IKEA BLIXTSNABB Manuel utilisateur

BLIXTSNABB

GB

FR

ENGLISH

Please refer to the last page of this manual for the full list of

IKEA appointed After Sales Service Provider and relative

national phone numbers.

FRANÇAIS

Vous trouverez la liste complète des centres de service

après-vente choisis par IKEA et leurs numéros de téléphone

respectifs à la n de cette notice.

ENGLISH 4

FRANÇAIS 29

Contents

Safety information 4

Safety instructions 6

Installation 9

Electrical connection 9

Product description 11

Daily use 13

Flexible induction cooking area 15

Cooking table 19

Cookware guidance 20

Care and cleaning 21

Troubleshooting 21

Technical data 25

Energy eciency 25

Environmental concerns

26

IKEA guarantee

26

Subject to change without notice.

Safety information

Before the installation and use of the appliance, carefully read

the supplied instructions. The manufacturer is not responsible

if an incorrect installation and use causes injuries and

damage. Always keep the instructions with the appliance for

future reference.

Children and vulnerable people safety

•

This appliance can be used by children aged from 8 years

and above and persons with reduced physical, sensory or

mental capabilities or lack of experience and knowledge if

they have been given supervision or instruction concerning

the use of the appliance in a safe way and understand the

hazards involved.

• Children between 3 and 8 years of age and persons with

very extensive and complex disabilities shall be kept away

from the appliance unless continuously supervised.

•

Children of less than 3 years of age should be kept away

from the appliance unless continuously supervised.

•

Do not let children play with the appliance.

•

Keep all packaging away from children and dispose of it

appropriately.

ENGLISH

4

• Keep children and pets away from the appliance when it

operates or when it cools down. Accessible parts may

become hot during use.

• If the appliance has a child safety device, it should be

activated.

• Children shall not carry out cleaning and user maintenance

of the appliance without supervision.

General Safety

•

WARNING: The appliance and its accessible parts become

hot during use. Care should be taken to avoid touching

heating elements.

• Do not operate the appliance by means of an external timer

or separate remote-control system.

• WARNING: Unattended cooking on a hob with fat or oil can

be dangerous and may result in re.

• NEVER try to extinguish a re with water, but switch o the

appliance and then cover ame e.g. with a lid or a re

blanket.

•

CAUTION: The cooking process has to be supervised. A short

term cooking process has to be supervised continuously.

•

WARNING: Danger of re: Do not store items on the cooking

surfaces.

•

Metallic objects such as knives, forks, spoons and lids should

not be placed on the hob surface since they can get hot.

•

Do not use the appliance before installing it in the built-in

structure.

•

Disconnect the appliance from the electrical supply before

maintenance.

•

Do not use a steam cleaner to clean the appliance.

•

After use, switch o the hob element by its control and do

not rely on the pan detector.

ENGLISH

5

• If the glass ceramic surface / glass surface is cracked, switch

o the appliance and unplug it from the mains. In case the

appliance is connected to the mains directly using junction

box, remove the fuse to disconnect the appliance from

power supply. In either case contact the Authorised Service

Centre.

• If the supply cord is damaged, it must be replaced by the

manufacturer, the Authorised Service Centre or similarly

qualied persons in order to avoid a hazard.

• WARNING: Use only hob guards designed by the

manufacturer of the cooking appliance or indicated by the

manufacturer of the appliance in the instructions for use as

suitable or hob guards incorporated in the appliance. The

use of inappropriate guards can cause accidents.

Safety instructions

Installation

Warning! The appliance must be

installed by the authorised

installer.

Follow the Assembly instructions

supplied with the appliance.

• Remove all the packaging.

• Do not install or use a damaged

appliance.

• Keep the minimum distance from other

appliances and units.

• Always take care when moving the

appliance as it is heavy. Always use safety

gloves and enclosed footwear.

• Seal the cut surfaces with a sealant to

prevent moisture to cause swelling.

• Protect the bottom of the appliance from

steam and moisture.

• Do not install the appliance adjacent to a

door or under a window. This prevents

hot cookware falling from the appliance

when the door or the window is opened.

• Make sure that the space underneath the

hob is sucient for air circulation.

• The bottom of the appliance can get hot.

If the appliance is installed above the

drawers, make sure to install a non-

combustible separation panel under the

appliances to prevent access to the

bottom.

Electrical Connection

Warning! Risk of re and electric

shock.

• All electrical connections should be made

by the authorised installer.

• The appliance must be earthed.

• Before carrying out any operation make

sure that the appliance is disconnected

from the power supply.

• Make sure that the parameters on the

rating plate are compatible with the

electrical ratings of the mains power

supply.

• Make sure the appliance is installed

correctly. Loose and incorrect electricity

ENGLISH 6

mains cable or plug (if applicable) can

make the terminal become too hot.

• Use the correct electricity mains cable.

• Do not let the electricity mains cable

tangle.

• Make sure that a shock protection is

installed.

• Use the strain relief clamp on the cable.

• Make sure the mains cable or plug (if

applicable) does not touch the hot

appliance or hot cookware, when you

connect the appliance to the near

sockets.

• Do not use multi-plug adapters and

extension cables.

• Make sure not to cause damage to the

mains plug (if applicable) or to the mains

cable. Contact our Authorised Service

Centre or an electrician to change a

damaged mains cable.

• The shock protection of live and insulated

parts must be fastened in such a way that

it cannot be removed without tools.

• Connect the mains plug to the mains

socket only at the end of the installation.

Make sure that there is access to the

mains plug after the installation.

• If the mains socket is loose, do not

connect the mains plug.

• Do not pull the mains cable to disconnect

the appliance. Always pull the mains plug.

• Use only correct isolation devices: line

protecting cut-outs, fuses (screw type

fuses removed from the holder), earth

leakage trips and contactors.

• The electrical installation must have an

isolation device which lets you disconnect

the appliance from the mains at all poles.

The isolation device must have a contact

opening width of minimum 3 mm.

Use

Warning! Risk of injury, burns

and electric shock.

• Remove all the packaging, labelling and

protective lm (if applicable) before rst

use.

• This appliance is for household use only.

• Do not change the specication of this

appliance.

• Make sure that the ventilation openings

are not blocked.

• Do not let the appliance stay unattended

during operation.

• Set the cooking zone to “o” after each

use.

• Do not rely on the pan detector.

• Do not put cutlery or saucepan lids on the

cooking zones. They can become hot.

• Do not operate the appliance with wet

hands or when it has contact with water.

• Do not use the appliance as a work

surface or as a storage surface.

• If the surface of the appliance is cracked,

disconnect immediately the appliance

from the power supply. This to prevent an

electrical shock.

• Users with a pacemaker must keep a

distance of minimum 30 cm from the

induction cooking zones when the

appliance is in operation.

• When you place food into hot oil, it may

splash.

Warning! Risk of re and

explosion

• Fats and oil when heated can release

ammable vapours. Keep ames or

heated objects away from fats and oils

when you cook with them.

• The vapours that very hot oil releases can

cause spontaneous combustion.

• Used oil, that can contain food remnants,

can cause re at a lower temperature

than oil used for the rst time.

• Do not put ammable products or items

that are wet with ammable products in,

near or on the appliance.

Warning! Risk of damage to the

appliance.

• Do not keep hot cookware on the control

panel.

• Do not put a hot pan cover on the glass

surface of the hob.

• Do not let cookware boil dry.

• Be careful not to let objects or cookware

fall on the appliance. The surface can be

damaged.

ENGLISH

7

• Do not activate the cooking zones with

empty cookware or without cookware.

• Do not put aluminium foil on the

appliance.

• Cookware made of cast iron, aluminium

or with a damaged bottom can cause

scratches on the glass / glass ceramic.

Always lift these objects up when you

have to move them on the cooking

surface.

• This appliance is for cooking purposes

only. It must not be used for other

purposes, for example room heating.

Care and cleaning

• Clean the appliance regularly to prevent

the deterioration of the surface material.

• Switch o the appliance and let it cool

down before cleaning.

• Do not use water spray and steam to

clean the appliance.

• Clean the appliance with a moist soft

cloth. Only use neutral detergents. Do not

use abrasive products, abrasive cleaning

pads, solvents or metal objects.

Service

• To repair the appliance contact the

Authorised Service Centre. Use original

spare parts only.

• Concerning the lamp(s) inside this

product and spare part lamps sold

separately: These lamps are intended to

withstand extreme physical conditions in

household appliances, such as

temperature, vibration, humidity, or are

intended to signal information about the

operational status of the appliance. They

are not intended to be used in other

applications and are not suitable for

household room illumination.

Disposal

Warning! Risk of injury or

suocation.

• Contact your municipal authority for

information on how to discard the

appliance correctly.

• Disconnect the appliance from the mains

supply.

• Cut o the mains electrical cable close to

the appliance and dispose of it.

ENGLISH 8

Installation

General information

min.

28 mm

min.

500 mm

min.

28 mm

min. 50 mm

max.

R 5 mm

490

±1

mm

750

±1

mm

520 mm

780 mm

55 mm

min.

5 mm

Installation process must follow

the laws, ordinances, directives

and standards (electrical safety

rules and regulations, proper

recycling in accordance with the

regulations, etc.) in force in the

country of use!

• For further information on the installation

refer to the Assembly Instruction.

• If there is no oven beneath the hob,

install a separation panel under the

appliance according to the Assembly

Instruction.

• Do not use silicon sealant between the

appliance and the worktop.

Electrical connection

Warning! Refer to Safety

chapters.

Warning! All electrical

connections must be made by an

authorised installer.

Electrical connection

• Before connecting, check if the nominal

voltage of the appliance, provided on the

rating plate, corresponds to the available

supply voltage. The rating plate is located

on the lower casing of the hob.

• Follow the connection diagram (it is

located on the underneath surface of the

casing of the hob).

• Use only original spare parts provided by

spare parts service.

• The appliance is not provided with a

mains cable. Buy the right one from a

specialized dealer. Single phase or two-

phase connection requires a mains cable

of minimum 70°C temperature stability.

Cable needs mandatory end sleeves.

According to IEC regulations use for one-

phase connection: mains cable 3 x 4mm²

ENGLISH 9

and for two-phase connection: mains

cable 4 x 2.5mm². Please respect specic

national regulations in the rst priority.

• You must have the means for

disconnection incorporated in the xed

wiring.

• You must have the connection and the

connecting links carried out as shown in

the connection diagram.

• The earth lead is connected to terminal

and must be longer than leads carrying

electric current.

• Secure the connecting cable with cable

clips or clamps.

Connection diagram

220V-240V 1N

220V-240V

N PE

L

400V 2N

220V-240V

N

L1

L2

PE

Insert the shunts between the screws as shown.

Main power connection 1-phase Main power connection 2-phase

L N

L1 L2 L3 N

Wiring colours: Wiring colours:

Yellow / green Yellow / green

N Blue N Blue

L Black or brown L1 Black

L2 Brown

Tighten the terminal screws

securely!

Once you connect the hob to the mains,

check if all the cooking zones are ready to

use. Place a pot with some water on a

cooking zone and set the power setting for

each zone to the maximum level for a short

time.

ENGLISH 10

If or symbol comes on

the display after you switch on

the hob for the rst time, refer to

"Troubleshooting".

Product description

Cooking surface layout

5 4

3

2

1

Single cooking zone (210 mm) 2300 W,

with Booster 3200 W

2

Single cooking zone (180 x 210 mm) 2300

W, with Booster 3200 W

3

Single cooking zone (180 x 210 mm) 2300

W, with Booster 3200 W

4

Control panel

5

Flexible induction cooking area (440 x

220 mm), with Booster 3600 W

ENGLISH 11

Control panel layout

11 914

6

7 8

1213

52 3 41

10

1

To switch the appliance on / o.

2

To activate and deactivate Lock / Child

Lock / Cleaning mode.

3

To activate and deactivate Pre-Set

Cooking.

4

To switch between Multi-Flexi

modes.

5

To show the power setting.

6

To show for which zone you set the time.

7

Timer display: 00 - 99 minutes.

8

To activate and deactivate Bridge.

9

To activate Pause.

10

To activate Booster.

11

To set a power setting: 0 - 9.

12

To select Timer functions.

13

/ To increase and decrease the

time.

14

To show the power setting for the

exible induction cooking area.

Power setting displays

Display Description

The cooking zone is deactivated.

-

The cooking zone operates.

Pause operates.

Booster operates.

+ digit

There is a malfunction. Refer to "Troubleshooting".

A cooking zone is still hot (residual heat).

Lock / Child Lock / Cleaning mode operates.

Incorrect or too small cookware or no cookware on the cooking zone.

Automatic Switch O operates.

ENGLISH 12

Display Description

/ /

Pre-Set Cooking mode operates.

Residual heat indicator

Warning! Risk of burns from

residual heat! After you switch o

the appliance, the cooking zones

need some time to cool down.

Look at the residual heat indicator

.

Use residual heat for melting and keeping

food warm.

Daily use

Switching on / o

Touch for 1 second to switch the

appliance on / o.

Automatic Switch O

The function switches o the appliance

automatically if:

• all cooking zones are deactivated.

• you do not set the power setting after

switching on the appliance.

• you cover any symbol with an object (a

pan, a cloth, etc.) for longer than approx.

10 seconds.

• you do not deactivate a cooking zone

after a certain time, or you do not modify

the power setting, or if overheating

occurs (e.g. when a pan boils dry). The

symbol

lights up. Before using again,

you must set the cooking zone to .

Power setting

Automatic switch o

after

, -

6 hours

-

5 hours

4 hours

-

1.5 hours

If cookware that is not suitable is

used, lights up on the display

and after 2 minutes the indicator

for the cooking zone deactivates.

Adjusting the power setting

Touch the power selector at a desired power

setting. Adjust to the left or the right, if

necessary. Do not release before you reach a

desired power setting.

Using the Booster function

The Booster function makes additional

power available for the induction cooking

zones. Touch to activate it,

lights up on the display. After a maximum of

10 minutes, the induction cooking zones

automatically return to the

power setting.

Bridge function

The function connects two right side cooking

zones and they operate as one. First set the

power setting for one of the cooking zones.

ENGLISH

13

To activate the function touch . To set or

change the power setting touch one of the

symbols.

To deactivate the function touch . The

cooking zones operate independently.

Using the Timer

Touch repeatedly until the indicator of a

desired cooking zone ashes. For example

for the front right zone.

Touch or of the Timer to set the time

between 00 and 99 minutes. When the

indicator of the cooking zone ashes more

slowly, the time counts down. Set the power

setting.

If the power setting is set and the time set

has elapsed, an acoustic signal sounds, 00

ashes, and cooking zone deactivates. If

cooking zone is not in use and the time set

has elapsed an acoustic signal sounds and

00 ashes.

Touch

to deactivate the function for the

selected cooking zone and the indicator for

this cooking zone ashes faster. Touch

and the remaining time counts backwards to

00. The indicator of the cooking zone goes

out.

Pause

The function sets all cooking zones that

operate to the lowest power setting .

When the function operates, you cannot

change the power setting. The function does

not stop the Timer function.

• To activate this function touch

. The

symbol comes on.

• To deactivate this function touch . The

power setting that you set before comes

on.

Lock / Cleaning mode

You can lock the control panel and keep the

cooking zones operating. It prevents an

accidental change of the power setting.

Use the function to clean the

surface of the hob during the

cooking session, if needed.

First set the power setting.

To start the function touch . The symbol

comes on for 4 seconds. The Timer stays

on.

To stop the function touch . The power

setting that you set before comes on.

When you switch o the appliance, you also

stop this function.

Child Lock

This function prevents an accidental

operation of the appliance.

To activate the function:

• Switch on the appliance with . Do not

set the power settings.

• Touch for 4 seconds. The symbol

comes on.

• Switch o the appliance with .

To deactivate the function:

• Switch on the appliance with . Do not

set the power settings. Touch

for 4

seconds. The symbol comes on.

• Switch o the appliance with .

To override the function for only one cooking

time:

• Switch on the appliance with . The

symbol comes on.

ENGLISH

14

• Touch for 4 seconds. Set the power

setting in 10 seconds. You can operate the

appliance.

• When you switch o the appliance with

, the function operates again.

OSound Control - Deactivating and

activating the sounds

Deactivating the sounds

Switch o the appliance.

Touch

for 3 seconds. The displays comes

on and goes out. Touch for 3 seconds.

comes on, the sound is on. Touch ,

comes on, the sound is o.

When this function operates, you can hear

the sounds only when:

• you touch

• you put something on the control panel.

Activating the sounds

Switch o the appliance.

Touch for 3 seconds. The displays come

on and go out. Touch for 3 seconds.

comes on, because the sound is o. Touch

, comes on. The sound is on.

Power exchange function

• Cooking zones are grouped according to

the location and number of the phases in

the hob. See the illustration.

• Each phase has a maximum electricity

loading of 3700 W.

• The function divides the power between

cooking zones connected to the same

phase.

• The function activates when the total

electricity loading of the cooking zones

connected to a single phase exceeds 3700

W.

• The function decreases the power of the

other cooking zones connected to the

same phase.

• The power setting display of the reduced

zones changes between two levels.

Flexible induction cooking area

Warning! Refer to Safety

chapters.

Multi-Flexi mode

The exible induction cooking area consists

of four sections. The sections can be

combined into two cooking zones with

dierent size, or into one large cooking area.

You choose the combination of the sections

by choosing the mode applicable to the size

of the cookware you want to use. There are

three modes: Multi-Flexi mode 2 + 2 sections

(activated automatically when you switch on

the hob), Multi-Flexi mode 3 + 1 sections and

Multi-Flexi mode 4 sections.

To set the power setting use two

left side power selectors.

Switching between the modes

To switch between the modes use symbol:

.

ENGLISH 15

When you switch between the

modes the power setting is set

back to 0.

Diameter and position of the cookware

Choose the mode applicable to the size and

the shape of the cookware. The cookware

should cover the selected area as much as

possible. Place the cookware centrally on the

selected area!

Place the cookware with the bottom

diameter smaller than 160 mm centrally on a

single section.

100-160mm

Place the cookware with the bottom

diameter larger then 160 mm centrally

between two sections.

> 160 mm

Multi-Flexi mode 2 + 2 sections

This mode is active when you switch on the

hob. It connects the sections into two

separate cooking zones. You can set the

power setting for each zone separately. Use

two left side power selectors.

Correct cookware position:

Incorrect cookware position:

ENGLISH

16

Multi-Flexi mode 3 + 1 sections

To activate the mode press until you see

the correct mode indicator. This mode

connects three rear sections into one

cooking zone. The one front section is not

connected and operates as a separate

cooking zone. You can set the power setting

for each zone separately. Use two left side

power selectors.

Correct cookware position:

To use this mode you have to place the

cookware on the three connected sections. If

you use cookware smaller than two sections

the display shows

and after 2 minutes the

zone deactivates.

Incorrect cookware position:

Multi-Flexi mode 4 sections

To activate the mode press until you see

the correct mode indicator. This mode

connects all sections into one cooking zone.

To set the power setting use one of the left

side power selector.

Correct cookware position:

ENGLISH

17

To use this mode you have to place the

cookware on the four connected sections. If

you use cookware smaller than three

sections the display shows and after 2

minutes the zone deactivates.

Incorrect cookware position:

Pre-Set Cooking mode

This function allows you to adjust the

temperature by moving the cookware to a

dierent position on the induction cooking

area.

The function divides the induction cooking

area into three areas with dierent power

settings. The hob senses the position of the

cookware and sets the power setting

corresponding with the position. You can

place the cookware in the front, middle or

rear position. If you place the cookware in

the front you get the highest power setting.

You can decrease the power setting by

moving the cookware in the middle or to the

rear position.

Use only one pot when you

operate the function.

General information:

• 160 mm is the minimum bottom diameter

of the cookware for this function.

• Power setting display for the left rear

power selector shows the position of the

cookware on the induction cooking area.

Front

, middle , rear .

• Power setting display for the left front

power selector shows the power setting.

To change the power setting use left

front power selector.

• When you activate the function for the

rst time you will get power setting

for

the front position, for the middle

position and for the rear position.

ENGLISH

18

You can change the power settings for

each position separately. The hob will

remember your power settings next time

you activate the function. If there is a

power cut, the hob will restore the default

settings of the function.

Activating the function

To activate the function place the cookware

in the correct position on the cooking area.

Touch . The indicator above the symbol

comes on. If you do not place the cookware

on the cooking area comes on and after 2

minutes the exible induction cooking area

is set to .

Deactivating the function

To deactivate the function touch or set

the power setting to . The indicator above

the symbol goes o.

Cooking table

Heat setting Use to: Time

(min)

Hints

1 Keep cooked food warm. as nec‐

essary

Put a lid on the cookware.

1 - 2 Hollandaise sauce, melt: butter,

chocolate, gelatine.

5 - 25 Mix from time to time.

1 - 2 Solidify: uy omelettes, baked

eggs.

10 - 40 Cook with a lid on.

2 - 3 Simmer rice and milkbased

dishes, heat up ready-cooked

meals.

25 - 50 Add at least twice as much liq‐

uid as rice, mix milk dishes

halfway through the proce‐

dure.

3 - 4 Steam vegetables, sh, meat. 20 - 45 Add a couple of tablespoons of

liquid.

4 - 5 Steam potatoes. 20 - 60 Use max. ¼ l of water for 750 g

of potatoes.

4 - 5 Cook larger quantities of food,

stews and soups.

60 - 150 Up to 3 l of liquid plus ingredi‐

ents.

ENGLISH 19

Heat setting Use to: Time

(min)

Hints

6 - 7 Gentle fry: escalope, veal cor‐

don bleu, cutlets, rissoles, saus‐

ages, liver, roux, eggs, pan‐

cakes, doughnuts.

as nec‐

essary

Turn halfway through.

7 - 8 Heavy fry, hash browns, loin

steaks, steaks.

5 - 15 Turn halfway through.

9 Boil water, cook pasta, sear meat (goulash, pot roast), deep-fry chips.

Boil large quantities of water. Booster is activated.

The data in the table is for

guidance only.

Cookware guidance

Warning! Refer to Safety

chapters.

What pots to use

Only use cookware which is suitable for

induction hobs. The cookware must be made

of a ferromagnetic material, such as:

• cast iron;

• enamelled steel;

• carbon steel;

• stainless steel (most types);

• aluminium with ferromagnetic coating or

a ferromagnetic plate.

To determine if a pot or pan is suitable,

check for the symbol

(usually stamped on

the bottom of the cookware). You can also

hold a magnet to the bottom. If it clings to

the underside, the cookware will work on the

induction hob.

To ensure optimum eciency, always use

pots and pans with a at bottom that

distributes the heat evenly. If the bottom is

uneven, this will aect power and heat

conduction.

How to use

Minimum diameter of pot / pan base for

the dierent cooking areas

To ensure that the hob operates properly,

the cookware must have a suitable minimum

diameter as well as cover one or more of the

reference points indicated on the surface of

the hob.

Always use the cooking zone that best

corresponds to the diameter of the bottom

of the cookware.

Cooking zone Cookware diame‐

ter [mm]

Flexible induction

cooking area

100

1)

Middle front 125 - 210

Right rear 125 - 180

Right front 125 - 180

1) Minimum diameter of pot / pan base for a single

section.

ENGLISH 20

La page charge ...

IKEA BLIXTSNABB Manuel utilisateur

IKEA BLIXTSNABB Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents