Yard Machines Snow Fox Le manuel du propriétaire

Taper
Le manuel du propriétaire

Ce manuel convient également à

Operator's Manual
Snow Fox
Electric
Snow Thrower
MTD
®
IMPORTANT: Read safety rules and instructions carefully before operating equipment.
PART NO. 769-02507 (9/06)
THANK YOU
Thank you for buying this quality product. This modern
outdoor power tool will provide many hours of useful
service. You will find it to be a great labor-saving device.
This operator's manual provides you with easy-to-
understand operating instructions. Read the whole
manual and follow all the instructions to keep your new
outdoor power tool in top operating condition.
PRODUCT REFERENCES, ILLUSTRATIONS AND
SPECIFICATIONS
All information, illustrations, and specifications in this
manual are based on the latest product information
available at the time of printing. We reserve the right to
make changes at any time without notice.
Copyright@ 2006 MTD SOUTHWEST INC, All Rights
Reserved.
TABLE OF CONTENTS
Service Information ......................... 2
Rules for Safe Operation ..................... 3
Know Your Unit ............................ 7
Assembly Instructions ....................... 8
Operating Instructions ....................... 9
Maintenance and Repair Instructions ........... 11
Cleaning and Storage ....................... 12
Troubleshooting Chart ...................... 13
Specifications ............................. 13
Parts List ............................... $14
Warranty Information .......... Inside Back Cover
SERVICE INFORMATION
Service on this unit both within and after the warranty
period should be performed only by an authorized and
approved service dealer.
For service call 1-800-800-7310, or 1-800-668-1238 in
Canada to obtain a list of authorized service dealers near
you. For more details about your unit, visit our website at
www.yardmachines.com.
If you have difficulty assembling this product or have
any questions regarding the controls, operation or
maintenance of this unit, please call the Customer
Support Department.
Before beginning, locate the unit's model plate. It lists
the model and serial numbers of your unit. Refer to the
sample plate below and copy the information for future
reference.
Model Number
Serial_mber --_ ParentPartNumber
\MODEL: /
S/N : ITEM : /
DO NOT RETURN THE UNIT TO THE RETAILER.
PROOF OF PURCHASE WILL BE REQUIRED FOR
WARRANTY SERVICE.
Copy the model and parent
part number here:
Copy the serial number
here:
Make sure you carefully read and understand this manual before starting or operating this equipment.
THIS PRODUCT IS COVERED BY ONE OR MORE U.S. PATENTS. OTHER PATENTS PENDING.
SYMBOL MEANING
The purpose of safety symbols is to attract your
attention to possible dangers. The safety symbols,
and their explanations, deserve your careful attention
and understanding. The safety warnings do not by
themselves eliminate any danger. The instructions or
warnings they give are not substitutes for proper
accident prevention measures.
SYMBOL MEANING
,_ SAFETY ALERT: Indicates danger, warning or
caution. Attention is required in order to avoid
serious personal injury. May be used in conjunction
with other symbols or pictographs.
I
DANGER: Failure to obey a safety warning will
result in serious injury to yourself or to others.
Always follow the safety precautions to reduce the
risk of fire, electric shock and personal injury.
WARNING: Failure to obey a safety warning can
result in injury to yourself and others. Always follow
the safety precautions to reduce the risk of fire,
electric shock and personal injury.
I
NOTE: Advises you of information or instructions vital to
the operation or maintenance of the equipment.
CAUTION: Failure to obey a safety warning may
result in property damage or personal injury to
yourself or to others. Always follow the safety
precautions to reduce the risk of fire, electric shock
and personal injury.
Read the Operator's Manual and follow all warnings and safety instructions. Failure to do so can result in
serious injury to the operator and/or bystanders.
FOR QUESTIONS, CALL 1-800-800-7310 IN U.S. OR 1-800-668-1238 in CANADA
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS
When using the unit,
WAI_IIIIIi[IIIIIICI: you must followthe
safety rules. Please read these instructions
before operating the unit in order to ensure
the safety of the operator and any bystanders.
Please keep these instructions for later use.
Before Operating
Read the instructions carefully. Be familiar with the
controls and proper use of the unit.
Do not operate this unit when tired, ill or under the
influence of alcohol, drugs or medication.
Children under the age of 15 must not use the unit;
teens may operate ttie unit with adult guidance.
Inspect the unit before use. Replace damaged parts.
Make sure all fasteners are in place and secure.
Replace snow thrower parts that are cracked,
chipped, or damaged in any way.
Exercise caution to avoid slipping or falling.
Thoroughly inspect the area where the snow thrower is
to be used. Remove all doormats, sleds, boards, wires,
debris, and other foreign objects which may be thrown
by the snow thrower.
Make sure the rotor will spin freely before using the
unit.
Dress properly. Wear adequate winter outer garments.
Wear heavy, long pants, boots, gloves and a long sleeve
shirt. Do not wear loose clothing, jewelry, short pants,
sandals or go barefoot. Secure hair above shoulder level.
Wear footware that doesn't leak when operating the
snow thrower and that will improve footing on slippery
surfaces. Wear rubber boots.
Never attempt to make adjustments while the motor is
running.
Let the motor and unit adjust to outdoor temperatures
before starting to clear snow.
Always wear safety glasses/shields or goggles at all
times during operation or while performing an
adjustment or repair to protect eyes from foreign
objects that may be thrown from the machine.
SAFETY WARNINGS FOR ELECTRIC UNITS
DANGER: When using electric machines, basic
safety precautions should always be followed to reduce
the risk of fire, electric shock and personal injury.
Carefully read and understand the entire operator's
manual before using your unit. Pay close attention to
the operating instructions and safety warnings.
This snow thrower should be grounded while in use to
protect the operator from electric shock. The snow
thrower is equipped with an approved 3-conductor
cord and 3-prong grounding-type plug to fit the proper
grounding-type receptacle. The green or green/yellow
conductor in the cord is the grounding wire. Never
connect this wire to a live terminal. If your unit is for
use on less than 150 volts, it has a plug that looks like
A in the figure below. If it is for use on 150 to 250
volts, it has a plug that looks like D in the figure.
_ A_ Metal
Gro Screw _Sl_ j
Pin
Grounding Grounding D
Means Pin
An adapter (show in B and C in the above figure) is
available for connecting 3-prong grounding-type plugs
to 2-prong receptacles. The grounding means
extending from the adapter must be connected to a
permanent ground such as a properly-grounded outlet
box. No adapter is available for the plug shown in D.
Use only 3-wire outdoor extension cords that have 3-
prong grounding-type plugs and 3-pole receptacles
that accept the snow thrower's plug. Replace or repair
damaged cords.
MINIMUM WIRE SIZE FOR EXTENSION CORDS FOR
120 VOLT APPLIANCES USING 0-12 AMPS
Cord length (ft.) 25 50 100 150
Wire size (AWG) 16 16 14 14
CORD SETS: Please see your dealer for the
appropriated extension cord to use with this product.
Make sure your cord set is in good condition, with a
cord that is heavy enough to carry the current that
your unit will draw. An undersizedcord set will cause a
drop in line voltage resulting in a loss of power, as well
as overheating. The table shown above illustrates the
correct size to use depending on the cord length and
nameplate amperage rating. If in doubt, use the next
heavier size line gauge. The smaller the gauge
number, the heavier the cord. To prevent the cord
from disconnecting from the unit, use the cord hook
shown in the Operating Instructions.
I WARNING: To reduce therisk of electrical I
I
shock, use onlySW-A,SOW-A, STOW-A,SJW-A,
I
SJOW-A,SJTW-Aor SJTOW-Acord types.
Ground Fault Circuit Interrupter (GFCI) protection
should be provided on the circuit(s) or outlet(s) that will
be used for the unit. Use receptacles with built-in
GFCI protection for an extra measure of safety.
° A data plate on your unit indicates the voltage used.
Never connect the unit to an AC voltage that differs
from this voltage.
I WARNING: To preventelectric shock, use only I
with anextension cord suitable for outdoor use.
I
Inspect all extension cords and the unit power
connection periodically. Look closely for deterioration,
cuts or cracks in the insulation. Also inspect the
connections for damage. Repair or replace the cords if
any defects appear.
When cleaning, inspecting or repairing the unit, make
certain the rotor and all moving parts have stopped.
Disconnect the extension cord to prevent accidental
starting.
Do not abuse the extension cord. Never carry the
snow thrower by the cord or yank on the cord to
disconnect it from the receptacle.
Keep the extension cord away from heat, oil, and
sharp edges to prevent damage.
If the extension cord is damaged in any manner while
it is plugged in, pull the extension cord from the wall
receptacle.
Prevent any possible disconnection of the cord
receptacle from the extension cord during operation
by using the cord retainer and guide bar. Refer to the
section Using the Cord Retainer.
Avoid accidental starting. Don't carry a plugged-in
snow thrower with your finger on the switch. Be sure
switch is off when plugging in the unit.
Always unplug the unit and allow it to cool before
putting it into storage. Store indoors.
Always unplug the unit when not in use, and before
performing any maintenance or repairs.
WHILE OPERATING
Walk, never run.
Be sure the snow thrower is not in contact with
anything before starting the unit.
Stay away from the discharge opening at all times.
Keep face, hands, and feet away from concealed
moving or rotating parts.
Be attentive when using the snow thrower, and stay
alert for holes in the terrain and other hidden hazards
or traffic.
° Do not use on a gravel surface or crushed rock
surfaces. Use extreme caution when crossing
gravel/crushed rock drives, walks, or roads.
° Clear snow from slopes by going up and down. Never
go across the slope. Use caution when changing
directions. Never clear snow from steep slopes.
° Never attempt to use the snow thrower on a roof or
any steep, inclined, slippery surfaces.
° Never operate snow thrower without proper guards,
plates or other safety protective devices in place.
° Never operate the snow thrower near glass
enclosures, automobiles, trucks, window wells,
dropoffs, etc. without proper adjustment of the snow
discharge angle. Keep children and pets away.
° Don't force or overload the snow thrower. The snow
thrower will perform at its best and safest when it is
run at the rate for which it was designed.
Never operate the machine at high speeds on slippery
surfaces. Look behind and use care when backing up.
Never direct discharge towards people or allow anyone
in front of the unit while operating.
Wear safety glasses or goggles that are marked as
meeting ANSI Z87.1 standards, and ear/hearing
protection when operating this unit.
Use the unit only in daylight or good artificial light.
° Avoid accidental starting. Remain in the starting
position whenever starting the unit. The operator and
unit must be in a stable position while starting. See
Starting/Stopping Instructions.
Use the right tool. Only use this tool for the purpose
intended.
Do not overreach. Always keep proper footing and
balance.
° Always hold the unit with both hands when operating.
Keep a firm grip on handles or grips.
Keep hands, face, and feet at a distance from all
moving parts. Do not touch or try to stop the rotor
when it is rotating.
If the rotor will not rotate freely due to frozen ice, thaw
the unit thoroughly before attempting to operate it
under power.
Keep the rotor clear of debris.
Never attempt to clear the rotor with the motor
running. Turn the motor off first and unplug the
extension cord.
Keep clothing and body parts away from the rotor.
Do not operate the motor faster than the speed
needed. Do not run the motor at high speed when not
clearing snow.
° Always stop the motor when clearing snow is delayed
or when walking from one location to another.
Disengage power to the rotor when snow thrower is
transported or not in use.
After striking a foreign object, turn the unit off and
inspect the snow thrower for damage. Unplug the
unit. Repair damage before restarting and operating
the unit.
° If the unit should start to vibrate abnormally, stop the
unit and check immediately for the cause. Vibration is
generally a warning of trouble.
Stop the motor and unplug the unit whenever you
leave the operating position, before unclogging the
rotor or discharge vanes, and when making any
repairs, adjustments, or inspections.
Never discharge snow onto public roads or near
moving traffic.
Let the snow thrower run for a few minutes after
clearing snow so moving parts do not freeze.
Use only original equipment manufacturer
replacement parts and accessories for this unit. These
are available from your authorized service dealer. Use
of any unauthorized parts or accessories could lead to
serious injury to the user or damage to the unit, and
void your warranty.
Do not use the unit in the hand held position. Do not
pick up the unit when it is powered and running. The
unit is designed to travel along the ground.
OTHER SAFETY WARNINGS
Be sure to secure the unit while transporting.
Store the unit in a dry area, locked up or up high to
prevent unauthorized use or damage, out of the reach
of children.
Never douse or squirt the unit with water or any other
liquid. Keep handles dry, clean and free from debris.
Clean after each use, see Cleaning and Storage
instructions.
If the labels on the unit become defaced or start lifting
off, contact your authorized service dealer.
Keep these instructions. Refer to them often and use
them to instruct other users. If you loan someone this
unit, also loan them these instructions.
Maintain snow throwers with care. Follow instructions
for lubricating and changing accessories.
SAVE THESE INSTRUCTIONS
This operator's manual describes safety and international symbols and pictographs that may appear on this product.
Read the operator's manual for complete safety, assembly, operating and maintenance and repair information.
SYMBOL MEANING
SAFETY ALERT SYMBOL
Indicates danger, warning or caution.
May be used in conjunction with other
symbols or pictographs.
WARNING - READ
OPERATOR'S MANUAL
Read the operator's manual(s) and follow
all warnings and safety instructions.
Failureto do so can result in serious injury
to the operator and/or bystanders.
KEEP BYSTANDERS AWAY
WAR NING:Keep all
bystanders, especially children and
pets, at least 50 feet (15 m) from the
operating area.
SYMBOL MEANING
THROWN OBJECTS AND
ROTATING CUTTER CAN CAUSE
SEVERE INJURY
tA/Aril_ I I I_ I_
W/-_rt I_1111_11_.!1:Small objects can
be propelled at high speed, causing
injury. Keep away from the rotating
rotor.
SPINNING ROTOR CAN CAUSE
SEVERE INJURY
tA/Aril_ I I I_ I_
VV/-_nl_l I I_1_._. Ke_p hands, feet,
and clothing away from the discharge
area. Do not step in front of the unit, or
use hands to clean the rotor area.
KEEP HANDS AND FEET AWAY
APPLICATIONS
As a snow thrower:
Clears snow from walkways, driveways, sidewalks,
pathways and more
Starter
Button
Overload
Protection
Switch
Front Handle
Discharge
Directional
Control
/
/
/
/
/
/
/
/
Cord
Retainer
Cord Outlet
Receptacle
Bail
\
Handlebar
Cord Guide
Bar
Handlebar
Knob
Vanes
Wheels
Rotor
Belt Case Cover
Flange Lock Nut
Cover
Screws (7)
Scraper
ASSEMBLING THE HANDLEBARS
Before you can operate the unit, you must install the
handlebars.
1. When you unpack the unit, loosen and remove the
two knobs and washers from the inside of the lower
bars (Fig. 1).
2. Hold the handle bar in the position shown in Figure 1
and slide it onto the lower bars making sure that the
ends of the handlebar are on the inside of the lower
bars.
3. Align the holes in the handlebar with the holes in the
lower bars and insert the bolts through those holes.
4. Check to make sure the bail is assembled into switch
assembly (Fig. 1).
NOTE: Take care not to pinch the switch cable when
positioning the handlebars.
5. Place the washers on the bolts, then screw the two
knobs onto them.
6. Tighten the knobs to secure the handlebars in place.
NOTE: Do not over-tighten the knobs.
7. Clip the switch cable to the cable restraint on the
lower bar as shown in the inset of Figure 1.
8. Remove the banding once the upper handle is
assembled to the lower handle (Fig. 1).
USING THE CORD RETAINER
There is an extension cord retainer to prevent the
extension cord from disconnecting during use. The
retainer hangs from the cord guide bar.
NOTE: Do not plug the extension cord into the power
source receptacle until the cord is connected to
the cord retainer and plugged into the unit.
To use the cord retainer:
.
2.
3.
Fold the extension cord in half, forming a tight loop
near the receptacle.
Push the loop through the bottom hole in the retainer
(Fig. 2).
Slide the loop over the retaining clip and pull down
until the cord fits snugly (Fig. 2).
NOTE: Use a UL-approved extension cord. A 100-foot,
14-gauge cord is recommended. A 50-foot, 16-
gauge cord is acceptable.
Both the cord retainer and guide bar restrain the
extension cord and keep it out of the way at all times,
safely to the side of the operator.
The extension cord and retainer will slide on the guide
bar as the unit is moved to the left and right. Connect
your extension cord to the unit as shown in Figure 3.
/
Fig. 1
Fig. 2
Fig. 3
Banding
Cord
Guide Bar
STARTING INSTRUCTIONS
WARNING: Avoid accidental starting. Make sure
you are in the starting position when using the
snow thrower. To avoid serious injury, the operator
and unit must be in a stable position while starting.
You must follow this sequence correctly to start the unit.
1. Make sure you have plugged in the unit.
2. Press in and hold the red starter button (Fig. 4).
3. While holding the starter button, lift and hold the bail.
NOTE: The unit will NOT start if you fail to press and
hold the starter button until you lift the bail.
4. Hold the bail and begin operating the unit (Fig. 5).
STOPPING INSTRUCTIONS
1. Release your hand from the bail.
2. The starter button will pop out and the unit will stop.
Bail
/
/
/
/
/
/
/
Overload
Protection
Switch
Starter
Button
Fig. 4
Fig. 5
OVERLOAD PROTECTION SWITCH
This unit is equipped with an overload protection switch
to protect the circuit (that the unit is plugged into) from
short circuit overloads.
If the switch pops out:
1. Release the bail and allow the unit to stop and cool
for a minute.
2. Press the overload switch to reset. Resume
operation (Fig. 4).
If the switch pops again shortly after the first time:
1. Allow the unit to cool for 15 to 30 minutes.
2. After the unit has cooled, press the overload switch
to reset. Resume operation.
If the switch does not stay in, or if it continues to pop out
during operation, take the unit to an authorized service
dealer for repair.
OPERATING THE UNIT
1. Start the unit according to the Starting Instructions.
The depth and weight of the snow governs the
forward speed.
2. Push the unit so that it rides on the wheels and
scraper.
3. Make sure the power cord is attached to the cord
retainer and rests on the guide bar. The power cord
should trail to the side of the operator.
Discharge Direction Adjustment
Snow may be discharged to the left, straight forward, or
to the right of the operator.
To change the direction, use the following instructions:
1. Release the bail to stop the rotor.
2. Firmly grasp the discharge directional control handle
and pull it up. This releases the spring-loaded rod
from the discharge direction slot and allows free
movement (Fig. 6)
3. Turn the discharge directional control to the left, the
center or the right, depending on which direction you
want to throw the snow (Fig. 7).
NOTE: From the center position, the discharge directional
control turns approximately 45 degrees in either
direction (left or right). Do not force it.
4. Release the discharge directional control so it fits
into the slot to secure the desired position.
NOTE: Make sure the discharge directional control is
securely positioned in direction slot and cannot
rotate freely.
5. Restart the unit according to the Starting Instructions.
\
\
Pull the Discharge
Directional Control
Upwards
/_
#
Top View
45°
Discharge snow to
LEFT of operator
Discharge snow
in FRONT
45°
,/
Discharge snow to
RIGHT of operator
Fig. 7
Tips for Best Snow Throwing Results
For the most efficient snow throwing, keep the vanes
parallel and throw snow downwind.
Slightly overlap each swath you make (Fig. 8).
/
/
Fig. 6
Fig. 8
10
SERVICING THE UNIT
Extreme care and knowledge of the system is required when
servicing this unit. Service should be performed by qualified
service personnel only. Replacement parts for this unit must be
identical to the parts they replace. Refer any repair to an
authorized service dealer.
INSPECTING/REPLACING THE DRIVE BELT
When servicing the unit, use only original equipment
manufacturer replacement parts. Inspect the drive belt once a
year or every 50 hours of operation, whichever comes first, for
wear. If the drive belt needs to be replaced, use the following
instructions.
I_lb WARNING: To avoid serious personal injury,
turn off the unit and allow it to cool. Unplug the
unit before you perform any maintenance.
I
1,
2.
Remove the flange lock nut from the belt case cover with a
wrench or nut driver (Fig. 9).
Remove the seven (7) screws from the belt case cover
using a #T20 Torx bit or flat blade screwdriver (Fig. 9).
I_ WARNING: To reduce the risk of electrical
shock, replace the cover before connecting the
unit to a power source.
I
Cover
Screws (7)
Belt Tensioner
(Idler Arm)
/
/
/
/
/
/
Driven
Pulley
Fig. 10
5. Reinstall the cover with the seven (7)screws. To make
installation easier, place the narrow part of the cover into
the recess of the housing. Install the top two screws, then
push the rest of the cover down into the recess and over
the rotor shaft (Fig. 10a). Torque all seven (7) screws to 18-
23 inolb (2.0-2.5 Nom).
6. Reinstall the flange lock nut. Torque the nut to
80-100 inolb (9.0-11.2 Nom).
NOTE: If the flange lock nut is damaged, do not replace it with
a standard nut. Replace only with an original
equipment manufacturer replacement part.
Drive Pulley
Belt Tensioner
Belt
Drive Belt
Retainer
Flange Lock Nut
Fig. 9
3. Pull the belt tensioner (idler arm) away from the drive
pulley. Remove the damaged or broken belt from the
driven pulley and drive pulley inside of the housing.
Discard appropriately (Fig. 10).
4. Loop the new belt around the drive pulley and driven
pulley (Fig. 10). Pull the belt tensioner (idler arm) away
from the drive pulley to install the belt around the drive
pulley.
NOTE: Make sure the washer is still in place on the driven
pulley shaft prior to reinstalling the belt case cover.
Driven
Pulley
Rotor
Shaft
Fig. 10a
WARNING: When refitting the belt back into the
main housing, be sure that the belt is to the right of
the Drive Belt Retainer. If the belt is placed to the
left, serious damage may occur.
11
REPLACING THE SCRAPER CLEANING
I_ ARNING: To avoid serious personal injury,
always turn your unit off and unplug it before you
perform maintenance.
Use only original equipment manufacturer replacement
parts.
1. Place the unit on the ground or on a work bench.
Position the unit so the vanes and rotor are facing up.
2. Beneath the rotor, locate the three (3)screws securing
the scraper to the housing. Remove them using a
#T20 Torx bit or flat blade screwdriver (Fig. 11).
3. Remove the scraper and discard it appropriately.
4. The new scraper will snap into place. Once in place,
attach it to the unit by reinstalling the three (3)
screws.
Torque the screws to:
25-30 in°lb (2.8-3.3 N°m).
I I ARNING: To avoid serious personal injury, I
always turn your unit off and unplug it before you
clean or service it.
Use a small brush to clean off the outside of the unit. Do
not use strong detergents. Household cleaners that
contain aromatic oils such as pine and lemon, and
solvents such as kerosene, can damage plastic housing
or handle. Wipe off any moisture with a soft cloth.
TRANSPORTING
Allow the motor to cool before transporting.
Secure the unit while transporting.
To move the unit, grasp it by the top and middle front
handles (Fig. 12).
If you are transporting the unit with the handles folded,
be careful not to make contact and accidentally bend
the discharge directional control (Fig. 6). If you bend or
damage the control, you can no longer adjust the
vanes.
Scraper
Fig. 11
STORAGE
° Allow the motor to cool before storing.
Store the unit locked up to prevent unauthorized use
or damage.
Store the unit in a dry, well-ventilated area.
Store the unit out of the reach of children.
Fig. 12
12
CAUSE
Unitisunplugged
Starterbuttonorbailwereimproperlyused
Overloadprotectionswitchhaspoppedout
CAUSE
Beltisdamaged
CAUSE
Scraperisworn
ACTION
Checkcordtomakesureitispluggedintoanelectricaloutlet
Pressinstarterbutton,holdit,andholdbail
PushitinandfollowtheStarting Instructions
ACTION
Replace the belt, according to Inspecting/Replacing the
Driver Belt
ACTION
Replace the scraper
If further assistance is required, contact your authorized service dealer
Motor type ............................................................................................................................................................... A.C.,120 Volts Electric
Operating RPM .............................................................................................................................................................. up to 14,000 rpm
Ignition Switch ...................................................................................................................................................... Bail Lock Safety Button
Amperage .................................................................................................................................................................................... 8.5 amps
Overload Protection ................................................................................................................................................. 120V, 15 amp Breaker
Handles .................................................................................................................................................................................... Steel Tube
Approximate Unit Weight ..................................................................................................................................................... 20 Ibs. (9 kg.)
Snow Depth (maximum) ........................................................................................................................................ 6 inches (0.152 meters)
Cleared Path Width ............................................................................................................................................. 12 inches (0.318 meters)
*All specifications are based on the latest product information available at the time of printing. We reserve the right to make changes
at any time without notice.
13
MANUFACTURER'S LIMITED WARRANTY FOR:
®
The limited warranty set forth below is given by MTD
LLC ("MTD") with respect to new merchandise purchased and
used in the United States, its possessions and territories.
MTD warrants this product against defects in material and
workmanship for a period of two (2) years commencing on the
date of original purchase and will, at its option, repair or
replace, free of charge, any part found to be defective in
material or workmanship. This limited warranty shall only apply
if this product has been operated and maintained in
accordance with the Operator's Manual furnished with the
product, and has not been subject to misuse, abuse,
commercial use, neglect, accident, improper maintenance,
alteration, vandalism, theft, fire, water or damage because of
other peril or natural disaster. Damage resulting from the
installation or use of any accessory or attachment not
approved by MTD for use with the product(s) covered by this
manual will void your warranty as to any resulting damage. This
warranty is limited to ninety (90) days from the date of original
retail purchase for any MTD product that is used for rental or
commercial purposes, or any other income-producing purpose.
HOW TO OBTAIN SERVICE: Warranty service is available,
WITH PROOF OF PURCHASE THROUGH YOUR LOCAL
AUTHORIZED SERVICE DEALER. To locate the dealer in your
area, please check for a listing in the Yellow Pages or contact
the Customer Service Department of MTD LLC by calling
1-800-800-7310 or writing to P.O. Box 361131, Cleveland
OH 44136-0019 or if in Canada call 1-800-668-1238. No
product returned directly to the factory will be accepted unless
prior written permission has been extended by the Customer
Service Department of MTD LLC.
This limited warranty does not provide coverage in the
following cases:
A. Tune-ups - Spark Plugs, Carburetor Adjustments, Filters.
B. Wear items - Bump Knobs, Outer Spools, Cutting Line,
Inner Reels, Starter Pulley, Starter Ropes, Drive Belts.
C. MTD does not extend any warranty for products sold or
exported outside of the United States of America, its
possessions and territories, except those sold through
MTD's authorized channels of export distribution.
MTD reserves the right to change or improve the design of
any MTD Product without assuming any obligation to modify
any product previously manufactured.
No implied warranty, including any implied warranty of
merchantability or fitness for a particular purpose,
applies after the applicable period of express written
warranty above as to the parts as identified. No other
express warranty or guaranty, whether written or oral,
except as mentioned above, given by any person or
entity, including a dealer or retailer, with respect to any
product shall bind MTD. During the period of the
Warranty, the exclusive remedy is repair or replacement
of the product as set forth above. (Some states do not
allow limitations on how long an implied warranty lasts, so
the above limitation may not apply to you.)
The provisions as set forth in this Warranty provide the
sole and exclusive remedy arising from the sales. MTD
shall not be liable for incidental or consequential loss or
damages including, without limitation, expenses incurred
for substitute or replacement lawn care services, for
transportation or for related expenses, or for rental
expenses to temporarily replace a warranted product.
(Some states do not allow limitations on how long an implied
warranty lasts, so the above limitation may not apply to you.)
In no event shall recovery of any kind be greater than the
amount of the purchase price of the product sold. Alteration
of the safety features of the product shall void this Warranty.
You assume the risk and liability for loss, damage, or injury
to you and your property and/or to others and their property
arising out of the use or misuse or inability to use the
product.
This limited warranty shall not extend to anyone other than
the original purchaser, original lessee or the person for whom
it was purchased as a gift.
How State Law Relates to this Warranty: This warranty
gives you specific legal rights, and you may also have other
rights which vary from state to state.
To locate your nearest service dealer dial 1-800-800-7310
in the United States or 1-800-668-1238 in Canada.
MTD LLC
P.O. Box 361131
Cleveland, OH 44136-0019
14
Manuel de I'utilisateur
Snow Fox
Chasse-neige
I_lectrique
MTD
®
IMPORTANT : lisez soigneusement les regles et consignes de securit6 avant de faire fonctionner cet equipement.
PART NO. 769-02507 (9/06)
TOUS NOS REMERCIEMENTS
Nous vous remercions d'avoir achete ce produit de
qualite. Cet outil mecanique de plein air moderne est
congu pour vous rendre service pendant Iongtemps. II
vous sauvera beaucoup de temps comme vous pourrez
vous en rendre compte. Ce manuel de I'utilisateur
comporte un mode d'emploi facile a comprendre. Prenez
soin de lire le manuel au complet et suivez toutes ses
instructions a la lettre afin de conserver votre nouvel outil
mecanique de plein air en excellent etat de
fonctionnement.
RI_FI_RENCES, ILLUSTRATIONS ET
SPECIFICATIONS RELATIVES AU PRODUlT
Toutes les informations, illustrations et specifications
contenues dans ce manuel tiennent compte des
dernieres informations techniques disponibles au
moment de mettre sous presse. Nous nous reservons le
droit d'y apporter des modifications a tout moment, sans
preavis.
Copyright@ 2006 MTD SOUTHWEST INC., Tous droits
reserves.
TABLE DES MATII_RES
Service technique .......................... F2
Consignes de s6curite ...................... F3
Familiarisez-vous avec votre appareil .......... F7
Instructions de montage .................... F8
Mode d'emploi ........................... F10
Entretien et reparations .................... F11
Nettoyage et entreposage .................. F12
Tableau de depannage ..................... F13
Caracteristiques .......................... F13
Liste des pieces .......................... S14
Garantie .......... Interieure de la Couverture Arriere
NFORMATIONS D'ENTRETIEN
Tout entretien effectue sur cet appareil pendant et apres
la periode de garantie doit 6tre fait par un concess-
ionnaire agre6 uniquement. Obtenez la liste des
concessionnaires agr6es appelez le 1-800-800-7310, ou
le 1-800-668-1238 au Canada. Pour de plus amples
informations apropos de votre appareil, visitez
www.yardmachines.com.
NE RETOURNEZ PAS L'APPAREIL AU DI_TAILLANT
CHEZ QUI VOUS L'AVEZ ACHETI_. TOUT SERVICE
SOUS GARANTIE NI_CESSITE UNE PREUVE D'ACHAT.
Avant d'assembler votre nouvel equipement, reperez la
plaque signaletique de I'appareil et copiez ses
informations dans I'espace ci-dessous. Ces informations
sont essentielles si vous desirez obtenir de I'aide aupres
de notre service technique ou d'un distributeur agr6e. Un
exemple de plaque signaletique est pr6sente ci-dessous.
Si vous eprouvez des difficultes a assembler ce produit
ou si vous avez des questions concernant les
commandes, le fonctionnement ou I'entretien de cet
appareil, veuillez communiquer avec notre service
technique.
Num6ro de module
Num6ro_ s6rie -1 Num6ro d_e
\MOOE,: /
S/N : ITEM : /
)i_ce m_re
Copiez le num6ro de
module / piece m_re ici :
Copiez le num6ro
de s6rie ici :
Prenez soin de lire et de bien comprendre ce manuel avant de demarrer ou de faire fonctionner cet equipement.
CE PRODUIT EST COUVERT PAR UN OU PLUSlEURS BREVETS AMI_RICAINS, ET D'AUTRES SONT EN INSTANCE.
F2
Les symboles de securit6 attirent votre attention sur
des dangers potentiels. Ces symboles et leurs details
explicatifs meritent que vous les lisiez et compreniez
bien. Les avertissements de securit6 ne peuvent eviter
les dangers de par eux-m_mes. Les consignes ou
mises en garde qu'ils donnent ne remplacent pas des
mesures preventives appropriees contre les accidents.
SYMBOLE SIGNIFICATION
ALERTE DE SECURITE: Indiqueundanger,un
avertissementou une miseen garde.Soyezvigilant
afind'eviter touteblessuregrave.Cesymbole peut
_trecombine a d'autressymboles ou pictogrammes.
SYMBOLE
SIGNIFICATION
DANGER: le non-respect d'un avertissement
peut causer dommages materiels ou blessures
graves pour tous. Respectez les consignes de
securit6 afin de reduire les risques d'incendie,
d'electrocution et de blessures.
I
REMARQUE: donne des informations ou des
instructions vitales pour le fonctionnement ou
I'entretien de I'equipement.
Lis.ez le(s).manuel(s) de. I'utilis.ateur et sqivez..tpus
les averus.sem, ents et. cons=gnes.ae .s.ecume.
vous pournez a aeTaut entramer aes olessures
graves pour vous ou d'autres personnes.
SI VOUS AVEZDES QUESTIONS, APPELEZ LE 1-800-
800-7310 AUX ETATS-UNIS, OU LE 1-800-668-1238 AU
CANADA
AVERTISSEMENT: le non-respect d'un
avertissement peut causer dommages materiels ou
blessures graves pour tous. Respectez les consignes
de s6curit6 afin de reduire les risques d'incendie,
d'electrocution et de blessures.
MISE EN GARDE: le non-respect d'un
avertissement peut causer dommages materiels ou
blessures graves pour tous. Respectez toujours les
consignes de securit6 afin de reduire les risques
d'incendie, d'electrocution et de blessures.
IMPORTANTES CONSIGNES DE SI CURITI
LIRE TOUTES LES INSTRUCTIONS
AVERTISSEMENT: asuivez soign- eusement
les consignes de securit6 Iorsque vous utilisez cet
appareil. Dans I'int6r_t de votre securit6 et de celle
des personnes & proximite, prenez soin de lire ces
instructions avant de faire fonctionner la machine.
Veuillez garder les instructions en lieu sQr pour un
usage ulterieur.
Avant L'utilisation
Veuillez life le manuel de I'utilisateur attentivement.
Familiarisez-vous avec les commandes et I'utilisation
correcte de I'appareil. Sachez comment arr_ter
I'appareil et desactiver les commandes rapidement.
N'utilisez pas I'appareil si vous _tes fatigue, malade ou
sous I'effet de I'alcool, de drogues ou de medicaments.
Les enfants et adolescents de moins de 15 ans ne
doivent pas utiliser I'appareil exceptes les adolescents
assistes d'un adulte.
Inspectez I'appareil avant utilisation. Remplacez les
pi_)ces endommagees. Assurez-vous que les fixations
sont solidement en place. Remplacez les pieces du
souffleuse a neige qui sont fendillees, ebr6ch6es ou
endommagees.
Faites preuve de prudence pour eviter de glisser ou
tomber.
Inspectez soigneusement la zone oO vous comptez
utiliser la souffleuse a neige. Retirez tousles paillassons,
trafneaux, planches, ills, debris et autres corps etrangers
qui pourraient _tre projetes par la souffleuse a neige.
Assurez-vous que le rotor peut tourner librement
avant de utilisez cet appareil.
Habillez-vous correctement. Portez des v_tements
d'hiver appropries pour le travail a I'exterieur. Portez
des pantalons epais et longs, des bottes, des gants et
une chemise a manches Iongues. Ne marchez pas
pieds nus et evitez v_tements I&ches, bijoux,
pantalons courts et sandales. Relevez les cheveux au-
dessus des epaules.
Portez des chaussures etanches qui assurent une
bonne prise sur les surfaces glissantes. Portez des
bottes en caoutchouc.
N'effectuez jamais de reglages pendant que le moteur
est en marche.
Laissez le moteur et la machine s'adapter a la
temperature exterieure avant de deblayer la neige.
Portez toujours des lunettes de s6curite en tout temps
durant I'utilisation de I'appareil, ou Iorsque vous
effectuez des operations de reglage ou de reparation,
afin de proteger les yeux des corps etrangers pouvant
_tre projetes par la machine.
F3
AVERTISSEMENTS DE SI_CURITI_ I_LECTRIQUE
AVERTISSEMENT: respectez toujours les
consignes de securit6 durant I'utilisation d'appareils
de electriques afin de reduire les risques d'incendie,
d'electrocution et de blessures. Prenez soin de bien
lire et comprendre tout le manuel de I'utilisateur
avant d'utiliser la souffleuse/aspirateur. Faites
particulierement attention au mode d'emploi et aux
avertissements de securit&
Ce chasse-neige devrait _tre raccorde a la terre Iors
de son utilisation pour eviter I'electrocution de
I'operateur. Le chasse-neige est equip6 d'un cordon &
3 conducteurs agre6 et d'une fiche de type terre &
trois ergots pour _tre branchee dans la prise terre
appropri& Le conducteur vert ou vert/jaune dans le
cordon est le fil de terre. Ne branchez jamais ce fil &
un terminal sous tension. Si votre machine est utilisee
avec du courant de moins de 150 volts, il possede une
fiche qui ressemble & A dans la figure ci-dessous. Si
elle est prevue pour _tre utilisee avec du courant 150
250, elle possede une fiche qui ressemble & D dans la
figure.
Piquet de Mise
la Lerre
Raccord
la Terre
Piquetde Mise
la Lerre
Un adaptateur (montre dans B et C sur la figure ci-
dessus) est disponible pour connecter les fiches de
terre & 3 ergots a des prises & 2 ergots. Le raccord & la
terre de I'adaptateur doit _tre branche & une prise de
terre permanente comme un boftier de sortie
convenablement mis & la terre. Aucun adaptateur n'est
disponible pour la fiche montree dans D.
N'utilisez que des rallonges & 3 fils qui ont des fiches
de type terre a 3 ergots et des prises & 3 p61es qui
acceptent la fiche du chasse-neige. Remplacez ou
reparez les cordons endommages.
N'utilisez pas de rallonges ayant souffert d'abus.
Netirez jamais la souffleuse a neige par son cordon et
ne la debranchez pas de la prise en tirant sur le cordon.
AVERTISSEMENT : Pour reduire le risque de
choc electrique, utilisez cordons de type SW-A,
SOW-A, STW-A, STOW-A, SJW-A, SJOW-A,
SJTW-W ou SJTOW.
CALIBRE MINIMUM DES RALLONGES ALIMENTANT DES
APPAREILS 120V, A COURANT DE CHARGE DE 0-12 AMPS
Long. decordon (pieds) 25 50 100 150
Calibreducordon (AWG) 16 16 14 14
JEUX DE CORDONS: Veuillez vous adresser a votre
concessionnaire pour voir quelle rallonge utiliser avec
ce produit. Verifiez que votre jeu de cordons est en bon
etat de fonctionnement. Si vous utilisez un jeu de
cordons, assurez vous de bien utiliser un cordon de
calibre suffisant pour laisser passer le courant de charge
de votre appareil. Un jeu de cordons a section trop faible
risque de provoquer des chutes de tension de ligne, qui
entraTnentune perte de puissance et une surchauffe. Le
tableau ci-dessous donne les calibres corrects a utiliser,
en fonction de la Iongueur du cordon et de la valeur de
I'intensite nominale. En cas de doute, utilisez la section
de c&ble immediate-ment superieure. Un numero de
calibre faible correspond a une forte section de c&ble.
Ref6rez vous a la Mode D'emploi pour reduire le risque
de debranchement du cordon de I'appareil pendant le
fonctionnement, du jeu de cordons.
Le(s) circuit(s) electrique(s) ou la(les) prise(s)
d'alimentation de cet outil de jardinage doit(doivent)
comp.orter une,protection de type GFCI (qui coupe le
circuit en cas ae a6Taut de terre). II existe aes prises
qui comportent une protection GFCI, et que I'on peut
utiliser dans ce cas de figure.
Votre appareil est pourvu d'une plaquette du
constructeur, qui indique le type de tension & utiliser.
N'alimentez jamais cet appareil avec une tension
alternative differente de celle affichee.
I VERTISSEMENT : Utilisez avec une rallonge I
prevue pour _tre utilisee & I'exterieur pour eviter
toute electrocution.
Procedez a une inspection periodique de vos rallonges
electriques et de la fiche de raccord de votre appareil.
Examinez plus particulierement I'isolation qui ne doit pas
presenter de traces de d6terioration, de coupures ou de
mise a nu. Inspectez egalement les raccords qui doivent
_tre en bon etat. Si les cordons paraissent endommages,
remplacez les ou reparez les.
Durant un nettoyage, une inspection ou une
reparation, assurez-vous que le rotor et les pieces
mobiles sont arr_tes. Debranchez la rallonge pour
emp_cher I'appareil de demarrer accidentellement.
Protegez la rallonge de la chaleur, de I'huile et des
bords tranchants pour eviter de I'endommager.
Si la rallonge est endommagee de guelque maniere
que ce soit alors qu'elle est branchee, deconnectez-la
de la prise.
I_vitez que la t_te d'entrafnement de la souffleuse &
neige ne se deconnecte de la rallonge en utilisant un
connecteur de retenue. Voir Retenue de Cordon
Prolongateur.
I_vitez tout demarrage accidentel. Ne transportez pas
I'appareil branche avec le doigt sur I'interrupteur.
Veillez & ce que I'interrupteur soit en position off
Iorsque vous branchez la machine.
Debranchez toujours I'appareil et laissez-le se refroidir
avant de le ranger. Rangez-le & I'interieur.
Debranchez toujours I'appareil Iorsqu'il n'est pas
utilise et avant de faire tout entretien ou reparation.
F4
PENDANT L'UTILISATION DE L'APPAREIL
Marchez, ne courrez jamais
° Avant de demarrer I'appareil, assurez-vous que le
Snow Buster ne touche aucun objet
° I_loignez-vous toujours de I'ouverture de la decharge
Gardez le visage, les mains et les pieds 61oignes des
pieces mobiles ou rotatives dissimulees
° Soyez attentif Iorsque vous utilisez la souffleuse
ne_ge,et faites attention aux trous sur le terrain ainsi
qu'aux dangers dissimules ou pouvant provenir de la
circulation
° N'utilisez pas I'appareil sur des surfaces recouvertes de
gravier ou de pierres concassees. Faites extr_mement
attention Iorsque vous traversez des allees, chemins ou
routes de gravier ou pierres concassees.
° Sur les pentes, deblayez la neige en vous deplacant
vers le haut et vers le bas. Ne deblayez jama_s 16s
pentes en.diagonale. Faites attention Iorsq.ue vous
cnangez ae a_rection, i,Jeaeblayez jamais la neige sur
des pentes raides.
° N'essayez jamais d'utiliser la souffleuse a neige sur un
toit ou des surfaces raides, inclinees ou glissantes.
° Ne faites jamais fonctionner la souffleuse a neige sans
ecrans, plaques ou autres dispositifs de protection en
place.
°Ne faites jamais fonctionner la souffleuse a neige &
proximite d'enceintes en verre, d'automobiles, de
camions, de murettes d'encadrement de soupirail, de
lieux de debarquement, etc. sans avoir ajuste au
prealable I'angle de la decharge de neige. Tenez les
enfants et les animaux & I'ecart.
° Ne forcez pas nine surchargez la souffleuse & neige.
Elle accomplira un travail de meilleure qualite, en
presentant moins de dangers, si vous respectez la
cadence nominale pour laquelle elle a et6 congue.
° Ne faites jamais fonctionner la machine & vitesse rapide
sur des surfaces glissantes. Regardez derriere vous et
faites attention Iorsque vous fait-esmarche arriere.
° Ne deblayez jamais en direction des gens et ecartez-les
de votre chemin pendant I'utilisation de I'appareil.
° Portez des lunettes de securit6 conformes aux normes
ANSI Z87.1 ainsi que des prot&ge-oreilles durant
I'utilisation de I'appareil. Portez un masque facial ou
antipoussieres si vous travaillez dans un lieu poussiereux.
° N'utilisez I'appareil qu'en plein jour ou avec un bon
eclairage artificiel.
° I_vitez tout demarrage accidentel. Mettez-vous en
position de demarrage chaque fois que vous tirez sur la
corde de demarrage. L'operateur et I'appareil doivent
tous deux _tre en position stable & ce moment-I& Voir
les Instructions de demarrage et d'arr_t.
° Servez-vous des outils appropries. N'utilisez cet outil
que pour son usage prevu.
° Ne vous etirez pas. Tenez-vous toujours bien sur vos
pieds en position d'equilibre.
° Tenez toujours I'appareil des deux mains Iorsque vous
le faites marcher. Agrippez fermement les poignees
avant et arriere
° Gardez les mains, le visage et les pieds 61oignes des
pieces mobiles. Ne touchez pas I'helice en rotation et
n'essayez pas de I'arr_ter.
° Si le rotor ne tourne pas librement parce qu'il est pris
par la glace, degelez soigneusement I'appareil avant
d'essayer de le faire fonctionner avec le moteur.
° Veillez & maintenir le rotor exempt de debris.
° N'essayez jamais de nettoyer le rotor alors que le
moteur est en marche. Eteignez d'abord le moteur.
° Tenez les v_tements et les parties du corps & I'ecart
du rotor.
° Ne faites pas tourner le moteur & un regime excessif.
Ne faites pas tourner le moteur & haut r6gime si vous
ne deblayez pas la neige.
° Arr_tez toujours le moteur si le travail est retarde ou si
vous vous deplacez d'un lieu & I'autre.
° Coupez le moteur du rotor Iorsque la souffleuse & neige
est transportee ou non utilisee.
° Si vous heurtez un corps etranger, eteignez la t_te
d'entrafnement et verifiez que la souffleuse & neige n'est
dPaSendommagee. Debranchez I'appareil. Reparez tout
ommage avant de redemarrer et utiliser I'appareil.
° Si I'appareil se met & vibrer de maniere anormale,
arr_tez la t_te d'entrafnement et procedez
immediatement a une verification. Les vibrations
indiquent generalement la presence d'un probleme.
° Arr_tez le moteur et debranchez I'appareil chaque fois
que vous n'_tes plus en position de fonctionnement,
avant de deboucher le rotor ou les aubes de
decharge, et Iorsque vous procedez a des
reparations, reglages ou inspections.
°Ne soufflez jamais la neige en direction d'une route
publique ou pres de circulation routiere.
° Laissez le souffleuse & neige tourner pendant
quelques minutes apres avoir deblaye la neige pour
eviter que les pieces mobiles ne gelent pas.
° N'utilisez que des pieces de equipement original
rechange et accessoires d'orig_ne pour cet appareil.
Elles sont disponibles aupres de votre
concessionnaire agre& L'utilisation de pieces ou
accessoires autres que ceux de eqiupement original
_,aeUtcauser des blessures graves, endommager
ppareil et annuler sa garantie.
° N'utilisez pas I'appareil Iorsque vous le tenez & la
main. Ne ramassez pas I'appareil Iorsqu'il fonctionne.
La machine est congue pour se deplacer sur le sol.
AUTRES AVERTISSEMENTS DE SI_CURITI_
° Laissez le moteur se refroidir avant de I'entreposer ou
de le transporter. Attachez bien I'appareil pendant le
transport.
° Rangez I'appareil dans un endroit verrouille et sec, ou
eleve et sec, hors de portee des enfants, pour eviter
une utilisation indesirable ou un accident.
° Si les etiquettes sur la machine deviennent illisibles ou
commencent a se decoller, veuillez contacter votre
concessionnaire agre&
°Ne trempez et n'arrosez jamais I'appareil avec de I'eau
ou tout autre liquide. Gardez les po_gnees seches,
propres et exemptes de debris. Nettoyez apres chaque
usage. Voir la section Nettoyage et Entreposage.
° Conservez ces instructions. Consultez-les souvent et
servez-vous en pour instruire d'autres usagers. Si
vous pr_tez I'appareil & quelqu'un, pr_tez-lui
egalement ces instructions.
CONSERVEZ CES
INSTRUCTIONS
F5
Ce manuel de I'utilisateur decrit les symboles et pictogrammes de securit6 et internationaux pouvant apparaTtre sur ce
produit. Consultez le manuel de I'utilisateur pour les informations concernant la securit6, le montage, le fonctionnement,
I'entretien et les reparations.
SYMBOLE SIGNIFICATION
SYMBOLE SIGNIFICATION
SYMBOLE ALERTE DE
SECURITE
Indique un danger, un avertissement
ou une mise en garde. Ce symbole
peut _tre combine a d'autres symboles
ou pictogrammes.
LES OBJETS PROJETI_S
PEUVENT PROVOQUER DES
BLESSURES GRAVES
AVERTISSEMENT :les
petits objets peuvent _tre projetes
grande vitesse, ce qui peut causer des
blessures.
AVERTISSEMENT- LISEZ LE
MANUEL DE L'UTILISATEUR
Lisez le manuel de I'utilisateur et suivez
tous les avertissements et consignes
de securit6. Vous pourriez a defaut
entraTner des blessures graves pour
vous ou d'autres personnes.
® e I:!:LOIGNEZ LES SPECTATEURS
eloignez tout spectateur, les enfants et
les animaux domestiques en
particulier, d'au moins 15 m (50 pi) de
la zone de coupe.
LE ROTOR EN ROTATION PEUT
PROVOQUER DES BLESSURES
GRAVES
AVERTISSEMENT :
gardez les mains, les pieds et les
v_tements 61oignesde la decharge de la
souffleuse. Ne vous tenez pas devant
I'appareil et ne nettoyez pas le rotor a la
main.
GARDER MAINS ET PIEDS ._,
DISTANCE
F6
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44

Yard Machines Snow Fox Le manuel du propriétaire

Taper
Le manuel du propriétaire
Ce manuel convient également à