Whirlpool WFG540H0ES Mode d'emploi

Marque: Whirlpool

Modèle: WFG540H0ES

Catégorie: Cuisinières

Taper: Mode d'emploi

THANK YOU for purchasing this high-quality product. If you should experience a problem not covered in TROUBLESHOOTING,

please visit our website at www.whirlpool.com for additional information. If you still need assistance, call us at 1-800-253-1301.

In Canada, visit our website at www.whirlpool.ca or call us at 1-800-807-6777 for additional information.

You will need your model and serial number, located on the oven frame behind the top right side of the oven door.

Para obtener acceso a “Instrucciones para el usuario de la estufa a gas” en español, o para obtener información adicional acerca de

su producto, visite: www.whirlpool.com

Deberá tener a mano el número de modelo y de serie, que están ubicados en el marco del horno, detrás del lado derecho superior

de la puerta del horno.

GAS RANGE

USER INSTRUCTIONS

Table of Contents

RANGE SAFETY.......................................................................................2

The Anti-Tip Bracket .............................................................................3

FEATURE GUIDE .....................................................................................4

COOKTOP USE........................................................................................5

Sealed Surface Burners ........................................................................6

Burner Size............................................................................................6

Cookware..............................................................................................7

Home Canning ......................................................................................7

OVEN USE ................................................................................................8

Electronic Oven Controls......................................................................8

Sabbath Mode ......................................................................................9

Aluminum Foil........................................................................................9

Positioning Racks and Bakeware.......................................................10

Oven Vent............................................................................................10

Baking and Roasting...........................................................................10

Broiling ................................................................................................11

Convection Baking and Roasting .......................................................11

Cook Time (on some models).............................................................11

RANGE CARE.........................................................................................12

Clean Cycle .........................................................................................12

General Cleaning.................................................................................13

Oven Light...........................................................................................13

TROUBLESHOOTING............................................................................14

ACCESSORIES ......................................................................................16

WARRANTY............................................................................................16

W10392927A

RANGE SAFETY

You can be killed or seriously injured if you don't immediately

You

can be killed or seriously injured if you don't

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can

happen if the instructions are not followed.

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety

messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”

These words mean:

follow instructions.

instructions.

DANGER

WARNING

WARNING: If the information in this manual is not followed exactly, a fire or explosion

may result causing property damage, personal injury or death.

– Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this

or any other appliance.

– WHAT TO DO IF YOU SMELL GAS:

•

Do not try to light any appliance.

•

Do not touch any electrical switch.

•

Do not use any phone in your building.

•

Immediately call your gas supplier from a neighbor's phone. Follow the gas supplier's

instructions.

•

If you cannot reach your gas supplier, call the fire department.

– Installation and service must be performed by a qualified installer, service agency or

the gas supplier.

WARNING: Gas leaks cannot always be detected by smell.

Gas suppliers recommend that you use a gas detector approved by UL or CSA.

For more information, contact your gas supplier.

If a gas leak is detected, follow the “What to do if you smell gas” instructions.

State of California Proposition 65 Warnings:

WARNING: This product contains one or more chemicals known to the State of California to cause cancer.

WARNING: This product contains one or more chemicals known to the State of California to cause birth defects or other

reproductive harm.

The Anti-Tip Bracket

The range will not tip during normal use. However, the range can tip if you apply too much force or weight to the open door without the anti-

tip bracket fastened down properly.

Tip Over Hazard

A child or adult can tip the range and be killed.

Verify the anti-tip bracket has been properly installed and engaged per installation instructions.

Re-engage anti-tip bracket if range is moved.

Do not operate range without anti-tip bracket installed and engaged.

Failure to follow these instructions can result in death or serious burns to children and adults.

To verify the anti-tip bracket is installed and engaged:

• Slide range forward.

• Look for the anti-tip bracket securely attached to floor or wall.

• Slide range back so rear range foot is under anti-tip bracket.

• See installation instructions for details.

WARNING

Anti-Tip

Bracket

Range Foot

SAVE THESE INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS

WARNING:

To reduce the risk of fire, electrical shock,

injury to persons, or damage when using the range, follow

basic precautions, including the following:

■ WARNING:

TO REDUCE THE RISK OF TIPPING OF

THE RANGE, THE RANGE MUST BE SECURED BY

PROPERLY INSTALLED ANTI-TIP DEVICES. TO CHECK

IF THE DEVICES ARE INSTALLED PROPERLY, SLIDE

RANGE FORWARD, LOOK FOR ANTI-TIP BRACKET

SECURELY ATTACHED TO FLOOR OR WALL, AND

SLIDE RANGE BACK SO REAR RANGE FOOT IS UNDER

ANTI-TIP BRACKET.

■ WARNING:

NEVER use this appliance as a space

heater to heat or warm the room. Doing so may result in

carbon monoxide poisoning and overheating of the oven.

■ WARNING:

NEVER cover any slots, holes or passages

in the oven bottom or cover an entire rack with materials

such as aluminum foil. Doing so blocks air flow through the

oven and may cause carbon monoxide poisoning.

Aluminum foil linings may also trap heat, causing a fire

hazard.

■ CAUTION:

Do not store items of interest to children in

cabinets above a range or on the backguard of a range –

children climbing on the range to reach items could be

seriously injured.

■

Proper Installation – The range, when installed, must be

electrically grounded in accordance with local codes or, in

the absence of local codes, with the

National Electrical

Code, ANSI/NFPA 70

. In Canada, the range must be

electrically grounded in accordance with Canadian

Electrical Code. Be sure the range is properly installed and

grounded by a qualified technician.

■

This range is equipped with a three-prong grounding plug

for your protection against shock hazard and should be

plugged directly into a properly grounded receptacle. Do

not cut or remove the grounding prong from this plug.

■

Disconnect power before servicing.

■

Injuries may result from the misuse of appliance doors or

drawers such as stepping, leaning, or sitting on the doors

or drawers.

■

Maintenance – Keep range area clear and free from

combustible materials, gasoline, and other flammable

vapors and liquids.

■

Storage in or on the Range – Flammable materials should

not be stored in an oven or near surface units.

■

Top burner flame size should be adjusted so it does not

extend beyond the edge of the cooking utensil.

For self-cleaning ranges –

■

Before Self-Cleaning the Oven – Remove broiler pan and

other utensils. Wipe off all excessive spillage before

initiating the cleaning cycle.

FEATURE GUIDE

This manual covers several models. Your model may have some or all of the items listed. Refer to this manual or the Frequently Asked

Questions (FAQs) section of our website at www.whirlpool.com for more detailed instructions. In Canada, refer to the Customer Service

Section at www.whirlpool.ca.

WARNING

Food Poisoning Hazard

Do not let food sit in oven more than one hour before

or after cooking.

Doing so can result in food poisoning or sickness.

KEYPAD FEATURE INSTRUCTIONS

CLOCK Clock The Clock uses a 12-hour cycle.

1. Check that the oven is off.

2. Press CLOCK.

3. Press TEMP/TIME “up” or “down” arrow pads to set the time of day.

4. Press CLOCK or START.

OVEN LIGHT Oven cavity light The oven light is controlled by a keypad on the oven control panel. While the oven door is closed,

press the oven light switch to turn the light on and off. The oven light will come on when the oven

door is opened.

TIMER

(Set/Off)

Oven timer The Timer can be set in hours or minutes up to 12 hours and 59 minutes.

1. Press TIMER.

2. Press TEMP/TIME “up” or “down” arrow pads to set the length of time.

3. Press START to begin the countdown. If enabled, end-of-cycle tones will sound at end of

countdown.

4. Press TIMER twice to cancel the Timer. Do not press the Cancel keypad because the oven will

turn off.

5. If the TIMER is running, but not in the display, press TIMER to display the countdown for

5 seconds.

START Cooking start The Start pad begins any oven function. If Start is not pressed within 5 seconds, “PUSH” appears

in the display. If Start is not pressed within 1 minute after pressing a keypad, the function is

canceled and the time of day is displayed.

CANCEL Range function The Cancel keypad stops any function except the Clock, Timer and Oven Control Lockout.

TEMP/TIME Temperature and

time adjust

The “up” or “down” arrow pads are used to adjust time and temperature settings.

BAKE Baking and

roasting

1. Press BAKE.

2. Press Temp/Time “up” or “down” arrow pads to set a temperature other than 350°F (175°C) in

5°F (5°C) increments between 170°F and 500°F (75°C and 260°C).

3. Press START.

4. To change the temperature repeat Step 2. Press START or wait 5 seconds for the change to

take effect.

5. Press CANCEL when finished.

BROIL Broiling 1. Press BROIL.

2. Press TEMP/TIME “up” or “down” arrow pads to change the temperature in 5°F (5°C)

increments between 300°F and 500°F (150°C and 260°C).

3. Press START, and allow oven to preheat for 5 minutes.

4. Position cookware in oven and close the oven door.

5. Press CANCEL when finished.

CONVECT Convection

baking and

roasting

1. Press CONVECT.

2. Press TEMP/TIME “up” or “down” arrow pads to set a temperature other than 350°F (175°C) in

5°F (5°C) increments between 170°F and 500°F (75°C and 260°C).

3. Press START.

4. To change the temperature, repeat Step 2. Press START or wait 5 seconds for the change to

take effect.

5. Press CANCEL when finished.

COOKTOP USE

Electric igniters automatically light the surface burners when

control knobs are turned to IGNITE.

Before setting a control knob, place filled cookware on the grate.

Do not operate a burner using empty cookware or without

cookware on the grate.

To Set:

1. Push in and turn knob counterclockwise to IGNITE.

All surface burners will click. Only the burner with the control

knob turned to IGNITE will produce a flame.

2. Turn knob to anywhere between HIGH and LOW.

Power Failure

In case of prolonged power failure, the surface burners can be lit

manually. Hold a lit match near a burner and turn knob

counterclockwise to IGNITE. After burner lights, turn knob to

setting.

KEEP WARM Hold warm Food must be at serving temperature before placing it in the warmed oven.

1. Press KEEP WARM.

2. Temperature is set at 170°F (75°C) for 60 minutes (1.00 hour).

3. Press START.

4. Press CANCEL when finished.

NOTE: The oven will automatically turn off after 60 minutes.

START TIME Delayed start The Start Time keypad is used to enter the starting time for an oven function with a delayed start.

Start Time should not be used for foods such as breads and cakes because they may not bake

properly.

To set a Timed Cook or a Delayed Timed Cook, see “Cook Time” section.

COOK TIME Timed cooking Timed Cooking allows the oven to be set to turn on at a certain time of day, cook for a set length of

time, and/or shut off automatically.

To set a Timed Cook or a Delayed Timed Cook, see “Cook Time” section.

CLEAN Clean cycle See the “Clean Cycle” section.

START

(hold 3 sec

to lock)

Oven control

lockout

1. Check that the oven is off.

2. Press and hold the START (hold 3 sec to lock) keypad for 3 seconds.

3. A tone will sound, and “Loc” will be displayed.

4. Repeat to unlock.

NOTE: Only the CLOCK, OVEN LIGHT and TIMER keypads will function with the controls locked.

The cooktop functions are not affected by the oven control lockout.

KEYPAD FEATURE INSTRUCTIONS

WARNING

Fire Hazard

Do not let the burner flame extend beyond the edge of

the pan.

Turn off all controls when not cooking.

Failure to follow these instructions can result in death

or fire.

REMEMBER: When range is in use, the entire cooktop area

may become hot.

Sealed Surface Burners

IMPORTANT: Do not obstruct the flow of combustion and

ventilation air around the burner grate edges.

Burner cap: Always keep the burner cap in place when using a

surface burner. A clean burner cap will help avoid poor ignition and

uneven flames. Always clean the burner cap after a spillover and

routinely remove and clean the caps according to the “General

Cleaning” section.

Gas tube opening: Gas must flow freely throughout the gas tube

opening for the burner to light properly. Keep this area free of soil

and do not allow spills, food, cleaning agents or any other material

to enter the gas tube opening. Keep spillovers out of the gas tube

by always using a burner cap.

Burner ports: Check burner flames occasionally for proper size

and shape as shown in the previous illustration. A good flame is

blue in color, not yellow. Keep this area free of soil and do not allow

spills, food, cleaning agents or any other material to enter the

burner ports.

To Clean:

IMPORTANT: Before cleaning, make sure all controls are off and

the oven and cooktop are cool. Do not use oven cleaners, bleach

or rust removers.

1. Remove the burner cap from the burner base and clean

according to “General Cleaning” section.

2. Clean the gas tube opening with a damp cloth.

3. Clean clogged burner ports with a straight pin as shown. Do

not enlarge or distort the port. Do not use a wooden toothpick.

If the burner needs to be adjusted, contact a trained repair

specialist.

4. Replace the burner cap, making sure the alignment pins are

properly aligned with the burner cap.

5. Turn on the burner. If the burner does not light, check cap

alignment. If the burner still does not light, do not service the

sealed burner yourself. Contact a trained repair specialist.

Burner Size

Select a burner that best fits your cookware. See the following

illustration and chart.

A. Burner cap

B. Burner base

C. Alignment pins

D. Igniter

E. Gas tube opening

A. 1-1¹⁄₂" (25-38 mm)

B. Burner ports

A. Incorrect

B. Correct

Burner Size Recommended Use

Small

■ Low-heat cooking

■ Melting chocolate or butter

Medium

■ Multipurpose burner

Large

■ For large cookware

Extra-Large ■ Most powerful burner

■ For large cookware

Cookware

IMPORTANT: Do not leave empty cookware on a hot surface

cooking area, element or surface burner.

Ideal cookware should have a flat bottom, straight sides and a well-

fitting lid, and the material should be of medium-to-heavy

thickness.

Rough finishes may scratch the cooktop or grates. Aluminum and

copper may be used as a core or base in cookware. However,

when used as a base they can leave permanent marks on the

grates.

Cookware material is a factor in how quickly and evenly heat is

transferred, which affects cooking results.

Cookware with nonstick surfaces should not be used under the

broiler.

Check for flatness by placing the straight edge of a ruler across the

bottom of the cookware. While you rotate the ruler, no space or

light should be visible between it and the cookware.

Use the following chart as a guide for cookware material

characteristics.

For best results, the cookware should be centered above the

burner with the bottom sitting level on the grate. The flame should

be adjusted so that it does not extend up the sides of the pan.

Home Canning

When canning for long periods, alternate the use of surface

burners between batches. This allows time for the most recently

used areas to cool.

■ Center the canner on the grate above the burner.

■ Do not place canner on 2 surface burners at the same time.

■ For more information, contact your local agricultural extension

office, or refer to the USDA Home Canning Guides. Companies

that manufacture home canning products can also offer

assistance.

1 0

1 1

1 2

1 3

1 4

1 5

1 6

1 7

1 8

1 9

2 0

COOKWARE CHARACTERISTICS

Aluminum

■ Heats quickly and evenly.

■ Suitable for all types of cooking.

■ Medium or heavy thickness is best for

most cooking tasks.

Cast iron

■ Heats slowly and evenly.

■ Good for browning and frying.

■ Maintains heat for slow cooking.

Ceramic or

Ceramic glass

■ Follow manufacturer’s instructions.

■ Heats slowly, but unevenly.

■ Ideal results on low to medium heat

settings.

Copper

■ Heats very quickly and evenly.

Earthenware

■ Follow manufacturer’s instructions.

■ Use on low heat settings.

Porcelain

enamel-on-steel

or cast iron

■ See stainless steel or cast iron.

Stainless steel ■ Heats quickly, but unevenly.

■ A core or base of aluminum or copper

on stainless steel provides even

heating.

OVEN USE

The normal operation of the range will include several noises that

may be heard each time the Bake or Broil burners ignite during the

cooking cycle:

■ gas valves may make a “popping” sound when opening or

closing

■ igniters will “click” several times until a flame is sensed

■ a “poof” sound is heard when a Bake or Broil burner ignites

Odors and smoke are normal when the oven is used the first few

times, or when it is heavily soiled.

IMPORTANT: The health of some birds is extremely sensitive to the

fumes given off. Exposure to the fumes may result in death to

certain birds. Always move birds to another closed and well-

ventilated room.

Electronic Oven Controls

Control Display

The display will flash when powered up or after a power loss. Press

CANCEL to clear. When oven is not in use, the time of day is

displayed, unless the range is in Energy Save mode. During Energy

Save mode, the display will be blank. Indicator lights show

functions that are in use.

Options Mode

Press and hold TIMER for 5 seconds, and “Opt” will appear. Use

the Temp/Time “up” or “down” arrow pads to cycle through the

following options. Press CANCEL to exit the mode.

Fahrenheit and Celsius

The temperature is preset at Fahrenheit, but can be changed to

Celsius. Press TIMER to toggle between Fahrenheit and Celsius.

Press CANCEL to exit.

End of Cycle Tones

“b1” (beep once) or “b” (continue to beep) will be displayed. Press

TIMER to toggle through selections. Press CANCEL to exit.

Oven Light with Door Open

“LOn” indicates that the oven light will turn on when the door is

open. If “LOFF” is displayed, the oven light will turn on only with the

oven light switch. Press TIMER to toggle through selection. Press

CANCEL to exit.

12-Hour Shutoff

If “12 Hr” is displayed, the oven will automatically shut off after

12 hours. Press TIMER to toggle to “- - Hr” to disable the 12-hour

shutoff. Press CANCEL to exit.

To nes

Tones are audible signals, indicating the following:

Basic Functions

One tone

■ Valid pad press

■ Oven is preheated (long tone)

■ Function has been entered

■ Reminder (on some models), repeating every 20 seconds after

the end-of-cycle tones

Three tones

■ Invalid pad press

Four tones

■ End of cycle

Energy Save

The Energy Save feature places the control and clock into a Sleep

mode that reduces power consumption when the range is not

being used.

To enter the Energy Save mode, the oven and control must be idle

with the Time of Day (TOD) shown on the display. Press and hold

CLOCK for 10 seconds. The control will beep and the display will

show the letters “ES” followed by “On” twice. The display will

return to the TOD.

If Energy Save mode is activated, each time the range is idle for

5 minutes with only the Time of Day (TOD) shown, the display will

show the letters “ES” followed by “On” twice. The display will then

be blank until a control key is pressed or the oven door is opened.

The control will then perform any of its operations in response to

additional key presses.

To exit Energy Save mode, press and hold the CLOCK key for 5 to

10 seconds. The control will beep and the display will show the

letters “ES” followed by “Off” twice. The display will return to the

TOD.

Oven Temperature Control

IMPORTANT: Do not use a thermometer to measure oven

temperature because opening the oven door may cause element

cycling to give incorrect readings.

The oven provides accurate temperatures; however, it may cook

faster or slower than your previous oven, so the temperature can

be adjusted to personalize it for your cooking needs. It can be

changed in Fahrenheit or Celsius.

To Adjust Oven Temperature:

1. Press and hold BAKE for 5 seconds until the oven display

shows the current setting, for example “0°F CAL” or “00.”

2. Press the Temp/Time “up” or “down” arrow pads to increase or

to decrease the temperature in 10°F (5°C or 6°C) amounts. The

adjustment can be set between 30°F (17°C) and -30°F (-17°C).

3. Press START.

Sabbath Mode

The Sabbath Mode sets the oven to remain on in a Bake setting

until turned off. A Timed Bake can also be set to keep the oven on

for only part of the Sabbath. The Oven Control Lockout Feature (if

present) will be disabled during the Sabbath Mode. After the

Sabbath Mode is set no tones will sound, the display will not show

the temperature, the Kitchen Timer Mode will be canceled (if active)

and only the following pads will function:

■ “up” or “down” arrow pads

■ Cancel

When the oven door is opened or closed, the oven light will not turn

on or off and the heating elements will not turn on or off

immediately.

When power is restored after a power failure, the oven will return to

Sabbath Mode and remain Sabbath compliant with the bake

elements off until the Cancel keypad is pressed.

Pressing the Cancel keypad at any time returns the oven to the

normal cooking mode (not Sabbath Mode compliant).

Before entering the Sabbath Mode, it must be decided if the oven

light is to be on or off for the entire Sabbath Mode period. If the

light is on when entering Sabbath Mode, it will remain on for the

entire time Sabbath Mode is in use. If the light is off when entering

Sabbath Mode, it will remain off for the entire time Sabbath Mode is

in use. Opening the oven door or pressing the Oven Light keypad

will not affect the oven light once Sabbath Mode has been entered.

If the oven has the Convection Bake feature, the oven light is

controlled by a separate Oven Light switch on the console. If the

oven light is on when entering the Sabbath Mode, it will remain on

for the entire time Sabbath Mode is in use. For the oven light to be

off during the Sabbath Mode, the light bulb must be removed from

the oven prior to entering the Sabbath Mode. Not performing these

steps will cause the oven light to turn on when the oven door is

opened, resulting in the oven being not Sabbath compliant.

On the Holiday, the oven temperature can be changed once the

oven is in Sabbath Mode by pressing the “up” or “down” arrow

pads. The oven temperature will change 25°F (14°C) each time the

keypad is pressed. The display will not change, and there will be no

sounds during this adjustment.

To Bake Using Sabbath Mode:

1. Press BAKE.

2. Press the “up” or “down” arrow pads.

3. Press START.

4. Press and hold the TIMER keypad for 5 seconds. “SAb” will

flash in the display.

5. Press START within 5 seconds to enter Sabbath Mode;

otherwise, the entire cycle cancels out. “SAb” will stop flashing

and remain on in the display. The oven is now in Sabbath Mode

and is Sabbath compliant.

Pressing the Cancel keypad at any time returns the oven to the

normal cooking mode (not Sabbath Mode compliant).

To set a Timed Bake using Sabbath Mode

(on some models):

1. Press BAKE.

2. Press the “up” or “down” arrow pads to enter a temperature

other than the one displayed.

3. Press COOK TIME. The Cook Time oven indicator light will light

up.

4. Press the “up” or “down” arrow pads to enter a cook time

length.

5. Press START.

6. Press and hold the TIMER keypad for 5 seconds. “SAb” will

flash in the display.

7. Press START within 5 seconds to enter Sabbath Mode;

otherwise, the entire cycle cancels out. “SAb” will stop flashing

and remain on in the display. The oven is now in Sabbath Mode

and is Sabbath compliant. The Bake, On and Cook Time

indicator lights will be displayed.

When the set cook time ends, the oven will shut off automatically

and the indicator lights will turn off, indicating the end of the cycle.

Pressing the Cancel keypad at any time returns the oven to the

normal cooking mode (not Sabbath Mode compliant).

To set a Delayed Timed Bake using Sabbath Mode

(on some models):

1. Press BAKE.

2. Press the “up” or “down” arrow pads to enter a temperature

other than the one displayed.

3. Press COOK TIME. The Cook Time oven indicator light will light

up.

4. Press the “up” or “down” arrow pads to enter a cook time

length.

5. Press START TIME. The Start Time indicator light will light up.

6. Press the “up” or “down” arrow pads to enter a start time.

7. Press START.

8. Press and hold the TIMER keypad for 5 seconds. “SAb” will

flash in the display.

9. Press START within 5 seconds to enter Sabbath Mode;

otherwise, the entire cycle cancels out. “SAb” will stop flashing

and remain on in the display. The oven is now in Sabbath Mode

and is Sabbath compliant. The On and Delay indicator lights

will be displayed.

When the start time is reached the Bake, On and Cook Time

indicator lights will automatically turn on. When the set cook time

ends, the oven will shut off automatically and the indicator lights

will turn off, indicating the end of the cycle.

Pressing the Cancel keypad at any time returns the oven to the

normal cooking mode (not Sabbath Mode compliant).

Aluminum Foil

IMPORTANT: To avoid permanent damage to the oven bottom

finish, do not line the oven bottom with any type of foil or liner.

For best cooking results, do not cover entire oven rack with foil

because air must be able to move freely.

WARNING

Food Poisoning Hazard

Do not let food sit in oven more than one hour before

or after cooking.

Doing so can result in food poisoning or sickness.

Positioning Racks and Bakeware

IMPORTANT: To avoid permanent damage to the porcelain finish,

do not place food or bakeware directly on the oven door or bottom.

Bakeware

To cook food evenly, hot air must be able to circulate. Allow

2" (5 cm) of space around bakeware and oven walls. Make sure

that no bakeware piece is directly over another.

Racks

■ Position racks before turning on the oven.

■ Do not move racks with bakeware on them.

■ Make sure racks are level.

To move a rack, pull it out to the stop position, raise the front edge,

and then lift out. Use the following illustration and charts as a

guide.

The oven has 7 positions for a flat rack, as shown in the previous

illustration and the following table.

*If your model has a Max Capacity Oven Rack, the recessed ends

must be placed in the rack position above the desired position of

the food. See the following illustration.

IMPORTANT: These rack positions are for flat racks. If a Max

Capacity Oven Rack is used, the rack position must be adjusted as

shown in the previous figure.

Multiple Rack Cooking

2-rack: Use rack positions 2 and 5 for regular baking.

2-rack (convection only): Use rack positions 2 and 5.

Baking Layer Cakes on 2 Racks

For best results when baking cakes on 2 racks, use racks 2 and 5.

For best results when convection baking cakes on 2 racks, use

racks 2 and 5. Place the cakes on the racks as shown.

Oven Vent

The oven vent releases hot air and moisture from the oven, and

should not be blocked or covered. Blocking or covering the oven

vent will cause poor air circulation, affecting cooking and cleaning

results. Do not set plastics, paper or other items that could melt or

burn near the oven vent.

Baking and Roasting

ACCUBAKE

Temperature Management System

The ACCUBAKE

system electronically regulates the oven heat

levels during preheat and bake to maintain a precise temperature

range for optimal cooking results. The bake and broil elements or

burners cycle on and off in intervals. On convection range models,

the fan may be cycled on and off for short intervals to provide the

best results.

Before baking and roasting, position racks according to

“Positioning Racks and Bakeware” section. When roasting, it is not

necessary to wait for the oven preheat cycle to end before putting

food in unless it is recommended in the recipe.

Preheating

When START is pressed, the oven will begin preheating. Once

100ºF (35ºC) is reached, the display temperature will increase as

the actual temperature of the oven increases. When the preheat

temperature is reached, a tone will sound, and the selected

temperature will appear on the display. The time necessary to

preheat the oven to 350°F (177°C) is approximately 10 to

15 minutes. Factors that have an impact on preheat times are:

room temperature, starting oven temperature, and the number of

oven racks. Unused oven racks can be removed prior to preheating

your oven to reduce the preheat times.

Flat Rack Position* Type of Food

7 Broiling/searing meats, hamburgers,

steaks

6 Broiled meats, poultry, fish

3 or 4 Most baked goods, casseroles

2 Roasted meats

1 Large roasts or poultry

A. Ends of rack in position 3

B. Food in position 2

A. Oven vent

Broiling

When broiling, preheat the oven for 5 minutes before putting food

in unless recommended otherwise in the recipe. Position food on

grid in a broiler pan, then place it in the center of the oven rack.

IMPORTANT: Close the door to ensure proper broiling

temperature.

Changing the temperature when Custom Broiling allows more

precise control when cooking. The lower the broil setting, the

slower the cooking. Thicker cuts and unevenly shaped pieces of

meat, fish and poultry may cook better at lower broil settings. Use

racks 6 or 7 for broiling. Refer to the “Positioning Racks and

Bakeware” section for more information.

■ For best results, use a broiler pan and grid. It is designed to

drain juices and help avoid spatter and smoke.

If you would like to purchase a broiler pan, one may be ordered.

Please refer to the “Accessories” section for more information.

NOTE: Odors and smoke are normal the first few times the oven is

used or if the oven is heavily soiled.

Convection Baking and Roasting

In a convection oven, the fan-circulated hot air continually

distributes heat more evenly than the natural movement of air in a

standard thermal oven. This movement of hot air helps maintain a

consistent temperature throughout the oven, cooking foods more

evenly, crisping surfaces while sealing in moisture and yielding

crustier breads.

With convection cooking, most foods can be cooked at a

temperature 25°F (14°C) lower than in a standard thermal oven,

and cooking time can be shortened by up to 30%.

During convection baking or roasting, the bake and broil elements

or burners cycle on and off in intervals to maintain the oven

temperature, while the fan circulates the hot air. The convection fan

will not be on during the first 5 minutes of the cycle.

If the oven door is opened during convection baking or roasting,

the fan will turn off immediately. It will come back on when the oven

door is closed.

Cook Time

(on some models)

To Set a Timed Cook:

1. Press BAKE. The bake indicator light will light up.

2. Press the TEMP/TIME “up” or “down” arrow pads to enter a

temperature other than the one displayed.

3. Press COOK TIME. The cook time oven indicator light will light

up.

4. Press the TEMP/TIME “up” or “down” arrow pads to enter the

length of time to cook.

5. Press START. The display will count down the time. When the

time ends, the oven will shut off automatically and “End” will

appear on the display.

6. Press CANCEL to clear the display.

To Set a Delayed Timed Cook:

Before setting, make sure the clock is set to the correct time of day.

See the “Clock” keypad feature in the “Feature Guide” section.

1. Press BAKE.

2. Press the TEMP/TIME “up” or “down” arrow pads to enter a

temperature other than the one displayed.

3. Press COOK TIME. The cook time oven indicator light will light

up.

4. Press TEMP/TIME “up” or “down” arrow pads to enter the

length of time to cook.

5. Press START TIME. The start time/delay oven indicator light will

light up.

6. Press TEMP/TIME “up” or “down” arrow pads to enter the time

of day to start.

7. Press START.

When the start time is reached, the oven will automatically turn on.

The temperature and/or time settings can be changed anytime

after pressing Start by repeating steps 1-7. When the set cook time

ends, the oven will shut off automatically and “End” will appear on

the display.

8. Press CANCEL to clear the display.

WARNING

Food Poisoning Hazard

Do not let food sit in oven more than one hour before

or after cooking.

Doing so can result in food poisoning or sickness.

RANGE CARE

Clean Cycle

AquaLift™ Technology is an innovative cleaning solution that

utilizes heat and water to release baked-on spills from the oven in

less than 1 hour. This new cleaning technology is a low-heat, odor-

free alternative to traditional self-cleaning options.

Allow the oven to cool to room temperature before using the Clean

cycle. If your oven cavity is above 200°F (93°C), “HOT” will appear

in the display, and the Clean cycle will not be activated until the

oven cavity cools down.

To Clean:

1. Remove all racks and accessories from the oven cavity and

wipe excess soil. Use a plastic scraper to remove easily-

removed soils.

2. Pour 1¾ cups (14 oz [414 mL]) of distilled or filtered water onto

the bottom of the empty oven and close the oven door.

IMPORTANT: Do not use chemicals or other additives with the

water. Do not open the oven door during the Clean cycle. The

water on the oven bottom is hot.

3. Press CLEAN and then START on the oven control panel.

4. Allow 40 minutes for cleaning and cool down. A beep will

sound when the Clean cycle is complete.

5. Press CANCEL at the end of the cycle. CANCEL may be

pressed at any time to stop the Clean cycle.

6. Remove the residual water and loosened soils with a sponge or

cloth immediately after the Clean cycle is complete. Much of

the initial 1¾ cups (14 oz [414 mL]) of water will remain in the

oven after the cycle is completed. If additional soils remain,

leave a small amount of water in the oven bottom to assist with

the cleaning.

7. If any soils remain, remove them with a non-scratch scrubbing

sponge or plastic scraper. Additional Clean cycles may be run

to help remove the stubborn soils.

IMPORTANT: Do not use oven cleaners. The use of chemicals,

including commercial oven cleaners or metal scouring pads,

may cause permanent damage to the porcelain surface of the

oven interior.

NOTES:

■ The range should be level to ensure that the entire surface of

the bottom of the oven cavity is covered by water at the

beginning of the Clean cycle.

■ For best results, use distilled or filtered water. Tap water may

leave mineral deposits on the oven bottom.

■ Before removing the residual water and loosened soils at the

end of the Clean cycle, insert a cloth or paper towel between

the lower edge of the oven door and the front frame to keep

water from spilling onto the front of the range and the floor.

■ Soil baked on through several cooking cycles will be more

difficult to remove with the Clean cycle.

■ Nonabrasive scrub sponges or eraser style cleaning pads

(without cleaners) can be effective for cleaning the oven cavity

walls, oven door and oven bottom for difficult soils. For best

results, moisten the pads and sponges before use.

■ Run an additional Clean cycle for stubborn soils.

■ affresh™ Kitchen Appliance Cleaner and affresh™ Cooktop

Cleaner may be used to clean the oven bottom, walls and door

when the oven has finished the cycle and returned to room

temperature. Refer to the “Accessories” section for information

on ordering.

■ Additional AquaLift™ Technology Cleaning Kits may be

obtained by ordering Part Number W10423113RP. See the

“Accessories” section for more information.

■ For assistance with AquaLift™ Technology, call

1-877-258-0808, or visit our website at http://whr.pl/aqualift.

General Cleaning

IMPORTANT: Before cleaning, make sure all controls are off and

the oven and cooktop are cool. Always follow label instructions on

cleaning products. For additional information, you can visit the

Frequently Asked Questions (FAQs) section of our website at

www.whirlpool.com. In Canada, reference the Customer Service

section at www.whirlpool.ca.

Soap, water and a soft cloth or sponge are suggested first unless

otherwise noted.

EXTERIOR PORCELAIN ENAMEL SURFACES (on some

models)

Food spills containing acids, such as vinegar and tomato, should

be cleaned as soon as the entire range is cool. These spills may

affect the finish.

Cleaning Method:

■ Glass cleaner, mild liquid cleaner or nonabrasive scrubbing

pad:

Gently clean around the model and serial number plate

because scrubbing may remove numbers.

■ affresh™ Kitchen and Appliance Cleaner Part Number

W10355010 (not included):

See the “Accessories” section for more information.

STAINLESS STEEL (on some models)

NOTE: To avoid damage to stainless steel surfaces, do not use

soap-filled scouring pads, abrasive cleaners, Cooktop Cleaner,

steel-wool pads, gritty washcloths or abrasive paper towels.

Damage may occur to stainless steel surfaces, even with one-time

or limited use.

Cleaning Method:

Rub in direction of grain to avoid damaging.

■ affresh™ Stainless Steel Cleaner Part Number W10355016 (not

included):

See the “Accessories” section for more information.

Liquid detergent or all-purpose cleaner:

Rinse with clean water and dry with soft, lint-free cloth.

METALLIC PAINT (on some models)

Do not use abrasive cleaners, cleaners with bleach, rust removers,

ammonia or sodium hydroxide (lye) because paint surface may

stain.

PORCELAIN-COATED GRATES AND CAPS

Food spills containing acids, such as vinegar and tomato, should

be cleaned as soon as the cooktop, grates and caps are cool.

These spills may affect the finish.

To avoid chipping, do not bang grates and caps against each other

or hard surfaces such as cast iron cookware.

Do not reassemble caps on burners while wet.

Cleaning Method:

■ Nonabrasive plastic scrubbing pad and mildly abrasive

cleanser:

Clean as soon as cooktop, grates and caps are cool.

■ Dishwasher (grates only, not caps):

Use the most aggressive cycle. Cooked-on soils should be

soaked or scrubbed before going into a dishwasher.

■ Gas Grate and Drip Pan Cleaner Part Number 31617:

See the “Accessories” section for more information.

SURFACE BURNERS

■ See “Sealed Surface Burners” section.

COOKTOP CONTROLS

To avoid damage to the cooktop controls, do not use steel wool,

abrasive cleansers or oven cleaner.

To avoid damage, do not soak knobs. When replacing knobs, make

sure knobs are in the OFF position.

On some models, do not remove seals under knobs.

Cleaning Method:

■ Soap and water:

Pull knobs straight away from control panel to remove.

CONTROL PANEL AND OVEN DOOR EXTERIOR

To avoid damage to the control panel, do not use abrasive

cleaners, steel-wool pads, gritty washcloths or abrasive paper

towels.

Cleaning Method:

■ Glass cleaner and soft cloth or sponge:

Apply glass cleaner to soft cloth or sponge, not directly on

panel.

■ affresh™ Kitchen and Appliance Cleaner Part Number

W10355010 (not included):

See the “Accessories” section for more information.

OVEN RACKS

Cleaning Method:

■ Steel-wool pad

■ For racks that have discolored and are harder to slide, a light

coating of vegetable oil applied to the rack guides will help

them slide.

STORAGE DRAWER

Check that storage drawer is cool and empty before cleaning.

Cleaning Method:

■ Mild detergent

OVEN CAVITY

Use AquaLift™ Technology regularly to clean oven spills.

Do not use oven cleaners.

Food spills should be cleaned when oven cools. At high

temperatures, foods react with porcelain and staining, etching,

pitting or faint white spots can result.

Cleaning Method:

■ Clean cycle: See “Clean Cycle” section

Oven Light

The oven light is a standard 40-watt appliance bulb. Before

replacing, make sure the oven and cooktop are cool and the

control knobs are in the off position.

To Replace:

1. Unplug range or disconnect power.

2. Turn the glass bulb cover in the back of the oven

counterclockwise to remove.

3. Turn bulb counterclockwise to remove from socket.

4. Replace bulb, then bulb cover by turning clockwise.

5. Plug in range or reconnect power.

TROUBLESHOOTING

First try the solutions suggested here or visit our website and reference FAQs (Frequently Asked Questions)

to possibly avoid the cost of a service call.

www.whirlpool.com

In Canada, reference the Customer Service section at www.whirlpool.ca

PROBLEM POSSIBLE CAUSES SOLUTIONS

Nothing will operate Power supply cord is unplugged. Plug into a grounded 3 prong outlet.

ENERGY SAVE is active, and the

display is blank.

Press any key on the control to display the Time of Day. See the

“Electronic Oven Controls” section for more information.

Household fuse is blown or a

circuit breaker is tripped.

Replace the fuse or reset the circuit breaker. If the problem

continues, call an electrician.

Main or regulator gas shutoff valve

is in the off position.

See the Installation Instructions.

The range is improperly connected

to the gas supply.

Contact a trained repair specialist or see Installation

Instructions.

Surface burners will not

operate

The control knob is not set

correctly.

Push in knob before turning to a setting.

Air in the gas lines If this is the first time the surface burners have been used, turn

on any one of the surface burner knobs to release air from the

gas lines.

Clogged burner ports See “Sealed Surface Burners” section.

Surface burner flames are

uneven, yellow and/or noisy

Clogged burner ports See “Sealed Surface Burners” section.

Burner caps positioned improperly See “Sealed Surface Burners” section.

Range converted improperly If propane gas is being used, contact a service technician or

see cover for contact information.

Excessive heat around

cookware on cooktop

Cookware and flame are not

matched.

The cookware should be centered above the burner with the

bottom sitting level on the grate. The flame should be adjusted

so that it does not extend up the sides of the pan.

Cooktop cooking results not

what expected

Improper cookware Ideal cookware should have a flat bottom, straight sides and a

well fitting lid, and the material should be of a medium to heavy

thickness.

Control knob set to incorrect heat

level

See “Cooktop Use” section.

Range is not level Level the range. See the Installation Instructions.

Oven will not operate Air in the gas lines If this is the first time the oven has been used, turn on any one of

the surface burner knobs to release air from the gas lines.

Control is locked. Press and hold START for 3 seconds to unlock.

Control is in Demo Mode. Press and hold START TIME for 10 seconds to exit Demo Mode.

Demo Mode is used for display models in a showroom.

Electronic oven control set

incorrectly

See “Electronic Oven Controls” section.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

WARNING

Oven burner flames are yellow

or noisy

Range converted improperly If propane gas is being used, contact a service technician or

see cover for contact information.

Oven temperature too high or

too low

Oven temperature needs

adjustment.

See “Oven Temperature Control” in the “Electronic Oven

Controls” section.

Convection fan not working The convection cycle is in the first

5 minutes of operation.

This is normal. The convection fan will start running

approximately 5 minutes into the cycle.

Oven door is open. If the oven door is opened during convention cooking, the fan

will turn off immediately. It will come back on when the oven

door is closed.

Display shows messages Power failure (display shows

flashing time)

Clear the display. On some models, reset the clock, if needed.

See “Clock” keypad feature in the “Feature Guide” section.

Error code (display shows letter

followed by number)

Depending on your model, press CANCEL to clear the display.

See “Control Display” in the “Electronic Oven Controls” section.

If it reappears, call for service. See cover for contact

information.

Start needs to be pressed so a

cycle can begin (display shows

“PUSH” or “PSH”).

See the “Start” keypad feature in the “Feature Guide” section.

Range is in Sabbath Mode (display

shows “SAb”).

Press CANCEL to exit Sabbath Mode.

Clean cycle did not work on all

spills

Several cooking cycles between

Clean cycles or spills on oven walls

and doors

Run additional Clean cycles. Use the AquaLift™ Technology

Cleaning Kit. affresh™ Kitchen and Appliance Cleaner or

affresh™ Cooktop Cleaner can be used for stubborn soils. See

the “Accessories” and “Clean Cycle” sections for more

information.

Mineral deposits are left on

the oven bottom after the

Clean cycle

Tap water was used in the Clean

cycle.

Use distilled or filtered water in the Clean cycle.

To remove deposits, use a cloth soaked with vinegar. Then use a

cloth dampened with water to thoroughly remove any vinegar

residue.

Range is not level. Mineral deposits will collect on dry areas of the oven bottom

during the Clean cycle. Level the range. See the Installation

Instructions.

To remove deposits, use a cloth soaked with vinegar. Then use a

cloth dampened with water to thoroughly remove any vinegar

residue.

Oven cooking results not what

expected

Range is not level. Level the range. See the Installation Instructions.

The temperature set was incorrect. Double-check the recipe in a reliable cookbook.

Oven temperature needs

adjustment.

See “Oven Temperature Control” in the “Electronic Oven

Controls” section.

Oven was not preheated. See “Baking and Roasting” section.

Racks were positioned improperly. See “Positioning Racks and Bakeware” section.

Not enough air circulation around

bakeware

See “Positioning Racks and Bakeware” section.

Darker browning of food caused by

dull or dark bakeware

Lower oven temperature 25°F (15°C) or move rack to a higher

position in the oven.

Lighter browning of food caused

by shiny or light colored bakeware

Move rack to a lower position in the oven.

Batter distributed unevenly in pan Check that batter is level in the pan.

Incorrect length of cooking time

was used.

Adjust cooking time.

Oven door was not closed. Be sure that the bakeware does not keep the door from closing.

Oven door was opened during

cooking.

Oven peeking releases oven heat and can result in longer

cooking times.

Rack is too close to bake burner,

making baked items too brown on

bottom.

Move rack to higher position in the oven.

Pie crusts browning too quickly Use aluminum foil to cover the edge of the crust and/or reduce

baking temperature.

PROBLEM POSSIBLE CAUSES SOLUTIONS

Noises

ACCESSORIES

For accessories, you can visit our website at www.whirlpool.com/cookingaccessories.

WHIRLPOOL CORPORATION MAJOR APPLIANCE WARRANTY

LIMITED WARRANTY

For one year from the date of purchase, when this major appliance is operated and maintained according to instructions attached to or

furnished with the product, Whirlpool Corporation or Whirlpool Canada LP (hereafter “Whirlpool”) will pay for Factory Specified Parts and

repair labor to correct defects in materials or workmanship. Service must be provided by a Whirlpool designated service company. This

limited warranty is valid only in the United States or Canada and applies only when the major appliance is used in the country in which it

was purchased. Outside the 50 United States and Canada, this limited warranty does not apply. Proof of original purchase date is required

to obtain service under this limited warranty.

ITEMS EXCLUDED FROM WARRANTY

This limited warranty does not cover:

1. Service calls to correct the installation of your major appliance, to instruct you on how to use your major appliance, to replace or repair

house fuses, or to correct house wiring or plumbing.

2. Service calls to repair or replace appliance light bulbs, air filters or water filters. Consumable parts are excluded from warranty

coverage.

3. Repairs when your major appliance is used for other than normal, single-family household use or when it is used in a manner that is

contrary to published user or operator instructions and/or installation instructions.

4. Damage resulting from accident, alteration, misuse, abuse, fire, flood, acts of God, improper installation, installation not in accordance

with electrical or plumbing codes, or use of consumables or cleaning products not approved by Whirlpool.

PROBLEM POSSIBLE CAUSES SOLUTIONS

Surface burner making

popping noises

Wet burner Allow it to dry.

Gas range noises during Bake

and Broil operations

The following are some normal

sounds with the explanations.

These sounds are normal

operational noises that can be

heard each time the Bake or Broil

burners ignite during the cycle.

Pop Gas valve is opening or cycling

on and will make a single pop

when it snaps open from the

solenoid. It sounds similar to a

suction cup being pulled off of a

piece of glass.

This is normal.

Click The igniters will click several

times until the flame is detected.

These are short clicking sounds

like tapping a nail onto a piece of

glass.

This is normal.

Convection fan relay is cycling on

and off (on some models).

This is normal.

Woosh or poof Bake or Broil burner is igniting. This is normal.

Oven burner flames are yellow

or noisy

Range converted improperly If propane gas is being used, contact a service technician or

see cover for contact information.

affresh™ Stainless Steel Cleaner

(stainless steel models)

Order Part Number W10355016

affresh™ Stainless Steel Cleaning Wipes

(stainless steel models)

Order Part Number W10355049

affresh™ Kitchen and Appliance Cleaner

Order Part Number W10355010

AquaLift™ Technology Oven Cleaning Kit

Order Part Number W10423113RP

Granite Cleaner and Polish

Order Part Number W10275756

Gas Grate and Drip Pan Cleaner

Order Part Number 31617

Split Oven Rack

Order Part Number W10205524

Max Capacity Oven Rack

Order Part Number W10289145

Standard Flat Oven Rack

Order Part Number W10179196

Gourmet Griddle

Order Part Number 4396096RB

Porcelain Broiler Pan and Grid

Order Part Number 4396923

Premium Broiler Pan and Roasting

Rack

Order Part Number W10123240

www.whirlpool.com/broilerpan

5. Cosmetic damage, including scratches, dents, chips or other damage to the finish of your major appliance, unless such damage

results from defects in materials or workmanship and is reported to Whirlpool within 30 days from the date of purchase.

6. Any food loss due to refrigerator or freezer product failures.

7. Costs associated with the removal from your home of your major appliance for repairs. This major appliance is designed to be

repaired in the home and only in-home service is covered by this warranty.

8. Repairs to parts or systems resulting from unauthorized modifications made to the appliance.

9. Expenses for travel and transportation for product service if your major appliance is located in a remote area where service by an

authorized Whirlpool servicer is not available.

10. The removal and reinstallation of your major appliance if it is installed in an inaccessible location or is not installed in accordance with

published installation instructions.

11. Major appliances with original model/serial numbers that have been removed, altered or cannot be easily determined. This warranty is

void if the factory applied serial number has been altered or removed from your major appliance.

The cost of repair or replacement under these excluded circumstances shall be borne by the customer.

DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES

CUSTOMER'S SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR AS PROVIDED

HEREIN. IMPLIED WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE,

ARE LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW. WHIRLPOOL SHALL NOT BE LIABLE FOR INCIDENTAL

OR CONSEQUENTIAL DAMAGES. SOME STATES AND PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL

OR CONSEQUENTIAL DAMAGES, OR LIMITATIONS ON THE DURATION OF IMPLIED WARRANTIES OF MERCHANTABILITY OR

FITNESS, SO THESE EXCLUSIONS OR LIMITATIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL

RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE OR PROVINCE TO PROVINCE.

If outside the 50 United States and Canada, contact your authorized Whirlpool dealer to determine if another warranty applies. 9/07

For additional product information, in the U.S.A., visit www.whirlpool.com

In Canada, visit www.whirlpool.ca

If you do not have access to the Internet and you need assistance using your product or you would like to schedule service, you may

contact Whirlpool at the number below.

Have your complete model number ready. You can find your model number and serial number on the label, located on the oven frame

behind the top right side of the oven door.

For assistance or service in the U.S.A., call 1-800-253-1301. In Canada, call 1-800-807-6777.

If you need further assistance, you can write to Whirlpool with any questions or concerns at the address below:

In the U.S.A.:

Whirlpool Brand Home Appliances

Customer eXperience Center

553 Benson Road

Benton Harbor, MI 49022-2692

In Canada:

Whirlpool Brand Home Appliances

Customer eXperience Centre

200 - 6750 Century Ave.

Mississauga, Ontario L5N 0B7

Please include a daytime phone number in your correspondence.

Please keep this User Instructions and model number information for future reference.

MERCI d'avoir acheté ce produit de grande qualité. Si vous rencontrez un problème non abordé à la section DÉPANNAGE, veuillez

visiter notre site Web à www.whirlpool.ca pour obtenir des informations supplémentaires. Si vous avez toujours besoin d'aide,

composez le 1-800-807-6777.

Vous aurez besoin des numéros de modèle et de série situés sur le châssis du four, derrière la partie supérieure droite de la

porte du four.

INSTRUCTIONS D'UTILISATION

DE LA CUISINIÈRE À GAZ

Table des matières

SÉCURITÉ DE LA CUISINIÈRE............................................................ 19

La bride antibasculement................................................................... 20

GUIDE DES CARACTÉRISTIQUES ..................................................... 21

UTILISATION DE LA TABLE DE CUISSON ........................................ 23

Brûleurs de surface scellés ................................................................ 23

Taille du brûleur.................................................................................. 24

Ustensiles de cuisson ........................................................................ 24

Mise en conserve à la maison............................................................ 25

UTILISATION DU FOUR ....................................................................... 25

Commandes électroniques du four ................................................... 25

Mode Sabbat...................................................................................... 26

Papier d’aluminium............................................................................. 27

Positionnement des grilles et des ustensiles de cuisson au four...... 27

Évent du four ...................................................................................... 28

Cuisson au four et rôtissage .............................................................. 28

Cuisson au gril.................................................................................... 28

Cuisson et rôtissage par convection ................................................. 29

Cuisson minutée (sur certains modèles)............................................ 29

ENTRETIEN DE LA CUISINIÈRE ......................................................... 30

Programme de nettoyage .................................................................. 30

Nettoyage général .............................................................................. 31

Lampe du four .................................................................................... 32

DÉPANNAGE......................................................................................... 32

ACCESSOIRES...................................................................................... 35

GARANTIE ............................................................................................. 35

SÉCURITÉ DE LA CUISINIÈRE

Risque possible de décès ou de blessure grave si vous ne

suivez pas immédiatement les instructions.

Risque possible de décès ou de blessure grave si vous

ne suivez pas les instructions.

Tous les messages de sécurité vous diront quel est le danger potentiel et vous disent comment réduire le risque de blessure et

ce qui peut se produire en cas de non-respect des instructions.

Votre sécurité et celle des autres est très importante.

Nous donnons de nombreux messages de sécurité importants dans ce manuel et sur votre appareil ménager. Assurez-vous de

toujours lire tous les messages de sécurité et de vous y conformer.

AVERTISSEMENT

DANGER

Voici le symbole d’alerte de sécurité.

Ce symbole d’alerte de sécurité vous signale les dangers potentiels de décès et de blessures graves à vous

et à d’autres.

Tous les messages de sécurité suivront le symbole d’alerte de sécurité et le mot “DANGER” ou

“AVERTISSEMENT”. Ces mots signifient :

AVERTISSEMENT : Si les renseignements dans ce manuel ne sont pas exactement

observés, un incendie ou une explosion peut survenir, causant des dommages au

produit, des blessures ou un décès.

– Ne pas entreposer ni utiliser de l’essence ou d’autres vapeurs ou liquides inflammables

à proximité de cet appareil ou de tout autre appareil électroménager.

– QUE FAIRE DANS LE CAS D’UNE ODEUR DE GAZ :

•

Ne pas tenter d’allumer un appareil.

•

Ne pas toucher à un commutateur électrique.

•

Ne pas utiliser le téléphone se trouvant sur les lieux.

•

Appeler immédiatement le fournisseur de gaz à partir du téléphone d'un voisin. Suivre

ses instructions.

•

À défaut de joindre votre fournisseur de gaz, appeler les pompiers.

– L’installation et l’entretien doivent être effectués par un installateur qualifié, une agence

de service ou le fournisseur de gaz.

AVERTISSEMENT : L’odorat ne permet pas toujours la détection d’une fuite de gaz.

Les distributeurs de gaz recommandent l’emploi d’un détecteur de gaz (homologation UL ou CSA).

Pour d’autre information, contacter le fournisseur de gaz local.

En cas de détection d’une fuite de gaz, exécuter les instructions “Que faire dans le cas d’une odeur de gaz”.

La bride antibasculement

Dans des conditions de service normales, la cuisinière ne bascule pas. Elle peut cependant basculer si une force ou un poids excessif est

appliqué sur la porte ouverte alors que la bride antibasculement n’est pas convenablement fixée.

Avertissements de la proposition 65 de l'État de Californie :

AVERTISSEMENT : Ce produit contient au moins un produit chimique connu par l’État de Californie pour être à l’origine de

cancers.

AVERTISSEMENT : Ce produit contient au moins un produit chimique connu par l’État de Californie pour être à l’origine de

malformations et autres déficiences de naissance.

Risque de basculement

Un enfant ou une personne adulte peut faire basculer la cuisinière, ce qui peut causer un

décès.

Vérifier que la bride antibasculement est bien installée et engagée, conformément aux

instructions d'installation.

Réengager la bride antibasculement si la cuisinière a été déplacée.

Ne pas faire fonctionner la cuisinière si la bride antibasculement n'est pas installée et engagée.

Le non-respect de ces instructions peut causer un décès ou des brûlures graves aux enfants et

aux adultes.

Pour vérifier que la bride antibasculement est bien installée et engagée :

• Faire glisser la cuisinière vers l'avant.

• Vérifier que la bride antibasculement est bien fixée au plancher ou au mur.

• Faire de nouveau glisser la cuisinière vers l'arrière de sorte que le pied de la cuisinière

se trouve sous la bride antibasculement.

• Voir les instructions d'installation pour plus de détails.

AVERTISSEMENT

Bride

antibasculement

Pied de la cuisinière

La page est en cours de chargement...

Whirlpool WFG540H0ES Mode d'emploi

Marque: Whirlpool

Modèle: WFG540H0ES

Catégorie: Cuisinières

Taper: Mode d'emploi

Télécharger le PDF

rapport

dans d''autres langues

English: Whirlpool WFG540H0ES User guide

Whirlpool WFG540H0ES Mode d'emploi

Whirlpool WFG540H0ES Mode d'emploi

dans d''autres langues

Documents connexes

Autres documents