Sony NEX-5TL Le manuel du propriétaire

U:\CX76500_kaihan_PL\4469371412\4469371412NEX5TCE\00COV-

NEX5TCE\010COV.fm

master: Right

NEX-5T

4-469-371-41(2)

4-469-37 1-41(2)

NEX-5T

E-mount

Interchangeable Lens Digital Camera/Instruction Manual GB

Appareil photo à objectif interchangeable/Mode d’emploi FR

Digitalkamera mit Wechselobjektiv/Gebrauchsanleitung DE

Cámara Digital de Lentes Intercambiables/Manual de instrucciones ES

Fotocamera digitale con obiettivo intercambiabile/Istruzioni per l’uso IT

Câmara Digital de Objetivas intercambiáveis/Manual de instruções PT

Digitale camera met verwisselbare lens/Gebruiksaanwijzing NL

PL

Digitalkamera med utbytbart objektiv/Handledning SE

Digitaalinen kamera vaihdettavalla objektiivilla/Käyttöopas FI

Digitalkamera med utskiftbart objektiv/Bruksanvisning NO

Digitalkamera med udskifteligt objektiv/Betjeningsvejledning DK

U:\CX76500_kaihan_PL\4469371412\4469371412NEX5TCE\00COV-

NEX5TCE\100BCO.fm

master: Right

NEX-5T

4-469-371-41(2)

GB

2

Owner’s Record

The model and serial numbers are located on the bottom. Record the serial number in the

space provided below. Refer to these numbers whenever you call your Sony dealer

regarding this product.

Model No. NEX-5T

Serial No. ______________________________

Model No. AC-UB10C/AC-UB10D

Serial No. ______________________________

To reduce fire or shock hazard, do not expose the unit to rain or

moisture.

IMPORTANT SAFETY INSTRUCTIONS

-SAVE THESE INSTRUCTIONS

DANGER

-TO REDUCE THE RISK OF FIRE OR

ELECTRIC SHOCK, CAREFULLY FOLLOW

THESE INSTRUCTIONS

If the shape of the plug does not fit the power outlet, use an attachment plug adaptor of the

proper configuration for the power outlet.

[ Battery pack

If the battery pack is mishandled, the battery pack can burst, cause a fire or even chemical

burns. Observe the following cautions.

• Do not disassemble.

• Do not crush and do not expose the battery pack to any shock or force such as

hammering, dropping or stepping on it.

• Do not short circuit and do not allow metal objects to come into contact with the battery

terminals.

English

E-mount

WARNING

CAUTION

GB

3

• Do not expose to high temperature above 60°C (140°F) such as in direct sunlight or in a

car parked in the sun.

• Do not incinerate or dispose of in fire.

• Do not handle damaged or leaking lithium ion batteries.

• Be sure to charge the battery pack using a genuine Sony battery charger or a device that

can charge the battery pack.

• Keep the battery pack out of the reach of small children.

• Keep the battery pack dry.

• Replace only with the same or equivalent type recommended by Sony.

• Dispose of used battery packs promptly as described in the instructions.

[ AC Adaptor

Use the nearby wall outlet (wall socket) when using the AC Adaptor. Disconnect the AC

Adaptor from the wall outlet (wall socket) immediately if any malfunction occurs while

using the apparatus.

The power cord (mains lead), if supplied, is designed specifically for use with this camera

only, and should not be used with other electrical equipment.

[ RECYCLING LITHIUM-ION BATTERIES

Lithium-Ion batteries are recyclable.

You can help preserve our environment by returning your used

rechargeable batteries to the collection and recycling location nearest

you.

For more information regarding recycling of rechargeable batteries,

call toll free

1-800-822-8837, or visit http://www.call2recycle.org/

Caution: Do not handle damaged or leaking Lithium-Ion batteries.

[ Battery pack and lens (If lens supplied)

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

CAN ICES-3 B/NMB-3 B

This equipment complies with FCC/IC radiation exposure limits set forth for an

uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines

in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules.

This equipment has very low levels of RF energy that are deemed to comply without

testing of specific absorption ratio (SAR).

For Customers in the U.S.A. and Canada

GB

4

UL is an internationally recognized safety organization.

The UL Mark on the product means it has been UL Listed.

If you have any questions about this product, you may call:

Sony Customer Information Center

1-800-222-SONY (7669)

The number below is for the FCC related matters only.

[ Regulatory Information

This equipment must not be co-located or operated in conjunction with any other antenna

or transmitter.

[ CAUTION

You are cautioned that any changes or modifications not expressly approved in this manual

could void your authority to operate this equipment.

[ Note:

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in

a residential installation. This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and receiver.

– Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

– Consult the dealer or an experienced radio/TV technician for help.

For Customers in the U.S.A.

Declaration of Conformity

Trade Name: SONY

Model No.: NEX-5T

Responsible Party: Sony Electronics Inc.

Address: 16530 Via Esprillo, San Diego, CA 92127 U.S.A.

Telephone No.: 858-942-2230

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference, and (2)

this device must accept any interference received, including interference that may cause

undesired operation.

GB

5

The supplied interface cable must be used with the equipment in order to comply with the

limits for a digital device pursuant to Subpart B of Part 15 of FCC Rules.

This device complies with Industry Canada licence-exempt RSS standard(s).

Operation is subject to the following two conditions: (1) this device may not cause

interference, and (2) this device must accept any interference, including interference that

may cause undesired operation of the device.

[ Notice for the customers in the countries applying EU Directives

Manufacturer: Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan

For EU product compliance: Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327

Stuttgart, Germany

Hereby, Sony Corporation, declares that this NEX-5T Interchangeable Lens Digital

Camera is in compliance with the essential requirements and other relevant provisions of

Directive 1999/5/EC. For details, please access the following URL:

http://www.compliance.sony.de/

[ Notice

If static electricity or electromagnetism causes data transfer to discontinue midway (fail),

restart the application or disconnect and connect the communication cable (USB, etc.)

again.

This product has been tested and found compliant with the limits set out in the EMC

regulation for using connection cables shorter than 3 meters (9.8 feet).

The electromagnetic fields at the specific frequencies may influence the picture and sound

of this unit.

For Customers in Canada

For Customers in Europe

GB

6

[ Disposal of Old Electrical & Electronic Equipment (Applicable in

the European Union and other European countries with separate

collection systems)

This symbol on the product or on its packaging indicates that this product

shall not be treated as household waste. Instead it shall be handed over to

the applicable collection point for the recycling of electrical and electronic

equipment. By ensuring this product is disposed of correctly, you will help

prevent potential negative consequences for the environment and human

health, which could otherwise be caused by inappropriate waste handling

of this product. The recycling of materials will help to conserve natural

resources. For more detailed information about recycling of this product,

please contact your local Civic Office, your household waste disposal service or the shop

where you purchased the product.

[ Disposal of waste batteries (applicable in the European Union

and other European countries with separate collection systems)

This symbol on the battery or on the packaging indicates that the battery

provided with this product shall not be treated as household waste.

On certain batteries this symbol might be used in combination with a

chemical symbol. The chemical symbols for mercury (Hg) or lead (Pb) are

added if the battery contains more than 0.0005% mercury or 0.004% lead.

By ensuring these batteries are disposed of correctly, you will help prevent

potentially negative consequences for the environment and human health which could

otherwise be caused by inappropriate waste handling of the battery. The recycling of the

materials will help to conserve natural resources.

In case of products that for safety, performance or data integrity reasons require a

permanent connection with an incorporated battery, this battery should be replaced by

qualified service staff only. To ensure that the battery will be treated properly, hand over

the product at end-of-life to the applicable collection point for the recycling of electrical

and electronic equipment.

For all other batteries, please view the section on how to remove the battery from the

product safely.

Hand the battery over to the applicable collection point for the recycling of waste batteries.

For more detailed information about recycling of this product or battery, please contact

your local Civic Office, your household waste disposal service or the shop where you

purchased the product.

GB

7

For Customers in Singapore

For details on Wi-Fi functions, see the flyer “Wi-Fi Connection/One-touch

(NFC) Guide.”

This manual covers several models supplied with different lenses.

The model name varies depending on the supplied lens. The available model varies

depending on the countries/regions.

Model name Lens

NEX-5T Not supplied

NEX-5TL E16 – 50 mm

NEX-5TY E55 – 210 mm and E16 – 50 mm

GB

8

Preparing the camera

Checking the supplied items

First check the model name of your camera (page 7). The accessories supplied

differ depending on the model.

The number in parentheses indicates the quantity.

x

Supplied with all models

• Camera (1)

• Power cord (mains lead) (1)* (not

supplied in the U.S.A. and Canada)

* Multiple power cords may be

supplied with your camera. Use the

appropriate one that matches your

country/region.

• Rechargeable battery pack

NP-FW50 (1)

• Micro USB cable (1)

• AC adaptor AC-UB10C/UB10D

(1)

• Shoulder strap (1)

• Flash HVL-F7S (1)/Flash case (1)

•CD-ROM (1)

– Application Software for

α camera

– α Handbook

• Instruction Manual (This manual)

(1)

x

NEX-5T

• Body cap (1) (attached to the

camera)

x

NEX-5TL

• E16 – 50 mm zoom lens (1)

(attached to the camera)/Front lens

cap (1) (attached to the lens)

x

NEX-5TY

• E16 – 50 mm zoom lens (1)

(attached to the camera)/Front lens

cap (1) (attached to the lens)

• E55 – 210 mm zoom lens (1)/Front

lens cap (1)/Rear lens cap (1)/Lens

hood (1)

GB

9

GB

Identifying parts

See the pages in parentheses for details on operation for the parts.

When the lens is removed

A Shutter button (26)

B Hook for shoulder strap

Attach the shoulder strap to prevent

damage caused by dropping the

camera.

C Fn (Function) button

D (N mark)

• This mark indicates the touch

point for connecting the camera

and an NFC-enabled

Smartphone.

For details on the location of the

N mark on your Smartphone,

refer to the operating instructions

of the Smartphone.

• NFC (Near Field

Communication) is an

international standard of short-

range wireless communication

technology.

E Remote sensor

F ON/OFF (Power) switch (23)

G AF illuminator/Self-timer lamp/

Smile Shutter lamp

H Smart Accessory Terminal 2

1)

I Microphone

2)

J Lens (18)

K Lens release button (19)

L Mount

M Image sensor

3)

N Lens contacts

3)

GB

10

1)

Accessories for the Smart

Accessory Terminal can also be

attached.

You cannot use the [Self-portrait

Self-timer] function when a flash

HVL-F7S (supplied) or accessories

are attached to the Smart Accessory

Terminal 2.

2)

Do not cover this part during movie

recording.

3)

Do not touch this part directly.

A Image sensor position mark

B Wi-Fi sensor (built-in)

C Charge lamp

D Micro USB terminal

E HDMI terminal

F LCD screen/Touch panel

4)

G (Playback) button (28)

H Control dial (32)

I MOVIE button (27)

J Soft key A (32)

K Control wheel (31)

L Soft key C (32)

M Soft key B (32)

4)

• You can adjust the LCD screen to

an easily viewable angle and shoot

from any position.

• Tilt the LCD screen upward about

180 degrees when you take a self-

portrait. The 3-second delay self-

timer is automatically selected in

the default setting.

• When storing the LCD screen after

Self-portrait shooting, lower the

LCD screen completely until it fits

against the camera body, then slide

the LCD screen upward until both

the bottoms of the LCD screen and

the camera body are aligned.

GB

11

GB

A Battery/memory card cover (13,

20)

B Access lamp (21)

C Memory card insertion slot (20)

D Battery compartment (13)

E Connection plate cover

Use this when using an AC-PW20

AC Adaptor (sold separately).

Insert the connection plate into the

battery compartment, and then pass

the cord through the connection

plate cover as shown below.

• Make sure that the cord is not

pinched when you close the

cover.

F Tripod socket hole

• Use a tripod with a screw length

of less than 5.5 mm (7/32 inch).

You will be unable to firmly

secure the camera to tripods

using screws longer than 5.5 mm

(7/32 inch), and may damage the

camera.

G Speaker

x

Flash HVL-F7S

A Screw

B Flash

1)

C Connector

1)

Do not touch this part directly.

If it is dirty, wipe it off with a soft

clean cloth.

GB

12

x

Lens

See page 61 on the specifications of

the lenses.

E PZ 16 – 50 mm F3.5-5.6

OSS (supplied with

NEX-5TL/NEX-5TY)

A Zooming/Focusing ring

B Zooming lever

C Mounting index

D Lens contacts

1)

Do not touch this part directly.

E55 – 210 mm F4.5-6.3 OSS

(supplied with NEX-5TY)

A Focusing ring

B Zooming ring

C Focal-length scale

D Focal-length index

E Lens contacts

1)

F Mounting index

1)

Do not touch this part directly.

GB

13

GB

Charging the battery pack

When using the camera for the first time, be sure to charge the NP-FW50

“InfoLITHIUM” battery pack (supplied).

The “InfoLITHIUM” battery pack can be charged even when it has not been

fully depleted. The battery pack can also be used when it has not been fully

charged.

The charged battery pack is discharged little by little, even when you do not

use it. To avoid missing an opportunity to shoot, charge the battery pack again

before you shoot.

1

Set the power switch to OFF.

2

Open the cover by sliding the

lever.

3

Insert the battery pack

completely, using the tip of

the battery to press the lock

lever.

Lock lever

GB

14

4

Close the cover.

5

Connect the camera to the AC Adaptor (supplied), using

the micro USB cable (supplied). Connect the AC Adaptor

to the wall outlet (wall socket).

• When using the USB cable, insert and remove it in a straight line and do

not exert undue force.

• Even when fully inserted into the camera, the metal portion of the USB

cable (supplied) will be visible.

Charge lamp

Lit: Charging

Off: Charging finished

Flashing: Charging error or

charging temporarily stopped

because the temperature is

outside the recommended

range.

The charge lamp lights orange, and charging starts.

• Set the power switch to OFF while charging the battery. If the power

switch is set to ON, the camera cannot charge the battery.

• When the charge lamp flashes, remove and re-insert the battery pack.

Power cord

(Mains lead)

For customers in the

USA and Canada

For customers in

countries/regions other

than the USA and

Canada

GB

15

GB

• If the charge lamp on the camera flashes when the AC Adaptor is connected to the

wall outlet (wall socket), this indicates that charging is temporarily stopped

because the temperature is outside the recommended range. When the temperature

gets back within the appropriate range, the charging resumes. We recommend

charging the battery pack in an ambient temperature of between 10 °C and 30 °C

(50 ºF and 86 ºF).

• The charge lamp may flash quickly when the battery pack is used for the first time,

or the battery pack has not been used for a long time. In such cases, remove the

battery pack and re-insert it, and then charge the battery pack.

• Do not try to charge the battery pack again right after it has been charged, or when

it has not been used after being charged. Doing so will affect the performance of

the battery pack.

• When charging is finished, disconnect the AC Adaptor from the wall outlet (wall

socket).

• Be sure to use only genuine Sony brand battery packs, micro USB cable (supplied)

and AC Adaptor (supplied).

x

Charging time

The charging time is approximately 280 minutes using the AC Adaptor

(supplied).

• The above charging time applies when charging a fully depleted battery pack

(supplied) at a temperature of 25 °C (77 °F). Charging time may take longer

depending on conditions of use and circumstances.

Notes

GB

16

x

Charging by connecting to a computer

The battery pack can be charged by connecting the camera to a computer using

a micro USB cable.

• Note the following points when charging via a computer:

– If the camera is connected to a laptop computer that is not connected to a power

source, the laptop battery level decreases. Do not leave the camera connected to

a computer for an extended period of time.

– Do not turn on/off or restart the computer, or wake the computer to resume from

sleep mode when a USB connection has been established between the computer

and the camera. That may cause the camera to malfunction. Before turning on/

off, or restarting the computer or waking the computer from sleep mode,

disconnect the camera from the computer.

– We do not guarantee operation with all computers. No guarantees are made for

charging using a custom-built computer, a modified computer, or charging via a

USB hub. You may not be able to operate the camera properly, depending on the

types of USB devices you are using at the same time.

Notes

z Using your camera abroad — Power source

You can use your camera and AC Adaptor in any countries/regions where the

power supply is within 100 V to 240 V AC, 50 Hz/60 Hz.

An electronic voltage transformer is unnecessary and its use may cause a

malfunction.

GB

17

GB

x

Checking the remaining battery level

Check the level with the following indicators and percent figures displayed on

the LCD screen.

• In some circumstances, the displayed battery level may differ from the actual

battery level.

x

Removing the battery pack

Battery level

“Battery

exhausted.”

High Low

You cannot

shoot any more

image.

Notes

Turn off the camera, make sure that the

access lamp is not lit, slide the lock lever

in the direction of the arrow, and pull out

the battery pack. Be careful not to drop the

battery pack.

Access lamp

z What is an “InfoLITHIUM” battery pack?

An “InfoLITHIUM” battery pack is a lithium-ion battery pack that has functions

for exchanging information related to operating conditions with your camera.

Using the “InfoLITHIUM” battery pack, the remaining battery time in percent

figures is displayed according to the operating conditions of your camera.

Lock lever

GB

18

Attaching/removing the lens

Set the power switch of the camera to OFF before you attach or remove the

lens.

• When attaching a lens, do not press the lens release button.

• Do not use excessive force when attaching a lens.

• The Mount Adaptor (sold separately) is required to use an A-mount lens (sold

separately). For details, refer to the operating manual supplied with the Mount

Adaptor.

• When using a lens equipped with a tripod socket, attach the socket on the lens side

to the tripod to maintain balance.

1

If the cap or the packaging lid

is attached, remove it from the

camera or the lens.

• Quickly change the lens somewhere

away from dusty locations so as to

keep dust or debris from getting

inside the camera.

2

Mount the lens by aligning the

white index marks on the lens

and the camera.

• Hold the camera’s face downward

to prevent the dust from entering

into the camera.

3

While pushing the lens lightly

toward the camera, turn the

lens clockwise until it clicks

into the locked position.

• Be sure to put the lens on straight.

Notes

GB

19

GB

x

Removing the lens

• If dust or debris gets inside the camera while you are changing the lens and

adheres to the surface of the image sensor (the part that converts the light source to

a digital signal), it may appear as dark spots on the image, depending on the

shooting environment. The camera vibrates slightly when it is turned off, due to

the anti-dust function, to prevent dust from adhering to the image sensor.

However, attach or remove the lens quickly somewhere away from dusty

locations.

• Do not leave the camera with the lens removed.

• When you want to use body caps or rear lens caps, please purchase ALC-B1EM

(Body cap) or ALC-R1EM (Rear lens cap) (sold separately).

• When you use a lens with a power zoom, set the power switch of the camera to

OFF and confirm that the lens is completely retracted before switching lenses. If

the lens has not retracted, do not press the lens in by force.

• When attaching the camera to a tripod, be sure not to touch the zooming/focusing

ring.

1

Press the lens release button

all the way in and turn the lens

counterclockwise until it

stops.

Lens release button

Notes

GB

20

Inserting a memory card (sold separately)

1

Open the cover.

2

Insert a memory card.

• Insert the memory card until it

clicks as illustrated.

Check on the direction of

the notched corner.

3

Close the cover.

La page est en cours de chargement...

Sony NEX-5TL Le manuel du propriétaire

Ce manuel convient également à

Sony NEX-5TL Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents