Emac FLA0112 Manuel utilisateur

Taper
Manuel utilisateur
R03.001_10/05/2011
TECHNICAL FILE
Novocanto® Arrow
Novocanto® Arrow belongs to the wide range of edge protectors
of Emac®. This prole has an arrow shape, which facilitates the
alignment of the tiles during the installation. Once it has been
installed, the visible side keeps hidden the edges of the tiles,
protecting them from possible damage. Novocanto® Arrow is
available in two heights in anodized nish.
General Features
Material: Anodized aluminum
Length: 8ft2in / 2,5 m.l.
Dimensions:
h: 3/8”, 1/2”
10, 12 mm.
Packaging: 20 u./box
Finishes:
Applications
Novocanto® Flecha is a prole intended to protect and decorate corners in ceramic walls. It also can
be installed as a nish off at medium height.
Materials
Aluminum
Novocanto® Flecha is a prole made by extrusion of aluminum. The bright gold and bright silver
nishes have been anodized, improving mainly by this process their corrosion resistance, mechanical
resistance and appearance. The anodized applied has the quality seal Qualanod, which guarantees the
quality of the process and the resulting proles. This seal regulates several tests: appearance and color,
thickness measurements, sealing and impregnation control, abrasion resistance, lightfastness, acetic
saline chamber and nitric acid immersion.
Alloy: 6063 (AA y ASTM)
L-3441 (UNE 38-301-89)
Fire resistance: M0 (UNE 23-727-90)
Abrasion resistance: Very good
Lightfastness: Excellent
Appearance and color: EN 12373-1
Technical Features
Page 1 of 2
Aluminum is a material with excellent chemical, physical and mechanical properties. It is lightweight,
tough, ductile, malleable and highly durable.
TECHNICAL FILE
R03.001_10/05/2011
Emac Complementos S.L. (Spain) info@emac.es // Emac America L.L.C. (FL,USA) [email protected] // Emac Italia S.R.L. (Italy) [email protected]
www.emac.es
The data provided are for information only and have been obtained by our supplier or Emac®.
Does not constitute legal guarantee in terms of properties and / or functionality of the application of material
You can nd out more information about the technical features of Emac®’s products by downloading
its Technical File in www.emac.es.
If you have any query, please contact our Technical Department in tecnico@emac.es.
Technical information
Installation
1
2 3
4 5
Cleaning and maintenance
Page 2 of 2
Novocanto® Arrow
To see the video, capture this
image with your mobile phone
(QR code reader software is
necessary) or click on it.
1. Spread a big amount of thin set mortar on the walls.
2. Place the prole on the corner between de two walls and press to achieve a perfect adhesion.
3. Place the rst tile on the right of the prole, aligning it to its geometry. Then continue tiling upwards.
4. Place tiles on the other wall, aligning them to the prole and pressing to get a perfect adhesion.
5. Finally, clean the remaining material, remove the protective lm if necessary and let dry.
The cleaning must be done periodically with a soft cloth. If you use a neutral liquid cleaner, you must
rinse the prole with cold water and dry to remove excess moisture. If dirtiness persists, clean the
prole with a solution with clean water and detergent or neutral soap 5%, brushing with a cloth that
has no particles that could scracht the nish. Ensure the lacquered surface is totally cold (maximum
20ºC) before the cleaning.
Steel wool, abrasive cleaners, souring products as well as strong acids (hydrochloric and
perchloric),strong bases (caustic soda or ammonia) or carbonated solutions are not recommended.
Citric acid is neither recommended because disolves the protective layer of the surface of aluminium.
Waxes, petrolatum, lanolin or similar substances are not appropriate. Solvents containing haloalkanes
(hydrouoroether and chlorinated solvents) and curing accelerators containing chlorides should not be
used (use special accelerators free of chlorides).
  • Page 1 1
  • Page 2 2

Emac FLA0112 Manuel utilisateur

Taper
Manuel utilisateur

dans d''autres langues