Bose SoundLink Revolve II Bluetooth® Le manuel du propriétaire

SOUNDLINK REVOLVE II

IMPORTANT SAFETY INSTRUCTIONS

2

|

ENG

Please read and keep all safety, security, and use instructions.

Bose Corporation hereby declares that this product is in compliance with the essential requirements and

other relevant provisions of Directive 2014/53/EU and all other applicable EU directive requirements. The

complete declaration of conformity can be found at: www.Bose.com/compliance

Important Safety Instructions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including

ampliﬁers) that produce heat.

6. Only use attachments/accessories speciﬁed by the manufacturer.

7. Unplug this apparatus during lightning storms or when unused for long periods of time.

8. Refer all servicing to qualiﬁed personnel. Servicing is required when the apparatus has been damaged in any

way, such as power-supply cord or plug is damaged, objects have fallen into the apparatus, does not operate

normally, or has been dropped.

WARNINGS/CAUTIONS

This symbol means there is uninsulated, dangerous voltage within the product enclosure that may constitute

a risk of electrical shock.

This symbol means there are important operating and maintenance instructions in this guide.

This product contains magnetic material. Consult your physician on whether this might aect your

implantable medical device.

• Keep the product away from ﬁre and heat sources. Do NOT place naked ﬂame sources, such as lighted candles, on

or near the product.

• Do NOT make unauthorized alterations to this product.

• Do NOT use a power inverter with this product.

• Use this product only with an agency-approved LPS power supply that meets local regulatory requirements (e.g.,

UL, CSA, VDE, CCC).

• Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain

readily operable.

• Do not expose products containing batteries to excessive heat (e.g. from storage in direct sunlight, ﬁre or the like).

• The product label is located on the bottom of the product.

3

|

ENG

REGULATORY AND LEGAL INFORMATION

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment o and on, the user

is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Changes or modiﬁcations not expressly approved by Bose Corporation could void the user’s authority to operate this

equipment.

This device complies with part 15 of the FCC Rules and with ISED Canada license-exempt RSS standard(s). Operation

is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may cause undesired operation.

This device complies with FCC and ISED Canada radiation exposure limits set forth for general population.

This equipment should be installed and operated with a minimum distance of 20 cm between radiator and your body.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Meets IMDA Requirements.

CAN ICES-3(B)/NMB-3(B)

Management Regulation for Low-power Radio-frequency Devices

Article XII

According to “Management Regulation for Low-power Radio-frequency Devices” without permission granted by

the NCC, any company, enterprise, or user is not allowed to change frequency, enhance transmitting power or alter

original characteristic as well as performance to an approved low power radio-frequency devices.

Article XIV

The low power radio-frequency devices shall not inﬂuence aircraft security and interfere legal communications; If

found, the user shall cease operating immediately until no interference is achieved. The said legal communications

means radio communications operated in compliance with the Telecommunications Act.

The low power radio-frequency devices must be susceptible with the interference from legal communications or ISM

radio wave radiated devices.

DON’T attempt to remove the rechargeable lithium-ion battery from this product. Contact your local Bose retailer or

other qualiﬁed professional for removal.

Please dispose of used batteries properly, following local regulations. Do not incinerate.

This symbol means the product must not be discarded as household waste, and should be delivered to an

appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources,

human health and the environment. For more information on disposal and recycling of this product, contact

your local municipality, disposal service, or the shop where you bought this product.

Removal of the rechargeable lithium-ion battery in this product should be conducted only by a qualiﬁed

professional. Please contact your local Bose retailer or see products.bose.com/static/compliance/index.html

for further information.

REGULATORY AND LEGAL INFORMATION

4

|

ENG

The product, in accordance with the Ecodesign Requirements for Energy Related Products Directive 2009/125/EC, is

in compliance with the following norm(s) or document(s): Regulation (EC) No. 1275/2008, as amended by Regulation

(EU) No. 801/2013.

