LG MRT14B3AWW Manuel utilisateur

Marque: LG

Modèle: MRT14B3AWW

Catégorie: Réfrigérateurs-congélateurs

Taper: Manuel utilisateur

Refrigerator

TOP MOUNTED FREEZER SERIES

USER MANUAL

MRT14B3AWW

Warning notices: Before using this product, please read this manual carefully and keep it for future reference.

The design and speciﬁcations are subject to change without prior notice for product improvement.

Consult with your dealer or manufacturer for details.

The diagram above is just for reference. Please take the appearance of the actual product as the standard.

LANGUAGES

EN English

FR French

ES Spanish

Free 3 months

extension of the

original limited warranty

period!* Simply text a

picture of your proof of

purchase to:

1-844-224-1614

*The warranty extension is for the three months

immediately following

the completion of the product’s original warranty

period. Individuals do not need to register the

product in order to get all the rights and remedies

of registered owners under the original limited

warranty.

THANK YOU LETTER

Thank you for choosing Midea! Before using your new Midea product, please read

this manual thoroughly to ensure that you know how to operate the features and

functions that your new appliance oers in a safe way.

CONTENTS

THANK YOU LETTER ------------------------------------------- 01

SPECIFICATIONS ------------------------------------------------- 02

PRODUCT OVERVIEW------------------------------------------ 03

PRODUCT INSTALLATION ------------------------------------ 04

OPERATION INSTRUCTIONS --------------------------------- 11

CLEANING AND MAINTENANCE---------------------------- 14

TROUBLESHOOTING ------------------------------------------- 16

SPECIFICATIONS

Product model MRT14B3AWW

Total Storage Volume 14.2 cu.ft.

Rated Voltage 115V~/60Hz

Rated Current 1.2A

Overall Dimension (H x W x D) 60.6 in x 27.6 in x 28.8 in

PRODUCT OVERVIEW

Names of components

1Freezer glass shelf 5Fruit and vegetable box

2Refrigerator glass shelf 1 6Freezer door trays

3Tray 7Refrigerator door tray 1

4Refrigerator glass shelf 2 8Refrigerator door tray 2

ATTENTION

The picture above is only for reference. The actual conﬁguration will depend on the physical

product or statement by the distributor.

When the refrigerator is powered on for the initial time, storing too much food may adversely

aect the cooling eect of the refrigerator.

Do not block the air outlet during food storage, which may adversely aect the cooling eect.

If the temperature in fridge compartment is cold, please adjust the switcher to the weaker

position. If the temperature in fridge compartment is not cold enough, please adjust the

switcher to the strong position.

PRODUCT INSTALLATION

Installation Instructions

Finding a suitable location

• This refrigerator is designed to be free standing only, and should not be

recessed or built-in.

• The refrigerator should be placed in a well-ventilated indoor place; the ground

shall be ﬂat and sturdy.

• Keep away from heat and avoid direct sunlight. Do not place the refrigerator in

moist or watery places to prevent rust or reduction of insulating eect.

Dimensions and Clearances

• Too small of a distance from adjacent items may result in the degradation

of freezing capability and increased electricity costs. Allow over 100 mm of

clearance from each adjacent wall when installing the appliance.

Required space for

air circulation

Top View

>100mm

Providing a proper power supply

• Check your local power source. This refrigerator requires a AC115 V, 60 Hz

power supply.

• Use a receptacle that accepts the grounding prong. The power cord is

equipped with a 3-prong (grounding) plug which mates with a standard 3-prong

(grounding) wall outlet to minimize the possibility of electric shock hazard

from this refrigerator.

CAUTION

The refrigerator should always be plugged into its own individual electrical outlet

which has a voltage rating that matches the rating plate.

Never unplug your refrigerator by pulling on the power cord. Always grip the plug

ﬁrmly and pull straight out from the outlet.

Start to use

• The refrigerator shall stay for 2 hours before connecting power when it is ﬁrstly

started.

• The refrigerator shall run 2 to 3 hours before loading fresh or frozen foods; the

refrigerator shall run for more than 4 hours in summer in advance considering

that the ambient temperature is high.

Space requirement diagram (when the door is open and when the door is closed)

135 °

Width Overall

Height Depth Depth Only

Cabinet

Door Open

135o Width

Doors Open

135o Depth

A B C C1 D E

700 1540 731 650 1085 1310

Notice: All dimensions in mm

Door right-left change

List of tools to be provided by the user

Cross screwdriver

Allen wrench

Putty knife Thin-blade screwdriver

5/16” socket and ratchet

Masking tape

Parts to be used for door reverse

SN Parts Quantity Notes

1 Upper hinge 1

Pre-installed on the box and still needs

to be used when changing the door

2 Upper hinge cover 1

3 Upper hinge axle sleeve 1

4 Upper hinge screw 3

5 Hole cover 1

6 Middle hinge screw 2

7 Middle hinge 1

8 Hole plug 2

9 Adjustable foot 1

10 Center sill screw 2

11 Center sill screw cap 1

12 Lower hinge screw 3

13 Lower hinge 1

14 Stopper 2

15 Stopper screw 2

16 Right door self-locking 2 Pre installed on the door body, removed

when changing the door, and retained

17 Left door self-locking 2 Put it in the accessory bag and use it

when changing the door

18 Screw self-locking 2 Pre-installed on the door and still needs

to be used when changing the door

19 Hole plug 1

Step

1. Unplug your refrigerator and remove all food from refrigerator.

2. Remove the top hinge cover, screws and upper hinge on the top of the cabinet, and

the cover plate on the left; take out the freezing door upwards.

3. Unscrew the hinge screws, remove the middle hinge, remove the plug pins, and take

out the refrigeration door upwards.

Cover plate Top hinge cover

Plug pins Screw

Middle hinge

ATTENTION

Images show a refrigerator that opens on the left side. Your refrigerator may open on the

right side.

4. Put the refrigerator down, unscrew the lower hinge screw and adjusting foot, remove

the lower hinge, remove the lower hinge shaft and install it into the shaft hole on the

other side of the hinge.

5. Install the lower hinge and tighten the screws on the left side of the refrigerator,

install two adjusting feet, and erect the refrigerator.

Lower hinge

Adjusting foot

Screw

Remove the lower hinge, remove

the lower hinge shaft and install it

into the shaft hole on the other side

of the hinge

6. Unscrew and remove the shaft sleeves, stopper and right door self-locking screws

of the two door bodies, take out the left door self-locking from the accessory bag,

and install it to the left corner of the door body together with the stopper and shaft

sleeves. Take out the hole plug and shaft sleeve on the upper part of the refrigeration

door and adjust their positions before installing them into the door body. Take out

the shaft sleeve on the freezing door and install it on the other side.

Hole plug

Right door

self-locking

Left door

self-locking

Shaft sleeve

Stopper

Shaft sleeve

7. Install the refrigerated door on the lower hinge, install the center beam screws,

middle hinge and tighten the screws on the left side, and cover the plug pins, center

beam screws and screw caps on the right side.

Middle hinge Plug pins

Center beam screw

Screw cap

8. Install the freezing door on the middle hinge, remove the upper hinge shaft and

install it into the shaft hole on the other side of the hinge, install the upper hinge and

tighten the screws, and install the upper hinge cover and the right hole cover.

9. The door change is completed.

Hinge cover Hole cover

Remove the upper hinge shaft

and install it into the shaft hole

on the other side of the hinge.

Upper hinge

ATTENTION

The picture above is only for reference. The actual conﬁguration will depend on the physical

product or statement by the distributor.

Leveling feet

To avoid vibration, the unit must be leveled.

If required, adjust the leveling screws to compensate for the uneven ﬂoor.

The front should be slightly higher than the rear to aid in door closing.

Leveling screws can be turned easily by tipping the cabinet slightly.

Turn the leveling screws counterclockwise to raise the unit, clockwise to

lower it.

Moving the appliance

1. Remove all food from inside the appliance.

2. Pull the power plug out, insert and ﬁx it into the power plug hook at the rear or on

top of the appliance.

3. Tape parts such as shelves and the door handle to prevent from falling o while

moving the appliance.

4. Move the appliance with more than two people carefully. When transporting the

appliance over a long distance, keep the appliance upright.

5. After installing the appliance, connect the power plug into a socket outlet to switch

on the appliance.

ATTENTION

Precautions before operation:

Before making changes the refrigerator must be disconnected from power.

precautions should be taken to prevent any personal injury.

Changing the light

• Any replacement or maintenance of the LED lamps is intended to be made by

the manufacturer, its service agent or similar qualiﬁed person.

Connecting the appliance

After installing the appliance, connect the power plug into a socket outlet.

ATTENTION

After connecting the power supply cord (or plug) to the outlet, wait 2 or 3 hours before you

put food into the appliance. If you add food before the appliance has cooled completely, your

food may spoil.

Tips for energy saving

• Do not place the appliance near cookers, radiators or other heat sources. If the

ambient temperature is high, the compressor will run more frequently and for longer,

resulting in increased energy consumption.

• Ensure that there is sucient ventilation at the base of the appliance, on the sides of

the appliance and at the back of the appliance. Never cover ventilation openings.

• Please also observe the spacing dimensions in the chapter “Installation”.

• The arrangement of drawers, shelves and racks as shown in the illustration oers the

most ecient use of energy and should therefore be retained as far as possible. All

drawers and shelves should remain in the appliance to keep the temperature stable

and save energy.

• To obtain a larger storage space (e.g. for large refrigerated/frozen goods), the

middle drawers can be removed. The top and bottom drawers and shelves should be

removed last if necessary.

• An evenly ﬁlled refrigerator/freezer compartment contributes to optimal energy use.

Therefore, avoid empty or half-empty compartments.

• Allow warm food to cool before placing it in the refrigerator/freezer. Food that has

already cooled down increases energy eciency.

• Allow frozen food to defrost in the refrigerator. The coldness of the frozen food

reduces the energy consumption in the refrigerator compartment and thus increases

the energy eciency.

• Open the door only as brieﬂy as necessary to minimise cold loss. Opening the door

brieﬂy and closing it properly reduces energy consumption.

• The door seals of your appliance must be perfectly intact so that the doors close

properly and energy consumption is not increased unnecessarily.

OPERATION INSTRUCTIONS

Control Panel

LED4

LED3

LED2

LED1

Key

ASetting Button

Display

screen

LED4

LED3

LED2

LED1

ATTENTION

The actual control panel may dier from model to model.

Operating instructions

Temperature setting

• Each time the temperature setting button A is pressed once,the temperature

setting changes one time. After the temperature setting has been completed,

the refrigerator will run according to the set value after 15s.

• When Super Cool mode is activated, the fridge will run at its maximum

capacity to faster reach the coolest setting and lasting longest for 6 hours.

The shift regulation is:

(normal)

Note: The temperature of each gear is within 32 of the set temperature, and the actual

situation is slightly dierent according to the load situation.

Fault indication

• when electrify the refrigerator for ﬁrst time,the display screen shines fully for

3 seconds, and then the refrigerator runs according to coldest. In case of a failure,

the corresponding LED blinks. In case of no failures, it shows the temperature setting

of refrigerator.

Fault Code Fault Description

LED1/LED2 ﬂashing Refrigerator temperature sensor fault

LED1/LED3 ﬂashing Freezing frost sensor faults

LED1/LED4 ﬂashing Ambient temperature sensor failure

Lock/Unlock

• When the temperature control panel is in lock state, it needs to long press

temperature setting key for 3 seconds for unlocking the panel, all LEDs will blink for

2 seconds when panel is unlocked. When the temperature control panel is in unlock

state, if there is no operation on control panel within 15 seconds, it will enter into

lock state automatically.

Tips on storing food

Freezer compartment

• The freezer is designated for the storage of food frozen at very low temperature,

long-term storage of frozen food, and for the production of ice.

• Only use the shelves in the door of the freezer to store frozen food, not for storing

hot food designated for freezing.

• Do not put fresh and frozen food next to each other. The frozen food may thaw.

• When freezing fresh food (such as meat, ﬁ sh or chopped meat), cut them into parts

that can be used at the same time.

• Storing frozen food: instructions are usually stated on the packages, which must be

followed. If there is no information on the packaging, food should not be stored for

longer than three months from the date of purchase.

• When purchasing frozen food, make sure that it was frozen at a suitable temperature

and that the packaging is not damaged.

• Frozen food should be kept in suitable packages to retain the quality and should be

returned to the freezer compartment as soon as possible.

• If a package of frozen food shows moisture or abnormal bulging, it is probable that

it was stored at the wrong temperature and the content is spoiled.

• The storage period for frozen food depends on the room temperature, the

thermostat setting, the frequency of opening the door of the freezer, the type of

food and the time of transporting the product from the shop to the household.

Always follow the instructions printed on the packaging and never exceed the

maximum storage time stated on the package.

Refrigerator compartment

• To reduce moisture and subsequent ice build-up, never put liquid into the

refrigerator in unsealed containers. Frost tends to concentrate in the coolest parts

of the evaporator. Storing uncovered liquids results in a more frequent need for

defrosting.

• Never put warm foods in the refrigerator. These should ﬁ rst cool down at room

temperature and then be placed so as to ensure adequate air circulation in the

refrigerator.

• Foods or food containers should not touch the back wall of the refrigerator because

they could freeze to the wall. Do not keep regularly opening the door of the

refrigerator.

• Meat and clean ﬁsh (packed in a package or plastic foil) can be placed in the

refrigerator, which can be used in 1–2 days.

• Fruit and vegetables without packaging can be placed in the part designated for

fresh fruit and vegetables.

ATTENTION

The optimal temperature setting of each compartment depends on the ambient temperature.

Above optimal temperature is based on the ambient temperature of 25 °C.

Storage of too much food during operation after the initial connection to power may

adversely aect the freezing eect of the refrigerator. Foods stored shall not block the air

outlet; or otherwisethe freezing eect will also be adversely aected.

When store beverages at coldest setting, inside fruits and vegetables are at risk of freezing,

please set on towards less cooling if coldest setting is very cool.

CLEANING AND MAINTENANCE

Defrosting

• The refrigerator is made based on the air-cooling principle and thus has

automatic defrosting function. Frost formed due to change of season or

temperature may also be manually removed by disconnection of the appliance

from power supply or by wiping with a dry towel.

Cleaning of door tray

• According to the direction arrow in the ﬁgure

below, use both hands to squeeze the tray, and

push it upward, then you can take it out.

• After washing the tray having been taken

out, you can adjust its installing height in

accordance with your requirement.

Cleaning of glass shelf

• As the innermost part of the refrigerator liner

where contacting the shelves has a backstop,

you shall raise the shelves upward, then you can

be able to take it out.

• Adjust or clean the shelves according to your

requirement.

Cleaning the fruit and vegetable box

1. Remove the contents of the drawer. Hold the

handle of the vegetable drawer and pull it out

completely until it stops.

2. Lift the vegetable drawer up and remove it by

pulling it out.

ATTENTION

Soft towels or sponge dipped in water and non-corrosive neutral detergents are suggested

for cleaning. The freezer of shall be ﬁnally cleaned with clean water and dry cloth. Open the

door for natural drying before the power is turned on. Do not use hard brushes, clean steel

balls, wire brushes, abrasives, such as toothpastes, organic solvents (such as alcohol, acetone,

banana oil, etc.), boiling water, acid or alkaline items clean refrigerator considering that this

may damage the fridge surface and interior.

Stop using

Power failure:

In case of power failure, even if it is in summer, foods inside the appliance can be

kept for several hours; during the power failure, the times of door opening shall be

reduced, and no more fresh food shall be put into the appliance.

Long-time nonuse:

The appliance shall be unplugged and then cleaned; then the doors are left open

to prevent odor.

Moving:

Before the refrigerator is moved, take all objects inside out, ﬁx the glass partitions,

vegetable holder, freezing chamber drawers and etc. with tape, and tighten

the leveling feet; close the doors and seal them with tape. During moving, the

appliance shall not be laid upside down or horizontally, or be vibrated; the

inclination during movement shall be no more than 45°.

ATTENTION

The appliance shall run continuously once it is started. Generally, the operation of the

appliance shall not be interrupted; otherwise the service life may be impaired.

Foods can be preserved for a couple of hours even in summer in case of power failure; it is

recommended to reduce the frequency of opening door.

TROUBLESHOOTING

The following simple issues can be handled by the user. Please call the after-sale

service department if the issues are not solved.

Problem Possible reason

Failed operation

• Check whether the appliance is connected to power or

whether the plug is in well contact

• Check whether the voltage is too low

• Check whether there is a power failure or partial circuits have

tripped

Odor

• Odorous foods shall be tightly wrapped

• Check whether there is any rotten food

• Clean the inside of the refrigerator

Long-time operation

of the compressor

• Long operation of the refrigerator is normal in summer

• When the ambient temperature is high it is not suggestible

having too much food in the appliance at the same time

• Food shall get cool before being put into the appliance

• The doors are opened too frequently

Light fails to get lit

• Check whether the refrigerator is connected to power supply

and whether the illuminating light is damaged

• Have the light replaced by a specialist

Door can not be

properly closed

• The door is stuck by food packages.

• Too much food is placed

• The refrigerator is tilted

Loud noises

• Check whether the ﬂoor is level and whether the refrigerator

is placed stably

• Check whether accessories are placed at proper locations

Problem Possible reason

Door seal fails to be

tight

• Remove foreign matters on the door seal

• Heat the door seal and then cool it for restoration (or blow it

with an electrical drier or use a hot towel for heating)

Water pan overﬂows

• There is too much food in the chamber or food stored

contains too much water,resulting in heavy defrosting

• The doors are not closed properly, resulting in frosting due to

entry of air and increased water due to defrosting

Hot housing

• Heat dissipation of the built-in condenser via the housing,

which is normal when housing becomes hot due to high

ambient temperature, storage of too much food or shutdown

of the compressor is shut down, provide sound ventilation to

facilitate heat dissipation

Surface

condensation

• Condensation on the exterior surface and door seals of the

refrigerator is normal when the ambient humidity is too high.

Just wipe the condensate with a clean towel.

Abnormal noise

• Buzz: The compressor may produce buzzes during operation,

and the buzzes are loud particularly upon start or stop. This is

normal.

• Creak: Refrigerant ﬂowing inside of the appliance may

produce creak, which is normal.

Extension gratuite

de 3 mois de la période

de garantie limitée initiale!*

Envoyez simplement une

photo de votre preuve d’achat

par message texte au :

1-844-224-1614

*L’extension de garantie porte sur les trois mois

suivant immédiatement

la ﬁn de la période de garantie initiale du produit.

Les particuliers n'ont pas besoin d'enregistrer le

produit pour obtenir tous les droits et recours des

propriétaires enregistrés en vertu de la garantie

limitée d'origine.

La page charge ...

LG MRT14B3AWW Manuel utilisateur

Marque: LG

Modèle: MRT14B3AWW

Catégorie: Réfrigérateurs-congélateurs

Taper: Manuel utilisateur

Télécharger le PDF

rapport

dans d''autres langues

English: LG MRT14B3AWW User manual
español: LG MRT14B3AWW Manual de usuario

LG MRT14B3AWW Manuel utilisateur

LG MRT14B3AWW Manuel utilisateur

dans d''autres langues

Autres documents