iHome iBT78 Guide de démarrage rapide

Taper
Guide de démarrage rapide
iHome
iBT78V2
In the Box
» iBT78v2 speaker » charging cable
» carry strap
QUICK START GUIDE
BLUETOOTH: PAIRING & PLAYING USING SPEAKERPHONE
» Make your Bluetooth device “discoverable”
» Power on speaker (switch is on bottom
of speaker)
» The first time the unit is powered on it will
enter auto-pairing mode.
» Select “iHome iBT78v2” on your device’s
Bluetooth menu to complete pairing.
» To manually pair, power on speaker then
press and hold Bluetooth Button for 2 sec.
» Press Play/Pause Button to play and pause
Bluetooth audio.
» Press –/+ Buttons to adjust speaker volume.
Manual Pairing
Pairing the First Time
o on
iHome
iBT78V2
Answer Call
End Call
o on
2s
CHARGE UNIT
BEFORE USE
ABOUT 6 HOURS
Bluetooth/
Speakerphone/
Play/Pause
Button
Color Mode Button
(press and hold
for Battery Review)
Volume
Buttons
USB Charging
in Port
Carry Strap
Channel
Charge via USB AC
adapter
(not included)
or other powered
USB port
USB Charging Cable
(included)
LED STATUS INDICATORS
(TOP OF UNIT)
Flashing red = charging
O = fully charged
Flashing red = low battery
(not connected)
Flashing blue = pairing
Solid blue = connected to bluetooth
Contact Us: 1800288 2792
For warranty visit:
www.ihome.com/support
Color Changing Rechargeable
Bluetooth Speaker
with Speakerphone
Model: iBT78V2
Red charging
LED
Blue Bluetooth LED
iBT78v2 QSG
Size: 240mmW x 100mmH
folded: 60mmW x 100mmH
Mar 02, 2018
material: 260gsm2 art card, 2C + 1C
PMS7467C
BATTERY LEVEL REVIEW
LowVery Low
RED GREEN
Good
High
2s
FCC Information
This device complies with Part 15 of the FCC Rules, operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must
accept any interference received, including interference that
may cause undesired operation.
FCC Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits
set forth for an uncontrolled environment.
Warning: Changes or modifications to this unit not expressly
approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment o and on, the user is
encouraged to try to correct the interference by one or more of
the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit dierent
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for
help.
CAN ICES-3 (B)/NMB-3(B)
FCC ID: EMOIBT75N
IC: 986B-IBT75N
Internal Rechargeable Lithium-ion Battery
Canada Statement
This device complies with Industry Canada’s
licence-exempt RSSs. Operation is subject to the following
two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including
interference that may cause undesired operation of the
device.
Le présent appareil est conforme aux CNR d’Industrie
Canada applicables aux appareils radio exempts de
licence. L’exploitation est autorisée aux deux conditions
suivantes :
(1) l’appareil ne doit pas produire de brouillage;
(2) l’utilisateur de l’appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est
susceptible d’en compromettre le fonctionnement.
The device meets the exemption from the routine
evaluation limits in section 2.5 of RSS 102 and compliance
with RSS-102 RF exposure, users can obtain Canadian
information on RF exposure and compliance.
Le dispositif rencontre l'exemption des limites courantes
d'évaluation dans la section 2.5 de RSS 102 et la
conformité à l'exposition de RSS-102 rf, utilisateurs peut
obtenir l'information canadienne sur l'exposition et la
conformité de rf.
This device uses an internal non-replaceable rechargeable
lithium-ion battery that should last the lifetime of the device.
If you suspect your battery may be dead, try charging it for
an extended period of time and try resetting the unit. If this
fails, contact Customer Service at 1-800-288-2792.
WARNING/DISPOSAL OF UNIT
Do NOT attempt to change the battery. Doing so will void
the warranty and could cause injury and damage to your
device. To dispose of the unit, follow the instructions below:
Never dispose of used batteries/electronics with ordinary
solid wastes, since they contain toxic substances.
Always dispose of used batteries/electronics in accordance
with the prevailing community regulations.
Many electronics retailers now recycle batteries and other
electronic components at no charge
GENERAL BATTERY PRECAUTIONS
Never use or charge a battery if it appears to be leaking,
discolored, deformed, or in any way abnormal.
Never disassemble the unit or attempt to remove battery
as that could cause leakage of alkaline solution or other
electrolytic substances.
Avoid charging a rechargeable battery when the
temperature is not within 5°C - 35° C (41° - 95°
Fahrenheit).
Never expose a battery to any liquid.
Never expose a battery to excessive heat such as direct
sunlight or fire. Never use a battery pack in an unventilated
vehicle where excessive internal temperatures may be
encountered.
Always keep batteries out of the reach of infants and small
children.
Bluetooth is a registered trademarks of Bluetooth SIG
Inc. Bluetooth technology is incorporated under
license from Bluetooth SIG Inc.
» Press and hold the Color Mode Button
when unit is ON but not charging (micro
USB cable not connected) to enter
Battery Review Mode.
» The speaker must be on and connected
with a paired Bluetooth device to receive
calls.
» Press the Speakerphone Button to answer
incoming call. Press again to end call.
Press and hold to ignore.
COLOR CHANGING MODE
» Press the Color Mode Button as needed to
cycle through color modes:
» SLOW » FAST » FREEZE COLOR
» PULSE TO MUSIC» PRESET PULSE» OFF
iBT78v2-180302-A Printed in China
TIP: On some iOS (Apple) devices, you
can view the iBT78v2 battery status on
your device’s screen. When device is
paired and connected, look for a
vertical battery icon next to the
Bluetooth icon on the upper right
corner of the device’s screen.
  • Page 1 1

iHome iBT78 Guide de démarrage rapide

Taper
Guide de démarrage rapide

dans d''autres langues