Haier HVF020ABB Manuel utilisateur

Marque: Haier

Modèle: HVF020ABB

Catégorie: Boissons glacées

Taper: Manuel utilisateur

Ce manuel convient également à

Wine Cooler

User Manual-

Guide de l’Utilisateur-

Manual del Usuario-

Model #’s

Modèles

Para Modelos de

Enfriador de Vino

Rafraîchisseur à Vin

HVFM20A

HVF020A

SAFETY PRECAUTIONS

Read all of the instructions before using this appliance.

When using this appliance, always exercise basic safety

precautions, including the following:

1) Use this appliance only for its intended purpose as described in this use

and care guide.

2) This wine cooler must be properly installed in accordance with the

installation instructions before it is used. See grounding instructions in the

installation section.

3) Never unplug your wine cooler by pulling on the power cord. Always

grasp the plug firmly and pull straight out from the outlet.

4) Repair or replace immediately, all electric service cords that have become

frayed or otherwise damaged. Do not use a cord that shows cracks or

abrasion damage along its length, the plug or the connector end.

5) Unplug your wine cooler before cleaning or before making any repairs.

Note:

If for any reason this product requires service, we strongly

recommend that a certified technician performs the service.

6) If your old wine cooler is not being used, we recommend that you remove

the door and leave the shelves in place. This will reduce the possibility

of danger to children.

7) This wine cooler should not be recessed or built-in an enclosed cabinet. It

is designed for freestanding installation only.

8) Do not operate your wine cooler in the presence of explosive fumes.

9) Do not store foods in wine cooler as interior temperature may not be cool

enough to prevent spoilage.

English

Thank you for using our Haier

product. This easy-to-use manual will

guide you in getting the best use of

your wine cooler.

Remember to record the model and

serial number. They are on a label in

back of the wine cooler.

Model number

Serial number

Date of purchase

Staple your receipt to your manual. You will need it to obtain

warranty service.

For Future Reference Please

SAVE THESE INSTRUCTIONS

DANGER

Risk of child entrapment. Before you throw away your old

wine cooler, take off the doors. Leave the shelves in place so

that children may not easily climb inside.

As per UL 250 11.2.6

English

Table Of Contents

PAGE

Safety Precautions ..........................................................................1

Parts And Features ..........................................................................4

Installing Your Wine Cooler ..........................................................5

Unpacking Your Wine Cooler..................................................................5

Leveling Your Wine Cooler......................................................................5

Proper Air Circulation ............................................................................5

Electrical Requirements............................................................................6

Wine Cooler

Features And Use ..........................................................7

Initial Set Up ..........................................................................................7

Temperature Adjustment..........................................................................7

Shelving ................................................................................................9

Interior Light ..........................................................................................9

Door Lock ..............................................................................................9

Normal Operating Sounds......................................................................9

Proper Wine Cooler Care and Cleaning....................................10

Cleaning and Maintenance ..................................................................10

Power Interruptions ..............................................................................11

Vacation and Moving Care ..................................................................11

Troubleshooting..............................................................................12

Warranty Information ..................................................................13

English

Parts And Features

1. White Wine Button (-)

2. Red Wine Button (+)

3. Interior Light Button (set)

4. LED Temperature Display

5. Light On/Off Switch

6. Door Lock and Key

7. Door Handle

8. Temperature Control

9. Adjustable Leveling Legs

(not shown)

10. 1 Slide-Out Basket

11. 3 Slide-Out Shelves

12. Interior Light

English

White

Red

Light

Set

Electronic Unit

123456789101112

HVFM20A

HVFO20A

Mechanical Unit

White

OFF

Mid Range

Coldest

Red

Mechanical Control

Unit Only

Electronic Controlled

Unit Only

English

1. Remove all packaging material. This includes the foam base and all

adhesive tape holding the wine cooler accessories inside and outside.

Slide out and remove plastic or foam guard used to secure the

compressor from shipping damage due to vibration and shock.

2. Inspect and remove any remains of packing, tape or printed

materials before powering on the wine cooler.

• Your wine cooler has four leveling legs which are located in the

front and rear corners of your wine cooler. After properly placing your

wine cooler in its final position, you can level your wine cooler.

• Leveling legs can be adjusted by turning them clockwise to raise your

wine cooler or by turning them counterclockwise to lower

your wine cooler. The wine cooler door will close easier when the

leveling legs are extended.

• To assure your wine cooler works at the maximum efficiency it

was designed for, you should install it in a location where there

is proper air circulation, plumbing and electrical connections.

• The following are recommended clearances around the wine cooler:

Sides……………2 "(50mm)

Top....................2" (50mm)

Back..................2" (50mm)

• Do not over fill your wine cooler for proper internal air circulation.

Installing Your Wine Cooler

Unpacking Your Wine Cooler

Proper Air Circulation

Leveling Your Wine Cooler

English

Electrical Requirement

• Make sure there is a suitable power Outlet (115 volts, 15 amps outlet)

with proper grounding to power the wine cooler.

• Avoid the use of three plug adapters or cutting off the third grounding in

order to accommodate a two plug outlet. This is a dangerous practice

since it provides no effective grounding for the wine cooler and may

result in shock hazard.

• Do not install your wine cooler in any location not properly insulated or

heated e.g. garage etc. Your wine cooler was not designed to operate

in temperature settings below 55˚ Fahrenheit.

• Select a suitable location for the wine cooler on a hard even

surface away from direct sunlight or heat source e.g. radiators,

baseboard heaters, cooking appliances etc. Any floor unevenness

should be corrected with the leveling legs located on the front and rear

bottom corners of the wine cooler.

• Your wine cooler is designed for free-standing installation only. It is not

designed for built-in application.

Install Limitations

English

Wine Cooler Features And Use

Electronic Controlled Units:

Once you have plugged the unit into an electrical outlet, let the unit run for

at least 30 minutes to acclimate itself before making any adjustments.

During this time the Red Wine light may stay on.

Mechanical Controlled Units:

The control for this is on the back of the unit. There are 6 settings

plus 0 (OFF). Initially set the temperature setting to 3. Let the unit run for at

least 30 minutes to acclimate itself before making any adjustments.

Initial Setup

Electronic Control Unit: See fig. # 1

• The wine cooler is preset from the factory to automatically

accommodate temperature requirements for red or white wines.

If you store mostly white wines, press the "White Wine" button and the

wine cooler will maintain an average temperature between

45˚ to 50˚ F. Pushing the "Red Wine" button will yield an

average temperature between 55˚ to 60˚ F.

• The wine cooler can be set to any temperature you desire to

accommodate your wine storage requirements. To set the temperature,

press both the "White Wine" and "Red Wine" buttons simultaneously

and hold for approximately 3 seconds. Now you are in temperature set

mode. Decrease the temperature by pushing the "White Wine" button

and increase the temperature by pressing the "Red Wine" button.

Pressing the appropriate button 3 times will adjust the temperature 3

degrees, press 4 times equals 4 degrees, 5 times equals 5 degrees, and

so on. Once you have selected the temperature you desire, push the

"Light/Set" button. Now the wine cooler is programmed and the LED

readout will return to current internal temperature reading.

Temperature Adjustments:

English

• There will be a 3 degree variance +/- between the temperature you

select and the temperature indicated on the LED readout.

This occurs because the wine cooler activates and deactivates

trying to maintain your desired temperature. There is often a

10˚ variance between the top and bottom shelves of the wine cooler.

Therefore, if you have set the wine cooler for 50˚ and have a

mix of red and white wines, you may want to put the white wine

on the bottom shelf where the temperature will be 45˚ F, and place the

red wine on the top shelf where the temperature will be 55˚ F.

Mechanical Control Unit: See fig. # 2

• Your wine cooler has a temperature control knob on the back of the

unit. There are 6 settings: 1 being the warmest and 6 being the coolest.

You can set the temperature of your wine cooler at any

setting you desire.

White

Red

Light

Set

fig. # 1

hite

OFF

Mid Range

Coldest

Red

fig. # 2

English

• The shelves are designed for flexibility and easy cleaning.

To accommodate different sized bottles the shelves slide out

and can be moved up or down into any of the tracks molded

into the cooler cabinet. Larger bottles or Magnums can be more easily

accommodated on the cross shelves of the bottom basket of the cooler.

You will notice that the shelves are designed so the bottles do

not line-up directly over one another. This allows free air

movement and provides more space.

• To complement the look of your wine collection, a soft light has been

built into the wine cooler. Simply push the "Light/Set" button on the

electronic controlled unit, and the light comes on, push again for off.

On the mechanical control units, the light switch is on the front for your

convenience. For maximum energy efficiency, leave light off when not

viewing your collection.

Shelving

Interior Light

• For safety and security, your wine cooler is equipped with a door lock.

To eliminate the risk of accidental child entrapment, the lock was

designed so that the door will not lock until the key is removed

(consistent with UL requirements).

• Boiling water, gurgling sounds or slight vibrations that are the result of

the refrigerant circulating through the cooling coils.

• The thermostat control will click when it cycles on and off.

Door Lock

(electronic controlled unit only)

Normal Operating Sounds You May Hear

English

Warning:

To avoid electric shock always unplug your

wine cooler before cleaning. Ignoring this warning

may result in death or injury.

Caution:

Before using cleaning products, always read and

follow manufacturer’s instructions and warnings to

avoid personal injury or product damage.

General:

• Prepare a cleaning solution of 3-4 tablespoons of

baking soda mixed with warm water. Use sponge or

soft cloth, dampened with the cleaning solution, to

wipe down your wine cooler.

• Rinse with clean warm water and dry with a soft cloth.

• Do not use harsh chemicals, abrasives, ammonia,

chlorine bleach,concentrated detergents, solvents or

metal scouring pads. SOME of these chemicals may

dissolve, damage and/or discolor your wine cooler.

• Clean door gaskets every three months according to

general instructions. Gaskets must be kept clean and

pliable to assure a proper seal.

• Petroleum jelly applied lightly on the hinge side of

gaskets will keep the gasket pliable and assure a

good seal.

Proper Wine Cooler Care and Cleaning

Cleaning and Maintenance

Door Gaskets:

English

• Occasionally there may be power interruptions due to

thunderstorms or other causes. Remove the power cord from AC outlet

when a power outage occurs. When power has been restored,

replug power cord to AC outlet.

• For long vacations or absences, unplug the wine cooler and clean the

wine cooler and door gaskets according to "General cleaning" section.

Prop doors open, so air can circulate inside. When moving always

move the wine cooler vertically. Do not move with the unit lying down.

Possible damage to the sealed system could occur.

Power Interruptions

Vacation and Moving Care

English

Wine Cooler Does Not Operate

• Check if wine cooler is plugged in.

• Check if there is power at the ac outlet, by checking the circuit breaker.

Wine appears too warm

• Frequent door openings.

• Allow time for recently added wine to reach desired temperature.

• Check gaskets for proper seal.

• Clean condenser coils.

• Adjust temperature control to colder setting.

Wine temperature is too cold

• If temperature control setting is too cold, adjust to a warmer setting.

Wine cooler runs too frequently

• This may be normal to maintain constant temperature during

high temperature and humid days.

• Doors may have been opened frequently or for an extended

period of time.

• Clean condenser coils.

• Check gasket for proper seal.

• Check to see if doors are completely closed.

Moisture build up on interior or exterior

of the wine cooler:

• This is normal during high humidity periods.

• Prolonged or frequent door openings.

• Check door gaskets for proper seal.

Wine Cooler door does not shut properly:

• Level the wine cooler.

• Check for blockages e.g. wine bottles, shelves.

TroubleShooting

English

Limited Warranty

What is covered and for how

long?

This warranty covers all defects in work-

manship or materials for a period of:

12 months labor

12 months parts

5 years sealed system

The warranty commences on the date

the item was purchased and the original

purchase receipt must be presented to

the authorized service center before

warranty repairs are rendered.

EXCEPTIONS: Commercial or

Rental Use warranty

90 days labor (carry-in only)

90 days parts

No other warranty applies

What is covered.

1. The mechanical and electrical parts,

which serve as a functional, purpose

of this appliance for a period of 12

months. This includes all parts except

finish, and trim.

2. The components of the sealed system

e.g. hermetic compressor, condenser

and evaporator from manufacturing

defects for a period of 5 years from

the date of purchase. Any damages

to such components caused by

mechanical abuse or improper

handling or shipping will not be

covered.

What will be done?

1. We will repair or replace, at our dis-

cretion any mechanical or electrical

part which proves to be defective in

normal usage during the warranty

period so specified.

2. There will be no charge to the

purchaser for parts and labor on any

covered items during the initial 12

month period. Beyond this period

only parts are covered in the remain-

ing warranty. Labor is not provided

and must be paid by the customer.

3. Contact your nearest authorized

service center. For the name of the

nearest service center please call

1-877-337-3639

THIS WARRANTY COVERS

APPLIANCES WITHIN THE

CONTINENTAL UNITED STATES,

PUERTO RICO AND CANADA.

IT DOES NOT COVER

THE FOLLOWING:

Damages from improper installation.

Damages in shipping.

Defects other than manufacturing.

Damage from misuse, abuse, accident,

alteration, lack of proper care and

maintenance or incorrect current or

voltage.

Damage from other than household use.

Damage from service by other than an

authorized dealer or service center.

Decorative trims or replaceable

light bulbs.

Transportation and shipping.

Labor (after the initial 12 months).

THIS LIMITED WARRANTY IS GIVEN IN

LIEU OF ALL OTHER WARRANTIES,

EXPRESSED OR, INCLUDING THE

WARRANTIES OF MERCHANTABILITY

AND FITNESS FOR A PARTICULAR

PURPOSE

The remedy provided in this warranty is

exclusive and is granted in lieu of all

other remedies.

This warranty does not cover incidental

or consequential damages, so the above

limitations may not apply to you. Some

States do not allow limitations on how

long an implied warranty lasts, so the

above limitations may not apply to you.

This warranty gives you specific legal

rights, and you may have other rights,

which vary, from state to state.

Haier America Trading L.L.C.

New York, NY 10018.

English

Français

MESURES DE SECURITE

Lire l’ensemble des instructions avant d’utiliser l’appareil.

Lors de l’utilisation de cet appareil, prendre toutes les

mesures de sécurité de base, y compris les suivantes:

1) N’utiliser cet appareil que pour l’usage pour lequel il est prévu,

tel qu’il est indiqué dans le guide d’utilisation et d’entretien.

Ce réfrigérateur à vin doit être installé correctement, selon les instructions

d'installation, avant d'être utilisé. Voir les instructions de mise à la terre

dans la section d'installation.

Ne jamais débrancher le réfrigérateur à vin en tirant sur le cordon d'alimenta-

tion. Saisissez toujours la fiche fermement et la tirez-la directement de la prise de

courant.

Réparez ou remplacez immédiatement tous les cordons d'alimentation qui sont

frangés ou endommagés. N'utilisez pas de cordon qui présente des fissures ou

de l'abrasion sur le fil ou aux extrémités.

Débranchez votre réfrigérateur avant de le nettoyer ou d'en faire l'entretien

général. Note : N'essayez pas de faire les réparations vous-mêmes. Contactez

un agent de service qualifié pour toute réparation.

Si vous remplacez un vieux réfrigérateur à vin, enlevez les portes avant de

l'entreposer ou de le jeter et laissez les étagères en place. Cela réduira les

dangers potentiels pour les enfants.

Ce réfrigérateur à vin ne doit pas être suspendu ou encastré. Il est conçu pour

être installé de façon indépendante seulement (veuillez vous référer à la section

Installation pour de plus amples informations).

Ne faites pas fonctionner le réfrigérateur à vin en présence

d'émanations explosives.

9) N'enregistrez pas les nourritures dans le refroidisseur

de vin car la température intérieure peut ne pas être assez

fraîche pour empêcher la détérioration

Français

Aux fins de toute consultation ultérieure,

VEUILLEZ CONSERVER CES

INSTRUCTIONS

DANGER

Les enfants pourraient se retrouver coincés dans votre

réfrigérateur à vin usagé avant que vous ne puissiez vous en

débarrasser. Retirer les portes. Laisser les étagères en place

de manière à ce que les enfants ne

puissent pas grimper facilement à l’intérieur".

Conseils de l‚UL 250 11.2.6

Nous vous remercions d’avoir choisi

ce produit Haier. Ce guide

d’utilisation facile d’emploi permet

une utilisation optimum du

réfrigérateur á vin. Ne pas oublier

de prendre note du numéro de

modèle et de série. Ils sont inscrits

sur une plaquette apposée sur

l’arrière du

réfrigérateur à vin

Numéro de modèle

Numéro de série

Date d’achat

Agrafer le ticket de caisse au guide. Il devra être présenté pour tout

service après-vente sous garantie.

Français

Sommaire

PAGE

Mesures de Sécuriteé ......................................................................1

Pièces et Caractéristiques ..............................................................4

Installation du Réfrigératuer á Vin ..............................................5

Désemballage du Réfrigérateur á Vin ......................................................5

Réglage du Réfrigérateur á Vin ..............................................................5

Circulation d’Air Adéquate ....................................................................5

Caractéristiques Electriques ....................................................................5

Caractéristques du Réfrigérateur á Vin

........................................7

Montage Initial ......................................................................................7

Ajustements de Température....................................................................7

Tablettes ................................................................................................9

Lumière Intèrieure ..................................................................................9

Serrure de porte ....................................................................................9

Bruits de Fonctionnement lors d'une Exploitation Normale ........................9

Entretien et Nettoyage du Réfrigérateur á Vin

........................10

Nettoyage et Maintenance....................................................................10

Coupures de Courant ..........................................................................11

Entretien lors des Vacances ou d'un Déménagement ..............................11

Guide de Dépannage

........................................................................12

Garantie ..........................................................................................14

Français

Piéces et Caractéristiques

1. Bouton pour le Vin Blanc (-)

2. Bouton pour le Vin Rouge (+)

3. Bouton de Lumière Intérieure (set)

4. Afficheur de Lumière

à Incandescence

5. Commutateur ‘On/Off’ léger

6. Serrure et Clé de la Porte

7. Béquille de porte

8. Commande de Température

9. Jambes de Mise à Niveau Réglables

(non illustrées)

10. 1 Panier Démontable

11. 3 Clayettes Amovibles

12.

Lumière Intèrieure

White

Red

Light

Set

Commande Electrique

123456789101112

HVFM20A

HVFO20A

Commande Mécanique

White

OFF

Mid Range

Coldest

Red

Commande

Mechanique Seulement

Commande

Electrique Seulement

Français

1. Retirer l’ensemble du matériel d’emballage. Ceci comprend la base en

mousse ainsi que l’ensemble du matériel adhésif qui maintient les

accessoires du réfrigérateur à vin l'intérieur tout comme à l’extérieur.

Faire glisser et retirer la protection plastique ou en mousse servant à

préserver le compresseur de tout dommage causé par les vibrations

2. Inspecter et enlever tout restant d’emballage, de scotch ou de

matériaux imprimés avant de brancher le réfrigérateur à vin.

• Votre refroidisseur de vin a quatre jambes de mise à niveau qui sont

plac dans les coins avant et arrière de votre refroidisseur de vin.

• Pour régler les pieds de mise à niveau, les tourner dans le sens des

aiguilles d’une montre afin de surélever le réfrigérateur á vin et dans le

sens inverse des aiguilles d’une montre pour l’abaisser. La porte du

réfrigérateur á vin se ferme plus facilement lorsque les pieds de mise à

niveau sont surélevés.

• Pour être sûr que le réfrigérateur á vin fonctionne à son

maximum d'efficacité, l'installer dans un environnement

favorable à une bonne circulation d'air et possédant des

connexions de plomberie et d’électricité saines.

• Les indications suivantes concernent l’espace recommandé autour du

réfrigérateur á vin:

Latéralement...................50mm (2")

Partie supérieure.............50mm (2")

Arrière...........................50 mm (2")

• Ne remplissez pas au-dessus du niveau votre refroidisseur de vin pour

le circulaton interne approprié d'air.

Installation du Réfrigérateur á Vin

Désemballage du Réfrigérateur á Vin

Réglage du Réfrigérateur á Vin

Circulation d’Air Adéquate

Français

• Pour l’alimentation du réfrigérateur á vin, veiller à utiliser

une prise de courant convenable (prise de 115 volts,15 amp)

raccordée à la terre.

• Eviter d’utiliser des adaptateurs à trois fiches ou de sectionner la

troisième fiche reliée à la terre dans le but d’utiliser un branchement à

deux fiches. Cette pratique pourrait s’avérer dangereuse

dans la mesure où le réfrigérateur á vin n’est pas relié convenablement

à la terre, et risquerait de causer des risques d’électrocution.

• Ne pas installer le réfrigérateur á vin dans un endroit qui n’est pas

convenablement isolé ou chauffé ; comme par exemple un garage, etc.

Le réfrigérateur á vin n’est pas conçu pour fonctionner à des

températures inférieures à 12°C.

• Choisir un endroit convenable et placer le réfrigérateur á vin sur une

surface solide et plane, loin de sources de chaleur telles que:

les radiateurs, les éléments chauffants à plinthes, les cuisinières, etc.

N'importe quelle inégalité de plancher devrait être corrigée avec

les jambes de mise à niveau plac sur les coins plan et arrière de

votre refroidisseur de vin.

• Votre refroidisseur de vin est conçu pour l'installation debout libre

seulement Il OS non conçu pour le bult dans l'application.

Caractéristiques Electriques

Limitations relatives à l’Installation

Français

La page charge ...

Haier HVF020ABB Manuel utilisateur

Marque: Haier

Modèle: HVF020ABB

Catégorie: Boissons glacées

Taper: Manuel utilisateur

Ce manuel convient également à

Télécharger le PDF

rapport

dans d''autres langues

English: Haier HVF020ABB User manual
español: Haier HVF020ABB Manual de usuario

Haier HVF020ABB Manuel utilisateur

Ce manuel convient également à

Haier HVF020ABB Manuel utilisateur

dans d''autres langues

Documents connexes