Samsung SC21F60WE Manuel utilisateur

English

Vacuum Cleaner

user manual

Thank you for purchasing a Samsung product.

SC21F60* SERIES

✻ Before operating this unit, please read the instructions carefully.

✻ For indoor use only.

DJ68-00698M-03.indb 1 2015. 1. 15. �� 11:08

English - 2

safety information

SAFETY INFORMATION

WARNING

• Before operating the appliance, please read this manual thoroughly and retain it for your

reference.

WARNING

• Because these following operating instructions cover various models, the characteristics of

your vacuum cleaner may differ slightly from those described in this manual.

CAUTION/WARNING SYMBOLS USED

WARNING

Indicates that a danger of death or serious injury exists.

CAUTION

Indicates that a risk of personal injury or material damage exists.

OTHER SYMBOLS USED

Represents something you must NOT do.

Represents something you must follow.

Indicates that you must disconnect the power plug from the socket.

• This vacuum cleaner is designed for domestic household use only.

Do not use this vacuum cleaner to clean building waste and debris.

Regularly keep the ﬁlters in clean conditions to prevent of collecting ﬁne dust in them.

Do not use this vacuum cleaner with any of the ﬁlters removed.

Failure to meet these requirements could cause damage to the internal parts and

void your warranty.

WARNING

DJ68-00698M-03.indb 2 2015. 1. 15. �� 11:08

English - 3

IMPORTANT SAFEGUARDS

GENERAL

• Read all instructions carefully.

Before switching on, make sure that the voltage of your

electricity supply is the same as that indicated on the rating plate

on the bottom of the cleaner.

• WARNING : Do not use the vacuum cleaner when rug or ﬂoor is

wet. Do not use to suck up water.

• Close supervision is necessary when any appliance is used by or

near children.

Do not allow the vacuum cleaner to be used as a toy.

Do not allow the vacuum cleaner to run unattended at any time.

Use the vacuum cleaner only for its intended use as described in

these instructions.

• Do not use the vacuum cleaner without a dust bin.

Empty the dust bin before it is full in order to maintain the best

efﬁciency.

• Do not use the vacuum cleaner to pick up matches, live ashes or

cigarette butts. Keep the vacuum cleaner away from stoves and

other heat sources.

Heat can deform and discolour the plastic parts of the unit.

• Avoid picking up hard, sharp objects with the vacuum cleaner as

they may damage the cleaner parts.

Do not stand on the hose assembly.

Do not put weight on the hose.

Do not block the suction or the exhaust port.

• Switch the vacuum cleaner off on the body of the machine

before unplugging from the electrical outlet.

Disconnect the plug from the electrical outlet before emptying

the dust bin.

To avoid damage, please remove the plug by grasping the plug

itself, not by pulling on the cord.

safety information

DJ68-00698M-03.indb 3 2015. 1. 15. �� 11:08

English - 4

• This appliance can be used by children aged from 8 years and

above and persons with reduced physical, sensory or mental

capabilities or lack of experience and knowledge if they have

been given supervision or instruction concerning use of the

appliance in a safe way and understand the hazards involved.

Children shall not play with the appliance.

Cleaning and user maintenance shall not be made by children

without supervision.

• Children should be supervised to ensure that they do not play

with the appliance.

• The plug must be removed from the socket outlet before

cleaning or maintaining the appliance.

• The use of an extension cord is not recommended.

• If your vacuum cleaner is not operating correctly, switch off the

power supply and consult an authorized service agent.

• If the supply cord is damaged, it must be replaced by the

manufacturer or its service agent or a similarly qualiﬁed person in

order to avoid a hazard.

• Don’t carry the vacuum cleaner by holding the hose.

Use the handle on the vacuum cleaner set.

• Unplug the cleaner when not in use.

Turn off the power switch before unplugging.

• Do not use to suck up water.

• Do not immerse in water for cleaning.

• The hose should be checked regularly and must not be used if

damaged.

• The vacuum cleaner handle contains electrical connections the

handle is not a serviceable part.

• The current carrying hose handle contains electrical connections

is not a serviceable part by user.

• Please contact the manufacturer or service center for a

replacement.

DJ68-00698M-03.indb 4 2015. 1. 15. �� 11:08

English - 5

UV BRUSH

• Since the UV rays from the UV Brush damage skin and eyes,

never allow the rays to make contact with skin or eyes and do

not let children or the elderly use the UV Brush.

It may damage your eyesight.

• If the transparent window is broken and the UV rays are exposed

directly, turn the power off and contact the service center.

• Do not use the UV Brush for purposes other than the sterilization

of mattresses, bedclothes, beds, cushions and so on made from

material.

The company will not be held liable for any loss due to accidents

from using the UV Brush for purposes other than its original

purpose as listed above.

• Do not sit on the UV Brush or drop it, and avoid imparting

impacts on the product.

Failing to do so may result in injury or product damage.

• Do not touch the power terminals on the back of the UV Brush

with a metal pin or rod.

This may result in electric shock or ﬁre.

• When the UV lamp is out of order, never disassemble or modify

the product yourself. Please contact the manufacturer or service

center for a replacement.

• Since an internal discharge occurs within the UV Brush, never

use the product near an inﬂammable spray or substance.

• Take care not to touch the UV lamp window after using the

UV Brush for an extended period of time as the surface of the

window may be hot.

• The UV Brush may start slowly at a low temperature due to the

inherent characteristics of UV lamps.

Please keep the UV Brush indoors.

DJ68-00698M-03.indb 5 2015. 1. 15. �� 11:08

English - 6

contents

ASSEMBLING THE CLEANER

07

OPERATING THE CLEANER

08

08 Power cord

08 ON/OFF Switch

09 Power control

11 Using the UV brush (SC21F60YG Series)

MAINTAIN TOOLS AND FILTER

12

12 Using accessory

14 Maintain ﬂoor tools

16 Dust full indicator

16 Changing the dust bag

16 Cleaning inlet ﬁlter

17 Cleaning outlet ﬁlter

17 Change the battery (remote-control type)

TROUBLESHOOTING

18

DJ68-00698M-03.indb 6 2015. 1. 15. �� 11:08

English - 7

ASSEMBLING THE CLEANER

• For storage, park the ﬂoor nozzle.

assembling the cleaner

OPTION

DJ68-00698M-03.indb 7 2015. 1. 15. �� 11:08

English - 8

POWER CORD

CAUTION

• When removing the plug from the electrical outlet, grasp the plug, not the

cord.

ON/OFF SWITCH

operating the cleaner

DJ68-00698M-03.indb 8 2015. 1. 15. �� 11:08

English - 9

OPERATING THE CLEANER

POWER CONTROL

Remote-control type SC21F60J*, SC21F60Y* Series

HOSE (SC21F60J* Series)

1. ON/OFF ( ) Button

- Press the ON/OFF button to operate the vacuum cleaner.

Press again to stop the vacuum cleaner.

2. Suction (-), (+) Button

- Press the (+) button to operate the vacuum to highsuction

power. Press the (-) button to operate the vacuum to low

suction power.

(ON) MIN

→

MID

→

MAX

If no button is pressed for 30 minutes while cleaning, the safety device is activated and the

power is cut off. In this case, press the [Power] button on the main unit or unplug and then plug

the power cord in again.

HOSE (SC21F60Y* Series)

1. ON/OFF ( ) Button

- Press the ON/OFF button to operate the vacuum cleaner.

Press again to stop the vacuum cleaner.

2. SUCTION (-/+) Button

- Press the [SUCTION (-/+)] button to increase or decrease the

suction power. Each time you press the button, you gradually

increase the suction power. After the suction power reaches its

maximum, the next time you press the button, you return the

suction power to its minimum.

(ON) MIN

→

MID

→

MAX

3. BRUSH ON/OFF Button

- Press the [BRUSH ON/OFF] button to operate the UV Brush. Press again to stop the UV Brush.

If no button is pressed for 30 minutes while cleaning, the safety device is activated and the

power is cut off. In this case, press the [Power] button on the main unit or unplug and then plug

the power cord in again.

Handle Control

The cleaner is controlled by radio

frequency signals.

Handle Control

The cleaner is controlled by radio

frequency signals.

DJ68-00698M-03.indb 9 2015. 1. 15. �� 11:08

English - 10

BODY

Press the power ON/OFF button repeatedly to start and to stop

the vacuum cleaner. (OFF → ON → OFF)

If the remote handle control is not working, the cleaner

can be operated using the ON/OFF button on the body

of the machine.

(1) (2)

(1) The icon lights up blue when the power source is connected.

(2)

If the ﬁlter check indicator turns red, check and eliminate possible blockages in brushes,

pipe, hoses, ﬁlters and if necessary. Empty and replace dust bag.

Body-control type (SC21F60W* Series)

HOSE

To reduce suction for leaning draperies, small rugs, and other light

fabrics, pull the tap air until the hole is open.

BODY

To control power level, just slide the power control right and left.

MIN = For delicate fabrics, e.g.net curtains.

MAX = For hard ﬂoors and heavily soiled carpets.

(1)

If the ﬁlter check indicator turns red, check and eliminate possible blockages in brushes,

pipe, hoses, ﬁlters and if necessary. Empty and replace dust bag.

DJ68-00698M-03.indb 10 2015. 1. 15. �� 11:08

English - 11

OPERATING THE CLEANER

USING THE UV BRUSH (SC21F60Y* SERIES)

1. Insert the brush into the hose handle.

• Insert the UV brush securely into the hose handle until you hear a “clicking”

sound.

2. Press the [BRUSH ON/OFF] button to use UV Brush.

• Press the [Suction -/+] button to start cleaning and choose the

appropriate suction strength.

• Press the [BRUSH ON/OFF] button.

• UV sterilization cannot be activated by itself.

3. When you have ﬁnished UV cleaning, press the [ ] button.

• Press the [ ] button to stop the cleaner.

- For safety reasons, UV brushing only runs for 30 minutes and then stops

operating. To resume the operation, press the [SUCTION (-/+)] button

again.

The UV brush, which is inserted into the hose handle (not directly connected to the telescopic

pipe), is dedicated for bedclothes.

CAUTION

DJ68-00698M-03.indb 11 2015. 1. 15. �� 11:08

English - 12

USING ACCESSORY

Pipe

• Adjust the length of the telescopic pipe by sliding the length

control button located in the center of the telescopic pipe back

and forth.

• To check for blockages, separate the telescopic pipe and adjust to

shorten. This allows for easier removal of waste clogging the tube.

Accessory

• To use the crevice tool, push the accessory on to the

end of the hose handle in the opposite direction.

• Pull out the button, to use the dusting brush.

• To use the upholstery tool, push the accessory on to

the end of the hose handle.

maintain tools and ﬁlter

DJ68-00698M-03.indb 12 2015. 1. 15. �� 11:08

English - 13

MAINTAIN TOOLS AND FILTER

Accessory

• Push the accessory onto the end of the hose handle.

• Pull out the dusting brush to use the crevice tool.

• Push the accessory onto the end of the pipe.

• Pull out the dusting brush to use the crevice tool.

DJ68-00698M-03.indb 13 2015. 1. 15. �� 11:08

English - 14

MAINTAIN FLOOR TOOLS

2-Step Brush

Carpet Cleaning Floor Cleaning

• Adjust the inlet lever according to the ﬂoor surface.

• Remove waste matter completely if the inlet is blocked.

Power Pet Plus Brush (Option)

For improved pickup of pet

hair and ﬁbre on carpets.

1 2 3

54 6

• Frequent vacuuming of hair or pet fur may cause a falling-off of the rotation due to matters tangled

around.

1. Push the Open button of the transparent screen cover to separate the cover.

2. Remove the brushbar from the transparent screen.

3. Remove waste matter such as dust and hair tangled around the brushbar using scissors.

4. Remove dust inside the brush housing using a dry duster or crevice tool.

5. Insert brushbar into rotating belt and assemble.

6. Click the transparent screen cover back into place to reassemble.

Parquet Master Brush (Option)

• Vacuum dust in wide area at once.

• Remove waste matter completely if the inlet is blocked.

DJ68-00698M-03.indb 14 2015. 1. 15. �� 11:08

English - 15

MAINTAIN TOOLS AND FILTER

To remove dust from the dust bin of the UV brush (SC21F60YG Series)

When you notice that the dust bin is ﬁlled, use the [Dust Removal] button to empty the dust bin.

1. To remove dust from the dust bin, move the [Dust Removal] button

to the “Open” position.

- While the cleaner is operating (suction), use the [Dust Removal]

button for this purpose.

2. When done, move the [Dust Removal] button to the “Close”

position.

- When the [Dust Removal] button is in the “Open” position, the

suction power of the cleaner is reduced.

• Frequent vacuuming of hair or pet fur may cause a falling-off of the rotation due to matters tangled

around.

Cleaning the UV brush (Cleaning the drum) (SC21F60YG Series)

You should check your vacuum cleaner’s Brush roll regularly. Strings, hair and carpet ﬁbers can wrap

around the brush and hamper its ability to clean. To prevent this you should clean the brush.

1. Push the [Open Transparent Cover] button inward to remove the

cover.

2. Use the crevice tool to remove impurities such as dust and hair

from the brush roll.

3. When done, push the button outward to close the cover.

DJ68-00698M-03.indb 15 2015. 1. 15. �� 11:08

English - 16

DUST FULL INDICATOR

Remote-control type Body-control type

• Frequent vacuuming of hair or pet fur may cause a falling-off of the rotation due to matters tangled

around. The lamp will turn red when suction is reduced. If the light comes on, please change the bag.

CHANGING THE DUST BAG

1 2 3 4

You can purchase dust bags in the shops where you bought this vacuum cleaner or authorized

SAMSUNG service center.

CLEANING INLET FILTER

1 2 3 4

Don’t throw away the ﬁlter.

DJ68-00698M-03.indb 16 2015. 1. 15. �� 11:08

English - 17

MAINTAIN TOOLS AND FILTER

CLEANING OUTLET FILTER

1

2

3

• Please replace the ﬁlter 1~2 times a year.

• When suction is noticeably reduced continuously or vacuum cleaner abnormally overheats,

please clean the outlet ﬁlter. Note. Do not wash HEPA ﬁlter.

If cleaning does not resolve the problem Please replace blocked out ﬁlter.

• Replacement ﬁlters are available at your local Samsung distributor.

CHANGE THE BATTERY (REMOTE-CONTROL TYPE)

• When the vacuum cleaner does not work, replace the

batteries. If the problem persists, please contact our

authorized dealer.

• Use 2 batteries of size AAA.

• Never disassemble or recharge the batteries.

• Never heat up the batteries or throw them into ﬁre.

• Do not reverse (+), (-) poles.

• Dispose of the batteries property.

BATTERY TYPE : AAA Size

CAUTION

DJ68-00698M-03.indb 17 2015. 1. 15. �� 11:08

English - 18

troubleshooting

PROBLEM SOLUTION

Motor does not start.

• Check cable, plug and socket.

• Leave to cool.

Suction force is gradually

decreasing.

• Check for blockage and remove.

Cord does not rewind

fully.

• Pull the cord out 2-3m and push down the cord rewind button.

Vacuum cleaner does not

pick up dirt.

• Check hose and replace if required.

Low or decreasing

suction.

• Please check ﬁlter and, if required, clean as illustrated in the

instructions. if ﬁlters are out of condition change them to new ones.

Body overheating. • Please check ﬁlters, if required clean as illustrated in the instruction.

Static electicity

discharge.

• Please decrease power suction.

• This can also occur when air in the room is very dry.

Please ventilate the room to air humidity become a normal.

This Vacuum cleaner is approved the following.

EMC Directive : 2004/108/EEC

Low Voltage Directive : 2006/95/EC

DJ68-00698M-03.indb 18 2015. 1. 15. �� 11:08

memo

DJ68-00698M-03.indb 19 2015. 1. 15. �� 11:08

DJ68-00698M-03.indb 20 2015. 1. 15. �� 11:08

La page charge ...

Samsung SC21F60WE Manuel utilisateur

Samsung SC21F60WE Manuel utilisateur

dans d''autres langues

Documents connexes