Parkside PSTDA 20-Li A1 Original Instructions Manual

IAN 279504

CORDLESS JIGSAW PSTDA 20-Li A1

CORDLESS JIGSAW

Translation of the original instructions

BATTERIDREVEN PENDULSTIKSAV

Oversættelse af den originale driftsvejledning

AKKU-PENDELHUBSTICHSÄGE

Originalbetriebsanleitung

SCIE SAUTEUSE PENDULAIRE

SANS FIL

Traduction des instructions d’origine

ACCU-DECOUPEERZAAG

MET PENDELSLAG

Vertaling van de originele gebruiksaanwijzing

GB / IE/NI Translation of the original instructions Page 1

DK Oversættelse af den originale driftsvejledning Side 13

FR / BE Traduction des instructions d’origine Page 25

NL / BE Vertaling van de originele gebruiksaanwijzing Pagina 39

DE / AT / CH Originalbetriebsanleitung Seite 53

Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of

the device.

Før du læser, vend siden med billeder frem og bliv bekendt med alle apparatets funktioner.

Avant de lire le mode d'emploi, ouvrez la page contenant les illustrations et familiarisez-vous ensuite avec

toutes les fonctions de l'appareil.

Vouw vóór het lezen de pagina met de afbeeldingen open en maak u vertrouwd met alle functies van het

apparaat.

Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen Sie sich anschließend mit allen

Funktionen des Gerätes vertraut.

A

BATTERY COMPATIBLE WITH ALL DEVICES OF THE SERIES „PARKSIDE X 20V TEAM“

t41&&%$03%-&44*.1"$5%3*--14#4"-J"

t$03%-&44)"..&3%3*--1"#)-J#

t$03%-&44%3*--1"#4-J$

t$03%-&44*.1"$5%3*7&31%44"-J"

t$03%-&44$*3$6-"34"81),4"-J"

t$03%-&44+*(4"8145%"-J"

t$03%-&444"#3&4"8144"-J"

t$03%-&44"/(-&(3*/%&3184"-J"

t$03%-&44.6-5*163104&500-1".'8-J"

20V max.

18V

PSTDA 20-Li A1

GB

│

IE

│

NI│ 1■

Contents

Introduction ......................................................2

Intended use ................................................................ 2

Features ................................................................... 2

Package contents ............................................................ 2

Technical data .............................................................. 2

General Power Tool Safety Warnings ................................3

1. Work area safety .......................................................... 3

2. Electrical safety ........................................................... 3

3. Personal safety ............................................................ 4

4. Power tool use and care .................................................... 4

5. Use and handling of the cordless electrical power tool ............................. 5

6. Service .................................................................. 5

Appliance-speciﬁc safety instructions for jigsaws .................................... 5

Safety guidelines for battery chargers ............................................ 5

Original accessories/auxiliary equipment ......................................... 6

Information on saw blades ..................................................... 6

Before use .......................................................6

Charging the battery pack (see ﬁg. A) ............................................ 6

Attaching/disconnecting the battery pack to/from the appliance ....................... 7

Checking the battery charge level ............................................... 7

Initial operation ..................................................7

Fitting/changing the saw blade ................................................. 7

Fitting the blade guard ........................................................ 7

Fitting the rip fence ........................................................... 7

Connecting the sawdust extractor ............................................... 7

Sawdust blowing function ..................................................... 7

Fitting the splinter guard ....................................................... 8

Fitting the sliding shoe ........................................................ 8

Use .............................................................8

Setting the cutting angle ....................................................... 8

Setting the stroke rate ......................................................... 8

Adjusting the pendulum stroke .................................................. 8

Switching on/oﬀ ............................................................. 8

Maintenance and cleaning ..........................................9

Kompernass Handels GmbH warranty ...............................9

Service .........................................................10

Importer ..................................................................10

Disposal ........................................................10

Translation of the original Conformity Declaration .....................11

Ordering a replacement battery ....................................12

Online ordering ............................................................12

Telephone ordering .........................................................12

PSTDA 20-Li A1

■ 2 │ GB

│

IE

│

NI

CORDLESS JIGSAW

PSTDA 20-Li A1

Introduction

Congratulations on the purchase of your new appli-

ance. You have chosen a high-quality product. The

operating instructions are part of this product. They

contain important information about safety, usage

and disposal. Before using the product, please

familiarise yourself with all operating and safety

instructions. Use the product only as described and

for the range of applications speciﬁed. Please also

pass these operating instructions on to any future

owner.

Intended use

This appliance is suitable for making straight and

curved cuts as well as mitre cuts of up to 45° in

angular workpieces made of plastic, wood or

light metal. This appliance is exclusively intended

for private use in dry indoor spaces. Observe the

guidelines on saw blade types. Any other usage of

or modiﬁcation to the appliance is deemed to be

improper and carries a signiﬁcant risk of accidents.

The manufacturer accepts no responsibility for

damage(s) attributable to misuse.

Features

Safety lock-out for ON/OFF switch

ON/OFF switch

Handle

Release button for battery pack

Battery pack

Extraction nozzle

Switch for sawdust blower

Footplate

Sliding shoe (removable)

Pendulum stroke switch

Rip fence

Guide roller

Saw blade

Splinter guard

Insertion openings (each incl. locking screw)

Guard rail

Quick-release chuck

Blade guard

Working light

Clamping screws

Toothing

Battery charge level button

Battery display LED

High-speed charger

Red charge control LED

Green charge control LED

Package contents

1 cordless jigsaw incl. extraction nozzle and adaptor

1 high-speed battery charger

1 battery pack

1 rip fence

2 saw blades for woodworking

1 saw blade for metalworking

1 hex key

1 splinter guard

1 operating manual

Technical data

Cordless jigsaw:

PSTDA 20-Li A1

Rated voltage: 20 V

(DC)

Rated idle stroke speed: n

0

0–2700 rpm

Stroke: 20 mm

Pendulum stroke: 3 stages and ﬁne-cut

setting

Cutting depth: wood/aluminium/metal:

80/12/5mm

Cuts: 0° - 15° - 30° - 45°

left/right

Use only the following battery to operate

the cordless tool: PAP 20 A1

Type: LITHIUM ION

Rated voltage: 20 V

(DC)

Capacity: 2.0 Ah

Cells: 5

Use only the following high-speed battery

charger to charge the cordless tool: PLG 20 A1

INPUT:

Rated voltage: 230–240 V

~

, 50 Hz

(alternating current)

Rated power

consumption: 65 W

Fuse (internal): 3.15 A

T3.15A

OUTPUT:

Rated voltage: 21.5 V (DC)

Rated current: 2.4 A

Charging time: approx. 60 min

Protection class: II / (double insulation)

PSTDA 20-Li A1

GB

│

IE

│

NI│ 3■

Noise emission value:

Noise measurement value determined in accor-

dance with EN 60745. The A-rated noise level of

the power tool is typically as follows:

Sound pressure level: L

PA

= 80dB (A)

Uncertainty K: K

PA

= 3 dB

Sound power level: L

WA

= 91 dB (A)

Uncertainty K: K

WA

= 3 dB

Wear hearing protection!

Total vibration value:

(vector total of three directions) determined in

accordance with EN 60745:

Cutting boards: a

h,B

= 5.9 m/s

2

Uncertainty K = 1.5 m/s

2

Cutting sheet metal: a

h,M

= 7.2 m/s

2

Uncertainty K = 1.5 m/s

2

NOTE

►

The vibration level speciﬁed in these instruc-

tions has been measured in accordance

with the standardised measuring procedure

speciﬁed in EN 60745 and can be used to

make equipment comparisons. The speciﬁed

vibration emission value can also be used to

make an initial exposure estimate.

WARNING!

► The vibration level will vary according to the

use of the power tool and may sometimes

be higher than the value speciﬁed in these

instructions. Regular use of the power tool in

this way may cause the user to underestimate

the vibration. Try to keep the vibration loads

as low as possible. Measures to reduce the

vibration load are, e.g. wearing gloves and

limiting the working time. Wherein all states

of operation must be included (e.g. times

when the power tool is switched oﬀ and times

where the power tool is switched on but run-

ning without load).

General Power

Tool Safety Warnings

WARNING!

► Read all safety warnings and all instructions.

Failure to follow the warnings and instruc-

tions may result in electric shock, ﬁre and/or

serious injury.

Save all warnings and instructions for future

reference.

The term "power tool" in the warnings refers to your

mains-operated (corded) power tool or battery-

operated (cordless) power tool.

1. Work area safety

a) Keep work area clean and well lit. Cluttered

or dark areas invite accidents.

b) Do not operate power tools in explosive atmo-

spheres, such as in the presence of ﬂammable

liquids, gases or dust. Power tools create sparks

which may ignite the dust or fumes.

c) Keep children and bystanders away while

operating a power tool. Distractions can cause

you to lose control.

2. Electrical safety

a) Power tool plugs must match the outlet.

Never modify the plug in any way.

Do not use any adapter plugs with earthed

(grounded) power tools. Unmodiﬁed plugs

and matching outlets will reduce risk of electric

shock.

b) Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators. There is an increased risk of elec-

tric shock if your body is earthed or grounded.

c) Do not expose power tools to rain or wet

conditions. Water entering a power tool will

increase the risk of electric shock.

PSTDA 20-Li A1

■ 4 │ GB

│

IE

│

NI

d) Do not abuse the cord. Never use the cord

for carrying, pulling or unplugging the power

tool. Keep cord away from heat, oil, sharp

edges or moving parts. Damaged or entangled

cords increase the risk of electric shock.

e) When operating a power tool outdoors, use

an extension cord suitable for outdoor use.

Use of a cord suitable for outdoor use reduces

the risk of electric shock.

f) If operating a power tool in a damp location

is unavoidable, use a residual current device

(RCD) protected supply. Use of an RCD reduces

the risk of electric shock.

3. Personal safety

a) Stay alert, watch what you are doing and

use common sense when operating a power

tool. Do not use a power tool while you are

tired or under the inﬂuence of drugs, alcohol

or medication. A moment of inattention while

operating power tools may result in serious

personal injury.

b) Use personal protective equipment. Always

wear eye protection. Protective equipment such

as dust mask, non-skid safety shoes, hard hat,

or hearing protection used for appropriate

conditions will reduce personal injuries.

c) Prevent unintentional starting. Ensure the

switch is in the oﬀ-position before connecting

to power source and/or battery pack, picking

up or carrying the tool. Carrying power tools

with your ﬁnger on the switch or energising

power tools that have the switch on invites ac-

cidents.

d) Remove any adjusting key or wrench before

turning the power tool on. A wrench or a key

left attached to a rotating part of the power tool

may result in personal injury.

e) Do not overreach. Keep proper footing and

balance at all times. This enables better control

of the power tool in unexpected situations.

f) Dress properly. Do not wear loose clothing or

jewellery. Keep your hair, clothing and gloves

away from moving parts. Loose clothes, jewel-

lery or long hair can be caught in moving parts.

g) If devices are provided for the connection of

dust extraction and collection facilities, ensure

these are connected and properly used. Use of

dust collection can reduce dust-related hazards.

4. Power tool use and care

a) Do not force the power tool. Use the correct

power tool for your application. The correct

power tool will do the job better and safer at

the rate for which it was designed.

b) Do not use the power tool if the switch does

not turn it on and oﬀ. Any power tool that can-

not be controlled with the switch is dangerous

and must be repaired.

c) Disconnect the plug from the power source

and/or the battery pack from the power tool

before making any adjustments, changing ac-

cessories or storing power tools. Such preven-

tive safety measures reduce the risk of starting

the power tool accidentally.

d) Store idle power tools out of the reach of

children and do not allow persons unfamiliar

with the power tool or these instructions to

operate the power tool. Power tools are dan-

gerous in the hands of untrained users.

e) Maintain power tools. Check for misalignment

or binding of moving parts, breakage of parts

and any other condition that may aﬀect the

power tool’s operation. If damaged, have

the power tool repaired before use. Many

accidents are caused by poorly maintained

power tools.

f) Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting

edges are less likely to bind and are easier to

control.

g) Use the power tool, accessories and tool bits,

etc. in accordance with these instructions,

taking into account the working conditions

and the work to be performed. Use of the

power tool for operations diﬀerent from those

intended could result in a hazardous situation.

PSTDA 20-Li A1

GB

│

IE

│

NI│ 5■

5. Use and handling of the cordless

electrical power tool

a) Charge a rechargeable battery unit using only

the charger recommended by the manufac-

turer. Chargers are often designed for a partic-

ular type of rechargeable battery unit. There is

the danger of ﬁre if other types of rechargeable

battery units are used.

b) Only the rechargeable battery units supplied

are to be used with an electrical power tool.

The use of other rechargeable battery units may

lead to the danger of injury or ﬁre.

c) When they are not being used, store re-

chargeable battery units away from paper-

clips, coins, keys, nails, screws or other small

metal objects that could cause the contacts

to be bridged. Short-circuiting the contacts of

a rechargeable battery unit may result in heat

damage or ﬁre.

d) Fluids may leak out of rechargeable battery

units if they are misused. If this happens, avoid

contact with the ﬂuid. If contact occurs, ﬂush

the aﬀected area with water. Seek additional

medical help if any of the ﬂuid gets into your

eyes. Escaping battery ﬂuid may cause skin

irritation or burns.

CAUTION! RISK OF EXPLOSION!

Never charge non-rechargeable

batteries!

Protect the rechargeable battery from

heat, for example from continuous

exposure to sunlight, ﬁre, water and

moisture. There is a risk of explosion.

6. Service

a) Have your power tool serviced by a qualiﬁed

repair person using only identical replace-

ment parts. This will ensure that the safety of

the power tool is maintained.

Appliance-speciﬁc safety instructions

for jigsaws

■ Hold the power tool by the insulated grip-

ping surfaces when carrying out work

during which the power tool may contact

hidden power cables.Contact with a live wire

may electrify exposed metal parts of the power

tool and could give the operator an electric

shock.

Safety guidelines for battery chargers

■ This appliance may be used by chil-

dren aged 8 years and above and

by persons with limited physical,

sensory or mental capabilities or

lack of experience and knowledge,

provided that they are under super-

vision or have been told how to use

the appliance safely and are aware

of the potential risks. Do not allow

children to use the appliance as a

toy. Cleaning and user maintenance

tasks may not be carried out by chil-

dren unless they are supervised.

■ To avoid potential risks, damaged

mains cables should be replaced

by the manufacturer, their customer

service department or a similarly

qualiﬁed person.

The charger is suitable for indoor use

only.

WARNING!

■ If the power cord requires replacement, this

should be carried out by the manufacturer or

an approved representative to avoid safety

hazards.

PSTDA 20-Li A1

■ 6 │ GB

│

IE

│

NI

Original accessories/auxiliary

equipment

■ Use only the accessories and additional

equipment that are speciﬁed in the operat-

ing instructions and are compatible with

the appliance.

Information on saw blades

The Parkside basic equipment includes saw blades

for use with wood and metal.

▯ 2 saw blades for general wood cutting

▯ 1 saw blade for light metals up to 5 mm

NOTE

► You can use any saw blade, provided it is

ﬁtted with a suitable mounting (single-lug

shank).

Saw blade type

suitable unsuitable

Before use

Charging the battery pack (see ﬁg. A)

CAUTION!

► Always unplug the appliance before you

remove the battery pack from or connect the

battery pack to the charger.

NOTE

► Never charge the battery pack if the ambient

temperature is below 10°C or above 40°C.

If a lithium-ion battery is to be stored for an

extended period, the charge level should be

checked regularly. The optimum charge level is

between 50% and 80%. The storage climate

should be cool and dry and the ambient

temperature should be between 0°C and

50°C.

♦ Connect the battery pack

to the high-speed

battery charger (see ﬁg. A).

♦ Insert the power plug into the socket. The control

LED

lights up red.

♦ The green LED

indicates that the charging

process is complete and the battery pack

is ready.

CAUTION!

♦ If the red control LED

ﬂashes, this means

that the battery pack has overheated and

cannot be charged.

♦ If the red and green control LEDs

both

ﬂash, this means that the battery pack is

broken.

