308, 5,610,985, 5,481,643, 5,544,247, 5,960,037, 6,023,490, 5,878,080,

and under US Published Patent Application No. 2001-44713-A1.

This license is limited to private non-commercial use by end-user consumers for licensed contents. No rights are granted for

commercial use. The license does not cover any product unit other than this product unit and the license does not extend to

any unlicensed product unit or process conforming to ISO/IEC 11172-3 or ISO/IEC 13818-3 used or sold in combination with

this product unit. The license only covers the use of this product unit to encode and/or decode audio les conforming to the

ISO/IEC 11172-3 or ISO/IEC 13818-3. No rights are granted under this license for product features or functions that do not

conform to the ISO/IEC 11172-3 or ISO/IEC 13818-3.

Other countries

The product unit accompanying this user manual is licensed under certain intellectual property rights of certain third parties.

This license is limited to private non-commercial use by end-user consumers for licensed contents. No rights are granted for

commercial use. The license does not cover any product unit other than this product unit and the license does not extend to

any unlicensed product unit or process conforming to ISO/IEC 11172-3 or ISO/IEC 13818-3 used or sold in combination with

this product unit. The license only covers the use of this product unit to encode and/or decode audio les conforming to the

ISO/IEC 11172-3 or ISO/IEC 13818-3. No rights are granted under this license for product features or functions that do not

conform to the ISO/IEC 11172-3 or ISO/IEC 13818-3.

SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED WARRANTY STATEMENT

Subject to the requirements, conditions, exclusions and limitations of the original Limited Warranty supplied with Samsung

Electronics (SAMSUNG) products, and the requirements, conditions, exclusions and limitations contained herein, SAMSUNG

will additionally provide Warranty Repair Service in the United States on SAMSUNG products purchased in Canada, and

in Canada on SAMSUNG products purchased in the United States, for the warranty period originally specied, and to the

Original Purchaser only.

The above described warranty repairs must be performed by a SAMSUNG Authorized Service Center. Along with this

Statement, the Original Limited Warranty Statement and a dated Bill of Sale as Proof of Purchase must be presented to the

Service Center. Transportation to and from the Service Center is the responsibility of the purchaser.

Conditions covered are limited only to manufacturing defects in material or workmanship, and only those encountered in

normal use of the product.

Excluded, but not limited to, are any originally specied provisions for, in-home or on-site services, minimum or maximum

repair times, exchanges or replacements, accessories, options, upgrades, or consumables.

For the location of a SAMSUNG Authorized Service Center, please call toll-free:

In the United States : 1-800-SAMSUNG (1-800-726-7864)

In Canada : 1-800-SAMSUNG

Precautions When Displaying a Still Image

A still image may cause permanent damage to the TV screen

Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention. This image

retention is also known as “screen burn”. To avoid such image retention, reduce the degree of brightness and contrast of the

screen when displaying a still image.

Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the left,

right and center of the screen caused by the difference of light emission on the screen.

Playing a DVD or a game console may cause a similar effect to the screen.

Damages caused by the above effect are not covered by the Warranty.

Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images.

To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.

❑

N

●

N

❑

●

BN68-01883E-00L02.indb 1 2009-02-26 �� 7:10:20

English - 1

General Information

List of Features .....................................................................2

Accessories ..........................................................................2

Viewing the Control Panel ....................................................3

Viewing the Connection Panel ..............................................4

Remote Control ....................................................................5

Installing Batteries in the Remote Control ............................5

Connections

Connecting VHF and UHF Antennas ....................................6

Connecting Cable TV ...........................................................6

Connecting a DVD / Blu-ray player / Cable Box / Satellite receiver

(Set-Top Box) via HDMI ............................................................. 7

Connecting a DVD / Blu-ray player / Cable Box / Satellite

receiver (Set-Top Box) via DVI .............................................8

Connecting a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top

Box) via Component cables ......................................................................8

Connecting a VCR ................................................................9

Connecting a Digital Audio System ......................................9

Connecting an Amplier / DVD Home Theater ...................10

Connecting a Camcorder....................................................11

Connecting a PC ................................................................12

Operation

Viewing the menus .............................................................13

Plug & Play Feature............................................................14

Channel Control

Conguring the Channel Menu ...........................................15

Managing Channels ...........................................................15

Picture Control

Conguring the Picture Menu .............................................17

Using Your TV as a Computer (PC) Display .......................19

Setting up the TV with your PC ..........................................20

■

Sound Control

Conguring the Sound Menu ..............................................21

Setup

Conguring the Setup Menu ...............................................22

Input / Support

Conguring the Input Menu ................................................26

Conguring the Support Menu............................................26

Media Play (USB)

Using the Media Play (USB) Function ................................27

Using the Media Play (USB) Menu .....................................28

Using the PHOTO (JPEG) List ...........................................28

Using the MP3 List .............................................................30

Anynet

+

Connecting Anynet

+

Devices .............................................32

Setting Up Anynet

+ .............................................................33

Switching between Anynet

+

Devices ..................................33

Recording ...........................................................................34

Listening through a Receiver (Home theater).....................35

Troubleshooting for Anynet

+

...............................................

35

Appendix

Troubleshooting ..................................................................36

Installing the Stand .............................................................37

Disconnecting the Stand.....................................................37

Wall Mount Kit Specications (VESA) ................................38

Using the Anti-Theft Kensington Lock ................................38

Securing the TV to the Wall ................................................39

Specications .....................................................................40

Dimensions .........................................................................41

■

CONTENTS

License

TruSurround HD, SRS and Symbol are trademarks of SRS Labs, Inc.

TruSurround HD technology is incorporated under license from SRS Labs, Inc.

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks

of Dolby Laboratories.

Symbol

N O T

Note One-Touch Button TOOL Button

❑

English

BN68-01883E-00L02.indb 1 2009-02-26 �� 7:10:21

English - 2

GENERAL INFORMATION

Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance.

Product design and specications may be changed without notice in order to enhance product performance.

List of Features

Adjustable picture settings that can be stored in the TV’s memory.

Automatic timer to turn the TV on and off.

A special sleep timer.

Excellent Digital Interface & Networking :

With a built-in HD digital tuner, non-subscription HD broadcasts can be viewed with no Cable Box/Satellite receiver (Set-Top

Box) needed.

HDMI/DVI connection of your PC to this TV.

Excellent Picture Quality

SRS TruSurround HD provides a virtual surround system.

Accessories

Remote Control (BN59-00852A) &

Batteries (AAA x 2)

Power Cord (3903-000144) TV-Holder & Screw (M4 X 16)

(BN96-10788A)

(Depending on the model)

Cover-Bottom

(LN32B550 : BN63-05466A)

(LN37B550 : BN63-05468A)

(LN40B550 : BN63-05468A)

(LN40B550 : BN63-05469A)

(LN52B550 : BN63-05469A)

Screw (M4 X L16)

(6002-001294)

Screw (M4 X L14)

(LN32B550 : 6003-001334)

Owner’s Instructions Warranty Card /

Safety Guide

Cleaning Cloth (BN63-01798B)

Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer.

The items color and shape may vary depending on the model.

N

¦

●

¦

N

BN68-01883E-00L02.indb 2 2009-02-26 �� 7:10:21

English - 3

Viewing the Control Panel

The product color and shape may vary depending on the model.

The front panel buttons can be activated by touching them with your nger.

1

SPEAKERS

2

REMOTE CONTROL SENSOR: Aim the remote control towards this spot on the TV.

3

SOURCE

E

: Toggles between all the available input sources. In the on-screen menu, use this button as you use the

ENTER

E

button on the remote control.

4

MENU: Press to see an on-screen menu of your TV’s features.

5

y

: Press to increase or decrease the volume. In the on-screen menu, use the

y

buttons as you would use the

◄ and ► buttons on the remote control.

6

z

: Press to change channels. In the on-screen menu, use the

z

buttons as you would use the ▼ and ▲

buttons on the remote control.

7

POWER INDICATOR: Blinks and turns off when the power is on and lights up in stand-by mode.

8

P

(POWER): Press to turn the TV on and off.

¦

N

1

3 4 5 62 78

BN68-01883E-00L02.indb 3 2009-02-26 �� 7:10:22

English - 4

Viewing the Connection Panel

The product color and shape may vary depending on the model.

1

HDMI IN 1(DVI), 2, 3, 4 / DVI AUDIO IN [R-AUDIO-L]

Connects to the HDMI jack of a device with an HDMI output.

No sound connection is needed for an HDMI to HDMI connection.

Use the HDMI IN 1 (DVI) jack for DVI connection to an external device. Use a DVI to HDMI cable or DVI-HDMI

adapter (DVI to HDMI) for video connection and the DVI AUDIO IN [R-AUDIO-L] jacks for audio.

When using an HDMI/DVI cable connection, you must use the HDMI IN 1 (DVI) jack.

You can also use the ports to connect to a PC.

2

PC IN [PC] / [AUDIO]

Connects to the video and audio output jacks on your PC.

3

DIGITAL AUDIO OUT (OPTICAL)

Connects to a Digital Audio component such as a Home theater receiver.

4

EX-LINK

Connector for service only.

5

AUDIO OUT

Connects to the audio input jacks on your Amplier/Home theater.

6

USB

Connector for software upgrades and Media Play, etc.

7

AV IN 2

Video and audio inputs for external devices, such as a camcorder or VCR.

8

ANT IN

Connects to an antenna or cable TV system.

9

COMPONENT IN 1, 2 / AV IN 1

Connects Component video / audio. The COMPONENT IN 1 jack is also used as the AV IN 1 jack.

Connect the video cable to the COMPONENT IN 1 [Y/VIDEO] jack and the audio cable to the COMPONENT IN 1

[R-AUDIO-L] jacks.

0

KENSINGTON LOCK

The Kensington Lock (optional) is a device used to physically x the system when used in a public place. If you want to

use a locking device, contact the dealer where you purchased the TV.

The location of the Kensington Lock may be different depending on its model.

!

POWER INPUT

Connects the supplied power cord.

¦

N

–

N

–

N

–

N

–

1

!

0

89

1

6

7

2 3 4 5

[TV Rear Panel]

[TV Side Panel]

BN68-01883E-00L02.indb 4 2009-02-26 �� 7:10:22

English - 5

Remote Control

You can use the remote control up to a distance of about 23 feet from the TV.

The performance of the remote control may be affected by bright light.

The product color and shape may vary depending on the model.

N

1

POWER: Turns the TV on and

off.

2

TV: Selects the TV mode directly

3

NUMERIC BUTTONS: Press to

change the channel.

4

_: Press to select additional

channels (digital) being

broadcast by the same station.

For example, to select channel

‘54-3’, press ‘54’, then press _

and ‘3’.

5

MUTE

M

: Press to temporarily

cut off the sound.

6

y

: Press to increase or

decrease the volume.

7

CH LIST: Used to display

Channel Lists on the screen.

8

TOOLS: Use to quickly select

frequently used functions.

9

INFO: Press to display

information on the TV screen.

0

COLOR BUTTONS: Use these

buttons in the Channel list menus

etc.

!

MEDIA.P: Allows you to play

music les, pictures, and movies.

@

P.MODE: Press to select the

picture mode.

#

Use these buttons in the DMA

and Anynet

+

modes. (

∏

: This

remote can be used to control

recording on Samsung recorders

with the Anynet

+

feature)

$

ON/OFF

@

: Pressing the

ON/OFF

@

light button toggles

between on and off. When the

remote control is on, and a

button is pressed on the remote

control, the remote control

buttons will be lit for a moment.

(Using the remote control with

the ON/OFF

@

light button

set to On will reduce the battery

usage time.)

%

PRE-CH: Enables you to return

to the previous channel you were

watching.

^

z

: Press to change

channels.

&

SOURCE: Press to display

and select the available video

sources.

*

FAV.CH: Press to switch to your

favorite channels.

(

MENU: Displays the main on-

screen menu.

)

RETURN: Returns to the

previous menu.

a

 UP▲/DOWN▼/LEFT◄/

RIGHT►/ENTER

E

: Use to

select on-screen menu items and

change menu values.

b

EXIT: Press to exit the menu.

c

P.SIZE: Picture size selection.

d

SRS: Selects SRS TruSurround

HD mode.

e

CC: Controls the caption

decoder.

f

MTS: Press to choose stereo,

mono or Separate Audio

Program (SAP broadcast).

Installing Batteries in the Remote Control

1. Lift the cover at the back of the remote control upward as shown in the gure.

2.

Install two AAA size batteries.

Make sure to match the ‘+’ and ‘–’ ends of the batteries with the diagram inside the

compartment.

3.

Replace the cover.

Remove the batteries and store them in a cool, dry place if you won’t be using the

remote control for a long time. (Assuming typical TV usage, the batteries should last for about one year.)

If the remote control doesn’t work, check the following:

Is the TV power on?

Are the plus and minus ends of the batteries reversed?

Are the batteries drained?

Is there a power outage or is the power cord unplugged?

Is there a special uorescent light or neon sign nearby?

¦

N

●

1

$

%

^

&

*

(

)

a

b

c

d

e

f

2

3

4

5

6

7

8

9

0

!

@

#

BN68-01883E-00L02.indb 5 2009-02-26 �� 7:10:23

English - 6

CONNECTIONS

Connecting VHF and UHF Antennas

If your antenna has a set of leads that look like the diagram to the right, see ‘Antennas with 300

Ω Flat Twin Leads’ below.

If your antenna has one lead that looks like the diagram to the right, see ‘Antennas with 75 Ω

Round Leads’.

If you have two antennas, see ‘Separate VHF and UHF Antennas’.

Antennaswith300ΩFlatTwinLeads

If you are using an off-air antenna (such as a roof antenna or ‘rabbit ears’) that has 300Ω twin

at leads, follow the directions below.

1.

Place the wires from the twin leads under the screws on a 300-75 Ω adapter (not

supplied). Use a screwdriver to tighten the screws.

2.

Plug the adaptor into the ANT IN terminal on the back of the TV.

Antennaswith75ΩRoundLeads

Plug the antenna lead into the ANT IN terminal on the back of the TV.

Separate VHF and UHF Antennas

If you have two separate antennas for your TV (one VHF and one UHF), you must combine

the two antenna signals before connecting the antennas to the TV. This procedure requires an

optional combiner-adaptor (available at most electronics shops).

1.

Connect both antenna leads to the combiner.

2.

Plug the combiner into the ANT IN terminal on the bottom of the rear panel.

Connecting Cable TV

To connect to a cable TV system, follow the instructions below.

Cable without a Cable Box

Plug the incoming cable into the ANT IN terminal on the back of the TV.

Because this TV is cable-ready, you do not need a cable box to view unscrambled cable

channels.

Connecting to a Cable Box that Descrambles All Channels

1. Find the cable that is connected to the ANT OUT terminal on your cable box.

This terminal might be labeled ‘ANT OUT’, ‘VHF OUT’ or simply, ‘OUT’.

2.

Connect the other end of this cable to the ANT IN terminal on the back of the TV.

¦

N

ANT IN

UHF

VHF

ANT IN

UHF

VHF

ANT IN

ANT IN ANT OUT

ANT IN

BN68-01883E-00L02.indb 6 2009-02-26 �� 7:10:23

English - 7

Connecting to a Cable Box that Descrambles Some Channels

If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need a two-

way splitter, an RF (A/B) switch and four lengths of RF cable. (These items are available at most electronics stores.)

1. Find and disconnect the cable that is connected to the ANT IN terminal on your cable box.

This terminal might be labeled ‘ANT IN’, ‘VHF IN’ or simply, ‘IN’.

2.

Connect this cable to a two-way splitter.

3.

Connect an RF cable between the OUTPUT terminal on the splitter and the IN terminal on the cable box.

4.

Connect an RF cable between the ANT OUT terminal on the cable box and the B–IN terminal on the RF(A/B) switch.

5.

Connect another cable between the other OUT terminal on the splitter and the A–IN terminal on the RF (A/B) switch.

6.

Connect the last RF cable between the OUT terminal on the RF (A/B) switch and the ANT IN terminal on the rear of the TV.

After you have made this connection, set the A/B switch to the ‘A’ position for normal viewing. Set the A/B switch to the ‘B’

position to view scrambled channels. (When you set the A/B switch to ‘B’, you will need to tune your TV to the cable box’s

output channel, which is usually channel 3 or 4.)

Connecting a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) via HDMI

This connection can only be made if there is an HDMI Output connector on the external device.

1. Connect an HDMI Cable between the HDMI IN 1 (DVI), 2, 3 or 4 jack on the TV and the HDMI jack on the DVD / Blu-ray

Player or Cable Box / Satellite receiver (Set-Top Box).

What is HDMI?

HDMI(High-Denition Multimedia Interface), is an interface that enables the transmission of digital audio and video signals

using a single cable.

The difference between HDMI and DVI is that the HDMI device is smaller in size and has the HDCP (High Bandwidth Digital

Copy Protection) coding feature installed.

Each DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) has a different back panel conguration.

The TV may not output sound and pictures may be displayed with abnormal color when DVD / Blu-ray player / Cable Box /

Satellite receiver (Set-Top Box) supporting HDMI versions older than 1.3 are connected. When connecting an older HDMI

cable and there is no sound, connect the HDMI cable to the HDMI IN 1 (DVI) jack and the audio cables to the DVI AUDIO

IN [R-AUDIO-L] jacks on the back of the TV. If this happens, contact the company that provided the DVD / Blu-ray player /

Cable Box / Satellite receiver (Set-Top Box) to conrm the HDMI version, then request an upgrade.

HDMI cables that are not 1.3 may cause annoying icker or no screen display.

N

¦

N

●

N

TV Rear Panel

DVD / Blu-ray player / Cable Box /

Satellite receiver (Set-Top Box)

TV Side Panel

TV Rear Panel

oror

1

HDMI Cable (Not supplied)

Splitter

Cable Box

Incoming cable

TV Rear

ANT IN

RF (A/B) Switch

BN68-01883E-00L02.indb 7 2009-02-26 �� 7:10:24

English - 8

Connecting a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) via DVI

This connection can only be made if there is a DVI Output connector on the external device.

1. Connect a DVI to HDMI Cable or DVI-HDMI Adapter between the HDMI IN 1 (DVI) jack on the TV and the DVI jack on the

DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box).

2.

Connect Audio Cables between the DVI AUDIO IN [R-AUDIO-L] jack on the TV and the DVD / Blu-ray player / Cable Box /

Satellite receiver (Set-Top Box).

Each DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) has a different back panel conguration.

When connecting a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box), match the color of the connection

terminal to the cable.

When using an HDMI / DVI cable connection, you must use the HDMI IN 1 (DVI) jack.

Connecting a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) via Component cables

The rear panel jacks on your TV make it easy to connect a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) to

your TV.

1. Connect a Component Cable between the COMPONENT IN (1 or 2) [Y, PB, PR] jacks on the TV and the COMPONENT [Y, PB,

PR] jacks on the DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box).

2.

Connect Audio Cables between the COMPONENT IN(1 or 2) [R-AUDIO-L] jacks on the TV and the AUDIO OUT jacks on the

DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box).

Component video separates the video into Y (Luminance (brightness)), Pb (Blue) and Pr (Red) for enhanced video quality.

Be sure to match the component video and audio connections. For example, if connecting a Component video cable to

COMPONENT IN 1, connect the audio cable to COMPONENT IN 1 also.

Each DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) has a different back panel conguration.

When connecting a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box), match the color of the connection

terminal to the cable.

¦

N

¦

N

TV Rear Panel

DVD / Blu-ray player / Cable Box /

Satellite receiver (Set-Top Box)

2

Audio Cable (Not supplied)

1

Component Cable (Not supplied)

DVD / Blu-ray player / Cable Box /

Satellite receiver (Set-Top Box)

TV Rear Panel

2

Audio Cable (Not supplied)

1

DVI to HDMI Cable (Not supplied)

BN68-01883E-00L02.indb 8 2009-02-26 �� 7:10:24

English - 9

Connecting a VCR

1. Connect a Video Cable between the AV IN 1 [Y/VIDEO] or AV IN 2 [VIDEO] jack on the TV and the VIDEO OUT jack on the

VCR.

2.

Connect Audio Cables between the AV IN (1 or 2) jacks on the TV and the AUDIO OUT jacks on the VCR.

If you have a ‘mono’ (non-stereo) VCR, use a Y-connector (not supplied) to connect to the right and left audio input jacks

of the TV. Alternatively, connect the cable to the ‘R’ jack. If your VCR is stereo, you must connect two cables.

Each VCR has a different back panel conguration.

When connecting a VCR, match the color of the connection terminal to the cable.

When connecting to AV IN 1, the color of the AV IN 1 [Y/VIDEO] jack (Green) does not match the color of the video cable

(Yellow).

Connecting a Digital Audio System

The rear panel jacks on your TV make it easy to connect a Digital Audio System (Home theater/Receiver) to your TV.

1. Connect an Optical Cable between the DIGITAL AUDIO OUT (OPTICAL) jacks on the TV and the Digital Audio Input jacks on

the Digital Audio System.

When a Digital Audio System is connected to the DIGITAL AUDIO OUT (OPTICAL) jack: Decrease the volume of the TV

and adjust the volume level with the system’s volume control.

5.1CH audio is possible when the TV is connected to an external device supporting 5.1CH.

Each Digital Audio System has a different back panel conguration.

When the Home Theater receiver is set to On, you can hear sound output from the TV’s Optical jack. When the TV is

displaying a DTV(air) signal, the TV will send out 5.1 channel sound to the Home theater receiver. When the source is a

digital component such as a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) and is connected to the

TV via HDMI, only 2 channel sound will be heard from the Home Theater receiver. If you want to hear 5.1 channel audio,

connect the digital audio out jack on DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) directly to an

Amplier or Home Theater, not the TV.

¦

N

¦

N

Digital Audio System

1

Optical Cable (Not supplied)

TV Rear Panel

TV Side Panel

2

Audio Cable (Not supplied)

VCR Rear Panel

1

Video Cable (Not supplied)

TV Rear Panel

BN68-01883E-00L02.indb 9 2009-02-26 �� 7:10:25

English - 10

ConnectinganAmplier/DVDHomeTheater

1. Connect Audio Cables between the AUDIO OUT [R-AUDIO-L] jacks on the TV and Audio Input jacks on the Amplier / DVD

Home Theater.

When an audio amplier is connected to the AUDIO OUT [R-AUDIO-L] jacks: Decrease the volume of the TV and adjust

the volume level with the Amplier’s volume control.

Each Amplier/DVD Home Theater has a different back panel conguration.

When connecting an Amplier/DVD Home Theater, match the color of the connection terminal to the cable.

¦

N

TV Rear Panel

1

Audio Cable (Not supplied)

Amplier/DVDHomeTheater

BN68-01883E-00L02.indb 10 2009-02-26 �� 7:10:25

English - 11

Connecting a Camcorder

The side panel jacks on your TV make it easy to connect a camcorder to your TV.

Using a Video Cable

1. Connect a Video Cable between the AV IN 2 [VIDEO] jack on the TV and the VIDEO OUT jack on the camcorder.

2.

Connect Audio Cables between the AV IN 2 [R-AUDIO-L] jacks on the TV and the AUDIO OUT jacks on the camcorder.

Each Camcorder has a different back panel conguration.

When connecting a Camcorder, match the color of the connection terminal to the cable.

Using an HDMI Cable

1. Connect an HDMI Cable between the HDMI 4 jack on the TV and the HDMI OUT jack on the camcorder.

¦

N

TV Side Panel

1

Video Cable (Not supplied)

2

Audio Cable (Not supplied)

Camcorder

TV Side Panel

HD Camcorder

1

HDMI Cable (Not supplied)

BN68-01883E-00L02.indb 11 2009-02-26 �� 7:10:25

English - 12

Connecting a PC

Using a D-Sub Cable

1. Connect a D-Sub Cable between PC IN [PC] connector on the TV and the PC output connector on your computer.

2.

Connect a PC Audio Cable between the PC IN [AUDIO] jack on the TV and the Audio Out jack of the sound card on your

computer.

When connecting a PC, match the color of the connection terminal to the cable.

Using an HDMI/DVI Cable

1. Connect an HDMI/DVI cable between the HDMI IN 1 (DVI) jack on the TV and the PC output jack on your computer.

2.

Connect a 3.5 mm Stereo miniplug / 2RCA Cable between the DVI AUDIO IN [R-AUDIO-L] jack on the TV and the Audio Out

jack of the sound card on your computer.

When using an HDMI/DVI cable connection, you must use the HDMI IN 1 (DVI) terminal.

Using an HDMI Cable

1. Connect an HDMI cable between the HDMI IN 1 (DVI), 2, 3 or 4 jack on the TV and the PC output jack on your computer.

Each PC has a different back panel conguration.

¦

N

TV Rear Panel

PC

2

3.5 mm Stereo mini-plug/2RCA Cable (Not supplied)

1

HDMI/DVI Cable (Not supplied)

TV Rear Panel

PC

1

D-Sub Cable (Not supplied)

2

PC Audio Cable (Not supplied)

PC

TV Rear Panel

TV Side Panel

1

HDMI Cable (Not supplied)

oror

BN68-01883E-00L02.indb 12 2009-02-26 �� 7:10:27

English - 13

OPERATION

Viewing the menus

Before using the TV, follow the steps below to learn how to navigate the menu in order to select

and adjust different functions.

1.

Press the MENU button.

The main menu is displayed on the screen. Its left side has the following icons: Picture,

Sound, Channel , Setup, Input, Application, Support.

2.

Press the ▲ or ▼ button to select one of the icons.

Press the ◄ or ► button to access the icon’s sub-menu.

3.

Press the ▲ or ▼ button to move to items in the menu.

Press the ENTER

E

button to enter items in the menu.

4.

Press the ▲/▼/◄/► button to change the selected items.

Press the RETURN button to return to the previous menu.

5.

Press the EXIT button to exit from the menu.

Using the remote control buttons

Button Operations Button Operations

MENU

Display the main on-screen menu. ▲/▼/◄/►/

ENTER

E

Move the cursor and select an item.

Select the currently selected item.

Conrm the setting.

RETURN

R

Return to the previous menu.

EXIT

e

Exit the on-screen menu.

Example: Setting the TV’s Brightness in the Picture Menu

Adjusting the Brightness to 80

1.

Press the MENU button to display the menu.

2.

Press the ENTER

E

button to select Picture.

3.

Press the ▲ or ▼ button to select Brightness.

4.

Press the ENTER

E

button.

5.

Press the ◄ or ► button until the Brightness changes to 80.

6.

Press the ENTER

E

button.

Press the EXIT button to exit from the menu.

¦

N



N

Mode : Standard

Backlight : 8

Contrast : 95

Brightness : 45

Sharpness : 50

Color : 50

Tint (G/R) : G50/R50

Picture

Mode   :Standard ►

Backlight : 8

Contrast : 95

Brightness : 45

Sharpness : 50

Color : 50

Tint (G/R) : G50/R50

Picture

Backlight : 8

Contrast : 95

Brightness  :45  ►

Sharpness : 50

Color : 50

Tint (G/R) : G50/R50

Advanced Settings

Picture Option

Picture Reset

Picture

Brightness 45

U

Move

L

Adjust

E

Enter

R

Return

Brightness 80

U

Move

L

Adjust

E

Enter

R

Return

Mode : Standard

Backlight : 8

Contrast : 95

Brightness : 45

Sharpness : 50

Color : 50

Tint (G/R) : G50/R50

Picture

BN68-01883E-00L02.indb 13 2009-02-26 �� 7:10:27

English - 14

Plug & Play Feature

When the TV is initially powered on, basic settings proceed automatically and subsequently.

1.

Press the POWER

P

button on the remote control.

You can also use the POWER

P

button on the TV.

The message Select Language of the OSD. is displayed.

2.

Press the ▲ or ▼ button to select the language, then press the ENTER

E

button. The

message Select ‘Home Use’ when installing this TV in your home. is displayed.

3.

Press the ◄ or ► button to select Store Demo or Home Use, then press the ENTER

E

button. The message Select the

Antenna source to memorize. is displayed.

We recommend setting the TV to Home Use mode for the best picture in your home environment.

Store Demo mode is only intended for use in retail environments. If the unit is accidentally set to Store Demo mode and

you want to return to Home Use (Standard): Press the volume button on the TV. When the volume OSD is displayed,

press and hold the MENU button on the TV for 5 seconds.

4.

Press the ▲ or ▼ button to memorize the channels of the selected connection. Press the ENTER

E

button to select Start.

Air: Air antenna signal. / Cable: Cable antenna signal. / Auto: Air and Cable antenna signals.

In Cable mode, you can select the correct signal source among STD, HRC, and IRC by pressing the ▲, ▼, ◄ or ►

button, then press the ENTER

E

button. If you have Digital cable, select the cable system signal source for both Analog

and Digital. Contact your local cable company to identify the type of cable system that exists in your particular area.

5.

Press the ENTER

E

button to select Start. The TV will begin memorizing all of the available channels.

To stop the search before it has nished, press the ENTER

E

button with Stop selected.

After all the available channels are stored, it starts to remove scrambled channels. The Auto program menu then

reappears. Press the ENTER

E

button when channel memorization is complete. The message Set the Clock Mode. is

displayed.

6.

Press the ENTER

E

button.

Press the ▲ or ▼ button to select Auto, then Press the ENTER

E

button. The message Set to daylight saving time. is

displayed. If you select Manual, Set current date and time is displayed.

7.

Press the ▲ or ▼ button to select Off, On or Auto, then press the ENTER

E

button.

8.

Press the ▲ or ▼ button to highlight the time zone for your local area. Press the ENTER

E

button. If you have received a

digital signal, the time will be set automatically. If not, see page 22 to set the clock.

9.

The connection method to provide the best quality HD is offered. After conrming the method, press the ENTER

E

button.

10.

The message Enjoy your watching. is displayed. When you have nished, press the ENTER

E

button.

If you want to reset this feature...

1.

Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then press the ENTER

E

button.

2.

Press the ENTER

E

button again to select Plug & Play.

The Plug & Play feature is only available in the TV mode.

¦

N

Plug & Play

Select Language of the OSD.

Menu Language : English ►

E

Enter

BN68-01883E-00L02.indb 14 2009-02-26 �� 7:10:27

English - 15

CHANNEL CONTROL

ConguringtheChannelMenu

Antenna→Air/Cable

Before your television can begin memorizing the available channels, you must specify the type

of signal source that is connected to the TV (i.e. an Air or a Cable system).

Press the TOOLS button to display the Tools menu. You can also set the Antenna by

selecting Tools→SwitchtoCable(or Switch to Air).

Auto Program

Air: Air antenna signal. / Cable: Cable antenna signal. / Auto: Air and Cable antenna

signals

When selecting the Cable TV system: Selects the cable system. STD, HRC and IRC

identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in

your particular area. At this point the signal source has been selected.

After all the available channels are stored, it starts to remove scrambled channels (Clear Scrambled Channels). The Auto

program menu then reappears.

If you want to stop Auto Programming, press the ENTER

E

button. The Stop Auto Program? message will be displayed.

Select Yes by pressing the ◄ or ► button, then press the ENTER

E

button.

Clear Scrambled Channels (digital channels only)

This function is used to lter out scrambled channels after Auto Program is completed. This process may take up to 20~30

minutes.

To stop searching scrambled channels: Press the ENTER

E

button to select Stop. Press the ◄ button to select Yes, then

press the ENTER

E

button.

This function is only available in Cable mode.

Channel List

For detailed procedures on using the Channel List, refer to the ‘Managing Channels’ instructions.

You can select these options by simply pressing the CH LIST button on the remote control.

Fine Tune (analog channels only)

Use ne tuning to manually adjust a particular channel for optimal reception.

If you do not store the ne-tuned channel in memory, adjustments are not saved.

* will appear next to the name of ne-tuned channels.

To reset the ne tuning setting, press the ▼ button to select Reset, then press the ENTER

E

button.

Managing Channels

Using this menu, you can add / delete or set favorite channels and use the program guide for

digital broadcasts.

All Channels

Shows all currently available channels.

Added Channels

Shows all added channels.

Favorite

Shows all favorite channels.

To select the favorite channels you have set up, press the FAV.CH button on the remote control.

¦

❑

T

❑



N

❑

N

❑

O

❑

N

¦



O

Antenna  :Air  ►

Auto Program

Clear Scrambled Channel

Channel List

Fine Tune

Channel

2 Air

4 Air

4-2 ♥ TV #8

8 Air

13 Air

13-1 ♥ TV #3

Alice’s Adventures in Wonderland

Added Channels

Air

Zoom Select

T

Tools

BN68-01883E-00L02.indb 15 2009-02-26 �� 7:10:28

English - 16

Programmed

Shows all current reserved Programs.

Select a channel in the All Channels, Added Channels or Favorite screen by pressing the ▲ / ▼ buttons, and pressing the

ENTER

E

button. Then you can watch the selected channel.

Using the Color buttons with the Channel List

Green (Zoom): Enlarges or shrinks a channel number.

Yellow (Select): Selects multiple channel lists. You can perform the add / delete or add to Favorite / delete from Favorite

function for multiple channels at the same time. Select the required channels and press the yellow button to set all the

selected channels at the same time. The

c

mark appears to the left of the selected channels.

TOOLS (Tools): Displays the Add (or Delete), Add to Favorite (or Delete from Favorite), Timer Viewing, Channel

Name Edit, Select All (or Deselect All) and Auto Program menus (The Options menus may differ depending on the

situation.)

Channel Status Display Icons

♥ : A channel set as a Favorite.

c

: A channel selected by pressing the yellow button.

(

: A Program currently being broadcast.

)

: A reserved program

Channel List Option Menu (in All Channels / Added Channels / Favorite)

Press the TOOLS button to use the option menu.

Option menu items may differ depending on the channel status.

Add / Delete

You can delete or add a channel to display the channels you want.

All deleted channels will be shown on All Channels menu.

A gray-colored channel indicates the channel has been deleted.

The Add menu only appears for deleted channels.

You can also delete a channel from the Added Channels or Favorite menu in the same

manner.

Add to Favorite / Delete from Favorite

You can set channels you watch frequently as Favorite.

Press the TOOLS button to display the Tools menu. You can also set the add to (or delete

from) Favorites by selecting Tools→AddtoFavorite (or Delete from Favorite).

The ♥ symbol will be displayed and the channel will be set as a favorite.

All favorite channels will be shown in the Favorite menu.

Timer Viewing

If you reserve a program you want to watch, the channel is automatically switched to the reserved channel in the Channel List;

even when you are watching another channel. To reserve a program, set the current time rst. (See page 22.)

Only memorized channels can be reserved.

You can set the channel, month, day, year, hour and minute directly by pressing the number buttons on the remote control.

Reserving a program will be shown in the Programmed menu.

Digital Program Guide and Viewing Reservation

When a digital channel is selected, and you press the ► button, the Program Guide for the channel appears. You can reserve

a program according to the procedures described above.

Channel Name Edit (analog channels only)

Channels can labeled so that their call letters appear whenever the channel is selected.

The names of digital broadcasting channels are automatically assigned and cannot be labeled.

Select All / Deselect All

Select All: You can select all the channels in the channel list.

Deselect All: You can deselect all the selected channels.

You can only select Deselect All when there is a selected channel.

Auto Program

For further details on setting up options, refer to page 15.



N

–

N

–

N



N



T

N



N



N



●

N



N

2 Air

4 Air

4-2 ♥ TV #8

8 Air

13 Air

13-1 ♥ TV #3

Alice’s Adventures in Wonderland

All Channels

Delete

Add to Favorite

Timer Viewing

Channel Name Edit

Select All

Auto Program

Air

Zoom Select

T

Tools

BN68-01883E-00L02.indb 16 2009-02-26 �� 7:10:28

English - 17

Channel List Option Menu (in Programmed)

You can view, modify or delete a reservation.

Press the TOOLS button to use the option menu.

Change Info

Select to change a viewing reservation.

Cancel Schedules

Select to cancel a viewing reservation.

Information

Select to view a viewing reservation. (You can also change the reservation information.)

Select All

Select all reserved Programs.

N



PICTURE CONTROL

ConguringthePictureMenu

Mode

You can select the type of picture which best corresponds to your viewing requirements.

Press the P.MODE button on the remote control repeatedly to select the desired picture

mode.

Dynamic

Selects the picture for increased denition in a bright room.

Standard

Selects the picture for the optimum display in a normal environment.

Movie

Selects the picture for viewing movies in a dark room.

Backlight / Contrast / Brightness / Sharpness / Color / Tint (G/R)

Your television has several setting options that allow you to control the picture quality.

Backlight: Adjusts the brightness of LCD back light.

Contrast: Adjusts the contrast level of the picture.

Brightness: Adjusts the brightness level of the picture

Sharpness: Adjusts the edge denition of the picture.

Color: Adjusts color saturation of the picture.

Tint (G/R): Adjusts the color tint of the picture.

When you make changes to Backlight, Contrast, Brightness, Sharpness, Color or Tint (G/R) the OSD will be adjusted

accordingly.

In PC mode, you can only make changes to Backlight, Contrast and Brightness.

Settings can be adjusted and stored for each external device you have connected to an input of the TV.

The energy consumed during use can be signicantly reduced if the brightness level of the picture is lowered, which will

reduce the overall running cost.

Advanced Settings

Samsung’s new TVs allow you to make even more precise picture settings than previous

models.

Advanced Settings is available in Standard or Movie mode.

In PC mode, you can only make changes to Gamma and White Balance from among the

Advanced Settings items.

BlackTone→Off/Dark/Darker/Darkest

You can select the black level on the screen to adjust the screen depth.

¦

❑

O



❑

●

N

❑

N



1 / 1 / 2009

9:08 am 5 TV3 The

3:15 pm 2 TV3 The Equalizer

5:50 pm 2 TV3

McMillan & Wife

Programmed

Change Info

Cancel Schedules

Information

Select All

Air

Zoom Select

T

Tools

E

Information

Mode  :Standard  ►

Backlight : 8

Contrast : 95

Brightness : 45

Sharpness : 50

Color : 50

Tint (G/R) : G50/R50

Picture

Advanced Settings

Black Tone : Off ►

Dynamic Contrast : Medium

Gamma : 0

Color Space : Native

White balance

Flesh Tone : 0

Edge Enhancement : On

U

Move

E

Enter

R

Return

BN68-01883E-00L02.indb 17 2009-02-26 �� 7:10:28

English - 18

DynamicContrast→Off/Low/Medium/High

You can adjust the screen contrast so that the optimal contrast is provided.

Gamma

You can adjust the primary color (red, green, blue) Intensity. (-3 ~ +3)

Color Space

Color space is a color matrix composed of red, green and blue colors. Select your favorite color space to experience the most

natural color.

Native: Native Color Space offers deep and rich color tone.

Auto: Auto Color Space automatically adjusts to the most natural color tone based on program sources.

White Balance

You can adjust the color temperature for more natural picture colors.

R-Offset / G-Offset / B-Offset / R-Gain / G-Gain / B-Gain: You can adjust the Color ‘temperature’ in the light areas by

changing the values of R, G, B. Recommended for advanced users only.

Reset: The previously adjusted white balance will be reset to the factory defaults.

Changing the adjustment value will refresh the adjusted screen.

Flesh Tone

You can emphasize the pink ‘esh tone’ in the picture.

Changing the adjustment value will refresh the adjusted screen.

EdgeEnhancement→Off/On

You can emphasize object boundaries in the picture.

Picture Options

In PC mode, you can only make changes to the Color Tone and Size from among the

items in Picture Options.

ColorTone→Cool/Normal/Warm1/Warm2

Warm1 or Warm2 is only activated when the picture mode is Movie.

Settings can be adjusted and stored for each external device you have connected to an

input of the TV.

Size

Occasionally, you may want to change the size of the image on your screen. Your TV comes

with six screen size options, each designed to work best with specic types of video input. Your

cable box/satellite receiver may have its own set of screen sizes as well. In general, though, you should view the TV in 16:9 mode

as much as possible.

Alternately, you can press the P.SIZE button on the remote control repeatedly to change the picture size.

16:9 : Sets the picture to 16:9 wide mode.

Zoom1: Magnies the size of the picture on the screen.

Zoom2: Magnies the size of the picture more than Zoom1.

Wide Fit: Enlarges the aspect ratio of the picture to t the entire screen.

4:3 : Sets the picture to 4:3 normal mode.

Screen Fit: Use the function to see the full image without any cutoff when HDMI (720p/1080i/1080p), Component

(1080i/1080p) or DTV (1080i) signals are input.

16:9 Zoom1 Zoom2

Wide Fit 4:3 Screen Fit



●



●

N



N



❑

N



N



O

●

Picture Options

Color Tone : Normal ►

Size : 16:9

Digital NR : Auto

HDMI Black Level : Normal

Film Mode : Off

U

Move

E

Enter

R

Return

16:9

Zoom1

U

Move Zoom2

U

Move

Wide Fit

U

Move

4:3 Screen Fit

BN68-01883E-00L02.indb 18 2009-02-26 �� 7:10:28

La page charge ...

Samsung LN46B550 Manuel utilisateur

Samsung LN46B550 Manuel utilisateur

dans d''autres langues

Documents connexes