ProScan PSB3713-OP Manuel utilisateur

Marque: ProScan

Modèle: PSB3713-OP

Taper: Manuel utilisateur

Please read this instruction manual carefully and keep it for future reference

Bluetooth 37'' Soundbar

MODEL:PSB3713-OP

IMPORTANT SAFETY INSTRUCTIONS

DANGEROUS VOLTAGE: The lighting flash with arrowhead symbol within an

equilateral triangle is intended to alert the user to the presence of uninsulated

“dangerous voltage ” within the product ’s enclosur e that may be of sufficien t

magnitude to constit ute a risk of electr ic shock to persons.

ATTENTION: The exclamation point within an equilateral triangle is intended to

alert the user to the presence of important operating and maintenance (servicing)

instructions in the literature accompanying the appliance.

FCC STATEMENT:

This device complies with part 15 of the FCC Rules. Operation is subject to the following

two conditions:

(1)This device may not cause harmful interference, and

(2)This device must accept any interference received, including interference that may

cause undesired operation. The antenna(s) use d for this transmitter must be installed to

provide a separation distance of at least 8 ft. from all persons and must not be co-located

or operated in conjunction with any other antenna or transmitte r.

FCC NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the following

measures:

CAUTION: TO REDU CE THE ELECTRIC SHOCK, DO NOT REMOVE THE

COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. RE FER

SERVICIN G TO QUA LIFIED SER VICE PERSONN EL.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

-- Consult the dealer or an experienced radio/TV technician for help.

To assure continued operation, follow the attached installation instructions and use only

shielded cables when connecting to other devices. Changes or modifications not

expressly approved by the party responsible for compliance could void the user's authority

to operate the equipment.

WARNING:TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT

TO RAIN OR MOISTURE.

WARNING: USE UNDER SUPERVISION OF AN ADULT DUE TO LONG CORD. This

unit has a long cord that can be easily tripped on or pulled on, causing injury. Please make

sure it is arranged so that it will not drape over a tabletop, etc., where it can be pulled on

by children or tripped over accidentally.

IMPORTANT SAFETY INSTRUCTIONS

Before using the unit, be sure to read all operating instructions carefully. Please note that

these are general precautions and may not pertain to your unit. For example, this unit may

not have the capability to be connected to an outdoor antenna.

1. Read these instructions – All the safety and operating instructions should be read

before the appliance is operated.

2. Keep these instructions – The safety and operating instructions should be kept for

future reference.

3. Heed all warnings – All warnings on the appliance and in the operating instructions

should be adhered to.

4. Follow all instructions – All operation and use instr uctions sho uld be followed.

5. Do not use this apparatus near water – The appliance should not be used near water;

for example, near a bath tub, washbowl, kitchen sink, laundry tub, in a wet basement,

or near a swimming pool.

6. Clean only with dry cloth – The appliance should be cleaned only as recommended

by the manufacturer.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s

instructions. The appliance should be situated so that its location or position does not

interfere with its proper ventilation. For example, the appliance should not be

situated on a bed, sofa, rug, or similar surface that may block the ventilation

openings; or placed in a built-in installation, such as a bookcase or cabinet that may

impede the flow of air through the ventilation openings.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or

other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized

plug has two blades and a third grounding prong. The wide or the third prong are

-- Reorient or relocate the receiving antenna.

CAN ICES-3 (B)/NMB-3(B)

provided for your safety. If the provided plug does not fit into your outlet, consult an

electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the poin t where they exit from the apparatus.

11. Only use attachments / accessories specified by the manufacturer.

12. Use only with a cart, stand, tripod, bracket, or table specified by the

manufacturer, or sold with the apparatus. When a cart is used, use

caution when moving the cart/apparatus combination to avoid injury

from tip-over .

13. Unplug this apparatus during lightning storms or when unused for long periods of

time.

14. Refer all servicing to qualified service personnel. Servicing is required when the

apparatus has been damaged in any way, such as power-supply cord or plug is

damaged, liquid has been spilled or objects have fallen into the apparatus, the

apparatus has been exposed to rain or moisture, does not operate normally, or has

been dropped.

15. This appliance should not be e xposed to dripping or splashing water and no object

filled with liquids such as vases should be placed on the apparatus.

16. Power Sources – The appliance should be connected to a power supply only of the

type described in the operating instructions or as marked on the appliance. Do not

overload wall outlet.

17. Battery should not be exposed to excessive heat such as sunshine, fire, etc.

18. Replace remote contr ol battery only with the same or equivalent type.

19. Do not attempt to dismantle, open or repair this product yourself. If a problem occurs,

seek advice from your local qualified service technician or contact the distributor at

the telephone number at the back of this instruction manual.

20. Caution marking a nd nameplate are located on back or bottom of product.

PLACEMENT AND MOUNTING

1. Placing the device on table - Ventilation

When placing the Sound Bar on an entertainment center, bookshelf, or any type of

enclosed space, be sure to allow at least 2-3 inches of space around the Sound Bar for

ventilation. If the Sound Bar is enclosed in a tight space, without ventilation, heat

generated from the Sound Bar could produce a potential heat hazard.

Mounting to a wall

2.1 Mounting to a wooden wall

A. Mark the position of the mounting screws on the wall using a pencil.

B. Drill the supplied screws directly into the marks that you have made on the wall and

leave approx. 0.3 inch length to hook the sound bar.

C. Put the sound bar onto the mounting screws. Make sure they are firm and stable.

2.2 Mounting to a brick wall

A. Mark the position of the mounting screws on the wall using a pencil.

B. Drill 2 holes on wall with a powerful electric drill.

C. Insert the supplied fixing plug and hammer into the holes.

D. Secure the supplied screws into the fixing plugs and leave approx. 0.3 inch length to

hook the sound bar.

E. Put the sound bar onto the mounting screws. Make sure they are fir m and stable.

24.9 inches

Vol+Vol-

FM Scan

Standby

/Source

LOCATION OF CONTROLS:

Front View

Rear View

Top View

Standby

/Source

FM Scan

Vol-

Vol+

AUX 2

AUX 1

L R

DC 12V,2.0A

ANT

1. Indicator

2. Remote sensor

3. Speaker

4. Antenna

5. AUX 2

7. AUX 1

8. DC IN jack

9. Standby/Source

button

10. FM Scan button

11. Volume down button

12. Volume up button

6. OPTICAL

Audio Input

OPTICAL

REMOTE CONTROL

BATTERY (included)

- Before Using the Remote Control:

Remove the plastic tab as picture on the right.>>>

- To Replace battery

2. Replace the battery with a new CR2025 button cell with the polarity (+) side upward.

Slide into the battery holder.

Battery precautions

Fig.1 Fig.2

Fig.3

1. Push and slide out the battery door.(See pictures below.)

1. STANDBY button

2. VOL(Volume) - button

3. SOURCE button

(Previous)/ TUNE- bu tt on

/ MO/ST(mono/stereo) button

10.

(Mute) button

14.

(Next) / TUNE + button

STANDBY

PAIR

TUNE-

TUNE+

MO/ST

7. EQ (Equalizer) button

11. VOL (Volume) + button

BASS -

BASS +

TREBLE -

TREBLE +

4. BASS down button

12. BASS up button

13. TREBLE up button

6. TREBLE down button

5. PAIR button

it can cause severe internal burn in just 2 hours and can lead to death. Keep new and

used batteries away from children. If the battery compartment does not close securely,

or placed inside any part of the body, seek immediate medical attention.

Follow these precautions when using a battery in this device:

1. Use only the size and type of battery specified.

2. Be sure to follow the correct polarity when installing the battery as indicated in the battery

compartment. A reversed battery may cause damage to the device.

3. Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc ) or old

batteries with fresh ones.

4. If the batteries in the device are consumed or device is not to be used for a long period of

time, remove the batteries to prevent damage or injury from possible battery leakage.

( Follow battery manufacturer's instructions.)

6. The batteries shall not be exposed to excessive heat such as sunshine, fire or the like.

7. Clean the battery contacts and also those of the device prior to battery installation.

This product contains a coin/button cell battery. If the coin/button cell battery is swallowed,

Warning: Do not ingest battery, Chemical Burn Hazard.

stop using the product and keep it away from children. If you think batteries might have

been swallowed

5. Do not try to recharge the battery not intended to be recharged; it can overheat and

rupture.

GENERAL OPERATION

1. Connect the AC/DC adapter to the unit and wall outlet. The red indicator will

light but unit is OFF and in standby mode.

the remote control repeatedly to switch to desired mode. The color of the

Indicator will turn to:

~ Press the VOL ( Volume ) + or - buttons on the unit or Remote Control to

adjust volume level as desired.

~ Press the EQ button on the Remote Control repeatedly to select and set

equalizer mode as desired.

~ Press the

( Mute ) button on the Remote Control to turn off the sound. Press

again to resume.

unit or press the button on the Remote Control to power OFF the unit and

put in standby mode.

Green.........................................................................FM Radio

Violet...............................................................................AUX 1

Orange............................................................................AUX 2

Blue............................................................................Bluetooth

2. Press the Standby/Source button on the unit or press the SOURCE button on

3. During Playback:

4. When finished listening, press and hold the Standby/Source button on the

~ Press the BASS +/- buttons on the Remote Control to adjust the sound

level of bass.

~ Press the TREBLE +/- buttons on the Remote Control to adjust the sound

level of treble.

Indigo.............................................................................Optical

FM RADIO OPERATION

automatically.

4.To search the band automatically:

3.To search the band manually:

Before listening to the radio, please unwind and extend FM antenna or relocate

the unit to get better reception.

back and forth

Press the /TUNE + or /TUNE - button to search the bands back and

forth manually.

Press the FM Scan button on the unit to search the bands automatically, when

a band searched, it will stop and play the station.

when a band searched, it will stop and play the station.

1. Power ON the u nit as previously explained.

2. Press the Standby/Source button on the unit or press the SOURCE button

on the remote control until the indicator turns Green.

Press and hold the /TUNE + or /TUNE - button to on the remote

control search the bands

5. If the available FM station is stereo, the unit will plays it in stereo mode

automatically.

If the reception is no good, press the MO/ST button on the

Remote Control to switch it

to Mono mode. Press again to turn back to

Stereo mode.

BLUETOOTH PAIRING AND CONNECTION

For first time use or re-pairing, pair the unit to an external Bluetooth (BT) device

as follows:

1. Power ON the u nit as previously explained.

on the R emote C ontrol repeatedly until the color of the Indicator turns to Blue.

3. Power ON the external BT Device and select Bluetooth to enter into search

touch scan button on the BT device or see instructions on the external BT De vice.

After paire d, the Blue Indicator will stop blin king.

( For details on pairin g procedures, plea se refer to the u se r's m a nua l of your BT

Device.)

4.If you want to connect another BT device

while

playing, press "PAIR" Button on

remote contro l to disconnect pairing, then try to connect the other BT device

following above steps.

NOTE:

1. When the external BT Device searches the unit, our model number

2. If the BT device asks for a password, input pairing code "0000" to confirm it to

Normal operation after paired:

1. Power on the unit and select the playback source to BT as previously

explained.

2. Turn on the BT function of the external BT Device.

Device automatically. The Blue indicator will stop blinking.

4. Play the music in the connected BT Device as usual.

5. During playback:

~ Press the

Press again to resume normal playback.

connect to "PROSCAN".

"PROSCAN" will appear on the display of the external BT device.

mode. When PROSCAN appears, click it to start pairing. If PROSCAN doesn't appear,

3. Touch PROSCAN and wait a few seconds until the unit pairs to the external BT

2. Press the Standby/Source button on the unit or press the SOURCE button

Press the /TUNE + or /TUNE - button to skip the tracks.

button on the remote control to pause.

An external (Auxiliary) audio source (ie.,personal CD player or MP3 player) can

be connected to this unit and heard through the speakers.

2.Plug the other end of theAux In cable into headphone or line out socket of the

external audio source.

3. Power on the unit as previously explained.

5. Power on the connected external player and start playback as usual.

Audio

Player

To Audio Out Jack

Rear view of the unit

1. Plug one side of the Aux In cable into the AUX 2 jack on the rear

of the unit.

AUX 2: TO DEVICE

on the Remote Control repeatedly until the color of Indicator turns to

4. Press the Standby/Source button on the unit or press the SOURCE button

Orange.

EXTERNAL LISTEN AUDIO

AUX 2

AUX 1

L R

DC 12V,2.0A

ANT

OPTICAL

3. Power ON the unit as previously explained.

on the Remote Control repeatedly until the color of Indicator turns to

5. Power ON the connected external player and start playback as usual.

An external Video/Audio player (such as TV, DVD player, VCR, etc.) can be

connected to this unit and heard through the speakers.

2. Plug the other side of cable into Audio Out R & L jacks of the TV or external

device as the illustration below.

NOTE: Make sure to connect to AUDIO OUT. If you connect it into AUDIO IN of

external device, you will not hear the sound.

Rear view of the unit

1. Plug one side of RCA White and Red cable into the AUX 1 jacks on the rear

of the unit.

4. Press the Standby/Source button on the unit or press the SOURCE button

Violet.

AUX 1: TO TV/DVD/VCR/DVR LISTEN

AUX 2

AUX 1

L R

DC 12V,2.0A

ANT

Audio out jacks of

TV/DVD/VCR/DVR

OPTICAL

TV; DVD player; BD player... etc.

2. Power on the unit as previous procedures.

3. Press the Standby/Source button on the unit or press the SOURCE button on the

Remote Control repeatedly until the Indicator turns to Indigo.

4. Power on the connected external player and start playback the Music as usual.

1. Connect the Optical out jack from the external audio Player (such like TV, DVD Player

BD Player …etc.) to the OPTICAL IN jack on the top of unit by the Optical Connection

Optical Connection Cable ( not supplied )

Cable (not supplied) as the figure below: ( F or PCM format only )

Turn on the digital audio output and set it to PCM (Plus Code Modulation) type

similar to the follows figure:

Bass

Treble

Balance

Select

Move

Exit

Sound Mode Standard

Surround Off

AVL Off

Audio Language English

Picture

Time

Setup

Lock

Off

AudioAudio

Digital Output PCMDigital Output PCM

OPTICAL DIGITAL AUDIO IN

Rear view of the unit

AUX 2

AUX 1

L R

DC 12V,2.0A

ANT

OPTICAL

TROUBLESHOOTING GUIDE

PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION

No power Power AC/DC Adapter

not connected

Connect the power AC/DC adapter

to the u nit or wall outlet.

on the unit or

button on the Remote

Control to turn on the unit from

Standby mode.

No sound Volume in minimum position Raise volume level by pressing the

VOL (Volume) + button.

The paired/connected device is not in

playback mode

Play music/movie in the paired/

connected device as usual and make

sure the volume level of it is in high

level.

on the unit or SOURCE button on the

Remote Control repeatedly to set the

input source to the desired mode.

Sound distortion/rattle

Volume level too high Reduce the volume level by pressing

the VOL (Volume ) - button.

Reduce the volume level of the

paired/connected device.

Remote Control not working The battery is weak Replace with new battery.

Bluetooth

reception failure

The external device is too far from the

unit

Put the external BT device close to the

unit.

Have not paired Pair the unit with the BT Device as the

procedures stated in this manual.

Input source incorrect

Press the Standby/Source button

The unit is in standby mode

GENERAL SPECIFICATIONS

Power Input..................................................................AC 100-240V~; 50/60Hz

Power Output................................................................. DC12V 2A

Audio Power.............................................................................................10Wx2

Bluetooth Effective Range in Open Area.........................................Up to 32 feet

Remote Effective Range..................................................................Up to 16 feet

1 x AC/DC Adapter

1 x Remote Control

1 x Stereo Audio Connection Cable with 3.5mm stereo plugs

1 x RCACable

1 x User's Manual

2 x Plastic Inserts (For Wall Mount)

2 x Metallic Screws (For W all Mount)

SPECIFICATIONS AND ACCESSORIES ARE SUBJECT TO CHANGE

WITHOUT NOTICE

is a trademark on a registered trademark of Bluetooth

SIG Inc. All other trademarks and trade names are

those of their respective owners.

FM Frequency.............................................................................87.5-108.0MHz

Barre de son Bluetooth 37"

Lisez ce mode d'emploi avec attention, et conservez-le pour référence future.

MODÈLE : PSB3713-OP

IMPORTANTES MESURES DE SÉCURITÉ

ATTENTION

RISQUE DE CHOC ÉLECTRIQUE

NE PAS OUVRIR

ATTENTION : AFIN DE RÉDUIRE TOUT RISQUE DE CHOC ÉLECTRIQUE, NE PAS

RETIRER LE BOITIER (NI LA PARTIE ARRIÈRE). AUCUNE PIÈCE REMPLAÇABLE PAR

L'UTILISATEUR. VEUILLEZ CONTACTER LE PERSONNEL QUALIFI É EN CAS DE

DÉFAILLANCE.

VOLTAGE DANGEREUX : Le symbole d'éclair avec une flèche, à l'intérieur d'un

triangle équilatéral, indique à l'utilisateur la présence de « voltage dangereux » non isolé à

l'intérieur de l'appareil, qui pourrait être suffisant pour constituer un risque de choc électrique.

ATTENTION : Le point d'exclamation dans un triangle équilatéral attire votre

attention sur des points importants de ce manuel concernant l'utilisation ou l'entretien de

l'appareil.

DÉCLARATION DE LA FCC :

Ce dispositif est conforme à l'article 15 des règles de la FCC. Son utilisation est sujette aux

deux conditions suivantes :

(1) Ce dispositif ne doit pas provoquer d’interférences dangereuses, et

(2) Ce dispositif doit accepter toute interférence reçue, y compris les interférences pouvant

provoquer un fonctionnement indésirable. L'antenne(les antennes) utilisée(s) pour ce

transmetteur doit (doivent) être installée(s) de manière à se trouver à une distance d'au moins

2,5 mètres des personnes et ne doit pas être co-installée ou fonctionner en conjonction avec

une une autre antenne ou transmetteur.

Remarque relative à la FCC :

Cet équipement à été testé et est conforme aux limites d'un appareil de Classe B, selon

l'article 15 des Règles FCC. Ces limites ont étés mises en place pour offrir une protection

raisonnable contre les interférences dans un complexe résidentiel. Cet équipement génère,

utilise et contient de l'énergie de fréquence radio, si inutilisé incorrectement pourrait créer des

interférences dangereuses pour les communications radio. Mais il n'existe aucune garantie

que des interférences ne seront pas produites dans une installation particulière. Si cet

équipement crée des interférences pour la réception radio ou télévisuelle, ce qui peut être

constaté en l'allumant et en l'éteignant, alors il vous est conseillé d'y remédier d'une des

manières suivantes :

--Réorientez ou déplacez l'antenne réceptrice.

--Augmentez la distance entre l'équipement et le récepteur.

--Connectez l'équipement à une prise ou circuit différent de celui du récepteur.

--Prenez conseil auprès du revendeur ou d'un technicien qualifié pour obtenir de l'aide.

Pour s'assurer d'une conformité continue, suivez les instructions ci-inclus et utilisez

uniquement des câbles blindés lors de branchement à d'autres appareils. Tout changement

ou modification effectuée sans l'approbation de l'organisation responsable de la garantie

qualité de l'équipement pourrait révoquer vos droits d'utilisation de cet équipement.

AVERTISSEMENT : POUR RÉDUIRE LES RISQUES D'INCENDIE OU DE CHOCS

ÉLECTRIQUES, N'EXPOSEZ PAS L'APPAREIL À LA PLUIE NI À L'HUMIDITÉ.

AVERTISSEMENT : UTILISER SOUS LA SUPERVISION D'UN ADULTE À CAUSE DU

LONG CORDON D'ALIMENTATION Cet appareil est muni d'un long cordon d'alimentation

qui peut être facilement être tiré et faire trébucher, causant des blessures. S'assurer que le

cordon ne pend pas en bordure d'une table, etc. où il pourrait être tiré par des enfants ou sur

lequel on pourrait trébucher accidentellement.

CONFORMITÉ À L'INDUSTRIE DU CANADA

CAN ICES-3 (B)/NMB-3(B)

IMPORTANTES MESURES DE SÉCURITÉ

Avant d'utiliser l'appareil, veuillez vous assurer de lire attentivement les instructions. Veuillez

remarquer que ce sont des précautions générales et pourraient ne pas s'appliquer à votre

appareil. Par exemple, cet appareil pourrait ne pas avoir la capacité d'être branché à une

antenne extérieure.

1. Lisez les instructions - toutes les instructions de sécurité et d'utilisation doivent être lues

avant de commencer à utiliser ce produit.

2. Conservez ces instructions - les instructions de sécurité et d'utilisation doivent être

conservées pour référence future.

3. Respectez les avertissements - tous les avertissements présents sur le produit ou dans le

manuel doivent être respectés.

4. Respectez les instructions - toutes les instructions d'utilisation doivent être respectées.

5. Ne pas utiliser l'appareil à proximité de l'eau - par exemple à proximité d'un bain, d'un évier,

d'une machine à laver, dans un sous-sol humide, près d'une piscine, etc.

6. Nettoyer à l'aide d'un chiffon sec – l'appareil ne doit être lavé que de la manière décrite

dans ce mode d'emploi par le fabricant.

7. Ne pas bloquer les ouvertures d'aération. Installer selon les instructions du fabricant.

Installez l'appareil de manière à ne pas gêner son aération correcte. Par exemple, l'appareil

ne doit pas être installé sur un lit, un sofa, un tapis ou une surface similaire susceptible d'en

obstruer les ouvertures d'aération. Il ne doit également pas être installé à l'intérieur d'un

environnement fermé comme une librairie ou un placard qui pourrait en gêner l'aération

correcte.

8. Ne pas installer près d'une source de chaleur telle qu'un radiateur, une cuisinière ou tout

autre appareil (y compris un amplificateur) qui produit de la chaleur.

9. N'essayez pas de contourner les caractéristiques de sécurité d'une prise polarisée ou

comportant une mise à la terre. Une prise avec mise à la terre possède deux lames et une

troisième broche de mise à la terre. La large lame ou troisième broche est présente pour

votre sécurité. Si la prise fournie ne peut être insérée dans votre prise murale, contactez un

électricien pour faire remplacer la prise obsolète.

10. Ne placez pas le cordon d'alimentation là où il risque d'être écrasé ou plié, principalement

près des prises, prises murales ou au point de sortie de l'équipement.

11. N'utilisez que des accessoires ou des attachements certifiés par le

fabriquant.

12. Utilisez uniquement le chariot, le trépied, le suppor

ou la table spécifiés

par le fabricant, ou vendu avec l'appareil. Lorsqu'un chariot est utilisé, faire

attention lors du déplacement de la combinaison chariot/appareil afin d'éviter

toute blessure lors d'un basculement.

13. Débrancher cet appareil durant les orages ou lorsqu'il est inutilisé pendant une longue

périodedetemps.

14. Faites appel au personnel qualifié pour tout besoin de réparation. Une réparation est

nécessaire lorsque l'appareil a été endommagé de quelque façon, tel que cordon

d'alimentation ou fiche endommagé, liquide renversé ou objets tombés dans l'appareil,

appareil exposé à la pluie ou à l'humidité, appareil ne fonctionne pas normalement, ou s'il a

été échappé.

15. Ne pas exposer l'appareil à des égouttements ou éclaboussures, et ne placez jamais de

conteneurs de liquides comme des vases sur le dessus de l'appareil.

16. Sources d'alimentation – veiller à ce que la prise utilisée pour alimenter l'appareil

présente les caractéristiques correctes telles qu'indiquées sur l'appareil. Ne pas surcharger

les prises murales.

17. N'exposez pas batterie à des chaleurs extrêmes en la plaçant au soleil, près d'un feu ou

similaire.

18. Remplacez-les avec un modèle identique.

19. Ne pas tenter de démonter, ouvrir ni réparer l'appareil par vous-même. En cas de

problème, prenez contact avec un technicien professionnel ou avec le distributeur de

l'appareil en appelant le numéro de téléphone indiqué à la fin du mode d'emploi.

20. Les avertissements sont indiqués sur la partie arrière ou en dessous du produit.

La page est en cours de chargement...

ProScan PSB3713-OP Manuel utilisateur

Marque: ProScan

Modèle: PSB3713-OP

Taper: Manuel utilisateur

Télécharger le PDF

rapport

dans d''autres langues

English: ProScan PSB3713-OP User manual

ProScan PSB3713-OP Manuel utilisateur

ProScan PSB3713-OP Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents