DDLS 3790
5019 100 75022/A
1.
Control panel
2.
Grease filter
3.
Halogen lamp
4.
Telescopic flue
CLEANING THE GREASE FILTER:
Clean the grease filter once a month and
whenever the grease filter change indicator
flashes (Extraction speed indicator
2
).
1.
Unplug the appliance or switch off the mains
power supply.
2.
Remove the grease filter.
- push the handles backwards;
- and then pull downwards.
3.
After cleaning the grease filter repeat the
above steps in reverse to reassemble,
making sure the entire extraction surface is
covered.
Grease filter change indicator reset:
Press the extraction
OFF button for three
seconds.
The grease filter
change indicator will
stop flashing.
RENEWING BULBS
1.
Unplug the appliance or switch off the mains
power supply.
2.
Unscrew the lighting unit.
3.
Remove the burn-out bulb and insert a
new one.
Use only 20W max halogen bulbs.
4.
Screw the lighting unit back in place.
MOUNTING OR RENEWING THE
CARBON FILTER:
1.
Unplug the appliance or switch off the mains
power supply.
2.
Remove the grease filters.
3.
Fit the carbon filter, fixing it with the two
screws supplied.
4.
If the carbon filter needs renewing, remove it
and fit a new one.
5.
Refit the grease filters.
CONTROL PANEL
1.
Speed decrease button - 0 ➪ 5.
2.
Extraction OFF button.
3.
Extraction ON speed increase button - 0 ➪ 5
4.
Extraction speed indicator
1
5.
Extraction speed indicator
2
and grease filter
change indicator (when flashing).
6.
Extraction speed indicator
3
7.
Extraction speed indicator
4
8.
Extraction speed indicator
5
9.
Intensive extraction speed indicator
10.
Timer intensive speed button.
The hood operates at this speed for 5
minutes and then returns to the previous
settings.
This function can be cancelled by pressing
button 1, 2 or 3.
11.
Light ON-OFF switch.
1
4
2
3
2
2
3
1
2
3
4
5
6
7
8
9
10
11
PRODUCT DESCRIPTION SHEET
F NL E PGBD GRI
75022a.fm5 Page 4 Tuesday, February 29, 2000 12:35 PM