Sheet 1 of 1
Rev. D, June 6, 2017© Bosch Automotive Service Solutions Inc.
Form No. 521075
655 Eisenhower Drive
Owatonna, MN 55060 USA
Phone: (507) 455-7000
Tech. Serv.: (800) 533-6127
Fax: (800) 955-8329
Order Entry: (800) 533-6127
Fax: (800) 283-8665
International Sales: (507) 455-7223
Fax: (507) 455-7063
Passenger/Mid-size Truck
Wheel Step
Max. Capacity: 300 lbs.
The passenger/mid-size truck wheel step is designed to help the technician easily reach engine parts
.
Safety Precautions
CAUTION: To prevent equipment failure or damage resulting in personal injury:
• Read, understand, and follow these instructions.
- If the operator cannot read English, operating instructions and safety precautions must
be read and discussed in the operatorʼs native language.
- Si el operador no puede leer inglés, las instrucciones de operación y las precauciones
de seguridad deberán leerse y comentarse en el idioma nativo del operador.
- Si lʼutilisateur ne peut lire lʼanglais, les instructions et les consignes de sécurité doivent
lui être expliquées dans sa langue maternelle.
• Wear eye protection that meets the requirements of ANSI Z87.1 and OSHA.
• Inspect the condition of the wheel step before each use; do not use a wheel step if itʼs
damaged, altered, or in poor condition.
• Do not exceed the rated capacity of the wheel step.
• The vehicle must be located on a hard, level surface to use the wheel step. The vehicle
must be stable.
• Chock the wheels of the vehicle and set the parking brake before using the wheel step.
Placement Instructions
Assembly Instructions
for: 1534
1534A
Wheel Step Placement
1. Remove pins and adjust wheel step to best
t the width and the height of the tire; then
replace pins.
2. Carefully place wheel step over the tire.
3. Before standing on the step, test it by placing
one foot onto the grid to verify the wheel step
is secure.
Remove pins to
adjust width
Remove pins to
adjust height
-
1
