Allmand LIGHT TOWER, MAXI-LITE II/MINE SPEC/RIG SPEC Manuel utilisateur

Not for

Reproduction

www.allmand.com

P| 308.995.4495

T| 800.562.1373

F| 308.995.5887

PARTS F| 308.995.4883

Operator’s Manual

Maxi-Lite II

®

/ Mine Spec

®

/ Rig Spec

®

PART NO. 104819 - REVISION B

en

fr

es

Manual del operador

Maxi-Lite II

®

/ Mine Spec

®

/ Rig Spec

®

Manuel d'utilisation

Maxi-Lite II

®

/ Mine Spec

®

/ Rig Spec

®

Not for

Reproduction

IMPORTANT INFORMATION

Company Equipment Number:__________________

Model Number:___________________________

Serial Number:______________________________

Engine Model Number:_________________________

Engine Serial Number:__________________________

Generator Model Number:______________________

Generator Serial Number:_______________________

California

Proposition 65 Warning

Diesel engine exhaust and some of its

constituents are known to the State of

California to cause cancer, birth

defects, and other reproductive harm.

California

Proposition 65 Warning

Battery posts,terminals, and related

accessories contain lead and lead

compounds, chemicals known to the

State of California to cause cancer

and reproductive harm.

Wash hands after handling.

WARNING

Improper operation of this machine can cause death or serious injury.

Before transporting the trailer or starting the engine, do the following:

1. Read this owner’s/operator’s manual.

2. Read all safety decals on the machine.

3. Clear the area of other persons.

Learn and practice the safe use of the machine controls in a safe, clear area before you

operate this machine on a worksite.

It is your responsibility to observe applicable laws and regulations, and to follow the

manufacturer’s instructions on machine operation and maintenance.

California

Proposition 65 Warning

The engine exhaust from this product con-

tains chemicals known to the State of Cali-

fornia to cause cancer, birth defects, or other

reproductive harm.

California

Proposition 65 Warning

Battery posts, terminals, and related acces-

sories contain lead and lead compounds -

chemicals known to the State of California to

cause cancer and reproductive harm. Wash

hands after handling.

Not for

Reproduction

TABLE OF CONTENTS

MAXI-LITE II / MINE SPEC / RIG SPEC

INTRODUCTION and OVERVIEW .................1-1

SAFETY .........................................2-1

USING THE LIGHT TOWER ........................3-1

MOVING THE LIGHT TOWER ......................4-1

MAINTAINING THE LIGHT TOWER TRAILER ........5-1

SPECIFICATIONS ................................6-1

TROUBLESHOOTING ............................7-1

WARRANTY .....................................W-1

en

Not for

Reproduction

Not for

Reproduction

INTRODUCTION and OVERVIEW

MAXI-LITE II / MINE SPEC / RIG SPEC

ABOUT THIS MANUAL ..........................1-2

PRODUCT OVERVIEW ..........................1-3

Laydown Tower- Front view ..............................1-3

Laydown Tower- Rear view ...............................1-4

Vertical Tower- Front view (Four-light tower). . . . . . . . . . . . . . .1-5

Vertical Tower- Rear view (Four-light tower) ...............1-6

Vertical Tower- Front view (Six-light tower) ................1-7

Vertical Tower- Rear view (Six-light tower) .................1-8

CONTROL PANELS ............................1-10

CONTROL PANEL OVERVIEW ............................ 1-10

ENGINE PANEL ........................................ 1-10

LIGHT PANEL .......................................... 1-11

AUXILIARY POWER PANEL .............................. 1-11

TYPES OF OUTLETS .................................... 1-12

ADDITIONAL OPTIONS ........................1-14

en

Not for

Reproduction

1-2

INTRODUCTION and OVERVIEW

Congratulations on your purchase of a new Allmand

light tower. Welcome to the Allmand Family of

equipment owners.

The Allmand light tower oers many advantages to

make operation safer, more convenient and more cost

eective. It will give you high quality performance and

durability for more productivity on the job site for many

years.

ABOUT THIS MANUAL

This Operator’s Manual provides you with the

information necessary to safely and eciently operate

your light tower.

Before you operate this machine, read this manual

completely and carefully so that you understand the

safety instructions and the operation of controls and

safety equipment. You must comply with all Danger,

Warning, and Caution notices. They are for your

benet.

Specic operating instructions and specications are

included to familiarize you (the operator) and the

maintenance personnel with the correct and safe

procedures necessary to operate and maintain this

equipment in a safe and ecient manner.

Keep this manual in the manual storage canister on the

machine.

If you are uncertain about any of the information in this

manual, contact the Allmand Service Department at

1-800-562-1373, prior to operating the equipment.

Save these original instructions for future reference.

Left Side/Right Side Orientation

Any reference in this manual to left side or right side

shall be determined when viewing the machine from

the rear. The front of the machine is that end having the

light tower attached to it when the light tower is in the

vertical position.

Replacement Parts

For easy reference when ordering replacement parts or

making service inquiries regarding this machine, record

the model number and serial number of this machine,

and the engine and generator models and serial

numbers, in the “Important Information” area on the

inside of the front cover. The serial number for this

machine is stamped on the serial number plate located

on the lower right rear of the trailer.

For replacement parts, contact the Allmand Parts

Department at 1-800-562-1373.

Replacement of any part on this machine by anything

other than an Allmand authorized replacement part

may adversely aect the performance, durability, or

safety of this machine.

Disclaimer

Allmand Bros., Inc. reserves the right to make changes

on, and add improvements to, its products at any time,

without public notice or obligation. Allmand also

reserves the right to discontinue manufacturing any

product at its discretion, at any time.

The information found in this manual was in eect at

the time it was printed. Allmand Bros. may change the

contents of this manual at any time, without notice or

incurring obligation.

Not for

Reproduction

MAXI-LITE II / MINE SPEC / RIG SPEC

1-3

PRODUCT OVERVIEW

Laydown Tower- Front view

Tower latch pin

Tower rotation knob

Tower winch

Lift ring

Forklift

pockets

Manual tower

Lamp assembly

Lunette ring

Tongue jack

Chock blocks

Ball hitch

Safety

chains

Tie down loop

Step plate

Front

outrigger

Front

stabilizer

Forklift

pocket

Rear tie down loop

Forklift pocket

Rear stabilizer

Rear outrigger

Access door

Fuel tank

Tower lock pin

en

Not for

Reproduction

1-4

INTRODUCTION and OVERVIEW

Laydown Tower- Rear view

RV outlet (option)

Tail light

Serial

plate

Rear tie down loop

Forklift pocket

Winch handle

Rear panel

access door

Access door engine

Not for

Reproduction

MAXI-LITE II / MINE SPEC / RIG SPEC

1-5

Vertical Tower- Front view (Four-light tower)

Light bar

Lift ring

Lamp assembly

Hydraulic

light tower

Tongue jack

Chock blocks

Ball hitch

Safety

chains

Tie down loop

Step plate

Front

outrigger

Front stabilizer

jack

Rear stabilizer jack

Rear outrigger

Access door

en

Not for

Reproduction

1-6

INTRODUCTION and OVERVIEW

Vertical Tower- Rear view (Four-light tower)

RV outlet (option)

Tail light

Oil pan drain

Containment

tray drain

Rear panel

access door

Access door

Radiator drain

Low fuel strobe light

(Mine Spec/Rig Spec only)

Not for

Reproduction

MAXI-LITE II / MINE SPEC / RIG SPEC

1-7

Vertical Tower - Front view (Six-light tower)

Light bar

Lamp assembly

Hydraulic

tower

Tongue jack

Chock blocks

Ball hitch

Safety

chains

Lift ring

Step plate

Front

outrigger

Front stabilizer

jack

Access door

Tie down loop

Rear

outrigger

Rear stabilizer jack

en

Not for

Reproduction

1-8

INTRODUCTION and OVERVIEW

RV outlet (option)

Tail light

Oil pan drain

Containment

tray drain

Rear panel

access door

Access door engine

Radiator drain

Low fuel strobe light

(Mine Spec/Rig Spec only)

Vertical Tower - Rear view (Six-light tower)

Not for

Reproduction

MAXI-LITE II / MINE SPEC / RIG SPEC

1-9

Quick lock ball coupler

Pintel hitch and lunette ring

Bulldog ball coupler

Lunette ring

Ball

coupler

Tongue jack

Safety chains

Tie down loop

Vehicle

hitch

Latch and

release lever

Latch lever

safety pin

Trailer coupler

lunette ring

Bulldog

coupler

Tongue jack

Tie down loop

Lunette ring

Safety chains

Ball hitch

Ball

coupler

Adjustment

nut keeper

Vehicle ball

and hitch

Vehicle

receiver

Adjustment

nut

Safety

pin chain

Safety

Latch and

release lever

Lever lock

en

Not for

Reproduction

1-10

INTRODUCTION and OVERVIEW

CONTROL PANELS

CONTROL PANEL OVERVIEW

The main control panel is actually composed of three

sub-panels, which include the (1) engine panel which

controls and provides information on the engine, the

(2) light panel,which controls the tower lights, and the

(3) auxiliary power panel, which provides power.

.

1 Engine

panel

Controls engine functions.

2 Light panel Controls light functions.

3 Auxiliary

power

panel

Includes the main electrical circuit

breaker and controls all electric

outlets.

ENGINE PANEL

1 Interior

Light Switch

(optional)

Operates the interior light inside

the trailer. The ignition key must be

in the RUN position.

2 Tower Raise

/ Lower

Switch

(vertical

towers only)

Move the switch UP to raise the

tower, or DOWN to lower the tower.

The ignition key must be in the RUN

position.

3 Hourmeter Indicates the total number of hours

that the engine has been in

operation. Operates only when the

engine is running.

4 LSC 2.0

Mode

Switch

(optional)

Turns on power to the Light

Sequencing Commander. See

separate LSC 2.0 Operator’s Manual

for detailed instructions.

PHOTO

EYE

TIMER

TOWER

UP

DOWN

LIGHTS

MAIN

AUXIILARY

2

3

1

PHOTO

EYE

TIMER

TOWER

UP

DOWN

PHOTO

EYE

TIMER

TOWER

UP

DOWN

1 2 3 6

1 2 4 5

Standard

LSC 2.0 (Optional)

Not for

Reproduction

MAXI-LITE II / MINE SPEC / RIG SPEC

1-11

5 LSC 2.0

Control

(optional)

The Light Sequencing Commander

starts and stops the engine

automatically. See separate LSC 2.0

Operator’s Manual for detailed

instructions.

6 Ignition

Switch

Starts and stops the engine

manually. Turn the switch to the left

to preheat the engine before

starting. Turn the switch to the right

(RUN) to run the engine and

accessories. Turn the switch all the

way to the right (START) to start the

engine.

LIGHT PANEL

The unit comes with either four or six lights and will

come with a corresponding number of light switches.

LIGHTS

1

1 Switches Switch to turn lights on or o. The

switches also act as circuit

breakers for the lights.

For machines equipped with LSC 2.0 (option), the light

switches must be in the ON position for automatic light

control.

AUXILIARY POWER PANEL

The Main circuit breaker is located on the Auxiliary

Power Panel. The Main breaker protects all the AC lights

and outlets on the machine. It does not control the 12

Volt DC functions.

The Auxiliary circuit breaker(s), located on the Auxiliary

Power Panel, protects the 50 Amp outlet(s) located on

the right-rear panel of the machine, if the machine is so

equipped.

The 240 Volt single phase or 208 Volt three phase

outlets (if so equipped) are protected by circuit

breakers immediately above each outlet.

The 120 Volt Ground Fault Circuit Interrupter (GFCI)

outlets are duplex outlets. These are protected by push

button breakers. The upper breaker protects the left

side GFCI outlet and the lower breaker protects the

right side GFCI outlet.

1 Main

breaker

Protects all of the AC lights and

outlets on the machine.

2 240/208V

outlets and

breakers

Outlets provide 240 V/208 V power.

The breakers protect the outlets

directly below them.

3 120V GFCI

outlets and

breakers

Outlets provide 120 V power, with

Ground Fault protection. The

push-button breakers protect the

outlets.

4 Auxiliary

breaker(s)

Protects the 50 A, 208 V outlet(s) on

the right side of the machine.

MAIN

AUXIILARY

1

2

4

3

en

Not for

Reproduction

1-12

INTRODUCTION and OVERVIEW

TYPES OF OUTLETS

There are a number of dierent outlets available on the

unit. These can be in dierent combinations. Standard

outlet conguration for the unit will depend on the

generator output, but usually consists of:

• Two - 20 A, 120 V GFCI

• Two to four - 30 A, 240 V, four prong twist-lock

On machines with a three phase generator, a 50 A,

208 V outlet is included.

Your machine may be equipped with an outlet package

specic for your needs. The outlets available on the unit

are identied below:

20 Amp, 120 Volt

Duplex GFCI

NEMA 5-20R

15 Amp, 125 Volt

2-Pole, 3-Wire Twist Lock

NEMA L6-15

20 Amp, 250 Volt

2-Pin, 3-Wire

SCHUKO

30 Amp, 250 Volt

2-Pole, 3-Wire Twist Lock

NEMA L6-30R

30 Amp, 125/250 Volt

4-Pole, 4-Wire Twist Lock

NEMA L14-30R

30 Amp, 125 Volt

2-Pole, 3-Wire

NEMA TT-30R (RV)

50 Amp, 125/250 Volt

3-Pole, 4-Wire

NEMA L14-50R (RV)

50 Amp, 125/250 Volt

3-Pole, 4-Wire

CS6369 RECEPTACLE

100 Amp, 600 Volt

4-Pole, 5-Wire Pin and Sleeve

60 Amp, 600 Volt

4-Pole, 5-Wire Pin and Sleeve

10 Amp, 240 Volt

2-Pole, 3-Wire

AU1-10

Not for

Reproduction

MAXI-LITE II / MINE SPEC / RIG SPEC

1-13

Marathon Generator

6 kW 50 Hz AVR

Mecca Alte Generator

6/7.5 kW

Marathon Generator

8 kW 60 Hz AVR

Marathon Generator

13 kW

Mecca Alte Generator

8 kW 60 Hz

GENERATORS

The following generators are available as options on

the tower.

en

Not for

Reproduction

1-14

INTRODUCTION and OVERVIEW

ADDITIONAL OPTIONS

Fire extinguisher *

This is a 20-lb. multi-purpose dry chemical re

extinguisher, classied as a 10-A:120-B-C.

Emergency stop switch *

The emergency stop switch, or E-Stop, is a large button

on the front of the machine that, when pressed,

immediately shuts down the engine and all electric

lights and outlets.

Battery disconnect *

The battery disconnect is a pad-lockable switch that

renders the trailer inoperable by disconnecting the

12-volt battery from all systems on the trailer.

Exhaust system blankets *

The exhaust system blankets protect against exposure

to high heat from the exhaust system.

Wheel chocks*

A set of four wheel chocks, and brackets to hold them

on the front of the trailer, provide a convenient means

of chocking the wheels to immobilize the trailer.

Electric axle brakes

Electric axle brakes assist in slowing and stopping the

trailer. Your tow vehicle must be equipped for operating

the electric brakes and will need to have a 7-pole tail

light harness.

7-pole tail light harness

The 7-pole tail light harness connects to the tow

vehicle’s trailer tail light receptacle and allows the

operation of the trailer’s turn signals, tail and running

lights, brake lights, and electric brakes.

Low fuel strobe light*

When the fuel level in the fuel tanks is at approximately

1/8 full, the strobe light will begin blinking to indicate

the fuel is low.

Operational beacon

Provides a visible indication that the engine is running

regardless of whether the lights are on or not.

Heavy duty battery *

The heavy duty battery has 33% more starting power at

0° F (-17° C) than the standard battery, for improved

cold weather starting.

Saf-T-Visor

Saf-T-Visors attach to the light xtures and help to

reduce the glare from the lights.

Arctic Package

The arctic package is intended for machines used in

extreme cold weather conditions. It includes a 110 Volt

AC engine block heater, a 110 Volt AC battery heating

blanket, a battery box, and an interior compartment

light.

Engine Air Intake Shutdown Valve*

The Engine Air Intake Shutdown Valve automatically

shuts down the engine in the event of an over-speed

condition. A red T-handle, under the main side cover,

allows for testing of the valve.

* Standard Feature on Mine Spec / Rig Spec

Light xture

Saf-T-Visor

Not for

Reproduction

MAXI-LITE II / MINE SPEC / RIG SPEC

1-15

Vehicle Identication Number (VIN) package

The VIN package includes side marker lights, front

(amber) and rear (red), a license plate bracket and light,

reectors on the light tower, and the VIN tag.

Cable management - vertical tower

All units with vertical light towers can be equipped with

either a Nycoil power cable or a cable reel. The Nycoil

power cable is coiled around the tower mast. The cable

reel has the power cable wrapped on the cord reel

inside of it. Either system deploys automatically as the

mast is raised and retracts automatically as the mast is

lowered.

Nycoil

Vertical light tower

Cable reel

en

Not for

Reproduction

1-16

INTRODUCTION and OVERVIEW

La page est en cours de chargement...

Allmand LIGHT TOWER, MAXI-LITE II/MINE SPEC/RIG SPEC Manuel utilisateur

Ce manuel convient également à

Allmand LIGHT TOWER, MAXI-LITE II/MINE SPEC/RIG SPEC Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents