Cobra IRAD 900 Le manuel du propriétaire
- Taper
- Le manuel du propriétaire
Windshield
Quick Start Guide
Printed in the Philippines Part No. 480-859-P Version C
Cobra iRadar
®
ATOM
™
uses Bluetooth
®
wireless technology to connect to your iOS or Android
™
device. Through this connection, the Cobra iRadar app
displays radar/laser alerts, lets you customize detector
settings, and provides access to the iRadar Community.
Cobra iRadar is made for:
iPod touch (5th Generation)
iPod touch (4th Generation)
iPhone 5
iPhone 4S
iPhone 4
Android
®
smartphones running OS 2.1 or higher
Mounting iRadar ATOM
iRadar ATOM should be mounted on the windshield or
dashboard of your vehicle. 3 mounting options are included:
Suction Cup Mount –
This is the best option for
portability and moving the detector
from car to car. Make sure to thor-
oughly clean the suction cups and
windshield mounting area
to insure a tight seal.
Dual Lock
®
Mount –
This mount is discreet and very solid for
a permanent mounting location. Make
sure the adhesive side of the included
Dual Lock is securely fastened to the
windshield before adding the
weight of the detector to it.
Hook and Loop Fastener–
Included for dashboard mounting.
Your detector should be
mounted so that it is oriented
parallel to the road.
The suction cup mount comes
standard bent at a 45° angle
and Dual Lock
®
at 30°. The
metal is designed to bend with-
out breaking. Adjust the angle
so when mounted the detector is
level with the road.
Note: Do not attempt to bend
the mount while the detector
is attached.
Suction Cup Mount
Dual Lock
®
Mount
Hook & Loop Fastener
Incorrect Positions
Correct Position
Model iRAD 900
Dual Lock® is a registered trademark of 3M Corporation.
Powering iRadar ATOM
Plug in your iRadar ATOM using the
included cigarette lighter adapter.
Note: the adapter includes a USB
port that can be used to charge your
smartphone or tablet using the manu-
facturer’s charging cable.
For more discreet installation, a
hardwire kit is available at
www.cobra.com, part number
RA-PSC B. This can be easily wired
into your fuse box so that iRadar
automatically turns on when your
car is running and does not require
professional installation.
Turn iRadar ATOM on/off by pressing
and holding the Power/Volume
switch on the side of the unit. The
LED on the front of the unit will
shine red.
RA-PSC B
NOTE: This device complies with part 15 of FCC rules: Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
This device must accept any interference received including interference that may
cause undesired operation.
CAUTION: Modifications or parts not approved by Cobra Electronics Corporation may
violate FCC Rules and void authority to operate this equipment.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is
subject to the following two conditions: (1) this device may not cause interference, and (2)
this device must accept any interference, including interference that may cause undesired
operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils
radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes
: (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit
accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en
compromettre le fonctionnement.
Follow these simple steps to get your iRadar ATOM
up and running:
iRAD900_QSG_P.indd 1 12/20/13 9:23 AM
-
1
Cobra IRAD 900 Le manuel du propriétaire
- Taper
- Le manuel du propriétaire
dans d''autres langues
- English: Cobra IRAD 900 Owner's manual