Wacker Neuson LTW20Z1-V Manuel utilisateur

Taper
Manuel utilisateur

Ce manuel convient également à

Operator’s Manual
Notice d'emploi
Light Tower
Tour d’éclairage
LTW20Z1-V
LTW20Z3-V
Type LTW20Z1-V, LTW20Z3-V
Document
5200013129
Date 1215
Version 04
Language
EN
-FR
5200013129
Copyright notice
© Copyright 2015 by Wacker Neuson Production Americas LLC
All rights, including copying and distribution rights, are reserved.
This publication may be photocopied by the original purchaser of the
machine. Any other type of reproduction is prohibited without express
written permission from Wacker Neuson Production Americas LLC.
Any type of reproduction or distribution not authorized by Wacker
Neuson Production Americas LLC represents an infringement of valid
copyrights. Violators will be prosecuted.
Trademarks
All trademarks referenced in this manual are the property of their
respective owners.
Manufacturer
Wacker Neuson Production Americas LLC
N92W15000 Anthony Avenue
Menomonee Falls, WI 53051 U.S.A.
Tel: (262) 255-0500 · Fax: (262) 255-0550 · Tel: (800) 770-0957
www.wackerneuson.com
Original instructions
This Operator’s Manual presents the original instructions. The original
language of this Operator’s Manual is American English.
LTW 20Z -V Foreword
wc_tx003373gb.fm 3
Foreword
SAVE THESE INSTRUCTIONS—This manual contains important instructions for
the machine models below. These instructions have been written expressly by
Wacker Neuson Production Americas LLC and must be followed during installation,
operation, and maintenance of the machines.
Machines
covered by
this manual
This manual covers machines with the following item numbers:
Machine
identification
A nameplate listing the model number, item number, revision number, and serial
number is attached to this machine. The location of the nameplate is shown above.
Serial number
(S/N)
For future reference, record the serial number in the space provided below. You will
need the serial number when requesting parts or service for this machine.
Machine
documentation
From this point forward in this documentation, Wacker Neuson Production
Americas LLC will be referred to as Wacker Neuson.
Keep a copy of the Operator’s Manual with the machine at all times.
Use the separate Parts Book supplied with the machine to order replacement
parts.
If you are missing any of these documents, please contact Wacker Neuson to
order a replacement or visit www.wackerneuson.com.
When ordering parts or requesting service information, be prepared to provide
the machine model number, item number, revision number, and serial number.
Machine Item Number
LTW 20Z1-V 5200012866, 5200012880, 5200012884
LTW 20Z3-V 5200012867, 5200012881, 5200012885
LTW 20Z1-V S 5200018557, 5200018561, 5200018565
LTW 20Z3-V S 5200018558, 5200018562, 5200018566
LTW 20Z1-V S (Skid) 5100015093
LTW 20Z3-V S (Skid) 5100015094
wc_gr011408
Serial Number:
Foreword LTW 20Z -V
4 wc_tx003373gb.fm
Expectations
for
information in
this manual
This manual provides information and procedures to safely operate and
maintain the above Wacker Neuson model(s). For your own safety and to
reduce the risk of injury, carefully read, understand, and observe all instructions
described in this manual.
Wacker Neuson expressly reserves the right to make technical modifications,
even without notice, which improve the performance or safety standards of its
machines.
The information contained in this manual is based on machines manufactured
up until the time of publication. Wacker Neuson reserves the right to change
any portion of this information without notice.
The illustrations, parts, and procedures in this manual refer to Wacker Neuson
factory-installed components. Your machine may vary depending on the
requirements of your specific region.
CALIFORNIA
Proposition
65 Warning
Combustion exhaust, some of its constituents, and certain vehicle components
contain or emit chemicals known to the State of California to cause cancer and
birth defects or other reproductive harm.
Laws
pertaining to
spark
arresters
NOTICE: State Health Safety Codes and Public Resources Codes specify that in
certain locations spark arresters be used on internal combustion engines that use
hydrocarbon fuels. A spark arrester is a device designed to prevent accidental dis-
charge of sparks or flames from the engine exhaust. Spark arresters are qualified
and rated by the United States Forest Service for this purpose. In order to comply
with local laws regarding spark arresters, consult the engine distributor or the local
Health and Safety Administrator.
Manufacturers
approval
This manual contains references to approved parts, attachments, and modifica-
tions. The following definitions apply:
Approved parts or attachments are those either manufactured or provided by
Wacker Neuson.
Approved modifications are those performed by an authorized Wacker
Neuson service center according to written instructions published by Wacker
Neuson.
Unapproved parts, attachments, and modifications are those that do not
meet the approved criteria.
Unapproved parts, attachments, or modifications may have the following conse-
quences:
Serious injury hazards to the operator and persons in the work area
Permanent damage to the machine which will not be covered under warranty
Contact your Wacker Neuson dealer immediately if you have questions about
approved or unapproved parts, attachments, or modifications.
Table of Contents
LTW 20Z-V
wc_bo5200013127_04TOC.fm
5
Foreword 3
1 Safety Information 9
1.1 Signal Words Used in this Manual ....................................................... 9
1.2 Machine Description and Intended Use ............................................. 10
1.3 Safety Guidelines for Operating the Machine ..................................... 11
1.4 Lamp Safety ....................................................................................... 13
1.5 Operator Safety while Using Internal Combustion Engines ............... 14
1.6 Safety Guidelines for Towing the Machine ......................................... 15
1.7 Service Safety .................................................................................... 16
1.8 Hydraulic Fluid Safety ........................................................................ 17
1.9 Safety Guidelines for Lifting the Machine ........................................... 18
1.10 Reporting Safety Defects ................................................................... 18
1.11 Radiation Compliance ........................................................................ 18
2 Labels 19
2.1 Label Locations LTW 20ZX-V ............................................................ 19
2.2 Label Locations LTW 20ZX-VS .......................................................... 21
2.3 Label Meanings .................................................................................. 23
3 Lifting and Transporting 35
3.1 Before Lifting or Transporting Checklist ............................................ 35
3.2 Before Towing Checklist ..................................................................... 36
3.3 Lifting the Machine ............................................................................. 37
3.4 Tying Down and Transporting the Machine ........................................ 38
3.5 Testing the Breakaway System (Electric Brakes) .............................. 39
3.6 Testing the Breakaway System (Hydraulic Surge Brakes) ................. 41
4 Operation 43
4.1 Preparing the Machine for First Use ................................................... 43
4.2 General Sequence of Operation ......................................................... 43
4.3 Control Panels .................................................................................... 44
4.4 Positioning the Machine ..................................................................... 45
4.5 Mounting the Machine ........................................................................ 46
4.6 Ground Connection ............................................................................ 47
4.7 Leveling the Trailer ............................................................................. 48
4.8 Refueling the Machine ........................................................................ 49
4.9 Aiming the Lights - LTN-V .................................................................. 50
Table of Contents
LTW 20Z-V
wc_bo5200013127_04TOC.fm
6
4.10 Before Starting ....................................................................................53
4.11 Starting the Engine ..............................................................................54
4.12 Operating the Lights ............................................................................55
4.13 Meanings of Genset Controller Indicator Lights ..................................56
4.14 Stopping the Machine ..........................................................................58
4.15 Automatic/Remote Start-Up ................................................................58
4.16 Generator Derating ..............................................................................58
4.17 Load Balancing ....................................................................................59
4.18 Raising the Tower ...............................................................................60
4.19 Lowering the Tower .............................................................................61
4.20 Manually Rotating the Mast .................................................................62
4.21 Receptacle Panel ................................................................................63
4.22 Emergency Stop Switch ......................................................................65
4.23 Emergency Shutdown Procedure ........................................................66
5 Factory-Installed Options 67
5.1 Available Options ................................................................................67
5.2 Cold Weather Options .........................................................................69
5.3 North Slope Options ............................................................................70
6 Maintenance 73
6.1 Periodic Maintenance Schedule ..........................................................73
6.2 Replacing / Removing Lamps .............................................................75
6.3 Inspecting the Machine .......................................................................76
6.4 Checking the Engine Coolant Level ....................................................77
6.5 Servicing the Air Cleaner .....................................................................78
6.6 Changing the Engine Oil .....................................................................79
6.7 Maintaing the Fuel and Water Separator ............................................81
6.8 Maintaining the Trailer .........................................................................82
6.9 Long-Term Storage .............................................................................83
6.10 Connecting and Maintaining the Battery .............................................84
7 Troubleshooting 85
8 Technical Data 87
8.1 Engine .................................................................................................87
8.2 Generator ............................................................................................88
8.3 Machine - LTW 20Z[X]-V .....................................................................89
Table of Contents
LTW 20Z-V
wc_bo5200013127_04TOC.fm
7
8.4 Machine - LTW 20Z[X]-VS ................................................................. 90
8.5 Dimensions - LTW20ZX-V .................................................................. 91
8.6 Dimensions - LTW20ZX-VS ............................................................... 91
8.7 Dimensions - LTW Skid ...................................................................... 91
Tire Safety Information 92
9 Schematics 105
9.1 LTW 20Z-1—Electrical Schematic ................................................... 106
9.2 LTW 20Z-1—Electrical Schematic Components .............................. 107
9.3 LTW 20Z-3—Electrical Schematic ................................................... 108
9.4 LTW 20Z-3—Electrical Schematic Components .............................. 109
9.5 Engine Wiring ................................................................................... 110
9.6 Engine Wiring Components .............................................................. 111
9.7 Trailer Wiring (Electric Brakes) ......................................................... 112
9.8 Trailer Wiring Components (Electric Brakes) ................................... 112
9.9 Trailer Wiring (Surge Brakes / No Brakes) ....................................... 113
9.10 Hydraulic Schematic ......................................................................... 114
9.11 Electrial Schematic-Power Rotator ................................................... 115
Table of Contents
LTW 20Z-V
wc_bo5200013127_04TOC.fm
8
wc_si000780gb.fm
9
LTW 20Z -V Safety Information
1 Safety Information
1.1 Signal Words Used in this Manual
This manual contains DANGER, WARNING, CAUTION, NOTICE, and NOTE
signal words which must be followed to reduce the possibility of personal injury,
damage to the equipment, or improper service.
NOTICE: Used without the safety alert symbol, NOTICE indicates a situation
which, if not avoided, could result in property damage.
Note: A Note contains additional information important to a procedure.
This is the safety alert symbol. It is used to alert you to potential personal hazards.
f Obey all safety messages that follow this symbol.
DANGER
DANGER indicates a hazardous situation which, if not avoided, will result in death
or serious injury.
f To avoid death or serious injury from this type of hazard, obey all safety
messages that follow this signal word.
WARNING
WARNING indicates a hazardous situation which, if not avoided, could result in
death or serious injury.
f To avoid possible death or serious injury from this type of hazard, obey all safety
messages that follow this signal word.
CAUTION
CAUTION indicates a hazardous situation which, if not avoided, could result in
minor or moderate injury.
f To avoid possible minor or moderate injury from this type of hazard, obey all
safety messages that follow this signal word.
wc_si000780gb.fm
10
Safety Information LTW 20Z -V
1.2 Machine Description and Intended Use
Machine
description
This machine is a mobile, trailer-mounted light tower. The Wacker Neuson Light
Tower consists of a trailer with a cabinet containing a diesel engine, a fuel tank, a
control panel, and an electric alternator. A telescoping tower with four metal halide
lights is vertically mounted to the top of the machine. A hydraulic cylinder,
combined with a cable and pulley system, raises and lowers the telescoping tower.
As the engine runs, the generator converts mechanical energy into electric power.
The metal halide lights run off this power. Receptacle(s) are also provided to power
auxiliary loads. The operator uses the control panel to operate and monitor the
machine.
Intended use
This machine is intended for the illumination of outdoor areas. This machine is also
intended for the purpose of supplying electrical power to connected loads. Refer to
the machine specifications for the output voltage and frequency, and for the
maximum output power limit of this Light Tower.
This machine has been designed and built strictly for the intended use described
above. Using the machine for any other purpose could permanently damage the
machine or seriously injure the operator or other persons in the area. Machine
damage caused by misuse is not covered under warranty. The following are some
examples of misuse:
Connecting a load that has voltage and frequency requirements that are
incompatible with the machine output
Overloading the machine with a device that draws excessive power during
either continuous running or startup
Operating the machine in a manner that is inconsistent with all federal, state,
and local codes and regulations
Using the machine as a ladder, support, or work surface
Using the machine to carry or transport passengers or equipment
Using the machine as a hoist, or hanging items from the tower
Operating the machine outside of factory specifications
Operating the machine in a manner inconsistent with all warnings found on the
machine and in the Operator’s Manual
This machine has been designed and built in accordance with the latest global
safety standards. It has been carefully engineered to eliminate hazards as far as
practicable and to increase operator safety through protective guards and labeling.
However, some risks may remain even after protective measures have been taken.
They are called residual risks. On this machine, they may include exposure to:
Heat, noise, exhaust, and carbon monoxide from the engine
Heat from the lights
Ultraviolet radiation from the lights
Fire hazards from improper refueling techniques
Fuel and its fumes
Electric shock and arc flash
Personal injury from improper lifting the trailer tongue
wc_si000780gb.fm
11
LTW 20Z -V Safety Information
Glare from lights (lights may blind drivers of nearby motor vehicles if the lights
are incorrectly positioned)
Typical hazards related to towing a trailer on roads and highways
To protect yourself and others, make sure you thoroughly read and understand the
safety information presented in this manual before operating the machine.
1.3 Safety Guidelines for Operating the Machine
Operator
training
Before operating the machine:
Read and understand the operating instructions contained in all manuals
delivered with the machine.
Familiarize yourself with the location and proper use of all controls and safety
devices.
Contact Wacker Neuson for additional training if necessary.
When operating this machine:
Do not allow improperly trained people to operate the machine. People
operating the machine must be familiar with the potential risks and hazards
associated with it.
Operator
qualifications
Only trained personnel are permitted to start, operate, and shut down the machine.
They also must meet the following qualifications:
have received instruction on how to properly use the machine
are familiar with required safety devices
The machine must not be accessed or operated by:
children
people impaired by alcohol or drugs
Application
area
Be aware of the application area.
Keep unauthorized personnel, children, and pets away from the machine.
Remain aware of changing positions and the movement of other equipment and
personnel in the application area/job site.
Identify whether special hazards exist in the application area, such as toxic
gases, or unstable ground conditions, and take appropriate action to eliminate
the special hazards before using the machine.
Be aware of the application area.
Do not operate the machine in areas that contain flammable objects, fuels, or
products that produce flammable vapors.
Safety
devices,
controls, and
attachments
Only operate the machine when:
All safety devices and guards are in place and in working order.
All controls operate correctly.
The machine is set up correctly according to the instructions in the Operator’s
Manual.
The machine is clean.
wc_si000780gb.fm
12
Safety Information LTW 20Z -V
The machine’s labels are legible.
To ensure safe operation of the machine:
Do not operate the machine if any safety devices or guards are missing or
inoperative.
Do not modify or defeat the safety devices.
Only use accessories or attachments that are approved by Wacker Neuson.
Safe
operating
practices
When operating this machine:
Remain aware of the machine’s moving parts. Keep hands, feet, and loose
clothing away from the machine’s moving parts.
When operating this machine:
Do not operate a machine in need of repair.
Personal
Protective
Equipment
(PPE)
Wear the following Personal Protective Equipment (PPE) while operating this
machine:
Close-fitting work clothes that do not hinder movement
Safety glasses with side shields
Hearing protection
Safety-toed footwear
Work area
Make sure the area immediately surrounding the Light Tower is clean, neat, and
free of debris.
The tower extends up to 9 m (30 ft). Make sure the area above the trailer is
open and clear of overhead wires and obstructions.
Machine
setup
Make sure the machine is on a firm, level surface and will not tip, roll, slide, or
fall while operating.
Make sure the machine is well-grounded and securely fastened to a good
earthen ground per national and local regulations.
The trailer must be leveled and the outriggers extended before raising the tower.
The outriggers must be extended while the tower is up.
Never connect the machine to other power sources, such as supply mains of
power companies.
Machine
integrity
Do not start a machine in need of repair.
Do not use the machine if the insulation on any electrical cord is cut or worn
through.
Do not operate the lights without the protective lens cover in place or with a lens
cover that is cracked or damaged.
Replace or repair electrical components with components that are identical in
rating and performance to the originals.
While
operating the
machine
Keep the area behind the trailer clear of people and obstructions while raising
and lowering the tower.
wc_si000780gb.fm
13
LTW 20Z -V Safety Information
Do not raise the tower or operate the machine in high winds. Lower the tower
immediately if high winds or electrical storms are expected in the area.
Do not raise, lower, or turn the tower while the unit is operating.
If any part of the tower hangs up, or the winch cable develops slack while raising
or lowering the tower, STOP immediately! Contact an authorized Wacker
Neuson service representative.
Do not disengage the tower locking pin while the tower is up.
Lamps become extremely hot in use! Allow the lamps and fixtures to cool 10–15
minutes before handling.
Lower the tower when not in use.
1.4 Lamp Safety
Description
The lamps provided with your Light Tower are electric discharge lamps. They are
designed for use with metal halide ballasts only, and require time to reach full
brightness on initial startup and after a power interruption. These lamps comply
with FDA regulation performance standards 21 CFR 1040-30.
Operating
safety
Replace damaged lamps according to the instructions in section Removing /
Replacing Lamps.
Alternative lamps that automatically extinguish when the outer envelope is
broken or punctured are commercially available.
WARNING
Personal injury hazard. Broken or punctured lamps can cause serious skin burns
and eye inflammation from shortwave ultraviolet radiation.
f Do not operate the Light Tower if a lamp is damaged.
f Replace damaged lamps immediately.
wc_si000780gb.fm
14
Safety Information LTW 20Z -V
1.5 Operator Safety while Using Internal Combustion Engines
Operating
safety
When running the engine:
Keep the area around exhaust pipe free of flammable materials.
Check the fuel lines and the fuel tank for leaks and cracks before starting the
engine. Do not run the machine if fuel leaks are present or the fuel lines are
loose.
When running the engine:
Do not smoke while operating the machine.
Do not run the engine near sparks or open flames.
Do not touch the engine or muffler while the engine is running or immediately
after it has been turned off.
Do not operate a machine when its fuel cap is loose or missing.
Do not start the engine if fuel has spilled or a fuel odor is present. Move the
machine away from the spill and wipe the machine dry before starting.
Refueling
safety
When refueling the engine:
Clean up any spilled fuel immediately.
Refill the fuel tank in a well-ventilated area.
Re-install the fuel tank cap after refueling.
Use suitable tools for refueling (for example, a fuel hose or funnel).
When refueling the engine:
Do not smoke.
Do not refuel a hot or running engine.
Do not refuel the engine near sparks or open flames.
WARNING
Internal combustion engines present special hazards during operation and fueling.
Failure to follow the warnings and safety standards could result in severe injury or
death.
f Read and follow the warning instructions in the engine owner’s manual and the
safety guidelines below.
DANGER
Exhaust gas from the engine contains carbon monoxide, a deadly poison.
Exposure to carbon monoxide can kill you in minutes.
f NEVER operate the machine inside an enclosed area, such as a tunnel, unless
adequate ventilation is provided through such items as exhaust fans or hoses.
wc_si000780gb.fm
15
LTW 20Z -V Safety Information
1.6 Safety Guidelines for Towing the Machine
When towing the machine:
Do not tow the machine if the towing vehicle’s hitch or the trailer’s coupler are
damaged.
Do not tow the machine if any of the trailer’s lug nuts are missing.
Do not tow the machine if the trailer’s tires have less than 1.5 mm (1/16 inch) of
tread.
Do not tow the machine unless the trailer’s brakes are functioning properly.
Do not exceed the trailer manufacturer’s speed limitations.
When towing the machine:
Only tow the machine when the trailers lug nuts are properly torqued.
Only tow the machine when the trailers tires are properly inflated.
Only tow the machine when all trailer lights are functioning correctly.
Only tow the machine when the trailers safety chains are connected to the
towing vehicle in a crisscross pattern.
Maintain extra distance between the towing vehicle and other vehicles.
Avoid soft shoulders, curbs, and sudden lane changes.
Abide by all licensing requirements for your area.
If you have not driven a towing vehicle with trailer before, practice turning,
stopping, and backing up the towing vehicle with trailer in an area away from traffic.
Only drive the towing vehicle with trailer when you are confident in your ability to do
so.
WARNING
Risk of severe injury or death. Improper trailer condition and towing technique can
lead to an accident.
f Obey the trailer manufacturer’s instructions and the instructions below to reduce
the risk of an accident.
wc_si000780gb.fm
16
Safety Information LTW 20Z -V
1.7 Service Safety
Precautions
To reduce the risk of personal injury, read and understand the service
procedures before performing any service to the machine.
All adjustments and repairs MUST be completed before operation. Do not
operate the machine with a known problem or deficiency! All repairs and
adjustments should be completed by a qualified technician.
Do not service the machine if your clothing or skin is wet.
Personal
Protective
Equipment
(PPE)
Wear the following Personal Protective Equipment (PPE) while servicing or
maintaining this machine:
Close-fitting work clothes that do not hinder movement
Safety glasses with side shields
Hearing protection
Safety-toed footwear
In addition, before servicing or maintaining the machine:
Tie back long hair.
Remove all jewelry (including rings).
Before
servicing the
machine
Turn the engine off before performing maintenance or making repairs.
Make sure the engine start switch is turned to OFF.
Make sure the circuit breakers are open (off).
Make sure the negative terminal on the battery is disconnected.
Do not perform even routine service (oil / oil filter changes, cleaning, etc.) unless
all electrical components are shut down.
Make sure water has not accumulated around the base of the machine. If water
is present, move the machine and allow it to dry before servicing.
If the machine must be started while servicing, keep hands, feet, and loose
clothing away from moving parts on the generator and engine.
Safety
devices and
modifications
Replace all safety devices and guards after repair and maintenance.
Do not modify the machine without the express written approval of the
manufacturer.
Replacing
parts and
labels
Replace worn or damaged components.
Use only spare parts recommended by Wacker Neuson.
Replace all missing and hard-to-read labels.
Check all external fasteners at regular intervals.
WARNING
High voltage! This machine produces high voltage capable of causing serious injury
or death.
f Only a qualified electrician should troubleshoot or repair electrical problems
occurring with this machine.
wc_si000780gb.fm
17
LTW 20Z -V Safety Information
Lifting and
transporting
When lifting the machine:
Make sure slings, chains, hooks, ramps, jacks and other types of lifting devices
are attached securely and have enough weight-bearing capacity to lift or hold
the machine safely.
Remain aware of the location of other people when lifting the machine.
To reduce the possibility of injury:
Do not stand under the machine while it is being hoisted or moved.
Do not get onto the machine while it is being hoisted or moved.
1.8 Hydraulic Fluid Safety
Safety
instructions
Inspect the hydraulic system thoroughly before operating the machine.
Do not touch hydraulic fluid or hydraulic components while the machine is
operating. Wait until the machine is cool.
Before disconnecting hydraulic fittings or hoses, ensure that all pressure has
been bled from the circuit. Set all controls in neutral, turn engine off, and allow
the fluids to cool before loosening hydraulic fittings or attaching test gauges.
Hydraulic fluid escaping under high pressure may penetrate the skin, cause
burns, blind, or cause other serious injuries or infections. Contact a physician
immediately for treatment if your skin has been penetrated by hydraulic fluid,
even if the wound seems minor.
Fluid leaks from small holes are often practically invisible. Do not use your bare
hands to check for leaks. Check for leaks using a piece of cardboard or wood.
Hydraulic fluid is extremely flammable. Stop the engine immediately if a
hydraulic leak is detected.
After servicing the hydraulics, make sure all components are reconnected to the
proper fittings. Failure to do so may result in damage to the machine and/or
injury to a person on or near the machine.
WARNING
Possibility of severe injury. Hydraulic fluid is under high pressure and becomes very
hot during operation.
f To avoid injury, obey the safety instructions listed below.
wc_si000780gb.fm
18
Safety Information LTW 20Z -V
1.9 Safety Guidelines for Lifting the Machine
When lifting the machine:
Make sure slings, chains, hooks, ramps, jacks, forklifts, cranes, hoists, and any
other type of lifting device used is attached securely and has enough weight-
bearing capacity to lift or hold the machine safely. See section Technical Data
for machine weight.
Remain aware of the location of other people when lifting the machine.
Only use the lifting points and tie-downs described in the Operator’s Manual.
Make sure the transporting vehicle has sufficient load capacity and platform size
to safely transport the machine.
To reduce the possibility of injury:
Do not stand under the machine while it is being lifted or moved.
Do not get onto the machine while it is being lifted or moved.
1.10 Reporting Safety Defects
If you believe your trailer has a defect which could cause a crash or could cause
injury or death, you should immediately inform the National Highway Traffic Safety
Administration (NHTSA) in addition to notifying Wacker Neuson.
If NHTSA receives similar complaints, it may open an investigation; and if it finds
that a safety defect exists in a group of trailers, it may order a recall and remedy
campaign. However, NHTSA cannot become involved in individual problems
between you, your dealer, or Wacker Neuson.
To contact NHTSA, you may either contact the Vehicle Safety Hotline toll-free at
1-888-327-4236 (TTY: 1-800-424-9153); go to http://www.safercar.gov; or write to:
Administrator
NHTSA
1200 New Jersey Avenue S.E.
Washington, DC 20590
You can also obtain other information about your motor vehicle safety from
http://www.safercar.gov
1.11 Radiation Compliance
This machine meets the radio interference radiated emission requirements of
European Standard EN 13309 for Construction Machinery.
The lamps provided with this machine are electric discharge lamps. They are
designed for use with metal halide ballasts only, and require time to reach full
brightness on initial startup and after a power interruption. These lamps comply
with FDA regulation performance standards 21 CFR 1040-30.
wc_si000781gb.fm
19
LTW 20Z-V Labels
2 Labels
2.1 Label Locations LTW 20ZX-V
wc_gr011425
hh
r
z
ff
jj
u
g
ajm
q
k
f s h
oo
yy
q
ccd
cc
t
hh
e
j
c
z
qq
kk
bb
bb
bb
n z
pp
w
mm
rr
wc_si000781gb.fm
20
Labels LTW 20Z-V
wc
_g
r011426
jj
n
aa
v
yy
ww
vv
zz
cc d
m
b
o
g
xx
tt
uu
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168
  • Page 169 169
  • Page 170 170
  • Page 171 171
  • Page 172 172
  • Page 173 173
  • Page 174 174
  • Page 175 175
  • Page 176 176
  • Page 177 177
  • Page 178 178
  • Page 179 179
  • Page 180 180
  • Page 181 181
  • Page 182 182
  • Page 183 183
  • Page 184 184
  • Page 185 185
  • Page 186 186
  • Page 187 187
  • Page 188 188
  • Page 189 189
  • Page 190 190
  • Page 191 191
  • Page 192 192
  • Page 193 193
  • Page 194 194
  • Page 195 195
  • Page 196 196
  • Page 197 197
  • Page 198 198
  • Page 199 199
  • Page 200 200
  • Page 201 201
  • Page 202 202
  • Page 203 203
  • Page 204 204
  • Page 205 205
  • Page 206 206
  • Page 207 207
  • Page 208 208
  • Page 209 209
  • Page 210 210
  • Page 211 211
  • Page 212 212
  • Page 213 213
  • Page 214 214
  • Page 215 215
  • Page 216 216
  • Page 217 217
  • Page 218 218
  • Page 219 219
  • Page 220 220
  • Page 221 221
  • Page 222 222
  • Page 223 223
  • Page 224 224
  • Page 225 225
  • Page 226 226
  • Page 227 227
  • Page 228 228
  • Page 229 229
  • Page 230 230
  • Page 231 231
  • Page 232 232
  • Page 233 233
  • Page 234 234
  • Page 235 235
  • Page 236 236
  • Page 237 237
  • Page 238 238
  • Page 239 239
  • Page 240 240
  • Page 241 241
  • Page 242 242
  • Page 243 243
  • Page 244 244

Wacker Neuson LTW20Z1-V Manuel utilisateur

Taper
Manuel utilisateur
Ce manuel convient également à

dans d''autres langues