Getting Started
Modem Blaster
V.90 External
Information in this document is subject to change without notice and does not represent a commitment on the part of Digicom Systems Inc. or Creative
Technology Ltd. The software described in this document is furnished under a license agreement and may be used or copied only in accordance with the terms
of the license agreement. It is against the law to copy the software on any other medium except as specifically allowed in the license agreement. The licensee
may make one copy of the software for backup purposes. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, for any purpose without the written permission of Digicom Systems Inc.
Copyright © 1999 by Creative Technology Ltd. All rights reserved.
Version 1.00
August 1999
Modem Blaster is a trademark of Creative Technology Ltd.
IBM is a registered trademark of International Business Machines Corporation.
Microsoft, MS-DOS, Windows, and the Windows logo are registered trademarks of Microsoft Corporation.
Hayes is a registered trademark of Hayes Microcomputer Products, Inc.
Touch-Tone is a registered trademark of AT&T.
All other products are trademarks or registered trademarks of their respective owners.
mb5625.book Page i Tuesday, October 19, 1999 2:41 PM
Creative End-User Software License Agreement
Version 2.0, June 1998
PLEASE READ THIS DOCUMENT CAREFULLY BEFORE USING THE SOFTWARE. BY USING THE SOFTWARE, YOU AGREE TO BE BOUND BY THE TERMS OF THIS AGREEMENT. IF YOU DO NOT
AGREE TO THE TERMS OF THE AGREEMENT, DO NOT OPEN THE SEALED DISK PACKAGE, INSTALL OR USE THE SOFTWARE. PROMPTLY RETURN, WITHIN 15 DAYS, THE SOFTWARE, ALL
RELATED DOCUMENTATION AND ACCOMPANYING ITEMS TO THE PLACE OF ACQUISITION FOR A FULL REFUND.
This is a legal agreement between you and
Creative Technology Ltd.
and its subsidiaries (“Creative”). This Agreement states the terms and
conditions upon which Creative offers to license the software sealed
in the disk package together with all related documentation and
accompanying items including, but not limited to, the executable
programs, drivers, libraries and data files associated with such
programs (collectively, the “Software”).
LICENSE
1.
Grant of License
The Software is licensed, not sold, to you for use only under the
terms of this Agreement. You own the disk or other media on
which the Software is originally or subsequently recorded or fixed;
but, as between you and Creative (and, to the extent applicable, its
licensors), Creative retains all title to and ownership of the
Software and reserves all rights not expressly granted to you.
2.
For Use on a Single Computer
The Software may be used only on a single computer by a single
user at any time. You may transfer the machine-readable portion of
the Software from one computer to another computer, provided
that (a) the Software (including any portion or copy thereof) is
erased from the first computer and (b) there is no possibility that
the Software will be used on more than one computer at a time.
3.
Stand-Alone Basis
You may use the Software only on a stand-alone basis, such that
the Software and the functions it provides are accessible only to
persons who are physically present at the location of the computer
on which the Software is loaded. You may not allow the Software
or its functions to be accessed remotely, or transmit all or any
portion of the Software through any network or communication
line.
4.
Copyright
The Software is owned by Creative and/or its licensees and is
protected by United States copyright laws and international treaty
provisions. You may not remove the copyright notice from any
copy of the Software or any copy of the written materials, if any,
accompanying the Software.
5.
One Archival Copy
You may make one (1) archival copy of the machine-readable
portion of the Software for backup purposes only in support of
your use of the Software on a single computer, provided that you
reproduce on the copy all copyright and other proprietary rights
notices included on the originals of the Software.
6.
No Merger or Integration
You may not merge any portion of the Software into, or integrate
any portion of the Software with, any other program, except to the
extent expressly permitted by the laws of the jurisdiction where
you are located. Any portion of the Software merged into or
integrated with another program, if any, will continue to be subject
to the terms and conditions of this Agreement, and you must
reproduce on the merged or integrated portion all copyright and
other proprietary rights notices included in the originals of the
Software.
7.
Network Version
If you have purchased a “network” version of the Software, this
Agreement applies to the installation of the Software on a single
“file server”. It may not be copied onto multiple systems. Each
“node” connected to the “file server” must also have its own
license of a “node copy” of the Software, which becomes a license
only for that specific “node”.
8.
Transfer of License
You may transfer your license of the Software, provided that (a)
you transfer all portions of the Software or copies thereof, (b) you
do not retain any portion of the Software or any copy thereof, and
(c) the transferee reads and agrees to be bound by the terms and
conditions of this Agreement.
9.
Limitations on Using, Copying, and Modifying the Software
Except to the extent expressly permitted by this Agreement or by
the laws of the jurisdiction where you acquired the Software, you
may not use, copy or modify the Software. Nor may you sub-
license any of your rights under this Agreement.
10.
Decompiling, Disassembling, or Reverse Engineering
You acknowledge that the Software contains trade secrets and
other proprietary information of Creative and its licensors. Except
to the extent expressly permitted by this Agreement or by the laws
of the jurisdiction where you are located, you may not decompile,
disassemble or otherwise reverse engineer the Software, or engage
in any other activities to obtain underlying information that is not
visible to the user in connection with normal use of the Software.
In particular, you agree not for any purpose to transmit the
Software or display the Software's object code on any computer
screen or to make any hardcopy memory dumps of the Software's
object code. If you believe you require information related to the
interoperability of the Software with other programs, you shall not
decompile or disassemble the Software to obtain such information,
and you agree to request such information from Creative at the
address listed below. Upon receiving such a request, Creative shall
determine whether you require such information for a legitimate
purpose and, if so, Creative will provide such information to you
within a reasonable time and on reasonable conditions.
In any event, you will notify Creative of any information derived
from reverse engineering or such other activities, and the results
thereof will constitute the confidential information of Creative that
may be used only in connection with the Software.
TERMINATION
The license granted to you is effective until terminated. You may
terminate it at any time by returning the Software (including any
portions or copies thereof) to Creative. The license will also terminate
automatically without any notice from Creative if you fail to comply
with any term or condition of this Agreement. You agree upon such
termination to return the Software (including any portions or copies
thereof) to Creative. Upon termination, Creative may also enforce any
rights provided by law. The provisions of this Agreement that protect
the proprietary rights of Creative will continue in force after
termination.
LIMITED WARRANTY
Creative warrants, as the sole warranty, that the disks on which the
Software is furnished will be free of defects, as set forth in the
Warranty Card or printed manual included with the Software. No
distributor, dealer or any other entity or person is authorized to expand
or alter this warranty or any other provisions of this Agreement. Any
representation, other than the warranties set forth in this Agreement,
will not bind Creative.
Creative does not warrant that the functions contained in the Software
will meet your requirements or that the operation of the Software will
be uninterrupted, error-free or free from malicious code. For purposes
of this paragraph, “malicious code” means any program code
designed to contaminate other computer programs or computer data,
consume computer resources, modify, destroy, record, or transmit
data, or in some other fashion usurp the normal operation of the
computer, computer system, or computer network, including viruses,
Trojan horses, droppers, worms, logic bombs, and the like.
EXCEPT
AS STATED ABOVE IN THIS AGREEMENT, THE
SOFTWARE IS PROVIDED AS-IS WITHOUT WARRANTY
OF ANY KIND, EITHER EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE. CREATIVE IS NOT
OBLIGATED TO PROVIDE ANY UPDATES, UPGRADES OR
TECHNICAL SUPPORT FOR THE SOFTWARE.
mb5625.book Page ii Tuesday, October 19, 1999 2:41 PM
Further, Creative shall not be liable for the accuracy of any
information provided by Creative or third party technical support
personnel, or any damages caused, either directly or indirectly, by acts
taken or omissions made by you as a result of such technical support.
You assume full responsibility for the selection of the Software to
achieve your intended results, and for the installation, use and results
obtained from the Software. You also assume the entire risk as it
applies to the quality and performance of the Software. Should the
Software prove defective, you (and not Creative, or its distributors or
dealers) assume the entire cost of all necessary servicing, repair or
correction.
