Silver Cross Wayfarer Pushchair & Carrycot Manuel utilisateur

Wayfarer Pushchair

& Carrycot

IMPORTANT: KEEP THESE INSTRUCTIONS

FOR FUTURE REFERENCE

2

These instructions are important.

Read these instructions before use and keep

them for future reference. Your child’s safety

may be affected if you do not follow these

instructions.

Your Wayfarer Pushchair is a high quality

Silver Cross product. It meets current British

and European safety standards and care and

regular light maintenance will ensure long

service.

This pushchair is suitable from birth up to 9kg

with the Carrycot and from 6 months up to 25

kg using the Seat Unit.

If somebody unfamiliar is using your Wayfarer

Pushchair always ensure that they read these

instructions carefully so that they understand

how the product works best.

The Wayfarer Pushchair is designed and

tested to be used with the Simplicity Car Seat

and the Wayfarer Carrycot.

Always read all the instructions provided

carefully and remember, the safety of your

child is your responsibility.

WARNING: Never leave your child

unattended.

Contents

First check all your parts have been supplied.

Your Wayfarer pushchair includes:

1.1 Seat unit with harness

1.2 Bumper bar

1.3 Chassis

1.4 Front Wheels

1.5 Rain Cover

1.6 Simplicity Car Seat Adaptors

1.7 Cup Holder

1.8 Carrycot outer

1.9 Carrycot liner

1.10 Carrycot mattress

1.1 1.2

1.3

1.4

1.7

1.8

1.9

1.6

1.5

1.10

3

silvercrossbaby.com

Preparation for use

Remove all packaging material from your

Wayfarer pushchair. To use your Wayfarer

pushchair from birth you must use the

Wayfarer Carrycot (included)

WARNING: Check that the

carrycot or seat unit or car seat

attachment devices are correctly

engaged before use.

Wayfarer chassis

2.1 Attach the front wheels by inserting the

axles into the Wayfarer frame until they

‘click’ into position.

2.2 Release the folding lock and lift the

handle upwards.

2.1

2.2

4

Wayfarer chassis

2.3 Continue to lift the handle upwards until

the frame ‘clicks’ and locks into position.

Always check that the frame is secure.

2.4 Apply the brake (see 22.1) and adjust

the handle height by pushing the

adjustment button in. Slide the handle

up or down and release the adjustment

button. The handle will ‘click’ and lock

into position (see 24.1).

Your Wayfarer chassis is now ready for

use.

2.4

2.3

5

silvercrossbaby.com

Using your Wayfarer from birth with

the carrycot

Preparation for use

Remove all packaging material from your

Wayfarer carrycot.

3.1 First erect the carrycot outer. Lay the

carrycot outer down with the frame

upper most. Press the 2x metal bars into

the locators on internal base of carrycot.

A small groove in the locator holds the

frame in position.

3.2 Attach the carrycot liner to the carrycot

outer. Fasten each inner zip. There is

one at each end of the liner.

3.3 Pass the two D-shaped parts of the liner

between the liner and the outer and

fasten the Velcro patches to secure the

liner in place.

3.4 Place the mattress into the base of

the liner.

WARNING: Do not leave your

child unattended.

WARNING: Never use the

carrycot on a stand.

WARNING: Do not let other

children play unattended near the

carrycot.

3.1

3.2

3.3

3.4

6

Using your Wayfarer from birth with

the carrycot

3.5 Attach the hood by pressing the hood

clips onto the slots on either side of the

carrycot frame. Slide the back of the

Wayfarer hood over the rear edge of the

carrycot.

3.6 To ﬁt the apron, unzip the lower edge of

the apron and keep it in a safe place. Zip

the apron onto the carrycot outer.

3.5

3.6

7

silvercrossbaby.com

Using your Wayfarer from birth with

the carrycot

3.7 Slide the apron ﬂap clips over the

attachment points inside the carrycot

frame.

3.8 Attach the bumper bar by pressing

the ends of the bumper bar into the

attachment points of the carrycot frame.

Wait to hear them ‘click’ into place.

Lift gently to ensure the bumper bar is

locked in place. Fold the apron ﬂap over

the bumper bar to hold it in place.

WARNING: The bumper bar

must be securely connected

at all times when in use. The

safety of your child is your

responsibility.

Your Wayfarer carrycot is ready to use.

3.7

3.8

8

Attaching the carrycot to your

chassis

4.1 To attach your Wayfarer carrycot to the

Wayfarer chassis hold the carrycot above

the chassis. Locate the carrycot chassis

connector posts into the attachment slots

on the chassis. Ensure that the carrycot

‘clicks’ into place. The carrycot should be

ﬁtted rearward facing. Lift the carrycot

gently by the bumper bar to check the

seat unit has locked into place.

WARNING: Do not add a

mattress other than the one

provided.

WARNING: Never use this

carry cot on a stand.

Detaching the carrycot from your

chassis

5.1 With the Wayfarer carrycot facing you, pull

both carrycot release handles outwards

and lift the carrycot clear of the chassis.

WARNING: Always ensure your

bumper bar is attached when your

child is in the carrycot.

WARNING: This product is suitable

for a child who cannot sit up by

itself, roll over and can not push its

self up on its hands and knees. Max

weight of child: 9kg.

WARNING: Do not let other

children play unattended near the

carrycot.

WARNING: Do not use if any part

is broken, torn, or missing.

CAUTION: Only use replacement

parts supplied and approved by the

manufacturer.

4.1

5.1

9

silvercrossbaby.com

Using your bumper bar

6.1 To attach, simply press both ends of the

bumper bar into the connector points

on the carrycot. Wait for it to ‘click’ in

place.

6.2 To detach, press the bumper bar release

button on the carrycot frame with one

hand and pull the bumper bar away

from the connector point with the other

hand. The bumper bar will rotate.

To detach both sides repeat point (6.2)

above. With one side of the bumper

bar removed the carrycot is easily

accessible.

WARNING: The bumper bar

must be securely connected

at all times when in use. The

safety of your child is your

responsibility.

6.1

6.2

10

Using your hood

7.1 Attach the hood by pressing the hood

clips onto the slots on either side of the

carrycot frame. Slide the back of the

Wayfarer hood over the rear edge of

the carrycot. Your Wayfarer hood can be

attached in 2 positions.

7. 2 Your Wayfarer hood can be used in 3

positions. Fully open, semi-open and

fully covered.

7.1

7. 2

11

silvercrossbaby.com

Using your apron

8.1 To attach the apron, unzip the lower

edge of the apron and keep it in a safe

place. Zip the apron onto the carrycot

outer.

8.2 Slide the apron ﬂap clips over the

attachment points inside the carrycot

frame.

8.1

8.2

12

9.1

10.1

Using your liner and mattress

9.1 The Wayfarer carrycot has a removable

liner. Simply unzip each end and release

the velcro fastenings to remove it.

Your Wayfarer Carrycot mattress is

removable. Simply lift it out of the

liner. The mattress cover can be hand

washed. Remove the foam mattress

insert prior to washing by opening the

ﬂap on the back of the mattress cover

and removing the foam mattress.

The Wayfarer Carrycot has a removable

liner. Simply unzip each end and release

the Velcro fastenings to remove it.

To ﬁt the liner and mattress see

preparation for use (3.2 and 3.3)

Using your raincover

10.1 Your Wayfarer raincover should be used

when the Wayfarer hood is attached to

the carrycot. First slide over the hood

and down towards the foot of the

carrycot.

Velcro fastenings secure the sides

around the chassis.

A zip gives easy access to your child.

13

silvercrossbaby.com

Using your Wayfarer as a pushchair

11.1 Your Wayfarer seat unit can be ﬁtted to

the chassis in rearward facing position

(infant facing you) or forward facing

position (infant facing away from you).

Follow (13.1) to attach the seat unit to

the chassis.

Adjust the seat unit to the desired

position (see 20.1) Secure the apron (see

17.1 ).

Your Wayfarer pushchair is ready to use.

Preparing the seat unit

12.1 First, slide the back of the hood over the

back of the seat unit. Locate the slot in

the fabric at the back of the hood and

slide over the seat recline adjustment

lever.

11.1

12.1

14

Preparing the seat unit

12.2 Attach the hood by pressing the hood

clips onto the slots on either side of the

seat unit frame. Velcro the lower front

corners of the hood onto the seat unit.

12.3 Simply thread the harness through the

button holes in the seat unit relative to

the size of your child, and secure the

harness buckle. (see 15.1).

12.1

12.2

15

silvercrossbaby.com

Preparing the seat unit

12.3 Fit the bumper bar to the seat unit by

placing the metal ends of the bumper

bar into the ﬁxing points on the seat

unit. Wait to hear the bumper bar ‘click’

into place.

WARNING: Always ensure

your bumper bar is attached

when your child is in the seat

unit.

12.4 Slide the apron ﬂap clips onto the

attachment points on the inside of the

seat frame. Fold the apron ﬂap over the

bumper bar to enclose and secure your

child. To secure, release and adjust the

harness (see 15.1)

12.3

12.4

16

Attaching the seat unit to your

chassis

WARNING: Ensure all locking

devices are engaged before use.

13.1 To attach your Wayfarer seat unit to

the Wayfarer chassis hold the seat unit

above the chassis. Locate the seat unit

chassis connector posts into the seat

attachment slots on the chassis. Ensure

that the seat unit ‘clicks’ into place.

The seat unit can be ﬁtted forward or

rearward facing. Lift the seat unit gently

by the bumper bar to check the seat unit

has locked into place.

To adjust the seat position (see 20.1)

Detaching the seat unit from your

chassis

14.1 With the seat unit facing you, pull both

seat release handles outwards and lift

the seat unit clear of the chassis.

WARNING: Always ensure your

bumper bar is attached when

your child is in the seat unit.

NOTE: Remove the child from the seat

unit before detaching from your chassis.

13.1

14.1

17

silvercrossbaby.com

15.4

Using the harness

WARNING: Always use the crotch

strap in combination with the

waist and shoulder straps

15.1 To fasten the harness insert both buckle

clips into each side of the buckle. Listen

for the ‘click’.

WARNING: Always use the

restraint system.

15.2 To release the harness press the button

at the centre of the buckle and pull

apart. The shoulder straps can be

unhooked from the buckle if required.

15.3 Your harness is fully adjustable by

moving the slides (A), to make ﬁtting

easy. Your child should always be

harnessed in and should never be left

unattended, even for short periods of

time.

Your Wayfarer harness can be adjusted

for the size of your child.

15.4 The shoulder straps have 3 height

positions. To adjust, ﬁrst lift the ﬂap on

the back of the seat unit. Thread the

harness buckle from the front of the seat

unit through to the back of the seat unit

and allow the buckle to lay ﬂat behind

the seat securing the shoulder strap in

place.

A

BB

A

15.1

15.2

15.3

18

Using your hood

16.1 Attach the hood by pressing the hood

clips onto the slots on either side of the

seat frame. (There are 2 different height

slots for the hood clips). Slide the back

of the Wayfarer hood over the rear edge

of the seat unit.

16.2 Your Wayfarer hood can be used in 3

positions. Fully open, semi-open and

fully covered.

16.1

16.2

19

silvercrossbaby.com

Using your apron

17.1 Slide the apron ﬂap clips onto the

attachment points on the inside of the

seat frame. Fold the apron ﬂap over the

bumper bar to enclose and secure your

child.

Using your raincover

18.1 Your Wayfarer raincover should be used

when the Wayfarer hood is attached

to the seat unit. First slide over the

hood and down towards the toe of the

seat unit. Velcro fastening secures the

raincover under the foot of the seat unit.

A zip gives easy access to your child.

17.1

18.1

20

Using your bumper bar

Your Wayfarer seat unit has a bumper bar that

can be fully or partly removed

WARNING: Always ensure your

bumper bar is attached when

your child is in the seat unit.

19.1 Fit the bumper bar to the seat unit by

placing the metal ends of the bumper

bar into the ﬁxing points on the seat

unit. Wait to hear the bumper bar ‘click’

into place.

19.2 To detach, press the bumper bar release

button on the seat unit with one hand

and pull the bumper bar away from

the ﬁxing point with the other hand.

The bumper bar will rotate allowing

easy access to your child, if the bumper

needs to be fully removed then repeat

on the opposite side.

WARNING: Always remove

your child from the seat before

attempting to lift and remove the

seat unit.

19.1

19.2

La page charge ...

Silver Cross Wayfarer Pushchair & Carrycot Manuel utilisateur

Silver Cross Wayfarer Pushchair & Carrycot Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents