Sony ICD-UX71F Manuel utilisateur

Taper
Manuel utilisateur
ICD-UX71/UX81/UX71F/UX81F/UX91F QSG GB/FR/ES/NL 4-114-026-11(1)
ICD-UX71/UX81/UX71F/UX81F/UX91F QSG GB/FR/ES/NL 4-114-026-11(1)
2
GB
This Quick Start Guide describes only basic operations,
such as how to record, play back, or erase messages.
The operating instructions explaining all the features
and functions are supplied with the IC recorder as PDF
les in 19 languages stored on the supplied CD-ROM.
You can copy the PDF les of the operating
instructions to your computer. Insert the supplied CD-
ROM into the CD-ROM drive of your computer, and
just follow the instructions shown on the screen.
If the instructions are not shown on the screen, right-
click the CD-ROM on Windows Explorer to open, and
double-click [SetupLauncher.exe].
The English edition of the operating instructions is
supplied as a booklet as well.
For customers in Europe
Disposal of Old Electrical &
Electronic Equipment (Applicable
in the European Union and other
European countries with separate
collection systems)
This symbol on the product or on its
packaging indicates that this product
shall not be treated as household
waste. Instead it shall be handed over
to the applicable collection point
for the recycling of electrical and
electronic equipment. By ensuring this
product is disposed of correctly, you
will help prevent potential negative consequences
for the environment and human health, which could
otherwise be caused by inappropriate waste handling
of this product. The recycling of materials will help
to conserve natural resources. For more detailed
information about recycling of this product, please
contact your local Civic Oce, your household waste
disposal service or the shop where you purchased
the product.
Applicable accessories: Headphones, USB connection
support cable
Disposal of waste batteries
(applicable in the European Union
and other European countries with
separate collection systems)
This symbol on the battery or on the
packaging indicates that the battery
provided with this product shall not
be treated as household waste.
By ensuring these batteries are
disposed of correctly, you will help prevent potentially
negative consequences for the environment and
human health which could otherwise be caused
by inappropriate waste handling of the battery. The
recycling of the materials will help to conserve natural
resources.
In case of products that for safety, performance
or data integrity reasons require a permanent
connection with an incorporated battery, this battery
should be replaced by qualied service sta only.
To ensure that the battery will be treated properly,
hand over the product at end-of-life to the applicable
collection point for the recycling of electrical and
electronic equipment.
For all other batteries, please view the section on how
to remove the battery from the product safely. Hand
the battery over to the applicable collection point for
the recycling of waste batteries.
For more detailed information about recycling of this
product or battery, please contact your local Civic
Oce, your household waste disposal service or the
shop where you purchased the product.
ICD-UX71/UX81/UX71F/UX81F/UX91F QSG GB/FR/ES/NL 4-114-026-11(1)
3
GB
Notice for the customers: the
following information is only
applicable to equipment sold
in the countries applying EU
directives
The manufacturer of this product is Sony Corporation,
1-7-1 Konan, Minato-ku, Tokyo, Japan. The Authorized
Representative for EMC and product safety is Sony
Deutschland GmbH, Hedelnger Strasse 61, 70327
Stuttgart, Germany. For any service or guarantee
matters please refer to the addresses given in separate
service or guarantee documents.
The recorded music is limited to private use
only. Use of the music beyond this limit requires
permission of the copyright holders.
Sony is not responsible for incomplete
recording/downloading or damaged data due
to problems of the IC recorder or computer.
Depending on the types of the text and
characters, the text shown on the IC recorder
may not be displayed properly on device. This
is due to:
The capacity of the connected IC recorder.
The IC recorder is not functioning normally.
Content information is written in the
language or the character that is not
supported by the IC recorder.
ICD-UX71/UX81/UX71F/UX81F/UX91F QSG GB/FR/ES/NL 4-114-026-11(1)
4
GB
Table of Contents
Checking the Contents of
the Package .......................................................5
Getting Started
Step 1: Preparing a Power Source .......6
Step 2: Setting the Clock ...........................7
Step 3: Setting the Language to Be
Used in the Display Window ..................10
Turning the IC Recorder On or Off ......11
Recording/Playing Back
Messages
Recording Messages....................................12
Playing Back Messages ...............................14
Editing Messages
Erasing Messages...........................................15
Utilizing Your Computer
Using the IC Recorder with Your
Computer ...........................................................18
Transferring Files from Your Computer
to the IC Recorder .........................................21
Playing Back Music Files ............................22
Listening to the FM Radio
Tuning in an FM radio Station ...............23
Presetting FM Radio Stations
Automatically ...................................................25
Listening to a Preset Radio Station .....26
Erasing Preset FM Radio Stations .........28
Precautions ........................................................29
ICD-UX71/UX81/UX71F/UX81F/UX91F QSG GB/FR/ES/NL 4-114-026-11(1)
5
GB
Checking the Contents
of the Package
IC Recorder (1)
Remove the film on the display window
before you use the IC recorder.
NH-AAA (size AAA) rechargeable battery (1)
Stereo headphones (1)
USB connection support cable (1)
Carrying case (1)
Battery case (1)
CD-ROM (1)
(The operating instructions are stored
as PDF files.)
Operating Instructions
ICD-UX71/UX81/UX71F/UX81F/UX91F QSG GB/FR/ES/NL 4-114-026-11(1)
6
GB
Getting Started
Step 1: Preparing a
Power Source
Remove the lm on the display window
before you use the IC recorder.
Inserting the battery
1 Slide and lift the battery
compartment lid.
2 Insert one NH-AAA rechargeable
battery with correct polarity, and
close the lid.
3 Charge the battery by connecting
the USB connector of the IC
recorder to your computer.
To USB connector
IC recorder
Computer
ICD-UX71/UX81/UX71F/UX81F/UX91F QSG GB/FR/ES/NL 4-114-026-11(1)
7
GB
Disconnecting the IC
recorder from your
computer
Follow the procedures below; otherwise,
data may be damaged.
1 Make sure that the operation
indicator is not ashing.
2 Disconnect the IC recorder from the
USB connector of the computer.
On the Windows screen, left-click
“Safely Remove Hardware on the
taskbar, and click “Safely remove USB
Mass Storage Device.
On the Macintosh screen, drag the “IC
RECORDER” on the desktop to Trash
and drop it there.
For details on disconnecting the
IC recorder, refer to the operating
instructions supplied with your
computer.
Step 2: Setting the
Clock
,
ENT
/MENU
You need to set the clock to use the
alarm function or record the date and
time.
Clock setting display appears when you
insert battery for the rst time, or when
you insert a battery after the IC recorder
has been without battery for more than
3 minutes, “SET DATE & TIME” appears,
and then the year section ashes in the
display window.
ICD-UX71/UX81/UX71F/UX81F/UX91F QSG GB/FR/ES/NL 4-114-026-11(1)
8
GB
Continued directly from
“Step 1: Preparing a Power
Source
1 Press or on the control button
to set the year, month, day, hour,
and minute in sequence, and then
press ENT.
2 Press (stop) to return to the
display of the stop mode.
Setting the clock using the
menu
While the IC recorder is in the stop mode,
you can set the clock using the menu.
1 Select “DATE & TIME” in the menu.

Press and hold /MENU to enter the
menu mode.
The menu mode will be displayed in
the display window.

Press or on the control button to
select “DETAIL MENU, and then press
ENT.

Press or on the control button to
select “DATE & TIME, and then press
ENT.
ICD-UX71/UX81/UX71F/UX81F/UX91F QSG GB/FR/ES/NL 4-114-026-11(1)
9
GB
2 Press the or on the control
button to select “08y1m1d, and
then press ENT.
3 Press or on the control button
to set the year, month, day, hour,
and minute in sequence, and then
press ENT.
4 Press (stop) to return to the
display of the stop mode.
Note
If you do not press ENT within one minute
of entering the clock setting data, the clock
setting mode is cancelled and the window will
return to the display of the stopmode.
To display the current date and
time
Press (stop) to display the current date
and time.
ICD-UX71/UX81/UX71F/UX81F/UX91F QSG GB/FR/ES/NL 4-114-026-11(1)
10
GB
Step 3: Setting the
Language to Be Used
in the Display Window
,
ENT
/MENU
You can select the language to be used
for messages, menus, folder names, le
names, etc. from 2 languages (European
model)/7 languages (other models).
1 Press and hold /MENU to enter
the menu mode.
The menu mode window will be
displayed.
2 Press or on the control button
to select “DETAIL MENU, and then
press ENT.
3 Press or on the control button
to select “LANGUAGE, and then
press ENT.
4 Press or on the control button
to select the language that you
want to use, and then press ENT.
You can select the following languages.
European model :
ENGLISH, Pyccкий (Russian)
Other models :
ENGLISH, Pyccкий (Russian),
(Japanese), (Korean),
(Chinese), (Chinese),
(Thai)
ICD-UX71/UX81/UX71F/UX81F/UX91F QSG GB/FR/ES/NL 4-114-026-11(1)
11
GB
Turning the IC
Recorder On or O
When you are not using the IC recorder,
you can prevent the battery from getting
weak quickly by turning the power o.
Turning the power o
Slide the HOLD switch in the direction of
the arrow in the stop mode. “HOLD” lights
up and the key mark ashes and then
“POWER OFF” is displayed. The IC recorder
turns o within a few seconds.
Turning the power on
Slide the HOLD switch in the opposite
direction from that of the arrow. The IC
recorder is turned on, and an accessing
animation is displayed.
Tips
When you are not going to use the IC
recorder for a long time, we recommend to
turn off the IC recorder.
When 10 minutes have passed after you
have turned on the IC recorder and leave it
without doing anything, the display goes
off automatically. (Press any button to show
the display.)
ICD-UX71/UX81/UX71F/UX81F/UX91F QSG GB/FR/ES/NL 4-114-026-11(1)
12
GB
Recording/Playing Back Messages
Recording Messages
ENT
,
(headphone)
jack
Built-in
microphones
Operation
indicator
/MENU
1 Select a folder.

Press /MENU to display the folder
selection window.

Press or on the control button to
select the folder in which you want to
record messages ( FOLDER01-05),
and then press ENT.
2 Start recording.

Press (record/pause) in the stop
mode.
The operation indicator lights in red.
(When “LED is set to “OFF” in the
menu, the operation indicator does
not light.)
You do not need to press and hold
(record/pause) while recording.
ICD-UX71/UX81/UX71F/UX81F/UX91F QSG GB/FR/ES/NL 4-114-026-11(1)
13
GB
The new message will be
automatically recorded after the last
recorded message.

Speak into the built-in microphones.
3 Press (stop) to stop recording.
The IC recorder stops at the beginning
of the current recording.
ICD-UX71/UX81/UX71F/UX81F/UX91F QSG GB/FR/ES/NL 4-114-026-11(1)
14
GB
Playing Back
Messages

VOL +, –
,
/MENU
Operation
indicator
1 Select a folder.

Press /MENU.

Press or on the control button to
select the folder, and then press ENT.
2 Press or to select the
message you want to play.
3 Press  to start playback.
The operation indicator lights in green.
(When “LED is set to “OFF” in the
menu, the operation indicator does
not light.)
4 Press VOL + or – on the control
button to adjust the volume.
5 Press (stop) to stop playback.
ICD-UX71/UX81/UX71F/UX81F/UX91F QSG GB/FR/ES/NL 4-114-026-11(1)
15
GB
Editing Messages
Erasing Messages
You can erase the recorded messages
one by one or all messages in a folder at
a time.
Note
Once a recording has been erased, you cannot
retrieve it.
Erasing messages one by one
,
ENT
/MENU
You can erase unwanted messages,
retaining all other messages when the IC
recorder is in the stop or playback mode.
When a message is erased, the
remaining messages will advance and
be renumbered so that there will be no
space between messages.
1 Select the message you want to
erase.
2 Press and hold /MENU to enter
the menu mode.
The menu mode window will be
displayed.
3 Press or on the control button
to select “ERASE A FILE, and then
press ENT.
The message to be erased will be
played back.
ICD-UX71/UX81/UX71F/UX81F/UX91F QSG GB/FR/ES/NL 4-114-026-11(1)
16
GB
4 Press or on the control button
to select “EXECUTE, and then press
ENT.
“ERASING … appears in the display
window and the selected message will
be erased.
To cancel erasing
Select “CANCEL in step 4, and then press
ENT.
To erase another message
Proceed with the same steps again from
the beginning.
To erase a part of one message
Divide the message into two messages
rst, and then proceed with the same
steps from the beginning.
Erasing all messages in a
folder
,
ENT
/MENU
1 Select the folder containing the
messages you want to erase when
the IC recorder is in the stop mode.
2 Press and hold /MENU to enter
the menu mode.
The menu mode window will be
displayed.
ICD-UX71/UX81/UX71F/UX81F/UX91F QSG GB/FR/ES/NL 4-114-026-11(1)
17
GB
3 Press or on the control button
to select “ERASE ALL, and then
press ENT.
4 Press or on the control button
to select “EXECUTE, and then press
ENT.
“ERASING … appears in the display
window and all messages in the
selected folder will be erased.
To cancel erasing
Select “CANCEL in step 4, and then press
ENT.
ICD-UX71/UX81/UX71F/UX81F/UX91F QSG GB/FR/ES/NL 4-114-026-11(1)
18
GB
Utilizing Your Computer
Using the IC Recorder
with Your Computer
System requirements
Operating systems:
Windows Vista® Ultimate
Windows Vista® Business
Windows Vista® Home Premium
Windows Vista® Home Basic
Windows® XP Media Center Edition 2005
Service Pack 2 or higher
Windows® XP Media Center Edition 2004
Service Pack 2 or higher
Windows® XP Media Center Edition
Service Pack 2 or higher
Windows® XP Professional
Service Pack 2 or higher
Windows® XP Home Edition
Service Pack 2 or higher
Windows® 2000 Professional Service Pack
4 or higher
Mac OS X (v10.2.8-v10.5)
Pre-Installed
Notes
Operation is not guaranteed if any operating
system other than those described above
(Windows® 98 or Linux, etc.) is used.
Any 64 bit operating system is not
supported.
For the latest version information and
compatibility with your operating system,
please access the support home page for
the IC recorder:
European model:
http://support.sony-europe.com/DNA
Other models:
http://www.sony-asia.com/support
Hardware environment:
– Port: USB port
– Sound board: Sound cards
compatible with any of the supported
Microsoft® Windows® operating
systems
Note
The following systems are not supported:
Operating systems other than the ones
indicated on the left
Personally constructed computers or
operating systems
Upgraded operating systems
Multi-boot environment
Multi-monitor environment
ICD-UX71/UX81/UX71F/UX81F/UX91F QSG GB/FR/ES/NL 4-114-026-11(1)
19
GB
When you are using Window
2000 Professional
Install the driver using “SonyRecorder_
Driver.exe in the IC recorder.
Connecting the IC recorder
to your computer
You can transfer the IC recorder data
onto your computer by connecting the
IC recorder to the computer.
Remove the USB cap from the IC recorder
and then connect the IC recorder to the
USB connector of your computer.
The IC recorder is recognized by the
computer as soon as the connection is
made. While the IC recorder is connected
to the computer, “CONNECTING” is
displayed in the display window of the
IC recorder.
To USB connector
IC recorder
Computer
Tip
If the IC recorder cannot be connected to the
USB connector of your computer directly, use
the supplied USB connection support cable.
USB connection
support cable
(supplied)
ICD-UX71/UX81/UX71F/UX81F/UX91F QSG GB/FR/ES/NL 4-114-026-11(1)
20
GB
Notes
If you connect more than two USB devices
to your computer, normal operation will not
be guaranteed.
Use of this IC recorder with a USB hub or a
USB connection support cable other than
the supplied cable is not guaranteed.
A malfunction may occur depending on the
USB devices connected at the same time.
Before connecting the IC recorder to the
computer, make sure that the battery is
inserted in the IC recorder.
It is recommended that you disconnect the
IC recorder from the computer when you are
not using the IC recorder connected to the
computer.
Disconnecting the IC
recorder from your
computer
Follow the procedures below; otherwise,
data may be damaged.
1 Make sure that the operation
indicator is not ashing.
2 Disconnect the IC recorder from the
USB connector of the computer.
On the Windows screen, left-click
“Safely Remove Hardware on the
taskbar, and click “Safely remove USB
Mass Storage Device.
On the Macintosh screen, drag the “IC
RECORDER” on the desktop to Trash
and drop it there.
For details on disconnecting the
IC recorder, refer to the operating
instructions supplied with your
computer.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122

Sony ICD-UX71F Manuel utilisateur

Taper
Manuel utilisateur

dans d''autres langues