Required Power State Information

Power Modes

Standby Networked Standby

Power consumption in speciﬁed power mode, at

230V/50Hz input

≤

0.5 W Bluetooth®

≤ 2.0 W

Time after which equipment is automatically switched

into mode

≤

20 minutes

≤

5 minutes

Power consumption in networked standby if all wired

network ports are connected and all wireless network

ports are activated, at 230V/50Hz input

N/A

≤

2.0 W

Network port deactivation/activation procedures.

Deactivating all networks will enable standby mode.

Bluetooth: Deactivate by clearing the pairing list by pressing and

holding the Bluetooth button for 10 seconds. Activate by pairing with

a Bluetooth source.

For Europe:

Frequency band of operation 2400 to 2483.5 MHz.

Maximum transmit power less than 20 dBm EIRP.

Maximum transmit power is below regulatory limits such that SAR testing is not necessary and exempt per

applicable regulations.

China Restriction of Hazardous Substances Table

Names and Contents of Toxic or Hazardous Substances or Elements

Toxic or Hazardous Substances and Elements

Part Name

Lead

(Pb)

Mercury

(Hg)

Cadmium

(Cd)

Hexavalent

(CR(VI))

Polybrominated

Biphenyl

(PBB)

Polybrominated

diphenylether

(PBDE)

PCBs X O O O O O

Metal Parts X O O O O O

Plastic Parts O O O O O O

Speakers X O O O O O

Cables X O O O O O

This table is prepared in accordance with the provisions of SJ/T 11364.

O: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part

is below the limit requirement of GB/T 26572.

X: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials

used for this part is above the limit requirement of GB/T 26572.

REGULATORY AND LEGAL INFORMATION

5

|

ENG

Taiwan Restriction of Hazardous Substances Table

Equipment name: Bose SoundLink Revolve II, Type designation: 419357

Restricted substances and its chemical symbols

Unit

Lead

(Pb)

Mercury (Hg) Cadmium (Cd)

Hexavalent

chromium (Cr+6)

Polybrominated

biphenyls (PBB)

Polybrominated

diphenyl ethers

(PBDE)

PCBs

- ○ ○ ○ ○ ○

Metal Parts

- ○ ○ ○ ○ ○

Plastic Parts

○ ○ ○ ○ ○ ○

Speakers

- ○ ○ ○ ○ ○

Cables

- ○ ○ ○ ○ ○

Note 1:

“○” indicates that the percentage content of the restricted substance does not exceed the percentage of reference value

of presence.

Note 2: The “−” indicates that the restricted substance corresponds to the exemption.

Please complete and retain for your records

The serial and model numbers are located bottom of the speaker.

Serial number: ____________________________________________________________________

Model number: 419357

Please keep your receipt with your owner’s guide. Now is a good time to register your Bose product.

You can easily do this by going to global.Bose.com/register

Date of Manufacture: The eighth digit in the serial number indicates the year of manufacture; “0” is 2010 or 2020.

China Importer

: Bose Electronics (Shanghai) Company Limited, Part C, Plant 9, No. 353 North Riying Road, China

(Shanghai) Pilot Free Trade Zone

EU Importer: Bose Products B.V., Gorslaan 60, 1441 RG Purmerend, The Netherlands

Taiwan Importer: Bose Taiwan Branch, 9F-A1, No. 10, Section 3, Minsheng East Road, Taipei City 104, Taiwan

Phone Number: +886-2-2514 7676

Mexico Importer: Bose de México, S. de R.L. de C.V., Paseo de las Palmas 405-204, Lomas de Chapultepec,

11000 México, D.F. Phone Number: +5255 (5202) 3545

The CMIIT ID is located on the rubber foot on the bottom of the product.

REGULATORY AND LEGAL INFORMATION

6

|

ENG

Security Information

This product is capable of receiving security updates from Bose automatically when connected to the

Bose Connect app. In order to receive security updates via the mobile application, you must complete the

product setup process in the Bose Connect app. If you do not complete the setup process, you will be

responsible for installing security updates that Bose makes available via btu.Bose.com

Apple, the Apple logo, iPad, iPhone, iPod, and Siri are trademarks of Apple Inc., registered in the U.S. and other

countries. App Store is a service mark of Apple Inc. The trademark “iPhone” is used in Japan with a license from

Aiphone K.K.

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such

marks by Bose Corporation is under license.

Google and Google Play are trademarks of Google LLC.

The N-Mark is a trademark or registered trademark of NFC Forum, Inc. in the United States and in other countries.

Bose, Bose Home Speaker, Bose Music, Bose Portable Home Speaker, Bose Portable Smart Speaker, Bose Smart

Soundbar, Bose Smart Speaker, Bose Soundbar, SimpleSync, SoundLink, and SoundLink Revolve are trademarks of

Bose Corporation.

Bose Corporation Headquarters: 1-877-230-5639

prior written permission.

CONTENTS

7

|

ENG

WHAT’S IN THE BOX

Contents ............................................................................................................................. 10

BOSE CONNECT APP SETUP

Download the Bose Connect app ............................................................................ 11

SPEAKER PLACEMENT

Placement guidelines .................................................................................................... 12

POWER

Connect to power ........................................................................................................... 13

Power on/o your speaker ......................................................................................... 13

Battery protection mode ............................................................................................. 14

Auto-o .............................................................................................................................. 14

Disable auto-o ....................................................................................................... 14

SPEAKER CONTROLS

Media playback and volume ....................................................................................... 16

Phone calls......................................................................................................................... 17

Access voice control .............................................................................................. 17

Voice alerts ................................................................................................................ 17

VOICE PROMPTS

Pre-installed languages ................................................................................................ 18

Select a language ........................................................................................................... 18

Change the language .................................................................................................... 18

Disable voice prompts .................................................................................................. 18

CONTENTS

8

|

ENG

BLUETOOTH® CONNECTIONS

Choose your pairing method ..................................................................................... 19

Pair your mobile device ................................................................................................ 20

Pair a mobile device with NFC .................................................................................. 21

Pair an additional mobile device ............................................................................... 22

Disconnect a device ....................................................................................................... 22

Reconnect a device ........................................................................................................ 22

MULTIPLE BLUETOOTH CONNECTIONS

Identify connected mobile devices .......................................................................... 23

Switch between two connected devices ............................................................... 23

Connect a previously paired device ........................................................................ 23

Clear the speaker pairing list ...................................................................................... 23

Use the Bose Connect app ......................................................................................... 23

WIRED CONNECTIONS

Connect the 3.5 mm stereo cable ............................................................................ 24

Connect the USB cable ................................................................................................ 24

SPEAKER STATUS

Battery status ................................................................................................................... 26

Bluetooth status .............................................................................................................. 26

Input status ....................................................................................................................... 26

CONTENTS

9

|

ENG

PAIR BOSE PRODUCTS

Choose your pairing method ..................................................................................... 27

Pair with another Bose SoundLink Bluetooth speaker .................................... 27

Pair the speakers using the Bose Connect app (recommended) ........ 27

Pair the speakers manually ................................................................................. 28

Switch between Party mode and Stereo mode .......................................... 29

Disable Party mode or Stereo mode............................................................... 29

Pair with a Bose Smart Speaker or Soundbar ..................................................... 30

Compatible products ............................................................................................ 30

Pair using the Bose Music app .......................................................................... 30

Reconnect to a Bose Smart Speaker or Soundbar ............................................ 31

CARE AND MAINTENANCE

Clean the speaker ........................................................................................................... 32

Replacement parts and accessories ........................................................................ 32

Limited warranty ............................................................................................................. 32

Technical information .................................................................................................... 32

TROUBLESHOOTING

Try these solutions ﬁrst ................................................................................................ 33

Other solutions ................................................................................................................ 33

Reset your speaker ......................................................................................................... 35

10

|

ENG

CONTENTS

Conﬁrm that the following parts are included:

SoundLink Revolve II

Bluetooth speaker

USB cable

NOTE: If any part of the product is damaged, don’t use it. Contact your authorized

Bose dealer or Bose customer service.

Visit: worldwide.Bose.com/Support/SLRii

WHAT’S IN THE BOX

11

|

ENG

BOSE CONNECT APP SETUP

The Bose Connect app lets you set up and control the speaker from any mobile

device, such as a smartphone or tablet.

Using the app, you can manage Bluetooth connections, choose your voice prompt

language, manage speaker settings, and get new features.

DOWNLOAD THE BOSE CONNECT APP

1. On your mobile device, download the Bose Connect app.

BOSE CONNECT

2. Follow the app instructions.

12

|

ENG

SPEAKER PLACEMENT

PLACEMENT GUIDELINES

• For best Bluetooth performance, place your mobile device within 30 ft (9 m) of your

speaker, and make sure there is a clear line of sight between you and your speaker.

Moving your device farther away, or not having a clear line of sight may impact

sound quality, and your device may disconnect from your speaker.

• Keep other wireless equipment at least 3 ft (1 m) away from your speaker.

• Place your speaker and your device outside of and away from metal cabinets,

other audio/video components, and direct heat sources.

CAUTIONS

• Stand your speaker on its base. Standing your speaker on any other side may cause

damage to your speaker and aect sound quality.

• Avoid placing your speaker on wet or dirty surfaces.

13

|

ENG

POWER

CONNECT TO POWER

Your speaker ships with a partial charge. Before using your speaker for the ﬁrst time,

connect it to an AC (mains) outlet. Your speaker does not need to be fully charged,

but it does require the initial connection to activate the battery.

NOTE: Use a 1500mA (1.5A) USB power supply for the best speaker charging

experience. Using a power supply with less than 1500mA (1.5A) may result

in a slower charging time or your speaker may not be able to charge while

playing audio.

1. Plug the small end of the USB cable into the micro-B USB connector on

your speaker.

2. Plug the other end into a USB power supply (not provided).

The battery light 6 blinks amber, and your speaker emits a tone. When fully

charged, 6 glows green.

POWER ON/OFF YOUR SPEAKER

On the button pad, press the Power button I.

• The ﬁrst time you power on your speaker, the Bluetooth light glows blue, and you

hear a voice prompt to select a language (see page 18).

• If you have already powered on your speaker and paired at least one mobile device,

the Bluetooth

light blinks white and connects to the last two paired mobile devices.

You hear “Battery <number> percent. Connected to <mobile device name>.” The

Bluetooth light glows solid white.

POWER

14

|

ENG

BATTERY PROTECTION MODE

When your speaker is unplugged and unused for more than three days with a

r emaining charge of less than 10 percent, it enters battery protection mode to

preserve battery power. To reactivate your speaker, connect it to AC (mains) power.

When not in use, store your speaker in a cool place.

CAUTION: Do not store your speaker for extended periods when fully charged or

when the battery light 6 blinks red.

AUTO-OFF

Your speaker powers o after 20 minutes of inactivity (no sound coming from your

speaker) while using the following connections and power sources:

• AUX connection operating on battery or AC (mains) power.

• Bluetooth connection operating on battery power.

Disable auto-o

1. Press and hold H and the Input mode button 7 simultaneously.

You hear “Auto-o disabled.”

2. Repeat to re-enable the auto-o feature.

15

|

ENG

SPEAKER CONTROLS

The button pad enables you to power on your speaker and control your speaker’s

playback, volume, and speakerphone.

NOTE: Certain mobile devices may not support these functions.

Power button

Bluetooth

button

Multi-function button

Input

mode

button

Volume up

Volume down

SPEAKER CONTROLS

16

|

ENG

The Multi-function button V controls music sources and speakerphone calls on your

mobile device from your speaker.

MEDIA PLAYBACK AND VOLUME

FUNCTION WHAT TO DO

Play/Pause

Press V.

NOTE: In Input mode, pressing V

mutes the audio

(see page 24).

Skip forward to the

next track

Double-press V.

Skip backward to the

previous track

Triple-press V.

Volume up

Press H.

Volume down

Press z.

SPEAKER CONTROLS

17

|

ENG

PHONE CALLS

FUNCTION WHAT TO DO

Make a call

Press and hold the Multi-function button V to activate

voice control on your mobile device. See “Access voice

control” below.

Switch a call from

speakerphone to your

mobile device, while on a call

Press and hold V.

Answer/End a call

Press V.

Decline an incoming call

Press and hold V.

Answer a second incoming

call and put the current call

on hold

While on a call, press V to answer a second call.

Decline a second incoming call

and stay on current call

While on a call, press and hold V

for one second.

Switch between two calls

With two active calls, double-press V.

Mute/unmute a call

While on a call, press H and z simultaneously.

Access voice control

The microphone in the speaker acts as an extension of the microphone in your

smartphone. Using V on the speaker, you can access voice control on your mobile

device to make/take calls, play music, tell you the weather, give you the score of a

game, and more.

Press and hold V to access voice control on your device. You hear a tone that

indicates voice control is active.

Voice alerts

Your speaker identiﬁes incoming callers (when applicable). To disable this feature, see

page 18.

18

|

ENG

Voice prompts guide you through the Bluetooth pairing and connecting processes.

PRE-INSTALLED LANGUAGES

• English • German • Korean • Swedish • Polish

• Spanish • Mandarin • Italian • Dutch

• French • Japanese • Portuguese • Russian

SELECT A LANGUAGE

1. Press z or H to scroll through available languages.

2. When you hear your language preference, press and hold the Multi-function

button V to select it.

You hear a beep and “Ready to pair.”

CHANGE THE LANGUAGE

1. Press and hold z and the Input mode button 7 simultaneously until you hear the

voice prompt for the ﬁrst language option.

2. Press z or H to scroll through available languages.

3. When you hear your language preference, press and hold V until you hear a beep,

and “Connected to <mobile device name>.”

DISABLE VOICE PROMPTS

Press and hold z and H simultaneously until you hear “Voice prompts o.”

NOTE: Repeat to re-enable voice prompts.

VOICE PROMPTS

19

|

ENG

BLUETOOTH CONNECTIONS

Bluetooth wireless technology lets you stream music from mobile devices such as

smartphones, tablets, and computers. Before you can stream music from a device,

you must pair the device with your speaker.

CHOOSE YOUR PAIRING METHOD

You can pair your device with your speaker using Bluetooth wireless technology or

Near Field Communication (NFC).

You can also use the Bose Connect app to pair your device (see page 11).

What is NFC?

NFC is a technology that enables mobile devices to establish wireless communication

with each other by simply tapping the devices together. Refer to your device owner’s

guide to see if your model supports NFC.

If your device does not support Bluetooth

pairing via NFC or if you are unsure:

Follow the instructions for “Pair your mobile

device” on page 20.

If your device supports Bluetooth pairing

using NFC:

Follow the instructions for “Pair a mobile

device with NFC” on page 21.

NOTE: If your device supports Bluetooth pairing via NFC, you can use either

pairing method.

20

|

ENG

BLUETOOTH CONNECTIONS

PAIR YOUR MOBILE DEVICE

When you power on your speaker for the ﬁrst time, the speaker automatically

searches for your mobile device.

1. On your device, turn on the Bluetooth feature.

TIP: The Bluetooth feature is usually found in the Settings menu.

2. Select your Bose Revolve II SoundLink speaker from the device list.

Once paired, you hear “Connected to <mobile device name>,” and the Bluetooth

light glows solid white.

NOTE: To pair an additional device, see page 22.

La page charge ...

Bose SoundLink Revolve II Bluetooth® Le manuel du propriétaire

Ce manuel convient également à

Bose SoundLink Revolve II Bluetooth® Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents