Bosch Benchmark SHE7PT52UC Mode d'emploi

Dishwasher

en

Operating instructions

Guide d’Utilisation

fr

Lave Vaisselle

9000838753 Rev. A (9302)

1

2

Dear Valued Customer,

Thank you for selecting a Bosch® dishwasher. You have joined the

many consumers who demand quiet and superior performance from

their dishwashers.

This manual was written with your safety and convenience in mind,

and the information contained herein is very important. We highly

recommend that you read this manual before using your dishwasher

for the first time.

To learn more about your dishwasher and available accessories, as

well as many other top quality Bosch appliances, visit our web site at:

www.bosch-home.com/us (USA)

or

www.bosch-appliances.ca (Canada)

While there, don’t forget to register your new dishwasher by clicking

on the Customer Support tab or filling out the product registration

card enclosed with your new unit.

If you have any questions or comments, please contact us by phone at:

1-800-944-2904

or write us at:

BSH Home Appliances Corporation

1901 Main Street

Irvine, CA 92614

Table of Contents

Important Safety Instructions............................................3-5

Dishwasher Components....................................................5-6

Dishware Materials............................................................6-7

Loading the Dishwasher.....................................................7-8

Loading the Silverware Basket..............................................9

Rack Accessories.............................................................9-11

Adding Detergent, Rinse Aid and Salt.............................11-14

Dishwasher Cycles and Options..........................................15

Wash Cycle Information......................................................16

Operating the Dishwasher..............................................17-19

Care and Maintenance....................................................20-21

Self Help........................................................................22-25

Customer Service...............................................................25

Statement of Limited Product Warranty.........................26-27

3

IMPORTANT SAFETY INSTRUCTIONS: Please

READ and SAVE this information

WARNING

Misuse of the dishwasher can result in serious injury or death. Do not use

the dishwasher in any way not covered in this manual or for any purpose

other than those explained in the following pages.

Severe product damage and/or injury could result from the use of

unqualified service technicians or non-original replacement parts. All

repairs must be performed by a qualified service technician using only

original equipment factory replacement parts.

Electrical shock or fire could result if the electrical supply for the

dishwasher covered in this manual is incorrectly installed or if the

dishwasher has been improperly grounded. Do not use the dish-

washer covered in this manual unless you are certain the electrical

supply has been correctly installed or the dishwasher has been prop-

erly grounded.

Never use harsh chemicals to clean your dishwasher. Some chloride-

containing products can damage your dishwasher and may present

health hazards!

Only sanitizing cycles have been designed to meet the requirements

of 6 for soil removal and sanitation efficacy. There is no intention,

either directly or indirectly, to imply that all cycles on a certified

machine have passed the sanitization performance test.

NOTICE

Never use steam cleaning products to clean your dishwasher. The

manufacturer will not be liable for the possible damages or conse-

quences.

It is highly recommended for the end user to become familiar with the

procedure to shut off the incoming water supply and the procedure to

shut off the incoming power supply. See the Installation Instructions or

contact your installer for more information.

NSF/ANSI 184 Certified residential dishwashers are not intended for

licensed food establishments.

4

WARNING: To reduce the risk of fire, electrical

shock, or serious injury, observe the following:

1 This dishwasher is provided with Installation Instructions and this

Use and Care Manual. Read and understand all instructions before

using the dishwasher.

2 This appliance must be grounded to a metal, permanent wiring

system, or an equipment grounding conductor must be run with

the circuit conductors and connected to the equipment grounding

terminal or lead on the dishwasher. See the Installation Instruc-

tions included with this dishwasher for more information on elec-

trical requirements.

3 Use this dishwasher only for its intended function, which is the

washing of household dishware and kitchenware.

4 Use only detergents or rinsing agents recommended for use in a

dishwasher, and keep them out of the reach of children.

5 When loading items to be washed:

• Locate sharp items so they are not likely to damage the door seal.

• Load knives and other sharp utensils with their HANDLES UP

to reduce the risk of cut-type injuries.

• Do not wash plastic items unless they are marked “dishwasher

safe” or the equivalent. For plastic items not so marked, check

the manufacturer’s recommendations.

• Do not operate your dishwasher unless all enclosure panels

are in place.

• Do not tamper with or override controls and interlocks.

6 Do not abuse, sit or stand on the door or dish racks of the dish-

washer.

7 To reduce risk of injury, do not allow children to play in or on the

dishwasher.

8 When children become old enough to operate the appliance, it is

the legal responsibility of the parents/legal guardians to ensure

the children are instructed in safe practices by qualified persons.

9 Under certain conditions, hydrogen gas may be produced in a hot

water system that has not been used for two weeks or more. Hydro-

gen gas is explosive. Before using a dishwasher that is connected to

a hot water system that has been unused for two weeks or longer,

turn on all hot water faucets and let the water flow from each for

several minutes. This will release any accumulated hydrogen gas. As

the gas is explosive, do not smoke or use an open flame during this

time.

10 Remove the dishwasher door to the washing compartment when

removing an old dishwasher for service or discarding.

11 To avoid floor damage and possible mold growth, do not allow

wet areas to remain around or under the dishwasher.

12 Protect your dishwasher from the elements. Protect against freez-

ing to avoid possible damage to the fill valve. Damage caused by

freezing is not covered by the warranty.

5

13 This appliance must be grounded. In the event of a malfunction or

breakdown, grounding will reduce the risk of electric shock by

providing a path of least resistance for electric current. This appli-

ance is equipped with a cord having an equipment-grounding con-

ductor.

• Improper connection of the equipment-grounding conductor

can result in risk of electric shock. Check with a qualified

electrician or service representative if you are in doubt

whether the appliance is properly grounded.

•

Dishwasher Components

* “x” can be any number or letter

Wash Cycles

Model Heavy Auto Glass Normal Express Rinse

SHE7PT5xUC*

SHE8PT55UC

SHP7PT55UC

SHV7PT53UC

SHX7PT55UC

SHX8PT55UC

Additional Features

Model Delay

Speed

Perfect™

Half

Load

Delicate Sanitize

3rd

Rack

Time

Light®

SHE7PT5xUC*

SHX8PT55UC

SHE8PT55UC

SHP7PT55UC

SHV7PT53UC

SHX7PT55UC

State of California Proposition 65 Warnings:

WARNING: This product contains one or more chemicals known to the

State of California to cause cancer.

WARNING: This product contains one or more chemicals known to the

State of California to cause birth defects or other reproductive harm.

6

Dishware Materials

Note: Before using your dishwasher for the first time, check the information in

this section. Some items are not dishwasher safe and should be hand washed;

others require special loading.

Recommended

Aluminum: Colored anodized aluminum may fade over time. Minerals in

your water may cause the aluminum to darken or spot. This can usually be

removed with a soap-filled steel wool pad.

China, Crystal, Stoneware: Some hand-painted utensils may discolor, fade

or spot. Hand wash these utensils. Position fragile glassware so that it will

not topple over or come in contact with other utensils during the wash cycle.

Glass: Milk glass may discolor or become yellow.

Non-stick Coatings: Apply a light coating of vegetable oil to non-stick sur-

faces after drying.

Plastics: Make sure the plasticware is dishwasher safe.

Stainless Steel, Sterling Silver and Silver Plates: Load these so they do

not come in contact with other metals.

Top rack

Bottom rack

Silverware

basket

Bottom rack

spray arm

Filter system

Top rack

spray arm

3rd Rack

Detergent

Rinse aid

dispenser

7

Not Recommended

Acrylic: Crazing or small cracks throughout the acrylic, may occur.

Adhesive-Joined Pieces: Adhesives that join materials such as plastic,

wood, bone, steel copper, tin, etc. may loosen.

Bone-Handled Utensils: Handles may separate.

Iron: Iron will rust. Hand wash and dry immediately.

Non-Dishware Items: Your dishwasher is intended for use in cleaning ONLY

standard household dishware and kitchenware.

Pewter, Brass, Bronze: These items will tarnish. Hand wash and dry immedi-

ately.

Tin: Tin will stain. Hand wash and dry immediately.

Wood: Wooden bowls, wooden utensils and utensils with wooden handles

can crack, warp and lose their finish.

Loading the Dishwasher

Do not pre-wash items with loosely attached soiling. Remove all food parti-

cles, bones, toothpicks and excessive grease. Items having burned-on,

baked-on or starchy soils may require some pretreatment. Refer to the

Dishware Materials section for more information about dishware suitability.

Load only dishwasher safe items into the dishwasher. Load dishes in the

dishwasher racks so the insides of bowls, pots and pans are facing the

spray arms. Avoid nesting and contact points between dishes. Separate

items of dissimilar metals.

Loading the Top Rack

Ensure items do not protrude through the bottom of the racks and block

the spray arms.

Note: When pushing the top rack into the dishwasher, push it until it stops

against the back of the tub so the top rack spray arm connects to the water

supply at the back of the tub. Do not push racks in using the door.

Loading the Bottom Rack

Place large items in the bottom rack. Load pots, pans and bowls upside

down. Do not block vent with tall baking sheets. Load these items on the

left side of the dishwasher.

Unloading the Dishwasher

When unloading the dishwasher it is best to unload the bottom rack first.

Next, unload the silverware basket followed by the top rack.

NOTICE

To avoid dishwasher damage, do not load the dishwasher with paper

products, plastic bags, packing materials or anything other than normal,

dishwasher safe dishware and kitchenware.

8

Suggested Loading Pattern

Top Rack

Bottom Rack

3rd Rack

Top Rack

Additional Loading Pattern

Bottom Rack

3rd Rack

9

4

43

22

4

43

22

Loading the Silverware Basket

Place knives and sharp utensils with their HANDLES UP and forks and

spoons with their handles down. If large or oddly-shaped items are

loaded in the silverware basket, be sure they do not nest together.

WARNING

The sharp points and edges of knives and other sharp utensils can cause

serious injury. Load knives and other sharp utensils with edges down. Do

not allow children to handle or play near knives and sharp utensils.

The Duo-Flex Silverware Basket

To split the Duo-Flex Silverware Basket

Grasp the basket and slide the two halves in opposite

directions as shown at right and then pull the two

halves apart.

Loading pattern for Duo-Flex Silverware Basket

The basket lid may also be snapped to the handle in

order to leave the basket open.

Rack Accessories

Flip Tines

The racks consist of tines that can be folded down

depending on what you may need to load in the

rack. To fold down, grasp the folding tine and re-

lease from notch. Push folding tine downward to

desired position as shown in Figure 1.

Figure 1





12345

6

7

1- salad fork

2- teaspoon

3- dinner fork

4- knife

5 - tablespoon

6 - serving spoon

7 - serving fork

This basket splits along its length, resulting in two halves

that may be placed in a variety of positions in the lower

rack, greatly increasing the lower rack’s loading versatil-

ity. The basket snaps together either back to back or end

to end as shown.

10

3-Step RackMatic®

The height of the upper rack can be adjusted in 3

steps to create more space.

1 Pull the top rack out of the dishwasher until it

stops.

2 To lower the rack, push the lever inward.

3 To raise the rack, hold the basket on the sides

of the upper rack and lift up.

3rd Rack

The 3rd Rack horizontally positions knives, spatu-

las and other oversized tools for improved clean-

ing and easier loading and unloading. Arrange

cutlery in 3rd Rack as illustrated in Figure 3.

Plastic Item Clips

Light-weight plastic accessories (cups, lids, etc.) can

be held securely by the plastic item clips. See Figure 4.

Cup Shelves

The shelf and the space underneath

can be used for small cups or for

larger serving utensils.

Figure 2

Figure 3

Figure 4

&/,&.

Figure 5

11

Figure 6

Extra Tall Item Sprinkler

If an item is too tall to be placed in the bottom

rack even with the top rack in the raised posi-

tion, remove the empty top rack by pulling it out

of the dishwasher until it stops. Pull the front of

the rack upward and outward until the rollers are

completely free of the roller guides.

Set the top rack aside and push the roller guides

back into the dishwasher. Insert the Extra Tall

Item Sprinkler into the top rack spray outlet and

turn the sprinkler clockwise to lock into position.

See Figure 6.

Note: Keep the vent on the tub’s right side clear by plac-

ing tall items such as plastic cutting boards and tall

baking sheets on the bottom rack’s left side or center.

NOTICE

To avoid dishwasher damage, do not reinstall the

top rack without removing the Extra Tall Item Sprin-

kler.

Adding Detergent, Rinse Aid and Salt

Detergent

Use only detergent specifically designed for dishwashers. For best

results, use fresh powdered dishwashing detergent or detergent tabs.

NOTICE

To avoid dishwasher damage, do not use hand dishwashing products in

your dishwasher.

To avoid dishwasher damage, do not use too much detergent if your water is

soft. Using too much detergent with soft water may cause etching in glassware.

This dishwasher uses less water than most, therefore, less detergent is

required. With soft water, 1 tablespoon (15ml) of detergent will clean most

loads. The detergent dispenser cup has lines that measure detergent to 1

tablespoon (15ml) and 1.75 tablespoons (25ml). 3 tablespoons (45ml) of

detergent will completely fill the detergent dispenser.

Note: If you do not know the hardness of your water supply, use 15ml of

detergent. Increase the amount if necessary to the least amount required

to get your kitchenware clean.

Use the measuring lines in the detergent dispenser cup as a guide to

measure the amount of detergent recommended in Table 1.

12

Adding Detergent

• 1 tablespoon (15ml) will clean most loads.

• Do not over fill the detergent dispenser.

• When using detergent tabs, lay them such

that they do not come in contact with the

cover.

To Close

• Place finger as shown in Figure 8.

• Slide door closed and press down firmly

until it clicks.

To Open

• Push the button as shown in Figure 9.

Cover will slide open.

Rinse Aid

To achieve proper drying, always use a liquid

rinse aid, even if your detergent contains a rinse

aid or drying additive.

Note: The dishwasher indicates low rinse aid by

turning on the “Add Rinse Aid” indicator light. If

this light is on, you need to refill the rinse aid dis-

penser by following the directions below.

Adding Rinse Aid

1 Add liquid rinse aid to the dispenser until it is full (see Figure 10).

2 Close the lid. Lid must be fully closed until it clicks in order to

seal.

3 Wipe up any excess rinse aid that may have puddled when the dis-

penser reservoir is full.

The indicator light will go out a few moments after the dishwasher door is shut.

See below for instruction on how to adjust the amount of rinse aid dispensed.

Table 1 - Recommended Detergent Amount

Wash

Cycle

Hard Water/

Heavy Soil

Medium Water/

Medium Soil

Soft Water/

Little Soil

Heavy

45ml

(3tbsp)

45ml

(3tbsp)

25-45ml

(1.75-3tbsp)

Auto

25-45ml

(1.75-3tbsp)

25ml

(1.75tbsp)

15-25ml

(1-1.75tbsp)

Glass

25ml

(1.75tbsp)

15-25ml

(1-1.75tbsp)

15ml

(1tbsp)

Normal

25-45ml

(1.75-3tbsp)

25ml

(1.75tbsp)

15-25ml

(1-1.75tbsp)

Express

25ml

(1.75tbsp)

15-25ml

(1-1.75tbsp)

15ml

(1tbsp)

Rinse none none none

Figure 8

Figure 7

Figure 9

Figure 10

7EVS0D[

7EVSPO

7EVSPO

13

Setting the amount of rinse aid used

The amount of rinse aid dispensed can be set from “r:00” to “r:06”.

1 Press the [On/Off] button.

2 Hold down the “A” button (see page 17) and press [Start] until the

display indicates “d:00”. Release both buttons.

3 Press the “A” button until the display shows “r:05”.

4 Press the “C” button to select the desired setting.

“r:00” = dispenser is OFF

“r:01” = lowest setting

“r:02” = low setting

“r:03” = medium setting

5 Press [Start] to save the setting.

Note: Using rinse aid and setting the dispenser to “r:00” may result in longer

cycle times.

Salt

Your dishwasher requires soft water to ensure proper washing results

and is equipped with an internal water softening system. However, if you

have a household water softening system, the internal system provided

is not needed.

For the water softening system to function properly, it will need to use the

dishwasher water softening salt. The amount of salt dispensed can be set

from “H:00” to “H:07”. Salt is not required at H:00 (this is the default factory

setting). The amount of salt required depends on the degree of hardness of

your tap water. See Hard Water and your Dishwasher Table on next page.

To use the provided water hardness test strip see below.

1 Hold down the “A” button (see page 17) and press [START] until

the display indicates “d:00”.

2 Release both buttons. Press the “C” button to select the desired

setting.

3 Save the selected setting by pressing [START].

“r:04” = medium/high setting

“r:05” = high setting

“r:06” = highest setting

14

Step 1 - Run the water at the kitchen sink for 5 minutes.

Step 2 - Dip the end of the test strip with the colored squares into the tap water for 1 second and shake off excess water.

Step 3 - After one minute, compare the test strip to the chart below and determine the Dishwasher Water Softener setting.

Step 4 - Adjust the dishwasher Water Softener setting. Consult your Use and Care manual for details.

Step 5 - If required, add salt to the dishwasher salt chamber as shown.

H:00 No 0 116 0 6 0 6

H:01 Yes 117 152 7 8 7 8

H:02 Yes 153 188 9 10 9 10

H:03 Yes 189 223 11 13 11 12

H:04 Yes 224 294 14 17 13 16

H:05 Yes 295 383 18 22 17 21

H:06 Yes 384 544 23 31 22 30

H:07 Yes 545 890 32 52 31 50

 Only use salt designed for automatic dishwashers. Never use household water softener salt or table salt.

Instructions for use of included "Water Hardness Test Strip"

 Follow the instructions below for the included test strip (If purchasing a different test strip, follow manufacturers instructions).

Adjusting the Water Softener Setting of your Dishwasher (select models)

ppm Grains/gallon (gpg) °dH

Dishwasher

Water Softener

setting

Add salt to

dishwasher salt

chamber

Water Hardness Conversion Chart (Only necessary if

you purchase a different Test Strip)

Hard Water and your Dishwasher

Using the Test Strip included with your dishwasher

(Purchased Test Strips May have a Different Scale)

Your water hardness level directly impacts your dishwasher's performance. Hard water will increase spotting and reduce detergent perfor-

mance. Some dishwasher models are equipped with a water softener that uses a special salt to adjust the water hardness to obtain optimal

performance. The dishwasher salt is added to the salt chamber located under the lower dishwasher rack. The amount of salt that is dispensed

is based on your home water hardness. The home water hardness can be determined by using the water hardness test strip included in your

manual set (or from your local hardware store). The dishwasher water softener setting must be adjusted to match your water hardness.

Refill the salt container, using a funnel to pour,

right before turning on the unit to ensure that

salt overflow is immediately washed away. This

prevents corrosion. See Figure 11.

1 Open the screw cap of the salt container.

2 Fill the container with water (only required

when turning on the unit for the first time).

3 Add dishwasher salt until the was is dis-

placed and runs out.

4 Refill with salt as soon as the salt refill indicator is lit.

Warning: Never fill the salt dispenser with detergent. It will destroy the

water softening system. To prevent corrosion, refill with salt and imme-

diately begin any cycle.

Note: Refill salt only when the “Refill Salt” LED or the salt refill symbol is lit

(model dependent).

Do not use salt tablets or any salt other than dishwasher water softening

salt.

For more information about ordering salt please contact Customer Service.

Figure 11

15

Dishwasher Cycles and Options

Wash Cycles

Heavy: Best for cleaning items with baked-on food or grease. These dishes

would normally require soaking.

Auto: With our most complex soil sensing capability, this cycle is perfect

for use with mixed loads of dishware and varying amounts of food soil. This

is the most flexible cycle and is a good choice for everyday use.

Glass: A cycle for lightly soiled dishes, ideal for temperature sensitive items

or cutlery. In this cycle the temperature is reduced to help prevent dishes

from becoming damaged. It is especially helpful to reduce a cloudy or

etched appearance on glasses.

Note: Some glasses are more prone to etching due to glass manufacturing processes.

Normal: Thoroughly cleans a full load of normally soiled dishes.

Note: The Energy Guide Label was based on this soil sensing cycle with all available

options turned off. As prescribed in the energy test procedure, the unit was tested

without any Rinse Aid in the Rinse Aid dispenser. A single dose of detergent was

used in the Detergent Dispenser, with no detergent used in the prewash. For models

with a 3rd rack, the test was conducted with the upper rack in the middle position.

Express: Cleans lightly soiled dishes and reduces overall wash time.

Use this cycle to clean glasses and dessert dishware that may need to

be reused at the same event.

Rinse: Allows you to rinse food soil off of a partial load and hold the

dishes in the dishwasher until you are ready to run a full load. Do not

use detergent in this cycle.

Wash Cycle Options

Delay: Allows you to delay the start time of your dishwasher up to 24

hours.

SpeedPerfect™: The Speed Perfect option is available with Heavy, Auto,

Eco and Normal cycles.

Half Load: The Half Load option can reduce the energy and water con-

sumption when washing small, lightly soiled loads that fill approximately

half of the dishwasher’s capacity.

Delicate: The Delicate option is available only in the Heavy, Auto and Nom-

ral cycles. This cycle is best used for lightly soiled items with easy to

remove food soils.

Sanitize: The Sanitize feature is available only in the Heavy, Auto and Normal

cycles. Select one of these cycles, press the “Sanitize Option” button and

then press Start to activate the Sanitation features. The sanitize LED will

light when sanitation requirements are met. The technical sanitation mea-

sures may also improve the drying results.

Note: The dishwasher automatically defaults to Auto Wash when turned off and

back on. If you used the sanitize option in your last cycle, the dishwasher will

default to Auto Wash with the Sanitize option selected when you turn it on.

16

Wash Cycle Information

To save energy, this dishwasher has EcoSense® where the sensors in the

dishwasher automatically adjust the cycle length, temperature and water

changes based on the amount of food soil and the incoming water tempera-

ture. The “Smart Control” makes decisions that can cause the cycle time and

water usage to adjust intermittently. Wash cycle times are based on 120°F

water supply. If your household water supply is different than 120°F, your

dishwasher’s cycle times may be impacted.

Note: Only sanitizing cycles have been designed to meet the requirements of 6 for

soil removal and sanitization efficacy. There is no intention, either directly or indi-

rectly, to imply that all cycles have passed sanitization performance tests.

Table 2 - Wash Cycle Information

Heavy Auto Glass Normal Express Rinse

cycle

time

110-135

min

105-129

min

80-85 min

130-135

min

30 min 9 min

water

cons.

18.6-24.2 L

4.9-6.4 gal

13.1-24.5 L

3.5-6.5 gal

9.3-14.5 L

2.5-3.8 gal

8.8-20.8 L

2.4-5.5 gal

10.5 L

2.8 gal

4.1 L

1.1 gal

wash

temp.

66-71°C

150-160°F

53-66°C

127-150°F

45-50°C

113-122°F

45-55°C

113-131°F

45°C

113°F

incoming

rinse

temp.

72°C

162°F

67°C

153°F

62°C

144°F

60-69°C

140-156°F

50°C

122°F

incoming

Speed

Perfect™

cycle

time

95-110 min 75-90 min 60-70 min 95-105min n/a n/a

water

cons.

16.3-20.5 L

4.3-5.5 gal

16.1-20 L

4.3-5.3 gal

13.3 L

3.5 gal

16.6-21.1 L

4.4-5.6 gal

n/a n/a

Half Load

cycle

time

115 min 95-105 min 75-80 min 90-99 min n/a n/a

water

cons.

17.9 L

4.8 gal

10.2-16.5 L

2.7-4.4 gal

9.3-12.5 L

2.5--3.3 gal

10.8-13.9 L

2.8-3.7 gal

n/a n/a

Delicate

cycle

time

105-110

min

90-105 min n/a

100-120

min

n/a n/a

water

cons.

18.6-24.2 L

4.9-6.4 gal

13.1-24.5 L

3.5-6.5 gal

n/a

8.8-20.8 L

2.4-5.5 gal

n/a n/a

Sanitize

cycle time

130-150

min

125-150

min

n/a

135-155

min

n/a n/a

water

cons.

18.6-24.2 L

4.9-6.4 gal

13.1-24.5 L

3.5-6.5 gal

n/a

8.8-20.8 L

2.4-5.5 gal

n/a n/a

17

Operating the Dishwasher

* “x” can be any number or letter

NOTE: For models with hidden controls, the door must be opened before changing

settings and closed after changing settings.

Buttons are sensitive and should be touched gently. Avoid any grease or food particals rest-

ing on the buttons as they could activate the dishwasher. Wiping and cleaning can also acti-

vate the dishwasher. For best results, use bare, clean hands when touching the buttons.

NOTICE: Use caution when opening door during a running cycle. Hot water may

splash out. Open door slowly.

Start the dishwasher

1 Press the [On/Off] button. The LED of the last selected cycle flashes.

2 Select a cycle and desired options and press [Start].

Cancel a cycle

1 Press and hold the [Start] button for approximately 3 seconds until the

display reads “0:01”.

2 Wait about 1 minute while the dishwasher drains.

3 Open the door and press the [On/Off] button.

C

B

A

SHE7PT5xUC*

SHX8PT55UC

SHE8PT55UC

C

B

A

SHP7PT55UC

SHV7PT53UC

C

B

A

SHX7PT55UC

C

B

A

18

Interrupt a cycle

1 Press the [On/Off] button to turn the unit off.

2 To resume the cycle, press the [On/Off] button again.

Delay Start

You can delay the start of the cycle in one hour increments up to 24 hours.

To set delay start:

1 Press the [On/Off] button. Select a cycle.

2 Press the [Delay] button until the displayed time corresponds with

your requirements and press [Start] to activate delay start.

h:01 = 1 hour delay h:24 = 24 hour delay

To cancel delay start:

1 Press the [Delay] button until “h:00” is indicated on the digital display.

2 Press [Start] to save setting.

Cycle Completion Signal

1 Open the door and press the [On/Off] button.

2 Hold down the “A” button (see page 17) and press [Start] until the

display indicates “d:00”. Release both buttons.

3 Press the “A” button until the display shows “b:02”.

4 Press the “C” button to increase or decrease the tone “b:00” = OFF and

“b:03” = LOUDEST and press [Start] to save setting and close the door.

Intensive Drying

The final rinse uses a higher temperature which improves the drying

results. The running time may increase slightly.

To turn intensive drying on:

1 Press the [On/Off] button.

2 Hold down the “A” button and press [Start] until the display indi-

cates “d:00”. Release both buttons

3 Press the “A” button until the display shows “d:00”.

4 Press the “C” button to turn intensive drying on or off. “d:01” = ON

and “d:00” = OFF and press [Start] to save setting.

Auto Power Off

To save energy, the dishwasher is turned off 1 minute after the wash

cycle ends. Auto Power Off can be adjusted from P:00 to P:02.

To change the factory setting (P:01):

1 Press the [On/Off] button.

2 Hold down the “A” button and press [Start] until the display indi-

cates “d:00”. Release both buttons.

3 Press the “A” button until the display indicates “P:01”.

4 Press the “C” button until the display corresponds with your require-

ments.

P:00 = dishwasher does not turn off automatically

P:01 = dishwasher turns off automatically after 1 minute

P:02 = dishwasher turns off automatically after 120 minutes (2 hours)

5 Press [Start] to save the setting.

19

Time remaining image

Bosch logo

Language

To change the language of the display following these instructions.

1 Open the door and press the [On/Off] button.

2 Hold down the “A” button and press [Start] until the display indi-

cates “d:00”.

3 Release both buttons. Press the “A” button until the display shows “L:01”.

4 Press the “C” button until the display corresponds with your

requirements.

L:02 = English

L:03 = French

L:07 = Spanish

5 Press [Start] to save and close the door.

Time Light®

Our dishwashers offer a convenient time remaining indicator

light that

projects cycle status and time remaining on the kitchen floor.

Note: If the appliance is installed at eye-level, the time remaining informa-

tion is not visible.

In the default setting (S:01) the time remaining shows on the floor

alternating with the Bosch® logo (about 5 seconds per image).

To change setting:

1 Press the [On/Off] button.

2 Hold down the “A” button and press [Start] until the display indi-

cates “d:00”.

3 Release both buttons. Press the “A” button until the display shows “S:01”.

4 Press the “C” button to switch between “S:00” = OFF, “S:01” and

“S:02” = Time Light ON

5 Press [Start] to save the setting.

La page est en cours de chargement...

Bosch Benchmark SHE7PT52UC Mode d'emploi

Ce manuel convient également à

Bosch Benchmark SHE7PT52UC Mode d'emploi

dans d''autres langues

Autres documents