Samsung DV42H5400EF/A3 Manuel utilisateur

DV42H5400*

DV42H5200*

DV42H5000*

Gas and Electric Dryer

User manual

Imagine the possibilities

Thank you for purchasing this Samsung product.

DV5000H_03381A-08_EN+CFR+MES.indb 1 8/16/2016 1:47:48 PM

English - 2

Contents

Safety instructions 4

What you need to know about safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Important safety symbols and precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Important safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Installing your dryer 8

Unpacking your dryer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

What’s included . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Accessories (Steam model only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Important to installer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Basic requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Grounding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Gas models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Electric models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Location considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Alcove or closet installations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Ducting requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Exhausting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Dryer exhaust tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Gas requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Commonwealth of massachusetts installation instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Vent blockage test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Running the vent blockage test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Exhaust ducting guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Ducting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Electrical requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Electrical connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Connecting the inlet hose (Steam model only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Replacement parts and accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Door reversal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Type 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Type 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Final installation checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

DV5000H_03381A-08_EN+CFR+MES.indb 2 8/16/2016 1:47:48 PM

English - 3

Operating instructions, tips 25

Overview of the control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Load the dryer properly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Getting started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Rack dry (DV42H5400* Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Child Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Drum Light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Sound Oﬀ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

My Cycle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Smart Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Care and cleaning 34

Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Tumbler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Stainless steel tumbler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Dryer exterior . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Dryer exhaust system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Clean the lint ﬁlter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Special laundry tips 35

Special laundry tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Troubleshooting 36

Check these points if your dryer… . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Information codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Appendix 38

Fabric care chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Protecting the environment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Declaration of conformity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Specications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

DV5000H_03381A-08_EN+CFR+MES.indb 3 8/16/2016 1:47:48 PM

English - 4

SAVE THESE INSTRUCTIONS

Safety instructions

Congratulations on your new Samsung Dryer. This manual contains important information on the installation, use,

and care of your appliance. Please take the time to read this manual to take full advantage of your dryer’s many

beneﬁts and features.

What you need to know about safety instructions

Please read this manual thoroughly to ensure that you know how to operate the extensive features and functions

of your new appliance safely and eﬃciently. Retain the manual in a safe place near the appliance for future

reference. Use this appliance only for its intended purpose as described in this instruction manual. The Warnings

and Important Safety Instructions in this manual do not cover all possible conditions and situations that may

occur. It is your responsibility to use common sense, caution, and care when installing, maintaining, or operating

your dryer.

Always contact your manufacturer about problems or conditions you do not understand.

Important safety symbols and precautions

WARNING: Hazards or unsafe practices that may result in severe physical injury, death and/or

property damage.

Follow the information in this manual to minimize the risk of ﬁre or explosion or to prevent property

damage, personal injury, or death.

CAUTION: Hazards or unsafe practices that may result in physical injury and/or property damage.

NOTE

These warning signs are here to prevent injury to you and others.

Please follow them explicitly.

After reading this section, keep it in a safe place for future reference.

DV5000H_03381A-08_EN+CFR+MES.indb 4 8/16/2016 1:47:48 PM

English - 5

01 SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS

WARNING - GAS APPLIANCES

• State of California Proposition 65 Warning (US only)

This product contains chemicals known to the State of California to cause cancer and birth defects or other

reproductive harm.

• Gas appliances can cause low-level exposure to Proposition 65 listed substances, including but not

limited to, benzene, carbon monoxide, formaldehyde and soot, substances resulting from the incomplete

combustion of natural gas or LP fuels.

WARNING - RISK OF FIRE

• Clothes dryer installation must be performed by a qualiﬁed installer.

• Install the clothes dryer according to the manufacturer’s instructions and local codes.

• Do not install a clothes dryer with ﬂexible plastic venting materials. If ﬂexible metal (foil type) duct is

installed, it must be of a speciﬁc type identiﬁed by the appliance manufacturer as suitable for use with

clothes dryers. Flexible venting materials are known to collapse, be easily crushed, and trap lint. These

conditions will obstruct clothes dryer airﬂow and increase the risk of ﬁre.

• To reduce the risk of severe injury or death, follow all installation instructions.

TO REDUCE THE RISK OF FIRE OR EXPLOSION:

• Do not dry items that have been previously cleaned, washed, soaked, or spotted with gasoline, dry cleaning

solvents, or other ﬂammable or explosive substances. They emit vapors that could ignite or explode. Any

material that has been in contact with a cleaning solvent or ﬂammable liquids or solids should not be placed

in the dryer until all traces of these ﬂammable liquids or solids and their fumes have been removed.

There are many highly ﬂammable items used in homes, such as acetone, denatured alcohol, gasoline,

kerosene, some liquid household cleaners, some spot removers, turpentine, waxes, and wax removers.

• Do not dry items containing foam rubber (may be labeled latex foam) or similarly textured rubber-like

materials on a heat setting. Heated foam rubber materials can, under certain circumstances, produce ﬁre by

spontaneous combustion.

WHAT TO DO IF YOU SMELL GAS:

• Do not try to light any appliance.

• Do not turn on the appliance.

• Do not touch any electrical switch.

• Do not use any phone in your building.

• Clear the room, building or area of all occupants.

• Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions.

• If you cannot reach your gas supplier, call the ﬁre department.

• Installation and service must be performed by a qualiﬁed installer, service agency, or the gas supplier.

DV5000H_03381A-08_EN+CFR+MES.indb 5 8/16/2016 1:47:48 PM

English - 6

SAVE THESE INSTRUCTIONS

Important safety instructions

WARNING

To reduce the risk of re, electric shock, or injury to persons when using your appliance, follow basic

precautions, including the following:

1. Read all instructions before using this appliance.

2. Do not use the dryer to dry clothes which have traces of any ﬂammable substance, such as vegetable oil,

cooking oil, machine oil, ﬂammable chemicals, thinner, etc., or anything containing wax or chemicals, such as

mops and cleaning cloths. Flammable substances may cause the fabric to catch ﬁre by itself.

3. Do not store or use gasoline or other ﬂammable vapors and liquids near this or any other appliance.

4. Do not allow children or pets to play on, in, or in front of the appliance. Close supervision is necessary when

the appliance is used near children and pets.

5. Before the appliance is removed from service or discarded, remove the door to the drying compartment to

prevent children or animals from becoming trapped inside.

6. Do not reach into the appliance when the drum is moving.

7. Do not install or store this appliance where it will be exposed to the weather.

8. Do not temper with the internal controls.

9. Do not repair or replace any part of the appliance or attempt any servicing unless speciﬁcally recommended

in the user-maintenance instructions or published in the user-repair instructions that you understand and

have the skills to carry out.

10. Do not use fabric softeners or products to eliminate static unless recommended by the manufacturer of the

fabric softener or product.

11. Clean the lint screen before or after each load.

12. Do not use heat to dry articles containing foam rubber or similarly textured rubber-like materials.

13. Keep the area around the exhaust opening and surrounding areas free from lint, dust, and dirt.

14. The interior of the dryer and exhaust duct should be cleaned periodically by qualiﬁed service personnel.

15. Do not place items exposed to cooking oils in your dryer. Items contaminated with cooking oils may

contribute to a chemical reaction that could cause a load to catch ﬁre.

16. This appliance must be grounded. See “Electrical requirements” and “Grounding” in the “Installing your dryer”

section.

17. This appliance must be properly grounded. Never plug the power cord into a receptacle that is not grounded

adequately and in accordance with local and national codes. Refer to installation instructions for grounding

this appliance.

18. Ensure pockets are free from small irregularly shaped hard objects and foreign material, i.e. coins, knives, pins,

etc. These objects could damage your dryer.

19. Gas leaks may occur in your system, resulting in a dangerous situation.

20. Gas leaks may not be detected by smell alone.

21. Gas suppliers recommend you purchase and install a UL-approved gas detector.

22. Control board and inlet valve are intentionally not grounded and may present a risk of electric shock only

during servicing. Service personnel - do not contact this part while appliance is energized.

DV5000H_03381A-08_EN+CFR+MES.indb 6 8/16/2016 1:47:48 PM

English - 7

01 SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS

CAUTION

1. Do not sit on top of the dryer.

2. Because of continuing product improvements, Samsung reserves the right to change speciﬁcations without

notice. For complete details, see the Installation Instructions packed with your product before selecting

cabinetry, making cutouts, or beginning installation.

3. Do not wash clothing with large buckles, buttons, or other heavy metal or solid things.

4. Install and use in accordance with the manufacturer’s instructions.

5. All washed and unwashed fabrics that contain vegetable oil or cooking oil can be dangerous. Washing these

items in hot water with extra detergent will reduce, but not eliminate, the hazard. Always use the Cool Down

cycle for these items to reduce their temperature. Never remove these items from the dryer hot or interrupt

the drying cycle until the items have run through the Cool Down cycle. Never pile or stack these items when

they are hot.

