Huion KAMVAS 16 GS1562 Graphic Pen Display Drawing Tablet Manuel utilisateur

2

26

47

68

89

110

User Manual

Benutzerhandbuch

Manuel d' utilisateur

ユーザーマニュアル

Manuale d' uso

Manual de Usuario

GS1562

KAMVAS 16 (2021)

GS1562

2

EN

Contents

1 / Precautions ..................................................................................................................................3

2 / Product Overview .......................................................................................................................4

2.1 Display Introduction ................................................................................................................................. 4

2.2 Product and Accessories ........................................................................................................................4

2.3 Setting Up Display ....................................................................................................................................8

2.4 Install Driver ................................................................................................................................................8

3 / Pen Basic Operation ..................................................................................................................9

3.1 Hold the Pen ................................................................................................................................................ 9

3.2 Position the Cursor ....................................................................................................................................9

3.3 Click ............................................................................................................................................................. 10

3.4 Move ............................................................................................................................................................ 10

3.5 Use the Side Buttons ............................................................................................................................. 10

3.6 Pen Nib Replacement ........................................................................................................................... 11

4 / OSD Buttons ..............................................................................................................................11

5 / Function Setting ......................................................................................................................12

5.1 Working Area Setting ............................................................................................................................ 12

5.2 Display Setting ......................................................................................................................................... 14

5.3 Pen Buttons Function Setting ............................................................................................................ 16

5.4 Enable the Windows Ink Feature ...................................................................................................... 16

5.5 Pressure Sensitivity Setting ................................................................................................................. 17

5.6 Pen Pressure Testing ............................................................................................................................. 18

5.7 Pen Nib Activity Setting ........................................................................................................................ 18

5.8 Data Export and Import ........................................................................................................................ 19

6 / Specifications ...........................................................................................................................20

7 / Trouble Shooting .....................................................................................................................21

8 / After-service Contact .............................................................................................................24

GS1562

3

EN

【Please read this manual carefully before using, and keep it well for future reference.】

/ Precautions

1

--Before cleaning the display, please unplug the USB cable and wipe with a soft damp cloth, do

not use any kind of detergents.

--Please don't place the display near water sources such as bathtub, washbasin, sinks, washing

machine, damp basement, swimming pool, etc.

--Do not place the display on where is unstable or a height for children reaching easily in order to

avoid danger.

--Do not place the display and digital pen close to the magnetic field.

--The grooves and holes on the back case is designed for ventilation to prevent the monitor from

overheating. Please don't place the display on beds, sofas, carpets or in embedded device.

--Only power supplies shown on the nameplate can be used for the display. If you have questions

about the power supply which you are using, please consult the distributor of your display.

--To protect your display, please switch off the power when it is not in use. During blackouts or not

using for long time, please unplug the display from the socket.

--Make sure no foreign bodies get inside the monitor through grooves and prevent liquid from

splashing on the display as to prevent short-circuit or fire.

--If the display has a breakdown, do not open the main case and try to repair it by yourself. Please

ask for a service for proper repair and maintenance.

--When the following situations occur, please unplug the power adapter and you may need a

service for full repair and maintenance:

A. The power wire or plug is damaged or worn out;

B. There is liquid splashed inside of the display;

C. The display has fallen or the LCD is broken;

D. When obvious abnormalities occur to the display.

--While getting the components replaced, you are supposed to guarantee that the repairman

is using the substitute components specified by the manufacturer. Unauthorized component

replacement might cause fire, electric shocks or other dangers.

GS1562

4

EN

/ Product Overview

2

2.1 Display Introduction

Thanks for choosing HUION® KAMVAS® 16 (2021) creative display. This is a new generation

professional drawing display, which can greatly improve your work efficiency of painting

and creation, and full of fun. You can freely paint and write, depicting different lines and

colors, just as the pen writes on the paper, which brings you a real shock experience.

To give you a better understanding and using of your display, please read this user manual

carefully. The user manual only shows the information under Windows, unless otherwise

specified, this information applies to both Windows and Mac systems.

2.2 Product and Accessories

2.2.1 Tablet Overview

GS1562

5

EN

2.2.1 Accessories

Battery-free pen Replacement Nibs

(inside the pen holder) Pen Holder

Quick Start Guide

Warranty Card

USB Extension Cable

Cleaning Cloth

Pen Nib Clip

(inside the pen holder)

3-in-1 Cable

USB-C Cable Power Cable Power Adapter

GS1562

6

EN

2.2.3 Adjustable Stand (Optional)

We designed this ergonomic adjustable stand specially for your KAMVAS display, you can

adjust the angle of the display according to your usage habit, and make you feel more

comfortable when painting and creating.

① ②

③ ④

2.2.2 3-in-1 Cable

① USB (Data) ② USB (Power) ③ HDMI ④ Type-C

①

②

③

④

GS1562

7

EN

2.3 Display Connection

Connect the pen display to your computer with 3-in-1 Cable or USB-C to USB-C Cable.

[1] Connect the pen display to your computer with 3-in-1 Cable.

[2] Connect the display to your computer with USB-C to USB-C cable.

GS1562

8

EN

2.4.3 Driver Page

After the download is successful, double-click to open the driver, connect the display to

your computer with attached cables.

When the connection is complete, watch for a prompt at the bottom left of the driver

page that display two states "Device disconnected" or "Device connected".

Notes:

[1] Before installing, you need to uninstall other driver of similar products, including the

old driver of this product.

[2] Before installing, please close all graphics software and anti-virus software to avoid

unnecessary mistake.

2.4 Install Driver

2.4.1 OS Support

Windows 7 or later, macOS 10.12 or later.

2.4.2 Install Driver

Please download the driver from our website: www.huion.com/download

After finishing installation, you can find the driver icon " " in the system tray area, which

means the driver was installed successfully; when you connect the display to computer,

the icon will change to color " ", which means the driver has already recognized the

display and you can start using it now.

GS1562

9

EN

3

3.1 Hold the pen

Hold the pen as you hold a normal pen or pencil. Adjust your grip so that you can toggle

the side switch easily with your thumb or forefinger. Be careful not to accidentally press

the switch while drawing or positioning with the pen.

Notice:

When not in use, place the pen in the pen case or on the desk. Do not place the pen

on the surface of screen, which may interfere with the use of other screen cursor

positioning equipment, may also cause your computer can not enter the sleep mode.

3.2 Position the cursor

Move the pen slightly above the active area without touching the screen surface, the

cursor will move to the new position accordingly.

Press the pen tip on the screen to make a selection. Tap the screen once with the pen

tip, or touch it to the screen with enough pressure to register a click.

/ Pen Basic Operation

GS1562

10

EN

3.3 Click

Use the pen tip to tap once on the screen to register a click. Tap to highlight or

select an item on the screen and double-click to open it.

3.4 Move

Select the object, then slide the pen tip across the screen to move it.

3.5 Use the side buttons

The buttons on the pen can be set to two different customizable functions.

You can use the buttons whenever the pen tip is within 10mm of the display active area.

You do not have to touch the pen tip to the display in order to use the switch.

GS1562

11

EN

3.6 Pen Nib Replacement

The nib will be worn off after using for a long time, then you need to replace a new nib.

[1] Anticlockwise rotate the pen holder to open the cover, take a new nib out.

[2] Insert the pen nib into the pen nib clip and tilt the pen to pull out the old nib.

[3] Insert the new nib straight into the pen and push the nib slowly and firmly

until it stops.

GS1562

12

EN

4/ Display features overview

4.1 Power Button

The power button was placed on the left side of the digital screen, you need to turn on the

power switch before using.

4.2 Press Keys

There are 8 press keys on the top left side of the display, which you can modify the

functions according to your own habits, thus will help to improve your work efficiency.

4.3 OSD Function

Enter OSD Menu:

[1] Press K5 & K6 for around three seconds until the OSD menu appears and meanwhile

the indicator will flash green. The function of K1 K2 K3 K4 will become OSD function.

[2] In the menu, the function of K1 K2 K3 K4 will become as the following:

K1 AUTO: Before entering menu, its function is "auto adjustment".

After entering menu, its function is "back to previous menu".

K2 MENU: Press to call up the menu, after entering menu, its function is "confirm".

K3 - : After entering menu, its function is "down/left/decrease".

K4 + : After entering menu, its function is "up/right/increase".

Exit OSD Menu:

[3] Press K5 & K6 again for around three seconds until the OSD menu disappears, the

function of K1 K2 K3 K4 will become shortcuts function again.

GS1562

13

EN

5/ Function Setting

5.1 Working Area Setting

5.1.1 Using Multiple Monitors

Select the Working Area tab to define the relationship between pen movement on the

display and cursor movement on the monitor screen.

By default the entire active area of display maps to the entire monitor. If more than one

monitor is in use and you are in extended mode, you need to choose the related monitor

on the driver interface which you are going to map to.

If your monitors are in mirror mode (All monitors display the same content), the display

maps to the entire space on each monitor and the screen cursor is displayed on each

monitor simultaneously.

5.1.2 Working Area Setting

Define the display area that will be mapped to the screen area.

[1] Full Area: the entire active area of the display. This is the default setting.

[2] Screen Ratio: As a general rule, be 16:9.

[3] Customized Area:

1> Enter coordinate values.

2> Drag the corners of the foreground graphic to select the screen area.

GS1562

14

EN

5.1.3 Rotate Working Area

By changing the direction of the display to adapt to the left and right hand operation. You

can rotate the display by 0°, 90°, 180° or 270°.

5.2 Display Setting

Click the " " in the upper right corner of the driver to set the Display, including General

settings, Hotkeys and Updates.

①

②

③

GS1562

15

EN

5.2.1 General settings

[1] Add App: Shortcut key function can be set by adding different programs.

When opening different programs, the driver will automatically recognize that the shortcut

function is the corresponding function set.

[2] OSD Adjustment: Click on the "Activate the OSD" button and then you can adjust the

screen, scene mode, brightness, contrast and color.

Start OSD

OSD Adjustment

Start OSD

OSD Adjustment

GS1562

16

EN

5.2.2 Hotkeys settings

Set the shortcut key to quickly open the driver interface. The default value is Ctrl+Alt+H,

which can be set according to usage habits.

5.2.3 Updates

You can view the driver version number, click "Check for Update", view the latest

driver version, and update according to the system prompt.

GS1562

17

EN

5.3 Pen Buttons Function Setting

Select the function to be achieved on the pop-up dialog box, then click "Apply" or "OK" to

take effect.

5.4 Enable the Windows Ink Feature

Microsoft Windows provides extensive support for pen input. Pen features are supported

in such as Microsoft Office, Windows Journal, Adobe Photoshop CC, SketchBook 6 and so

on.

GS1562

18

EN

5.5 Pressure Sensitivity Setting

The pressure sensitivity will be changed by dragging the slider up and down, the smaller

the value, the more pressure sensitive.

Drag upward (left): the pressure change is more obvious, small pressure produces a great

pressure.

Drag down (right): pressure change is weak, a lot of pressure produces less pressure.

Click the button at the bottom right of the Settings box to reset the pressure

sensitivity to the default state.

For example: apply *N respectively the same pressure, under different pressure coefficient

produced different pressure effects. According to their habit of holding the pen posture

and the size of the hand for the appropriate pressure Settings.

Same press*N

Pressure 1

Same press*N

Pressure 2

*N *N

Press Sensitivity Adjustment Press Sensitivity Adjustment

GS1562

19

EN

5.6 Pen Pressure Testing

You can gradually apply pressure to the stylus on the screen to test the pressure level.

Click " " button to clear all the ink.

5.7 Pen Nib Activity Setting

The pen nibs can be set to be Active/Inactive as needed.Click the drop-down option to

select, and click OK again to save the Settings. In Active mode, the digital pen can be used

normally. In Inactive mode, the digital pen has cursor movement, but cannot complete the

specified action.

GS1562

20

EN

5.8 Data Export and Import

The driver supports exporting and importing your custom configuration data of the

product, which is convenient for you to use different software and avoid the trouble of

repeated settings.

La page est en cours de chargement...

Huion KAMVAS 16 GS1562 Graphic Pen Display Drawing Tablet Manuel utilisateur

Ce manuel convient également à

Huion KAMVAS 16 GS1562 Graphic Pen Display Drawing Tablet Manuel utilisateur

dans d''autres langues

Documents connexes