This warranty gives you specific legal rights, and you may also have
other rights which vary from country/state to country/state. Some
countries/states do not allow the exclusion of implied warranties, so
the above exclusion may not apply to you. Creative disclaims all
warranties of any kind if the Software was customized, repackaged or
altered in any way by any third party other than Creative.
LIMITATION OF REMEDIES AND DAMAGES
THE ONLY REMEDY FOR BREACH OF WARRANTY WILL
BE THAT SET FORTH IN THE WARRANTY CARD OR
PRINTED MANUAL INCLUDED WITH THE SOFTWARE. IN
NO EVENT WILL CREATIVE OR ITS LICENSORS BE
LIABLE FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR
CONSEQUENTIAL DAMAGES OR FOR ANY LOST
PROFITS, LOST SAVINGS, LOST REVENUES OR LOST
DATA ARISING FROM OR RELATING TO THE SOFTWARE
OR THIS AGREEMENT, EVEN IF CREATIVE OR ITS
LICENSORS HAVE BEEN ADVISED OF THE POSSIBILITY
OF SUCH DAMAGES. IN NO EVENT WILL CREATIVE’S
LIABILITY OR DAMAGES TO YOU OR ANY OTHER
PERSON EVER EXCEED THE AMOUNT PAID BY YOU TO
USE THE SOFTWARE, REGARDLESS OF THE FORM OF
THE CLAIM.
Some countries/states do not allow the limitation or exclusion of
liability for incidental or consequential damages, so the above
limitation or exclusion may not apply to you.
PRODUCT RETURNS
If you must ship the software to Creative or an authorized Creative
distributor or dealer, you must prepay shipping and either insure the
software or assume all risk of loss or damage in transit.
U.S. GOVERNMENT RESTRICTED RIGHTS
All Software and related documentation are provided with restricted
rights. Use, duplication or disclosure by the U.S. Government is
subject to restrictions as set forth in subdivision (b)(3)(ii) of the
Rights in Technical Data and Computer Software Clause at 252.227-
7013. If you are sub-licensing or using the Software outside of the
United States, you will comply with the applicable local laws of your
country, U.S. export control law, and the English version of this
Agreement.
CONTRACTOR/MANUFACTURER
The Contractor/Manufacturer for the Software is:
Creative Technology Ltd
31, International Business Park
Creative Resource
Singapore 609921
GENERAL
This Agreement is binding on you as well as your employees,
employers, contractors and agents, and on any successors and
assignees. Neither the Software nor any information derived
therefrom may be exported except in accordance with the laws of the
U.S. or other applicable provisions. This Agreement is governed by
the laws of the State of California (except to the extent federal law
governs copyrights and federally registered trademarks). This
Agreement is the entire agreement between us and supersedes any
other understandings or agreements, including, but not limited to,
advertising, with respect to the Software. If any provision of this
Agreement is deemed invalid or unenforceable by any country or
government agency having jurisdiction, that particular provision will
be deemed modified to the extent necessary to make the provision
valid and enforceable, and the remaining provisions will remain in
full force and effect.
For questions concerning this Agreement, please contact Creative at
the address stated above. For questions on product or technical
matters, contact the Creative technical support center nearest you.
ADDENDUM TO THE MICROSOFT SOFTWARE LICENSE
AGREEMENT (WINDOWS 95)
IMPORTANT: By using the Microsoft software files (the “Microsoft
Software”) provided with this Addendum, you are agreeing to be
bound by the following terms. If you do not agree to be bound by these
terms, you may not use the Microsoft Software.
The Microsoft Software is provided for the sole purpose of replacing
the corresponding files provided with a previously licensed copy of
the Microsoft software product identified above (“ORIGINAL
PRODUCT”). Upon installation, the Microsoft Software files become
part of the ORIGINAL PRODUCT and are subject to the same
warranty and license terms and conditions as the ORIGINAL
PRODUCT. If you do not have a valid license to use the ORIGINAL
PRODUCT, you may not use the Microsoft Software. Any other use
of the Microsoft Software is prohibited.
SPECIAL PROVISIONS APPLICABLE TO THE EUROPEAN
UNION
IF YOU ACQUIRED THE SOFTWARE IN THE EUROPEAN
UNION (EU), THE FOLLOWING PROVISIONS ALSO APPLY
TO YOU. IF THERE IS ANY INCONSISTENCY BETWEEN THE
TERMS OF THE SOFTWARE LICENSE AGREEMENT SET OUT
EARLIER AND IN THE FOLLOWING PROVISIONS, THE
FOLLOWING PROVISIONS SHALL TAKE PRECEDENCE.
DECOMPILATION
You agree not for any purpose to transmit the Software or display the
Software’s object code on any computer screen or to make any hard
copy memory dumps of the Software’s object code. If you believe you
require information related to the interoperability of the Software with
other programs, you shall not decompile or disassemble the Software
to obtain such information, and you agree to request such information
from Creative at the address listed earlier. Upon receiving such a
request, Creative shall determine whether you require such
information for a legitimate purpose and, if so, Creative will provide
such information to you within a reasonable time and on reasonable
conditions.
LIMITED WARRANTY
EXCEPT AS STATED EARLIER IN THIS AGREEMENT, AND
AS PROVIDED UNDER THE HEADING “STATUTORY
RIGHTS”, THE SOFTWARE IS PROVIDED AS-IS WITHOUT
WARRANTY OF ANY KIND, EITHER EXPRESS OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY
IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY, QUALITY AND FITNESS FOR A
PARTICULAR PURPOSE.
LIMITATION OF REMEDY AND DAMAGES
THE LIMITATIONS OF REMEDIES AND DAMAGES IN THE
SOFTWARE LICENSE AGREEMENT SHALL NOT APPLY
TO PERSONAL INJURY (INCLUDING DEATH) TO ANY
PERSON CAUSED BY CREATIVE’S NEGLIGENCE AND
ARE SUBJECT TO THE PROVISION SET OUT UNDER THE
HEADING “STATUTORY RIGHTS”.
STATUTORY RIGHTS
Irish law provides that certain conditions and warranties may be
implied in contracts for the sale of goods and in contracts for the
supply of services. Such conditions and warranties are hereby
excluded, to the extent such exclusion, in the context of this
transaction, is lawful under Irish law. Conversely, such conditions and
warranties, insofar as they may not be lawfully excluded, shall apply.
Accordingly nothing in this Agreement shall prejudice any rights that
you may enjoy by virtue of Sections 12, 13, 14 or 15 of the Irish Sale
of Goods Act 1893 (as amended).
GENERAL
This Agreement is governed by the laws of the Republic of Ireland.
The local language version of this agreement shall apply to Software
acquired in the EU. This Agreement is the entire agreement between
us, and you agree that Creative will not have any liability for any
untrue statement or representation made by it, its agents or anyone
else (whether innocently or negligently) upon which you relied upon
entering this Agreement, unless such untrue statement or
representation was made fraudulently.
mb5625.book Page iii Tuesday, October 19, 1999 2:41 PM
6DIHW\5HJXODWRU\,QIRUPDWLRQ
CAUTION: Always disconnect modem board (the one with the
telephone plug/jack) from telephone system when installing or when
covers are removed from the host product.
This card is intended to be installed in a CSA/UL certified equipment
in the field by the user in manufacturer-defined operator access area.
Check the equipment operating/installation instructions and/or
equipment manufacturer to verify/confirm if your equipment is
suitable for user-installed application cards.
ATTENTION: Toujours débrancher la ligne téléphonique de la carte
modem (munie d’une prise ou d’une fiche) avant de procéder à
l’installation dans l’appareil ou lorsque le couvercle de celui-ci est
retiré.
Ce carte est destiné à être installé par l’utilisateur, sur place et à
l’intérieur de la zone définie par le fabricant, dans un appareil certifié
CSA/UL. Consulter le mode d’emploi ou le fabricant de l’appareil
pour vérifier ou confirmer si l’utilisateur peut y installer lui-même des
cartes périphériques.
5HJXODWRU\,QIRUPDWLRQ
The following sections contain regulatory notices for the USA and
Canada.
1RWLFHIRUWKH86$
FCC Part 15: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try one or more of the following measures:
❑ Reorient or relocate the receiving antenna.
❑ Increase the distance between the equipment and receiver.
❑ Connect the equipment to an outlet on a circuit different from
that to which the receiver is connected.
❑ Consult the dealer or an experienced radio/TV technician.
CAUTION: To comply with the limits for the Class B digital device,
pursuant to Part 15 of the FCC Rules, this device must be installed in
computer equipment certified to comply with the Class B limits.
All cables used to connect the computer and peripherals must be
shielded and grounded. Operation with non-certified computers or
non-shielded cables may result in interference to radio or television
reception.
0RGLILFDWLRQV
Any changes or modifications not expressly approved by the grantee
of this device could void the user’s authority to operate the device..
1RWLFHIRU&DQDGD
This apparatus complies with the Class “B” limits for radio
interference as specified in the Canadian Department of
Communications Radio Interference Regulations.
Cet appareil est conforme aux normes de CLASSE “B” d’interference
radio tel que spe’cifie’ par le Ministère Canadien des
Communications dans les règlements d’interfe’rence radio.
)&&5HJLVWUDWLRQ,QIRUPDWLRQ
IRU8VHUV
This product is compliant and registered with the CFR47-Part 68 of
the Federal Communications Commission (FCC). The FCC requires
us to provide you with the following information:
❑ Connection to the nationwide telephone network should be
made by using standard modular telephone jacks, type RJ11.
❑ This equipment may not be used with Party Line Service or with
Coin Telephone Lines.
❑ You should provide the FCC registration number and Ringer
Equivalent Number (REN) of this product to your telephone
company. The REN is useful to determine the number of
devices you may connect to your telephone line and still have
all of these ring when your telephone number is called.
❑ If your telephone equipment causes harm to the telephone
network, the telephone company may discontinue your service
temporarily. If possible, they will notify you in advance. If
advance notice is not practical, you will be notified as soon as
possible. You will have an opportunity to correct the problem,
and you will be informed of your right to file a complaint with
the FCC. Your telephone company may make changes in its
facilities, equipment, operations or procedures that could affect
the proper functioning of your product. If such changes are
planned, you will be notified in advance.
❑ If it is determined that the equipment still fails to operate
properly, the FCC requires that the unit be disconnected from
the telephone line until the problem has been corrected. Repair
to this equipment can only be made by the manufacturer, its
authorized agents, or others who are authorized by the FCC.
)D[%UDQGLQJ
In order to program fax branding information into your fax machine,
you should:
1. Refer to the instructions in the User Reference Manual for
your communications software.
2. Set up the identification information in your
communications software.
mb5625.book Page iv Tuesday, October 19, 1999 2:41 PM
,QGXVWU \&DQDGD1RWLFH
The Industry Canada label identifies certified equipment. This
certification means that the equipment meets certain protective,
operational, and safety requirements of telecommunications network.
The Department does not guarantee the equipment will operate to the
user’s satisfaction.
Before installing this equipment, users should ensure that it is
permissible to be connected to the facilities of the local
telecommunications company. The equipment must also be installed
using an acceptable method of connection. The customer should be
aware that compliance with the above conditions may not prevent
degradation of service in some situations.
Repairs to certified equipment should be made by an authorized
Canadian maintenance facility designated by the supplier. Any
repairs or alterations made by the user to this equipment, or equipment
malfunctions, may give the telecommunications company cause to
request the user to disconnect the equipment.
For their own protection, users should ensure that the electrical
ground connections of the power utility, telephone lines and internal
metallic water pipe system, if present, are connected together. This
precaution may be particularly important in rural areas.
CAUTION: Users should not attempt to make such connections
themselves, but should contact the appropriate electric inspection
authority, or electrician, as appropriate.
1RWLFH
The Load Number (LN) assigned to each terminal device denotes the
percentage of the total load to be connected to a telephone loop which
is used by the device, to prevent overloading. The termination on a
loop may consist of any combination of devices subject only to the
requirement that the sum of the Load Numbers of all devices does not
exceed 100.
/·eWLTXHWWHGX0LQLVWqUHGHV
,QGXVWULHVGX&DQDGD
L’Étiquette du Ministère des Industries du Canada identifie le matériel
homologué. Cette étiquette certifie que le matériel est conforme à
certaines normes de protection, d’exploitation et de sécurité des
réseaux de télécommunications. Le Ministère n’assure toutefois pas
que le matériel fonctionnera à la satisfaction de l’utilisateur. Avant
d’installer ce matériel, l’utilisateur doit s’assurer qu’il est permis de
le raccorder aux installations de l’entreprise locale de
télécommunication. Le matériel doit également être installé en
suivant une méthode acceptée de raccordement. L’abonné ne doit pas
oublier qu’il est possible que la conformité aux conditions énoncées
ci-dessus n’empêche pas la dégradation du service dans certaines
situations. Les réparations de matériel homologué doivent être
effectuées par un centre d’entretien canadien autorisé désigné par le
fournisseur. La compagnie de télécommunications peut demander à
l’utilisateur de débrancher un appareil à la suite de réparations ou de
modifications effectuées par l’utilisateur ou à cause de mauvais
fonctionnement. Pour sa propre protection, l’utilisateur doit s’assurer
que tous les fils de mise à la terre de la source d’énergie électrique,
des lignes téléphoniques et des canalizations d’eau métalliques, s’il y
en a, sont raccordé ensemble. Cette précaution est particulièrement
importante dans les régions rurales.
AVERTISSEMENT: L’utilisateur ne doit pas tenter de faire ces
raccordements lui-même; il doit avoir recours à un service
d’inspection des installations électriques, ou à un électricien, selon le
cas.
$YLV
L’indice de charge (IC) assigné à chaque dispositif terminal indique,
pour éviter toute surcharge, le pourcentage de la charge totale qui peut
être raccordê à un circuit têlêphonique bouclê utilisê par ce dispositif.
La terminaison du circuit bouclé peut être constituée de n’importe
quelle combinaison de dispositifs, pourvu que la somme des indices
de charge de l’ensemble des dispositifs ne dépasse pas 100.
mb5625.book Page v Tuesday, October 19, 1999 2:41 PM
mb5625.book Page vi Tuesday, October 19, 1999 2:41 PM
vii
Contents
,QWURGXFWLRQ
Before You Begin.....................................................................................................................xi
Recording Model and Serial Numbers.......................................................................xi
Checking System Requirements.................................................................................xi
Document Conventions............................................................................................. xii
,QVWDOOLQJWKH0RGHP
On Your Modem...................................................................................................................1-1
Setting up the Modem...........................................................................................................1-2
Connecting Telephone Line and Phone Set.........................................................................1-3
About Your Telephone Line.....................................................................................1-3
,QVWDOOLQJ6RIWZDUH
Installing Software in Windows 98......................................................................................2-2
Installing the Software in Windows 95................................................................................2-6
Installing Software in Windows NT 4.0 ..............................................................................2-8
Installing Software in Windows 3.1x................................................................................... 2-9
Testing the installation in Windows 95/98.........................................................................2-10
Uninstalling in Windows 95/98..........................................................................................2-10
mb5625.book Page vii Tuesday, October 19, 1999 2:41 PM
viii
$SSHQGL[HV
$ *HQHUDO6SHFLILFDWLRQV
.......................................................................................A-1
% 7URXEOHVKRRWLQJ
Problems Encountered..........................................................................................................B-1
Problems Encountered in Windows NT4.0 ............................................................B-3
Resolving Hardware Conflicts.............................................................................................B-4
In Windows 95/98....................................................................................................B-4
In Windows 3.1x.......................................................................................................B-4
General Q&A........................................................................................................................B-5
& 6HUYLFHDQG:DUUDQW\,QIRUPDWLRQ
Warranty Information...........................................................................................................C-3
Modem Blaster Product Registration Card.........................................................................C-5
mb5625.book Page viii Tuesday, October 19, 1999 2:41 PM
ix
Introduction
Welcome to the Modem Blaster! World. Your new modem allows you to fax documents, transfer
data and access online information easily from your computer. Some of the features of your
Modem Blaster are:
Plug and Play
This feature allows you to install the Modem Blaster easily, as the resources are assigned
automatically by the Plug and Play configuration manager.
Send and Receive faxes
You can use your Modem Blaster to send and receive fax documents. It can also be configured
to serve as a fax-on-demand system using the provided communication software.
Internet Access
Modem Blaster allows you to access computer bulletin boards and browse the internet at a
speeds of up to 56 Kbps(max.).
mb5625.book Page ix Tuesday, October 19, 1999 2:41 PM
x
Answering Machine
Using the provided communication software, your Modem Blaster can function as an
answering machine with multiple mail boxes. Remote users can leave messages in your mail
box, and you can play back these messages at any time. The Modem Blaster can even page you
to notify you of new messages!
Caller ID
The modem displays phone numbers of the calling parties if your phone is Caller-ID enabled.
Video Conferencing
Your Modem Blaster comes complete with V.80 standard support for use with H.32x video
conferencing systems.
mb5625.book Page x Tuesday, October 19, 1999 2:41 PM
xi
Before You Begin
This section provides information you should know before using this manual.
❑ Recording Model and Serial Numbers
❑ Checking System Requirements
❑ Document Conventions
Recording Model and
Serial Numbers
Your modem has a model number and a serial number. You can find them on the bottom of
your Modem Blaster V.90 External hardware unit. After removing the modem from its
packaging, note down its model and serial numbers for future reference.
Checking System
Requirements
The following are the minimum system requirements:
❑ Available Serial Port
❑ 486DX or higher IBM compatible PC
❑ 20 MB of free hard disk space
❑ 8 MB or higher of system memory (16 MB recommended)
❑ Windows 95/98, Windows NT4.0, Windows 3.1x and DOS
❑ CD-ROM drive for modem and communication software installation
Some supplied software will only
run in Windows 95/98/NT.
Modem Blaster must be connected
to an analog telephone line, also
called a POTS (Plain Old
Telephone Service) line.
mb5625.book Page xi Tuesday, October 19, 1999 2:41 PM
xii
Document
Conventions
This manual uses the following conventions to help you locate and identify the information that
you need.
Table i: Document conventions
Text Element Use
bold Text that must be entered exactly as it appears.
italic
Title of a book or a placeholder. A placeholder represents
information that you must provide.
UPPERCASE Directory name, file name, or acronym.
< > Symbols, letters, and key names on the keyboard.
This notepad icon indicates information that is of particular
importance and should be considered before continuing.
This alarm clock icon indicates that failure to adhere to direc-
tions may result in loss of data or damage to your system.
The warning sign indicates that failure to adhere to directions
may result in bodily harm or life-threatening situations.
mb5625.book Page xii Tuesday, October 19, 1999 2:41 PM
Installing the Modem 1-1
1
Installing the Modem
This chapter guides you through the process of setting up your modem. It is organized as
follows:
❑ On Your Modem
❑ Setting up the Modem
❑ Connecting Telephone Line and Phone Set
On Your Modem
This section describes the jacks and connectors of the modem.
Telephone Line jack
The Telephone Line jack allows you to connect a telephone line for data and fascimile
transmission.
Phone jack
The Phone jack allows you to connect a phone set to the modem.
This jack is only applicable to countries that follow the United States’ standard such as Mexico
and Canada.
Power jack
The Power jack allows you to connect an external power adapter to your modem.
RS232 Connector
The RS232 connector allows you to connect the modem to a computer serial port.
Place the modem in front of you as
you go through this chapter. This
will help you identify the various
components of your modem.
mb5625.book Page 1 Tuesday, October 19, 1999 2:41 PM
1-2 Installing the Modem
Setting up the
Modem
1. Switch off your system and unplug the power cord from the wall outlet.
2. Connect the Power adapter and the RS232 cable to the modem as shown in Figure 1-1.
3. Connect the Power adapter to a power outlet and the RS232 cable to the computer’s serial
port.
4. Switch on your modem.
Figure 1-1: Setting up the Modem
Telephone
Telephone
wall outlet
To a computer
serial port
Power adapter
Phone jack
Telephone Line jack
Power jack
RS232
Connector
mb5625.book Page 2 Tuesday, October 19, 1999 2:41 PM
Installing the Modem 1-3
Connecting
Telephone Line and
Phone Set
1. Locate the most convenient telephone wall outlet.
If a phone is already connected to it, unplug the telephone cable from the wall outlet.
2. Connect the telephone cable from the phone set to the Phone jack of the modem, as shown
in Figure 1-1.
3. Connect one end of the telephone cable to the wall outlet and the other end to the Telephone
Line jack of the Modem Blaster, as shown in Figure 1-1.
About Your
Telephone Line
To ensure that the modem functions properly, note that:
❑ Your modem may not be used on “party lines”, toll or coin-operated lines.
Contact your local telephone company for help if you are not sure about the suitability of
your telephone line.
❑ This modem is intended for use on an analog telephone line, also known as a POTS (Plain
Old Telephone Service) line. You cannot connect the modem directly to a digital telephone
line, such as those commonly used in offices.
If you want to connect to a digital line, you need an analog converter compatible with the
telephone line you are using.
❑ Certain optional telephone features, such as the “message waiting” light or call waiting, are
not compatible with this modem. We therefore advise you not to enable these features.
In most areas, call waiting should be disabled on outgoing calls. If call waiting is enabled,
you may experience problems when transfering data with your modem.
mb5625.book Page 3 Tuesday, October 19, 1999 2:41 PM
mb5625.book Page 4 Tuesday, October 19, 1999 2:41 PM
Installing Software 2-1
2
Installing Software
This chapter provides instructions to install the modem drivers in Windows 95/98, Windows
NT 4.0 and Windows 3.1x. It also shows you how to test your installation and uninstall the
modem.
This chapter is organized as follows:
❑ Installing Software in Windows 98
❑ Installing the Software in Windows 95
❑ Installing Software in Windows NT 4.0
❑ Installing Software in Windows 3.1x
❑ Testing the installation in Windows 95/98
❑ Uninstalling in Windows 95/98
mb5625.book Page 1 Tuesday, October 19, 1999 2:41 PM
2-2 Installing Software
Installing Software
in Windows 98
1. Switch on your computer to allow the operating system to detect the modem.
2. When a dialog box similar to Figure 2-1 appears,
insert the
Installation CD
into your CD-ROM
drive and then click the Next button.
3. When a dialog similar to Figure 2-2 appears,
select the Search for the best driver for your
device (Recommended) option and click the
Next button.
Figure 2-1
Figure 2-2
mb5625.book Page 2 Tuesday, October 19, 1999 2:41 PM
Installing Software 2-3
4. When a dialog box similar to Figure 2-3 appears,
select Specify a location, click the Browse
button, and browse to the Drivers directory in the
Installation CD
.
5. Click the Next button.
6. When a dialog box similar to Figure 2-4 appears,
click the Next button.
Figure 2-3
Figure 2-4
mb5625.book Page 3 Tuesday, October 19, 1999 2:41 PM
2-4 Installing Software
7. When a dialog box similar to Figure 2-5 appears,
click the Finish button.
8. When a dialog box similar to Figure 2-6 appears,
click the Next button.
Figure 2-5
Figure 2-6
mb5625.book Page 4 Tuesday, October 19, 1999 2:41 PM
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
Creative V.90 External Manuel utilisateur
- Taper
- Manuel utilisateur
- Ce manuel convient également à
dans d''autres langues
- English: Creative V.90 External User manual
Documents connexes
-
Creative Blaster Modem Getting Started
-
-
-
-
-
-
-
Creative Labs SOUND BLASTER WORLD OF WARCRAFT HEADSET - Manuel utilisateur
-
Creative Labs BLASTER TRANSMITTER Manuel utilisateur
