Haier Beverage Dispenser HVFM20A Manuel utilisateur

Catégorie
Boissons glacées
Taper
Manuel utilisateur

Ce manuel convient également à

Wine Cooler
User Manual-
Guide de l’Utilisateur-
Manual del Usuario-
Model #’s
Modèles
Para Modelos de
Enfriador de Vino
Rafraîchisseur à Vin
HVFM20A
HVF020A
SAFETY PRECAUTIONS
Read all of the instructions before using this appliance.
When using this appliance, always exercise basic safety
precautions, including the following:
1) Use this appliance only for its intended purpose as described in this use
and care guide.
2) This wine cooler must be properly installed in accordance with the
installation instructions before it is used. See grounding instructions in the
installation section.
3) Never unplug your wine cooler by pulling on the power cord. Always
grasp the plug firmly and pull straight out from the outlet.
4) Repair or replace immediately, all electric service cords that have become
frayed or otherwise damaged. Do not use a cord that shows cracks or
abrasion damage along its length, the plug or the connector end.
5) Unplug your wine cooler before cleaning or before making any repairs.
Note:
If for any reason this product requires service, we strongly
recommend that a certified technician performs the service.
6) If your old wine cooler is not being used, we recommend that you remove
the door and leave the shelves in place. This will reduce the possibility
of danger to children.
7) This wine cooler should not be recessed or built-in an enclosed cabinet. It
is designed for freestanding installation only.
8) Do not operate your wine cooler in the presence of explosive fumes.
9) Do not store foods in wine cooler as interior temperature may not be cool
enough to prevent spoilage.
1
English
English
1
2
Thank you for using our Haier
product. This easy-to-use manual will
guide you in getting the best use of
your wine cooler.
Remember to record the model and
serial number. They are on a label in
back of the wine cooler.
Model number
Serial number
Date of purchase
Staple your receipt to your manual. You will need it to obtain
warranty service.
For Future Reference Please
SAVE THESE INSTRUCTIONS
DANGER
Risk of child entrapment. Before you throw away your old
wine cooler, take off the doors. Leave the shelves in place so
that children may not easily climb inside.
As per UL 250 11.2.6
English
English
2
Table Of Contents
PAGE
Safety Precautions ..........................................................................1
Parts And Features ..........................................................................4
Installing Your Wine Cooler ..........................................................5
Unpacking Your Wine Cooler..................................................................5
Leveling Your Wine Cooler......................................................................5
Proper Air Circulation ............................................................................5
Electrical Requirements............................................................................6
Wine Cooler
Features And Use ..........................................................7
Initial Set Up ..........................................................................................7
Temperature Adjustment..........................................................................7
Shelving ................................................................................................9
Interior Light ..........................................................................................9
Door Lock ..............................................................................................9
Normal Operating Sounds......................................................................9
Proper Wine Cooler Care and Cleaning....................................10
Cleaning and Maintenance ..................................................................10
Power Interruptions ..............................................................................11
Vacation and Moving Care ..................................................................11
Troubleshooting..............................................................................12
Warranty Information ..................................................................13
English
3
English
3
Parts And Features
1. White Wine Button (-)
2. Red Wine Button (+)
3. Interior Light Button (set)
4. LED Temperature Display
5. Light On/Off Switch
6. Door Lock and Key
7. Door Handle
8. Temperature Control
9. Adjustable Leveling Legs
(not shown)
10. 1 Slide-Out Basket
11. 3 Slide-Out Shelves
12. Interior Light
English
4
F
White
Red
Light
+
Set
1
2
3
4
6
5
8
7
Electronic Unit
123456789101112
HVFM20A
HVFO20A
10
Mechanical Unit
White
OFF
Mid Range
Coldest
Red
11
9
Mechanical Control
Unit Only
Electronic Controlled
Unit Only
12
English
4
1. Remove all packaging material. This includes the foam base and all
adhesive tape holding the wine cooler accessories inside and outside.
Slide out and remove plastic or foam guard used to secure the
compressor from shipping damage due to vibration and shock.
2. Inspect and remove any remains of packing, tape or printed
materials before powering on the wine cooler.
• Your wine cooler has four leveling legs which are located in the
front and rear corners of your wine cooler. After properly placing your
wine cooler in its final position, you can level your wine cooler.
• Leveling legs can be adjusted by turning them clockwise to raise your
wine cooler or by turning them counterclockwise to lower
your wine cooler. The wine cooler door will close easier when the
leveling legs are extended.
• To assure your wine cooler works at the maximum efficiency it
was designed for, you should install it in a location where there
is proper air circulation, plumbing and electrical connections.
• The following are recommended clearances around the wine cooler:
Sides……………2 "(50mm)
Top....................2" (50mm)
Back..................2" (50mm)
• Do not over fill your wine cooler for proper internal air circulation.
Installing Your Wine Cooler
Unpacking Your Wine Cooler
Proper Air Circulation
Leveling Your Wine Cooler
5
English
English
5
English
Electrical Requirement
• Make sure there is a suitable power Outlet (115 volts, 15 amps outlet)
with proper grounding to power the wine cooler.
• Avoid the use of three plug adapters or cutting off the third grounding in
order to accommodate a two plug outlet. This is a dangerous practice
since it provides no effective grounding for the wine cooler and may
result in shock hazard.
• Do not install your wine cooler in any location not properly insulated or
heated e.g. garage etc. Your wine cooler was not designed to operate
in temperature settings below 55˚ Fahrenheit.
• Select a suitable location for the wine cooler on a hard even
surface away from direct sunlight or heat source e.g. radiators,
baseboard heaters, cooking appliances etc. Any floor unevenness
should be corrected with the leveling legs located on the front and rear
bottom corners of the wine cooler.
• Your wine cooler is designed for free-standing installation only. It is not
designed for built-in application.
Install Limitations
6
English
6
Wine Cooler Features And Use
Electronic Controlled Units:
Once you have plugged the unit into an electrical outlet, let the unit run for
at least 30 minutes to acclimate itself before making any adjustments.
During this time the Red Wine light may stay on.
Mechanical Controlled Units:
The control for this is on the back of the unit. There are 6 settings
plus 0 (OFF). Initially set the temperature setting to 3. Let the unit run for at
least 30 minutes to acclimate itself before making any adjustments.
7
Initial Setup
Electronic Control Unit: See fig. # 1
• The wine cooler is preset from the factory to automatically
accommodate temperature requirements for red or white wines.
If you store mostly white wines, press the "White Wine" button and the
wine cooler will maintain an average temperature between
45˚ to 50˚ F. Pushing the "Red Wine" button will yield an
average temperature between 55˚ to 60˚ F.
• The wine cooler can be set to any temperature you desire to
accommodate your wine storage requirements. To set the temperature,
press both the "White Wine" and "Red Wine" buttons simultaneously
and hold for approximately 3 seconds. Now you are in temperature set
mode. Decrease the temperature by pushing the "White Wine" button
and increase the temperature by pressing the "Red Wine" button.
Pressing the appropriate button 3 times will adjust the temperature 3
degrees, press 4 times equals 4 degrees, 5 times equals 5 degrees, and
so on. Once you have selected the temperature you desire, push the
"Light/Set" button. Now the wine cooler is programmed and the LED
readout will return to current internal temperature reading.
Temperature Adjustments:
English
English
7
• There will be a 3 degree variance +/- between the temperature you
select and the temperature indicated on the LED readout.
This occurs because the wine cooler activates and deactivates
trying to maintain your desired temperature. There is often a
10˚ variance between the top and bottom shelves of the wine cooler.
Therefore, if you have set the wine cooler for 50˚ and have a
mix of red and white wines, you may want to put the white wine
on the bottom shelf where the temperature will be 45˚ F, and place the
red wine on the top shelf where the temperature will be 55˚ F.
Mechanical Control Unit: See fig. # 2
• Your wine cooler has a temperature control knob on the back of the
unit. There are 6 settings: 1 being the warmest and 6 being the coolest.
You can set the temperature of your wine cooler at any
setting you desire.
F
White
Red
Light
+
Set
fig. # 1
8
W
hite
OFF
Mid Range
Coldest
Red
fig. # 2
English
English
8
9
• The shelves are designed for flexibility and easy cleaning.
To accommodate different sized bottles the shelves slide out
and can be moved up or down into any of the tracks molded
into the cooler cabinet. Larger bottles or Magnums can be more easily
accommodated on the cross shelves of the bottom basket of the cooler.
You will notice that the shelves are designed so the bottles do
not line-up directly over one another. This allows free air
movement and provides more space.
• To complement the look of your wine collection, a soft light has been
built into the wine cooler. Simply push the "Light/Set" button on the
electronic controlled unit, and the light comes on, push again for off.
On the mechanical control units, the light switch is on the front for your
convenience. For maximum energy efficiency, leave light off when not
viewing your collection.
Shelving
Interior Light
• For safety and security, your wine cooler is equipped with a door lock.
To eliminate the risk of accidental child entrapment, the lock was
designed so that the door will not lock until the key is removed
(consistent with UL requirements).
• Boiling water, gurgling sounds or slight vibrations that are the result of
the refrigerant circulating through the cooling coils.
• The thermostat control will click when it cycles on and off.
Door Lock
(electronic controlled unit only)
Normal Operating Sounds You May Hear
English
English
9
Warning:
To avoid electric shock always unplug your
wine cooler before cleaning. Ignoring this warning
may result in death or injury.
Caution:
Before using cleaning products, always read and
follow manufacturer’s instructions and warnings to
avoid personal injury or product damage.
General:
• Prepare a cleaning solution of 3-4 tablespoons of
baking soda mixed with warm water. Use sponge or
soft cloth, dampened with the cleaning solution, to
wipe down your wine cooler.
• Rinse with clean warm water and dry with a soft cloth.
• Do not use harsh chemicals, abrasives, ammonia,
chlorine bleach,concentrated detergents, solvents or
metal scouring pads. SOME of these chemicals may
dissolve, damage and/or discolor your wine cooler.
• Clean door gaskets every three months according to
general instructions. Gaskets must be kept clean and
pliable to assure a proper seal.
• Petroleum jelly applied lightly on the hinge side of
gaskets will keep the gasket pliable and assure a
good seal.
Proper Wine Cooler Care and Cleaning
Cleaning and Maintenance
Door Gaskets:
10
English
English
10
• Occasionally there may be power interruptions due to
thunderstorms or other causes. Remove the power cord from AC outlet
when a power outage occurs. When power has been restored,
replug power cord to AC outlet.
• For long vacations or absences, unplug the wine cooler and clean the
wine cooler and door gaskets according to "General cleaning" section.
Prop doors open, so air can circulate inside. When moving always
move the wine cooler vertically. Do not move with the unit lying down.
Possible damage to the sealed system could occur.
Power Interruptions
Vacation and Moving Care
11
English
English
11
Wine Cooler Does Not Operate
• Check if wine cooler is plugged in.
• Check if there is power at the ac outlet, by checking the circuit breaker.
Wine appears too warm
• Frequent door openings.
• Allow time for recently added wine to reach desired temperature.
• Check gaskets for proper seal.
• Clean condenser coils.
• Adjust temperature control to colder setting.
Wine temperature is too cold
• If temperature control setting is too cold, adjust to a warmer setting.
Wine cooler runs too frequently
• This may be normal to maintain constant temperature during
high temperature and humid days.
• Doors may have been opened frequently or for an extended
period of time.
• Clean condenser coils.
• Check gasket for proper seal.
• Check to see if doors are completely closed.
Moisture build up on interior or exterior
of the wine cooler:
• This is normal during high humidity periods.
• Prolonged or frequent door openings.
• Check door gaskets for proper seal.
Wine Cooler door does not shut properly:
• Level the wine cooler.
• Check for blockages e.g. wine bottles, shelves.
TroubleShooting
12
English
English
12
Limited Warranty
What is covered and for how
long?
This warranty covers all defects in work-
manship or materials for a period of:
12 months labor
12 months parts
5 years sealed system
The warranty commences on the date
the item was purchased and the original
purchase receipt must be presented to
the authorized service center before
warranty repairs are rendered.
EXCEPTIONS: Commercial or
Rental Use warranty
90 days labor (carry-in only)
90 days parts
No other warranty applies
What is covered.
1. The mechanical and electrical parts,
which serve as a functional, purpose
of this appliance for a period of 12
months. This includes all parts except
finish, and trim.
2. The components of the sealed system
e.g. hermetic compressor, condenser
and evaporator from manufacturing
defects for a period of 5 years from
the date of purchase. Any damages
to such components caused by
mechanical abuse or improper
handling or shipping will not be
covered.
What will be done?
1. We will repair or replace, at our dis-
cretion any mechanical or electrical
part which proves to be defective in
normal usage during the warranty
period so specified.
2. There will be no charge to the
purchaser for parts and labor on any
covered items during the initial 12
month period. Beyond this period
only parts are covered in the remain-
ing warranty. Labor is not provided
and must be paid by the customer.
3. Contact your nearest authorized
service center. For the name of the
nearest service center please call
1-877-337-3639
THIS WARRANTY COVERS
APPLIANCES WITHIN THE
CONTINENTAL UNITED STATES,
PUERTO RICO AND CANADA.
IT DOES NOT COVER
THE FOLLOWING:
Damages from improper installation.
Damages in shipping.
Defects other than manufacturing.
Damage from misuse, abuse, accident,
alteration, lack of proper care and
maintenance or incorrect current or
voltage.
Damage from other than household use.
Damage from service by other than an
authorized dealer or service center.
Decorative trims or replaceable
light bulbs.
Transportation and shipping.
Labor (after the initial 12 months).
THIS LIMITED WARRANTY IS GIVEN IN
LIEU OF ALL OTHER WARRANTIES,
EXPRESSED OR, INCLUDING THE
WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR
PURPOSE
The remedy provided in this warranty is
exclusive and is granted in lieu of all
other remedies.
This warranty does not cover incidental
or consequential damages, so the above
limitations may not apply to you. Some
States do not allow limitations on how
long an implied warranty lasts, so the
above limitations may not apply to you.
This warranty gives you specific legal
rights, and you may have other rights,
which vary, from state to state.
Haier America Trading L.L.C.
New York, NY 10018.
English
13
English
13
Français
MESURES DE SECURITE
Lire l’ensemble des instructions avant d’utiliser l’appareil.
Lors de l’utilisation de cet appareil, prendre toutes les
mesures de sécurité de base, y compris les suivantes:
1) N’utiliser cet appareil que pour l’usage pour lequel il est prévu,
tel qu’il est indiqué dans le guide d’utilisation et d’entretien.
2)
Ce réfrigérateur à vin doit être installé correctement, selon les instructions
d'installation, avant d'être utilisé. Voir les instructions de mise à la terre
dans la section d'installation.
3)
Ne jamais débrancher le réfrigérateur à vin en tirant sur le cordon d'alimenta-
tion. Saisissez toujours la fiche fermement et la tirez-la directement de la prise de
courant.
4)
Réparez ou remplacez immédiatement tous les cordons d'alimentation qui sont
frangés ou endommagés. N'utilisez pas de cordon qui présente des fissures ou
de l'abrasion sur le fil ou aux extrémités.
5)
Débranchez votre réfrigérateur avant de le nettoyer ou d'en faire l'entretien
général. Note : N'essayez pas de faire les réparations vous-mêmes. Contactez
un agent de service qualifié pour toute réparation.
6)
Si vous remplacez un vieux réfrigérateur à vin, enlevez les portes avant de
l'entreposer ou de le jeter et laissez les étagères en place. Cela réduira les
dangers potentiels pour les enfants.
7)
Ce réfrigérateur à vin ne doit pas être suspendu ou encastré. Il est conçu pour
être installé de façon indépendante seulement (veuillez vous référer à la section
Installation pour de plus amples informations).
8)
Ne faites pas fonctionner le réfrigérateur à vin en présence
d'émanations explosives.
9) N'enregistrez pas les nourritures dans le refroidisseur
de vin car la température intérieure peut ne pas être assez
fraîche pour empêcher la détérioration
1
1
Français
Français
2
Aux fins de toute consultation ultérieure,
VEUILLEZ CONSERVER CES
INSTRUCTIONS
DANGER
Les enfants pourraient se retrouver coincés dans votre
réfrigérateur à vin usagé avant que vous ne puissiez vous en
débarrasser. Retirer les portes. Laisser les étagères en place
de manière à ce que les enfants ne
puissent pas grimper facilement à l’intérieur".
Conseils de l‚UL 250 11.2.6
Nous vous remercions d’avoir choisi
ce produit Haier. Ce guide
d’utilisation facile d’emploi permet
une utilisation optimum du
réfrigérateur á vin. Ne pas oublier
de prendre note du numéro de
modèle et de série. Ils sont inscrits
sur une plaquette apposée sur
l’arrière du
réfrigérateur à vin
.
Numéro de modèle
Numéro de série
Date d’achat
Agrafer le ticket de caisse au guide. Il devra être présenté pour tout
service après-vente sous garantie.
2
Français
3
Sommaire
PAGE
Mesures de Sécuriteé ......................................................................1
Pièces et Caractéristiques ..............................................................4
Installation du Réfrigératuer á Vin ..............................................5
Désemballage du Réfrigérateur á Vin ......................................................5
Réglage du Réfrigérateur á Vin ..............................................................5
Circulation d’Air Adéquate ....................................................................5
Caractéristiques Electriques ....................................................................5
Caractéristques du Réfrigérateur á Vin
........................................7
Montage Initial ......................................................................................7
Ajustements de Température....................................................................7
Tablettes ................................................................................................9
Lumière Intèrieure ..................................................................................9
Serrure de porte ....................................................................................9
Bruits de Fonctionnement lors d'une Exploitation Normale ........................9
Entretien et Nettoyage du Réfrigérateur á Vin
........................10
Nettoyage et Maintenance....................................................................10
Coupures de Courant ..........................................................................11
Entretien lors des Vacances ou d'un Déménagement ..............................11
Guide de Dépannage
........................................................................12
Garantie ..........................................................................................14
Français
3
Français
4
Piéces et Caractéristiques
1. Bouton pour le Vin Blanc (-)
2. Bouton pour le Vin Rouge (+)
3. Bouton de Lumière Intérieure (set)
4. Afficheur de Lumière
à Incandescence
5. Commutateur ‘On/Off’ léger
6. Serrure et Clé de la Porte
7. Béquille de porte
8. Commande de Température
9. Jambes de Mise à Niveau Réglables
(non illustrées)
10. 1 Panier Démontable
11. 3 Clayettes Amovibles
12.
Lumière Intèrieure
F
White
Red
Light
+
Set
1
2
3
4
6
5
8
7
Commande Electrique
123456789101112
HVFM20A
HVFO20A
10
Commande Mécanique
White
OFF
Mid Range
Coldest
Red
11
9
Commande
Mechanique Seulement
Commande
Electrique Seulement
12
Français
4
Français
5
1. Retirer l’ensemble du matériel d’emballage. Ceci comprend la base en
mousse ainsi que l’ensemble du matériel adhésif qui maintient les
accessoires du réfrigérateur à vin l'intérieur tout comme à l’extérieur.
Faire glisser et retirer la protection plastique ou en mousse servant à
préserver le compresseur de tout dommage causé par les vibrations
2. Inspecter et enlever tout restant d’emballage, de scotch ou de
matériaux imprimés avant de brancher le réfrigérateur à vin.
• Votre refroidisseur de vin a quatre jambes de mise à niveau qui sont
plac dans les coins avant et arrière de votre refroidisseur de vin.
• Pour régler les pieds de mise à niveau, les tourner dans le sens des
aiguilles d’une montre afin de surélever le réfrigérateur á vin et dans le
sens inverse des aiguilles d’une montre pour l’abaisser. La porte du
réfrigérateur á vin se ferme plus facilement lorsque les pieds de mise à
niveau sont surélevés.
• Pour être sûr que le réfrigérateur á vin fonctionne à son
maximum d'efficacité, l'installer dans un environnement
favorable à une bonne circulation d'air et possédant des
connexions de plomberie et d’électricité saines.
• Les indications suivantes concernent l’espace recommandé autour du
réfrigérateur á vin:
Latéralement...................50mm (2")
Partie supérieure.............50mm (2")
Arrière...........................50 mm (2")
• Ne remplissez pas au-dessus du niveau votre refroidisseur de vin pour
le circulaton interne approprié d'air.
Installation du Réfrigérateur á Vin
Désemballage du Réfrigérateur á Vin
Réglage du Réfrigérateur á Vin
Circulation d’Air Adéquate
Français
5
Français
6
• Pour l’alimentation du réfrigérateur á vin, veiller à utiliser
une prise de courant convenable (prise de 115 volts,15 amp)
raccordée à la terre.
• Eviter d’utiliser des adaptateurs à trois fiches ou de sectionner la
troisième fiche reliée à la terre dans le but d’utiliser un branchement à
deux fiches. Cette pratique pourrait s’avérer dangereuse
dans la mesure où le réfrigérateur á vin n’est pas relié convenablement
à la terre, et risquerait de causer des risques d’électrocution.
• Ne pas installer le réfrigérateur á vin dans un endroit qui n’est pas
convenablement isolé ou chauffé ; comme par exemple un garage, etc.
Le réfrigérateur á vin n’est pas conçu pour fonctionner à des
températures inférieures à 12°C.
• Choisir un endroit convenable et placer le réfrigérateur á vin sur une
surface solide et plane, loin de sources de chaleur telles que:
les radiateurs, les éléments chauffants à plinthes, les cuisinières, etc.
N'importe quelle inégalité de plancher devrait être corrigée avec
les jambes de mise à niveau plac sur les coins plan et arrière de
votre refroidisseur de vin.
• Votre refroidisseur de vin est conçu pour l'installation debout libre
seulement Il OS non conçu pour le bult dans l'application.
Caractéristiques Electriques
Limitations relatives à l’Installation
Français
6
Français
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43

Haier Beverage Dispenser HVFM20A Manuel utilisateur

Catégorie
Boissons glacées
Taper
Manuel utilisateur
Ce manuel convient également à