Philips BRI957/00 Manuel utilisateur

Lumea

BRI958, BRI957,

BRI955

1

2a

7

36

4

14

15

16

BRI955 (2a, 2b, 2e)

BRI957, BRI958 (2a, 2b, 2c, 2d)

2d

3

4

2e

3

4

1

8

12

11

9

10

17

18

2c

3

4

2b

3

4

5

13

Suitable skin tones / Teintes de peau adaptées /

適合的皮膚色調 / /

Suitable body hair colors / Couleurs de poils du

corps adaptées / 適合的體毛顏色 /

Suitable skin tones Suitable body hair colors

ﺐﺳﺎﻨﻣ ﺖﺳﻮﭘ یﺎﻫ ﮓﻧر

ﺔﺒﺳﺎﻨﻤﻟا ةﺮﺸﺒﻟا ناﻮﻟأ

ﺔﺒﺳﺎﻨﻤﻟا ﻢﺴﺠﻟا ﺮﻌﺷ ناﻮﻟأ

/ نﺪﺑ ﺐﺳﺎﻨﻣ یﺎﻫﻮﻣ ﮓﻧر

BRI958-BRI957-BRI955_ONYX_3000.058.8022.1_SkintoneTable_A5_fc.indd 1BRI958-BRI957-BRI955_ONYX_3000.058.8022.1_SkintoneTable_A5_fc.indd 1 30-09-20 12:0130-09-20 12:01

English 6

Français 32

繁體中文

61

ﺔﻴﺑﺮﻌﻟﺍ

84

ﯽﺳرﺎﻓ

108

English

6

English

Contents

Welcome_______________________________________________________________________________________________ 6

Device overview________________________________________________________________________________________ 7

Contraindications _____________________________________________________________________________________ 7

Important safety instructions__________________________________________________________________________ 9

How IPL works_________________________________________________________________________________________ 12

Recommended treatment schedule__________________________________________________________________ 12

What to expect_________________________________________________________________________________________ 13

How to use your Lumea Series 9000_________________________________________________________________ 14

Learning more about your Lumea Series 9000_______________________________________________________ 19

Charging________________________________________________________________________________________________ 19

Attachments___________________________________________________________________________________________ 19

SmartSkin sensor______________________________________________________________________________________ 21

Selecting the light intensity____________________________________________________________________________ 22

Two treatment modes: Stamp & Flash and Slide & Flash_____________________________________________ 23

Treatment time per area_______________________________________________________________________________ 24

Using your Lumea Series 9000 before and after tanning____________________________________________ 25

Traveling with the device______________________________________________________________________________ 25

After use________________________________________________________________________________________________ 25

Troubleshooting_______________________________________________________________________________________ 27

Warranty and support_________________________________________________________________________________ 29

Recycling_______________________________________________________________________________________________ 29

Technical specifications_______________________________________________________________________________ 30

Electromagnetic compatibility - Compliance information____________________________________________ 30

Explanation of symbols________________________________________________________________________________ 30

Welcome

Welcome to the beauty world of Lumea Series 9000! You are only a few

weeks away from silky-smooth skin.

Philips Lumea Series 9000 uses Intense Pulsed Light (IPL) technology,

known as one of the most effective methods to continuously prevent hair

regrowth. In close collaboration with skin experts we adapted this light-

based technology, originally used in professional beauty salons, for easy

and effective use in the comfort of your home. Philips Lumea Series 9000 is

gentle and offers convenient and effective treatment at a light intensity that

you find comfortable. Unwanted hairs are finally a thing of the past. Enjoy

the feeling of being hair-free and look and feel amazing every day.

Philips Lumea Series 9000 has been designed and developed for women,

but may be suitable for use by men.

To fully benefit from the support that Philips offers, register your product

and find further information about your product at

www.philips.com/support to find our experts' advice, tutorial videos and

FAQs and make the most of your Lumea Series 9000.

Note: Keep these instructions with your product at all times.

7

English

Device overview

1 Light exit window with integrated UV filter

2 Attachments

a Body attachment

b Facial attachment

c Bikini attachment (BRI957, BRI958)

d Underarm attachment

(BRI957, BRI958)

e Precision attachment

(BRI955 )

3 SmartSkin sensor

4 Integrated safety system

5 Reflector inside the attachment

6 Electronic contacts

7 Opening for electronic contacts

8 Flash button

9 On/off button

10 Confirmation button

11 Toggle buttons

12 Intensity lights

13 Setting advice button

14 'READY to flash' light

15 Air vents

16 Device socket

17 Adapter

18 Small plug

19 Luxurious pouch (not shown)

20 Cleaning cloth (not shown)

Contraindications

Conditions

Never use the device:

-

If you have skin type VI (you rarely to never sunburn, very dark tanning). In

this case you run a high risk of developing skin reactions, such as

hyperpigmentation and hypopigmentation, strong redness or burns.

-

If you are pregnant or breastfeeding as the device was not tested on

pregnant or breastfeeding women.

-

If you have any active implants such as a pacemaker, neurostimulator,

insulin pump etc.

Medications/History

Never use the device if you take any of the medications listed below:

-

If your skin is currently being treated with or has recently been treated in

the past week with Alpha-Hydroxy Acids (AHAs), Beta-Hydroxy Acids

(BHAs), topical isotretinoin and azelaic acid.

8

English

-

If you have taken any form of isotretinoin Accutane or Roaccutane in the

last six months. This treatment can make skin more susceptible to tears,

wounds and irritations.

-

If you are taking photosensitizing agents or medications, check the

package insert of your medicine and never use the device if it is stated

that it can cause photo-allergic reactions, photo-toxic reactions or if you

have to avoid sun when taking this medicine.

-

If you take anticoagulation medications, including heavy use of aspirin, in

a manner which does not allow for a minimum 1-week washout period

prior to each treatment.

Never use the device:

-

If you have received radiation therapy or chemotherapy within the past 3

months.

-

If you are on painkillers which reduce the skin's sensitivity to heat.

-

If you take immunosuppressive medications.

Pathologies/Disorders

Never use the device:

-

If you have diabetes or other systemic or metabolic diseases.

-

If you have congestive heart disease.

-

If you have a disease related to photosensitivity, such as polymorphic

light eruption (PMLE), solar urticaria, porphyria etc.

-

If you have a history of collagen disorder, including a history of keloid

scar formation or a history of poor wound healing.

-

If you have epilepsy with flashlight sensitivity.

-

If your skin is sensitive to light and easily develops a rash or an allergic

reaction.

-

If you have a skin disease such as active skin cancer, you have a history

of skin cancer or any other localized cancer in the areas to be treated.

-

If you have a history of vascular disorder, such as the presence of

varicose veins or vascular ectasia in the areas to be treated.

-

If you have any bleeding disorder.

-

If you have a history of immunosuppressive disease (including HIV

infection or AIDS).

Skin conditions

Never use the device:

-

If you have infections, eczema, burns, inflammation of hair follicles, open

lacerations, abrasions, herpes simplex (cold sores), wounds or lesions

and haematomas (bruises) in the areas to be treated.

-

On irritated (red or cut), sunburned, recently tanned or fake‑tanned skin.

-

On the following areas: On moles, freckles, large veins, darker pigmented

areas, scars, skin anomalies without consulting your doctor. This can

result in a burn and a change in skin color, which makes it potentially

harder to identify skin-related diseases.

-

On the following areas: warts, tattoos or permanent make‑up.

9

English

Location/areas

Never use the device on the following areas:

-

Around the eyes and near the eyebrows.

-

On the lips, nipples, areolas, labia minora, vagina, anus and the inside of

the nostrils and ears.

-

If you have had surgery in the areas to be treated in the last three weeks.

-

Men must not use the device on the face and neck including all beard-

growing areas, nor on the whole genital area.

-

On areas where you use long-lasting deodorants. This can result in skin

reactions.

-

Over or near anything artificial like silicone implants, subcutaneous

injection ports (insulin dispenser) or piercings.

Note: This list is not exhaustive. If you are not sure whether you can use the

device, we advise you to consult your doctor.

Important safety instructions

Warnings

-

Please read and follow these instructions to optimize the use of the

device and prevent/ minimize the risk of injury, skin reactions and side

effects.

-

Before you use Lumea Series 9000, you should clean your skin and make

sure it is hair‑free, entirely dry and free from any lotion or gel.

-

Keep the device and the adapter dry.

-

This device is not washable. Never immerse the device in water and do

not rinse it under the tap.

-

Water and electricity are a dangerous combination. Do not use this

appliance in wet surroundings (e.g. near a filled bath, a running shower or

a filled swimming pool). Moisture can damage the device and lead to a

potential safety hazard.

-

Always check the device before you use it. Do not use the device or

adapter if it is damaged. Always replace a damaged part with one of the

original type.

-

If the device or adapter is broken or damaged, do not touch any inner

part to avoid electric shock.

-

Do not use the device if the UV filter of the light exit window and/or

attachment is broken, as safe operation cannot be guaranteed under

these circumstances.

-

Do not attempt to open or repair your device or change the non-

replaceable batteries. Opening Philips Lumea Series 9000 may expose

you to dangerous electrical components and to pulsed light energy,

either of which may cause bodily and/or eye injury.

10

English

-

Always return the device to a service center authorized by Philips for

examination or repair. Repair by unqualified people could cause an

extremelyhazardous situation for the user.

-

No modification of this equipment is allowed. Do not modify, override or

cut off any part of the device (e.g. battery, adapter or the cord), as this

causes a hazardous situation.

-

Do not look at the flash while using the device. Use the device in a well-lit

room so that the light is less glaring to your eyes. While not necessary for

safety, you may wear sunglasses or goggles for your convenience if you

find the light uncomfortable or too bright.

-

Do not treat the same skin area more than once during a session. This

may increase the risk of skin reactions.

-

For hygienic reasons, the device should only be used by one person.

-

Do not use hair removal creams in the area (to be) treated with the

device, as chemicals may cause skin reactions.

-

Do not use any pencil or pen to mark the areas to be treated. This may

cause burns on your skin.

-

The device can be stored at a temperature between -25°C and 70°C.

Charge and use the device at a temperature between 5°C and 35°C. The

device will not work properly outside of this temperature range. This may

cause burns on your skin.

-

Only use thisproduct for its intended purpose and follow the general

and battery safety instructions as described in this user manual. Any

misuse can cause electric shock, burns, fire and other hazards or injuries.

-

Hair removal by intense pulsed light sources can cause increased hair

growth in some individuals. Based upon currently available data, the

highest risk groups for this response are females of Mediterranean,

Middle Eastern and South Asian heritage treated on the face and neck.

-

If you experience skin irritation or skin redness after treatment, wait until

it disappears before applying any product to your skin. If you experience

skin irritation after applying a product to your skin, wash it off with water.

If you still get skin reactions, stop using the device and consult your

doctor.

-

If shaving, epilating or waxing causes skin irritation, we advise you not to

use the device until skin irritation has disappeared.

-

This device is not intended for use by persons with reduced physical,

sensory or mental capabilities, or lack of experience and knowledge,

unless they have been given supervision or instruction concerning use of

the device by a person responsible for their safety.

-

Children should be supervised to ensure that they do not play with the

device. Supervision is required to avoid potential risks such as exposure

to the light output, electrocution, strangulation from the cables or

choking on the attachments.

-

Tanning with natural or artificial sunlight might influence the sensitivity

and color of your skin. Perform a skin test to determine the appropriate

light intensity setting.

-

After each treatment, wait at least 48 hours before tanning to ensure any

skin reaction has been resolved.

-

If you notice a skin tone change since the last treatment, we advise you

to perform a skin test and to wait 24 hours before your next treatment.

11

English

-

Always check the device before you use it. Make sure that the SmartSkin

sensor window is clean when using the device, to avoid improper

operation (see 'D Clean & store after treatment').

-

The adapter, light exit window and the filter of the attachments can

become very hot ( >210°C/>410°F ) during usage. Always let the adapter,

the light exit window as well as the filter and inner parts of the

attachments cool down before you touch them.

-

This device has a detachable power supply unit that is IEC 60601-1 and

IEC 60950-1 class II compliant. Only use the adapter provided with this

device. Do not use an extension cord. The reference number

(AD2069x20020HF) can be found on your device. The 'x' in this number

refers to the plug type for your country.

-

Never leave the product unattended when it is plugged in.

-

Always unplug the product when it is fully charged.

-

Do not expose the device to direct sunlight or to high temperatures (near

hot stoves, in microwave ovens or on induction cookers). Batteries may

explode if overheated.

-

If the battery is damaged or leaking, avoid contact with skin or eyes. If this

occurs, immediately rinse well with water and seek medical attention.

-

If the device behaves in a different way during your normal routine (e.g.

abnormal smell or vibrations, longer charging time) stop using and

charging your device and contact customer support for help.

-

Follow the recommended treatment schedule. Increasing the frequency,

especially in the initial phase, can increase the risk of skin reactions.

12

English

How IPL works

1

With Intense Pulsed Light technology, gentle pulses of light are applied to

the skin and absorbed by the hair root. The lighter the skin and the darker

the hair, the better the pulses of light are absorbed.

2

The pulses of light stimulate the hair follicle to go into a resting phase. As a

consequence, the hair sheds naturally and hair regrowth is prevented.

3

The cycle of hair growth consists of different phases. IPL technology is only

effective when the hair is in its growing phase. Not all hairs are in the

growing phase at the same time. This is why we recommend you to follow

the initial treatment phase (4 treatments, every treatment 2 weeks apart)

and then the follow‑up treatment phase (touch‑ups every 4 weeks) to make

sure all hairs are effectively treated in the growing phase.

Tip: To assure long lasting hair removal, touch-ups every 4 weeks are

recommended.

Suitable body hair colors

Treatment with Lumea Series 9000 is not effective if you have light blond,

grey, red or white hairs as hairs with these colors do not absorb enough

light.

Note: To check if your body hair color allows usage of the device, consult the

hair color table on the foldout page.

Recommended treatment schedule

Initial phase

To achieve effective hair reduction, follow the initial treatment schedule.

13

English

Initial treatment schedule

For the first 4 treatments, use Lumea Series 9000 once every two weeks to

ensure that all hairs are treated.

-

Treat yourself within 3 days before or after the planned treatment date.

-

If you have not treated yourself within 3 days before or after the planned

treatment date, restart the initial phase. Plan in 4 treatments, one

treatment every two weeks.

Note: If you do not restart the initial phase, you may not see effective hair

reduction.

Note: Replacing one of the IPL treatments with another hair removal

method (waxing, epilating, etc.) will not help to reach the desired hair

reduction.

If you want to remove hairs in between the Lumea Series 9000 treatments,

you can use your normal hair removal method (excluding hair removal

creams).

Touch-up phase

After the initial phase (4 treatments), we recommend touch-ups every 4

weeks.

Touch-up treatment schedule

Treat yourself every 4 weeks. Repeat this 8 times to achieve effective hair

reduction. This is to maintain results and enjoy smooth skin for months.

-

We advise you to treat yourself within 4 days before or after the planned

treatment date.

-

The results may vary based on your individual hair regrowth and also

across different body areas.

-

If you have completed the touch-up phase and you see the need to

continue treatment (hair starts coming back), we advise you to restart the

initial phase.

Tip: Mark the treatment schedule on your calendar to remind yourself of the

planned treatments.

Note: Using the device more often does not enhance the effectiveness.

What to expect

After initial phase

-

Afterthe first treatment, it can take 1 to 2 weeks for the hairs to fall out. In

the first weeks following the initial treatments, you still see some hairs

growing.These are likely to be hairs that were not in their growing phase

during the first treatments.

-

After 2-3 treatments, you should see a noticeable reduction in hair

growth. However, to effectively treat all hairs, it is important to keep on

treating according to the recommended treatment schedule.

-

After 4 treatments, you should see a significant reduction of hair growth

in the areas that you treated with Lumea Series 9000. A reduction of hair

density should be visible as well.

14

English

During touch-up phase

-

Keep on treating with frequent touch-ups (every 4 weeks) to maintain the

result.

How to use your Lumea Series 9000

A Remove hair & clean your skin

1 Remove hair before every treatment as long as hair is still visible. You can

either shave, epilate or wax. Make sure you start to treat before new hair

is visible on your skin. If you choose to wax, wait 24 hours before you use

Lumea Series 9000.

2 Clean and dry your skin. Make sure that it is free from any lotion or gel.

B Test skin 24 hrs before treatment

1 Test your skin to find the correct light setting:

-

For every new body area.

-

After recent tanning.

2 Select the correct attachment to test your skin (see 'Attachments').

15

English

3 Press the on/off button to turn on the device.

4 Choose an area for your skin test.

5 Press the device firmly onto your skin and hold it in place.

The integrated safety system prevents unintentional flashingwithout full

skin contact.

6 Confirm that the 'READY to flash' light lights up white to ensure that there

is full contact with your skin.

-

If the 'READY to flash' light is orange, your skin is too dark to treat. Try

Lumea Series 9000 on a lighter body area.

7 Try each setting on your skin if comfortable:

-

When the 'READY to flash' light is white, press the flash button on the

handle once, to treat one spot with setting ➀

The device makes a soft popping sound. The flash gives you a warm

sensation.

16

English

• You will see a flash of light •

Note: You can toggle through the light intensity settings by pressing the

toggle button.

-

Move to next area. Treat one spot with setting ➁

1

2

3

4

5

-

Move to next area. Treat one spot with setting ➂

-

Move to next area. Treat one spot with setting ➃

-

Move to next area. Treat one spot with setting ➄

24 hrs

8 Wait 24 hours.

9 Check your skin. The highest setting that...

-

still felt comfortable and

-

did not show a skin reaction (e.g. redness, irritation, rash)

... is the setting to start the treatment with.

17

English

1 Connect the power adapter to the device and plug into a power outlet or

charge

the device and use cordless.

2 Press the on/off button to turn on the device.

3 Choose the setting you selected after the skin test (section B, step 9).

4 Press the device firmly onto your skin and hold it in place. The 'READY to

flash' light should light

up white.

5 Press the flash button to release a flash on your skin. The flash treats the

skin

in that spot.

The device

makes a soft popping sound. The flash gives you a warm

sensation.

After

each flash, it takes up to 3.5 seconds until the device is ready to

flash again.

You can release a flash when the 'READY to flash' light lights

up white.

C Treatment

IMPORTANT: First finish section A (Remove hair & clean your skin) and B

(Test

skin 24 hrs before treatment).

18

English

6 Move the device to the next spot, close to, but not overlapping the

previous spot. Make sure that you flash the same area only once.

7 Continue until you have treated the full area. There are two treatment

modes (see 'Two treatment modes: Stamp & Flash and Slide & Flash').

8 Turn off the device when you finished the treatment.

9 Remove hair before every next treatment, as long as hair is still visible.

Note: Do not try the device on difficult or sensitive areas (ankle and bony

area).

D Clean & store after treatment

1 Unplug the device from the power outlet if you have used it with the

power adapter.

2 Let the device cool down.

3 Moisten the soft cloth supplied with a few drops of water.

4 Take the attachment off the device.

A

5 Clean the light exit window of the device (A).

19

English

D

E

CB

6 Clean all surfaces of the attachment, including the metal reflector and

window of the attachment (parts B, C, D, E).

7 Let all parts dry thoroughly.

8 Store in a dust-free place at room temperature.

Learning more about your Lumea Series 9000

Charging

Fully charge the batteries before you use the device for the first time and

when they are empty. Charging the batteries takes up to 1 hour and 40

minutes. Charge the device when the charging light lights up orange during

use to indicate that the battery is low and will run out soon.

Fully charged batteries provide at least 130 flashes at light intensity 5.

Charging the device

1 Turn off the device.

2 Insert the small plug into the device and the adapter in to the power

outlet.

-

During charging, the charging light flashes white.

-

When the batteries are fully charged, the charging light lights up white

continuously.

-

Never cover the adapter and device during charging.

Note: The adapter and device can feel warm during charging. This is

normal.

Note: This device is equipped with battery-overheat protection and does

not charge if the room temperature exceeds 40°C.

3 After charging, remove the adapter from the power outlet and pull the

small plug out of the device.

Tip: Charge the device after each use to save battery life.

Attachments

For optimal results, it is important to use the correct attachment intended

for the specific body area you want to treat. Lumea Series 9000 offers

full‑body treatment with several attachments designed for use on specific

body areas. SenseIQ technology adapts the treatment program when a

different attachment is connected.

Note: The device may not work anymore and show an error when there is

dirt on the attachment connector. Clean the contact leads when this occurs.

20

English

To place the attachment, simply snap it onto the light exit window.

To remove the attachment, pull it off the light exit window.

Body attachment

The body attachment has the largest treatment window and a curved-in

design to effectively cover and treat areas below the neckline, especially

large areas such as legs, arms and stomach.

Facial attachment

The facial attachment has a precise flat design with extra integrated filter for

safe and precise treatment on the sensitive skin above the upper lip, chin

and sideburns. The device is only intended for removing unwanted body

hair from areas below the cheekbones. When you use the device on areas

with sharp contours like the jawline and chin, it may be difficult to establish

full skin contact and release a flash.

Tip: Place your tongue between your upper lip and your teeth or puff out

your cheeks to make the treatment easier.

Underarm attachment (BRI957, BRI958)

The underarm attachment has a specifically curved-out design to treat

underarm hairs that might be hard to reach.

21

English

Bikini attachment (BRI957, BRI958)

The bikini attachment has a specialized design for effective treatment of the

bikini area. It has a curved-out design and has a higher light intensity

compared to body attachment. Hair in this area tends to be thicker and

stronger than leg hair.

Precision attachment (BRI955)

The precision attachment has a curved-out design for use on bikini and

underarm areas. It has a medium sized window with a transparent filter. It is

designed for precise and effective coverage of bikini and underarm areas.

SmartSkin sensor

Lumea Series 9000 offers SenseIQ technology for a personalized hair

removal treatment. The integrated SmartSkin sensor measures the skin tone

at the start of each session and during the session. This provides two

features:

1 The SmartSkin sensor prevents you to treat areas of your skin that are

too dark: if it detects a skin tone that is too dark for treatment with

Lumea Series 9000, the 'READY to flash' light starts blinking orange. It

does not flash when you press the flash button. The device automatically

disables. This prevents you from developing skin reactions.

2 The SmartSkin sensor will help you to select the light intensity setting

that is comfortable for your skin. For this you can use the SmartSkin

button.

La page charge ...

Philips BRI957/00 Manuel utilisateur

Philips BRI957/00 Manuel utilisateur

dans d''autres langues

Documents connexes