Progress PAI8105I Manuel utilisateur

PAI8105I

User Manual

Notice d'utilisation

Benutzerinformation

Hob

Table de cuisson

Kochfeld

CONTENTS

Safety information 2

Safety instructions 3

Product description 6

Daily use 8

Hints and tips 10

Care and cleaning 12

Troubleshooting 12

Installation 14

Technical data 17

Energy efficiency 18

Subject to change without notice.

SAFETY INFORMATION

Before the installation and use of the appliance, carefully

read the supplied instructions. The manufacturer is not

responsible for any injuries or damages that are the result of

incorrect installation or usage. Always keep the instructions

in a safe and accessible location for future reference.

Children and vulnerable people safety

• This appliance can be used by children aged from 8 years

and above and persons with reduced physical, sensory or

mental capabilities or lack of experience and knowledge if

they have been given supervision or instruction concerning

the use of the appliance in a safe way and understand the

hazards involved.

• Do not let children play with the appliance.

• Keep all packaging away from children and dispose of it

appropriately.

• Keep children and pets away from the appliance when it

operates or when it cools down. Accessible parts are hot.

• If the appliance has a child safety device, this should be

activated.

• Children shall not carry out cleaning and user maintenance

of the appliance without supervision.

• Children aged 3 years and under must be kept away from

this appliance when it is in operation at all times.

General Safety

• WARNING: The appliance and its accessible parts

become hot during use. Care should be taken to avoid

2 Progress

touching heating elements. Children less than 8 years of

age shall be kept away unless continuously supervised.

• Do not operate the appliance by means of an external

timer or separate remote-control system.

• WARNING: Unattended cooking on a hob with fat or oil

can be dangerous and may result in fire.

• NEVER try to extinguish a fire with water, but switch off the

appliance and then cover flame e.g. with a lid or a fire

blanket.

• CAUTION: The cooking process has to be supervised. A

short term cooking process has to be supervised

continuously.

• WARNING: Danger of fire: Do not store items on the

cooking surfaces.

• Metallic objects such as knives, forks, spoons and lids

should not be placed on the hob surface since they can get

hot.

• Do not use a steam cleaner to clean the appliance.

• After use, switch off the hob element by its control and do

not rely on the pan detector.

• If the glass ceramic surface / glass surface is cracked,

switch off the appliance to avoid the possibility of electric

shock.

• If the supply cord is damaged, it must be replaced by the

manufacturer, an authorized Service or similarly qualified

persons in order to avoid a hazard.

• WARNING: Use only hob guards designed by the

manufacturer of the cooking appliance or indicated by the

manufacturer of the appliance in the instructions for use as

suitable or hob guards incorporated in the appliance. The

use of inappropriate guards can cause accidents.

SAFETY INSTRUCTIONS

Installation

WARNING! Only a qualified

person must install this

appliance.

WARNING! Risk of injury or

damage to the appliance.

• Remove all the packaging.

Progress 3

• Do not install or use a damaged

appliance.

• Follow the installation instruction

supplied with the appliance.

• Keep the minimum distance from the

other appliances and units.

• Always take care when moving the

appliance as it is heavy. Always use

safety gloves and enclosed footwear.

• Seal the cut surfaces with a sealant to

prevent moisture to cause swelling.

• Protect the bottom of the appliance

from steam and moisture.

• Do not install the appliance adjacent to

a door or under a window. This

prevents hot cookware to fall from the

appliance when the door or the window

is opened.

• If the appliance is installed above

drawers make sure that the space,

between the bottom of the appliance

and the upper drawer, is sufficient for

air circulation.

• The bottom of the appliance can get

hot. Make sure to install a separation

panel made from plywood, kitchen

carcass material or other non-

flammable materials under the

appliance to prevent access to the

bottom.

• Make sure that the ventilation space of

2 mm, between the worktop and the

front of the below unit, is free. The

warranty does not cover damages

caused by the lack of an adequate

ventilation space.

Electrical Connection

WARNING! Risk of fire and

electrical shock.

• All electrical connections should be

made by a qualified electrician.

• The appliance must be earthed.

• Before carrying out any operation make

sure that the appliance is disconnected

from the power supply.

• Make sure that the parameters on the

rating plate are compatible with the

electrical ratings of the mains power

supply.

• Make sure the appliance is installed

correctly. Loose and incorrect electricity

mains cable or plug (if applicable) can

make the terminal become too hot.

• Use the correct electricity mains cable.

• Do not let the electricity mains cable

tangle.

• Make sure that a shock protection is

installed.

• Use the strain relief clamp on the cable.

• Make sure the mains cable or plug (if

applicable) does not touch the hot

appliance or hot cookware, when you

connect the appliance to the near

sockets.

• Do not use multi-plug adapters and

extension cables.

• Make sure not to cause damage to the

mains plug (if applicable) or to the

mains cable. Contact our Authorised

Service Centre or an electrician to

change a damaged mains cable.

• The shock protection of live and

insulated parts must be fastened in

such a way that it cannot be removed

without tools.

• Connect the mains plug to the mains

socket only at the end of the

installation. Make sure that there is

access to the mains plug after the

installation.

• If the mains socket is loose, do not

connect the mains plug.

• Do not pull the mains cable to

disconnect the appliance. Always pull

the mains plug.

• Use only correct isolation devices: line

protecting cut-outs, fuses (screw type

fuses removed from the holder), earth

leakage trips and contactors.

• The electrical installation must have an

isolation device which lets you

disconnect the appliance from the

mains at all poles. The isolation device

must have a contact opening width of

minimum 3 mm.

Use

WARNING! Risk of injury,

burns and electrical shock.

4 Progress

• Remove all the packaging, labelling

and protective film (if applicable) before

first use.

• Use this appliance in a household

environment.

• Do not change the specification of this

appliance.

• Make sure that the ventilation openings

are not blocked.

• Do not let the appliance stay

unattended during operation.

• Set the cooking zone to “off” after each

use.

• Do not rely on the pan detector.

• Do not put cutlery or saucepan lids on

the cooking zones. They can become

hot.

• Do not operate the appliance with wet

hands or when it has contact with

water.

• Do not use the appliance as a work

surface or as a storage surface.

• If the surface of the appliance is

cracked, disconnect immediately the

appliance from the power supply. This

to prevent an electrical shock.

• Users with a pacemaker must keep a

distance of minimum 30 cm from the

induction cooking zones when the

appliance is in operation.

• When you place food into hot oil, it may

splash.

WARNING! Risk of fire and

explosion

• Fats and oil when heated can release

flammable vapours. Keep flames or

heated objects away from fats and oils

when you cook with them.

• The vapours that very hot oil releases

can cause spontaneous combustion.

• Used oil, that can contain food

remnants, can cause fire at a lower

temperature than oil used for the first

time.

• Do not put flammable products or items

that are wet with flammable products

in, near or on the appliance.

WARNING! Risk of damage to

the appliance.

• Do not keep hot cookware on the

control panel.

• Do not put a hot pan cover on the glass

surface of the hob.

• Do not let cookware to boil dry.

• Be careful not to let objects or

cookware fall on the appliance. The

surface can be damaged.

• Do not activate the cooking zones with

empty cookware or without cookware.

• Do not put aluminium foil on the

appliance.

• Cookware made of cast iron, aluminium

or with a damaged bottom can cause

scratches on the glass / glass ceramic.

Always lift these objects up when you

have to move them on the cooking

surface.

• This appliance is for cooking purposes

only. It must not be used for other

purposes, for example room heating.

Care and cleaning

• Clean regularly the appliance to

prevent the deterioration of the surface

material.

• Deactivate the appliance and let it cool

down before you clean it.

• Disconnect the appliance from the

electrical supply before maintenance.

• Do not use water spray and steam to

clean the appliance.

• Clean the appliance with a moist soft

cloth. Only use neutral detergents. Do

not use any abrasive products,

abrasive cleaning pads, solvents or

metal objects.

Disposal

WARNING! Risk of injury or

suffocation.

• Contact your municipal authority for

information on how to discard the

appliance correctly.

• Disconnect the appliance from the

mains supply.

• Cut off the mains electrical cable close

to the appliance and dispose of it.

Progress 5

Service

• To repair the appliance contact an

Authorised Service Centre.

• Use original spare parts only.

PRODUCT DESCRIPTION

Cooking surface layout

1 12

1 1

1

Induction cooking zone

2

Control panel

Control panel layout

64 71 2 3 5

9 811 10

Use the sensor fields to operate the appliance. The displays, indicators and sounds tell

which functions operate.

Sen‐

sor

field

Function Comment

1

ON / OFF To activate and deactivate the hob.

2

Lock / The Child Safety

Device

To lock / unlock the control panel.

3

STOP+GO To activate and deactivate the function.

4

- Heat setting display To show the heat setting.

6 Progress

Sen‐

sor

field

Function Comment

5

- Timer indicators of cooking

zones

To show for which zone you set the time.

6

- Timer display To show the time in minutes.

7

Bridge To activate and deactivate the function.

8

- To select the cooking zone.

9

/

- To increase or decrease the time.

10

Power function To activate and deactivate the function.

11

- Control bar To set a heat setting.

Heat setting displays

Display Description

The cooking zone is deactivated.

-

The cooking zone operates.

STOP+GO function operates.

Automatic Heat Up function operates.

Power function operates.

+ digit

There is a malfunction.

A cooking zone is still hot (residual heat).

Lock / The Child Safety Device function operates.

Incorrect or too small cookware or no cookware on the cooking zone.

Automatic Switch Off function operates.

Residual heat indicator

WARNING! There is a risk

of burns from residual heat.

The induction cooking zones make the

heat necessary for cooking process

directly in the bottom of the cookware. The

glass ceramic is heated by the heat of the

cookware.

Progress 7

DAILY USE

WARNING! Refer to Safety

chapters.

Activating and deactivating

Touch for 1 second to activate or

deactivate the hob.

Automatic Switch Off

The function deactivates the hob

automatically if:

• all cooking zones are deactivated,

• you do not set the heat setting after you

activate the hob,

• you spill something or put something

on the control panel for more than 10

seconds (a pan, a cloth, etc.). An

acoustic signal sounds and the hob

deactivates. Remove the object or

clean the control panel.

• the hob gets too hot (e.g. when a

saucepan boils dry). Let the cooking

zone cool down before you use the hob

again.

• you use incorrect cookware. The

symbol comes on and the cooking

zone deactivates automatically after 2

minutes.

• you do not deactivate a cooking zone

or change the heat setting. After some

time comes on and the hob

deactivates.

The relation between the heat setting

and the time after which the hob

deactivates:

Heat setting The hob deacti‐

vates after

, 1 - 2

6 hours

3 - 4 5 hours

5 4 hours

6 - 9 1.5 hour

The heat setting

To set or change the heat setting:

Touch the control bar at the correct heat

setting or move your finger along the

control bar until you reach the correct heat

setting.

Bridge function

The function operates when the

pot covers the centres of the

two zones.

This function connects two right side

cooking zones and they operate as one.

First set the heat setting for one of the

right side cooking zones.

To activate the function: touch

. To

set or change the heat setting touch one

of the control sensors.

To deactivate the function: touch

.

The cooking zones operate independently.

Automatic Heat Up

Activate this function to get a desired heat

setting in a shorter time. When it is on, the

zone operates on the highest setting in the

beginning and then continues to cook at

the desired heating setting.

To activate the function the

cooking zone must be cold.

To activate the function for a cooking

zone: touch ( comes on).

Immediately touch a desired heat setting.

After 3 seconds comes on.

To deactivate the function: change the

heat setting.

8 Progress

Power function

This function makes more power available

to the induction cooking zones. The

function can be activated for the induction

cooking zone only for a limited period of

time. After this time the induction cooking

zone automatically sets back to the

highest heat setting.

Refer to “Technical information”

chapter.

To activate the function for a cooking

zone: touch . comes on.

To deactivate the function: change the

heat setting.

Timer

Count Down Timer

You can use this function to set how long

the cooking zone should operate for a

single cooking session.

First set the heat setting for the cooking

zone then set the function.

To set the cooking zone: touch again

and again until the indicator of a

necessary cooking zone comes on.

To activate the function or change the

time: touch or of the timer to set the

time (00 - 99 minutes). When the indicator

of the cooking zone starts to flash slowly

the time counts down.

To see the remaining time: set the

cooking zone with

. The indicator of the

cooking zone starts to flash quickly. The

display shows the remaining time.

To deactivate the function: set the

cooking zone with and touch . The

remaining time counts back to 00. The

indicator of the cooking zone goes out.

When the time comes to an

end, the sound operates and

00 flashes. The cooking zone

deactivates.

To stop the sound: touch .

Minute Minder

You can use this function as a Minute

Minder when the hob is activated and the

cooking zones do not operate. The heat

setting display shows .

To activate the function: touch .

Touch or of the timer to set the time.

When the time comes to an end, the

sound operates and 00 flashes.

To stop the sound: touch .

The function has no effect on

the operation of the cooking

zones.

STOP+GO

This function sets all cooking zones that

operate to the lowest heat setting.

When the function operates, you cannot

change the heat setting.

The function does not stop the timer

functions.

To activate the function: touch

.

comes on.

To deactivate the function: touch

.

The previous heat setting comes on.

Lock

You can lock the control panel while

cooking zones operate. It prevents an

accidental change of the heat setting.

Set the heat setting first.

To activate the function: touch

.

comes on for 4 seconds. The Timer stays

on.

To deactivate the function: touch

.

The previous heat setting comes on.

When you deactivate the hob,

you also deactivate this

function.

Progress 9

The Child Safety Device

This function prevents an accidental

operation of the hob.

To activate the function: activate the hob

with . Do not set the heat setting. Touch

for 4 seconds. comes on.

Deactivate the hob with

.

To deactivate the function: activate the

hob with . Do not set the heat setting.

Touch for 4 seconds. comes on.

Deactivate the hob with

.

To override the function for only one

cooking time: activate the hob with .

comes on. Touch for 4 seconds. Set

the heat setting in 10 seconds. You can

operate the hob. When you deactivate the

hob with the function operates again.

Power management function

• Cooking zones are grouped according

to the location and number of the

phases in the hob. See the illustration.

• Each phase has a maximum electricity

loading of 3700 W.

• The function divides the power

between cooking zones connected to

the same phase.

• The function activates when the total

electricity loading of the cooking zones

connected to a single phase exceeds

3700 W.

• The function decreases the power to

the other cooking zones connected to

the same phase.

• The heat setting display of the reduced

zones changes between two levels.

HINTS AND TIPS

WARNING! Refer to Safety

chapters.

Cookware

For induction cooking zones a

strong electro-magnetic field

creates the heat in the

cookware very quickly.

Use the induction cooking

zones with correct cookware.

Cookware material

• correct: cast iron, steel, enamelled

steel, stainless steel, the bottom made

of multi-layer (with correct mark from a

manufacturer).

• not correct: aluminium, copper, brass,

glass, ceramic, porcelain.

Cookware is correct for an induction

hob if:

• some water boils very quickly on a

zone set to the highest heat setting.

• a magnet pulls on to the bottom of the

cookware.

The bottom of the cookware

must be as thick and flat as

possible.

Cookware dimensions

Induction cooking zones adapt to the

dimension of the bottom of the cookware

automatically to some limit.

10 Progress

The cooking zone efficiency is related to

the diameter of the cookware. The

cookware with a smaller diameter than the

minimum receives only a part of the power

generated by the cooking zone.

Refer to “Technical information”

chapter.

The noises during operation

If you can hear:

• crack noise: cookware is made of

different materials (sandwich

construction).

• whistle sound: you use the cooking

zone with high power level and the

cookware is made of different materials

(sandwich construction).

• humming: you use high power level.

• clicking: electric switching occurs.

• hissing, buzzing: the fan operates.

The noises are normal and do not refer

to hob malfunction.

Examples of cooking

applications

The relation between the heat setting and

the cooking zone consumption of power is

not linear. When you increase the heat

setting, it is not proportional to the

increase of the cooking zone consumption

of power. It means that the cooking zone

with the medium heat setting uses less

than a half of its power.

The data in the table is for

guidance only.

Heat setting Use to: Time

(min)

Hints

- 1

Keep cooked food warm. as

nec‐

essary

Put a lid on the cookware.

1 - 2 Hollandaise sauce, melt: but‐

ter, chocolate, gelatine.

5 - 25 Mix from time to time.

1 - 2 Solidify: fluffy omelettes, baked

eggs.

10 -

40

Cook with a lid on.

2 - 3 Simmer rice and milkbased

dishes, heating up ready-

cooked meals.

25 -

50

Add the minimum twice as

much liquid as rice, mix milk

dishes part procedure

through.

3 - 4 Steam vegetables, fish, meat. 20 -

45

Add some tablespoons of liq‐

uid.

4 - 5 Steam potatoes. 20 -

60

Use max. ¼ l water for 750 g

of potatoes.

4 - 5 Cook larger quantities of food,

stews and soups.

60 -

150

Up to 3 l liquid plus ingredi‐

ents.

6 - 7 Gentle fry: escalope, veal cor‐

don bleu, cutlets, rissoles,

sausages, liver, roux, eggs,

pancakes, doughnuts.

as

nec‐

essary

Turn halfway through.

Progress 11

Heat setting Use to: Time

(min)

Hints

7 - 8 Heavy fry, hash browns, loin

steaks, steaks.

5 - 15 Turn halfway through.

9 Boil water, cook pasta, sear meat (goulash, pot roast), deep-fry chips.

Boil large quantities of water. Power function is activated.

CARE AND CLEANING

WARNING! Refer to Safety

chapters.

General information

• Clean the hob after each use.

• Always use cookware with clean

bottom.

• Scratches or dark stains on the surface

have no effect on how the hob

operates.

• Use a special cleaner applicable for the

surface of the hob.

• Use a special scraper for the glass.

Cleaning the hob

• Remove immediately: melted plastic,

plastic foil, sugar and food with sugar. If

not, the dirt can cause damage to the

hob. Take care to avoid burns. Put the

special scraper on the glass surface at

an acute angle and move the blade on

the surface.

• Remove when the hob is sufficiently

cool: limescale rings, water rings, fat

stains, shiny metallic discoloration.

Clean the hob with a moist cloth and

non-abrasive detergent. After cleaning,

wipe the hob dry with a soft cloth.

• Remove shiny metallic

discoloration: use a solution of water

with vinegar and clean the glass

surface with a moist cloth.

TROUBLESHOOTING

WARNING! Refer to Safety

chapters.

What to do if...

Problem Possible cause Remedy

You cannot activate or oper‐

ate the hob.

The hob is not connected to

an electrical supply or it is

connected incorrectly.

Check if the hob is correctly

connected to the electrical

supply. Refer to the connec‐

tion diagram.

12 Progress

Problem Possible cause Remedy

The fuse is blown. Make sure that the fuse is

the cause of the malfunc‐

tion. If the fuse is blown

again and again, contact a

qualified electrician.

Activate the hob again and

set the heat setting in less

than 10 seconds.

You touched 2 or more sen‐

sor fields at the same time.

Touch only one sensor field.

STOP+GO function oper‐

ates.

Refer to "Daily use" chapter.

There is water or fat stains

on the control panel.

Clean the control panel.

An acoustic signal sounds

and the hob deactivates.

An acoustic signal sounds

when the hob is deactivated.

You put something on one

or more sensor fields.

Remove the object from the

sensor fields.

The hob deactivates. You put something on the

sensor field .

Remove the object from the

sensor field.

Residual heat indicator does

not come on.

The zone is not hot be‐

cause it operated only for a

short time.

If the zone operated suffi‐

ciently long to be hot, speak

to an Authorised Service

Centre.

Automatic Heat Up function

does not operate.

The zone is hot. Let the zone become suffi‐

ciently cool.

The highest heat setting is

set.

The highest heat setting has

the same power as the func‐

tion.

The heat setting changes

between two levels.

Power management function

operates.

Refer to "Daily use" chapter.

The sensor fields become

hot.

The cookware is too large or

you put it too near to the

controls.

Put large cookware on the

rear zones if possible.

comes on.

Automatic Switch Off oper‐

ates.

Deactivate the hob and acti‐

vate it again.

comes on.

The Child Safety Device or

the Lock function operates.

Refer to "Daily use" chapter.

Progress 13

Problem Possible cause Remedy

comes on.

There is no cookware on the

zone.

Put cookware on the zone.

The cookware is incorrect. Use the correct cookware.

Refer to “Hints and tips”

chapter.

The diameter of the bottom

of the cookware is too small

for the zone.

Use cookware with correct

dimensions.

Refer to “Technical informa‐

tion” chapter.

and a number come on.

There is an error in the hob. Disconnect the hob from the

electrical supply for some

time. Disconnect the fuse

from the electrical system of

the house. Connect it again.

If comes on again, speak

to an Authorised Service

Centre.

comes on.

There is an error in the hob

because a cookware boiled

dry. Automatic Switch Off

and the overheating protec‐

tion for the zones operate.

Deactivate the hob. Remove

the hot cookware. After ap‐

proximately 30 seconds, ac‐

tivate the zone again. If the

cookware was the problem,

the error message goes out.

Residual heat indicator can

stay on. Let the cookware

become sufficiently cool.

Check if your cookware is

compatible with the hob.

Refer to “Hints and tips”

chapter.

If you cannot find a solution...

If you cannot find a solution to the problem

yourself, contact your dealer or an

Authorised Service Centre. Give the data

from the rating plate. Give also three digit

letter code for the glass ceramic (it is in

the corner of the glass surface) and an

error message that comes on. Make sure,

you operated the hob correctly. If not the

servicing by a service technician or dealer

will not be free of charge, also during the

warranty period. The instructions about

the Service Centre and conditions of

guarantee are in the guarantee booklet.

INSTALLATION

WARNING! Refer to Safety

chapters.

Before the installation

Before you install the hob, write down the

information bellow from the rating plate.

14 Progress

The rating plate is on the bottom of the

hob.

Serial number ...........................

Built-in hobs

Only use the built-in hobs after you

assemble the hob into correct built-in units

and work surfaces that align to the

standards.

Connection cable

• The hob is supplied with a connection

cable.

• To replace the damaged mains cable,

use the cable type: H05V2V2-F which

withstands a temperature of 90°C or

higher. Speak to your local Service

Centre.

Attaching the seal to the rabbet

1. Clean the rabbets in the worktop.

2. Cut the supplied seal stripe into 4

stripes. The stripes must have the

same length as the rabbets.

3. Cut the ends of the stripes at an angle

of 45°. They should fit in the corners of

the rabbets accurately.

4. Attach the stripes to the rabbets. Do

not extend the stripes. Do not bond

ends of stripes one over another.

After you assemble the hob, seal the

remaining gap between glass ceramic and

the worktop with silicone. Make sure the

silicone does not get under the glass

ceramic.

Assembly

min.

50mm

min.

500mm

min.

2mm

Progress 15

min. 2 mm

A

B

A

12 mm

28 mm

38 mm

B

57 mm

41 mm

31 mm

min

30 mm

min. 500 mm

< 20 mm

> 20 mm

min. 2 mm

A

B

A

12 mm

28 mm

38 mm

B

57 mm

41 mm

31 mm

min. 500 mm

774

+1

mm

514

+1

mm

490

+1

mm

min. 55mm

750

+1

mm

R10mm

R5mm

12mm

7mm

min.

38 mm

min.

2 mm

min.

12 mm

min.

2 mm

16 Progress

Protection box

If you use a protection box (an additional

accessory), the front airflow space of 2

mm and the protective floor directly below

the hob are not necessary. The protection

box accessory may not be available in

some countries. Please contact your local

supplier.

You can not use the protection

box if you install the hob above

an oven.

TECHNICAL DATA

Rating plate

Model PAI8105I PNC 949 594 419 00

Typ 60 GBD C3 AU 220 - 240 V 50 - 60 Hz

Induction 7.4 kW Made in Germany

Ser.Nr. ................. 7.4 kW

PROGRESS

Cooking zones specification

Cooking zone Nominal pow‐

er (maximum

heat setting)

[W]

Power func‐

tion [W]

Power func‐

tion maximum

duration [min]

Cookware di‐

ameter [mm]

Left front 2300 3200 10 125 - 210

Left rear 2300 3200 10 125 - 210

Right front 2300 3200 10 125 - 210

Right rear 2300 3200 10 125 - 210

The power of the cooking zones can be

different in some small range from the

data in the table. It changes with the

material and dimensions of the cookware.

For optimal cooking results use cookware

not larger than the diameter in the table.

Progress 17

ENERGY EFFICIENCY

Product information according to EU 66/2014

Model identification PAI8105I

Type of hob Built-In Hob

Number of cooking zones 4

Heating technology Induction

Diameter of circular cook‐

ing zones (Ø)

Left front

Left rear

Right front

Right rear

21.0 cm

Energy consumption per

cooking zone (EC electric

cooking)

Left front

Left rear

Right front

Right rear

183.6 Wh / kg

172.7 Wh / kg

197.2 Wh / kg

172.7 Wh / kg

Energy consumption of the

hob (EC electric hob)

181.6 Wh / kg

EN 60350-2 - Household electric cooking

appliances - Part 2: Hobs - Methods for

measuring performance

Energy saving

You can save energy during everyday

cooking if you follow below hints.

• When you heat up water, use only the

amount you need.

• If it is possible, always put the lids on

the cookware.

• Before you activate the cooking zone

put the cookware on it.

• Put the smaller cookware on the

smaller cooking zones.

• Put the cookware directly in the centre

of the cooking zone.

• Use the residual heat to keep the food

warm or to melt it.

ENVIRONMENTAL CONCERNS

Recycle the materials with the symbol .

Put the packaging in applicable containers

to recycle it. Help protect the environment

and human health and to recycle waste of

electrical and electronic appliances. Do

not dispose appliances marked with the

symbol with the household waste.

Return the product to your local recycling

facility or contact your municipal office.

18 Progress

TABLE DES MATIÈRES

Informations de sécurité 19

Consignes de sécurité 21

Description de l'appareil 23

Utilisation quotidienne 25

Conseils 28

Entretien et nettoyage 30

En cas d'anomalie de fonctionnement 30

Installation 33

Caractéristiques techniques 36

Rendement énergétique 36

Sous réserve de modifications.

INFORMATIONS DE SÉCURITÉ

Avant d'installer et d'utiliser cet appareil, lisez

soigneusement les instructions fournies. Le fabricant ne

pourra être tenu pour responsable des blessures et dégâts

résultant d'une mauvaise installation ou utilisation.

Conservez toujours les instructions dans un lieu sûr et

accessible pour vous y référer ultérieurement.

Sécurité des enfants et des personnes vulnérables

• Cet appareil peut être utilisé par des enfants âgés d'au

moins 8 ans et par des personnes ayant des capacités

physiques, sensorielles ou mentales réduites ou dénuées

d’expérience ou de connaissance, s'ils (si elles) sont

correctement surveillé(e)s ou si des instructions relatives à

l'utilisation de l'appareil en toute sécurité leur ont été

données et si les risques encourus ont été appréhendés.

• Ne laissez pas les enfants jouer avec l'appareil.

• Ne laissez pas les emballages à la portée des enfants et

jetez-les convenablement.

• Tenez les enfants et les animaux éloignés de l'appareil

lorsqu'il est en cours de fonctionnement ou lorsqu'il

refroidit. Les parties accessibles sont chaudes.

• Si l'appareil est équipé d'un dispositif de sécurité enfants,

nous vous recommandons de l'activer.

• Le nettoyage et l'entretien par l'usager ne doivent pas être

effectués par des enfants sans surveillance.

• Les enfants de moins de 3 ans doivent être tenus éloignés

de l'appareil en permanence lorsqu'il est en

fonctionnement.

Progress 19

Sécurité générale

• AVERTISSEMENT : L'appareil et ses parties accessibles

deviennent chauds pendant son fonctionnement. Veillez à

ne pas toucher les éléments chauffants. Les enfants de

moins de 8 ans doivent être tenus à l'écart, à moins d'être

surveillés en permanence.

• Ne faites pas fonctionner l'appareil avec un minuteur

externe ou un système de commande à distance.

• AVERTISSEMENT : Il peut être dangereux de laisser

chauffer de la graisse ou de l'huile sans surveillance sur

une table de cuisson car cela pourrait provoquer un

incendie.

• N'essayez JAMAIS d'éteindre un feu avec de l'eau.

Éteignez l'appareil puis couvrez les flammes, par exemple

avec un couvercle ou une couverture ignifuge.

• ATTENTION : Toute cuisson doit être surveillée. Une

cuisson courte doit être surveillée en permanence.

• AVERTISSEMENT : Risque d'incendie ! N'entreposez rien

sur les surfaces de cuisson.

• Ne posez pas d'objets métalliques tels que couteaux,

fourchettes, cuillères ou couvercles sur la table de cuisson

car ils pourraient chauffer.

• N'utilisez pas de nettoyeur vapeur pour nettoyer l'appareil.

• Après utilisation, éteignez toujours la zone de cuisson à

l'aide de la manette de commande correspondante et ne

vous fiez pas à la détection des récipients.

• Si la surface vitrocéramique / en verre est fissurée,

éteignez l'appareil pour éviter tout risque d'électrocution.

• Si le câble d'alimentation est endommagé, il doit être

remplacé par le fabricant, un service de maintenance

agréé ou un technicien qualifié afin d'éviter tout danger.

• AVERTISSEMENT : Utilisez uniquement les dispositifs de

protection pour table de cuisson conçus ou indiqués

comme adaptés par le fabricant de l'appareil de cuisson

dans les instructions d'utilisation, ou les dispositifs de

protection pour table de cuisson intégrés à l'appareil.

20 Progress

La page charge ...

Progress PAI8105I Manuel utilisateur

Progress PAI8105I Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents