MPMan PC24 Le manuel du propriétaire

Catégorie
Caméscopes
Taper
Le manuel du propriétaire
PC24
1
1. PARTS OF THE CAMCORDER 2
2. PREPARING FOR USING 3
INSTALLING THE BATTERY 3
INSERTING THE MEMORY CARD 4
3. USING THIS CAMCORDER 4
T
URNING THE CAMCORDER ON AND OFF 4
CHANGE THE RECORD MODE 5
RECORDING A VIDEO CLIP 6
TAKING STILL IMAGES 6
RECORDING AUDIO 7
4. USING THE MENU IN RECORD MODE 8
M
ENU IN CAPTURE MODE 8
MENU IN VIDEO MODE 10
SETUP MENU 11
5.PLAYBACK 14
P
LAYING BACK MOVIE CLIPS 14
PLAYBACK STILL IMAGE 14
PLAYING BACK AUDIO FILES 15
DELETE FILES IN PLAYBACK MODE 16
6. MAKING CONNECTIONS 16
C
ONNECTING THE CAMCORDER TO A TV 16
CONNECTING THE CAMCORDER TO A PC 17
7. SOFTWARE INSTALLATION 18
8. TECHNICAL SPECIFICATIONS 20
2
1. Parts of the camcorder
1: LCD screen
2: joystick/OK button
3: Power/ charging LED
4: Shutter button
5: Display button
6: Mode button
7: Power button
8: Menu/Delete button
9: USB jack
10: TV out jack
11: Strap mount
12: SD card slot
13: Microphone
14: Speak er
15: Lens
16: Self-timer LED
17: Flash strobe 18: Battery cover
3
2. Preparing for using
Installing the Battery
1. Open the battery door.
2. Insert three AAA-size b atteries with the positive (+) and negative (-)
poles matching the directions indic ated on the battery cover.
3. Close the battery door
4
Inserting the Memory Card
1. Turn off the camcorder.
2. Find the SD card slot : it is at the bottom
of the camcorder.
3. Insert the memory card as illustrated.
Never insert any other object which is
not a SD/MMC card into the camera’s
SD card slot. Doing so will cerate the risk of damaging to the
camera and the card.
To release the memory card press the edge of the card gently.
3. Using this camcorder
Turning the Camcorder On and Off
Open the LCD panel the camcorder turns on and cl ose the LCD panel the
camcorder turns off.. You may turn the camcorder on and off by another
way:
5
1. Open the LCD panel. Press the POWER button to turn on the
camcorder.
2. Press the POWER button again to turn the camcorder off.
Change the record mode
There are four record modes in this camcorder.
1: Turn on the camcorder
2: Press the MODE button to change the mode. Each time the MODE
button is pressed the mode icon is chang ed.
Display Ti tl e Description
Capture mode For taking still photos.
Video mode For recording movie clips.
Audio mode For recording audi o files.
Playback mode Preview the record files.
6
Recording a video clip
1: Turn on the camcorder and set the camcorder to video record mode
( ).
2: Zooming:
Moving the joystick upward or do wnward to zoom in or zoom out the screen.
The value of magnification lev e l ap pears on the LCD monitor.
3: Press the SHUTTER button to start recording. Push the joystick
rightward to pause and push it again to continue.
4: Press the SHUTTER again to end the r ecording. If the memory is full the
video camera will stop recording automatic ally.
On the upper of the LCD monitor displays the recorded time.
Taking still images
1. Turn on the camcorder.
2. Press the MODE button to set the camcorder to capture mode, the
icon
appears on the LCD screen.
7
3. Zooming:
Moving the joystick up or do wn to zoom in or zoom out the
screen.
the value of magnification lev el appears on the LCD
monitor.
3. Hold the camcorder steady and then press the SHUTTER button
down to take a picture.
Recording audio
1: Turn the camcorder on and set it to audio record mode.
2: Press the SHUTTER button to start recording. Push the joystick
rightward to pause and push it again to continue.
3: Press the SHUTTER again to end the r ecording. If the memory is full the
video camera will stop recording a utomatic ally.
On the center of the LCD monitor displays the recorded time.
There is no menu in audio record mode.
8
4. Using the menu in record mode
When a menu is displa yed, the joystick is used to make the desired setting.
The audio record mode d oesn’t have a menu.
Menu in capture mode
1: Turn on the camcorder and set it to capture mode.
2: Press the MENU button to display the menu.
3: Move the joystick upward or downward to select an item.
4: Push the joystick rightward to enter the submenu.
5: Use the joystick to select the desired item.
6: Press the OK button to confirm the setting.
7: Press the MENU button to close the menu.
Capture menu list
Menu item Function
Resolution There are five options for choice:
[12M]4000x3000/ [5M] 2592x1944/ [3M] 2048x1 536 /
9
[1M]1024x768 /[VGA] 640X480.
Quality Select a lower image quality to decre ase the image size in
order to capture more images. There are three optio ns for
choice:[Super Fine] /[Fine] /[Normal].
Metering Change the metering method to change the brightness of
the picture.
[Center]: The exposure will be calculated b ased on light in
the center area and this is suitable for ge neral use.
[Multi]: The exposure will be calcul ated based on the
average light.
[Spot]: Only the spot in the center of the LCD screen will be
metered for light.
White
Balance
Adjust the white balance to suit different light sources.
There five items for option: [Auto]/ [Daylight]/ [Cloudy] /
[Fluorescent] / [Tungsten].
Exposure Set the exposure value manually to compensate for unusu al
lighting conditions suc h as indirect indoor lig hting, dark
backgrounds, and strong bac klighting. The exposure value
10
range is –2.0 to 2.0.
Driver
Mode
Use this item to set the camera to different mode: Off/
Self-timer 2s/ Self-timer 10s/ Burst
Effect Use this function to change the image’s color tone: Normal/
B&w/ Sepia / Negative/ Red/ Green/ Blue.
Date
Stamp
This function can be us ed to add a date to your pictures as
you take them. There are thre e items for opti on:
11
5: Press the OK button to confirm the setting.
6: Press the MENU button to close the menu.
Menu item Function
Movie Size Select small movie size to record long er time. There are
two items for option:[ 640x480/ 320X240.
Frame Rate Select low frame rate to record longer time. There are
two items for option: [High]/[ Low].
Metering See the details on page 9.
White Balance See the details on page 9.
Setup menu
You can set the system items in setup menu.
1: Turn the power on and press the MENU button to
display the menu.
2: Push the joystick rightward to select
[Setup].
3: Move the joystick upward or downward to select
an item.
4: Push the joystick rightward to enter the submenu.
5: Push the joystick upward or downward to select the desired item.
12
6: Press the OK button to confirm the setting.
7: Press the MENU button to close the menu.
Menu item Function
Sounds There are four items for option:
[Shutter]: Set the shutter sound on or off by pressing the
joystick RIGHT.
[Start-up]: Set the start-up sound. Press the joystick
RIGHT to change the sound. There are four options:
[None] / [1]/ [2] / [3].
[Beep]: Set the operation soun d on or off by pressing the
joystick RIGHT.
[Volume]: Adjust the sound v olume. You can change it
by pressing the joystick RIGHT.
Auto Review Adjust the review time after taking a picture. There are
three items for option: [Off]/ [1sec.]/ [3 sec.].
Power
frequency
Light Frequency should be set to either 60Hz or 50Hz
depending on your reg ion. [50HZ] / [60HZ].
Power save To save power, the camera is turned off automaticall y
13
after a period of time. There are three o ptions: [1min.] /
[3min.] / [5min.].
Date& Time Set the date and time.
Language Choose an language for dis playing the information on
the LCD.
TV Out TV Out should be set to either NTSC or PAL dependin g
on your region. [NT SC] /[PAL].
USB You can use this camera as a PC camera or removable
disk. [PCCAM]: Use as a PC camera;
[MSDC]: Use as a removable disk.
Start-up
Image
You can use your love d picture as the start-up image.
[Off]: No start-up image.
[System]: Use the default image as the start-up image.
[My image]: Use your loved image as th e start-up
image.
Format All data will be deleted including protected fil es. Be sure
to download important files to your computer before
formatting. [Yes]/ [ No].
14
Reset all To reset the entire menu and button operation settings
to initial default. [Yes]/ [ No].
5.Playback
Playing back movie clips
1: Set the camcorder to playback mode.
2: Push the joystick leftward or rightward to select the movie clips you want
to playback.
3: Press the OK button to start playing. Push the joystick upward to pause it
and push it again to continue. Push the jo ystick rightward to fast forward
and push the joystick leftward to back forward.
4: Press the MENU button to end the playing.
Playback still image
1: Set the camcorder to playback mode.
The latest recorded file appears on the LCD screen. If there are no
images stored, a message [No Image] appe ars.
15
2: Push the joystick leftward or rightward to preview the previous or next
image.
3: Zooming:
Moving the joystick upward to zoom in the image. When the picture is
enlarged press the OK button to lock the zoom ratio and th en you can
push the joystick up ward/do wn ward/Leftward/Right ward to browse the
details of the image. Press the MENU button to recover the picture to
initial size.
Playing back audio files
1: Set the camcorder to playback mode.
2: Push the joystick leftward or rightward to select the audio file you w ant to
playback.
3: Press the
16
Delete files in playback mode
1: Press the MENU button in playback mode.
2: Move the joystick upward or downward to select the item [Delete].
3: Push the joystick rightward to enter the submen u.[ One]: Delete current
file. [All]: Delete all files except locked files.
4: Move the joystick upward or downward to select the item.
5: Press the OK button to confirm the setting. A dialog box will appear.
Move the joystick upward or downward to select the item [Yes].
6: Press the OK button to delete the current file or all files.
6. Making connections
Connecting the Camcorder to a TV
When plug in the TV-out cable (suppl ied) to the camcorder output jack the
LCD screen turns black, Connect the camcorder to a TV and the TV screen
now performs as the camcorder LCD screen.
1. Connect the camcorder to a TV via the TV-out cable (suppli ed)
2. T urn on the TV and the camcorder, and then set the T V to “AV” mode.
17
3. When the camcorder is set to record mode, you can pr eview the
subjects you want to record on the TV screen.
4. When the camcorder is set to Playback mode, you can review all the
pictures, video and audio clips stored in the camera o n the TV.
Connecting the Camcorder to a PC
1: Set the USB mode to [MSDC] mode.
2:Connect the supplied USB cable to the computer's USB port and turn on
the video camera. A message “MSDC” appears on the screen when
connection to the computer has been successfull y completed.
3: Open [My Computer] or [Windows Explorer]. A "Removable D isk"
appears in the drive list. Double-click the "Re movab le Disk" icon to vie w its
contents. Files stored on the camera are located in the folder nam ed
"DCIM".
4: Copy the photos or files to your computer.
18
7. Software Installation
Installing the Software
The bundled software CD has the drivers and soft ware that come with
video camera. Insert the CD into your CD- ROM drive. The autorun menu
appears:
Install Driver
1:Click [Install Driver].
2:
Follow the on-screen instructions to install the drivers.
3: When the installation is finished it will create an icon
on the desktop.
19
How to use the PC Camera function
Please install the camera driver first.
Connect the camera to the computer with a
USB cable, double click the icon
to run
the program. If it was the first time you use
this function please select the item <
Preview> as in the illustratio n. And then you
can use it as the pc camera function.
If you want to change the imaging size, select <Video Captur e Pin> to
change the Output Size.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122

MPMan PC24 Le manuel du propriétaire

Catégorie
Caméscopes
Taper
Le manuel du propriétaire