IKEA BLIXTSNABB Manuel utilisateur

Catégorie
Plaques de cuisson
Taper
Manuel utilisateur
BLIXTSNABB
GB
FR
ENGLISH
Please refer to the last page of this manual for the full list of
IKEA appointed After Sales Service Provider and relative
national phone numbers.
FRANÇAIS
Vous trouverez la liste complète des centres de service
après-vente choisis par IKEA et leurs numéros de téléphone
respectifs à la n de cette notice.
ENGLISH 4
FRANÇAIS 29
Contents
Safety information 4
Safety instructions 6
Installation 9
Electrical connection 9
Product description 11
Daily use 13
Flexible induction cooking area 15
Cooking table 19
Cookware guidance 20
Care and cleaning 21
Troubleshooting 21
Technical data 25
Energy eciency 25
Environmental concerns
26
IKEA guarantee
26
Subject to change without notice.
Safety information
Before the installation and use of the appliance, carefully read
the supplied instructions. The manufacturer is not responsible
if an incorrect installation and use causes injuries and
damage. Always keep the instructions with the appliance for
future reference.
Children and vulnerable people safety
This appliance can be used by children aged from 8 years
and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning
the use of the appliance in a safe way and understand the
hazards involved.
Children between 3 and 8 years of age and persons with
very extensive and complex disabilities shall be kept away
from the appliance unless continuously supervised.
Children of less than 3 years of age should be kept away
from the appliance unless continuously supervised.
Do not let children play with the appliance.
Keep all packaging away from children and dispose of it
appropriately.
ENGLISH
4
Keep children and pets away from the appliance when it
operates or when it cools down. Accessible parts may
become hot during use.
If the appliance has a child safety device, it should be
activated.
Children shall not carry out cleaning and user maintenance
of the appliance without supervision.
General Safety
WARNING: The appliance and its accessible parts become
hot during use. Care should be taken to avoid touching
heating elements.
Do not operate the appliance by means of an external timer
or separate remote-control system.
WARNING: Unattended cooking on a hob with fat or oil can
be dangerous and may result in re.
NEVER try to extinguish a re with water, but switch o the
appliance and then cover ame e.g. with a lid or a re
blanket.
CAUTION: The cooking process has to be supervised. A short
term cooking process has to be supervised continuously.
WARNING: Danger of re: Do not store items on the cooking
surfaces.
Metallic objects such as knives, forks, spoons and lids should
not be placed on the hob surface since they can get hot.
Do not use the appliance before installing it in the built-in
structure.
Disconnect the appliance from the electrical supply before
maintenance.
Do not use a steam cleaner to clean the appliance.
After use, switch o the hob element by its control and do
not rely on the pan detector.
ENGLISH
5
If the glass ceramic surface / glass surface is cracked, switch
o the appliance and unplug it from the mains. In case the
appliance is connected to the mains directly using junction
box, remove the fuse to disconnect the appliance from
power supply. In either case contact the Authorised Service
Centre.
If the supply cord is damaged, it must be replaced by the
manufacturer, the Authorised Service Centre or similarly
qualied persons in order to avoid a hazard.
WARNING: Use only hob guards designed by the
manufacturer of the cooking appliance or indicated by the
manufacturer of the appliance in the instructions for use as
suitable or hob guards incorporated in the appliance. The
use of inappropriate guards can cause accidents.
Safety instructions
Installation
Warning! The appliance must be
installed by the authorised
installer.
Follow the Assembly instructions
supplied with the appliance.
Remove all the packaging.
Do not install or use a damaged
appliance.
Keep the minimum distance from other
appliances and units.
Always take care when moving the
appliance as it is heavy. Always use safety
gloves and enclosed footwear.
Seal the cut surfaces with a sealant to
prevent moisture to cause swelling.
Protect the bottom of the appliance from
steam and moisture.
Do not install the appliance adjacent to a
door or under a window. This prevents
hot cookware falling from the appliance
when the door or the window is opened.
Make sure that the space underneath the
hob is sucient for air circulation.
The bottom of the appliance can get hot.
If the appliance is installed above the
drawers, make sure to install a non-
combustible separation panel under the
appliances to prevent access to the
bottom.
Electrical Connection
Warning! Risk of re and electric
shock.
All electrical connections should be made
by the authorised installer.
The appliance must be earthed.
Before carrying out any operation make
sure that the appliance is disconnected
from the power supply.
Make sure that the parameters on the
rating plate are compatible with the
electrical ratings of the mains power
supply.
Make sure the appliance is installed
correctly. Loose and incorrect electricity
ENGLISH 6
mains cable or plug (if applicable) can
make the terminal become too hot.
Use the correct electricity mains cable.
Do not let the electricity mains cable
tangle.
Make sure that a shock protection is
installed.
Use the strain relief clamp on the cable.
Make sure the mains cable or plug (if
applicable) does not touch the hot
appliance or hot cookware, when you
connect the appliance to the near
sockets.
Do not use multi-plug adapters and
extension cables.
Make sure not to cause damage to the
mains plug (if applicable) or to the mains
cable. Contact our Authorised Service
Centre or an electrician to change a
damaged mains cable.
The shock protection of live and insulated
parts must be fastened in such a way that
it cannot be removed without tools.
Connect the mains plug to the mains
socket only at the end of the installation.
Make sure that there is access to the
mains plug after the installation.
If the mains socket is loose, do not
connect the mains plug.
Do not pull the mains cable to disconnect
the appliance. Always pull the mains plug.
Use only correct isolation devices: line
protecting cut-outs, fuses (screw type
fuses removed from the holder), earth
leakage trips and contactors.
The electrical installation must have an
isolation device which lets you disconnect
the appliance from the mains at all poles.
The isolation device must have a contact
opening width of minimum 3 mm.
Use
Warning! Risk of injury, burns
and electric shock.
Remove all the packaging, labelling and
protective lm (if applicable) before rst
use.
This appliance is for household use only.
Do not change the specication of this
appliance.
Make sure that the ventilation openings
are not blocked.
Do not let the appliance stay unattended
during operation.
Set the cooking zone to o” after each
use.
Do not rely on the pan detector.
Do not put cutlery or saucepan lids on the
cooking zones. They can become hot.
Do not operate the appliance with wet
hands or when it has contact with water.
Do not use the appliance as a work
surface or as a storage surface.
If the surface of the appliance is cracked,
disconnect immediately the appliance
from the power supply. This to prevent an
electrical shock.
Users with a pacemaker must keep a
distance of minimum 30 cm from the
induction cooking zones when the
appliance is in operation.
When you place food into hot oil, it may
splash.
Warning! Risk of re and
explosion
Fats and oil when heated can release
ammable vapours. Keep ames or
heated objects away from fats and oils
when you cook with them.
The vapours that very hot oil releases can
cause spontaneous combustion.
Used oil, that can contain food remnants,
can cause re at a lower temperature
than oil used for the rst time.
Do not put ammable products or items
that are wet with ammable products in,
near or on the appliance.
Warning! Risk of damage to the
appliance.
Do not keep hot cookware on the control
panel.
Do not put a hot pan cover on the glass
surface of the hob.
Do not let cookware boil dry.
Be careful not to let objects or cookware
fall on the appliance. The surface can be
damaged.
ENGLISH
7
Do not activate the cooking zones with
empty cookware or without cookware.
Do not put aluminium foil on the
appliance.
Cookware made of cast iron, aluminium
or with a damaged bottom can cause
scratches on the glass / glass ceramic.
Always lift these objects up when you
have to move them on the cooking
surface.
This appliance is for cooking purposes
only. It must not be used for other
purposes, for example room heating.
Care and cleaning
Clean the appliance regularly to prevent
the deterioration of the surface material.
Switch o the appliance and let it cool
down before cleaning.
Do not use water spray and steam to
clean the appliance.
Clean the appliance with a moist soft
cloth. Only use neutral detergents. Do not
use abrasive products, abrasive cleaning
pads, solvents or metal objects.
Service
To repair the appliance contact the
Authorised Service Centre. Use original
spare parts only.
Concerning the lamp(s) inside this
product and spare part lamps sold
separately: These lamps are intended to
withstand extreme physical conditions in
household appliances, such as
temperature, vibration, humidity, or are
intended to signal information about the
operational status of the appliance. They
are not intended to be used in other
applications and are not suitable for
household room illumination.
Disposal
Warning! Risk of injury or
suocation.
Contact your municipal authority for
information on how to discard the
appliance correctly.
Disconnect the appliance from the mains
supply.
Cut o the mains electrical cable close to
the appliance and dispose of it.
ENGLISH 8
Installation
General information
min.
28 mm
min.
500 mm
min.
28 mm
min. 50 mm
max.
R 5 mm
490
±1
mm
750
±1
mm
520 mm
780 mm
55 mm
min.
5 mm
Installation process must follow
the laws, ordinances, directives
and standards (electrical safety
rules and regulations, proper
recycling in accordance with the
regulations, etc.) in force in the
country of use!
For further information on the installation
refer to the Assembly Instruction.
If there is no oven beneath the hob,
install a separation panel under the
appliance according to the Assembly
Instruction.
Do not use silicon sealant between the
appliance and the worktop.
Electrical connection
Warning! Refer to Safety
chapters.
Warning! All electrical
connections must be made by an
authorised installer.
Electrical connection
Before connecting, check if the nominal
voltage of the appliance, provided on the
rating plate, corresponds to the available
supply voltage. The rating plate is located
on the lower casing of the hob.
Follow the connection diagram (it is
located on the underneath surface of the
casing of the hob).
Use only original spare parts provided by
spare parts service.
The appliance is not provided with a
mains cable. Buy the right one from a
specialized dealer. Single phase or two-
phase connection requires a mains cable
of minimum 70°C temperature stability.
Cable needs mandatory end sleeves.
According to IEC regulations use for one-
phase connection: mains cable 3 x 4mm²
ENGLISH 9
and for two-phase connection: mains
cable 4 x 2.5mm². Please respect specic
national regulations in the rst priority.
You must have the means for
disconnection incorporated in the xed
wiring.
You must have the connection and the
connecting links carried out as shown in
the connection diagram.
The earth lead is connected to terminal
and must be longer than leads carrying
electric current.
Secure the connecting cable with cable
clips or clamps.
Connection diagram
220V-240V 1N
220V-240V
N PE
L
400V 2N
220V-240V
220V-240V
N
L1
L2
PE
Insert the shunts between the screws as shown.
Main power connection 1-phase Main power connection 2-phase
L N
L1 L2 L3 N
Wiring colours: Wiring colours:
Yellow / green Yellow / green
N Blue N Blue
L Black or brown L1 Black
L2 Brown
Tighten the terminal screws
securely!
Once you connect the hob to the mains,
check if all the cooking zones are ready to
use. Place a pot with some water on a
cooking zone and set the power setting for
each zone to the maximum level for a short
time.
ENGLISH 10
If or symbol comes on
the display after you switch on
the hob for the rst time, refer to
"Troubleshooting".
Product description
Cooking surface layout
5 4
3
2
1
1
Single cooking zone (210 mm) 2300 W,
with Booster 3200 W
2
Single cooking zone (180 x 210 mm) 2300
W, with Booster 3200 W
3
Single cooking zone (180 x 210 mm) 2300
W, with Booster 3200 W
4
Control panel
5
Flexible induction cooking area (440 x
220 mm), with Booster 3600 W
ENGLISH 11
Control panel layout
11 914
6
7 8
1213
52 3 41
10
1
To switch the appliance on / o.
2
To activate and deactivate Lock / Child
Lock / Cleaning mode.
3
To activate and deactivate Pre-Set
Cooking.
4
To switch between Multi-Flexi
modes.
5
To show the power setting.
6
To show for which zone you set the time.
7
Timer display: 00 - 99 minutes.
8
To activate and deactivate Bridge.
9
To activate Pause.
10
To activate Booster.
11
To set a power setting: 0 - 9.
12
To select Timer functions.
13
/ To increase and decrease the
time.
14
To show the power setting for the
exible induction cooking area.
Power setting displays
Display Description
The cooking zone is deactivated.
-
The cooking zone operates.
Pause operates.
Booster operates.
+ digit
There is a malfunction. Refer to "Troubleshooting".
A cooking zone is still hot (residual heat).
Lock / Child Lock / Cleaning mode operates.
Incorrect or too small cookware or no cookware on the cooking zone.
Automatic Switch O operates.
ENGLISH 12
Display Description
/ /
Pre-Set Cooking mode operates.
Residual heat indicator
Warning! Risk of burns from
residual heat! After you switch o
the appliance, the cooking zones
need some time to cool down.
Look at the residual heat indicator
.
Use residual heat for melting and keeping
food warm.
Daily use
Switching on / o
Touch for 1 second to switch the
appliance on / o.
Automatic Switch O
The function switches o the appliance
automatically if:
all cooking zones are deactivated.
you do not set the power setting after
switching on the appliance.
you cover any symbol with an object (a
pan, a cloth, etc.) for longer than approx.
10 seconds.
you do not deactivate a cooking zone
after a certain time, or you do not modify
the power setting, or if overheating
occurs (e.g. when a pan boils dry). The
symbol
lights up. Before using again,
you must set the cooking zone to .
Power setting
Automatic switch o
after
, -
6 hours
-
5 hours
4 hours
-
1.5 hours
If cookware that is not suitable is
used, lights up on the display
and after 2 minutes the indicator
for the cooking zone deactivates.
Adjusting the power setting
Touch the power selector at a desired power
setting. Adjust to the left or the right, if
necessary. Do not release before you reach a
desired power setting.
Using the Booster function
The Booster function makes additional
power available for the induction cooking
zones. Touch to activate it,
lights up on the display. After a maximum of
10 minutes, the induction cooking zones
automatically return to the
power setting.
Bridge function
The function connects two right side cooking
zones and they operate as one. First set the
power setting for one of the cooking zones.
ENGLISH
13
To activate the function touch . To set or
change the power setting touch one of the
symbols.
To deactivate the function touch . The
cooking zones operate independently.
Using the Timer
Touch repeatedly until the indicator of a
desired cooking zone ashes. For example
for the front right zone.
Touch or of the Timer to set the time
between 00 and 99 minutes. When the
indicator of the cooking zone ashes more
slowly, the time counts down. Set the power
setting.
If the power setting is set and the time set
has elapsed, an acoustic signal sounds, 00
ashes, and cooking zone deactivates. If
cooking zone is not in use and the time set
has elapsed an acoustic signal sounds and
00 ashes.
Touch
to deactivate the function for the
selected cooking zone and the indicator for
this cooking zone ashes faster. Touch
and the remaining time counts backwards to
00. The indicator of the cooking zone goes
out.
Pause
The function sets all cooking zones that
operate to the lowest power setting .
When the function operates, you cannot
change the power setting. The function does
not stop the Timer function.
To activate this function touch
. The
symbol comes on.
To deactivate this function touch . The
power setting that you set before comes
on.
Lock / Cleaning mode
You can lock the control panel and keep the
cooking zones operating. It prevents an
accidental change of the power setting.
Use the function to clean the
surface of the hob during the
cooking session, if needed.
First set the power setting.
To start the function touch . The symbol
comes on for 4 seconds. The Timer stays
on.
To stop the function touch . The power
setting that you set before comes on.
When you switch o the appliance, you also
stop this function.
Child Lock
This function prevents an accidental
operation of the appliance.
To activate the function:
Switch on the appliance with . Do not
set the power settings.
Touch for 4 seconds. The symbol
comes on.
Switch o the appliance with .
To deactivate the function:
Switch on the appliance with . Do not
set the power settings. Touch
for 4
seconds. The symbol comes on.
Switch o the appliance with .
To override the function for only one cooking
time:
Switch on the appliance with . The
symbol comes on.
ENGLISH
14
Touch for 4 seconds. Set the power
setting in 10 seconds. You can operate the
appliance.
When you switch o the appliance with
, the function operates again.
OSound Control - Deactivating and
activating the sounds
Deactivating the sounds
Switch o the appliance.
Touch
for 3 seconds. The displays comes
on and goes out. Touch for 3 seconds.
comes on, the sound is on. Touch ,
comes on, the sound is o.
When this function operates, you can hear
the sounds only when:
you touch
you put something on the control panel.
Activating the sounds
Switch o the appliance.
Touch for 3 seconds. The displays come
on and go out. Touch for 3 seconds.
comes on, because the sound is o. Touch
, comes on. The sound is on.
Power exchange function
Cooking zones are grouped according to
the location and number of the phases in
the hob. See the illustration.
Each phase has a maximum electricity
loading of 3700 W.
The function divides the power between
cooking zones connected to the same
phase.
The function activates when the total
electricity loading of the cooking zones
connected to a single phase exceeds 3700
W.
The function decreases the power of the
other cooking zones connected to the
same phase.
The power setting display of the reduced
zones changes between two levels.
Flexible induction cooking area
Warning! Refer to Safety
chapters.
Multi-Flexi mode
The exible induction cooking area consists
of four sections. The sections can be
combined into two cooking zones with
dierent size, or into one large cooking area.
You choose the combination of the sections
by choosing the mode applicable to the size
of the cookware you want to use. There are
three modes: Multi-Flexi mode 2 + 2 sections
(activated automatically when you switch on
the hob), Multi-Flexi mode 3 + 1 sections and
Multi-Flexi mode 4 sections.
To set the power setting use two
left side power selectors.
Switching between the modes
To switch between the modes use symbol:
.
ENGLISH 15
When you switch between the
modes the power setting is set
back to 0.
Diameter and position of the cookware
Choose the mode applicable to the size and
the shape of the cookware. The cookware
should cover the selected area as much as
possible. Place the cookware centrally on the
selected area!
Place the cookware with the bottom
diameter smaller than 160 mm centrally on a
single section.
100-160mm
Place the cookware with the bottom
diameter larger then 160 mm centrally
between two sections.
> 160 mm
Multi-Flexi mode 2 + 2 sections
This mode is active when you switch on the
hob. It connects the sections into two
separate cooking zones. You can set the
power setting for each zone separately. Use
two left side power selectors.
Correct cookware position:
Incorrect cookware position:
ENGLISH
16
Multi-Flexi mode 3 + 1 sections
To activate the mode press until you see
the correct mode indicator. This mode
connects three rear sections into one
cooking zone. The one front section is not
connected and operates as a separate
cooking zone. You can set the power setting
for each zone separately. Use two left side
power selectors.
Correct cookware position:
To use this mode you have to place the
cookware on the three connected sections. If
you use cookware smaller than two sections
the display shows
and after 2 minutes the
zone deactivates.
Incorrect cookware position:
Multi-Flexi mode 4 sections
To activate the mode press until you see
the correct mode indicator. This mode
connects all sections into one cooking zone.
To set the power setting use one of the left
side power selector.
Correct cookware position:
ENGLISH
17
To use this mode you have to place the
cookware on the four connected sections. If
you use cookware smaller than three
sections the display shows and after 2
minutes the zone deactivates.
Incorrect cookware position:
Pre-Set Cooking mode
This function allows you to adjust the
temperature by moving the cookware to a
dierent position on the induction cooking
area.
The function divides the induction cooking
area into three areas with dierent power
settings. The hob senses the position of the
cookware and sets the power setting
corresponding with the position. You can
place the cookware in the front, middle or
rear position. If you place the cookware in
the front you get the highest power setting.
You can decrease the power setting by
moving the cookware in the middle or to the
rear position.
Use only one pot when you
operate the function.
General information:
160 mm is the minimum bottom diameter
of the cookware for this function.
Power setting display for the left rear
power selector shows the position of the
cookware on the induction cooking area.
Front
, middle , rear .
Power setting display for the left front
power selector shows the power setting.
To change the power setting use left
front power selector.
When you activate the function for the
rst time you will get power setting
for
the front position, for the middle
position and for the rear position.
ENGLISH
18
You can change the power settings for
each position separately. The hob will
remember your power settings next time
you activate the function. If there is a
power cut, the hob will restore the default
settings of the function.
Activating the function
To activate the function place the cookware
in the correct position on the cooking area.
Touch . The indicator above the symbol
comes on. If you do not place the cookware
on the cooking area comes on and after 2
minutes the exible induction cooking area
is set to .
Deactivating the function
To deactivate the function touch or set
the power setting to . The indicator above
the symbol goes o.
Cooking table
Heat setting Use to: Time
(min)
Hints
1 Keep cooked food warm. as nec‐
essary
Put a lid on the cookware.
1 - 2 Hollandaise sauce, melt: butter,
chocolate, gelatine.
5 - 25 Mix from time to time.
1 - 2 Solidify: uy omelettes, baked
eggs.
10 - 40 Cook with a lid on.
2 - 3 Simmer rice and milkbased
dishes, heat up ready-cooked
meals.
25 - 50 Add at least twice as much liq‐
uid as rice, mix milk dishes
halfway through the proce‐
dure.
3 - 4 Steam vegetables, sh, meat. 20 - 45 Add a couple of tablespoons of
liquid.
4 - 5 Steam potatoes. 20 - 60 Use max. ¼ l of water for 750 g
of potatoes.
4 - 5 Cook larger quantities of food,
stews and soups.
60 - 150 Up to 3 l of liquid plus ingredi‐
ents.
ENGLISH 19
Heat setting Use to: Time
(min)
Hints
6 - 7 Gentle fry: escalope, veal cor‐
don bleu, cutlets, rissoles, saus‐
ages, liver, roux, eggs, pan‐
cakes, doughnuts.
as nec‐
essary
Turn halfway through.
7 - 8 Heavy fry, hash browns, loin
steaks, steaks.
5 - 15 Turn halfway through.
9 Boil water, cook pasta, sear meat (goulash, pot roast), deep-fry chips.
Boil large quantities of water. Booster is activated.
The data in the table is for
guidance only.
Cookware guidance
Warning! Refer to Safety
chapters.
What pots to use
Only use cookware which is suitable for
induction hobs. The cookware must be made
of a ferromagnetic material, such as:
cast iron;
enamelled steel;
carbon steel;
stainless steel (most types);
aluminium with ferromagnetic coating or
a ferromagnetic plate.
To determine if a pot or pan is suitable,
check for the symbol
(usually stamped on
the bottom of the cookware). You can also
hold a magnet to the bottom. If it clings to
the underside, the cookware will work on the
induction hob.
To ensure optimum eciency, always use
pots and pans with a at bottom that
distributes the heat evenly. If the bottom is
uneven, this will aect power and heat
conduction.
How to use
Minimum diameter of pot / pan base for
the dierent cooking areas
To ensure that the hob operates properly,
the cookware must have a suitable minimum
diameter as well as cover one or more of the
reference points indicated on the surface of
the hob.
Always use the cooking zone that best
corresponds to the diameter of the bottom
of the cookware.
Cooking zone Cookware diame‐
ter [mm]
Flexible induction
cooking area
100
1)
Middle front 125 - 210
Right rear 125 - 180
Right front 125 - 180
1) Minimum diameter of pot / pan base for a single
section.
ENGLISH 20
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64

IKEA BLIXTSNABB Manuel utilisateur

Catégorie
Plaques de cuisson
Taper
Manuel utilisateur

dans d''autres langues