Pioneer DMH-A340DAB Guide de démarrage rapide

Taper
Guide de démarrage rapide
English Français Italiano Español Deutsch Nederlands
DMH-A340DAB
DMH-A240DAB
RDS AV RECEIVER
AUTORADIO MULTIMÉDIA
SINTOLETTORE AV CON RDS
RECEPTOR AV CON RDS
RDS-AV-RECEIVER
RDS AV-ONTVANGER
Quick start guide
Guide de démarrage rapide
Guida rapida all’uso
Guía de iniciación rápida
Schnellstartanleitung
Snelstartgids
AVH-A240DAB
AVH-A240BT
DVD RDS AV RECEIVER
AUTORADIO MULTIMÉDIA DVD
SINTOLETTORE DVD RDS CON AV
RECEPTOR AV RDS CON DVD
DVD-RDS-AV-EMPFÄNGER
DVD RDS AV-ONTVANGER
English
This guide is intended to guide you through the basic functions of this unit.
For details, please refer to the Operation manual stored on the website.
https://www.pioneer-car.eu/uk/
F
rançais
Ce guide a pour but de vous présenter les fonctions de base de cet appareil.
Pour les détails, veuillez vous reporter au mode d’emploi qui se trouve sur le site Web.
https://www.pioneer-car.eu/fr/fr
Italiano
Questa guida illustra le funzioni principali dell’apparecchio.
Per dettagli, fare riferimento al Manuale d’uso presente sul sito web.
https://www.pioneer-car.eu/it/it
Español
Se ha diseñado esta guía con la intención de guiarle a través de las funciones básicas de esta
unidad.
Para los detalles, consulte el Manual de instrucciones que se encuentra almacenado en el
sitio web.
https://www.pioneer-car.eu/es/es
Deutsch
Diese Anleitung führt Sie durch die grundlegenden Funktionen dieses Geräts.
Einzelheiten nden Sie in der Bedienungsanleitung, die auf der Website.
https://www.pioneer-car.eu/de/de
Nederlands
Deze gids is bedoeld om u bekend te maken met de basisfuncties van dit toestel.
Raadpleegt u voor details de handleiding op onze website.
https://www.pioneer-car.eu/nl/nl
2En
Declaration of Conformity with regard to the Radio Equipment Directive 2014/53/EU
[*] DMH-A340DAB, DMH-A240DAB, AVH-A240DAB, AVH-A240BT
English:
Hereby, Pioneer declares that the radio equipment type
[*] is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is
available at the following internet address: http://
www.pioneer-car.eu/compliance
Suomi:
Pioneer vakuuttaa, että radiolaitetyyppi [*] on direktiivin
2014/53/EU mukainen.
EU-vaatimustenmukaisuusvakuutuksen täysimittainen
teksti on saatavilla seuraavassa internetosoitteessa:
http://www.pioneer-car.eu/compliance
Nederlands:
Hierbij verklaar ik, Pioneer, dat het type radioapparatuur
[*] conform is met Richtlijn 2014/53/EU.
De volledige tekst van de EU-conformiteitsverklaring
kan worden geraadpleegd op het volgende
internetadres: http://www.pioneer-car.eu/compliance
Français:
Le soussigné, Pioneer, déclare que l’équipement
radioélectrique du type [*] est conforme à la directive
2014/53/UE.
Le texte complet de la déclaration UE de conformité est
disponible à l’adresse internet suivante: http://
www.pioneer-car.eu/compliance
Svenska:
Härmed försäkrar Pioneer att denna typ av
radioutrustning [*] överensstämmer med direktiv 2014/
53/EU.
Den fullständiga texten till EU-försäkran om
överensstämmelse finns på följande webbadress: http://
www.pioneer-car.eu/compliance
Dansk:
Hermed erklærer Pioneer, at radioudstyrstypen [*] er i
overensstemmelse med direktiv 2014/53/EU.
EU-overensstemmelseserklæringens fulde tekst kan
findes på følgende internetadresse: http://
www.pioneer-car.eu/compliance
Deutsch:
Hiermit erklärt Pioneer, dass der Funkanlagentyp [*] der
Richtlinie 2014/53/EU entspricht.
Der vollständige Text der EU-Konformitätserklärung ist
unter der folgenden Internetadresse verfügbar: http://
www.pioneer-car.eu/compliance
Ελληνικά:
Με την παρούσα ο/η Pioneer, δηλώνει ότι ο
ραδιοεξοπλισμός [*] πληροί την οδηγία 2014/53/ΕΕ.
Το πλήρες κείμενο της δήλωσης συμμόρφωσης ΕΕ
διατίθεται στην ακόλουθη ιστοσελίδα στο διαδίκτυο:
http://www.pioneer-car.eu/compliance
Italiano:
Il fabbricante, Pioneer, dichiara che il tipo di
apparecchiatura radio [*] è conforme alla direttiva 2014/
53/UE.
Il testo completo della dichiarazione di conformità UE è
disponibile al seguente indirizzo Internet: http://
www.pioneer-car.eu/compliance
Español:
Por la presente, Pioneer declara que el tipo de equipo
radioeléctrico [*] es conforme con la Directiva 2014/53/
UE.
El texto completo de la declaración UE de conformidad
está disponible en la dirección Internet siguiente: http://
www.pioneer-car.eu/compliance
Português:
O(a) abaixo assinado(a) Pioneer declara que o presente
tipo de equipamento de rádio [*] está em conformidade
com a Diretiva 2014/53/UE.
O texto integral da declaração de conformidade está
disponível no seguinte endereço de Internet: http://
www.pioneer-car.eu/compliance
Čeština:
Tímto Pioneer prohlašuje, že typ rádiového zařízení [*] je
v souladu se směrnicí 2014/53/EU.
Úplné znění EU prohlášení o shodě je k dispozici na této
internetové adrese: http://www.pioneer-car.eu/
compliance
Eesti:
Käesolevaga deklareerib Pioneer, et käesolev
raadioseadme tüüp [*] vastab direktiivi 2014/53/EL
nõuetele.
ELi vastavusdeklaratsiooni täielik tekst on kättesaadav
järgmisel internetiaadressil: http://www.pioneer-car.eu/
compliance
Magyar:
Pioneer igazolja, hogy a [*] típusú rádióberendezés
megfelel a 2014/53/EU irányelvnek.
Az EU-megfelelőségi nyilatkozat teljes szövege elérhető
a következő internetes címen: http://www.pioneer-
car.eu/compliance
Latviešu valoda:
Ar šo Pioneer deklarē, ka radioiekārta [*] atbilst
Direktīvai 2014/53/ES.
Pilns ES atbilstības deklarācijas teksts ir pieejams šādā
interneta vietnē: http://www.pioneer-car.eu/compliance
Lietuvių kalba:
Aš, Pioneer, patvirtinu, kad radijo įrenginių tipas [*]
atitinka Direktyvą 2014/53/ES.
Visas ES atitikties deklaracijos tekstas prieinamas šiuo
interneto adresu: http://www.pioneer-car.eu/
compliance
Manufacturer:
Pioneer Corporation
28-8, Honkomagome 2-chome, Bunkyo-ku,
Tokyo 113-0021, Japan
EU Authorised Representative’s & Importer:
Pioneer Europe NV
Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium/Belgique
http://www.pioneer-car.eu
Malti:
B’dan, Pioneer, niddikjara li dan it-tip ta’ tagħmir tar-
radju [*] huwa konformi mad-Direttiva 2014/53/UE.
It-test kollu tad-dikjarazzjoni ta’ konformità tal-UE huwa
disponibbli fdan l-indirizz tal-Internet li ġej: http://
www.pioneer-car.eu/compliance
Slovenčina:
Pioneer týmto vyhlasuje, že rádiové zariadenie typu [*]
je v súlade so smernicou 2014/53/EÚ.
Úplné EÚ vyhlásenie o zhode je k dispozícii na tejto
internetovej adrese: http://www.pioneer-car.eu/
compliance
Slovenščina:
Pioneer potrjuje, da je tip radijske opreme [*] skladen z
Direktivo 2014/53/EU.
Celotno besedilo izjave EU o skladnosti je na voljo na
naslednjem spletnem naslovu: http://www.pioneer-
car.eu/compliance
Română:
Prin prezenta, Pioneer declară că tipul de echipamente
radio [*] este în conformitate cu Directiva 2014/53/UE.
Textul integral al declarației UE de conformitate este
disponibil la următoarea adresă internet: http://
www.pioneer-car.eu/compliance
български:
С настоящото Pioneer декларира, че този тип
радиосъоръжение [*] е в съответствие с Директива
2014/53/ЕС.
Цялостният текст на ЕС декларацията за
съответствие може да се намери на следния
интернет адрес: http://www.pioneer-car.eu/
compliance
Polski:
Pioneer niniejszym oświadcza, że typ urządzenia
radiowego [*] jest zgodny z dyrektywą 2014/53/UE.
Pełny tekst deklaracji zgodności UE jest dostępny pod
następującym adresem internetowym: http://
www.pioneer-car.eu/compliance
Norsk:
Herved Pioneer erklærer at radioutstyr type [*] er i
samsvar med direktiv 2014/53/EU.
Den fullstendige teksten i EU-samsvarserklæringen er
tilgjengelig på følgende internettadresse: http://
www.pioneer-car.eu/compliance
Íslenska:
Hér með Pioneer lýsir yfir að tegund þráðlausan búnað
[*] er í samræmi við tilskipun 2014/53/ESB.
The fullur texti af ESB-samræmisyfirlýsingu er í boði á
eftirfarandi veffangi: http://www.pioneer-car.eu/
compliance
Hrvatski:
Pioneer ovime izjavljuje da je radijska oprema tipa [*] u
skladu s Direktivom 2014/53/EU.
Cjeloviti tekst EU izjave o sukladnosti dostupan je na
sljedećoj internetskoj adresi: http://www.pioneer-
car.eu/compliance
Türk:
Burada. Pioneer radyo ekipmani turunun [*] 2014/53/EU
direktiflerine uyumlu oldugunu beyan eder.
Avrupa uyumluluk beyaninin tam metni belirtilen
internet sitesinde mevcuttur: http://www.pioneer-
car.eu/compliance
[Bluetooth® specications]
Output power: +4 dBm Maximum. (Power class 2)
Frequency band(s): 2 402.0 MHz to 2 480.0 MHz
3En
English
Declaration of Conformity with regard to the Radio Equipment Regulations 2017
[*] DMH-A340DAB, DMH-A240DAB, AVH-A240DAB, AVH-A240BT
Hereby, Pioneer declares that the radio equipment type [*] is in compliance with UK SI 2017 No. 1206. The full text of the UK
declaration of conformity is available at the following internet address:
http://www.pioneer-car.eu/compliance
Manufacturer:
Pioneer Corporation
28-8, Honkomagome 2-chome, Bunkyo-ku,
Tokyo 113-0021, Japan
UK Authorised Representative’s & Importer:
Pioneer Europe NV
Salamanca, Wellington Street, Slough, SL1 1YP, UK
http://www.pioneer-car.eu
Private households in the member states of the EU, in Switzerland and Norway may return their used
electronic products free of charge to designated collection facilities or to a retailer (if you purchase a
similar new one).
For countries not mentioned above, please contact your local authorities for the correct method of
disposal.
By doing so you will ensure that your disposed product undergoes the necessary treatment, recovery
and recycling and thus prevent potential negative effects on the environment and human health.
WARNING
Slots and openings in the cabinet are provided for ventilation to ensure reliable operation of the
product, and to protect it from overheating. To prevent fire hazard, the openings should never be
blocked or covered with items (such as papers, floor mat, cloths).
CAUTION
This product is evaluated in moderate and tropical climate condition under the Audio, video and
similar electronic apparatus - Safety requirements, IEC 60065.
WARNING
LIGHT GREEN LEAD AT POWER CONNECTOR IS DESIGNED TO DETECT PARKED STATUS AND
MUST BE CONNECTED TO THE POWER SUPPLY SIDE OF THE HANDBRAKE SWITCH. IMPROPER
CONNECTION OR USE OF THIS LEAD MAY VIOLATE APPLICABLE LAW AND MAY RESULT IN
SERIOUS INJURY OR DAMAGE.
Precaution
If you want to dispose this product, do not mix it with general household waste. There is a separate
collection system for used electronic products in accordance with legislation that requires proper
treatment, recovery and recycling.
CAUTION
This product is a Class 1 laser product classified under the safety standard, IEC 60825-1:2014.
CLASS 1 LASER PRODUCT
To ensure safe driving
4En
Do not take any steps to tamper with or disable the handbrake interlock system which is in
place for your protection. Tampering with or disabling the handbrake interlock system could
result in serious injury or death.
To avoid the risk of damage and injury and the potential violation of applicable laws, this
product is not for use with a video image that is visible to the driver.
In some countries the viewing of video image on a display inside a vehicle even by persons other
than the driver may be illegal. Where such regulations apply, they must be obeyed.
If you attempt to watch video image while driving, the warning “Viewing of front seat
video source while driving is strictly prohibited.” will appear on the screen. To watch
video image on this display, stop the vehicle in a safe place and apply the handbrake.
Please keep the brake pedal pushed down before releasing the handbrake.
This manual uses diagrams of actual screens to describe operations. However, the
screens on some units may not match those shown in this manual depending on the
model used.
About this manual
DMH-A340DAB
DMH-A240DAB
Getting started
Whats What
Touch Touch and hold
Swipe
5En
English
AVH-A240DAB/AVH-A240BT
Press to display off
Press and hold to power off
Press to display the top menu screen
Press and hold to mute or unmute
VOL (+/-)
USB port
Disc eject
Disc loading slot
1 Press .
2 [Date & Time].
Adjusting the date and time
Adjust the date and time
6En
Selecting the source
Select a source
Display hidden sources
Tuner operation
Store the strongest broadcast frequencies
Select a band
Tune into the next station
Recall the preset channel stored to a key from memory
Store the current broadcast frequency to a key
Switch to display or hide the radio station name
Switch to receive only the radio stations (short range/long
range) with sufficiently strong signals
Start seek turning
7En
English
AVH-A240DAB/AVH-A240BT
Moving images operation
Pause and start playback
Change the playback point
Select the previous file or the next file
Fast forwards or fast reverse (only for USB)
Display the menu
Fast forwards or fast reverse
Start the search function
Audio operation
Pause and start playback
Select the previous file or the next file
Fast forwards or fast reverse
Set the function for playing audio
8En
List search operation
Display the playlist screen
Select the media file types
Select a list title or folder that you want to play
Scroll the list
1 Press .
2 [Phone].
3 Select the unit name shown in the mobile device display.
4 Perform the pairing operation by the mobile device and this unit.
NOTE
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any
use of such marks by Pioneer Corporation is under license. Other trademarks and trade names are
those of their respective owners.
Bluetooth® connection
Bluetooth telephone operation
Enter the phone number directly
Switch to the phone book mode
Switch to the call history list
Make an outgoing call
9En
English
Do not operate this product, any
applications, or the rear view camera
option (if purchased) if doing so will
divert your attention in any way from the
safe operation of your vehicle. Always
observe safe driving rules and follow all
existing traffic regulations. If you
experience difficulty in operating this
product, pull over, park your vehicle in a
safe location and apply the handbrake
before making the necessary
adjustments.
Do not install this product where it may
(i) obstruct the driver’s vision,
(ii) impair the performance of any of the
vehicle’s operating systems of safety
features, including airbags, hazard lamp
buttons, or
(iii) impair the drivers ability to safely
operate the vehicle.
In some cases, it may not be possible to
install this product because of the vehicle
type or the shape of the vehicle interior.
Pioneer does not recommend that you
install this product yourself. This product is
designed for professional installation only.
We recommend that only authorised
Pioneer service personnel, who have
special training and experience in mobile
electronics, set up and install this product.
NEVER SERVICE THIS PRODUCT YOURSELF.
Installing or servicing this product and its
connecting cables may expose you to the
risk of electric shock or other hazards, and
can cause damage to this product that is
not covered by warranty.
Do not take any steps to tamper with or
disable the handbrake interlock system
which is in place for your protection.
Tampering with or disabling the
handbrake interlock system could result in
serious injury or death.
Secure all wiring with cable clamps or
electrical tape. Do not allow any bare
wiring to remain exposed.
Do not directly connect the yellow lead of
this product to the vehicle battery. If the
lead is directly connected to the battery,
engine vibration may eventually cause
the insulation to fail at the point where
the wire passes from the passenger
compartment into the engine
compartment. If the yellow leads
insulation tears as a result of contact with
metal parts, short-circuiting can occur,
resulting in considerable danger.
It is extremely dangerous to allow cables
to become wound around the steering
column or gearstick. Be sure to install this
product, its cables, and wiring away in
such so that they will not obstruct or
hinder driving.
Connection
Precautions
Your new product and this
manual
Important safeguards
Precautions before
connecting the system
Make sure that the cables and wires will
not interfere with or become caught in
any of the vehicle’s moving parts,
especially the steering wheel, gearstick,
handbrake, sliding seat tracks, doors, or
any of the vehicle’s controls.
Do not route wires where they will be
exposed to high temperatures. If the
insulation heats up, wires may become
damaged, resulting in a short circuit or
malfunction and permanent damage to
the product.
Do not shorten any leads. If you do, the
protection circuit (fuse holder, fuse
resistor or filter, etc.) may fail to work
properly.
Never feed power to other electronic
products by cutting the insulation of the
power supply lead of this product and
tapping into the lead. The current
capacity of the lead will be exceeded,
causing overheating.
Use this product with a 12-volt battery
and negative earthing only. Failure to do
so may result in a fire or malfunction.
To avoid shorts in the electrical system,
be sure to disconnect the (–) battery
cable before installation.
When speaker output is used by 4
channels , use speakers over 50 W
(Maximum input power) and between 4
Ω to 8 Ω (impedance value). Do not use 1
Ω to 3 Ω speakers for this unit.
The black lead is earth. Please earth this
lead separately from the earth of high
current products such as power amps. Do
not earth more than one product
together with the earth from another
product. For example, you must
separately earth any amp unit away from
the earth of this product. Connecting
earths together can cause a fire and/or
damage the products if their earths
became detached.
When replacing the fuse, be sure to only
use a fuse of the rating prescribed on this
product.
This product cannot be installed in a
vehicle without ACC (accessory) position
on the ignition switch.
To avoid short-circuiting, cover the
disconnected lead with insulating tape. It
is especially important to insulate all
unused speaker leads, which if left
uncovered may cause a short circuit.
For connecting a power amp or other
devices to this product, refer to the
manual for the product to be connected.
The graphical symbol placed on
the product means direct current.
When the ignition switch is turned on
(ACC ON), a control signal is output
through the blue/white lead. Connect to
an external power amp’s system remote
control terminal, the auto-aerial relay
control terminal, or the aerial booster
power control terminal (max. 300 mA 12
V DC). The control signal is output
Before installing this
product
To prevent damage
Notice for the blue/
white lead
ACC position
No ACC position
10En
through the blue/white lead, even if the
audio source is switched off.
Microphone 3 m
This product
Aerial jack
Digital Radio aerial input (DMH-
A340DAB, DMH-A240DAB, AVH-
A240DAB)
Wired remote input (SWC)
Hard-wired remote control adapter can
be connected (sold separately).
Pre out supply (REAR VIEW CAMERA
IN)
Fuse (10 A)
Power supply
To power supply
Depending on the kind of vehicle, the
function of 2* and 4* may be different.
In this case, be sure to connect 1* to 4*
and 3* to 2*.
Yellow (2*)
Back-up (or accessory)
Yellow (1*)
Connect to the constant 12 V supply
terminal.
Red (4*)
Accessory (or back-up)
This product
Power cord
Red (3*)
Connect to terminal controlled by
ignition switch (12 V DC).
Connect leads of the same colour to
each other.
Orange/white
To lighting switch terminal.
Black (earth)
To vehicle (metal) body.
Blue/white (5*)
The pin position of the ISO connector
will differ depending on the type of
vehicle. Connect 5* and 6* when Pin 5 is
an aerial control type. In another type of
vehicle, never connect 5* and 6*.
Blue/white (6*)
Connect to auto-aerial relay control
terminal (max. 300 mA 12 V DC).
Blue/white
Connect to system control terminal of
the power amp (max. 300 mA 12 V DC).
Violet/white
Of the two lead wires connected to the
back lamp, connect the one in which
the voltage changes when the gear shift
is in the REVERSE (R) position. This
connection enables the unit to sense
whether the car is moving forwards or
backwards.
Yellow/black
If you use an equipment with Mute
function, wire this lead to the Audio
Mute lead on that equipment. If not,
keep the Audio Mute lead free of any
connections.
Light green
Used to detect the ON/OFF status of the
handbrake. This lead must be
connected to the power supply side of
the handbrake switch.
Connection method
Clamp the lead (1) then clamp firmly
with needle-nosed pliers (2).
Power supply side
Handbrake switch
Earth side
Speaker leads
White: Front left + or high range left +
White/black: Front left – or high range
left –
Grey: Front right + or high range right +
Grey/black: Front right – or high range
right –
Green: Rear left + or middle range left +
Green/black: Rear left – or middle range
left –
Violet: Rear right + or middle range
right +
Violet/black: Rear right – or middle
range right –
ISO connector
In some vehicles, the ISO connector
may be divided into two. In this case, be
sure to connect to both connectors.
The position of the handbrake switch
depends on the vehicle model. For details,
consult the vehicle Owners Manual or
dealer.
11En
English
Important
The speaker leads are not used when this connection is in use.
Subwoofer output (SUBWOOFER OUTPUT)
RCA conversion cable (sold separately)
RCA cable (sold separately)
Power amp
Front output (FRONT OUTPUT)
Rear output (REAR OUTPUT)
Pre out cord
To pre out supply
System remote control
Connect to Blue/white cable (max. 300 mA 12 V DC).
Rear speaker
Front speaker
Subwoofer
Power amp (sold separately)
For details on how to connect an external
device using a separately sold cable, refer
to the manual for the cable.
For details concerning the connection
and operations of iPhone or smartphone,
refer to the Operation Manual.
DMH-A340DAB
DMH-A240DAB/AVH-A240DAB/AVH-
A240BT
USB port
USB cable 1.5 m
USB interface cable for iPhone (sold
separately)
iPhone with Lightning connector
DMH-A340DAB
DMH-A240DAB/AVH-A240DAB/AVH-
A240BT
USB port
USB cable 1.5 m
USB - micro USB cable (Type USB A -
micro USB B) (sold separately)
USB Type-C cable (Type USB A - USB C)
(sold separately)
Smartphone
The length of Type USB A - micro USB B
cable cannot exceed 2 m and Type USB A
iPhone and
smartphone
iPhone with Lightning
connector
Connecting via the USB port
Smartphone (Android™
device)
Connecting via the USB port
12En
- USB C cannot exceed 4 m according to
the USB cable standard. When using a
cable other than the above conditions,
the main unit function may not operate
properly.
Android is a trademark of Google LLC.
About rear view camera
When you use the rear view camera, the
rear view image is automatically switched
from the video by moving the gearstick to
REVERSE (R). Camera View mode also
allows you to check what is behind you
while driving.
USE INPUT ONLY FOR REVERSE OR MIRROR
IMAGE REAR VIEW CAMERA. OTHER USE
MAY RESULT IN INJURY OR DAMAGE.
The screen image may appear reversed.
With the rear view camera you can keep
an eye on trailers, or back into a tight
parking spot. Do not use for
entertainment purposes.
Objects in rear view may appear closer or
more distant than in reality.
The image area of full-screen images
displayed while backing or checking the
rear of the vehicle may differ slightly.
This product
Pre out supply
Power supply
To pre out supply
To power supply
Power cord
Brown (REAR VIEW CAMERA IN)
Violet/white (REVERSE-GEAR SIGNAL
INPUT)
Refer to Power cord on page 10.
RCA cable (sold separately)
To video output
Rear view camera (sold separately)
Connect only the rear view camera to
REAR VIEW CAMERA IN. Do not connect
any other equipment.
When the camera image is not displayed
on screen, check the camera setting in
the setting menu. For details, refer to the
Operation Manual.
Camera
This product
Pre out supply
AUX input
Mini-jack AV cable (sold separately)
To pre out supply
Pre out cord
Yellow
Red, white
Yellow (REAR MONITOR OUT)
RCA cables (sold separately)
To video output
To audio outputs
External video component (sold
separately)
To video input
Rear display with RCA input jack
NEVER install the rear display in a
location that enables the driver to watch
the video source while driving.
This product’s rear video output is for
connection of a display to enable
passengers in the rear seats to watch the
video source.
Be sure to use a mini-jack AV cable (sold
separately) for wiring. If you use other
cables, the wiring position might differ
resulting in disturbed images and sounds.
External video component
and the display
L : Left audio (White)
R : Right audio (Red)
V : Video (Yellow)
G : Earth
13En
English
Never install this product in places where,
or in a manner that:
Could injure the driver or passengers if
the vehicle stops suddenly.
– May interfere with the driver’s operation
of the vehicle, such as on the floor in
front of the driver’s seat, or close to the
steering wheel or gearstick.
To ensure proper installation, be sure to
use the supplied parts in the manner
specified. If any parts are not supplied
with this product, use compatible parts in
the manner specified after you have the
part compatibility checked by your
dealer. If parts other than supplied or
compatible ones are used, they may
damage internal parts of this product or
they may work loose and the product
may become detached.
Do not install this product where it may
(i) obstruct the driver’s vision, (ii) impair
the performance of any of the vehicle’s
operating systems or safety features,
including airbags, hazard lamp buttons
or (iii) impair the driver’s ability to safely
operate the vehicle.
Never install this product in front of or
next to the place in the dashboard, door,
or pillar from which one of your vehicle’s
airbags would deploy. Please refer to your
vehicle’s owners manual for reference to
the deployment area of the frontal
airbags.
Consult with your nearest dealer if
installation requires drilling holes or
other modifications of the vehicle.
Before making a final installation of this
product, temporarily connect the wiring
to confirm that the connections are
correct and the system works properly.
Do not install this product in places
subject to high temperatures or
humidity, such as:
Places close to a heater, vent or air
conditioner.
Places exposed to direct sunlight, such
as on top of the dashboard.
Places that may be exposed to rain,
such as close to the door or on the
vehicle’s floor.
Install this product horizontally on a
surface within 0 to 30 degrees tolerance
(AVH) or 0 to 60 degrees tolerance (DMH).
When installing, to ensure proper heat
dispersal when using this unit, make sure
you leave ample space behind the rear
panel and wrap any loose cables so they
are not blocking the vents.
Installation
Precautions before
installation
Before installing
Installation notes
1 Remove transport screws. (AVH-
A240DAB/AVH-A240BT)
Remove these two transport screws before
installation. Otherwise, the disc player will
not work.
Transport screw
2 Insert the supplied extraction keys
into both sides of the unit until they
click into place.
3 Pull the unit out of the holder.
Extraction key
1 Install the holder into the dashboard.
2 Secure the mounting sleeve by using a
screwdriver to bend the metal tabs
(90°) into place.
Dashboard
Holder
3 Install this product into the holder.
Dashboard
4 Attach the trim ring.
Trim ring
Before installing this
product
Leave ample
space
5 cm
5 cm
Installation with the
holder
112 mm
182 mm
14En
Groove
Attach the trim ring with the side
with a groove facing downward.
1 Fastening this product to the factory
radio-mounting bracket.
Position this product so that its screw
holes are aligned with the screw holes
of the bracket, and tighten the screws at
three locations on each side.
Factory radio-mounting bracket
If the pawl interferes with
installation, you may bend it down
out of the way.
Dashboard or console
Flush surface screw
Be sure to use the screws supplied
with this product.
Install the microphone in a place where
its direction and distance from the driver
make it easiest to pick up the drivers
voice.
Be sure to turn off (ACC OFF) the product
before connecting the microphone.
Depending on the vehicle model, the
microphone cable length may be too
short when you mount the microphone
on the sun visor. In such cases, install the
microphone on the steering column.
1 Fit the microphone lead into the
groove.
Microphone lead
Groove
2 Attach the microphone clip to the sun
visor.
Installation using the screw
holes on the side of this
product
Installing the
microphone
Mounting on the sun
visor
Microphone clip
Clamps
Use separately sold clamps to secure
the lead where necessary inside the
vehicle.
Install the microphone on the sun visor
when it is in the up position. It cannot
recognise the drivers voice if the sun
visor is in the down position.
1 Detach the microphone base from the
microphone clip by sliding the
microphone base while pressing the
tab.
Tab
Microphone base
2 Mount the microphone on the
steering column.
Double-sided tape
Clamps
Use separately sold clamps to secure
the lead where necessary inside the
vehicle.
Install the microphone on the steering
column, keeping it away from the steering
wheel.
The microphone angle can be adjusted.
Installation on the
steering column
Adjusting the microphone
angle
15En
English
2Fr
Les particuliers résidant dans les états membres de l’UE, en Suisse et en Norvège peuvent retourner
gratuitement leurs produits électroniques usagés dans un centre de collecte désigné ou chez un
revendeur (en cas d’achat d’un nouvel appareil similaire).
Pour les pays non mentionnées ci-dessus, veuillez contacter les autorités locales pour connaître la
méthode adéquate de mise au rebut.
Ainsi, vous vous assurez que votre appareil mis au rebut suit le traitement, la récupération et le
recyclage nécessaires, empêchant ainsi les effets potentiellement négatifs sur l’environnement et la
santé humaine.
ATTENTION
Les fentes et les ouvertures du boîtier sont conçus pour la ventilation afin d’assurer le bon
fonctionnement du produit, et pour le protéger de toute surchauffe. Pour éviter tout risque d’incendie,
les ouvertures ne doivent jamais être bloquées ou recouvertes d’objets (tels que du papier, un tapis, des
vêtements).
PRÉCAUTION
Ce produit est évalué sous des conditions climatiques modérées et tropicales conformément à la
norme CEI 60065 sur les Appareils audio, vidéo et appareils électroniques analogues - Exigences de
sécurité.
Précautions
Pour la mise au rebut de ce produit, ne le mélangez pas avec les déchets domestiques habituels. Un
système de collecte spécifique pour les produits électroniques usagés existe conformément à la
législation en vigueur sur le traitement, la collecte et le recyclage.
ATTENTION
Le lecteur optique monté sur ce véhicule est classifié comme produit laser de classe 1 selon la norme
relative à la sécurité, CEI 60825-1:2014.
PRODUIT LASER DE CLASSE 1
ATTENTION
LE FIL VERT CLAIR SUR LE CONNECTEUR D’ALIMENTATION EST CONÇU POUR DÉTECTER L’ÉTAT
D’ARRÊT DU VÉHICULE ET DOIT ÊTRE RACCORDÉ AU CIRCUIT D’ALIMENTATION DU
CONTACTEUR DU FREIN DE STATIONNEMENT. TOUTE CONNEXION OU UTILISATION
INCORRECTE DE CE FIL RISQUE D’ENTRAÎNER LE NON-RESPECT DES LOIS EN VIGUEUR ET DE
PROVOQUER DES DOMMAGES CORPORELS ET MATÉRIELS GRAVES.
N’essayez pas de manipuler ou de désactiver le système de verrouillage du frein de
stationnement en place pour votre sécurité. Toute manipulation ou désactivation du système
de verrouillage du frein de stationnement risque d’entraîner des dommages corporels graves,
voire la mort.
Pour éviter les dommages matériels et corporels et respecter les lois en vigueur, le conducteur
ne doit pas utiliser ce produit lorsqu’il est tenté de regarder les vidéos à l’écran.
Dans certains pays, il peut être illégal pour le conducteur autant que pour les passagers de regarder
des vidéos sur un écran installé à lintérieur du véhicule. Dans ce cas, vous devez respecter les lois en
vigueur.
Si vous tentez de regarder une vidéo tout en conduisant, l’avertissement «Il est
strictement interdit de voir la source vidéo depuis le siège avant pendant la
conduite. » apparaît sur l’écran. Pour regarder une vidéo sur cet écran, garez votre
véhicule dans un endroit sûr et serrez le frein de stationnement. Appuyez sur la pédale
de frein avant de desserrer le frein de stationnement.
Pour illustrer les procédures décrites dans ce manuel, des images d’écrans réels sont
utilisées. Néanmoins, les écrans de certains produits peuvent être différents de ceux
présentés dans ce manuel selon le modèle utilisé.
Conseils pour une conduite sécuritaire
À propos de ce manuel
3Fr
Français
DMH-A340DAB
DMH-A240DAB
Mise en route
Description de l’appareil
Toucher Maintenir le doigt
Faire glisser
AVH-A240DAB/AVH-A240BT
Appuyez pour désactiver l’affichage
Maintenez la touche enfoncée pour mettre l’appareil hors
tension
Appuyez pour afficher l’écran du menu principal
Maintenez la touche enfoncée pour activer ou désactiver le
son
VOL (+/-)
Port USB
Éjection du disque
Fente de chargement des disques
4Fr
1 Appuyez sur .
2 [Date et heure].
Réglage de la date et de l’heure
Régler la date et l’heure
Sélection de la source
Sélectionner une source
Afficher les sources masquées
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84

Pioneer DMH-A340DAB Guide de démarrage rapide

Taper
Guide de démarrage rapide