Midea MRT18B2ASL Manuel utilisateur

Catégorie
Congélateurs
Taper
Manuel utilisateur
Refrigerator
TOP MOUNTED FREEZER SERIES
MRT18B2ASL
USER MANUAL
Warning notices: Before using this product, please read this manual carefully and keep it for future reference.
The design and specifications are subject to change without prior notice for product improvement.
Consult with your dealer or manufacturer for details.
The diagram above is just for reference. Please take the appearance of the actual product as the standard.
02
EN
THANK YOU LETTER
Thank you for choosing Midea! Before using your new Midea product, please read
this manual thoroughly to ensure that you know how to operate the features and
functions that your new appliance offers in a safe way.
CONTENTS
THANK YOU LETTER ------------------------------------------- 02
SPECIFICATIONS ------------------------------------------------ 03
PRODUCT OVERVIEW ----------------------------------------- 04
PRODUCT INSTALLATION ----------------------------------- 05
OPERATION INSTRUCTIONS -------------------------------- 12
CLEANING AND MAINTENANCE --------------------------- 15
TROUBLESHOOTING ------------------------------------------- 17
WARRANTY ------------------------------------------------------- 19
03
EN
SPECIFICATIONS
Rated Voltage 115V
Rated Frequency 60Hz
Rated Current 1.2A
Defrost Power 180W
Refrigerant, Amount R600a, 1.73oz(49g)
Foaming Agent Cyclopentane
04
EN
PRODUCT OVERVIEW
Names of components
1Shelf 4Fruits and vegetables box
2Freezer temperature control 5Door tray
3Display control panel 6Storage box
ATTENTION
The picture above is only for reference. The actual conguration will depend on the physical
product or statement by the distributor.
05
EN
PRODUCT INSTALLATION
Install Instruction
Dimensions and Clearances
Too small of a distance from adjacent items may result in the degradation
of freezing capability and increased electricity costs. Allow over 100 mm of
clearance from each adjacent wall when installing the appliance.
>100mm
>100mm
>100mm
>100mm
>100mm
>100mmm
Top View
Required space
for air circulation
ATTENTION
The picture above is only for reference. The actual conguration will depend on the physical
product or statement by the distributor.
06
EN
Space requirement diagram (when the door is open and when the door is closed)
B
AC
D
B
E
135 °
Width Overall
Height Depth
Width
doors open
135o
Depth
doors open
135o
A B C D E
750 1692 785 1270 1289
Notice: All dimensions in mm
07
EN
Door right-left change(Optional)
List of tools to be provided by the user
Allen wrench-Cross screwdriver
Putty knife Thin-blade screwdriver
5/16 socket spanner
Masking tape
1. Unplug your refrigerator and remove all food from the door shelves. Remove all food from
the inner door liner. Fix the door by tape.
2. Remove the hole cover and the right top hinge cover, then unscrew screws
and remove the right top hinge. Keep the screws to reuse.
3. Lift the freezer door up and away from your refrigerator.
4. Unscrew screws of middle hinge, remove the hinge, then lift the refrigerator
door up and away from your refrigerator. Save the screws to reuse.
Hole cap Right top hinge cover
Top Right hinge
Right door self-locking block
Right door open stopper
Middle right hinge
08
EN
5. Unscrew screws of the bottom hinge, then remove the bottom hinge from the
bottom right side of the refrigerator.
6. Unscrew the hinge shaft from the right side of the bottom hinge and move it
to the left side, then secure the bottom hinge to the bottom left side of the
refrigerator, using the screws you removed previously.
7. Remove the sleeves from the top right of doors and hole cap from top left of
doors, and assemble them on the opposite sides.
8. Remove the refrigerator door open bottom stopper and install it other side of
the door. Remove the freezer right door self-locking block and right door open
stopper and save. Them to reuse take out the left freezer self-locking block
and left door open stopper from the accessory bag in the refrigerator and
installed on the left of freezer door.
Hinge shaft
Bottom hinge
Left door self-locking block
Left door open stopper
Top sleeves
Hole cap
Sleeves
Bottom stopper
09
EN
9. Install the refrigerator door vertically onto the bottom hinge. Take out the
middle left hinge from the accessory bag then assemble the middle left hinge
on the left side of the refrigerator.
10. Install the freezer door vertically into the center hinge. Take out the left top
hinge and left top hinge cover from accessory bag, assembly left top hinge,
left top hinge cover and hole cover.
ATTENTION
The picture above is only for reference. The actual conguration will depend on the physical
product or statement by the distributor.
Left top hinge cover
Top left hinge
Hole cap
Middle left hinge
10
EN
Installing the door handle(Optional)
Parts included with the handle kit:
You will need: A Phillips screwdriver and the included Allen wrench.
1. Insert the two Phillips-head screws into the refrigerator door on the side you
prefer, then tighten.
2. Align the door handle with the screws.
3. Insert the two Allen-head screws through the side of the door handle and
tighten with the Allen wrench.
4. Place the screw caps on the screws.
ATTENTION
The picture above is only for reference. The actual conguration will depend on the physical
product or statement by the distributor.
Installing an optional ice maker
The refrigerator comes set up for ice maker installation, This refrigerator is
compatible with Midea IM1900MD ice maker. Please refer to individual ice maker
installation instruction manual.
WARNING: Connect to potable water supply only.
Minimum/Maximum inlet water pressure: 138/827 kPa (20/120 psig).
Screws (4) Allen wrenchHandle assembly Allen wrench
caps (4)
Allen wrench
screws (4)
11
EN
Leveling feet
To avoid vibration, the unit must be leveled.
If required, adjust the leveling screws to compensate for the uneven oor.
The front should be slightly higher than the rear to aid in door closing.
Leveling screws can be turned easily by tipping the cabinet slightly.
Turn the leveling screws counterclockwise to raise the unit, clockwise to
lower it.
Changing the light
Any replacement or maintenance of the lamps is intended to be made by the
manufacturer, its service agent or similar qualied person.
Connecting the appliance
After installing the appliance, connect the power plug into a socket outlet.
ATTENTION
After connecting the power supply cord (or plug) to the outlet, wait 2 or 3 hours before you
put food into the appliance. If you add food before the appliance has cooled completely, your
food may spoil.
Tips for energy saving
Do not place the appliance near cookers, radiators or other heat sources. If the
ambient temperature is high, the compressor will run more frequently and for
longer, resulting in increased energy consumption.
Ensure that there is sufcient ventilation at the base of the appliance, on the sides
of the appliance and at the back of the appliance. Never cover ventilation openings.
Please also observe the spacing dimensions in the chapter “Installation”.
The arrangement of drawers, shelves and racks as shown in the illustration offers the
most efcient use of energy and should therefore be retained as far as possible. All
drawers and shelves should remain in the appliance to keep the temperature stable
and save energy.
To obtain a larger storage space (e.g. for large refrigerated/frozen goods), the
middle drawers can be removed. The top and bottom drawers and shelves should
be removed last if necessary.
An evenly lled refrigerator/freezer compartment contributes to optimal energy
use. Therefore, avoid empty or half-empty compartments.
Allow warm food to cool before placing it in the refrigerator/freezer. Food that has
already cooled down increases energy efciency.
Allow frozen food to defrost in the refrigerator. The coldness of the frozen food
reduces the energy consumption in the refrigerator compartment and thus increases
the energy efciency.
Open the door only as briey as necessary to minimise cold loss. Opening the door
briey and closing it properly reduces energy consumption.
The door seals of your appliance must be perfectly intact so that the doors close
properly and energy consumption is not increased unnecessarily.
12
EN
OPERATION INSTRUCTIONS
Control panal
1. Key
A. Setting button
2. Display screen
setting 1: LED1 COOL indicator
setting 2: LED2 indicator
setting 3: LED3 indicator
setting 4: LED4 indicator
setting 5: LED5 COOLEST indicator
setting 6: LED6 STANDBY mode
3. Display
Once initially powered on, the display screen is on full display for 3 seconds.
The refrigerator default setting is medium, and the LED 3 indicator will be
illuminated. This is normal operation display in case of a failure, the appropriate
LED light will ash in sequence. In case of no failures, the current temperature
setting of the refrigerator will be on display.
4. Temperature setting
Each time the temperature setting is pressed once, the temperature
setting changes one time.
After the temperature setting has been completed, the refrigerator will run
according to the set value after 25s. From left to right, the temperature is
lower.
The order of coldness settings is as follows:
5. Standby mode
To enter standby mode, press the setting for 3 seconds when the
refrigerator is running. In standby mode, the compressor will not operate and
the standby indicator light will be illuminated. To resume normal operation, just
press the setting momentarily.
13
EN
6. Setting the freezer temperature
Turn the controls to adjust the freezer temperature.
Place frozen food into the freezer as quickly as possible after purchase. Pay
attention to the storage time on the food packaging instructions. The storage
life of frozen foods varies and the recommended storage time should not be
exceeded.
When it is set at colder position, the temperature of freezing chamber will be
colder, but it causes the cooling capacity sent to refrigerating chamber will be
lower.
7. Fault indication
The following warnings appearing on the display indicate corresponding faults
of the refrigerator. Though the refrigerator may still haverefrigerator and
freezing function with the following faults, the user shall contact a maintenance
specialist for maintenance, so as to ensure normal use of the refrigerator.
Fault Code Fault Description
LED1 indicator and LED2 indicator Refrigerator temperature sensor circuit
LED1 indicator and LED3 indicator Freezer defrost sensor
LED1 indicator and LED4 indicator Ambient temperature sensor
Mid
COLD COLDER
TEMP.
CONTROL
14
EN
Tips on storing food
Freezer compartment
The freezer is designated for the storage of food frozen at very low temperature,
long-term storage of frozen food, and for the production of ice.
Only use the shelves in the door of the freezer to store frozen food, not for storing
hot food designated for freezing.
Do not put fresh and frozen food next to each other. The frozen food may thaw.
When freezing fresh food (such as meat, fish or chopped meat), cut them into parts
that can be used at the same time.
Storing frozen food: instructions are usually stated on the packages, which must be
followed. If there is no information on the packaging, food should not be stored for
longer than three months from the date of purchase.
When purchasing frozen food, make sure that it was frozen at a suitable
temperature and that the packaging is not damaged.
Frozen food should be kept in suitable packages to retain the quality and should be
returned to the freezer compartment as soon as possible.
If a package of frozen food shows moisture or abnormal bulging, it is probable that
it was stored at the wrong temperature and the content is spoiled.
The storage period for frozen food depends on the room temperature, the
thermostat setting, the frequency of opening the door of the freezer, the type of
food and the time of transporting the product from the shop to the household.
Always follow the instructions printed on the packaging and never exceed the
maximum storage time stated on the package.
Cooling compartment
To reduce moisture and subsequent ice build-up, never put liquid into the
refrigerator in unsealed containers. Frost tends to concentrate in the coolest parts
of the evaporator. Storing uncovered liquids results in a more frequent need for
defrosting.
Never put warm foods in the refrigerator. These should first cool down at room
temperature and then be placed so as to ensure adequate air circulation in the
refrigerator.
Foods or food containers should not touch the back wall of the refrigerator because
they could freeze to the wall. Do not keep regularly opening the door of the
refrigerator.
Meat and clean fish (packed in a package or plastic foil) can be placed in the
refrigerator, which can be used in 1–2 days.
Fruit and vegetables without packaging can be placed in the part designated for
fresh fruit and vegetables.
ATTENTION
The optimal temperature setting of each compartment depends on the ambient temperature.
Above optimal temperature is based on the ambient temperature of 25 °C.
15
EN
CLEANING AND MAINTENANCE
Defrost
The refrigerator is made based on the air-cooling principle and thus has
automatic defrosting function. Frost formed due to change of season or
temperature may also be manually removed by disconnection of the appliance
from power supply or by wiping with a dry towel.
Stop using
Power failure:
In case of power failure, even if it is in summer, foods inside the appliance can be
kept for several hours; during the power failure, the times of door opening shall
be reduced, and no more fresh food shall be put into the appliance.
Long-time nonuse:
The appliance shall be unplugged and then cleaned; then the doors are left open
to prevent odor.
Moving:
Before the refrigerator is moved, take all objects inside out, x the glass
partitions, vegetable holder, freezing chamber drawers and etc. with tape, and
tighten the leveling feet; close the doors and seal them with tape. During moving,
the appliance shall not be laid upside down or horizontally, or be vibrated; the
inclination during movement shall be no more than 45°.
The appliance shall run continuously once it is started. Generally, the operation of the
appliance shall not be Interrupted; otherwise the service life may be impaired.
Foods can be preserved for a couple of hours even in summer in case of power failure; it is
recommended to reduce the frequency of opening door.
ATTENTION
16
EN
Cleaning of door tray
According to the direction arrow in the gure
below, use both hands to squeeze the tray, and
push it upward, then you can take it out.
After washing the tray having been taken
out, you can adjust its installing height in
accordance with your requirement.
Cleaning of glass shelf
As the innermost part of the refrigerator liner
where contacting the shelves has a backstop,
you shall raise the shelves upward, then you
can be able to take it out.
Adjust or clean the shelves according to your
requirement.
Cleaning the vegetable drawer
1. Remove the contents of the drawer. Hold the
handle of the vegetable drawer and pull it out
completely until it stops.
2. Lift the vegetable drawer up and remove it by
pulling it out.
ATTENTION
Soft towels or sponge dipped in water and non-corrosive neutral detergents are suggested
for cleaning. The freezer of shall be nally cleaned with clean water and dry cloth. Open the
door for natural drying before the power is turned on. Do not use hard brushes, clean steel
balls, wire brushes, abrasives, such as toothpastes, organic solvents (such as alcohol, acetone,
banana oil, etc.), boiling water, acid or alkaline items clean refrigerator considering that this
may damage the fridge surface and interior.
17
EN
TROUBLESHOOTING
The following simple issues can be handled by the user. Please call the after-sale
service department if the issues are not solved.
Problem Possible reason
Failed operation
• Check whether the appliance is connected to power or
whether the plug is in well contact
• Check whether the voltage is too low
• Check whether there is a power failure or partial circuits have
tripped
Odor
• Odorous foods shall be tightly wrapped
• Check whether there is any rotten food
• Clean the inside of the refrigerator
Long-time operation
of the compressor
• Long operation of the refrigerator is normal in summer
When the ambient temperature is high It is not suggestible
having too much food in the appliance at the same time
• Food shall get cool before being put into the appliance
• The doors are opened too frequently
Light fails to get lit
• Check whether the refrigerator is connected to power supply
and whether the illuminating light is damaged
• Have the light replaced by a specialist
Door can not be
properly closed
• The door is stuck by food packages Too much food is placed
• The refrigerator is tilted.
Loud noises
Check whether the oor is level and whether the refrigerator
is placed stably
• Check whether accessories are placed at proper locations
18
EN
Problem Possible reason
Door seal fails to be
tight
• Remove foreign matters on the door seal
• Heat the door seal and then cool it for restoration (or blow it
with an electrical drier or use a hot towel for heating)
Water pan overows
• There is too much food in the chamber or food stored
contains too much water,resulting in heavy defrosting
• The doors are not closed properly, resulting in frosting due to
entry of air and increased water due to defrosting
Hot housing
• Heat dissipation of the built-in condenser via the housing,
which is normal when housing becomes hot due to high
ambient temperature, storage of too much food or shutdown
of the compressor is shut down, provide sound ventilation to
facilitate heat dissipation
Surface
condensation
• Condensation on the exterior surface and door seals of the
refrigerator is normal when the ambient humidity is too high.
Just wipe the condensate with a clean towel.
Abnormal noise
• Buzz: The compressor may produce buzzes during operation,
and the buzzes are loud particularly upon start or stop. This is
normal.
Creak: Refrigerant owing inside of the appliance may
produce creak, which is normal.
2023
19
WARRANTY
MIDEA
REFRIGERATOR
LIMITED
WARRANTY
ATTACH YOUR RECEIPT HERE. PROOF OF PURCHASE
IS REQUIRED TO OBTAIN WARRANTY SERVICE.
Please have the following information available when you
call the Customer Service Center:
Name, address and telephone number
Model number and serial number
A clear, detailed description of the problem
Proof of purchase including dealer or retailer
name and address
IF YOU NEED SERVICE:
1. Before contacting us to arrange service, please determine whether your product requires
repair. Some q uestions can be addressed without service. Please take a few minutes to review
the Troubleshooting section of the User Manual, or visit https://www.midea.com/ca/support
2. All warranty service is provided exclusively by our authorized Midea Service Providers, in the
U.S. and Canada.
Midea Customer Service
In the U.S.A. or Canada, call 1-866-646-4332.
If outside the 50 States of the United States or Canada, contact your authorized Midea dealer to
determine whether another warranty applies.
1 YEAR PARTS AND LABOR
WHAT IS COVERED
FIRST YEAR LIMITED WARRANTY (PARTS AND LABOR)
Midea will repair or replace, without charge, any defects due to faulty materials or workmanship for
one full year from the date of purchase. For further detail of warranty coverage and warranty
repair information, visit https://www.midea.com/ca or call 1-866-646-4332.
C onsumer will be responsible for:
Diagnostics, removal, transportation and reinstallation cost required because of service.
Costs of service calls that are a result of items listed under NORMAL RESPONSIBILITIES
OF THE CONSUMER**
NORMAL RESPONSIBILITIES OF THE CONSUMER**
This warranty applies only to products in ordinary household use, and the consumer is
responsible for the items listed below:
1. Proper use of the appliance in accordance with the instructions provided with the product.
2. Routine maintenance and cleaning necessary to keep the good working condition.
3. Proper installation by an authorized service professional in accordance with instructions provided
with the appliance and in accordance with all local plumbing, electrical and / or gas codes.
4. Proper connection to a grounded power supply of sufficient voltage, replacement of blown
fuses, repair of loosened connections or defects in house wiring.
5. Expenses for making the appliance accessible for servicing.
6. Damages to finish after installation.
YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT
REPAIR OR REPLACEMENT AS PROVIDED HEREIN. Service must be provided by a Midea designated
service company. This limited warranty is valid only in the 50 States of the United States or Canada
and applies only when the major appliance is used in the country in which it was purchased. This
limited warranty is eective from the date of original consumer purchase. Proof of original purchase
date is required to obtain service under this limited warranty.
EN
20
WHAT IS NOT COVERED
1. Failure caused by damage to the unit while in your possession (other than damage caused
by defect or malfunction), by its improper installation, or by unreasonable use of the product,
including without limitation, failure to provide reasonable and necessary maintenance or to
follow the written Installation and Instruction Manual.
2. Products purchased as-is” or refurbished are not covered by this warranty.
3. Food loss caused by refrigerator or freezer failure.
4. Service calls to repair or replace consumables such as water filters, light bulbs airfilters etc., or
handles, knobs and other cosmetic parts.
5. Product that has been transferred from its original owner.
6. Interior or exterior rust on the unit.
7. Damages caused by services performed by persons other than authorized Midea servicers; use
of parts other than Midea replacement parts; obtained from persons other than such Midea
customer service; or external causes such as abuse, misuse, inadequate power supply or acts of
God.
8. Service calls resulting from improper installation of your product.
9. Service calls to instruct you on the use of your product.
10. Surcharges including, but not limited to, any after hour, weekend, or holiday service calls, tolls,
ferry trip charges, or mileage expense for service calls to remote areas, including the state of
Alaska.
11. If the unit is put to commercial, business, rental, or other use or application other than for
consumer use, we make no warranties, express or implied, including but not limited to, any
implied warranty of merchantablility or fitness for particular use or purpose.
12. Product that has been removed outside the USA or Canada.
13. Products without original serial numbers or products that have serial numbers which have been
altered or cannot be readily determined.
NOTE: Some states do not allow the exclusion or limitation of incidental or consequential damages.
So this limitation or exclusion may not apply to you.
The cost of repair or replacement under these excluded circumstances shall be borne by the
customer.
DISCLAIMER OF IMPLIED WARRANTIES
IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO ONE
YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW. Some states and provinces do not allow
limitations on the duration of implied warranties of merchantability or fitness, so this limitation may
not apply to you. This warranty gives you specific legal rights, and you also may have other rights
that vary from state to state or province to province.
DISCLAIMER OF REPRESENTATIONS OUTSIDE OF WARRANTY
Midea makes no representations about the quality, durability, or need for service or repair of this
major appliance other than the representations contained in this warranty. If you want a longer or
more comprehensive warranty than the limited warranty that comes with this major appliance, you
should ask Midea or your retailer about buying an extended warranty.
LIMITATION OF REMEDIES; EXCLUSION OF INCIDENTAL AND CONSEQUENTIAL DAMAGES
YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE
PRODUCT REPAIR AS PROVIDED HEREIN. MIDEA SHALL NOT BE LIABLE FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES. Some states and provinces do not allow the exclusion or limitation of
incidental or consequential damages, so these limitations and exclusions may not apply to you. This
warranty gives you specific legal rights, and you also may have other rights that vary from state to
state or province to province.
05/19
EN
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40

Midea MRT18B2ASL Manuel utilisateur

Catégorie
Congélateurs
Taper
Manuel utilisateur

dans d''autres langues