6. Take care that children’s ﬁngers are not caught in the door when closing it. This may result in injury.

DV5000H_03381A-08_EN+CFR+MES.indb 7 8/16/2016 1:47:48 PM

English - 8

Installing your dryer

Unpacking your dryer

Unpack your Dryer and inspect it for shipping damage. Make sure you have received all the items shown below. If

your Dryer was damaged during shipping, or you do not have all the items, contact 1-800-SAMSUNG (726-7864).

WARNING

• The packing materials can be dangerous to children. Keep all packaging material (plastic bags,

polystyrene, etc.) well out of the reach of children.

• To prevent personal injury or strain, wear protective gloves whenever lifting or carrying the unit.

What’s included

5

6

1

2

4

3

1 Top cover 4 Filter

2 Control panel 5 Water Inlet (Steam model only)

3 Door 6 Duct Exhaust

Accessories (Steam model only)

“Y”-connector Short inlet hose Long inlet hose

DV5000H_03381A-08_EN+CFR+MES.indb 8 8/16/2016 1:47:49 PM

English - 9

02 INSTALLATION

Important to installer

Please read the following instructions carefully before installing the dryer. These instructions should be kept for

future reference.

WARNING: Remove the door from all discarded appliances to avoid the danger of a child being trapped

and suﬀocating.

Basic requirements

Make sure you have everything necessary for the proper installation

• A GROUNDED ELECTRICAL OUTLET is required.

• A POWER CORD electric dryer (except for Canada).

• GAS LINES (if a gas dryer) must meet national and local codes.

• The EXHAUST SYSTEM must be made of rigid metal or ﬂexible stiﬀ-walled metal exhaust ducting.

Grounding

This dryer must be grounded. In the event of a malfunction or breakdown, grounding the product will reduce the

risk of electrical shock by providing a path of least resistance for the electrical current.

Gas models

Your dryer has a cord with an equipment-grounding conductor and a grounding plug.

• The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance

with all local codes and ordinances.

• Do not modify the plug provided with your dryer – if it doesn’t ﬁt the outlet, have a proper outlet installed by

a qualiﬁed electrician.

• Never connect the ground wire to the plastic plumbing lines, gas lines, or hot water pipes.

Electric models

Your dryer has an optional cord with an equipment-grounding conductor and a grounding plug, which is sold

separately.

• The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance

with all local codes and ordinances.

• Do not modify the plug provided with your dryer – if it doesn’t ﬁt the outlet, have a proper outlet installed by

a qualiﬁed electrician.

• If a power cord is not used and the electric dryer is to be permanently wired, the dryer must be connected to

a permanently grounded metal wiring system, or an equipment grounding conductor must be run with the

circuit conductors and connected to the equipment grounding terminal or lead on the dryer.

DV5000H_03381A-08_EN+CFR+MES.indb 9 8/16/2016 1:47:49 PM

English - 10

Location considerations

The dryer should be located where there is enough space at the front for loading the dryer, and enough space

behind for the exhaust system. This dryer is factory-ready for the rear exhaust option. To exhaust out the bottom,

right or the left, use the accessory exhaust kit. Instructions are included with the kit. Make sure the room in which

the dryer is located has enough fresh air. The dryer must be located where there are no air-ﬂow obstructions.

For gas dryers, adequate clearance must be maintained as noted on the data plate to ensure adequate air for

combustion and the proper dryer operation.

The dryer must not be installed or stored in an area where it will be exposed to water and/or weather. The dryer

area must be kept clear of combustible materials, gasoline, and other ﬂammable vapors and liquids. A dryer

produces combustible lint. The area around the dryer should be kept lint-free.

Alcove or closet installations

WARNING

• The dryer must be exhausted to the outside to reduce the risk of ﬁre when installed in an alcove or closet.

• No other fuel-burning appliance should be installed in the same closet as the dryer.

Minimum clearances between the dryer and adjacent walls or other surfaces:

Sides 1 in (25 mm) Rear 5.9 in (150 mm)

Top 17 in (432 mm) Closet front 2 in (51 mm)

A

AA

BB

FDE

C

A 1 in. (25 mm)

B 27 in. (686 mm)

C 17 in. (432 mm)

D 2 in. (50 mm)

E 32.4 in. (823 mm)

F 5 in. (127 mm)

Recessed area

Side view

(closet or conﬁned area)

Undercounter installation

A

B C D

A 39 in. (991 mm)

B 1 in. (25 mm)

C 27 in. (686 mm)

D 1 in. (25 mm)

DV5000H_03381A-08_EN+CFR+MES.indb 10 8/16/2016 1:47:49 PM

English - 11

02 INSTALLATION

Installation with pedestal

A

B

C

EF

D

A 38.7 in. (984 mm)

B 53.3 in. (1355 mm)

C 27 in. (686 mm)

D

53 in. (1345 mm) to

clear open door

E 32.4 in. (823 mm)

F 5 in. (127 mm)

Installation with stacked washing machine and dryer

A

E

I

F

GH JKL

B

C

D

A 3 in. (76 mm)

B 48 in.² (3100 mm²)

C 24 in.² (1550 mm²)

D 3 in. (76 mm)

E 6 in. (152 mm) *

F 77.5 in. (1968 mm)

G 1 in. (25 mm)

H 27 in. (686 mm)

I 5 in. (127 mm)

J 1 in. (25 mm)

K 32.4 in. (823 mm)

L 8 in. (203 mm)

The front of the closet must have two unobstructed air openings (B, C) for a combined minimum total

area of 72 in² (465 cm²) with a minimum clearance of 3 in. (7.6 cm) at the top (A) and bottom (D).

External exhaust elbow requires additional space (L).

Stacking (MODEL NO: SK-5A)

Samsung’s Washer and Dryer can be stacked to maximize usable space.

The dryer legs need to be removed to stack the Washer and Dryer. You can purchase an optional stacking

kit from your Samsung retailer.

DV5000H_03381A-08_EN+CFR+MES.indb 11 8/16/2016 1:47:50 PM

English - 12

Ducting requirements

No. of 90° elbows

Weather hood type

4” (10 .16 cm) 2.5” (6.35 cm)

Recommended Use only for short-run installation

Rigid Metallic Flexible* Rigid Metallic Flexible*

0 24.4 m (80 ft.) 12.4 m (41 ft.) 22.6 m (74 ft.) 10.1 m (33 ft.)

1 20.7 m (68 ft.) 11.2 m (37 ft.) 18.9 m (62 ft.) 8.8 m (29 ft.)

2 17.4 m (57 ft.) 10.1 m (33 ft.) 15.5 m (51 ft.) 7.6 m (25 ft.)

3 14.3 m (47 ft.) 9.0 m (29 ft.) 12.5 m (41 ft.) 6.5 m (21 ft.)

* Do not use non-metallic ﬂexible ducts.

• Use a 4 inch (10.2 cm) diameter rigid aluminum or rigid galvanized steel duct.

• Do not use a smaller duct.

• Ducts larger than 4 inches (10.2 cm) in diameter can result in increased accumulation of lint.

• Lint should be removed regularly.

• If a ﬂexible metal duct must be used, use the type with a stiﬀ sheet metal wall. Do not use a ﬂexible duct with

a thin foil wall. A serious blockage can result if the ﬂexible metal duct is bent too sharply.

• Never install any type of ﬂexible duct in walls, ceilings, or other concealed spaces.

• Keep the exhaust duct as straight and short as possible.

• Secure joints with duct tape. Do not use screws.

• Plastic ﬂexible ducts can kink, sag, be punctured, reduce airﬂow, extend drying times, and aﬀect the dryer

operation.

• Exhaust systems longer than recommended can extend drying times, aﬀect machine operations, and collect

lint.

• The exhaust duct should end with an exhaust hood with a swing-out damper to prevent back drafts and

entry of wildlife. Never use an exhaust hood with a magnetic damper.

• The hood should have at least 12 inches (30.5 cm) of clearance between the bottom of the hood and the

ground or other obstruction. The hood opening should point down.

• Never install a screen over the exhaust outlet.

• To avoid lint buildup, do not exhaust the dryer directly into a window well. Do not exhaust under a house or

porch.

• If the exhaust duct must run through an unheated area, the duct should be insulated and slope slightly down

towards the exhaust hood to reduce condensation and lint buildup.

• Inspect and clean the interior of the exhaust system at least once a year. Unplug the power cord before

cleaning.

• Check frequently to make sure the exhaust hood damper opens and closes freely.

• Check once per month, and clean at least once per year. Note: If your clothes are not getting dry, then check

the duct for obstructions.

• Do not exhaust the dryer into a wall, ceiling, crawl space, or concealed space of a building, gas vent, or any

other common duct or chimney. This could create a ﬁre hazard from the lint expelled by the dryer.

DV5000H_03381A-08_EN+CFR+MES.indb 12 8/16/2016 1:47:50 PM

English - 13

02 INSTALLATION

If the new dryer is installed into an existing exhaust system you must make sure:

• The exhaust system meets all local, state, and national codes.

• That a ﬂexible plastic duct is not used.

• To inspect and clean all lint buildup from inside the existing duct.

• The duct is not dented or crushed.

• The exhaust hood damper opens and closes freely.

• The static pressure in any exhaust system must not exceed 0.83 inches of water column, or be less than 0.

• This can be measured with the dryer running with a manometer at the point where the exhaust duct connects

to the dryer. A no-heat setting should be used. The dryer tumbler should be empty and the lint ﬁlter clean.

Exhausting

The dryer shall not be exhausted into a chimney, a wall, a ceiling, an attic, a crawl space, or a concealed space of a

building.

Exhausting the dryer to the outside will prevent large amounts of lint and moisture from being blown into the

room.

• All dryers must be exhausted to the outside.

• Do not assemble the duct with screws or other fastening means that extend into the duct and catch

lint.

• The exhaust duct should be 4 inches (102 mm) in diameter.

• The total length of ﬂexible metal duct shall not exceed 2.4 m (7.8 ft.).

In the United States:

Use only those foil-type ﬂexible ducts, if any, speciﬁcally identiﬁed for use with the appliance by the manufacturer

and that comply with the Outline for Clothes Dryer Transition Ducts, Subject 2158A.

In Canada:

Use only those foil-type ﬂexible ducts, if any, speciﬁcally identiﬁed for use with the appliance by the manufacturer.

Outside the U.S. and Canada:

Refer to the local codes.

WARNING

• The dryer must be exhausted to the outside to reduce the risk of ﬁre when installed in an alcove or

closet.

• NEVER USE A PLASTIC OR NON-METAL FLEXIBLE DUCT.

If your existing ductwork is plastic, non-metal, or combustible, replace it with metal.

Use only a metal exhaust duct that is non-ﬂammable to ensure containment of the exhaust air, heat,

and lint.

DV5000H_03381A-08_EN+CFR+MES.indb 13 8/16/2016 1:47:50 PM

English - 14

Dryer exhaust tips

WARNING: A plastic or non-metal ﬂexible duct presents a potential ﬁre hazard.

• Make sure your dryer is installed properly so it exhausts air easily.

• Use a 4” diameter rigid metal duct. Tape all joints, including at the dryer.

Never use lint-trapping screws.

• Keep ducts as straight as possible.

• Clean all old ducts before installing your new dryer.

• Be sure the vent ﬂap opens and closes freely.

• Inspect and clean the exhaust system annually.

4”

Tape

Don’t let a poor exhaust system slow the drying process by:

• Restricting your dryer with a poor exhaust system.

• Using a plastic, thin foil, or non-metal ﬂexible duct.

• Unnecessarily using long ducts that have many elbows.

• Allowing dented or clogged ducts and vent.

DV5000H_03381A-08_EN+CFR+MES.indb 14 8/16/2016 1:47:50 PM

English - 15

02 INSTALLATION

Gas requirements

THE INSTALLATION MUST CONFORM WITH LOCAL CODES, OR IN THE ABSENCE OF LOCAL CODES, WITH

THE NATIONAL FUEL GAS CODE ANSI/Z223.1, LATEST REVISION (FOR THE UNITED STATES), OR WITH THE

CAN/CGA-B149 INSTALLATION CODES (FOR CANADA).

• Use only natural or LP (liquid propane) gases.

• This dryer designed for use with natural gas. If you plan to use your dryer with LP gas (liquid propane), the

conversion must be done by a qualiﬁed service technician in order to achieve safe and proper performance.

• A 1/2 inch (1.27 cm) gas supply line is recommended and must be reduced to connect to the 3/8 inch (1 cm)

gas line on your dryer. The National Fuel Gas Code requires that an accessible, approved manual gas shut-oﬀ

valve be installed within 6 inches of your dryer.

• Gas dryers installed in residential garages must be raised 18 inches (46 cm) above the oor.

• Additionally, a 1/8 inch (0.3 cm) N.P.T. (National Pipe Thread) plugged tapping, accessible for test gauge

connection, must be installed immediately upstream of your dryer’s gas supply connection.

• Your dryer must be disconnected from the gas supply pipe system during any pressure testing of the system.

• DO NOT reuse old ﬂexible metal gas lines. Flexible gas lines must be design certiﬁed by the American Gas

Association (CGA in Canada).

• Any pipe joint compound used must be resistant to the action of any liqueﬁed petroleum gas.

• As a courtesy, most local gas utilities will inspect a gas appliance installation.

• GAS IGNITION - Your dryer uses an automatic ignition system to ignite the burner. There is no constant

burning pilot.

Commonwealth of massachusetts installation instructions

Your dryer must be installed by a licensed plumber or gas ﬁtter. A “T” handle manual gas valve must be installed in

the gas supply line to your dryer. If a ﬂexible gas connector is used to install your dryer, the connector may not be

longer than 3 feet (36 inches).

WARNING

• Gas leaks may occur in your system, creating a dangerous situation.

• Gas leaks may not be detected by smell alone.

• Gas suppliers recommend that you purchase and install a UL-approved gas detector.

• Install and use it in accordance with the manufacturer’s instructions.

Vent blockage test

After the dryer is installed, start the Vent Blockage Test to check if the duct system is properly installed. The Vent

Blockage Test automatically detects the status of the ducts and reports any blockage or problems. Proper ducting

can reduce drying time and save energy.

The Vent Blockage Test must run with the dryer in a cool state. If the dryer warms up after the installation

check, run the AIR FLUFF cycle for several minutes to reduce its internal temperature.

Running the vent blockage test

1. Make sure the drum is empty, and then close the door.

(If there are any clothes or other items in the drum, the test will not give accurate results.)

2. Press the POWER button to turn the dryer on, then simultaneously press and hold the Adjust Time and

Dry level buttons for 3 seconds. “In” appears in the dryer’s display. (If you have started other procedures

before the Vent Blockage Test, the dryer will not enter the Vent Blockage Test mode.)

DV5000H_03381A-08_EN+CFR+MES.indb 15 8/16/2016 1:47:51 PM

English - 16

3. Press the START/PAUSE button. The Vent Blockage Test starts immediately. During the test, the number

indicator makes a circle in 6 clockwise steps. The test takes about 2 minutes. Do not open the door during the

test.

4. After 2 minutes, when the test is complete, the results is displayed and the dryer sounds a tone.

If status of the duct system is normal, “0” appears and the dryer sounds a completion tone.

If the duct system can not exhaust properly, “Cg” appears and the dryer sounds an alarm tone.

If there are any other problems, an information code appears in the display. For information about the code,

see Information codes section on page 37.

• To stop or cancel the Vent Blockage Test, press the POWER button to turn oﬀ your dryer.

• During the test, if “dc” appears in the display, make sure the door is closed. If “C1” is displayed, see if there

is laundry inside drum. If there is, stop the test and remove it. Then, start the test again.

• The results remain on the display for about 5 minutes and then automatically turn oﬀ. You can turn the

result oﬀ immediately by pressing the POWER button.

• During or after the test, the internal drum is hot. Use caution to prevent burns.

The Vent Blockage Test is used to check for problems to the current duct system when the dryer is

installed for the ﬁrst time.

• If the test result displays “Cg” (the duct system is blocked ), refer to the “Ducting requirements”

section on page 12 and the “Exhaust ducting guide” section below, and then take proper measures

to correct any problems.

If the test is suspended, it could result in incorrect results. Follow the proper procedures when testing

the dryer.

• Even if the test result is normal (“0”), the duct system could be blocked slightly. Properly install all duct

work according to the installation instructions in this manual.

Exhaust ducting guide

Ducting

1. Make sure the dryer is installed properly so the air exhausts freely.

2. Use 4-inch rigid metal ducts. Tape all joints including the dryer connection.

Never use lint-trapping screws.

3. To facilitate the exhaust, keep the ducts as straight as possible.

Cleaning

Clean all old ducts before installing the dryer, and make sure the vent ﬂap opens and closes freely. We recommend

that you clean the exhaust system annually or on a regular basis.

WARNING

• To prevent ﬁre, do not use plastic, thin-foil, or non-metal ﬂexible ducts of any kind.

• Do not use a poor exhaust system because it slows down the dryer’s performance.

• Do not use excessively long ducts that have multiple elbows.

• Do not use crushed or clogged venting or ducts.

DV5000H_03381A-08_EN+CFR+MES.indb 16 8/16/2016 1:47:51 PM

English - 17

02 INSTALLATION

Electrical requirements

The wiring diagram is located on the plate below the control panel.

WARNING

• The improper connection of the equipment grounding conductor can result in a risk of electric

shock. Check with a qualiﬁed electrician or serviceman if you are in doubt as to whether your dryer is

properly grounded. Do not modify the plug provided with your dryer - if it doesn’t ﬁt the outlet, have

a proper outlet installed by a qualiﬁed electrician.

• To prevent unnecessary risk of ﬁre, electrical shock, or personal injury, all wiring and grounding must

be done in accordance with local codes, or in the absence of local codes, with the National Electrical

Code, ANSI/NFPA No. 70-Latest Revision (for the U.S.) or the Canadian Electrical Code CSA C22.1 -

Latest Revisions and local codes and ordinances. It is your responsibility to provide adequate electrical

services for your dryer.

• All gas installations must be done in accordance with the national Fuel Code ANSI/Z2231 - Latest

Revision (for the U.S.) or CAN/CGA - B149 Installation Codes - Latest Revision (for Canada) and local

codes and ordinances.

Electrical connections

Before operating or testing, follow all grounding instructions in the “Grounding” section on page 13.

An individual branch (or separate) circuit serving only your dryer is recommended. DO NOT USE AN EXTENSION

CORD.

Gas models – U.S. and Canada

A 120 volt, 60 Hz AC approved electrical service, with a 15-ampere fuse or circuit breaker is required.

Electric models – U.S. only

Most U.S. dryers require a 120/240 volt, 60 Hz AC approved electrical service. Some require 120/208 volt, 60 Hz

approved electrical service. The electric service requirements can be found on the data label located behind the

door. A 30-ampere fuse or circuit breaker on both sides of the line is required.

If a power cord is used, the cord should be plugged into a 30-ampere receptacle.

The power cord is NOT provided with U.S. electric model dryers.

WARNING - RISK OF ELECTRIC SHOCK

When local codes allow, the electrical supply of the dryer may be connected by means of a new power

supply cord kit, marked for use with a dryer, that is U.L. listed and rated at a minimum of120/240 volts,

30-ampere with three No. 10 copper wire conductors terminated with closed loop terminals, open-end

spade lugs with turned up ends, or with tinned leads.

• Do not reuse a power supply cord from an old dryer. The power cord electric supply wiring must be

retained at the dryer cabinet with a suitable UL-listed strain relief.

• Grounding through the neutral conductor is prohibited for (1) new branch-circuit installations, (2)

mobile homes, (3) recreational vehicles, and (4) areas where local codes prohibit grounding through

the neutral conductor. (Use a 4-prong plug for 4 wire receptacles, NEMA type 14-30R.)

Electric models – Canada Only

• A 120/240 volt, 60 Hz AC approved electrical service fused through a 30-ampere fuse or circuit breaker on

both sides of the line is required.

• All Canadian models are shipped with the power cord attached. The power cord should be plugged into a

30-ampere receptacle.

In Canada, you may not convert a dryer to 208 volts.

DV5000H_03381A-08_EN+CFR+MES.indb 17 8/16/2016 1:47:51 PM

English - 18

3-WIRE system connections

1. Loosen or remove the center terminal block screw.

2. Connect the neutral wire (white or center wire) of the power cord to the center, silver-colored terminal screw

of the terminal block. Tighten the screw.

3. Connect the other wires to the outer terminal block screws. Tighten the screws.

4. Tighten the strain relief screws.

5. Insert the tab of the terminal block cover into your dryer’s rear panel slot.

6. Secure the cover with a hold-down screw.

A External ground connector

B Neutral grounding wire (white or green/yellow)

C Center silver-colored terminal block screw

D Neutral wire (white or center wire)

E 3/4 in. (1.9 cm) UL-listed strain relief

If converting from a 4-wire electrical system to a 3-wire, the ground strap must be reconnected to the

terminal block support to ground the dryer frame to the neutral conductor.

4-WIRE system connections

1. Remove the center terminal block screw.

2. Connect the ground wire (green or unwrapped) of the power cord to the external ground conductor screw.

3. Connect the neutral wire (white or center wire) of the power cord and the appliance ground wire (white or

green/yellow stripes) under the central screw of the terminal block.

4. Connect the other wires to the outer terminal block screws. Tighten the screws.

5. Tighten the strain relief screws.

6. Insert the tab of the terminal block cover into your dryer’s rear panel slot.

7. Secure the cover with a hold-down screw.

A External ground connector

B Green or bare copper wire of the power cord

C 3/4 in. (1.9 cm) UL-listed strain relief

D Center silver-colored terminal block screw

E Neutral grounding wire (white or green/yellow)

F Neutral wire (white or center wire)

8. With a level, check your dryer and make the necessary adjustments to the leveling legs.

9. At this time, make sure all gas connections (on gas models), exhaust and electrical connections are complete.

Plug in your dryer, and check its operation by using the checklist below.

10. (GAS MODELS ONLY)

The burner may not ignite initially due to air in the gas line. Allowing your dryer to operate on a heat setting

will purge the line. If the gas does not ignite within 5 minutes, turn your dryer oﬀ and wait 5 minutes. Be sure

the gas supply to your dryer has been turned on. In order to conﬁrm the gas ignition, check the exhaust for

heat.

DV5000H_03381A-08_EN+CFR+MES.indb 18 8/16/2016 1:47:51 PM

English - 19

02 INSTALLATION

Connecting the inlet hose (Steam model only)

The dryer must be connected to the cold water faucet using the new inlet hoses. Do not use old hoses.

1. Turn the cold water faucet oﬀ.

2. Attach the brass female end of the Y connector (A) to the cold water

faucet.

3. Attach the straight end of long hose (B) to the Y connector.

4. Using pliers, tighten the coupling with an additional two-thirds turn.

A

B

If the Y connector cannot be attached directly to the cold water

faucet, the short hose must be used.

(If space permits, please skip steps 5 to 8, and go directly to step 9.)

5. Attach the short inlet hose (C) to the cold water faucet.

Screw on the coupling by hand until it is seated on the faucet.

6. Using the pliers, tighten the coupling with an additional two-thirds

turn.

7. Attach the Y connector (A) to the brass male end of the small hose.

Screw on the coupling by hand until it is seated on the connector.

8. Using the pliers, tighten the coupling with an additional two-thirds

turn.

C

A

9. Attach the angled end of long hoses to the ﬁll valve at the bottom of

the dryer rear frame. Screw on the coupling by hand until it is seated

on the ﬁll valve connector.

10. Using pliers, tighten the coupling with an additional two-thirds turn.

11. Attach the washer hose (D) to the other side of the Y connector (A).

Screw on the hose coupling until it is tight. Using pliers, tighten the

coupling with an additional two thirds turn.

12. Check that the water faucets are on.

13. Check for leaks around the Y connector, faucets and hoses.

D

A

When you tighten the coupling with pliers, do not overtighten. This may damage the coupling.

DV5000H_03381A-08_EN+CFR+MES.indb 19 8/16/2016 1:47:51 PM

English - 20

Replacement parts and accessories

If your dryer requires replacement parts or accessories, contact the dealer where you purchased your dryer or the

SAMSUNG customer care center at 1-800-SAMSUNG (726-7864).

Installation

For the proper installation, we recommend that you hire a qualied installer.

1. Move your dryer to an appropriate location for the installation.

Consider installing the dryer and washer side-by-side, to allow access

to the gas, electrical, and exhaust connections. Place two of the carton

cushion-tops on the ﬂoor. Tip your dryer on its side so it lies across

both cushion-tops.

2. Set your dryer back in an upright position.

3. To ensure that the dryer provides the optimal drying performance, it

must be level. To minimize vibrations, noise, and unwanted movement,

the ﬂoor must be a perfectly level, solid surface.

To set the dryer to the same height as the washer, fully retract the

leveling feet (A) by turning them counterclockwise, then loosen the

legs by turning them clockwise.

Adjust the leveling feet only as much as necessary to level the

dryer. Extending the leveling feet more than necessary can

cause the dryer to vibrate.

A

4. Review the “Exhausting” section on page 13 before installing the exhaust system.

Install the ductwork from your dryer to the exhaust hood. The crimped end of the duct sections must point

away from your dryer.

• DO NOT use sheet metal screws when assembling the ducting. These joints should be taped.

• Never use plastic ﬂexible exhaust material.

• Tip for tight installations: install a section of the exhaust system onto your dryer before putting it in place.

• Use duct tape to secure this section to your dryer, but do not cover the ventilation slots at the back of

the unit in dryer cabinet.

5. Review the “Electrical requirements” section on page 17.

BEFORE OPERATING OR TESTING, follow the grounding instructions in the “Grounding” section on page 9.

WARNING - U.S. MODELS

RISK OF ELECTRIC SHOCK - All U.S. models are produced for a 3-WIRE SYSTEM CONNECTION.

The dryer frame is grounded to the neutral conductor at the terminal block.

A 4-WIRE SYSTEM CONNECTION is required for new or remodeled construction, mobile homes, or if

local codes do not permit grounding through the neutral conductor. If the 4-wire system is used, the

dryer frame cannot be grounded to the neutral conductor at the terminal block.

Refer to the following instructions for “Electrical connections” on page 17.

Remove the terminal block cover plate.

Insert the power cord with a UL-listed strain relief through the hole provided in the cabinet near the terminal

block.

A strain relief must be used.

Do not loosen the nuts already installed on the terminal block. Be sure they are tight.

Use a 3/8 in. (1 cm) deep well socket.

DV5000H_03381A-08_EN+CFR+MES.indb 20 8/16/2016 1:47:52 PM

La page charge ...

Samsung DV42H5400EF/A3 Manuel utilisateur

Samsung DV42H5400EF/A3 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents