Hisense RB605N4WC11 Le manuel du propriétaire

Contents

2

For your safety and correct usage before installing and first

using the appliance, read this user manual carefully, including

its hints and warnings. To avoid unnecessary mistakes and

accidents, it is important to make sure that all people using the

appliance are thoroughly familiar with its

operation and safety features. Save these instructions and be

sure that they remain with the appliance if it is moved or sold,

so that anyone using it throughout its life, will be properly

informed on its usage and safety notices.

For the safety of life and property, keep the precautions of

these user's instructions as the manufacturer is not

,

responsible for damages caused by omission.

Hisense Refrigerator

Safety for children and otherswho are vulnerable people

According to EN standard

According to IEC standard

This appliance is not intended for use by persons (including

children) with reduced physical, sensory or mental

capabilities, or lack of experience and knowledge, unless

they have been given supervision or instruction concerning

use of the appliance by a person responsible for their safety.

This appliance can be used by children aged from 8 years

and above and persons with reduced physical, sensory or

mental capabilities or lack of experience and knowledge if

they have been given supervision or instruction concerning

use of the appliance in a safe way and understand the

hazards involved. Children shall not play with the appliance.

Cleaning and user maintenance shall not be made by

children without supervision.

Safety and warning information.2

Description of the appliance

Display controls16

Using your appliance 18

Cleaning and care21

Troubleshooting

23

Disposal of the appliance25

Installing your new appliance

8



15

Helpful hints and tips

22



 

3

Hisense Refrigerator

suffocation.

If you are discarding the appliance, pull the plug out of the

socket, cut the connection cable (as close to the appliance

as you can) and remove the door to prevent children playing

from suffering an electric shock or from closing themselves

inside it.

If this appliance, featuring a magnetic door seals, is to

replace an older appliance having a spring lock (latch) on the

door or lid, be sure to make the spring lock unusable before

you discard the old appliance. This will prevent it from

becoming a death trap for a child.

General safety

WARNING —This appliance is intended to be used in

household and similar applications such as

-staff kitchen areas in shops, offices and other working

environments;

-farm houses and by clients in hotels, motels and other

residential type environments;

-bed and breakfast type environments;

-catering and similar non-retail applications.

WARNING — Do not store explosive substances such as

aerosol cans with a flammable propellant in this appliance.

WARNING — If the supply cord is damaged, it must be

replaced by the manufacturer, its service agent or similarly

qualified persons in order to avoid a hazard.

WARNING — Keep ventilation openings, in the appliance

enclosure or in the built-in structure, clear of obstruction.

WARNING — Do not use mechanical devices or other

means to accelerate the defrosting process, other than those

recommended by the manufacturer.

WARNING — Do not damage the refrigerant circuit.

WARNING — Do not use electrical appliances inside the

food storage compartments of the appliance, unless they are

of the type recommended by the manufacturer.

of Keep all packaging away from children a

a

s there is risk

4

Hisense Refrigerator

WARNING — The refrigerant and insulation blowing gas are

flammable. When disposing of the appliance, do so only at

an authorized waste disposal centre. Do not expose to

flame.

WARNING —When positioning the appliance, ensure the

supply cord is not trapped or damaged.

WARNING —Do not locate multiple portable socket-outlets

or portable power supplies at the rear of the appliance.

Refrigerant

The refrigerant isobutene (R600a) is contained within the

refrigerant circuit of the appliance, a natural gas with a high

level of environmental compatibility, which is nevertheless

flammable. During transportation and installation of the

appliance, ensure that none of the components of the

refrigerant circuit becomes damaged.

The refrigerant (R600a) is flammable.

WARNING

If the refrigerant circuit should be damaged:

-Avoid opening flames and sources of ignition.

-Thoroughly ventilate the room in which the appliance is

situated.

WARNING — Refrigerators contain refrigerant andgases in

the insulation. Refrigerant and gases must be disposed of

professionally as they may cause eye injuries or ignition.

Ensure that tubing of the refrigerant circuit is not damage

prior to proper disposal.

Replacing the illuminating lamps

WARNING—The illuminating lamps must not be replaced by

the user! If the illuminating lamps is damaged, contact the

customer helpline for assistance.

This warning is only for refrigerators that contain illuminating

lamps.

Risk of fire / flammable materials

:

5

Hisense Refrigerator

Daily use

Do not store flammable gass or liquids in the appliance,

There is a risk of an explosion.

Do not operate any electrical appliances in the appliance

(e.g.electric ice cream makers,mixers etc.).

When unplugging always pull the plug from the mains

socket,do not pull on the cable.

Do not place hot items near the plastic components of this

appliance.

Electrical safety

1.The power cord must not be lengthened.

2. Make sure that the power plug is not crushed or damaged.

A crushed or damaged power plug may overheat and cause a

fire.

3. Make sure that you can access the main plug of the

appliance.

4. Do not pull the main cable.

5. If the power plug socket is loose, do not insert the power

plug. There is a risk of electric shock or fire.

6.You must not operate the appliance without the interior

lighting lamp cover.

7.The fridge is only applied with power supply of single phase

alternating current of 220~240V/50Hz. If fluctuation of voltage

in the district of user is so large that the voltage exceeds the

above scope, for safety sake, be sure to apply A.C. Automatic

voltage regulator of more than 350W to the fridge. The fridge

must employ a special power socket instead of common one

with other electric appliances. Its plug must match the socket

with ground wire.

It is dangerous to alter the specifications or modify this

product in any way.

Any damage to the cord may cause a shortcircuit, fire, and/or

electric shock.

6

Hisense Refrigerator

Do not place food products directly against the air outlet on

the rear wall.

Store pre-packed frozen food in accordance with the frozen

food manufacture’s instructions.

The appliances manufactures storage recommendations

should be strictly adhered to.Refer to relrelevant instructions

for storage.

Do not place carbonated or fizzy drinks in the freeze

compartment as it creates pressure on the container,which

may cause it to explode,resulting in damage to the

appliance.

Frozen food can cause frost burns if consumed straight from

the freezer compartment.

Do not place the appliance in direct sunlight.

Keep buring candles,lamps and other items with naked

flames away from the appliance so that do not set the

appliance on fire.

The appliance is intended for keeping food stuff and/or

beverages in normal household as explained in this

instruction booklet The appliance is heavy.Care should be

taken when moving it.

Do not remove nor touch items from the freezer

compartment if your hands are damp/wet,as this could cause

skin abrasions or frost/freezer burns.

Never use the base,drawers, doors etc. to stand on or as

supports.

Frozen food must not be refrozen once it has been thawed

out.

Do not consume ice popsicles or ice cubes straight from

the freezer as this can cause freezer burn to the mouth

and lips.

To avoid items falling and causing injury or damage to

the appliance, do not overload the door racks or put too

much food in the crisper drawers.

caution!

Care and cleaning

Hisense Refrigerator

Adequate air circulation should be around the appliance,

lacking this leads to overheating. To achieve sufficient

ventilation, follow the instructions relevant to installation.

Wherever possible the back of the product should not be too

close to a wall to avoid touching or catching warm parts

(compressor, condenser) to prevent the risk of a fire, follow

the instructions relevant to installation.

The appliance must not be locate close to radiators or

cookers.

Make sure that the mains plug is accessible after the

installation of the appliance.

Service

Any electrical work required to do the servicing of the

appliance should be carried out by qualified electrician or

competent person.

This product must be serviced by an authorized Service

Center, and only genuine spare parts must be used.

1)If the appliance is Frost Free.

2)If the appliance contains freezer compartment.

Installation Important!

For electrical connection carefully, follow the instructions

given in this manual.

Unpack the appliance and check if there are damages on it.

Do not connect the appliance if it is damaged. Report

possible damages immediately to the place you bought it. In

this case retain packing.

It is advisable to wait at least four hours before connecting

the appliance to allow the oil to flow back in the compressor.

Before maintenance, switch off the appliance and disconnect

the mains plug from the mains socket.

Do not clean the appliance with metal objects, steam

cleaner, ethereal oils, organic solvents or abrasive

cleansers.

Do not use sharp objects to remove frost from the appliance.

Use a plastic scraper.



Note: Children aged from 3 to 8 years are allowed to load and

unload refrigerating appliances.(This clause applies only to the

EU region.)

7

8

Installing your new appliance

Before using the appliance for the first

time, you should be informed of the

following tips.

Warning!

For proper installation, this refrigerator

must be placed on a level surface of hard

material that is the same height as the rest

of the flooring. This surface should be

strong enough to support a fully loaded

refrigerator.

The rollers, which are not castors, should

be only used for forward or backward

movement. Moving the refrigerator

sideways may damage your floor and the

rollers.

Ventilation of appliance

In order to improve efficiency of

the cooling system and save

energy, it is necessary to

maintain good ventilation around the

appliance for the dissipation of heat. For

this reason, sufficient clear space should

be available around the refrigerator.

Suggest:It is advisable for there to be

50-70mm of space from the back to the

wall, at least 100mm from its top, at least

100mm from its side to the wall and a clear

space in front to allow the doors to open

130°. As shown in follow diagrams.

Note:

This appliance performs well within the

climate class from SN to T showed in the

table below. It may not work properly if

being left at a temperature above or below

the indicated range for a long period.

Climate class

Ambient temperature

SN +10°C to +32°C

N +16°C to +32°C

ST +16°C to +38°C

T +16°C to +43°C

Stand your appliance in a dry place to

avoid high moisture.

Keep the appliance out of direct sunlight,

rain or frost. Stand the appliance away

from heat sources such as stoves, fires or

heaters.

Leveling of appliance

For sufficient leveling and air circulating

in the lower rear section of the appliance,

the bottom feet may need to be adjusted.

You can adjust them manually by hand or

by using a suitable spanner.

To allow the doors to self-close, tilt the

top backwards by 10-15mm.

Note:





If required you may lay the refrigerator

on its back in order to gain access to the

base, you should rest it on soft foam

packaging or similar material to avoid

damaging the backboard of the

refrigerator.

There is no need to install these

accessories under normal usage.

Only under the extreme circumstances,

that is opening the door about 90 degree,

this refrigerator may take risk of tipping.

Then rubber supporting pad should be

fastened to the lower base cover to steady

this appliance.

9

1. Tilt appliance to find screw hole on the

left of lower base cover.

2. Put screw into the hole of rubber

supporting pad.

3. Make screw in alignment with the hole

on lower base cover. Fasten rubber

supporting pad to the base cover firmly by

a cross screwdriver (self-provided).

10

Reversing the door

The side at which the door opens can be

changed, from the right side (as supplied)

to the left side if required.

Warning! When reversing the door, the

appliance must not be connected to the

mains. Make sure that the plug is removed

from the mains socket.

Additional parts (in the plastic bag)

Left Hinge Left Hinge Cover

Allen Wrench(4mm) Left Middle Hinge

Left Stop Block*2 Left Door Stopper*2

Note: If required, the refrigerator may be

positioned on its back in order to gain

access to the base, it should be rested on

soft foam packaging or similar material to

avoid damaging the backboard of the

refrigerator. To reverse the door, the

following steps are recommended.

1. Stand the refrigerator upright. Open the

door to remove all door racks (to avoid

damage) and then close the door.

Caution!

slightly squeeze the door rack from two

sides towards the center and inside of

the door rack, then move it upward when

taking out the upper rack and lower rack.

2. Remove right upper hinge cover

on

top of the cabinet. Remove the 3 screws

used for fixing the right upper hinge

part (see picture below) and dismount

the upper hinge parts .

3. Remove screw cover from the

left-front corner of cabinet with flat head

screwdriver and install screw cover-right

to the right front corner. Put the upper

11

hinge cover(right) and upper hinge part

(right) into the plastic bag.

4. Remove the upper door from the

middle hinge by carefully lifting the door

straight up.

5. Place the upper door on a smooth

surface with its panel upwards.

Loosen screw and take down

part and part , Install

replacement door stopper-left

provided (in the plastic bag attached)

and left stop block to the left side

with screw . Conserve part

and with the appliance for future

reference.

6. Use the Allen wrench(provided in the

plastic bag) to loosen screws used to fix

the right middle hinge and remove right

middle hinge. Then remove the lower

door.

7. Place the lower door on a smooth

surface with its panel upwards. Loosen

screw and dismount part and

part , Install replacement door

stopper-left provided (in the plastic bag)

and left stop block to the left side with

screw . Keep part and with the

appliance for future reference.

12

8. Change screw hole covers and screw

on middle cover plate from left to right

(as shown in figure below).

9.Lie the refrigerator backwards,

Remove

(right), Remove three

self-tapping screws from the lower hinge

part(right). Loosen the lower hinge axis

then install it on the reverse hole site,

and tighten into position(change it into

left hinge part). Remove the lower hinge

part to the left-bottom corner of the

cabinet, Then fix it with 3 screws, finally

install part on the left-bottom and

right-bottom of cabinet.

10. Stand the refrigerator upright and

carefully slot the lower door onto the

lower hinge pin and hold in position.

install middle hinge-left (in the plastic

bag) ensuring the lower door in secured

in place.

11. Carefully slot the upper door onto

the middle hinge pin and hold in position.

Move the upper door to an appropriate

position, adjust left upper hinge(in the

plastic bag) and upper door, then fit the

hinge pin into the hinge hole at the top

and the door to secure the door in place.

Then fix the upper hinge part with

screws (Please carefully hold upper

door by hand when installing).

13

12. Assemble the left hinge cover

provided(in the plastic bag) to match the

hinge, install the door racks to original

position. Keep the right hinge cover with

the appliance for future reference.

16.

14

15

Description of the appliance

Note

Due to unceasing modification of our products, your refrigerator may be slightly different

from this instruction manual, but its functions and using methods remain the same.

To get the best energy efficiency of this product, please place all shelves, drawers and

baskets on their original position as the illustration above.

22

Freezer

Fridge

Handle

16

Display Controls

Use your appliance according to the following guidelines, your appliance has functions as

control panel shown in the pictures below.

Controlling the temperature

We recommend that when you start your

refrigerator for the first time, the

temperature for the refrigerator is set to

4°C and the freezer is set to -18°C. If

you want to change the temperature,

follow the instructions below.

Caution! When you set a temperature,

you set an average temperature for the

whole refrigerator cabinet. Temperatures

inside each compartment may vary from

the temperature displayed on the panel,

depending on how much food you store

and where you place them. Ambient

temperature may also affect the actual

temperature inside the appliance.

1. Fridge

Press the “ZONE” button until

the “Fridge” icon light up, then

press the “TEMP.” button to set

fridge temperature between 8°C and

2°C as needed, and control panel will

display corresponding figures

according to the following sequence.

2. Freezer

Press the “ZONE” button until

the “Freezer” icon light up, then

press the “TEMP.” button to set

freezer temperature between -14°C and

-24°C as needed, and control panel will

display corresponding figures according

to the following sequence.

3. Super Cool

Super Cool can refrigerate the

food quicker and keep food fresh

for a longer period.This is useful to

activate before inserting a large amount

of warm/room temperature food.

 Press the “MODE” button to activate

this function. The “Super Cool” icon will

be illuminated and the fridge

temperature indicator will display 2°C.

 Super Cool will automatically turn

off after 3 hours.

 When Super Cool function is on you

can turn it off by pressing the “MODE” or

setting fridge temperature. To manually

turn off the Super Cool function, the

fridge temperature setting will revert

back to the previous setting.

4. Energy saving

Press the “MODE” button to turn

on the Energy saving function,

The “Energy saving” icon will be

illuminated.

 When the Energy saving function is

on, the temperature of fridge is

automatically switched to 6°C and the

temperature of freezer is automatically

switched to -17°C.

 When Energy saving function is on

you can switch it off by pressing the

“MODE” or “TEMP.” button and the

refrigerator temperature setting will

revert back to the previous setting.

5. Super Freeze

Super Freeze will quickly lower

the temperature within the

freezer so food will freeze faster

17

than usual. This feature also helps to

keep vitamins and nutrition of fresh food

fresh for longer period.

 Press the “MODE” button to activate

this function. The “Super Freeze” icon

will be illuminated and the temperature

for the freezer is set to -24°C.

 Super Freeze will automatically turn

off after 52 hours.

 When Super Freeze function is on

you can turn it off by pressing the

“MODE” or setting freezer temperature.

To manually turn off the Super Freeze

function, the freezer temperature setting

will revert back to the previous setting.

NOTE: When you selecting the Super

Freeze function, ensure there are no

bottled or canned drinks (especially

carbonated drinks) in the freezer

compartment. Bottles and cans may

explode.

6. POWER

Press and hold the

“POWER” button for three

seconds to turn the power function on or

off. When the power function is on, the

icon lights and the display board will

show “OF”. If no buttons have been

pressed, the display board will turn off

about 1 minute later.

 If you want to turn off the power

function, make sure the display board is

lighting up. If not, you can press any

button to light up the display board.

NOTE:

When the power function is on, the

refrigerator stops cooling.

7. Door Alarm

 When the door of fridge is open over

2 minutes, the control panel will show

“dr”, and the door alarm will stop about 8

minutes later.

 To save energy, do not keep the

door open for a long time when using the

refrigerator. In case of door alarm, it can

be turned off by closing the doors.

18

Using your appliance

Your appliance has the accessories as the

Description of the appliance showed in

general, with this part instruction you can have the right way to use them. We recommend

that you read through them carefully before using the appliance.

Door rack

It is suitable for the storage of canned

liquid, bottled drinks and packed food, etc.

Do not place too many heavy things in the

racks.

Shelf in Refrigerator chamber

1.There are shelves in refrigerator

chamber, and they can be taken out to be

cleaned.

2.The crisper is suitable for storage of

vegetables and fruit, etc.

Firstly Pull the crisper out in level,

Secondly tip up it then you can take out

the crisper.

According to the opposite sequence you

can position the crisper rightly.

Freezer chamber

The freezer chamber is suitable for

storage of foods required to be frozen,

such as meat, ice.

Caution! Never close the freezer door

while the drawers, installation bracket, ice

tray are extended. It may damage the unit.

Ensure that drink bottles are not left in the

freezer for a longer time than needed as

freezing liquid may cause the bottle to

break.

Twistable ice tray

Twistable ice tray produce and store

abundant ice cubes.

1.Pull out the twistable ice tray from the

installation bracket.

2.Fill with drinking water below the

maximum level mark.

3.Place the filled ice tray back to bracket.

4.Await for around 3 hours, twist the knobs

clockwise and the ice will drop into the ice

box below.

19

Water Dispenser

The water dispenser, located in fridge door,

is used for storing drinking water. This

feature provides chilled water easily

without opening refrigerator.

You should

be informed of following tips.





Before using

Please clean the water dispenser parts

before using this appliance for the first

time.

1. Hold two sides of the water tank tightly,

then pull up the water tank carefully by

shaking up and down.

2. Unscrew the head, then clean it, and

the inside of water tank (including large lid

and small lid).

3. Dry it in natural way or using a dryer.





Assembling

After cleaning, please assemble these

parts together, with reverse sequence of

cleaning procedure; and then fit them on

the door according to the following

procedure.

1. Insert the head into the hole on the door.

2. Fit the tank along the guides on the

door.

3. Press down on the two side of the tank.

4. When you hear a click sound, that

means the installation is completed.

①

②

③

④





Filling water

Before you fill the drinking water into the

water tank, ensure that the water tank is

steady and in a correct position.

Caution!

Fill with water up to 3.5L (which is

La page charge ...

Hisense RB605N4WC11 Le manuel du propriétaire

Hisense RB605N4WC11 Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents