Zebra MPACT-INDR3 Bluetooth Beacon Mode d'emploi

Marque: Zebra

Modèle: MPACT-INDR3 Bluetooth Beacon

Taper: Mode d'emploi

ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies Corp., registered in many jurisdictions

MPACT-INDR3 Regulatory Guide

Regulatory Information

This device is approved under Zebra Technologies Corporation.

This guide applies to the following model number: MPACT-INDR3

All Zebra devices are designed to be compliant with the rules and

regulations in the locations they are sold and will be labeled as required.

Local language translation / Tradução do idioma local / Übersetzung in die

lokale Sprache / Raduccion de idioma local / Traduction en langue locale

/ Prijevod na lokalni jezik / Traduzione in lingua locale / 現地語の翻訳 /

현지 언어 번역 / Перевод на местный язык / 本地語言翻譯 / 本地语言翻

译 / Yerel dil çeviri /Tłumaczenie na język lokalny :

www.zebra.com/support

Any changes or modifications to Zebra equipment not expressly approved

by Zebra could void the user’s authority to operate the equipment.

Declared maximum operating temperature: 50°C

Bluetooth® Wireless Technology

This is an approved Bluetooth® product. For more information on the

Bluetooth SIG listing, please visit www.bluetooth.com.

Regulatory Markings

Regulatory markings subject to certification are applied to the device

signifying the radio(s) is/are approved for use. Refer to the Declaration of

Conformity (DoC) for details of other country markings. The DOC is

available at: www.zebra.com/doc.

Health and Safety Recommendations

Safety in Hospitals and Aircraft

NOTE: Wireless devices transmit radio frequency energy that

may affect medical electrical equipment and aircraft’s operation.

Wireless devices should be switched off wherever you are

requested to do so in hospitals, clinics, healthcare facilities or by

airline staff. These requests are designed to prevent possible interference

with sensitive equipments.

RF Exposure Guidelines

Safety Information

Reducing RF Exposure – Use Properly

Only operate the device in accordance with the instructions supplied.

The device complies with internationally recognized standards covering

human exposure to electromagnetic fields. For information on

international human exposure to electromagnetic fields, refer to the Zebra

Declaration of Conformity (DoC) at www.zebra.com/doc.

For further information on the safety of RF energy from wireless devices,

refer to RF exposure and assessment standards section at

www.zebra.com/responsibility.

Marking and European Economic Area (EEA)

Statement of Compliance

Zebra hereby declares that this radio equipment is in compliance with

Directives 2014/53/EU and 2011/65/EU.

Any radio operation limitations within EEA countries are identified in

Appendix A of EU Declaration of Conformity. The full text of the EU

Declaration of Conformity is available at: www.zebra.com/doc.

Waste Electrical and Electronic Equipment (WEEE)

For EU Customers: For products at the end of their life, please refer to

recycling/disposal advice at: www.zebra.com/weee.

United States and Canada Regulatory

Radio Frequency Interference Notices

This device complies with Part 15 of the FCC Rules. Operation is subject

to the following two conditions: (1) this device may not cause harmful

interference, and (2) this device must accept any interference received

including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to Part 15 of

the FCC rules.These limits are designed to provide reasonable

protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

Radio Frequency Interference Requirements – Canada

Innovation, Science and Economic Development Canada ICES-003

Compliance Label: CAN ICES-3 ([B])/NMB-3([B])

This device complies with Innovation, Science and Economic

Development Canada’s licence-exempt RSSs. Operation is subject to the

following two conditions: (1) This device may not cause interference; and

(2) This device must accept any interference, including interference that

may cause undesired operation of the device.

L’émetteur/récepteur exempt de licence contenu dans le présent appareil

est conforme aux CNR d’Innovation, Sciences et Développement

économique Canada applicables aux appareils radio exempts de licence.

L’exploitation est autorisée aux deux conditions suivantes : (1) l'appareil

ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit

accepter tout brouillage radio électrique subi même si le brouillage est

susceptible d'en compromettre le fonctionnement.

MPACT-INDR3 Regulatory Guide

RF Exposure Requirements - FCC and ISED

The FCC has granted an Equipment Authorization for this device with all

reported SAR levels evaluated in compliance with the FCC RF emission

guidelines. SAR information on this device is on file with the FCC and can

be found under the Display Grant section of www.fcc.gov/oet/ea/fccid.

Brasil

Este equipamento não tem direito à proteção contra interferência

prejudicial e não pode causar interferência em sistemas devidamente

autorizados.

India

The sending and receiving of texts is supported in the following Indian

languages:

Assamese, Bengali, Gujarati, Hindi, Kannada, Kashmiri, Konkani,

Malayalam, Manipuri, Marathi, Nepali, Oriya, Punjabi, Sanskrit, Sindhi,

Tamil, Telugu, Urdu, Bodo, Santhali, Maithili, and Dogri.

México

La operación de este equipo está sujeta a las siguientes dos condiciones:

(1) es posible que este equipo o dispositivo no cause interferencia

perjudicial y (2) este equipo o dispositivo debe aceptar cualquier

interferencia, incluyendo la que pueda causar su operación no deseada.

Warranty

For the complete Zebra hardware product warranty statement,

go to: zebra.com\warranty.

Service Information

Before you use the unit, it must be configured to operate in your facility's

network and run your applications.

If you have a problem running your unit or using your equipment, contact

your facility's Technical or System Support. If there is a problem with the

equipment, they will contact Zebra support at zebra.com\support.

For the latest version of the guide go to: zebra.com\support.

Software Support

Zebra wants to ensure that customers have the latest entitled software at

the time of device purchase in order to keep the device operating at peak

performance levels. To confirm that your Zebra device has the latest

entitled software available at the time of purchase, visit

www.zebra.com/support.

Check for the latest software from Support > Products, or search for the

device and select Support > Software Downloads.

If your device does not have the latest entitled software as of your device

purchase date, e-mail Zebra at [email protected] and

ensure you include the following essential device information:

•Model number

•Serial number

•Proof of purchase

•Title of the software download you are requesting.

If it is determined by Zebra that your device is entitled to the latest version

of software, as of the date you purchased your device, you will receive an

e-mail containing a link directing you to a Zebra Web site to download the

appropriate software.

Additional Information

For information on using this product, refer to the product guide available

at: www.zebra.com/support

Zebra MPACT-INDR3 Bluetooth Beacon Mode d'emploi

Marque: Zebra

Modèle: MPACT-INDR3 Bluetooth Beacon

Taper: Mode d'emploi

Télécharger le PDF

rapport

dans d''autres langues

English: Zebra MPACT-INDR3 Bluetooth Beacon User guide

Zebra MPACT-INDR3 Bluetooth Beacon Mode d'emploi

Zebra MPACT-INDR3 Bluetooth Beacon Mode d'emploi

dans d''autres langues

Documents connexes