Dyna-Glo DGA550SSP-D Manuel utilisateur

Serial Number

Purchase Date

ATTACH YOUR RECEIPT HERE

Español p. 63

Français p. 32

5-BURNER GAS

GRILL

MODEL #DGA550SSP/DGA550SSP-D

Questions, problems, missing parts? Before returning to your retailer, call our customer

service department at 1-877-447-4768, 8:30 a.m. – 4:30 p.m., CST, Monday – Friday,

or e-mail us at [email protected].

1

ANS Z21.58b-2012

CSA 1.6b-2012

Outdoor Cooking

Gas Appliance

70-10-054 Rev 02/2014

2

TABLE OF CONTENTS

Package Contents ............................................................................................................... 3

Hardware Contents.............................................................................................................. 5

Safety Information ............................................................................................................... 5

Preparation .......................................................................................................................... 7

Assembly Instructions.......................................................................................................... 8

Operating Instructions ....................................................................................................... 20

Care and Maintenance ...................................................................................................... 25

Troubleshooting ................................................................................................................. 26

Warranty ............................................................................................................................ 30

Replacement Parts List ..................................................................................................... 31

Assembler/Installer: This instruction manual contains important information necessary for the proper

assembly and safe use of this appliance. Read and follow all warnings and instructions before

assembling and using this appliance. Leave these instructions with the consumer.

Consumer/User: Follow all warnings and instructions when using this appliance.

Keep these instructions for future reference.

DANGER

If you smell gas:

1. Shut off gas to the appliance.

 2.Extinguishopename.

3. Open lid.

4. If odor continues, keep away from

the appliance and immediately

callyourgassupplieroryourre

department.

WARNING:

1.DONOTstoreorusegasolineorotherammable

liquids or vapors in the vicinity of this or any other

appliance.

2. An LP (liquid propane) cylinder not connected for

use shall not be stored in the vicinity of this or any

other appliance.

3. This grill is for outdoor use only and shall not be

used in a building, garage, under overhangs or any

other enclosed area.

4. DO NOT leave a lit grill unattended. Keep children

and pets away from the grill at all times.

5. Failure to follow these instructions could result in

re,explosion,orburnhazardwhichcouldcause

property damage, personal injury or death.

33

P

V

U

O

G

M

N

F

E

D

T

S

W

Q

Z

R

J

K

H

I

B

X

L

Y

A

C

A1

PACKAGE CONTENTS

4

PACKAGE CONTENTS

PART DESCRIPTION QUANTITY

A Bottom shelf 1

B Locking Caster 2

C Caster 2

D Cart Left Side Panel 1

E Cart Right Side Panel 1

F Cart Rear Panel 1

G Upper Door Brace 1

H Left Door Assembly 1

I Right Door Assembly 1

J Door Handle 2

K Door Handle Sleeve 4

L AA Battery 1

M Main Burner Control Knob 5

N Side/Rear Burner Control

Knob

2

PART DESCRIPTION QUANTITY

O Grill Body 1

P Left Shelf Assembly 1

Q Side Burner Cooking Grate 1

R Right Shelf Assembly 1

S Grease Pan 1

T Grease Cup 1

U Lid Handle 1

V LidHandleBezel 2

W Warming Rack 1

X Heat Tent 5

Y Cooking Grate 3

Z Tank Shelf 1

A1 CylinderExclusion 1

5

M6x12 Screw

Qty. 40

M4x10 Screw

Qty. 12

M6x20 Screw

Qty. 4

M4x10 Screw

Qty. 4

NOTE: Preassembled

with door handle.

Plain Washer

Qty. 16

Spring Washer

Qty. 16

M6x25 Screw

Qty. 2

NOTE: Preassembled

with lid handle.

AA

DD

EE

GG

HH

BB

CC

M6x16 Screw

Qty. 10

FF

Please read and understand this entire manual before attempting to assemble, operate or install the

product. If you have any questions regarding the product, please call customer service at

1-877-447-4768, 8:30 a.m. – 4:30 p.m., CST, Monday – Friday.

SAFETY INFORMATION

HARDWARE CONTENTS (shownactualsize)

DO NOTuseinanexplosiveatmosphere.Keepgrillareaclearandfreefromcombustiblematerials,

gasolineandotherammablevaporsandliquids.

DANGER

CALIFORNIA PROPOSITION 65

•Fuelsusedingas,oilred,woodburning,andcharcoalburningappliancesandtheproductsof

combustion of such fuels contain chemicals known to the state of California to cause cancer, birth

defects or other reproductive harm. This product contains chemicals, including lead and lead

compounds, known to the state of California to cause cancer, birth defects or other reproductive harm.

Wash hands after handling.

6

CAUTION

• NEVERusecharcoalorlighteruidwiththegrill.

• DO NOT use gasoline, kerosene or alcohol for lighting.

• The LP gas cylinder used with this appliance must be:

 (a)ConstructedandmarkedinaccordancewiththeSpecicationsforLP-GasCylindersof

the U.S. Department of Transportation (D.O.T.) or the National Standard of Canada, CAN/

CSA-B339, Cylinders, Spheres and Tubes for Transportation of Dangerous Goods; and

Commision, as applicable; and

 (b)Providedwithalistedoverllingpreventiondevice.

(c) Provided with a cylinder connection device compatible with the connector for outdoor cooking

appliances. This grill is not intended to be used in or installed on recreational vehicles and/or

boats.

• NEVERkeepalledcontainerinahotcarorcartrunk.Heatwillcausethegaspressureto

increase, which may open the relief valve and allow gas to escape.

• ALWAYS open grill lid slowly and carefully as heat and steam trapped within the grill can burn you

severely.

• DO NOTstoreorusegasolineorotherammableliquidsorvaporsinthevicinityofthisoranyother

appliance.

• An LP cylinder not connected for use shall not be stored in the vicinity of this or any other appliance.

• This grill is for use with propane gas only (propane cylinder not included).

• NEVER attempt to attach this grill to the self-contained propane system of a boat, camper trailer,

motor home or house.

• DO NOT attempt to move the grill while it is lit or when it is hot. The casters should be locked when

not moving the grill.

DO NOT place the grill under overhead

combustible construction or awnings.

Minimum clearance from sides and back

of unit to combustible construction is 36

in. (914.4 mm).

NOTE: The installation must conform

with local codes or, in the absence of

local codes, with either the National

Fuel Gas Code, ANSI Z223.1/NFPA 54,

Natural Gas and Propane Installation

Code, CSA B149.1, or Propane Storage

and Handling Code, B149.2.

WARNING

SAFETY INFORMATION

36 in.

(91.4 cm)

36 in.

(91.4 cm)

7

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package

contents list and hardware contents list. If any part is missing or damaged, do not attempt to

assemble the product.

Estimated Assembly Time: 50 minutes with two people

Tools Required for Assembly and leak testing (not included): Phillips screwdriver, spray bottle.

SAFETY INFORMATION

• DO NOT use the grill unless it is completely assembled and all parts are securely fastened and tightened.

• Keep all combustible items and surfaces at least 36 in. (91.44 cm) away from the grill at all times.

• DO NOT touch metal parts of grill until it has completely cooled (about 45 minutes) to avoid burns, unless

you are wearing protective gear (pot holders, gloves, BBQ mittens, etc.).

• DO NOT alter this grill in any manner.

• Clean and inspect the hose before each use. If there is evidence of abrasion, wear, cuts, or leaks, the

hose must be replaced prior to operating the appliance. The replacement hose assembly will be that

whichisspeciedbythemanufacturer,listedintherepairpartslistinthismanual.

• Move gas hoses as far away as possible from hot surfaces and dripping hot grease.

• Keep the grill’s valve compartment, burners and circulating air passages clean. Inspect the grill before

eachuse.Donotobstructtheowofgasorventilationair.

• The use of alcohol, prescription or non-prescription drugs may impair the operator’s ability to properly

assemble or safely operate the grill.

• DO NOT leave a lit grill unattended. Keep children and pets away from the grill at all times.

• DO NOTplacethisgrillonanytypeoftabletopsurface.Thegrillshouldbeplacedonaatandlevel

surface.

• DO NOT use the grill in high winds.

ASSEMBLY INSTRUCTIONS

1. Attach two locking casters (B) to the rear of the

bottom shelf (A) and secure using four plain

washers (BB), four spring washers (CC), and

fourM6x12screws(AA)foreachlocking

caster (B).

1

2

CC

B

AA

BB

A

1

Hardware Used

M6x12Screw

Plain washer

Spring washer

x8

AA

BB

CC

M6x12 Screw

Qty. 40

M4x10 Screw

Qty. 12

M6x20 Screw

Qty. 4

M4x10 Screw

Qty. 4

NOTE: Preassembled

with door handle.

Plain Washer

Qty. 16

Spring Washer

Qty. 16

M6x25 Screw

Qty. 2

NOTE: Preassembled

with lid handle.

AA

DD

EE

GG

HH

BB

CC

M6x16 Screw

Qty. 10

FF

M6x12 Screw

Qty. 40

M4x10 Screw

Qty. 12

M6x20 Screw

Qty. 4

M4x10 Screw

Qty. 4

NOTE: Preassembled

with door handle.

Plain Washer

Qty. 16

Spring Washer

Qty. 16

M6x25 Screw

Qty. 2

NOTE: Preassembled

with lid handle.

AA

DD

EE

GG

HH

BB

CC

M6x16 Screw

Qty. 10

FF

M6x12 Screw

Qty. 40

M4x10 Screw

Qty. 12

M6x20 Screw

Qty. 4

M4x10 Screw

Qty. 4

NOTE: Preassembled

with door handle.

Plain Washer

Qty. 16

Spring Washer

Qty. 16

M6x25 Screw

Qty. 2

NOTE: Preassembled

with lid handle.

AA

DD

EE

GG

HH

BB

CC

M6x16 Screw

Qty. 10

FF

8

ASSEMBLY INSTRUCTIONS

3. Turn over bottom shelf (A) and attach tank shelf

(Z)usingeightM6x12screws(AA).

2. Attach two casters (C) to the front of the

bottom shelf (A) and secure using four plain

washers (BB), four spring washers (CC), and

fourM6x12screws(AA)foreachcaster(C).

1

2

AA

Z

A

3

1

2

CC

C

AA

BB

A

2

Hardware Used

M6x12Screw

Plain washer

Spring washer

x8

AA

BB

CC

M6x12 Screw

Qty. 40

M4x10 Screw

Qty. 12

M6x20 Screw

Qty. 4

M4x10 Screw

Qty. 4

NOTE:

Preassembled

with door handle.

Plain Washer

Qty. 16

Spring Washer

Qty. 16

M6x25 Screw

Qty. 2

NOTE:

Preassembled

with lid handle.

AA

BB CC

FF

EE

GG

HH

M6x16 Screw

Qty. 10

DD

M6x12 Screw

Qty. 40

M4x10 Screw

Qty. 12

M6x20 Screw

Qty. 4

M4x10 Screw

Qty. 4

NOTE: Preassembled

with door handle.

Plain Washer

Qty. 16

Spring Washer

Qty. 16

M6x25 Screw

Qty. 2

NOTE: Preassembled

with lid handle.

AA

DD

EE

GG

HH

BB

CC

M6x16 Screw

Qty. 10

FF

M6x12 Screw

Qty. 40

M4x10 Screw

Qty. 12

M6x20 Screw

Qty. 4

M4x10 Screw

Qty. 4

NOTE:

Preassembled

with door handle.

Plain Washer

Qty. 16

Spring Washer

Qty. 16

M6x25 Screw

Qty. 2

NOTE:

Preassembled

with lid handle.

AA

BB CC

FF

EE

GG

HH

M6x16 Screw

Qty. 10

DD

M6x12 Screw

Qty. 40

M4x10 Screw

Qty. 12

M6x20 Screw

Qty. 4

M4x10 Screw

Qty. 4

NOTE:

Preassembled

with door handle.

Plain Washer

Qty. 16

Spring Washer

Qty. 16

M6x25 Screw

Qty. 2

NOTE:

Preassembled

with lid handle.

AA

BB CC

FF

EE

GG

HH

M6x16 Screw

Qty. 10

DD

4.Securecylinderexclusion(A1)tobottomshelf

(A)usingthreeM6x12screws(AA).

1

2

AA

A1

A

4

Hardware Used

M6x12Screw

x3

AA

M6x12 Screw

Qty. 40

M4x10 Screw

Qty. 12

M6x20 Screw

Qty. 4

M4x10 Screw

Qty. 4

NOTE: Preassembled

with door handle.

Plain Washer

Qty. 16

Spring Washer

Qty. 16

M6x25 Screw

Qty. 2

NOTE: Preassembled

with lid handle.

AA

DD

EE

GG

HH

BB

CC

M6x16 Screw

Qty. 10

FF

9

ASSEMBLY INSTRUCTIONS

6. Attach the cart left and right side panels (D & E)

by placing the panel keyholes over the screw

heads (AA) on the bottom shelf (A). Slide the

cart side panels (D & E) so that the screw head

is over the smaller part of the keyhole. Thread

the screws (AA) down snug but DO NOT tighten

as some slack will be necessary in following

assembly steps.

5. PartiallyinsertfourM6x12screws(AA)intothe

bottom shelf (A).

1

2

D

E

AA

6

A

AA

A

5

Hardware Used

M6x12Screw

x4

AA

M6x12 Screw

Qty. 40

M4x10 Screw

Qty. 12

M6x20 Screw

Qty. 4

M4x10 Screw

Qty. 4

NOTE:

Preassembled

with door handle.

Plain Washer

Qty. 16

Spring Washer

Qty. 16

M6x25 Screw

Qty. 2

NOTE:

Preassembled

with lid handle.

AA

BB CC

FF

EE

GG

HH

M6x16 Screw

Qty. 10

DD

Hardware Used

M6x12Screw

x2

AA

M6x12 Screw

Qty. 40

M4x10 Screw

Qty. 12

M6x20 Screw

Qty. 4

M4x10 Screw

Qty. 4

NOTE: Preassembled

with door handle.

Plain Washer

Qty. 16

Spring Washer

Qty. 16

M6x25 Screw

Qty. 2

NOTE: Preassembled

with lid handle.

AA

DD

EE

GG

HH

BB

CC

M6x16 Screw

Qty. 10

FF

1

2

AA

D

E

7

7. PartiallyinserttwoM6x12screws(AA)intothe

cart left and right side panels (D & E).

10

ASSEMBLY INSTRUCTIONS

Hardware Used

M6x12Screw

x3

x4

AA

2

1

3

AA

G

E

D

9

2

1

3

F

AA

A

D

E

8

8. Attach the cart rear panel (F) by sliding the

keyholes in the cart rear panel (F) over the

inserted screws. Slide the cart rear panel (F) down

to meet bottom shelf (A). Secure the cart rear

panel (F) to the bottom shelf (A) with three screws

(AA). Tighten all screws, including the two screws

in cart side panels (D & E).

9. PartiallyinsertfourM6x12screws(AA)intothe

cart side panels (D & E). Attach the upper door

brace (G) by sliding the cut-outs in the upper door

brace (G) over the four screws (AA) and tightening

all four screws (AA).

1

2

H

J

K

GG

10

10.RemovepreassembledM4x10screws(GG)

from the door handles (J). Insert two door handle

sleeves (K) into the holes located on the back

oftheleftdoorassembly(H).InserttwoM4x10

screws (GG) into the door handle sleeves (K)

and into the threaded holes in the door handle

(J). Tighten the screws. Repeat with right door

assembly (I).

Hardware Used

M4x10Screw

x4

GG

M6x12 Screw

Qty. 40

M4x10 Screw

Qty. 12

M6x20 Screw

Qty. 4

M4x10 Screw

Qty. 4

NOTE: Preassembled

with door handle.

Plain Washer

Qty. 16

Spring Washer

Qty. 16

M6x25 Screw

Qty. 2

NOTE: Preassembled

with lid handle.

AA

DD

EE

GG

HH

BB

CC

M6x16 Screw

Qty. 10

FF

M6x12 Screw

Qty. 40

M4x10 Screw

Qty. 12

M6x20 Screw

Qty. 4

M4x10 Screw

Qty. 4

NOTE: Preassembled

with door handle.

Plain Washer

Qty. 16

Spring Washer

Qty. 16

M6x25 Screw

Qty. 2

NOTE: Preassembled

with lid handle.

AA

DD

EE

GG

HH

BB

CC

M6x16 Screw

Qty. 10

FF

M6x12 Screw

Qty. 40

M4x10 Screw

Qty. 12

M6x20 Screw

Qty. 4

M4x10 Screw

Qty. 4

NOTE: Preassembled

with door handle.

Plain Washer

Qty. 16

Spring Washer

Qty. 16

M6x25 Screw

Qty. 2

NOTE: Preassembled

with lid handle.

AA

DD

EE

GG

HH

BB

CC

M6x16 Screw

Qty. 10

FF

11

ASSEMBLY INSTRUCTIONS

1

2

U

V

HH

O

12

1

2

DD

H

D

11

11. Attach the left door assembly (H) to the cart

body by aligning the holes in the hinge of the

left door assembly (H) with the holes in the cart

leftsidepanel(D).SecureusingfourM4x10

screws (DD). Tighten all screws. Repeat with

right door assembly (I).

12. Remove preassembled screws (HH) from the lid

handle (U). Attach the lid handle (U) by inserting

twoM6x25screws(HH)frominsidethelidofthe

grillbody(O),throughthelidhandlebezels(V),

into the lid handle (U) and tightening securely.

Hardware Used

M4x10Screw

M6x25Screw

x8

x2

DD

HH

M6x12 Screw

Qty. 40

M4x10 Screw

Qty. 12

M6x20 Screw

Qty. 4

M4x10 Screw

Qty. 4

NOTE: Preassembled

with door handle.

Plain Washer

Qty. 16

Spring Washer

Qty. 16

M6x25 Screw

Qty. 2

NOTE: Preassembled

with lid handle.

AA

DD

EE

GG

HH

BB

CC

M6x16 Screw

Qty. 10

FF

M6x12 Screw

Qty. 40

M4x10 Screw

Qty. 12

M6x20 Screw

Qty. 4

M4x10 Screw

Qty. 4

NOTE: Preassembled

with door handle.

Plain Washer

Qty. 16

Spring Washer

Qty. 16

M6x25 Screw

Qty. 2

NOTE: Preassembled

with lid handle.

AA

DD

EE

GG

HH

BB

CC

M6x16 Screw

Qty. 10

FF

O

M

N

13

13. Slip main burner control knobs (M) and side/

rear burner control knob (N) onto the valve

stems located on the front control panel of the

grill body (O).

12

ASSEMBLY INSTRUCTIONS

Hardware Used

M6x20Screw

x4

EE

M6x12 Screw

Qty. 40

M4x10 Screw

Qty. 12

M6x20 Screw

Qty. 4

M4x10 Screw

Qty. 4

NOTE: Preassembled

with door handle.

Plain Washer

Qty. 16

Spring Washer

Qty. 16

M6x25 Screw

Qty. 2

NOTE: Preassembled

with lid handle.

AA

DD

EE

GG

HH

BB

CC

M6x16 Screw

Qty. 10

FF

14. Lock the back two casters (B) to ensure the cart

doesn’t move. Using two people, carefully place

the grill body (O) over the mounting tabs on

the cart side panels (D & E) and onto the cart.

Adjust the grill body (O) so that the holes in the

grill body (O) are aligned with the holes in the

tabs of the cart side panels (D & E).

NOTE: Make sure the LP gas hose regulator is

inside the cart

15.Securethegrillbody(O)usingtwoM6x20

screws (EE) on each side.

1

2

DD

E

16

16. Secure the LP gas holder to cart right side

panel(E)usingtwoM4x10screws(DD).

Hardware Used

M4x10Screw

x2

DD

M6x12 Screw

Qty. 40

M4x10 Screw

Qty. 12

M6x20 Screw

Qty. 4

M4x10 Screw

Qty. 4

NOTE: Preassembled

with door handle.

Plain Washer

Qty. 16

Spring Washer

Qty. 16

M6x25 Screw

Qty. 2

NOTE: Preassembled

with lid handle.

AA

DD

EE

GG

HH

BB

CC

M6x16 Screw

Qty. 10

FF

1

2

EE

O

15

O

D

E

14

13

ASSEMBLY INSTRUCTIONS

1

2

P

FF

O

18

1

2

FF

O

17

17.PartiallyinserttwoM6x16screws(FF)intothe

left side of grill body (O). DO NOT fully tighten

screws(leaveapproximately5mm).

18. Align the key holes in the left shelf assembly (P)

with the two screws (FF) just installed in the grill

body(O)andtightenscrews.InsertthreeM6x16

screws (FF) in the remaining holes in the supports

and tighten.

Hardware Used

M6x16Screw

x2

x3

FF

M6x12 Screw

Qty. 40

M4x10 Screw

Qty. 12

M6x20 Screw

Qty. 4

M4x10 Screw

Qty. 4

NOTE: Preassembled

with door handle.

Plain Washer

Qty. 16

Spring Washer

Qty. 16

M6x25 Screw

Qty. 2

NOTE: Preassembled

with lid handle.

AA

DD

EE

GG

HH

BB

CC

M6x16 Screw

Qty. 10

FF

M6x12 Screw

Qty. 40

M4x10 Screw

Qty. 12

M6x20 Screw

Qty. 4

M4x10 Screw

Qty. 4

NOTE: Preassembled

with door handle.

Plain Washer

Qty. 16

Spring Washer

Qty. 16

M6x25 Screw

Qty. 2

NOTE: Preassembled

with lid handle.

AA

DD

EE

GG

HH

BB

CC

M6x16 Screw

Qty. 10

FF

Hardware Used

M4x10Screw

x2

DD

M6x12 Screw

Qty. 40

M4x10 Screw

Qty. 12

M6x20 Screw

Qty. 4

M4x10 Screw

Qty. 4

NOTE: Preassembled

with door handle.

Plain Washer

Qty. 16

Spring Washer

Qty. 16

M6x25 Screw

Qty. 2

NOTE: Preassembled

with lid handle.

AA

DD

EE

GG

HH

BB

CC

M6x16 Screw

Qty. 10

FF

2

1

3

DD

19

19. Align the side burner tubing with the side burner

oriceandinsertintothesideburnerorice.

UsetwoM4x10screws(DD)tosecuretheside

burneroriceandsideburneroricesupportto

the side burner support.

14

ASSEMBLY INSTRUCTIONS

Q

21

20

20. Attach the ignition wiring to the electrode.

21. Align the key holes on the burner tray with the

side burner cooking grate (Q) and set in place.

1

2

FF

O

22

22.PartiallyinserttwoM6x16screws(FF)intothe

right side of grill body (O). DO NOT fully tighten

screws(leaveapproximately5mm).

Hardware Used

M6x16Screw

x2

FF

M6x12 Screw

Qty. 40

M4x10 Screw

Qty. 12

M6x20 Screw

Qty. 4

M4x10 Screw

Qty. 4

NOTE: Preassembled

with door handle.

Plain Washer

Qty. 16

Spring Washer

Qty. 16

M6x25 Screw

Qty. 2

NOTE: Preassembled

with lid handle.

AA

DD

EE

GG

HH

BB

CC

M6x16 Screw

Qty. 10

FF

15

ASSEMBLY INSTRUCTIONS

1

2

FF

O

R

23

Burner

Valve

Orifice

WARNING

23. Align the key holes in the right shelf assembly

(R) with the two screws (FF) just installed in

the grill body (O) and tighten screws. Insert

three screws (FF) in the remaining holes in the

supports and tighten.

WARNING: IT IS VERY IMPORTANT TO

CHECK AND ENSURE THAT EACH AND

EVERY BURNER IS FULLY ENGAGED

WITH THE ADJACENT VALVE ORIFICE

BEFORE COMPLETING STEP 24.

FAILURE TO DO SO MAY RESULT

IN FIRE OR EXPLOSION, POSSIBLY

CAUSING SERIOUS INJURY OR DEATH.

REFER TO MAINTENANCE SECTION

INSTRUCTIONS TO PROPERLY CHECK

THE ENGAGEMENT.

Hardware Used

M6x16Screw

x3

FF

M6x12 Screw

Qty. 40

M4x10 Screw

Qty. 12

M6x20 Screw

Qty. 4

M4x10 Screw

Qty. 4

NOTE: Preassembled

with door handle.

Plain Washer

Qty. 16

Spring Washer

Qty. 16

M6x25 Screw

Qty. 2

NOTE: Preassembled

with lid handle.

AA

DD

EE

GG

HH

BB

CC

M6x16 Screw

Qty. 10

FF

1

2

X

24

24. Open the lid of the grill body (O) and place

theveheattents(X)onthebracketsdirectly

above the burners.

16

ASSEMBLY INSTRUCTIONS

W

26

Y

25

25. Place the three cooking grates (Y) on the grill

body braces and grill rear panel.

26. Insert the warming rack (W) into the two holes

located on the back edge of the grill body (O).

1

2

1

S

T

O

27

27. Insert the grease pan (S) into position by sliding it

in the grill body (O) from the rear along the rails.

Insert the grease cup (T) into position by sliding

it onto the rails located on the bottom side of the

grease pan (S).

17

ASSEMBLY INSTRUCTIONS

3

2

4

1

L

28

1

2

Z

29

28. Remove the igniter cap by turning it

counterclockwise. Insert the AA battery (L) into

the igniter body with positive (+) end facing out.

Replace the igniter cap.

29. Open the cart doors and slide the tank shelf (Z)

out of the cart, and insert the LP gas cylinder

(sold separately) into the nesting hole located in

the tank shelf (Z). Tighten the tank screw until the

cylinder is secure inside the nesting hole of the

tank shelf (Z).

1

3

2

Z

30

30. Push the tank shelf (Z) back into the cart and

secure it by twisting the locking tab. Hand-tighten

the hose/regulator coupling to the threaded valve

of the LP gas cylinder.

18

OPERATING INSTRUCTIONS

Checking for Leaks

Afterallconnectionsaremade,checkallconnectionsandttingsontheLPgastankvalve,gashose

and regulator for leaks with a water and soap solution.

Topreventreorexplosionwhiletestingforaleak:

• Always perform leak test prior to lighting the grill.

• Do not smoke while testing for a leak.

• Always perform leak tests outdoors in a well-ventilated area.

•Donotuseanysourceofamewhiletestingforleaks.

• Do not use the grill until any and all leaks are corrected.

• If you are unable to correct a leak, disconnect the propane supply and call a gas appliance service

dealer.

Perform Leak Test

• Prepare leak test solution by combining 1 part liquid dish soap with 3 parts water. Total solution

requiredisapproximately2-3ounces(70-90ml).Putleaktestsolutioninaspraybottle.

• Ensure all control knobs are in the O OFF position.

• Connect the gas hose to the gas supply.

• Open the LP gas tank valve.

•Sprayleaktestsolutiononallgascarryingconnectionsandttings.Presenceofbubblesatareasof

applied test solution indicates a gas leak. If leaks are detected or you smell or hear gas, shut off the

gas supply valve immediately and repair or replace the defective part. Do not use the grill until all

leaks are corrected.

Use only the regulator and hose assembly provided. If a replacement is necessary, please call our

customer service center. DO NOT use replacement parts that are not intended for this grill.

CAUTION

ALL INSTRUCTIONS AND SAFEGUARDS ON THIS PAGE MUST BE FOLLOWED TO

PREVENT FIRE, DAMAGE AND/OR INJURY.

WARNING

19

OPERATING INSTRUCTIONS

Connecting Gas Cylinder

The propane gas supply cylinder to be used must be constructed and marked in accordance with the

SpecicationsforLPGasCylindersoftheU.S.DepartmentofTransportation(D.O.T.)ortheNational

Standard of Canada, CAN/CSA-B339, Cylinders, Spheres and Tubes for Transportation of Dangerous

Goods;andCommission,asapplicable;andprovidedwithalistedoverllingpreventiondevice.

Use only 20-lb. cylinders (height: 18.11 in. (46 cm), tank diameter: 9.84 in. (25 cm), foot diameter:

8.03 in. (20.4 cm) equipped with a cylinder connection device compatible with the connection for

outdoor cooking appliances.

The cylinder must include a collar to protect the cylinder valve. The gas cylinder should not be

dropped or handled roughly!

If the appliance is not in use, the gas cylinder must be disconnected. Storage of an appliance indoors

is permissible ONLY if the cylinder is disconnected and removed from the appliance. Cylinders must be

stored outdoors out of the reach of children and must not be stored in a building, garage or any other

enclosedarea.Yourcylindermustneverbestoredwheretemperaturescanreachover125°F(51.67˚C).

Place dust cap on cylinder valve outlet whenever the cylinder is not in use. Only install the type of

dust cap on the cylinder valve outlet that is provided with the cylinder valve. Other types of caps or

plugs may result in leakage of propane.

Before connection, be sure that there is no debris caught in the outlet of the gas cylinder, outlet of

the regulator valve or in the outlet of the burner and burner ports. Connect regulator valve and hand-

tightenrmly.Keepthepropanecylindervalveclosedanddisconnectthepropanecylinderfromthe

regulator valve when the grill is not in use.

DO NOTobstructtheowofcombustionairandventilationairtothegrill.Thepropanecylindermust

bearrangedforvaporwithdrawalandequippedwithalistedoverllingpreventiondevice.Pleaseuse

the proper cylinder orientation to provide vapor withdrawal. NOTE: The cylinder must be fully upright

for the cylinder to have vapor withdrawal only.

Correct Wrong Wrong

Vapor

Liquid

Vapor

Liquid

Vapor

Liquid

a. DO NOT store a spare LP-gas cylinder under or near this appliance.

b.NEVERllthecylinderbeyond80percentfull.

c.Iftheinformationin(a)and(b)isnotfollowedexactly,arecausingdeathorseriousinjurymay

occur.

CAUTION

20

OPERATING INSTRUCTIONS

NOTE: Other cylinders may be acceptable for use with this appliance provided they are compatible

with the appliance nesting hole and retention means. Refer to Step 29 of the Assembly Instructions

for correct cylinder to cylinder holder connection.

Connecting the LP Tank

1. The knob on the LP tank must be closed. Make sure that the knob is turned clockwise to a full stop.

The cylinder supply system must be arranged for vapor withdrawal.

2. Check that the control knob on the control unit is turned off.

3. Remove the protective cap from the LP tank valve and coupling nut.

4. Hold the regulator in one hand and insert the nipple into the valve outlet.

Be sure the nipple is centered in the valve outlet. The coupling nut

connects to the large outside threads on the valve outlet. Use care – do

not cross thread the connection.

5. Hand-tighten the coupling nut clockwise until it comes to a full stop.

Firmly tighten by hand only. Do not use tools.

To Disconnect: Fully close the tank valve by turning clockwise. Turn the

coupling nut counterclockwise until the regulator assembly detaches.

ALL INSTRUCTIONS AND SAFEGUARDS ON THIS PAGE MUST BE FOLLOWED TO PREVENT FIRE,

DAMAGE, AND/OR INJURY.

WARNING

In the connection process, make sure:

•theregulatorinletconnectormateswiththecylindervalveoutletproperly,safelyandrmly,and;

•theLPgashosedoesnotcomeincontactorremainincontactwiththerebox.

WARNING

La page charge ...

Dyna-Glo DGA550SSP-D Manuel utilisateur

Dyna-Glo DGA550SSP-D Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents