Sony CDX-M9900 Mode d'emploi

Catégorie
Lecteur CD
Taper
Mode d'emploi
Operating Instructions
Mode d’emploi
US
FR
3-265-745-12 (1)
Owner’s Record
The model and serial numbers are located on the bottom of the unit.
Record these numbers in the space provided below.
Refer to these numbers whenever you call upon your Sony dealer regarding this product.
Model No. CDX-M9900 Serial No.
CDX-M9900
For installation and connections, see the supplied installation/connections manual.
En ce qui concerne l’installation et les connexions, consulter le manuel d’installation/
raccordement fourni.
© 2004 Sony Corporation
FM
/
AM
Compact Disc
Player
2
About this manual
Instructions in this manual describe how to use the
functions by mainly using the card remote
commander.
Illustrations in this manual may differ from the actual
device.
Welcome !
Thank you for purchasing this Sony Compact
Disc Player.
FEATURING:
Video input terminal provided for viewing
video images.
Store video images for various visual effects.
MP3 file playback recorded on a disc is
possible.
CD-R/CD-RW which can have a session added
can be played (page 8).
Discs recorded in Multi Session (CD-Extra,
Mixed CD, etc.) can be played, depending on
the recording method (page 8).
Optional CD/MD units (both changers and
players)*
1
.
•ID3 tag*
2
version 1.0, 1.1, 2.2, 2.3 or 2.4
information (displayed when an MP3 file is
played).
CD TEXT information (displayed when a CD
TEXT disc*
3
is played).
Supplied controller accessory
Card remote commander RM-X145A
Optional controller accessory
Wired rotary commander RM-X4S
Wireless rotary commander RM-X6S
*1 This unit works with Sony products only.
*2 ID3 tag is an MP3 file that contains information
about album name, artist name, track name, etc.
*3 A CD TEXT disc is an audio CD that includes
information such as the disc name, artist name,
and track names. This information is recorded on
the disc.
Warning
This equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment
generates, uses, and can radiate radio frequency
energy and, if not installed and used in
accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to
radio or television reception, which can be
determined by turning the equipment off and on,
the user is encouraged to try to correct the
interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment
and receiver.
Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
Consult the dealer or an experienced radio/TV
technician for help.
You are cautioned that any changes or
modifications not expressly approved in this
manual could void your authority to operate this
equipment.
The use of optical instruments with this produc
t
will increase e
y
e hazard.
CAUTION
For customers in the United States
This product contains mercury. Disposal of
this product may be regulated if sold in the
United States. For disposal or recycling
information, please contact your local
authorities or the Electronics Industries
Alliance (http://www.eiae.org).
The “XM Ready” logo indicates that
this product will control an XM tuner
module (sold separately). Please see
your nearest authorized Sony dealer for
details on the XM tuner module.
R
The BBE MP process improves digitally
compressed sound, such as MP3, by restoring
and enhancing the higher harmonics lost through
compression. BBE MP works by generating
even-order harmonics from the source material,
effectivel
y
recoverin
g
warmth, detail and nuance.
3
Table of Contents
Location of controls . . . . . . . . . . . . . . . . . . . .4
Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . .6
Notes on discs . . . . . . . . . . . . . . . . . . . . . . . .7
About MP3 files. . . . . . . . . . . . . . . . . . . . . . .8
Basic operations. . . . . . . . . . . . . . . . . . . . . .10
Selecting the display mode and display
pattern . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Getting Started
Resetting the unit . . . . . . . . . . . . . . . . . . . . .13
Setting the clock and the calendar
— Clock. . . . . . . . . . . . . . . . . . . . . . . . . .13
CD Player
CD/MD Unit (optional)
Playing a disc . . . . . . . . . . . . . . . . . . . . . . . .14
Display items . . . . . . . . . . . . . . . . . . . . . . . .15
Playing tracks repeatedly
— Repeat. . . . . . . . . . . . . . . . . . . . . . . . .16
Playing tracks in random order
— Shuffle . . . . . . . . . . . . . . . . . . . . . . . .17
Labeling a CD
— Disc Memo . . . . . . . . . . . . . . . . . . . . .17
Locating a disc by name
— Disc List* . . . . . . . . . . . . . . . . . . . . . .18
* Functions available with optional CD/MD unit
Radio
Storing stations automatically
— BTM (Best Tuning Memory) . . . . . . .19
Display items . . . . . . . . . . . . . . . . . . . . . . . .19
Receiving the stored stations . . . . . . . . . . . .20
Storing only desired stations . . . . . . . . . . . .20
Storing station names
— Station Memo . . . . . . . . . . . . . . . . . . .21
Tuning in a station through a list
— Preset List. . . . . . . . . . . . . . . . . . . . . .22
Image Settings
Selecting the face pattern
— Skin. . . . . . . . . . . . . . . . . . . . . . . . . . .22
Setting the character color
— Char Color . . . . . . . . . . . . . . . . . . . . .23
Changing the display image automatically
— Auto Image. . . . . . . . . . . . . . . . . . . . .24
Selecting the effect pattern
— Effect . . . . . . . . . . . . . . . . . . . . . . . . .24
Selecting a wallpaper
— Wallpaper. . . . . . . . . . . . . . . . . . . . . . 25
Setting a panorama image
— Panorama . . . . . . . . . . . . . . . . . . . . . . 25
Selecting the aspect ratio
— Aspect . . . . . . . . . . . . . . . . . . . . . . . . 26
Turning off the display characters
— Auto Clear . . . . . . . . . . . . . . . . . . . . . 27
Storing the images
— Snapshot. . . . . . . . . . . . . . . . . . . . . . . 28
Selecting the start-up image
— Opening . . . . . . . . . . . . . . . . . . . . . . . 29
Sound Setting
Setting the BBE MP
— BBE MP. . . . . . . . . . . . . . . . . . . . . . . 29
Quickly attenuating the sound
— ATT . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Setting the Dynamic Soundstage Organizer
— DSO . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Setting the equalizer
— EQ7 . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Adjusting the bass and treble
— Bass/Treble . . . . . . . . . . . . . . . . . . . . 31
Adjusting the front and rear volume
— Balance/Fader . . . . . . . . . . . . . . . . . . 32
Adjusting the subwoofer volume
— Sub Woofer . . . . . . . . . . . . . . . . . . . . 33
Setting the loudness
— Loudness . . . . . . . . . . . . . . . . . . . . . . 34
Connecting auxiliary audio equipment . . . . 34
Other Functions
Setting the custom function
— Custom. . . . . . . . . . . . . . . . . . . . . . . . 35
Initializing the unit
— Initialize . . . . . . . . . . . . . . . . . . . . . . . 35
Menus and items . . . . . . . . . . . . . . . . . . . . . 36
Using the rotary commander . . . . . . . . . . . . 39
Additional Information
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . 40
Removing the unit . . . . . . . . . . . . . . . . . . . . 41
Specifications . . . . . . . . . . . . . . . . . . . . . . . 42
Troubleshooting. . . . . . . . . . . . . . . . . . . . . . 43
Error displays/Messages . . . . . . . . . . . . . . . 45
4
Location of controls
a CAT*
1
button
b Number buttons
Radio:
To store/receive stations.
CD/MD:
To change playback mode.
(1): REP
(2): SHUF
(6): PAUSE*
2
Sound:
(5): BBE MP*
2
c SCREEN button
To select the display mode.
d MENU button
To display the main menu.
e SOURCE (Power on/Radio/CD/MD*
3
/
AUX*
4
) button
To select the source.
f </, (SEEK –/+) buttons
To skip tracks/fast-forward, reverse a track/
tune in stations automatically, find a station
manually/select a setting.
g BACK button
To return to a previous display.
h OFF button
To turn off the unit/stop playback or radio
reception.
i VOL (+/–) buttons
j OPEN/CLOSE button
To open/close the front panel/To eject a disc
when loaded.
k CAPTURE button
To store images.
l IMAGE button
To select the display pattern.
m MODE button
To change the radio band/playback unit.
n M/m (DISC +/–) button
To receive preset stations/change the disc*
5
,
skip albums*
6
/select a menu.
o ENTER button
To decide an item/apply a setting.
p ATT button
To attenuate the sound.
*1 The CAT button is available only when the XM
tuner is connected.
*2 Available only when playing back on this unit.
*3 When an optional MD unit is connected.
*4 Available only when an optional Sony portable
device is connected to AUX IN terminal of the unit.
When you connect a Sony portable device and CD/
MD unit(s) at the same time, use the AUX IN
selector.
*5 When an optional CD/MD unit is connected.
*6 Available only when an MP3 file is played.
DISC
ATTOFF
CAT
OPEN/CLOSE
REP SHUF
BBE MP PAUSE
1
4
CAPTURE
2
5
3
6
SOURCE
DISC
+
SEEK
+
SEEK
BACK
EN
TER
MENU
MODE
SCREEN IMAGE
VOL
+
Note
If the display disappears byCDX-M9900 pressing
(OFF), the unit cannot be operated with the card
remote commander unless (SOURCE) on the unit is
pressed, or a disc is inserted to activate the unit first.
Tip
Refer to “Replacing the lithium battery” for details on
how to replace the batteries (page 41).
When selecting the item in the menus
DISC
SOURCE
DISC
+
SEEK
+
SEEK
(DISC) (M) :
to select upwards
(DISC) (m) :
to select downwards
(SEEK) (<):
to select
leftwards
(SEEK) (,):
to select
rightwards
Card remote commander RM-X145A
5
The buttons on the unit share the same
functions as those on the card remote
commander.
a SOURCE (Power on/Radio/CD/MD/
AUX*
1
) button
To select the source.
b OFF (Stop/Power off) button
To turn off the unit/stop playback or radio
reception.
c Display window
d ENTER button
CD/MD/Radio:
To change the functions of the R dial.
Menu:
To decide an item/apply a setting of the
menu item.
e Z (Open/Close) button
To open/close the front panel/To eject a disc
when loaded.
f L (Left) dial
To adjust the volume.
g CUSTOM button
CD/MD/Radio/AUX:
To perform the function assigned.
Menu:
To return to a previous display.
h Receptor
To receive signals from the card remote
commander or wireless rotary commander.
i Reset button
To reset the unit.
j MENU button
To display the main menu for settings and
adjustments.
k R (Right) dial
CD/MD/Radio:
To select the desired radio station, track,
album*
2
or disc*
3
.
Menu:
To select an item.
Note on using the L/R dials
Before using the L/R dials, push in and release
them first. Push in again when storing after use.
*1 Available only when an optional Sony portable
device is connected to AUX IN terminal of the unit.
When you connect a Sony portable device and CD/
MD unit(s) at the same time, use the AUX IN
selector.
*2 Available only when an MP3 file is played.
*3 When an optional CD/MD unit is connected.
Warning
When installing in a car without an ACC
(accessory) position on the ignition switch
After turning off the ignition, be sure to press and
hold (OFF) on the unit until the display
disappears.
Otherwise, the display does not turn off and this
causes battery drain.
CDX-M9900
SOURCE
CUSTOM
OFF
VOL
MENU
ENTER
6
Precautions
If your car was parked in direct sunlight, allow
the unit to cool off before operating it.
Power antennas will extend automatically
while the unit is operating.
Do not use the Disc Memo feature while
driving, or perform any other function which
could divert your attention from the road.
If you have any questions or problems
concerning your unit that are not covered in this
manual, please consult your nearest Sony dealer.
On safety
Comply with the Traffic Laws in your country.
For your safety, the images from VIDEO IN
turns off automatically when the parking brake
is not applied.
Moisture condensation
On a rainy day or in a very damp area, moisture
condensation may occur inside the lenses and
display of the unit. Should this occur, the unit
will not operate properly. In such a case, remove
the disc and wait for about an hour until the
moisture has evaporated.
To maintain high sound quality
Be careful not to splash juice or other soft drinks
onto the unit or discs.
Notes on LCD display
Do not push the LCD display strongly. It may
cause injury or damage the display.
Bright points of light (red, blue, or green) or
black dots may appear on the LCD display.
This is not a malfunction. The LCD is made
with high-precision technology and more than
99.99 % of the picture element is intact.
However, tiny elements of the picture may
show the above symptoms.
Preventing an accident
The images appear only after you park the car
and set the parking brake.
When the car starts moving, the images coming
from the VIDEO IN automatically disappear
after displaying the following caution.
The images on the display are turned off, but
CD/MP3 sound can be heard.
Do not operate the unit or watch the display
window while driving.
7
Notes on discs
To keep discs clean, do not touch the surface.
Handle a disc by its edge.
Keep your discs in their cases or disc
magazines when not in use.
Do not subject the discs to heat/high
temperature. Avoid leaving them in parked cars
or on dashboards/rear trays.
Do not attach labels, or use discs with sticky
ink/residue. Such discs may stop spinning
when used, causing a malfunction, or may ruin
the disc.
Do not use any discs with labels or stickers
attached.
The following malfunctions may result from
using such discs:
– Inability to eject a disc (due to a label or
sticker peeling off and jamming the eject
mechanism).
– Inability to read audio data correctly (e.g.,
playback skipping, or no playback) due to
heat shrinking of a sticker or label causing a
disc to warp.
Discs with non-standard shapes (e.g., heart,
square, star) cannot be played on this unit.
Attempting to do so may damage the unit. Do
not use such discs.
You cannot play 8 cm (3 in) CDs.
Before playing, clean the discs with a
commercially available cleaning cloth. Wipe
each disc from the center out. Do not use
solvents such as benzine, thinner, commercially
available cleaners, or antistatic spray intended
for analog discs.
continue to next page t
8
Music discs encoded with copyright
protection
This product is designed to play back discs that
conform to the Compact Disc (CD) standard.
Recently, various music discs encoded with
copyright protection are marketed by some
record companies. Please be aware that among
those discs, there are some that do not conform to
the CD standard and may not be playable by this
product.
Notes on CD-Rs (recordable CDs)/CD-
RWs (rewritable CDs)
This unit can play the following discs:
Some CD-Rs/CD-RWs (depending on the
equipment used for its recording or the
condition of the disc) may not play on this unit.
You cannot play a CD-R/CD-RW that is not
finalized*.
You can play MP3 files recorded on CD-
ROMs, CD-Rs, and CD-RWs.
A CD-R/CD-RW to which a session can be
added can be played.
* A process necessary for a recorded CD-R/CD-RW
disc to be played on the audio CD player.
About MP3 files
MP3 (MPEG 1 Audio Layer-3) is a standard
technology and format for compressing a sound
sequence. The file is compressed to about 1/10 of
its original size. Sounds outside the range of
human hearing are compressed while the sounds
we can hear are not compressed.
Notes on discs
You can play MP3 files recorded on CD-ROMs,
CD-Rs, and CD-RWs.
The disc must be in the ISO 9660*
1
level 1 or
level 2 format, or Joliet or Romeo in the
expansion format.
You can use a disc recorded in Multi Session*
2
.
*
1
ISO 9660 Format
The most common international standard for
the logical format of files and folders on a
CD-ROM.
There are several specification levels. In
Level 1, file names must be in the 8.3 format
(no more than 8 characters in the name, no
more than 3 characters in the extension
“.MP3”) and in capital letters. Folder names
can be no longer than 8 characters. There can
be no more than 8 nested folder levels. Level
2 specifications allow file names up to 31
characters long.
Each folder can have up to 8 trees.
For Joliet or Romeo in the expansion format,
make sure of the contents of the writing
software, etc.
*
2
Multi Session
This is a recording method that enables
adding of data using the Track-At-Once
method. Conventional CDs begin at a CD
control area called the Lead-in and end at an
area called Lead-out. A Multi Session CD is a
CD having multiple sessions, with each
segment from Lead-in to Lead-out regarded
as a single session.
CD-Extra: The format which records audio
(audio CD data) as tracks on session 1, and
records data as tracks on session 2.
Mixed CD: In this format, data is recorded as
track 1, and audio (audio CD data) is recorded
as track 2.
Type of discs Label on the disc
Audio CD
MP3 files
9
Notes
With formats other than ISO 9660 level 1 and level 2,
folder names or file names may not be displayed
correctly.
When naming, be sure to add the file extension
“.MP3” to the file name.
If you put the extension “.MP3” to a file other than
MP3, the unit cannot recognize the file properly and
will generate random noise that could damage your
speakers.
The following discs take a longer time to start
playback.
– a disc recorded with complicated tree structure.
– a disc recorded in Multi Session.
– a disc to which data can be added.
Cautions when playing a disc that is recorded in
Multi Session
When the first track of the first session is audio CD
data:
Only audio CD data is played back.
Non-audio CD data/MP3 file information (track
number, time, etc.) is displayed with no sound.
When the first track of the first session is not audio
CD data:
– If an MP3 file is in the disc, only MP3 file(s) play
back and other data is skipped (Audio CD data is
not recognized).
– If no MP3 file is in the disc, “Disc NO Music” is
displayed and nothing is played back (Audio CD
data is not recognized).
The playback order of the MP3 files
The playback order of the folders and files is as
follows:
Notes
A folder that does not include an MP3 file is skipped.
Maximum folder number: 150 (including root folder
and empty folders).
Maximum number of MP3 files and folders that can
be contained in a disc: 300.
When a file/folder name contains many characters,
this number may become less than 300.
Maximum number of trees that can be played: 8.
Tip
To specify a desired playback order, before the folder
or file name, input the order by number (e.g., “01,
“02”), then record contents onto a disc (The order
differs depending on the writing software).
1
2
6
3
5
7
1
2
6
7
4
8
3
5
8
4
9
Folder (album)
MP3 file (track)
Tree 1
(root)
Tree 2
Tree 4
Tree 5
Tree 3
10
Basic operations
Main menu
You can set the various setting from the main
menu. Setting items and functions are
categorized into menus as follows:
List - Displaying the lists.
Display - Settings for display images.
Edit - Editting disc and station names/
Controlling stored contents.
Setup - Settings for the system of the unit.
Sound - Settings for sound quality.
Custom - Assigning functions to the
CUSTOM button.
PlayMode - Settings for playback and radio
reception.
For details on menu items, see “Menus and
items” on page 36.
Operation by the main unit:
1 During playback or radio reception,
press (MENU).
The main menu appears.
2 Rotate the R dial to select the desired
menu item, then press (ENTER).
As you rotate the R dial, the item changes as
follows:
List y Display y Edit y Setup y
Sound y Custom y PlayMode
3 Rotate the R dial to select the desired
setting item, then press (ENTER).
4 Rotate the R dial to select the desired
setting, then press (ENTER).
5 Press (MENU).
The display returns to the normal display.
During the menu operation:
To return to the previous display, press
(CUSTOM).
To cancel the menu selection, press (MENU).
Tip
Depending on the selected item, press (ENTER)
repeatedly to select “ON” or “OFF” in step 3, then
press (MENU) to return to the normal display.
Operation by the card remote commander:
1 During playback or radio reception,
press (MENU).
The main menu appears.
2 Press < or , repeatedly to select the
desired menu item, then press
(ENTER).
Each time you press < or ,, the item
changes as follows:
List y Display y Edit y Setup y
Sound y Custom y PlayMode
3 Press < or , repeatedly to select the
desired setting item, then press
(ENTER).
4 Press < or , repeatedly to select the
desired setting, then press (ENTER).
5 Press (MENU).
The display returns to the normal display.
During the menu operation:
To return to the previous display, press (BAC K).
To cancel the menu selection, press (MENU).
Tip
Depending on the selected item, press (ENTER)
repeatedly to select “ON” or “OFF” in step 3, then
press (MENU) to return to the normal display.
ENTER
MENUCUSTOM
R dial
DISC
CAT
OPEN/CLOSE
REP SHUF
BBE MP PAUSE
1
4
CAPTURE
2
5
3
6
SOURCE
DISC
+
SEEK
+
SEEK
BACK
ENTER
MENU
MODE
SCREEN IMAGE
ENTER
MENU
BACK
11
Shift menu
The R dial functions in various ways depending
on the shift menu selected.
Operation by the main unit:
1 During playback or radio reception,
press (ENTER) repeatedly until the
desired shift menu appears.
Each time you press (ENTER), the shift
menu changes as follows:
During playback:
AMS+/–*
2
t ALBUM+/–*
3
t DISC+/–*
4
t AMS+/–*
2
During radio reception:
PRESET+/–*
2
t SEEK+/–*
5
t
MANUAL+/– t PRESET+/–*
2
*1 Shift menus disappear in 8 seconds if no
operation is performed.
*2 Available only when no shift menu is displayed.
*3 Available only when an MP3 file is played.
*4 Available only when an optional CD/MD unit is
connected.
*5 To stop searching, rotate the R dial in the
reverse direction.
2 Rotate the R dial to select the desired
operation.
Custom function
You can assign one of the functions in the custom
menu to the CUSTOM button to perform the
function easily.
During playback or radio reception,
press (CUSTOM).
For details on assigning the function, see
“Setting the custom function” on page 35.
Selecting the display mode
and display pattern
You can enjoy visual effects in various
combinations by selecting the display patterns in
the display modes. Each display mode has
several display patterns, and visual effects of
these patterns can be customized.
Operation by the card remote commander:
1 During playback or radio reception,
press ( SC REEN ) repeatedly to select
the desired display mode.
Each time you press (SCREEN), the display
mode changes as follows:
Standard mode t Spectrum Analyzer mode
t Movie mode t Video mode t Standard
mode
2 Press (IMAGE) repeatedly to select the
desired display pattern.
The display pattern changes depending on the
selected display mode.
ENTER
R dial
Shift menu*
1
CUSTOM
continue to next page t
DISC
CAT
OPEN/CLOSE
REP SHUF
BBE MP PAUSE
1
4
CAPTURE
2
5
3
6
SOURCE
DISC
+
SEEK
+
SEEK
BACK
ENTER
MENU
MODE
SCREEN IMAGE
IMAGE
SCREEN
12
Display modes and display patterns
The following display patterns are selectable
depending on the display mode, and setting items
in the menu differ depending on the selected
display pattern. For details on setting the display
patterns in the Standard mode and Video mode,
see page 22 to 29.
Standard mode*
1
Displays images and/or pre-stored visual effects
with various information.
Example: Wallpaper & Effect
Example: Panorama & Effect
The display pattern changes as follows:
Effect t Wallpaper t Wallpaper & Effect t
Panorama t Panorama & Effect t Effect
Spectrum Analyzer mode*
1
Displays pre-stored animated patterns with
various information.
Example: Type-A
The display pattern changes as follows:
Space Producer*
2
t Type-A t Type-B t
Type-C t Type-D t Space Producer*
2
Movie mode*
1
Displays pre-stored moving pictures with various
information.
The display pattern changes as follows:
Movie-1 t Movie-2 t ... t Movie-13
Video mode*
1
Displays video images and/or pre-stored
spectrum analyzers with various information.
Example: Video & Spectrum Analyzer
The display pattern changes as follows:
Video full t Video & Spectrum Analyzer t
Video & Capture t Video & Slideshow
Notes
The Video mode is available when the video unit is
connected to the VIDEO IN terminal, and signals are
output from the video unit connected.
Video images appear only when the parking break is
applied.
Make sure that the color system of this unit is set to
“PAL” or “NTSC” according to the video unit
connected. When the color system of this unit does
not conform to the video unit, the Video mode is not
available.
This unit conforms to the PAL and NTSC color
system. Video images from an equipment not
compatible with PAL and NTSC may not be
displayed.
Tip
When AUX is selected as a source in the Video mode,
you can adjust the brightness of the display in 1 step
from –5 to +5 by rotating the R dial.
*1 You can change the images in sequence
automatically. For details, see “Changing the
display image automatically” on page 24.
*2 Space Producer is developed GUI feature in
Spectrum Analyzer mode, which produces music
ambience on screen with color, size and movement
of the objects.
13
Getting Started
Resetting the unit
Before operating the unit for the first time, or
after replacing the car battery or changing the
connections, you must reset the unit.
Press the reset button with a pointed object, such
as a ball-point pen.
After pressing the reset button, the start-up image
appears and the demonstration starts
automatically.
Note
Pressing the reset button will erase some stored
contents such as the clock/calender settings in the
memory of the unit.
Tips
During the demonstration display, you can adjust the
brightness of the display in 11 steps (from 0 to 10)
by rotating the R dial.
You can change the start-up image. For details, see
“Selecting the start-up image” on page 29.
Setting the clock and the
calendar
— Clock
The clock uses a 12-hour digital indication.
1 Press (MENU).
2 Press < or , repeatedly to select
“Setup,” then press (ENTER).
3 Press < or , repeatedly to select
“Clock,” then press (ENTER).
4 Set the date and time.
1 Press M or m repeatedly to select
the month, then press (ENTER).
2 Follow the step 1 to set the day, the
year, hour and minute.
The confirmation display appears after
setting the minute, then press (ENTER).
5 Press < or , to select “YES,” then
press (ENTER).
“Complete” appears, and the display returns
to the main menu.
6 Press (MENU).
The display returns to the normal display.
Note
If your car has no ACC position, turn on the unit first,
then set the clock and the calendar.
Tips
“am” or “pm” toggles automatically depending on the
time you set.
You can set the year from 2004 to 2099.
Reset button
14
CD Player
CD/MD Unit (optional)
In addition to playing a CD with this unit, you
can also control external CD/MD units.
Playing a disc
(With this unit)
Press Z to open the front panel, and
insert the disc (labeled side up).
The front panel closes and playback starts
automatically.
If a disc is already inserted, press (SOURCE)
repeatedly until “CD” appears to start playback.
Note
The front panel closes automatically after the caution
alarm sounds.
Operation by the card remote commander:
Operation by the main unit:
*1 Pause is available only when playing back on this
unit (when playing back on the optional unit, pause
is not available). To cancel pause, press (6)
(PAUSE) again.
*2 To skip tracks continuously, press < or ,, then
press again and hold within about 2 seconds.
*3 Available only when an MP3 file is played.
Notes
There is a delay for a few seconds after pressing Z
before the disc is ejected, while the data in the disc
is being read.
If you press Z on the front panel to eject a disc and
leave it in the slot, the disc protective function will
work. The ejected disc will be automatically pulled
into the slot 15 seconds after being ejected.
Do not apply excessive pressure to the front panel
(especially when it is open), as this may cause a
malfunction.
Depending on the recording method used on the
disc, it may take a minute or more before playing the
first track.
Depending on the condition of the disc, it may not
play back (page 7, 8).
While the first/last track on the disc is playing, if <
or , is pressed, playback skips to the last/first track
of the disc.
When the last track on the disc has finished,
playback restarts from the first track of the disc.
To
Pause*
1
Press (6) (PAUSE).
Stop playback Press (OFF).
Eject the disc Press (OPEN/CLOSE).
Skip tracks*
2
Automatic
Music Sensor
Press </,
[once for each track].
Fast-forward/
reverse
Manual Search
Press </,
[hold until the desired
point].
Skip albums*
3
Album selection
Press M/m
[hold until the desired
album].
Skip discs
Disc selection
Press M/m
[once for each disc].
To
Stop playback Press (OFF).
Eject the disc Press Z.
Skip tracks
Automatic Music
Sensor
Rotate the R dial
[until the desired track].
Skip albums*
3
Album selection
Press (ENTER), then rotate
the R dial
[until the desired album].
Skip discs
Disc selection
Press (ENTER), then rotate
the R dial
[until the desired disc].
15
(With optional unit)
1 Press (SOURCE) repeatedly until “CD,
“MD,” or “MS*” appears.
2 Press (MODE) repeatedly until the
desired unit appears.
Playback starts.
* MS: MG Memory Stick System-up Player MGS-X1.
Cautions when connecting MGS-X1 and MD unit(s)
This unit recognizes MGS-X1 as an MD unit.
When you want to play MGS-X1, press (SOURCE) to
select “MS” or “MD.When “MS” appears in the
source display, MGS-X1 starts to play. When “MD”
appears in the source display, press (MODE) to
select “MS,” to start playback.
When you want to play an MD unit, press (SOURCE)
to select “MD” or “MS.” When your desired MD unit
appears in the source display, it starts to play. When
“MS” or another MD unit appears in the source
display, press (MODE) to select your desired MD
unit, to start playback.
Notes when playing back a disc with non-audio CD
data/MP3 file
If a disc with non-audio CD data/MP3 file is inserted:
– in the case of this unit, “Disc NO Music” appears in
the display, and the display becomes the clock
display (CD playback stops).
– in the case of an optional MP3 compatible CD unit,
“Disc NO Music” appears in the display and
playback of the next disc starts.
– in the case of an optional CD unit, which is
incompatible with MP3, the disc will play back with
no sound.
Note
With an optional unit connected, playback of the same
source will continue to the optional CD/MD unit.
Display items
Information on the disc/album/track currently
selected is automatically displayed.
If the AutoScroll function is set to on, text
information exceeding 16 characters will be
scrolled.
Positions of display items differ depending on
the selected face pattern.
For details, See “Selecting the face pattern” on
page 22.
When “Skin1” is selected.
When “Skin2” is selected.
When “Skin3” is selected.
A Source/Unit number*
1
B Disc name*
2
/Artist name/Album (folder)
name*
3
/Track (file) name*
3
/ID3 tag
information*
3
C Function and mode status
BBE:BBE MP
: Shuffle playback
: Repeat playback
:ATT
LP2: LP2 playback*
4
LP4: LP4 playback*
4
:DSO
:EQ7
D :Disc number/ :Album number*
3
/
:Track number/Elapsed playing time,
Current status/Message
continue to next page t
A B C
D
A D C
B
A DB
C
16
*1 Available only when two or more optional CD (MD)
units are connected.
*2 Only when the disc has been labeled by this unit
using the Disc Memo function.
*3 Available only when an MP3 file is played.
*4 Available only when an optional MD unit with the
MDLP function is connected, and an MDLP disc is
played.
Scrolling the text information
— Auto Scroll
Set “Auto Scroll” in “Display” to “ON.
To cancel scrolling the text information, set to
“OFF.
Notes
Some characters cannot be displayed.
For some CD TEXT discs or ID3 tags with very
many characters, some information may not be
displayed or scroll.
This unit cannot display the artist name for each
track of a CD TEXT disc.
Notes on MP3
When playing MP3 with ID3 tag, the ID3 tag
information (artist name/album name/track name) is
displayed.
This unit can read ID3 tag version 1.0, 1.1, 2.2, 2.3
and 2.4.
Some characters and signs cannot be displayed
(appear as “ x”). The maximum number of
displayable characters for an album (folder) name/
track (file) is 50 (Romeo) or 32 (Joliet); ID3 tag 30
characters (1.0 and 1.1) or 50 characters (2.2, 2.3
and 2.4).
The ID3 tag character codes comply with ASCII and
ISO 8859-1 standards. Joliet format discs can only
be displayed in ASCII. Incompatible characters will
be displayed asx.”
In the following cases, elapsed playing time may not
be displayed accurately.
– when an MP3 file of VBR (variable bit rate) is
played.
– during fast-forward/reverse.
Playing tracks repeatedly
— Repeat
You can select:
Track — to repeat the current track.
•Album*
1
— to repeat the tracks in the current
album.
•Disc*
2
— to repeat the tracks in the current
disc.
*1 Available only when an MP3 file is played.
*2 Available only when one or more optional CD/MD
units are connected.
During playback, press (1) (REP)
repeatedly until the desired playback
mode appears.
Repeat Play starts.
To return to normal play mode, press (1) (REP)
repeatedly to select “OFF.
Tip
You can also select the repeat play mode by using the
main menu. During playback, press (MENU), then set
“Repeat” in “PlayMode” to the desired playback mode.
17
Playing tracks in random
order
— Shuffle
You can select:
Album*
1
— to play the tracks in the current
album in random order.
Disc — to play the tracks on the current disc in
random order.
Magazine*
2
— to play the tracks in the current
optional CD (MD) unit in random order.
•ALL*
3
— to play all the tracks in all the
connected CD (MD) units (including this unit)
in random order.
*1 Available only when an MP3 file is played.
*2 Available only when one or more optional CD (MD)
units are connected.
*3 Available only when one or more optional CD units,
or two or more optional MD units are connected.
During playback, press (2) (SHUF)
repeatedly until the desired playback
mode appears.
Shuffle Play starts.
To return to normal play mode, press (2)
(SHUF) repeatedly to select “OFF.
Note
“ALL” will not shuffle tracks between CD units and MD
units.
Tip
You can also select the shuffle play mode by using the
main menu. During playback, press (MENU), then set
“Shuffle” in “PlayMode” to the desired playback mode.
Labeling a CD
— Disc Memo
You can label each disc with a custom name of
up to 16 characters. As a display item, the Disc
Memo always takes priority over any original CD
TEXT information.
Caution
Do not use the Disc Memo feature while driving,
or perform any other function which could divert
your attention from the road.
1 Start playing a disc you want to label.
2 Press (MENU).
3 Press < or , repeatedly to select
“Edit,” then press (ENTER).
4 Press < or , repeatedly to select
“Name Edit,” then press (ENTER).
5 Enter the characters.
1 Press < or , repeatedly to select
the desired character, then press
(ENTER).
2 Repeat step 1 to enter entire name.
To move the cursor, select “C” or “c,” then
press (ENTER).
To delete the entered character, select
“BS, then press (ENTER).
3 To finish, press < or , repeatedly
to select “END,” then press
(ENTER).
6 Press (MENU).
The display returns to the normal display.
Note
To finish labeling in step 5, be sure to select “END”
then press (ENTER), otherwise the Disc Memo will not
be stored.
Tips
Simply overwrite or enter a blank space to correct or
erase a character.
The Disc Memo can store up to 50 disc names in the
memory of this unit (When 50 disc names are
already stored, “Name Edit” does not appear in the
menu).
The Disc Memo will be stored in the memory of this
unit, and the CUSTOM FILE functions of the CD unit
connected are not available with this unit.
continue to next page t
18
Erasing the Disc Memo
— Name Delete
1 During playback, press (MENU).
2 Press < or , repeatedly to select
“Edit,” then press (ENTER).
3 Press < or , repeatedly to select
“Name Delete,” then press (ENTER).
4 Press < or , repeatedly to select
“Select,” then press (ENTER).
The stored names appear.
5 Press M or m repeatedly to select the
desired name to delete, then press
(ENTER).
The confirmation display appears.
6 Press < or , to select “YES,” then
press (ENTER).
“Complete” appears, and the name is deleted.
7 Press (MENU).
The display returns to the normal display.
To delete all the disc names, select “ALL” in step
4.
Note
When the Disc Memo for a CD TEXT disc is deleted,
the original CD TEXT information is displayed.
Tips
In step 3, if there is no Disc Memo, the display will
return to the previous display automatically.
If all the Disc Memo is deleted in step 6, the display
will return to the previous display automatically.
Locating a disc by name
— Disc List
(With an optional CD unit, or an MD unit)
You can use this function for discs that have been
assigned custom names*
1
or for CD TEXT
discs*
2
.
1 During playback, press (MENU).
2 Press < or , repeatedly to select
“List, then press (ENTER).
The Disc List appears.
3 Press M or m repeatedly to select the
desired disc, then press (ENTER).
Playback starts.
*1 Locating a disc by its custom name: when you
assign a name for a CD (page 17).
*2 Locating discs by the CD TEXT information: when
you play a CD TEXT disc on a CD unit with the CD
TEXT function.
Note
In the case of CD TEXT discs and MDs, some
characters cannot be displayed.
19
Radio
The unit can store up to 6 stations per band
(FM1, FM2, FM3, AM1, and AM2).
Caution
When tuning in stations while driving, use Best
Tuning Memory to prevent accidents.
Storing stations
automatically
— BTM (Best Tuning Memory)
The unit selects the stations with the strongest
signals within the selected band, and stores them
in order of frequency.
1 Press (SOURCE) repeatedly to select
the radio.
2 Press (MODE) repeatedly to select the
desired band.
3 Press (MENU).
4 Press < or , repeatedly to select
“Edit,” then press (ENTER).
5 Press < or , repeatedly to select
“BTM, then press (ENTER).
Stations with the strongest signals are stored.
To cancel storing, press (ENTER) while
storing the stations.
6 Press (MENU).
The display returns to the normal display.
Notes
If only a few stations can be received due to weak
signals, some stored preset numbers will retain their
former settings.
The unit starts storing stations from the preset
number currently selected.
Display items
Information on the station/frequency currently
selected is automatically displayed.
Positions of display items differ depending on
the selected face pattern.
For details, see “Selecting the face pattern” on
page 22.
When “Skin1” is selected.
When “Skin2” is selected.
When “Skin3” is selected.
A Source/Band number
B Station name*
C Function and mode status
ST: Stereo reception mode
:ATT
:DSO
:EQ7
D :Preset number/Frequency, Current status/
Message
* Only when the station name has been assigned.
See “Storing station names” on page 21.
A B C
D
A D C
B
A DB
C
20
Receiving the stored stations
1 Press (SOURCE) repeatedly to select
the radio.
2 Press (MODE) repeatedly to select the
desired band.
Radio reception of the desired band starts.
Operation by the card remote commander:
Operation by the main unit:
* To stop searching, rotate the R dial in the reverse
direction.
Tip
If automatic tuning stops too frequently, set “Local” in
“PlayMode” to “ON.” Only the stations with relatively
strong signal will be tuned in (Local seek mode).
If FM stereo reception is poor
— Mono
Set “Mono” in “PlayMode” to “ON.
The sound improves, but becomes monaural.
To restore stereo reception, set to “OFF.
Note
If interference occurs, this unit will automatically
narrow the range of reception frequency to eliminate
noise (IF Auto function). In such cases, some FM
stereo broadcasts may become monaural while in the
stereo reception mode.
Tips
To always hear FM stereo broadcasts in stereo, set
“IF Switch” in “PlayMode” to “WIDE.” Note that some
interference may occur in this setting.
For details, see “PlayMode menu” on page 38.
If FM broadcasts are difficult to hear, set “DSO” in
“Sound” to “OFF” (page 30).
Storing only desired stations
You can manually preset the desired stations on
any chosen preset memory.
1 Press (SOURCE) repeatedly to select
the radio.
2 Press (MODE) repeatedly to select the
desired band.
3 Press < or , to tune in the station
that you want to store.
4 Press the desired number button ((1)
to (6)) for 2 seconds until “Memory”
appears.
The number of the button you pressed is
displayed, and then the selected station is
assigned to this number and stored.
Note
If you try to store another station on the same stored
number, the previously stored station will be erased.
To
Stop radio
reception
Press (OFF).
Receive stored
stations
Preset search
Press (1) to (6).
Press M/m
[until the desired station].
Search stations
Automatic tuning
Press </,
[until the desired station].
Specify
frequencies
Manual tuning
Press </,
[hold until the desired
frequency].
To
Stop radio
reception
Press (OFF).
Receive stored
stations
Preset search
Rotate the R dial
[until the desired station].
Search stations
Automatic tuning
Press (ENTER) once, then
rotate the R dial*
[until the desired station].
Specify
frequencies
Manual tuning
Press (ENTER) twice, then
rotate the R dial
[until the desired
frequency].
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92

Sony CDX-M9900 Mode d'emploi

Catégorie
Lecteur CD
Taper
Mode d'emploi

dans d''autres langues