VTech Go! Go! Smart Wheels® Revved Up Stunt Spiral™ Le manuel du propriétaire

Catégorie
Jouets
Taper
Le manuel du propriétaire
Parents Guide
Revved Up Stunt SpiralTM
US
91-003783-008
CA
2
2
2
INTRODUCTION
Thank you for purchasing the Go! Go! Smart Wheels® Revved Up
Stunt SpiralTM toy. Race around the 360° loop and into the race! Press
down on the launcher to send Reggie the Race Car down the track
toward the super launcher. Give it a turn and watch him zip around the
360° loop and out the gate for a roaring finish. This track features two-in-
one fun! Change your track configuration fto create a roller-coaster hill.
SmartPoint®
Race Car
Super Launcher
360° Loop
Launcher
Action Button
Light-Up Face Button
On/Off Switch
3
3
3
INCLUDED IN THIS PACKAGE
NOTE: This toy is not intended for teething.
One base
One handle
One downhill
ramp track
One launcher part B
One uphill ramp
track
One rotator
One ¼ track B
One SmartPoint®
Race Car
One launcher part A
One arc track
One handle
pedestal
One ¼ track A
4
4
4
WARNING
All packing materials such as tape, plastic sheets, packaging locks,
removable tags, cable ties and packaging screws are not part of this
toy, and should be discarded for your child’s safety.
NOTE
Please keep this parent’s guide as it contains important information.
ATTENTION
Pour la sécurité de votre enfant, débarrassez-vous de tous les produits
d’emballage tels que rubans adhésifs, feuilles de plastique, attaches,
étiquettes et vis d’emballage. Ils ne font pas partie du jouet.
NOTE
Il est conseillé de conserver ce guide des parents car il comporte des
informations importantes.
Unlock the Packaging Locks
Rotate the packaging lock 360°
counterclockwise.
Pull out the packaging lock and discard.
One label sheet
- Parent’s guide
One sign bracket
One sign
5
5
5
GETTING STARTED
Battery Removal and Installation
1. Make sure the Race Car is turned Off.
2. Find the battery cover located on
the bottom of the unit and use a
screwdriver to loosen the screw and
open the battery cover.
3. Remove old batteries by pulling up
on one end of each battery.
4. Install 2 new AAA (AM-4/LR03)
batteries following the diagram inside
the battery box.
5. Replace the battery cover and tighten
the screw to secure.
BATTERY NOTICE
• Usenewalkalinebatteriesformaximumperformance.
• Useonlybatteriesofthesameorequivalenttypeasrecommended.
• Donotmixdifferenttypesofbatteries:alkaline,standard(carbon-
zinc) or rechargeable, or new and used batteries.
• Donotusedamagedbatteries.
• Insertbatterieswiththecorrectpolarity(+and-).
• Donotshort-circuitthebatteryterminals.
• Removeexhaustedbatteriesfromthetoy.
• Removebatteriesduringlongperiodsofnon-use.
• Donotdisposeofbatteriesinfire.
• Donotchargenon-rechargeablebatteries.
• Remove rechargeable batteries from the toy before charging (if
removable).
Rechargeable batteries are only to be charged under adult
supervision.
6
6
6
MISE EN GARDE
Utiliser des piles alcalines neuves pour des performances
maximales.
• Seulesdespilesdutyperecommandédoiventêtreutilisées.
• Ne pas mélanger différents types de piles ou d’accumulateurs,
ne pas mélanger des piles ou des accumulateurs neufs avec des
usagés.
• Nepasutiliserdespilesoudesaccumulateursendommagés.
• Mettreenplacelespilesoulesaccumulateursenrespectantles
polarités+et–.
• Nepasmettrelesbornesd’unepileoud’unaccumulateurencourt-
circuit(enreliantdirectementle+etle–).
• Enleverlespilesoulesaccumulateursusagésdujouet.
• Retirer les piles ou les accumulateurs en cas de nonutilisation
prolongée.
• Nelesjeterniaufeunidanslanature.
• Nepastenterderechargerdespilesnonrechargeables.
• Enleverlesaccumulateursdujouetpourlesrecharger.
• Lesaccumulateursnedoiventêtrechargésquesouslasurveillance
d’un adulte.
7
7
7
LABEL APPLICATION
Please stick the labels to the playset securely as
indicated below:
9
3
9
4
8
9 9 10
11 12
13
13
14
15
16
17
18
19
19
8
12
7
16
17
18
2
13 10
13
11
14
5
6
15
1a
1b
1a 1b
8
8
8
ASSEMBLY INSTRUCTIONS
360° Loop Track
With the Go! Go! Smart Wheels® Revved Up Stunt Spiral, safety
comes first. Adult assembly required. For your child’s safety, do not
let them play with this toy until it is fully assembled.
1. Insert the Launcher Part A into the Launcher Part B.
2. Insert the assembled Launcher onto the Launcher Base.
3. Insert the Handle Pedestal onto the track.
9
9
9
4. Insert the Rotator into the Handle Pedestal.
5. Insert the Handle into the Handle Pedestal.
6. Connect the Uphill Ramp Track with the Downhill RampTrack
as shown below.
7. Insert the Arc Track into the slot on both the Uphill Ramp Track
and the Downhill Ramp Track.
10
10
10
8. Snap the assembled pieces to the front of the track.
9. Connect 1/4 Tracks A and B.
10. Snap the assembled pieces to the end of the ramp track.
11. Add Sign Bracket and Sign to end of track.
11
11
11
12. Assembled 360° loop track will look like the image below.
Hilly Track
The super launcher is only used in the 360° loop configuration.
1. Repeat steps 1- 5 as shown above.
2. Insert the Arc Track into the slot on both the Uphill Ramp Track
and the Downhill Ramp Track.
3. Connect assembled launcher to front of the hill assembly.
12
12
12
4. Snap 1/4 Track A to the end of the track.
5. Assembled hilly track will look like the image below.
EXPAND & EXPLORE
Connect to the Go! Go! Smart Wheels® 3-in-1 Raceway (as
shown below) and other Go! Go! Smart Wheels® playsets (each
sold separately) to expand the Revved Up Stunt SpiralTM and
inspire creativity
.
13
13
13
PRODUCT FEATURES
Race Car
1. On/Off Switch
To turn the Race Car On, slide the
On/Off Switch to the On position.
To turn the Race Car Off, slide the
On/Off Switch to the Off position.
2. Automatic Shut-Off
To preserve battery life, the included Race Car will automatically
shut down after approximately 60 seconds without input. The unit
can be turned on again by pressing the light-up button, pushing
the car quickly, or triggering a SmartPoint® location.
NOTE
If the unit powers down while playing, we suggest changing the batteries.
ACTIVITIES
Race Car
1. Slide the On/Off Switch to turn the
Race Car On. You will hear a song,
phrase and sounds. The light will
flash with the sounds.
14
14
14
2. Press the Light-Up Face Button to
hear sounds, songs, phrases and
melodies. The light will flash with
sounds.
3. Press the Action Button on the
vehicle to activate a mechanical
function and hear fun sounds. The
light will flash with the sounds.
4. Push the Race Car to hear fun
sounds. While a melody is playing,
push the Race Car again to add in
fun sounds on top of the melody. The
light will flash with the sounds.
5. For added fun, the Race Car interacts with the Go! Go! Smart
Wheels® Revved Up Stunt Spiral. Simply place the Race Car
on the SmartPoint® location to see the Race Car’s light flash
and to hear fun sounds, short tunes and phrases. The Race Car
interacts with other Go! Go! Smart Wheels® playsets (each
playset sold separately).
15
15
15
PRODUCT FEATURES - 360° TRACK
1. Place the Race Car or any SmartPoint® vehicle (each sold
separately) on the SmartPoint® location to trigger fun sounds,
songs or phrases.
2. Put the Race Car on the SmartPoint® Launcher. Press down
firmly on the launcher lever to send the Race Car out and around
the loop!
16
16
16
SONGS
SONG 1
All around the track we go,
zoomin’, drivin’, racin’,
Just before the finish line,
<Vroom> goes my engine!
SONG 2
I’m a race car,
the fastest ever seen.
I loop-de-loop and jump through hoops
and floor it in between.
SONG 3
Go! Go! Smart Wheels
Go! Go! Smart Wheels
I’m a Go! Go! Smart Wheels race car
Ready to give it some gas (Go! Go!)
I’m gonna find out if I’m fastest.
Let’s Go! Go! and see (Go! Go!)
SONG 4
Go! Go! Smart Wheels
Go! Go! Smart Wheels
MELODY LIST
Three Blind Mice
To Market, To Market
William Tell Overture
DoYourEarsHangLow?
God Save the Queen
Itsy, Bitsy Spider
17
17
17
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2.
Keep the unit out of direct sunlight and away from any direct heat
sources.
3. Remove the batteries if the unit will not be in use for an extended
period of time.
4. Donotdroptheunitonhardsurfacesanddonotexposetheunit
to moisture or water.
TROUBLESHOOTING
If for some reason the unit stops working or malfunctions, please follow
thesesteps:
1. Please turn the unit Off.
2. Interrupt the power supply by removing the batteries.
3. Let the unit sit for a few minutes, then replace the batteries.
4. Turn the unit On. The unit should now be ready to play again.
5. If the product still does not work, replace with an entire set of new
batteries.
18
18
18
IMPORTANT NOTE:
If the problem persists, please call our Consumer Services
Department at 1-800-521-2010 in the U.S., 1-877-352-8697 in
Canada, or visit our website vtechkids.com and fill out our Contact
Us form located under the Customer Support link. Creating and
developing VTech products is accompanied by a responsibility that
we at VTech take very seriously. We make every effort to ensure the
accuracy of the information, which forms the value of our products.
However,errorssometimescanoccur.Itisimportantforyoutoknow
that we stand behind our products and encourage you to contact
us with any problems and/or suggestions that you might have. A
service representative will be happy to help you.
CAUTION
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate
the equipment.
NOTE
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
moreofthefollowingmeasures:
19
19
19
• Reorientorrelocatethereceivingantenna.
• Increasetheseparationbetweentheequipmentandreceiver.
• Connecttheequipmentintoanoutletonacircuitdifferentfromthat
to which the receiver is connected.
• Consultthedealeroranexperiencedradio/TVtechnicianforhelp.
Supplier’s Declaration of Conformity
47 CFR § 2.1077 Compliance Information
TradeName: VTech®
Model: 5349
ProductName: Go!Go!SmartWheels® Revved Up
Stunt SpiralTM
ResponsibleParty: VTechElectronicsNorthAmerica,LLC
Address: 1156W.ShureDrive,Suite200,
 ArlingtonHeights,IL60004
Website: vtechkids.com
THIS DEVICE COMPLIESWITH PART 15 OFTHE FCC
RULES. OPERATION IS SUBJECTTOTHE FOLLOWINGTWO
CONDITIONS: (1)THIS DEVICE MAY NOT CAUSE HARMFUL
INTERFERENCE, AND (2)THIS DEVICE MUST ACCEPT ANY
INTERFERENCERECEIVED,INCLUDINGINTERFERENCETHAT
MAYCAUSEUNDESIREDOPERATION.
CAN ICES-3 (B)/NMB-3(B)
TM & © 2019 VTech Holdings Limited.
All rights reserved.
Printed in China.
Visit our website for more
information about our products,
downloads, resources and more.
vtechkids.com
Read our complete warranty policy online at
vtechkids.com/warranty
US
91-003783-008
CA
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20

VTech Go! Go! Smart Wheels® Revved Up Stunt Spiral™ Le manuel du propriétaire

Catégorie
Jouets
Taper
Le manuel du propriétaire