♦ Push the battery pack

back into the appli-

ance.

■ Never recharge a battery pack again im-

mediately after rapid charging. There is a risk

that the battery pack will overheat and this will

reduce the lifespan of the battery.

♦ Switch oﬀ the charger for at least 15 minutes

between successive charging sessions.

To do this, disconnect the power plug.

PSTDA 20-Li A1

GB

│

IE

│

NI│ 7■

Attaching/disconnecting the battery

pack to/from the appliance

Inserting the battery pack:

♦ Allow the battery pack

to click into place in

the appliance.

Removing the battery pack:

♦ Press the release button

and remove the

battery pack.

Checking the battery charge level

♦ Press the battery charge level button to check

the status of the battery (see also main diagram).

The status will be shown on the battery display

LED as follows:

♦ RED/ORANGE/GREEN = maximum charge

RED/ORANGE = medium charge

RED = low charge – charge the battery

Initial operation

Fitting/changing the saw blade

Remove the battery before carrying out any work

on the power tool (e.g. maintenance, changing

tools, etc.) as well as during the transport and

storage of the power tool.

Unintentional activation of the ON/OFF switch

can result in injury.

♦ Press the blade guard together

at the height

of the outer catches and pull it oﬀ to the front.

♦ Turn the quick-release chuck

and hold it

in this position.

♦ Push the required saw blade into the quick-

release chuck

as far as the stop.

♦ Release the quick-release chuck

so that it

returns to its initial position. The saw blade is

now locked.

■ CAUTION! The saw blade teeth must face the

front (see fold-out page)!

Fitting the blade guard

Fit the blade guard before you connect the

appliance to a dust extractor.

♦ Fit the blade guard

onto the appliance

so that the two outer catches engage in the

recesses in the housing.

♦ Remove the blade guard

for working without

a dust extractor or when making mitre cuts.

To do this, press the blade guard together

at the height of the outer catches and pull it

oﬀ to the front.

Fitting the rip fence

The rip fence can be ﬁtted on the left or right

of the appliance.

♦ Undo both the clamping screws on the insertion

openings

.

♦ Push the rip fence

into the insertion openings

.

♦ Retighten the two locking screws.

Connecting the sawdust extractor

♦ Push the extraction nozzle into the vacuum

extraction duct until it is secured in place.

Optional, depending on the diameter of the

dust and sawdust extractor.

♦ Attach an approved dust and sawdust extractor

to the extraction nozzle

.

■

Wear a dust mask.

Supporting the extraction function:

♦ Press the sawdust blower switch

to the "O"

position.

Sawdust blowing function

Switching the sawdust blowing function on:

♦ Press the sawdust blower switch

to the

position.

PSTDA 20-Li A1

■ 8 │ GB

│

IE

│

NI

Fitting the splinter guard

The splinter guard can prevent the tearing up of

the surface when sawing wood. The splinter guard

can only be used with certain sawblade types

without the sliding shoe

and only at a cutting

angle of 0°.

♦ Press the splinter guard

into the footplate

from below (notch facing upwards).

Fitting the sliding shoe

When working on sensitive surfaces, you can ﬁt

the sliding shoe on the baseplate to prevent

scratching the surface.

♦ Mount the sliding shoe

onto the front of the

baseplate and press it up at the back until it

clicks into place on the baseplate .

♦ To remove the sliding shoe

, unfasten it at

the rear of the baseplate and slide it oﬀ the

front.

Use

Setting the cutting angle

♦ Undo the clamping screws with the supplied

hex key and pull the baseplate to the rear.

♦ Adjust the cutting angle to 0°/15°/30°/45°

with the aid of the markings on the baseplate

.

Push the baseplate forwards so that the

locking pin engages in the toothing .

♦ Retighten the clamping screws

with the hex

key.

NOTE

► When using a cutting angle of 15°/30°/

45°, the blade guard

and the splinter

guard must be detached beforehand.

Setting the stroke rate

The ON/OFF switch has a variable speed con-

trol. Press the ON/OFF switch lightly for a low

speed. Increasing the pressure increases the speed.

NOTE

► The integrated motor brake ensures rapid

stoppage.

Adjusting the pendulum stroke

♦ You can use the pendulum stroke switch

to adjust the pendulum movement of the saw

blade . You can achieve ﬁne, clean-cut edges

without pendulum movement (setting "0").

Deactivate pendulum movement when working

on thin workpieces. You can achieve an increas-

ingly fast work rate if the pendulum stroke is

activated (settings 1–3).

Switching on/oﬀ

Switching the appliance on:

♦ Push the safety lock-out

to the left or right

and keep it pressed.

♦ Press the ON/OFF switch

.

Once the saw is running, you can release

the safety lock-out . The working light

illuminates when the ON/OFF switch is

depressed lightly or completely. This provides

illumination of the work area in poor lighting

conditions.

Switching the appliance oﬀ:

Release the ON/OFF switch

.

PSTDA 20-Li A1

GB

│

IE

│

NI│ 9■

Maintenance and cleaning

WARNING! RISK OF INJURY! Always

switch the appliance oﬀ and remove

the battery before carrying out any

work on the appliance.

■ The appliance must always be kept clean, dry

and free from oil or grease.

■ Use a soft, dry cloth to clean the housing.

■ If a lithium-ion battery is to be stored for an

extended period, the charge level should be

checked regularly. The optimum charge level is

between 50% and 80%. The optimum storage

environment is cool and dry.

■ Clean the appliance after completing your

sawing work.

■ Remove any dirt (e.g. sawdust). If necessary,

clean the saw blade mount with a brush or

compressed air.

Kompernass Handels GmbH

warranty

Dear Customer,

This appliance has a 3-year warranty valid from

the date of purchase. If this product has any faults,

you, the buyer, have certain statutory rights. Your

statutory rights are not restricted in any way by the

warranty described below.

Warranty conditions

The validity period of the warranty starts from the

date of purchase. Please keep your original receipt

in a safe place. This document will be required as

proof of purchase.

If any material or production fault occurs within

three years of the date of purchase of the product,

we will either repair or replace the product for you

at our discretion. This warranty service is dependent

on you presenting the defective appliance and

the proof of purchase (receipt) and a short written

description of the fault and its time of occurrence.

If the defect is covered by the warranty, your product

will either be repaired or replaced by us. The repair

or replacement of a product does not signify the

beginning of a new warranty period.

Warranty period and statutory claims for

defects

The warranty period is not prolonged by repairs

eﬀected under the warranty. This also applies to

replaced and repaired components. Any damage

and defects present at the time of purchase must

be reported immediately after unpacking. Repairs

carried out after expiry of the warranty period shall

be subject to a fee.

Scope of the warranty

This appliance has been manufactured in accordance

with strict quality guidelines and inspected meticu-

lously prior to delivery.

The warranty covers material faults or production

faults. The warranty does not extend to product parts

subject to normal wear and tear or fragile parts such

as switches, batteries, baking moulds or parts made

of glass.

The warranty does not apply if the product has been

damaged, improperly used or improperly maintained.

The directions in the operating instructions for the

product regarding proper use of the product are

to be strictly followed. Uses and actions that are

discouraged in the operating instructions or which

are warned against must be avoided.

This product is intended solely for private use and

not for commercial purposes. The warranty shall be

deemed void in cases of misuse or improper handling,

use of force and modiﬁcations/repairs which have

not been carried out by one of our authorised

Service centres.

Warranty claim procedure

To ensure quick processing of your case, please

observe the following instructions:

■ Please have the till receipt and the item number

(e.g. IAN 12345) available as proof of purchase.

■ You will ﬁnd the item number on the type plate,

an engraving on the front page of the instructions

(bottom left), or as a sticker on the rear or

bottom of the appliance.

■ If functional or other defects occur, please

contact the service department listed either by

telephone or by e-mail.

PSTDA 20-Li A1

■ 10 │ GB

│

IE

│

NI

■ You can return a defective product to us free of

charge to the service address that will be provided

to you. Ensure that you enclose the proof of

purchase (till receipt) and information about

what the defect is and when it occurred.

You can download these instructions

along with many other manuals,

product videos and software on

www.lidl-service.com.

Service

WARNING!

► Have the power tool repaired by the service

centre or a qualiﬁed electrician and only

using genuine replacement parts. This will

ensure that the safety of the appliance is

maintained.

► Always ensure that the power plug or

the mains cable is replaced only by the

manufacturer of the appliance or by an

approved customer service provider. This

will ensure that the safety of the appliance is

maintained.

Service Great Britain

Tel.: 0871 5000 720 (£ 0.10/Min.)

E-Mail: k[email protected]

Service Ireland

Tel.: 1890 930 034

(0,08 EUR/Min., (peak))

(0,06 EUR/Min., (oﬀ peak))

E-Mail: k[email protected]

IAN 279504

Importer

Please note that the following address is not the

service address. Please contact the service

address provided.

KOMPERNASS HANDELS GMBH

BURGSTRASSE 21

44867 BOCHUM

GERMANY

www.kompernass.com

Disposal

The packaging is made from environmen-

tally friendly material and can be dis-

posed of at your local recycling plant.

Do not dispose of power tools in

your normal household waste!

European Directive 2012/19/EU requires that

worn-out power tools be collected separately and

recycled in an environmentally compatible manner.

Do not dispose of batteries in your

normal household waste!

Defective or worn-out rechargeable batteries must

be recycled according to Directive 2006/66/EC.

Take the battery pack and/or appliance to a nearby

collection facility.

Please consult your local authorities regarding

suitable disposal of worn out power tools/battery

packs.

PSTDA 20-Li A1

GB

│

IE

│

NI│ 11■

Translation of the original Conformity Declaration

We, KOMPERNASS HANDELS GMBH, document oﬃcer: Mr. Semi Uguzlu, BURGSTR. 21,

44867 BOCHUM, GERMANY, hereby declare that this product complies with the following standards,

normative documents and EC directives:

Machinery Directive

(2006/42/EC)

EC Low Voltage Directive

(2014/35/EU)

EMC (Electromagnetic Compatibility)

(2014/30/EU)

RoHS Directive

(2011/65/EU)*

*The manufacturer bears the full responsibility for compliance with this conformity declaration. The object

of the declaration described above complies with the requirements of the Directive 2011/65/EU of the Euro-

pean Parliament and Council of 8 June 2011 on the limitations of use of certain dangerous substances in

electrical and electronic appliances.

Applied harmonised standards:

EN 60745-1: 2009 / A11: 2010

EN 60745-2-11: 2010

EN 62233: 2008

EN 55014-1: 2006 / A2: 2011

EN 55014-2: 2015

EN 60335-1: 2012 / A11: 2014

EN 60335-2-29: 2004 / A2:2010

EN 61000-3-2: 2014

EN 61000-3-3: 2013

Type designation of machine:

Cordless jigsaw PSTDA 20-Li A1

Year of manufacture: 10 - 2016

Serial number: IAN 279504

Bochum, 30/09/2016

Semi Uguzlu

- Quality Manager -

We reserve the right to make technical changes in the context of further product development.

PSTDA 20-Li A1

■ 12 │ GB

│

IE

│

NI

Ordering a replacement battery

If you want to order a replacement battery for your appliance, you can do so easily via the Internet on

www.kompernass.com or by telephone.

The price of the replacement battery is €20, including VAT and shipping. Due to limited stocks, this item

may sell out in a relatively short time.

Online ordering

To order a replacement battery from the Accessories Shop:

■ Use your Internet browser to visit www.kompernass.com.

■ Click on the corresponding ﬂag on the right hand side at the bottom of the page to select the desired

country and language.

■ Click on the tab "Accessory Shop" and then select the appropriate replacement battery under the

heading "Topseller".

■ After you have placed the rechargeable battery in the shopping basket, click the "Checkout" button

and follow the on-screen instructions to complete the ordering process.

NOTE

► Online ordering of replacement parts is not possible in all countries. In this case, please contact the

Service hotline.

■ The promotion is limited to one battery per customer/appliance and also to a timeline of two months

after the promotion period. Thereafter, the replacement battery can be ordered as a replacement

part under other conditions.

Telephone ordering

Service Great Britain

Tel.: 0871 5000 720 (£ 0.10/Min.)

E-Mail: k[email protected]

Service Ireland

Tel.: 1890 930 034 (0,08 EUR/Min., (peak))

(0,06 EUR/Min., (oﬀ peak))

E-Mail: k[email protected]

To ensure that your order is processed swiftly, have the article number of your appliance to hand

(e.g. IAN 279504) in case of questions. The article number can be found on the type plate or the

title page of these instructions.

PSTDA 20-Li A1

DK │ 13 ■

Indholdsfortegnelse

Indledning ......................................................14

Anvendelsesområde ......................................................... 14

Udstyr ....................................................................14

Pakkens indhold ............................................................14

Tekniske data ..............................................................14

Generelle sikkerheds anvisninger til elværktøjer ......................15

1. Sikkerhed på arbejdspladsen ............................................... 15

2. Elektrisk sikkerhed ........................................................15

3. Personsikkerhed .......................................................... 16

4. Anvendelse og behandling af elværktøjet ......................................16

5. Anvendelse og behandling af det genopladelige værktøj .......................... 17

6. Service .................................................................17

Specielle sikkerhedsanvisninger for stiksave .......................................17

Sikkerhedsanvisninger for opladere .............................................17

Originalt tilbehør / originalt ekstraudstyr .........................................17

Oplysninger om savklinger .................................................... 17

Før første brug ..................................................18

Opladning af batteripakke (se ﬁg. A) ...........................................18

Indsætning / udtagning af den genopladelige batteripakke ..........................18

Kontrol af det genopladelige batteris tilstand. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Første brug .....................................................18

Montering/udskiftning af savklinge .............................................18

Montering af beskyttelsesafdækning ............................................19

Montering af parallelanslag ...................................................19

Tilslutning af spånudsugning ..................................................19

Spånblæsefunktion ..........................................................19

Montering af spånbeskytter ...................................................19

Montering af glidesko .......................................................19

Betjening .......................................................20

Indstilling af snitvinkel ........................................................20

Indstilling af slagfrekvens ..................................................... 20

Indstilling af pendulslag ......................................................20

Sådan tændes / slukkes produktet .............................................. 20

Vedligeholdelse og rengøring ......................................20

Garanti for Kompernass Handels GmbH .............................20

Service .........................................................22

Importør ..................................................................22

Bortskaﬀelse ....................................................22

Oversættelse af den originale overensstemmelseserklæring ............23

Bestilling af genopladeligt reservebatteri ............................24

Online-bestilling ............................................................ 24

Telefonisk bestilling .......................................................... 24

PSTDA 20-Li A1

■ 14 │ DK

BATTERIDREVEN

PENDULSTIKSAV PSTDA 20-Li A1

Indledning

Tillykke med købet af dit nye produkt. Du har valgt

et produkt af høj kvalitet. Betjeningsvejledningen er

en del af dette produkt. Den indeholder vigtige infor-

mationer om sikkerhed, anvendelse og bortskaﬀelse.

Du bør sætte dig ind i alle produktets betjenings- og

sikkerhedsanvisninger før brug. Brug kun produktet

som beskrevet og kun til de angivne anvendelsesom-

råder. Lad vejledningen følge med produktet, hvis du

giver det videre til andre.

Anvendelsesområde

Produktet er beregnet til lige og kurvede snit samt

geringssnit på op til 45° på kantede emner i plast,

træ og letmetal. Produktet er udelukkende beregnet

til privat brug i tørre rum. Vær opmærksom på anvis-

ningerne vedrørende savklingetyper. Enhver anden

anvendelse eller ændring af produktet anses for at

være uden for anvendelsesområdet og indebærer

betydelige farer for uheld. Producenten påtager

sig intet ansvar for skader, der opstår som følge af

anvendelse uden for anvendelsesområdet.

Udstyr

Startspærre for tænd-/sluk-knap

Tænd-/sluk-knap

Greb

Knap til frigørelse af batteripakke

Genopladelig batteripakke

Udsugningsstuds

Knap til spånblæseanordning

Bundplade

Glidesko (aftagelig)

Pendulslagsknap

Parallelanslag

Føringsrulle

Savklinge

Spånbeskytter

Indføringsåbninger (inkl. stopskrue)

Beskyttelsesbøjle

Hurtigskiftepatron

Beskyttelsesafdækning

Arbejdslys

Klemskruer

Fortanding

Knap til kontrol af batteriets tilstand

Display-LED for genopladeligt batteri

Hurtigoplader

Rød LED til kontrol af opladning

Grøn LED til kontrol af opladning

Pakkens indhold

1 batteridreven pendulstiksav inkl. udsugningsstuds

og adaptere

1 hurtigladeapparat til genopladelige batterier

1 pakke genopladelige batterier

1 parallelanslag

2 savklinger til træforarbejdning

1 savklinge til metalforarbejdning

1 sekskantnøgle

1 spånbeskytter

1 betjeningsvejledning

Tekniske data

Batteridreven pendulstiksav:

PSTDA 20-Li A1

Mærkespænding: 20 V

(jævnstrøm)

Tomgangsslagfrekvens: n

0

0 - 2700 min

-1

Slaglængde: 20 mm

Pendulslag: 3 trin og indstilling

af ﬁnsnit

Skæredybde: Træ/aluminium/metal:

80/12/5 mm

Snitvinkel: 0° - 15° - 30° - 45°

mod venstre/højre

Brug kun følgende genopladelige batteri til

drift af værktøjet: PAP 20 A1

Type: LITHIUM-ION

Mærkespænding: 20 V

(jævnstrøm)

Kapacitet: 2,0 Ah

Celler: 5

Brug kun følgende oplader til opladning af

værktøjets genopladelige batteri: PLG 20 A1

INDGANG / input:

Mærkespænding: 230 - 240 V

~

, 50 Hz

(vekselstrøm)

Nominelt eﬀektforbrug: 65 W

Sikring (intern): 3,15 A

T3.15A

UDGANG / output:

Mærkespænding: 21,5 V (jævnstrøm)

Mærkestrøm: 2,4 A

Opladningstid: ca. 60 min

Beskyttelsesklasse: II / (dobbeltisolering)

PSTDA 20-Li A1

DK │ 15 ■

Støjemissionsværdi:

Måleværdi for støj beregnet iht. ENISO 60745.

Det A-vægtede støjniveau for elværktøjet er typisk

som følger:

Lydtrykniveau: L

PA

= 80 dB (A)

Usikkerhed K: K

PA

= 3 dB

Lydeﬀektniveau: L

WA

= 91 dB (A)

Usikkerhed K: K

WA

= 3 dB

Bær høreværn!

Samlede vibrationsværdier:

(vektorsum i tre retninger) beregnet iht. EN60745:

Savning af spånplader: a

h,B

= 5,9 m/s

2

Usikkerhed K = 1,5 m/s

2

Savning af metalplader: a

h,M

= 7,2 m/s

2

Usikkerhed K = 1,5 m/s

2

BEMÆRK

► Vibrationsniveauet, som er angivet i disse

anvisninger, er målt med en målemetode, der

er standardiseret efter EN60745, og som kan

anvendes til sammenligning af elværktøjer. Den

angivne vibrationsemissionsværdi kan også

anvendes til en indledende vurdering af faren

ved vibrationsniveauet.

ADVARSEL!

► Vibrationsniveauet ændrer sig afhængigt

af elværktøjets anvendelse og kan i mange

tilfælde ligge over værdien, der er angivet

i disse anvisninger. Vibrationsbelastningen

kan undervurderes, hvis elværktøjet jævnligt

anvendes på denne måde. Prøv at holde

belastningen forårsaget af vibrationer så lav

som muligt. Vibrationsbelastningen kan f.eks.

reduceres ved brug af handsker under anven-

delse af værktøjet samt ved nedsættelse af

den tid, værktøjet bruges. Her skal der tages

hensyn til hele driftscyklussen (f.eks. perioder,

hvor elværktøjet er slukket, og perioder, hvor

det er tændt, men kører uden belastning).

Generelle sikkerheds-

anvisninger til

elværktøjer

ADVARSEL!

► Læs alle sikkerhedsanvisninger og -instruktio-

ner. Hvis de angivne sikkerhedsanvisninger og

-instruktioner ikke overholdes, kan det medføre

elektrisk stød, brand og/eller alvorlige kvæ-

stelser.

Opbevar sikkerhedsanvisningerne og

-instruktionerne til senere brug.

Begrebet "elværktøj", der anvendes i sikkerhedsanvis-

ningerne, henviser både til elværktøj, der anvendes

med ledning til lysnettet, og batteridrevet elværktøj

(uden strømledning).

1. Sikkerhed på arbejdspladsen

a) Hold arbejdspladsen ren og godt oplyst. Rod

og dårligt oplyste arbejdspladser kan medføre

uheld.

b) Arbejd aldrig med elværktøj i eksplosionsfarli-

ge omgivelser, hvor der beﬁnder sig brænd-

bare væsker, gasser eller støv. Elværktøj danner

gnister, som kan antænde støvet eller dampene.

c) Hold børn og andre personer på afstand, når

elværktøjet bruges. Hvis du bliver distraheret,

kan du miste kontrollen over produktet.

2. Elektrisk sikkerhed

a) Elværktøjets tilslutningsstik skal passe til stikkon-

takten. Stikket må ikke ændres på nogen måde.

Der må ikke bruges adapterstik sammen med

beskyttelsesjordet elværktøj. Uændrede stik

og de rigtige stikkontakter reducerer risikoen for

elektrisk stød.

b) Undgå kropskontakt med jordforbundne over-

ﬂader som f.eks. rør, radiatorer, komfurer og

køleskabe. Der er øget risiko for elektrisk stød,

hvis din krop har jordforbindelse.

c) Hold elværktøjet væk fra regn og fugt.

Hvis der trænger vand ind i elværktøjet, øges

risikoen for elektrisk stød.

PSTDA 20-Li A1

■ 16 │ DK

d) Brug ikke ledningen til noget, den ikke er

beregnet til, f.eks. til at bære eller hænge

værktøjet op i eller til at trække stikket ud af

stikkontakten. Hold ledningen på afstand af

varme, olie, skarpe kanter eller produktets

bevægelige dele. Beskadigede eller sammenﬁl-

trede ledninger øger risikoen for elektrisk stød.

e) Hvis du anvender elværktøj udendørs, skal

der bruges en forlængerledning, som er god-

kendt til brug udendørs. Når du anvender en

forlængerledning, der er beregnet til udendørs

brug, reduceres risikoen for elektrisk stød.

f) Hvis det ikke er muligt at undgå at bruge

elværktøjet i fugtige omgivelser, skal der

installeres en fejlstrømsafbryder. Installation

af en fejlstrømsafbryder reducerer risikoen for

elektrisk stød.

3. Personsikkerhed

a) Vær altid opmærksom og bevidst om, hvad du

laver, og arbejd fornuftigt med elværktøjet.

Brug ikke elværktøjet, hvis du er ukoncentreret

eller påvirket af narkotika, alkohol eller medi-

cin. Selv et øjebliks uopmærksomhed ved brug

af elværktøjet kan medføre alvorlige kvæstelser.

b) Brug personligt beskyttelsesudstyr, og bær altid

beskyttelsesbriller. Når du bruger personligt be-

skyttelsesudstyr som f.eks. støvmaske, skridsikre

sikkerhedssko, beskyttelseshandsker, sikkerheds-

hjelm og høreværn afhængigt af elværktøjets type

og anvendelse, reduceres risikoen for kvæstelser.

c) Undgå uønsket igangsætning. Kontrollér, at el-

værktøjet er slukket, før du forbinder det med

elforsyningen og/eller tilslutter batteriet, tager

elværktøjet op eller bærer det. Hvis du har

en ﬁnger på kontakten, eller hvis elværktøjet er

tændt, mens du bærer det, kan der opstå uheld.

d) Fjern indstillingsværktøj eller skruenøgler, før

du tænder for elværktøjet. Hvis der sidder et

værktøj eller en skruenøgle på en roterende del

af elværktøjet, kan det medføre personskader.

e) Undgå unormale kropsstillinger. Sørg for, at

du står sikkert, og hold altid balancen. Derved

kan du bedre kontrollere elværktøjet i uventede

situationer.

f) Bær velegnet påklædning. Bær ikke løstsid-

dende tøj eller smykker. Hold hår, tøj og hand-

sker på afstand af dele, der bevæger sig. Løst

tøj, smykker eller hår kan gribes fat af dele, der

bevæger sig.

g) Hvis der monteres opsugnings- og opsamlings-

anordninger, skal disse tilsluttes og anvendes

korrekt. Anvendelse af denne type anordninger

nedsætter støvrisikoen.

4. Anvendelse og behandling af

elværktøjet

a) Overbelast ikke elværktøjet. Brug et elværk-

tøj, der er egnet til arbejdet. Du arbejder bed-

re og mere sikkert i det angivne eﬀektområde,

hvis du bruger det rigtige elværktøj.

b) Brug ikke elværktøj med defekt kontakt.

Elværktøj, som ikke længere kan tændes og

slukkes, er farligt og skal repareres.

c) Tag stikket ud af stikkontakten, og/eller fjern

batteriet, før du foretager indstillinger på

værktøjet eller tilbehørsdelene eller lægger

værktøjet fra dig. Disse forholdsregler forhin-

drer, at elværktøjet starter ved en fejl.

d) Opbevar elværktøj uden for børns rækkevid-

de, når værktøjet ikke anvendes. Personer,

som ikke kender produktet, eller som ikke har

læst disse anvisninger, må ikke bruge produk-

tet. Elværktøj er farligt, hvis det anvendes af uer-

farne personer.

e) Vedligehold elværktøjet omhyggeligt.

Kontrollér, om bevægelige dele fungerer, som

de skal og ikke sætter sig fast, om dele er

defekte eller så beskadigede, at elværktøjets

funktion er påvirket. Få beskadigede dele

repareret, inden du bruger produktet. Mange

uheld skyldes dårligt vedligeholdt elværktøj.

f) Hold skærende værktøjer skarpe og rene. Om-

hyggeligt vedligeholdt værktøj med skarpe skær

sætter sig ikke så ofte fast og er lettere at styre.

g) Brug elværktøj, tilbehør, udskiftelige dele osv.

iht. disse anvisninger. Tag hensyn til arbejds-

betingelserne og det arbejde, der skal udføres.

Anvendelse af elværktøj til andet end de til-

tænkte anvendelsesområder kan føre til farlige

situationer.

La page charge ...

Parkside PSTDA 20-Li A1 Original Instructions Manual

Ce manuel convient également à

Parkside PSTDA 20-Li A1 Original Instructions Manual

dans d''autres langues

Documents connexes

Autres documents